Benchmark Tools 388169 6 inch Precision Double Square 4R Graduations Accurate to +/- 0.002 inch Over Length of Blade Hardened Stainless Steel Blade (6" Double Square)
Asin: B09NP5P5XS | Model: 388169 | PartNumber: 388169 | Ean: 0850026388169 | UPC: 850026388169
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.They Have Hardened And Tempered No-Glare Satin Chrome Stainless Steel Blades. Blade Marking Are Precision Photo Etched And Then Black Filled For Easy Readability. Blades Have Quick Reading 4R Markings (1/64Ths And 1/32Nds On One Side And 1/8Ths And 1/16Ths On The Reverse..
Squares Come In A Cardboard Box..
Square Heads Are Cast And Then Precision Machined. Square Head Color Is Cobalt Blue. Square Heads Lock Down Tight Via Locking Knob..
They Are Manufactured In Accordance With Eec Class 1 Accuracy Standards And Are Guaranteed To Be Square To Within 0.002 (Two Thousandths Of An Inch) Over The Length Of Each Blade..
Features
- These handy double squares are indispensable for setting up machinery and for performing a host of shop layout tasks.
- They are manufactured in accordance with EEC Class 1 accuracy standards and are guaranteed to be square to within 0.002 (two thousandths of an inch) over the length of each blade.
- They have hardened and tempered no-glare satin chrome stainless steel blades. Blade marking are precision photo etched and then black filled for easy readability. Blades have quick Reading 4R markings (1/64ths and 1/32nds on one side and 1/8ths and 1/16ths on the reverse.
- Square heads are cast and then precision machined. Square head color is cobalt blue. Square heads lock down tight via locking knob.
- Squares come in a cardboard box.
- See more on Amazon...
Brand: Benchmark Tools | Manufacturer: Taylor Toolworks
Dimensions: 0.50 x 6.00 x 2.65 Inches
See On Amazon Similar To Benchmark Tools 388169 6 inch
#1
Benchmark Tools 106610 6 Rigid Woodworking Ruler Satin Chrome Finish 1/8th and 1/16th Grads Hardened Stainless Steel
Asin: B0BH76ZBQ4
Rule Is Finished With A Satin Chrome Finish That Minimizes Scratches And Corrosion And Increases Readability By Achieving A Brighter, Non-Glare Finish That Enhances The Contrast Between The Black Graduation Lines And The Surface Of The Rule..
Each Rule Comes In Vinyl Storage Pouch. These Are Well Made Rules And Will Provide Years Of Reliable Service In Any Shop..
Specifications: 6” Long X 3/4” Wide X 0.040” Thick.
Our Rules Are Made From Japanese Rust-Resistant Stainless Steel That Has Been Tempered Creating A Ruler That Can Flex If Needed And Snap Back Straight. The Edges And Ends Have Been Ground Parallel, Straight, Smooth And Square. Graduations Are Produced Via A Photoengraving Process Creating Very Consistent And Accurate Markings With Uniform Line Widths. Once Etched, Graduations Are Black Filled For Maximal Readability. Graduations Are Etched And Not Printed So Will Not Wear Off With Prolonged Use. Graduations Conform To Strict International Eec 1 Accuracy Standards, I.E. +/- 0.2Mm At 20° C For 1000Mm Ruler. Markings Feature Quick-Reading 1/8Ths And 1/16Ths On Both Sides.
Features
- Every woodworker should own a few precision machinist rulers as they will improve the accuracy of his/her work. Traditionally, the most common graduation markings used by woodworkers are 4R, or 1/8ths and 1/16ths on one side and 1/32nds and 1/64ths on the reverse. The fact is most woodworkers never use the finer 1/32nd and 1/64th markings as they are hard to read, too precise for most tasks, and just plain confusing, e.g., just what does 51/64th or 19/32nds really mean? So, we had rulers made under our Benchmark Tools brand that included the most commonly used 1/8th and 1/16th graduation marks on both sides
- Our rules are made from Japanese rust-resistant stainless steel that has been tempered creating a ruler that can flex if needed and snap back straight. The edges and ends have been ground parallel, straight, smooth and square. Graduations are produced via a photoengraving process creating very consistent and accurate markings with uniform line widths. Once etched, graduations are black filled for maximal readability. Graduations are etched and not printed so will not wear off with prolonged use. Graduations conform to strict international EEC 1 Accuracy Standards, i.e. +/- 0.2mm at 20 C for 1000mm ruler. Markings feature quick-reading 1/8ths and 1/16ths on both sides
- Rule is finished with a satin chrome finish that minimizes scratches and corrosion and increases readability by achieving a brighter, non-glare finish that enhances the contrast between the black graduation lines and the surface of the rule.
- Specifications: 6 long x 3/4 wide x 0.040 thick
- Each rule comes in vinyl storage pouch. These are well made rules and will provide years of reliable service in any shop.
- See more on Amazon...
Brand: Benchmark Tools | Manufacturer: Taylor Toolworks
Dimensions: 0.04 x 6.00 x 0.75 inches
See On Amazon #2
Benchmark Tools 106609 6 Rigid Woodworking Ruler Black Chrome Finish 1/8th and 1/16th Grads Hardened Stainless Steel
Asin: B0BH7CMWP3
Rule Is Finished With A Black Chrome Finish That Provides Scratch And Corrosion Resistance And Maximizes Readability By Achieving A Zero-Glare, High-Contrast, Ez Read Finish That Enhances Readability In Both Low And Bright Light Conditions..
Each Rule Comes In Vinyl Storage Pouch. These Are Well Made Rules And Will Provide Years Of Reliable Service In Any Shop..
Specifications: 6” Long X 3/4” Wide X 0.040” Thick.
Our Rules Are Made From Japanese Rust-Resistant Stainless Steel That Has Been Tempered Creating A Ruler That Can Flex If Needed And Snap Back Straight. The Edges And Ends Have Been Ground Parallel, Straight, Smooth And Square. Graduations Are Produced Via A Photoengraving Process Creating Very Consistent And Accurate Markings With Uniform Line Widths. Once Etched, Graduations Are White Filled For Maximal Readability. Graduations Are Etched And Not Printed So Will Not Wear Off With Prolonged Use. Graduations Conform To Strict International Eec 1 Accuracy Standards, I.E. +/- 0.2Mm At 20° C For 1000Mm Ruler. Markings Feature Quick-Reading 1/8Ths And 1/16Ths On Both Sides.
Features
- Every woodworker should own a few precision machinist rulers as they will improve the accuracy of his/her work. Traditionally, the most common graduation markings used by woodworkers are 4R, or 1/8ths and 1/16ths on one side and 1/32nds and 1/64ths on the reverse. The fact is most woodworkers never use the finer 1/32nd and 1/64th markings as they are hard to read, too precise for most tasks, and just plain confusing, e.g., just what does 51/64th or 19/32nds really mean? So, we had rulers made under our Benchmark Tools brand that included the most commonly used 1/8th and 1/16th graduation marks on both sides
- Our rules are made from Japanese rust-resistant stainless steel that has been tempered creating a ruler that can flex if needed and snap back straight. The edges and ends have been ground parallel, straight, smooth and square. Graduations are produced via a photoengraving process creating very consistent and accurate markings with uniform line widths. Once etched, graduations are white filled for maximal readability. Graduations are etched and not printed so will not wear off with prolonged use. Graduations conform to strict international EEC 1 Accuracy Standards, i.e. +/- 0.2mm at 20 C for 1000mm ruler. Markings feature quick-reading 1/8ths and 1/16ths on both sides
- Rule is finished with a black chrome finish that provides scratch and corrosion resistance and maximizes readability by achieving a zero-glare, high-contrast, EZ read finish that enhances readability in both low and bright light conditions.
- Specifications: 6 long x 3/4 wide x 0.040 thick
- Each rule comes in vinyl storage pouch. These are well made rules and will provide years of reliable service in any shop.
- See more on Amazon...
Brand: Benchmark Tools | Manufacturer: Taylor Toolworks
Dimensions: 0.04 x 6.00 x 0.75 inches
See On Amazon #3
Benchmark Tools 466538 Rigid English/Metric 300 mm / 12 Inch Machinist Rule with MM.5 MM, 1/32 and 1/64 Markings Stainless Steel Black Chrome Finish Conforms to EEC-1 Accuracy Standards (1)
Asin: B07Z5BH531 | Model: 466538 | PartNumber: 466538 | Ean: 0700667466538 | UPC: 700667466538
Brand: Benchmark Tools | Manufacturer: Taylor Toolworks
See On Amazon #4
Benchmark Tools 466705 Rigid 4R 12 Inch Rigid 4R Machinist Rule with 1/8, 1/16, 1/32 and 1/64 Markings Tempered Stainless Steel Zero-Glare Black Chrome Finish Conforms to EEC-1 Accuracy Standards (1)
Asin: B07Z58R46J | Model: 466705 | PartNumber: 466705 | Ean: 0700667466705 | UPC: 700667466705
Brand: Benchmark Tools | Manufacturer: Taylor Toolworks
See On Amazon #5
Benchmark Tools 106611 6 Flexible Woodworking Ruler Black Chrome Finish 1/8th and 1/16th Grads Hardened Stainless Steel
Asin: B0BH7SK3SV | Ean: 0796029774229 | UPC: 796029774229
Rule Is Finished With A Black Chrome Finish That Provides Scratch And Corrosion Resistance And Maximizes Readability By Achieving A Zero-Glare, High-Contrast, Ez Read Finish That Enhances Readability In Both Low And Bright Light Conditions..
Each Rule Comes In Vinyl Storage Pouch. These Are Well Made Rules And Will Provide Years Of Reliable Service In Any Shop..
Specifications: 6” Long X 1/2” Wide X 0.020” Thick.
Our Rules Are Made From Japanese Rust-Resistant Stainless Steel That Has Been Tempered Creating A Ruler That Can Flex If Needed And Snap Back Straight. The Edges And Ends Have Been Ground Parallel, Straight, Smooth And Square. Graduations Are Produced Via A Photoengraving Process Creating Very Consistent And Accurate Markings With Uniform Line Widths. Once Etched, Graduations Are White Filled For Maximal Readability. Graduations Are Etched And Not Printed So Will Not Wear Off With Prolonged Use. Graduations Conform To Strict International Eec 1 Accuracy Standards, I.E. +/- 0.2Mm At 20° C For 1000Mm Ruler. Markings Feature Quick-Reading 1/8Ths And 1/16Ths On Both Sides.
Features
- Every woodworker should own a few precision machinist rulers as they will improve the accuracy of his/her work. Traditionally, the most common graduation markings used by woodworkers are 4R, or 1/8ths and 1/16ths on one side and 1/32nds and 1/64ths on the reverse. The fact is most woodworkers never use the finer 1/32nd and 1/64th markings as they are hard to read, too precise for most tasks, and just plain confusing, e.g., just what does 51/64th or 19/32nds really mean? So, we had rulers made under our Benchmark Tools brand that included the most commonly used 1/8th and 1/16th graduation marks on both sides
- Our rules are made from Japanese rust-resistant stainless steel that has been tempered creating a ruler that can flex if needed and snap back straight. The edges and ends have been ground parallel, straight, smooth and square. Graduations are produced via a photoengraving process creating very consistent and accurate markings with uniform line widths. Once etched, graduations are white filled for maximal readability. Graduations are etched and not printed so will not wear off with prolonged use. Graduations conform to strict international EEC 1 Accuracy Standards, i.e. +/- 0.2mm at 20 C for 1000mm ruler. Markings feature quick-reading 1/8ths and 1/16ths on both sides
- Rule is finished with a black chrome finish that provides scratch and corrosion resistance and maximizes readability by achieving a zero-glare, high-contrast, EZ read finish that enhances readability in both low and bright light conditions.
- Specifications: 6 long x 1/2 wide x 0.020 thick
- Each rule comes in vinyl storage pouch. These are well made rules and will provide years of reliable service in any shop.
- See more on Amazon...
Brand: Benchmark Tools | Manufacturer: Taylor Toolworks
Dimensions: 0.04 x 6.00 x 0.75 inches
See On Amazon
Looking For Something Else?
Search