EZDIY-FAB PCIE Gen 4 16x Extreme Flexible, High Speed Riser Cable PCI Express 4.0 Port GPU Extension Card-Right Angle Connector [11.8in/30cm]
Asin: B09NBBCVHQ | Model: US-Soft PCIE 4.0-30CM-90 | PartNumber: US-Soft PCIE 4.0-30CM-90
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Advanced Technology Of Ultra Soft Cable Features As A 7.87In/200Mm Slim, Flat And Foldable Design For Better Cable Management Combining Elegance With Functionality..
Compatible With Graphics Cards - Rtx3090, Rtx3080ti, Rtx3080, Rtx3070ti, Rtx3070, Rtx3060ti, Rtx3060, Rx6900xt, Rx6800xt, Rx6800, Rx6700xt, Rx6600xt, And More / Chipset - X570, B550, Z690, B660 And Future New Gen4 Gpus & Chipsets.
Re-Designed Cables And Connectors, Ensure Minimal Signal Delay And Electromagnetic Interference-Free Operation..
Right Angle Connector Avoid Pressing The Cable, Stable Transmission, Easy To Install..
Features
- High stability and full PCIe Gen4 x16 speed, plug and play.Backward-compatible with PCIE 3.0/PCIE 2.0/PCIE 1.0.
- Right angle connector avoid pressing the cable, stable transmission, easy to install.
- Advanced technology of ultra soft cable features as a 7.87in/200mm slim, flat and foldable design for better cable management combining elegance with functionality.
- Re-designed cables and connectors, ensure minimal signal delay and electromagnetic interference-free operation.
- Compatible with graphics cards - RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, and MORE / Chipset - X570, B550, Z690, B660 and future new Gen4 GPUs & Chipsets
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon Similar To EZDIYFAB PCIE Gen 4 16x
#1
AsiaHorse PCIE 4.0 Extension Cable, White 16x Shielded High Speed GPU Riser Cable with PCI Express Port for GPU Extension Card, Length 25cm
Asin: B0BFQTCYP2 | Model: PCIE4.0-90 | PartNumber: PCIE4.0-90
With Segmented Design, This Gpu Riser Cable Allows For Airflow, Making It Easy To Reduce Operating Temperature And Improve Overall System Performance..
Compatible With Most Gpu/Motherboard Components And Fits Most Cases. Supports Pcie 4.0/3.0/2.0/1.0, Compatible With Rtx4090, Rtx4070ti, Rtx3090ti, Rtx3090, And More, Rtx3090, Rtx3080, Rtx3070, Rtx3060ti, Rx6900xt, Rx6800 Etc.
Plug And Play, No Bios Setup Required. Featuring A Unique Cable Protector That Effectively Enhances The Durability Of The Extender As Well As Prevents Cable Damage, Even If The Extender Is Folded Or Twisted, This Gpu Extension Cable Provides The Best Connectivity And Lifespan..
Imported Silver-Plated Cable With Up To 64Gbs, In Line With Pcie 4.0 Transmission Standard And Remains Backward Compatible With A Maximum Transfer Speed. Enhanced 12V Power Supply With 12Pin Silver-Plated Cable Delivers 12V To Meet The Needs Of 4090 High-Power Graphics Cards..
Features
- AsiaHorse pcie 4.0 riser cable adopt high quality hand-soldered gold pin, allowing for maximum conductivity and ensure signal integrity. Using imported cables with pure copper tinned cores, this psu cable extension gives you full-speed, stable and almost attenuation-free signal transmission.
- Imported silver-plated cable with up to 64GBS, in line with PCIE 4.0 transmission standard and remains backward compatible with a maximum transfer speed. Enhanced 12V power supply with 12PIN silver-plated cable delivers 12V to meet the needs of 4090 high-power graphics cards.
- With segmented design, this gpu riser cable allows for airflow, making it easy to reduce operating temperature and improve overall system performance.
- Plug and play, no BIOS setup required. Featuring a unique cable protector that effectively enhances the durability of the extender as well as prevents cable damage, even if the extender is folded or twisted, this gpu extension cable provides the best connectivity and lifespan.
- Compatible with most GPU/motherboard components and fits most cases. Supports PCIE 4.0/3.0/2.0/1.0, compatible with RTX4090, RTX4070ti, RTX3090ti, RTX3090, and MORE, RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800 etc
- See more on Amazon...
Brand: AsiaHorse | Manufacturer: AsiaHorse
Warranty: 2Years
See On Amazon #2
EZDIY-FAB Vertical Graphics Card Holder Bracket with ARGB 5V 3Pin LED,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- Black
Asin: B08R9PDBTD | Model: US-3528 RGB GPU Bracket-B-with new riser | PartNumber: US-3528 RGB GPU Bracket-B-with new riser
Designed For Most Atx Case With At Least 7 Pcie Slots In The Market.
Only Supports Pcie 3.0.: If You Intend To Use A Pcie 4.0 Graphics Card, You Will Need To Enter The Bios And Adjust The Pcie Slot To Gen3 Mode, As The Riser Only Supports Pcie 3.0..
With Movable Bracket, More Flexible In Using Pc Case Interior Space. Note: Please Check Your Case With Enough Space.
Note: Ensure The Pcie Cable Is Fully And Securely Inserted Into The Socket! Please Make Sure The Male Connector (Gold Fingers) Is Fully Inserted Into The Motherboard’S Pcie Socket. Our Riser Has A Very Short Pin Designed To Provide Better Insertion Loss. The Pins May Not Be In Full Contact With The Pcie Socket Pins Resulting In Signal Lanes Drop From X16 To X8, Or Worse At X4 Speed..
The 20Cm/7.8In Pcie Riser With High Quality Tpe Cable And Sectional Design Allows Air Ventilation And Lowers Working Temperatures For Better Overall System Performance..
Vertically Display A Gpu Graphics Card, Compatible With Most Brand's Graphic Card, Show Off The Visual Design Of The Gpu And Its Cooler..
Features
- Vertical GPU Bracket with RGB LED effects, Synchronizable RGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 pin RGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED.
- Vertically display a GPU graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler.
- Designed for most ATX case with at least 7 PCIE slots in the market
- The 20cm/7.8in PCIE riser with high quality TPE cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance.
- With movable bracket, More flexible in using PC case interior space. NOTE: Please check your case with enough space
- Note: Ensure the pcie cable is fully and securely inserted into the socket! Please make sure the male connector (Gold Fingers) is fully inserted into the motherboard s PCIe socket. Our riser has a very short pin designed to provide better insertion loss. The pins may not be in full contact with the PCIe socket pins resulting in signal lanes drop from x16 to x8, or worse at x4 speed.
- Only supports PCIe 3.0.: If you intend to use a PCIe 4.0 graphics card, you will need to enter the BIOS and adjust the PCIe slot to Gen3 mode, as the riser only supports PCIe 3.0.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #3
EZDIY-FAB Vertical GPU Mount with High-Speed PCIE 4.0 Riser Cable, ARGB Module, 115mm/4.52in Flexible Extension, 90 Degree Connector, Only Compatible to Full-Opened PCIe Slots-Black-YIHPI344-2
Asin: B0CP3MWVB9 | Model: YIHPI344-2 | PartNumber: YIHPI344-2
Vertical Display Made Simple And Sturdy: Designed For Effortless Installation, This Mount Enables A Stunning Vertical Presentation Of Your Gpu. The Added Adjustable Support Screw Ensures A Distinctive And Stands Out With Added Stability..
Amazing Argb Lighting: Elevate Your System's Aesthetics With Synchronizable Argb Lighting, Compatible With Leading Software Like Aura, Mystic, And Fusion. Note: This Mount Is Not Compatible With 12V 4-Pin Rgb Headers..
Bidirectional Locking Structure: Constructed With Superior Steel, This Component Is Designed With A Bidirectional Locking Structure, Offering Robust, Multi-Directional Support, Ensuring Heavy Graphics Cards Are Held Firmly In Place..
Precisely Engineered Riser Cable: The Pcie 4.0 Riser Cable Features A Carefully Angled Connector And An Ideal Length Of 115Mm/4.52In, Ensuring A Perfect Fit Without The Risk Of Bending Or Crimping, Thereby Protecting Your Motherboard Connectors From Potential Damage..
Features
- Optimized for Full PCI Slot Cases: Tailored for enclosures with 7 opened PCIe slots, this vertical GPU mount is ideal for RTX40 series; 3-slot graphics cards, requiring a case of minimum of 8 slots for optimal fit and stability.
- Precisely Engineered Riser Cable: The PCIe 4.0 riser cable features a carefully angled connector and an ideal length of 115mm/4.52in, ensuring a perfect fit without the risk of bending or crimping, thereby protecting your motherboard connectors from potential damage.
- Vertical Display Made Simple and Sturdy: Designed for effortless installation, this mount enables a stunning vertical presentation of your GPU. The added adjustable support screw ensures a distinctive and stands out with added stability.
- Bidirectional Locking Structure: Constructed with superior steel, this component is designed with a bidirectional locking structure, offering robust, multi-directional support, ensuring heavy graphics cards are held firmly in place.
- Amazing ARGB Lighting: Elevate your system's aesthetics with synchronizable ARGB lighting, compatible with leading software like AURA, Mystic, and Fusion. Note: This mount is not compatible with 12V 4-pin RGB headers.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #4
LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX4090 RX6950XT x570 B550 Z690 Tested] Shielded High-Speed Vertical Mount Gaming PCI Express Gen4 Universal 90 Degree Socket {20cm / 7.8"} 3.0 Gen3 Compatible
Asin: B08XN26DRZ | Model: PCIE4EXT11SR-020 | PartNumber: PCIE4EXT11SR-020 | Ean: 0882991008735, 0882991008056 | UPC: 882991008735, 882991008056
Over 64Gb/S (Bi-Directional) True Pcie 4.0 Performance Riser Via Rare Shielded Extreme High-Speed Wires And Dedicated Power Lines For Lossless Signals At Range. Re-Engineered Wires And Connectors For Pcie 4.0 85Ohm Applications For Gpus, M.2 Nvme Ssd. Quality Hand Soldered Gold-Plated Contacts For Signal Integrity..
【2024 New Pcie 5.0 Gen 5 Riser Cable (Ava5) Right Angle 10Cm ~ 70Cm: ( Https://Www.Amazon.Com/Dp/B0cc3p5zlh ) 】 【2023 Pcie 4.0+ Riser Cable (Ava4) Right Angle: ( Https://Www.Amazon.Com/Dp/B0b4t7klp7 ) 】 【Ultra Mini-Itx Pcie 4.0 Riser Cable: ( Https://Www.Amazon.Com/Dp/B092jsv8z4 ) 】 【Extreme+ Pcie 4.0 Riser Cable: ( Https://Www.Amazon.Com/Dp/B0924zklrb ) 】.
Unique Individual Laneway Shielding Prevents External Emi/Rfi And Interference Between Channels. Sectional Design Allows Air Ventilation And Lowers Working Temperatures For Better Overall System Performance. Backed By Linkup Limited 1-Year Warranty And Complimentary Premium Online Support. *** Compatible With Most Gpu/Motherboard Components And Fits Most Cases..
Screws Are Not Recommended For The Riser Cable. Some Cases May Have Mis-Align Screw Holes And May Cause The Gpu To Be Off Alignment When Installed, Causing Damage To The Gpu And The System. Please Install The Riser Cable Onto The Gpu First Before Securing The Gpu With I/O Bracket Mount. *Please Do Not Use The Screws To Mount The Tt P8 Case (The Gpu Can Still Be Secured By The Two Screws On The Pcie Slots In The Case).
Features
- Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX4090, RTX3090ti, RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6950XT, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690, and future new GPUs & Chipsets.
- Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount. *Please do not use the screws to mount the TT P8 case (the GPU can still be secured by the two screws on the PCIE slots in the case)
- Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity.
- Unique individual laneway shielding prevents external EMI/RFI and interference between channels. Sectional design allows air ventilation and lowers working temperatures for better overall system performance. Backed by LINKUP Limited 1-Year Warranty and complimentary Premium Online Support. *** Compatible with most GPU/motherboard components and fits most cases.
- 2024 New PCIE 5.0 Gen 5 Riser Cable (AVA5) Right Angle 10cm ~ 70cm: ( https://www.amazon.com/dp/B0CC3P5ZLH ) 2023 PCIE 4.0+ Riser Cable (AVA4) Right Angle: ( https://www.amazon.com/dp/B0B4T7KLP7 ) Ultra mini-ITX PCIE 4.0 Riser Cable: ( https://www.amazon.com/dp/B092JSV8Z4 ) Extreme+ PCIE 4.0 Riser Cable: ( https://www.amazon.com/dp/B0924ZKLRB )
- See more on Amazon...
Brand: LINKUP | Manufacturer: LINKUP Technology Inc.
See On Amazon #5
EZDIY-FAB Vertical GPU Mount with High-Speed PCIE 4.0 Riser Cable, Shield Series, 115mm/4.52in Flexible Extension, 90 Degree Connector, Only Compatible to Full-Opened PCIe Slots-Black-YIHPI344
Asin: B0CP3LHDZJ | Model: YIHPI344 | PartNumber: YIHPI344
Vertical Display Made Simple And Sturdy: Designed For Effortless Installation, This Mount Enables A Stunning Vertical Presentation Of Your Gpu. The Added Adjustable Support Screw Ensures A Distinctive And Stands Out With Added Stability..
Shield Series Design: Highlighting The Durability And Solid Protection The Component Offers, Combined With A Sleek Design That Embodies The Artistry Of Esports Aesthetics..
Bidirectional Locking Structure: Constructed With Superior Steel, This Component Is Designed With A Bidirectional Locking Structure, Offering Robust, Multi-Directional Support, Ensuring Heavy Graphics Cards Are Held Firmly In Place..
Precisely Engineered Riser Cable: The Pcie 4.0 Riser Cable Features A Carefully Angled Connector And An Ideal Length Of 115Mm/4.52In, Ensuring A Perfect Fit Without The Risk Of Bending Or Crimping, Thereby Protecting Your Motherboard Connectors From Potential Damage..
Features
- Optimized for Full PCI Slot Cases: Tailored for enclosures with 7 opened PCIe slots, this vertical GPU mount is ideal for RTX40 series; 3-slot graphics cards, requiring a case of minimum of 8 slots for optimal fit and stability.
- Precisely Engineered Riser Cable: The PCIe 4.0 riser cable features a carefully angled connector and an ideal length of 115mm/4.52in, ensuring a perfect fit without the risk of bending or crimping, thereby protecting your motherboard connectors from potential damage.
- Vertical Display Made Simple and Sturdy: Designed for effortless installation, this mount enables a stunning vertical presentation of your GPU. The added adjustable support screw ensures a distinctive and stands out with added stability.
- Bidirectional Locking Structure: Constructed with superior steel, this component is designed with a bidirectional locking structure, offering robust, multi-directional support, ensuring heavy graphics cards are held firmly in place.
- SHIELD Series Design: Highlighting the durability and solid protection the component offers, combined with a sleek design that embodies the artistry of esports aesthetics.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #6
EZDIY-FAB 5V ARGB GPU Holder Brace Graphics Card GPU Support Video Card Holder Bracket, Strenchable Structure, Video Card Sag Holder/Holster Bracket Support RX7990XTX, RTX4090, Black-341
Asin: B0BPHKCTGJ | Model: YIHPI341 | PartNumber: YIHPI341
Double Bracket Feet To Provide Superior Stability For Your Graphics Card, With Added Flexibility To Install The Each Feet Separately Or Together For Greater Compatibility With A Range Of Gpu Configurations..
Synchronizable Argb Lighting Via Motherboard: Built With The Advanced Argb Lighting System,Support 5V 3Pin Argb Motherboard Synchronization, Multiple Rgb Modes Can Be Switched,Makes Your Computer Case Colorful.* *Please Never Connect It To 4Pin 12Vrgb..
Experience Durable And Stable Support With Our All-Metal Bracket Structure, Complemented By A Sleek Anodized Sandblasted Aluminum Panel For A Stylish And Sophisticated Look..
Features A Stretchable Design That Provides Up To 30Mm Of Expandable Space, Allowing It To Accommodate Graphics Cards Of Varying Sizes With Ease. Its Expandable Nature Enables It To Adjust Both Inward And Outward To Securely Hold The Graphics Card In Place..
Features
- The Slide Type Support Structure is a flexible mechanism that can support GPUs of different lengths (174-280 mm), providing secure installation and adaptability.
- Features a stretchable design that provides up to 30mm of expandable space, allowing it to accommodate graphics cards of varying sizes with ease. Its expandable nature enables it to adjust both inward and outward to securely hold the graphics card in place.
- Double bracket feet to provide superior stability for your graphics card, with added flexibility to install the each feet separately or together for greater compatibility with a range of GPU configurations.
- Experience durable and stable support with our all-metal bracket structure, complemented by a sleek anodized sandblasted aluminum panel for a stylish and sophisticated look.
- Synchronizable ARGB lighting via motherboard: Built with the advanced ARGB lighting system,support 5V 3PIN ARGB motherboard synchronization, multiple rgb modes can be switched,makes your computer case colorful.* *Please never connect it to 4pin 12VRGB.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #7
EZDIY-FAB New PCI Express 16x Flexible Cable Extension Port Adapters, High Speed PCIE Riser Cable 90 Degrees, Fit with FD R6 Case -20cm
Asin: B0731F743X | Model: CA-NEW PCIE20CM-90-1 | PartNumber: CA-NEW PCIE20CM-90-1 | Ean: 0714559210956 | UPC: 714559210956
Extremely High Speed Cable Allow Pci Express Video Card In Any Direction On Suitable Position.Supports Pcie3.0/2.0/1.0, Doesn't Support Pcie4.0, Don't Bend Cable Excessively, Which Will Cause Poor Signal..
Compatible With Most Gpu/Motherboard Components One Year Warranty, Buy With Confidence.
Foiled Cable For High-Frequency Impedance And Emi Design/ Golden Plated Contacts For Best Connectivity And Long Life.
High Quality Solder Points And Gold Plated Contacts For The Best Conductivity And Long Use.
Features
- New design with vertical 90 degrees connecter for any types to mounting GPU
- High Quality Solder Points and Gold plated Contacts for the Best Conductivity and Long Use
- Extremely High speed cable allow PCI express video card in any direction on suitable position.Supports PCIE3.0/2.0/1.0, Doesn't Support PCIE4.0, Don't bend cable excessively, which will cause poor signal.
- Foiled cable for High-frequency impedance and EMI design/ Golden plated contacts for best connectivity and long life
- Compatible with most GPU/motherboard components One year warranty, buy with confidence
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #8
EZDIY-FAB GPU Power Sleeved Cable Extension, 16pin(12+4) 12VHPWR PCIe 5.0 Connector Male to 3X PCIE 8 PIN for RTX 4070Ti/4080/3090Ti, with Pre-Installed Cable Combs-16AWG/White
Asin: B0BN6CD1CH | Model: EZDPR186 | PartNumber: EZDPR186
The Cable Material Is Made Of 16Awg Tinned Copper, And The Terminal Is Made Of Alloy Copper, Providing Support For A Maximum Output Of 600W, Stable Performance And Safety Under High-Load Use, No Frame Drop , No Screen Flickering, And Continuous Power Supply..
Featured With 4 Pcs Of Cable Comb, The Appearance Of The Cable Is Well-Organized, Allowing You To Easily Achieve Clean Cable Management And Unified Design..
Please Note That The Gpu Sleeved Extension Cable Is Not Suitable For 12Pin Geforce Rtx 30' Series Gpu. Only Support 12+4Pin 4080/3090Ti Gpu..
This 1 To 3X 8 Pin Sleeved Extension Cable Replaces The Complex Connection Configuration Of The Original 1 To 3X 8 Pin Cable, Which's Configuration Is Unsightly And Unsafe. Use The Ezdiy-Fab Extension Cable, The Best Solution For Safety And Aesthetics..
This Cable Is Only Extension Cable. Please Do Not Plug It Directly Into You Psu. Please Use A Power Supply With Sufficient Power According To The Manufacturer's Instructions. Generally, It Is Recommended To Use A Psu Of 1000W Or More To Match The Graphics Card Rtx4080/3090Ti..
Features
- Dedicated design for the specs of 12VHPWR PCIe 5.0 Graphics Card, Connect to RTX3090ti GPU without hassle, connecting to PCIe 8 PIN Cable from PSU to get a stable and reliable performance.
- This cable is only extension cable. Please do not plug it directly into you PSU. Please use a power supply with sufficient power according to the manufacturer's instructions. Generally, it is recommended to use a PSU of 1000W or more to match the graphics card RTX4080/3090ti.
- The cable material is made of 16AWG tinned copper, and the terminal is made of alloy copper, providing support for a maximum output of 600W, stable performance and safety under high-load use, no frame drop , no screen flickering, and continuous power supply.
- This 1 to 3x 8 Pin Sleeved extension cable replaces the complex connection configuration of the original 1 to 3x 8 Pin cable, which's configuration is unsightly and unsafe. Use the EZDIY-FAB extension cable, The best solution for safety and aesthetics.
- Featured with 4 pcs of cable comb, the appearance of the cable is well-organized, allowing you to easily achieve clean cable management and unified design.
- Please note that the GPU sleeved extension cable is not suitable for 12pin GeForce RTX 30' Series GPU. Only support 12+4pin 4080/3090TI GPU.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #9
LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX4090 RX6950XT x570 B550 Z690 Tested] Shielded High-Speed Vertical Mount Gaming PCI Express Gen4 Dual Reverse Connectors (19cm / 7.4") Designed for ITX
Asin: B092JS4WGJ | Model: PCIE4EXT11VV-019 | PartNumber: PCIE4EXT11VV-019 | Ean: 0882991007851 | UPC: 882991007851
Over 64Gb/S (Bi-Directional) True Pcie 4.0 Performance Riser Via Rare Shielded Extreme High-Speed Wires And Dedicated Power Lines For Lossless Signals At Range. Re-Engineered Wires And Connectors For Pcie 4.0 85Ohm Applications For Gpus, M.2 Nvme Ssd. Quality Hand Soldered Gold-Plated Contacts For Signal Integrity..
【2024 New Pcie 5.0 Gen 5 Riser Cable (Ava5) Right Angle 10Cm ~ 70Cm: ( Https://Www.Amazon.Com/Dp/B0cc3p5zlh ) 】 【2023 Pcie 4.0+ Riser Cable (Ava4) Right Angle: ( Https://Www.Amazon.Com/Dp/B0b4t7klp7 ) 】 【Popular Ultra Pcie 4.0 Riser Cable: ( Https://Www.Amazon.Com/Dp/B08xn26drz ) 】 【Extreme+ Pcie 4.0 Riser Cable: ( Https://Www.Amazon.Com/Dp/B0924zklrb ) 】.
Unique Individual Laneway Shielding Prevents External Emi/Rfi And Interference Between Channels. Sectional Design Allows Air Ventilation And Lowers Working Temperatures For Better Overall System Performance. *** Compatible With Most Gpu/Motherboard Components And Fits Most Cases. *Overclock Is Not Recommended And May Cause System Instability. Backed By Linkup Limited 1-Year Warranty And Complimentary Premium Online Support..
Screws Are Not Recommended For The Riser Cable. Some Cases May Have Mis-Align Screw Holes And May Cause The Gpu To Be Off Alignment When Installed, Causing Damage To The Gpu And The System. Please Install The Riser Cable Onto The Gpu First Before Securing The Gpu With I/O Bracket Mount. *Please Do Not Use The Screws To Mount The Tt P8 Case (The Gpu Can Still Be Secured By The Two Screws On The Pcie Slots In The Case).
Features
- Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. Compatible with GPU - RTX4090, RTX3090ti, RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6950XT, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690 / NZXT H1, and future new GPUs & Chipsets. ***Special Note: Tested to be compatible with mini-ITX MB + RTX3090, RTX3080, RX6800, & RX7900 GPUs. Recommended with mini-ITX MB + RTX30 RTX40 GPUs and RX6000, RX7000 series GPUs.
- Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount. *Please do not use the screws to mount the TT P8 case (the GPU can still be secured by the two screws on the PCIE slots in the case)
- Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity.
- Unique individual laneway shielding prevents external EMI/RFI and interference between channels. Sectional design allows air ventilation and lowers working temperatures for better overall system performance. *** Compatible with most GPU/motherboard components and fits most cases. *Overclock is not recommended and may cause system instability. Backed by LINKUP Limited 1-Year Warranty and complimentary Premium Online Support.
- 2024 New PCIE 5.0 Gen 5 Riser Cable (AVA5) Right Angle 10cm ~ 70cm: ( https://www.amazon.com/dp/B0CC3P5ZLH ) 2023 PCIE 4.0+ Riser Cable (AVA4) Right Angle: ( https://www.amazon.com/dp/B0B4T7KLP7 ) Popular Ultra PCIE 4.0 Riser Cable: ( https://www.amazon.com/dp/B08XN26DRZ ) Extreme+ PCIE 4.0 Riser Cable: ( https://www.amazon.com/dp/B0924ZKLRB )
- See more on Amazon...
Brand: LINKUP | Manufacturer: LINKUP Technology Inc.
Weight: 0.24 pounds
See On Amazon #10
EZDIY-FAB PCIE Gen 4 16x Extreme Flexible, High Speed Riser Cable PCI Express 4.0 Port GPU Extension Card-Straight Connector [7.87in/20cm]
Asin: B09NB9D9PH | Model: US-Soft PCIE 4.0-20CM-180 | PartNumber: US-Soft PCIE 4.0-20CM-180
Advanced Technology Of Ultra Soft Cable Features As A 7.87In/200Mm Slim, Flat And Foldable Design For Better Cable Management Combining Elegance With Functionality..
Compatible With Graphics Cards - Rtx3090, Rtx3080ti, Rtx3080, Rtx3070ti, Rtx3070, Rtx3060ti, Rtx3060, Rx6900xt, Rx6800xt, Rx6800, Rx6700xt, Rx6600xt, And More / Chipset - X570, B550, Z690, B660 And Future New Gen4 Gpus & Chipsets..
Re-Designed Cables And Connectors, Ensure Minimal Signal Delay And Electromagnetic Interference-Free Operation..
Right Angle Connector Avoid Pressing The Cable, Stable Transmission, Easy To Install..
Features
- High stability and full PCIe Gen4 x16 speed, plug and play.Backward-compatible with PCIE 3.0/PCIE 2.0/PCIE 1.0.
- Right angle connector avoid pressing the cable, stable transmission, easy to install.
- Advanced technology of ultra soft cable features as a 7.87in/200mm slim, flat and foldable design for better cable management combining elegance with functionality.
- Re-designed cables and connectors, ensure minimal signal delay and electromagnetic interference-free operation.
- Compatible with graphics cards - RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, and MORE / Chipset - X570, B550, Z690, B660 and future new Gen4 GPUs & Chipsets.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #11
GLOTRENDS PCIe 4.0 X16 GPU Riser Cable Length 200mm, Female 90 Degree Angle, Compatible with Gen 4 GPUs, Such as RTX4090-RTX3060, RX7900, RX6950XT-RX6500XT,etc (PCIE40-20-90)
Asin: B0BJBG13P7 | Model: PCIE40-X16-200MM-90D | PartNumber: PCIE40-X16-200MM-90D
90 Degree Angle At Female Side For Gpu Vertically Mounting To Pc Chassis. Please Ensure That The Back Panel Of The Chassis Has Vertical Fixing Slots For Gpu Vertically Installation.
Several Separate Ribbon Cable Design Make It Softer And More Flexible. When The Gpu Mounting Position Is Shifted A Bit, It Doesn't Affect The Performance..
To Achieve Pcie 4.0 Speeds, Both The Cpu And Motherboard Pcie Slots Need To Support Pcie 4.0. Please Note That Pcie 4.0 Is Only Supported By Intel 11Th Generation Cpus And Above..
Emi Shielded Design Ensures Signal Integrity And Full Speed Performance..
Full Compatible With Gen 4.0 Gpu, Such As Rtx4090, Rtx3090ti, Rtx3090, Rtx3080ti, Rtx3080, Rtx3070ti, Rtx3070, Rtx3060ti, Rtx3060, Rx7900, Rx6950xt, Rx6900xt, Rx6800xt, Rx6800, Rx6700xt, Rx6600xt, Rx6500xt, Etc..
Ribbon Cable Length = 200 Mm (Not Including The Pcie Ports). Before Purchasing, Be Sure To Measure The Needed Length Of The Pcie Extension Cable Based On The Placement Of The Graphics Card In The Chassis..
Features
- PCI-Express 4.0 x16 riser cable (200mm Length, Male to Female 90 Degree Angle) for GPU and PCIe host adapter. Backward compatible with PCIe 3.0/2.0/1.0.
- Ribbon cable length = 200 mm (not including the PCIe ports). Before purchasing, be sure to measure the needed length of the PCIe extension cable based on the placement of the graphics card in the chassis.
- 90 Degree Angle at female side for GPU vertically mounting to PC chassis. Please ensure that the back panel of the chassis has vertical fixing slots for GPU vertically installation
- Full compatible with gen 4.0 GPU, such as RTX4090, RTX3090ti, RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX7900, RX6950XT, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT, etc.
- To achieve PCIe 4.0 speeds, both the CPU and motherboard PCIe slots need to support PCIe 4.0. Please note that PCIe 4.0 is only supported by Intel 11th generation CPUs and above.
- EMI shielded design ensures signal integrity and full speed performance.
- Several separate ribbon cable design make it softer and more flexible. When the GPU mounting position is shifted a bit, it doesn't affect the performance.
- See more on Amazon...
Brand: GLOTRENDS | Manufacturer: glotrends
Dimensions: 4.72 x 9.84 x 4.72 inches
Warranty: 12 Month Warranty
See On Amazon #12
ELUTENG 1X to 16X PCIe Adapter for GPU Mining Rig 4 Solid Capacitors Powered Pcie Extender with 60cm 6Pin USB 3.0 Cable PCIe Riser 4PIN/6PIN/SATA 3-Pack
Asin: B09HHGGRLP
【3 Power Supply Methods】3 Power Supply Methods Are Used: Sata Power Interface, 6Pin Power Interface (Double), And Peripheral 4-Pin Power Supply. The Power Can Be Plugged Into Any Interface To Work Normally. The Graphics Card Has An Independent Power Supply To Reduce The Load On The Motherboard. You Can Freely Choose According To The Actual Use Environment; At The Same Time, It Is Equipped With Led Power Indicator And Working Indicator, Which Can Clearly Check The Power And Working Conditions..
【Strong Compatibility】It Has A Wide Range Of Compatibility And Can Be Compatible With The Motherboard 1X, 4X, 8X, 16X Pci-E Slots, Used For Operating Systems: Windows, Mac, Linux..
【Safety Cable】Using (60Cm) Usb 3.0 Gold-Plated Interface Cable, Which Can Improve Connectivity, Life And Performance. As The Latest Expansion Card In 2017 (2022), We Are Equipped With A Stable Cable To Ensure Signal Integrity And Support High Loads During Mining..
【Metal Graphics Card Slot】 The Graphics Card Slot In The Middle Is A Reinforced Metal Structure. Compared With The Plastic Bayonet, The Metal Bayonet Has A Tighter Structure. The Slot Has A Fixed Buckle, Which Is Convenient For Removing And Fixing The Graphics Card, So That The Graphics Card Will Not Get Out Of The Slot. Note: Please Refer To Picture 3. Please Pay Attention To The Direction Of The Graphics Card During Installation To Prevent The Graphics Card From Being Burnt..
Features
- 8 High-quality solid capacitors 8 FP independent solid capacitors are customized for the graphics card power supply. Compared with the general 4 capacitors, the graphics card power supply can be more stable and safe. The extension cord has a 6Pin interface to strengthen the power supply, effectively solving the problem of insufficient power supply capacity.
- Metal graphics card slot The graphics card slot in the middle is a reinforced metal structure. Compared with the plastic bayonet, the metal bayonet has a tighter structure. The slot has a fixed buckle, which is convenient for removing and fixing the graphics card, so that the graphics card will not get out of the slot. Note: Please refer to Picture 3. Please pay attention to the direction of the graphics card during installation to prevent the graphics card from being burnt.
- 3 power supply methods 3 power supply methods are used: SATA power interface, 6Pin power interface (Double), and peripheral 4-pin power supply. The power can be plugged into any interface to work normally. The graphics card has an independent power supply to reduce the load on the motherboard. You can freely choose according to the actual use environment; At the same time, it is equipped with LED power indicator and working indicator, which can clearly check the power and working conditions.
- Safety cable Using (60CM) USB 3.0 gold-plated interface cable, which can improve connectivity, life and performance. As the latest expansion card in 2017 (2022), we are equipped with a stable cable to ensure signal integrity and support high loads during mining.
- Strong compatibility It has a wide range of compatibility and can be compatible with the motherboard 1x, 4x, 8x, 16x PCI-E slots, used for operating systems: Windows, Mac, Linux.
- See more on Amazon...
Brand: ELUTENG | Manufacturer: ELUTENG
See On Amazon #13
EZDIY-FAB PCIe 4.0 GPU Mount Bracket, Multi-Angle Adjustment with All White Riser Cable, Compatible to RTX4090, 4080, 4070ti - White
Asin: B0BXN45N4D | Model: YIHPI333-17 | PartNumber: YIHPI333-17
Wide Compatibility: Supports Most 2 And 3 Slot Graphics Cards, And Made Of High-Quality Metal Material For Increased Structural Toughness.
Please Test The Riser Cable Onto The Gpu First Before Installing The Gpu To Vertical Bracket Mount./ Please Refer To Length Spec Image And Confirm That There Is Enough Space Of Your Chassis..
Compatible With Latest Models: Features Gen4 Riser Cable And Compatible With Rtx 4090, Rtx 4080, Rtx 4070Ti, Rtx 30' Series, And Rx70' Series. Prior Testing Of Riser Cable Onto Gpu Is Recommended. Please Refer To Length Spec Image To Confirm Compatibility With Your Chassis..
Strong Magnet Base: Equipped With A Magnet For Stable Placement On Psu Shroud.
Features
- Enhance Cooling Efficiency: Adjustable bracket allows mounting of GPU vertically or at an angle for better heat dissipation on PSU shroud or any metal plane
- Strong Magnet Base: Equipped with a magnet for stable placement on PSU shroud
- Wide Compatibility: Supports most 2 and 3 slot graphics cards, and made of high-quality metal material for increased structural toughness
- Compatible with Latest Models: Features Gen4 riser cable and compatible with RTX 4090, RTX 4080, RTX 4070ti, RTX 30' Series, and RX70' Series. Prior testing of riser cable onto GPU is recommended. Please refer to length spec image to confirm compatibility with your chassis.
- Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
Dimensions: 0.01 x 6.30 x 1.57 inches
See On Amazon #14
Sintech Pci-E 16x Riser Card,PCI Express 3.0 16X Male to Female Extension Cable Upward 4 Layer PCB Card
Asin: B0C7CP93X8 | Model: ST731C | PartNumber: ST731C
Golden Plated Contacts For Best Connectivity And Long Life.
No Driver Necessary,Not Support Hot Swappable.
4 Layer Pcb Board Design With Excellent Emi Characteristics.
Features
- It is used as PCI-E 16X slot extension or PCI-E protected slot.
- 4 layer PCB board design with excellent EMI characteristics
- Golden plated contacts for best connectivity and long life
- No Driver necessary,not support hot swappable
- See more on Amazon...
Brand: Sintech | Manufacturer: Sintech Electronic
Warranty: 3 Months
See On Amazon #15
LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX4090 RX6950XT x570 B550 Z690 Tested] Shielded High-Speed Vertical Mount Gaming PCI Express Gen4 Universal 90 Degree Socket {15cm / 5.9"} 3.0 Gen3 Compatible
Asin: B08XMZ8VHZ | Model: PCIE4EXT11SR-015 | PartNumber: PCIE4EXT11SR-015 | Ean: 0882991008049 | UPC: 882991008049
Over 64Gb/S (Bi-Directional) True Pcie 4.0 Performance Riser Via Rare Shielded Extreme High-Speed Wires And Dedicated Power Lines For Lossless Signals At Range. Re-Engineered Wires And Connectors For Pcie 4.0 85Ohm Applications For Gpus, M.2 Nvme Ssd. Quality Hand Soldered Gold-Plated Contacts For Signal Integrity..
【2024 New Pcie 5.0 Gen 5 Riser Cable (Ava5) Right Angle 10Cm ~ 70Cm: ( Https://Www.Amazon.Com/Dp/B0cc3p5zlh ) 】 【2023 Pcie 4.0+ Riser Cable (Ava4) Right Angle: ( Https://Www.Amazon.Com/Dp/B0b4t7klp7 ) 】 【Ultra Mini-Itx Pcie 4.0 Riser Cable: ( Https://Www.Amazon.Com/Dp/B092jsv8z4 ) 】 【Extreme+ Pcie 4.0 Riser Cable: ( Https://Www.Amazon.Com/Dp/B0924zklrb ) 】.
Unique Individual Laneway Shielding Prevents External Emi/Rfi And Interference Between Channels. Sectional Design Allows Air Ventilation And Lowers Working Temperatures For Better Overall System Performance. Backed By Linkup Limited 1-Year Warranty And Complimentary Premium Online Support. *** Compatible With Most Gpu/Motherboard Components And Fits Most Cases..
Screws Are Not Recommended For The Riser Cable. Some Cases May Have Mis-Align Screw Holes And May Cause The Gpu To Be Off Alignment When Installed, Causing Damage To The Gpu And The System. Please Install The Riser Cable Onto The Gpu First Before Securing The Gpu With I/O Bracket Mount. *Please Do Not Use The Screws To Mount The Tt P8 Case (The Gpu Can Still Be Secured By The Two Screws On The Pcie Slots In The Case).
Features
- Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX4090, RTX3090ti, RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6950XT, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690, and future new GPUs & Chipsets.
- Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount. *Please do not use the screws to mount the TT P8 case (the GPU can still be secured by the two screws on the PCIE slots in the case)
- Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity.
- Unique individual laneway shielding prevents external EMI/RFI and interference between channels. Sectional design allows air ventilation and lowers working temperatures for better overall system performance. Backed by LINKUP Limited 1-Year Warranty and complimentary Premium Online Support. *** Compatible with most GPU/motherboard components and fits most cases.
- 2024 New PCIE 5.0 Gen 5 Riser Cable (AVA5) Right Angle 10cm ~ 70cm: ( https://www.amazon.com/dp/B0CC3P5ZLH ) 2023 PCIE 4.0+ Riser Cable (AVA4) Right Angle: ( https://www.amazon.com/dp/B0B4T7KLP7 ) Ultra mini-ITX PCIE 4.0 Riser Cable: ( https://www.amazon.com/dp/B092JSV8Z4 ) Extreme+ PCIE 4.0 Riser Cable: ( https://www.amazon.com/dp/B0924ZKLRB )
- See more on Amazon...
Brand: LINKUP | Manufacturer: LINKUP Technology Inc.
See On Amazon #16
EZDIY-FAB PCIe 5.0 Adapter - 600W 12+4pin, 16pin 12VHPWR GPU Power Connector, 90 Degree Right Angle - Compatible with RTX 3090Ti, 4070Ti, 4080, 4090 Graphics Cards - RVS Type, Red, 1 Pack
Asin: B0CP3MK6GL | Model: EZDPI189-38 | PartNumber: EZDPI189-38
Adopts A 12V2x6 Specification Connector That Is Also Compatible With The 12Vhpwr Connector, Ensuring Full Contact For Safe Current Delivery, Improving Safety In Power Delivery..
Engineered With A Slimmer Profile, This Adapter Maximizes Compatibility, Accommodating A Broader Range Of Graphics Card Configurations. However, It Is Specifically Not Compatible With The Msi Geforce Rtx 4090 Suprim Liquid X 24G. Please Check Compatible List Before Purchasing..
Reinforced Pcb Features A 2Oz Copper And 4-Layer Board Design, Supporting Superior Heat Dissipation And A 600W Power Capacity..
Boasts A Mech-Armor Shield-Style Exterior With A Sleek Aluminum Casing, Which Not Only Enhances The Visual Appeal But Also Contributes To Cooling With Integrated Thermal Venting Channels, Providing A Synergistic Boost To Both Aesthetics And Cooling Performance..
Features
- Our adapter enables an angled connection without any wire bending. This ensures full contact with all cable terminals and eliminates the risk of thermal issues that can occur due to tight bending radii.
- Boasts a mech-armor shield-style exterior with a sleek aluminum casing, which not only enhances the visual appeal but also contributes to cooling with integrated thermal venting channels, providing a synergistic boost to both aesthetics and cooling performance.
- Adopts a 12V2x6 specification connector that is also compatible with the 12VHPWR connector, ensuring full contact for safe current delivery, improving safety in power delivery.
- Reinforced PCB features a 2oz copper and 4-layer board design, supporting superior heat dissipation and a 600W power capacity.
- Engineered with a slimmer profile, this adapter maximizes compatibility, accommodating a broader range of graphics card configurations. However, it is specifically not compatible with the MSI GeForce RTX 4090 Suprim Liquid X 24G. Please check compatible list before purchasing.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #17
EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle (White)
Asin: B096MBB6M1 | Model: YIHPI333-1 | PartNumber: YIHPI333-1
Thanks To Stretchable Structure Design, You Would Be Able To Connect Hdmi, Dp Cable To Your Gpu Without Hassle, Compatible To Pc Chassis With Pci Grilles..
Please Test The Riser Cable Onto The Gpu First Before Installing The Gpu To Vertical Bracket Mount./ Please Refer To Length Spec Image And Confirm That There Is Enough Space Of Your Chassis..
Compatible With Latest Models, Features White Gen4 Riser Cable And Compatible With Rtx 4090, Rtx 4080, Rtx 4070Ti, Rtx 30' Series, And Rx70' Series.
High Quality Material Increases Structural Toughness And Supports The Large Graphics Card Weight On The Market. Beautiful Metal Surface Treatment, Installed In The Chassis To Form A Beautiful Landscape.
Features
- New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots.
- High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape
- Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles.
- Compatible with Latest Models, Features White Gen4 riser cable and compatible with RTX 4090, RTX 4080, RTX 4070ti, RTX 30' Series, and RX70' Series
- Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #18
EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- Black
Asin: B09WR8GWTF | Model: JP-RGB 4.0CM GPU-B | PartNumber: JP-RGB 4.0CM GPU-B
Vertical Gpu Bracket With Argb Led Lighting Effects, Synchronizable Argb Lighting Via Motherboard (Aura, Mystic, Fusion):Support M/B 3 Pin Argb Header (5V, D, G), Please Note : Not Support 4Pin Rgb Header (+12V, G,R,B), 12 Volts Can Destroy Led..
Please Test The Riser Cable Onto The Gpu First Before Installing The Gpu To Vertical Bracket Mount./ Please Refer To Length Spec Image And Confirm That There Is Enough Space Of Your Chassis..
Supports Pcie 4.0/3.0/2.0/1.0,Compatible With Rtx3090, Rtx3080, Rtx3070, Rtx3060ti, Rx6900xt, Rx6800..
Thanks To Stretchable Structure Design, You Would Be Able To Connect Hdmi, Dp Cable To Your Gpu Without Hassle, Compatible To Pc Chassis With Pci Grilles..
High Quality Material Increases Structural Toughness And Supports The Large Graphics Card Weight On The Market. Beautiful Metal Surface Treatment, Installed In The Chassis To Form A Beautiful Landscape..
Features
- New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots.
- High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape.
- Vertical GPU Bracket with ARGB LED lighting effects, Synchronizable ARGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 Pin ARGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED.
- Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles.
- Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis.
- Supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
See On Amazon #19
EZDIY-FAB [20cm PCIE 3.0 16x Extreme High Speed Riser Cable PCI Express Port GPU Extension Card-Straight Connector
Asin: B07MDLYBJ4 | Model: US-NEW PCIE20CM-180 | PartNumber: US-NEW PCIE20CM-180 | Ean: 0753318880771 | UPC: 753318880771
Flexible Sectional Cable Design Allows For Installing In Various Orientations And Better Airflow..
Available In Straight (180°), Right Angled (90°) Connector Variations With Wide Compatibility Mounting Hole..
Supports Pcie3.0/2.0/1.0, Doesn't Support Pcie4.0.
Emi (Electromagnetic Interference) Shielded To Eliminate Signal Interference And Ensure Maximum Performance..
Features
- Imported cable and the core is made of pure copper tinning process, which ensures the signal is full speed, stable and almost no attenuation transmission.
- EMI (electromagnetic interference) shielded to eliminate signal interference and ensure maximum performance.
- Flexible sectional cable design allows for installing in various orientations and better airflow.
- Supports PCIE3.0/2.0/1.0, Doesn't Support PCIE4.0
- Available in straight (180 ), right angled (90 ) connector variations with wide compatibility mounting hole.
- See more on Amazon...
Brand: EZDIY-FAB | Manufacturer: EZDIY-FAB
Dimensions: 0.75 x 10.83 x 5.59 inches
See On Amazon
Looking For Something Else?
Search