FYSETC Ender 5 Plus Build Plate Spring Steel 377x370mm/14.84x14.56in Double-Sided Textured PEI Surface and Sticker Bottom with Adhesive Removable PEI Sheet Flex Steel Platform-Gold
Asin: B09P8KD4B2
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Made Of High Quality Steel Plate, Flexible, Removable, High Strength And Heat Resistance. Strong Sticker Base With Adhesive, So You Can Heat Your Bed To High Temps For Specialty Filaments And Not Worry About Loss Of Performance..
Easy To Install. Remove The Back Adhesive At Sticker Base And Stick It On Your Hot Bed, Then Align The Steel Plate To The Base. Easily Handle Temperatures Up To 130°C. Works Great With Pla, Tpu, Petg, Abs, As Well As Many Other Filaments. If You Need More Adhesion For Tough-To-Stick Filaments Like Nylon, Feel Free To Use Glue Sticks, They Will Wash Off With Water After Use. If Can't Get A Perfect First Layer, Please Have A Try To Low Down The Printing Speed..
No More Prying Prints With A Scraper. Just Remove The Spring Steel Plate When Finished Printing, Flex The Part Off, And Snap The Plate Back Onto The Included Sticker! Never Scratch, Gouge, Or Damage Your Print Or Build Plate Ever Again!.
Size:377X370mm/14.84X14.56In, Compatible With Ender 5 Plus Or Other Similarly Build Plate. Please Re-Measure Your Hot Bed Before Ordering, Not Rely On The Build Volume/Printing Size!.
Features
- Special designed for Ender 5 Plus, Excellent double-sided PEI powder textured spring steel build plate, leaves a textured matte finish on your parts. Both sides can be used, which is more cost-effective. The kit includes one flexible steel plate and a soft sticker base.
- Size:377x370mm/14.84x14.56in, compatible with Ender 5 plus or other similarly build plate. Please re-measure your hot bed before ordering, not rely on the build volume/printing size!
- Made of high quality steel plate, Flexible, removable, high strength and heat resistance. Strong sticker Base with adhesive, so you can heat your bed to high temps for specialty filaments and not worry about loss of performance.
- No more prying prints with a scraper. Just remove the spring steel plate when finished printing, flex the part off, and snap the plate back onto the included Sticker! Never scratch, gouge, or damage your print or build plate ever again!
- Easy to install. Remove the back adhesive at sticker base and stick it on your hot bed, then align the steel plate to the base. Easily handle temperatures up to 130 C. Works great with PLA, TPU, PETG, ABS, as well as many other filaments. If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use glue sticks, they will wash off with water after use. If can't get a perfect first layer, please have a try to low down the printing speed.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon Similar To FYSETC Ender 5 Plus Build
#1
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing
Asin: B07WNQP916 | Model: ENO-Ender3-Hotend-Bluetube | PartNumber: ENO-Ender3-Hotend-Bluetube | Ean: 0705300791497, 0198549003108 | UPC: 705300791497, 198549003108
Hotend Replacement Parts Suitable For Ender 3, Ender-3X, Ender-3 Pro, Ender 3 V2 3D Printer..
Creality-Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
High Lubricity Additives Make Our Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills. Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Creality-Capricorn Original Teflon Tube 40Cm..
Features
- It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
- Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #2
Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover 3, 0.4mm Ender 3 Nozzle 3 and 2 Pair Pneumatic Couplers
Asin: B082PGCF2B | Model: ENDER3-PT | PartNumber: ENDER3-PT
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V40w..
With More Terminal Housing And Pins As Spare Parts, In Case Fail Installation And Waste..
Original Capricorn Xs Serious Bowden Ptfe Tubing With Lowest Friction On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Features
- It's 100% Creality Original Upgrade Assembled Extruder Hotend.
- Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- With more terminal housing and pins as spare parts, in case fail installation and waste.
- MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Weight: 0.30 pounds
See On Amazon #3
Creality Ender 3 Auto Bed Leveling Kit, Official CR Touch for Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5/CR-10 with 32 Bit V4.2.2/V4.2.7 Mainboard, 3D Printer Leveler Sensor Tool Kit Silicone Mounts
Asin: B0BXGCHZDL
More Professional Design: Compared With The Old Bl Touch, The New Cr Touch Uses A Combination Of Optical And Metal Probes, Which Increases The Service Life And Reduces Errors Caused By Magnetic Fields And Temperatures. 3D Automatic Bed Leveling Is Compatible With Pei, Stickers, Glass, Metal Platform. The Number Of Detections Has Reached A Revolutionary 100,000 Times, And The Positioning Accuracy Is ≤0.04Mm..
Package Includes: 1*Cr Touch, 3*Mounting Brackets, 4*Silicone Column Solid Mounts, 1*1.4M Power Cord, 3*Tie Straps, 4*Screws. Download The Firmware From The Official Website Of Creality And Copy It To The Blank Sd Card, Insert It Into The Card Slot Of The 3D Printer, Turn On The Power, And The Printer Will Read And Install The Firmware..
Strong Compatibility: Cr Touch Is An Automatic Leveler Specially Designed For Ender 3/ Ender 3 Neo/ Ender 3S/ Ender 3 S1/Ender 3 S1 Plus/Ender 3 S1 Pro/Ender 3 Pro/ Ender 3 Max/Ender 3 Max Neo/Ender 3 V2/Ender 3 V2 Neo/Ender 5 /Ender 5S/ Ender 5 S1/ Ender 5Pro/Cr-10 Models, Only Applicable To 32-Bit V4.2.2 And V4.2.7 Motherboards. The Included 3 Brackets Can Be Easily Installed On The Above Models..
Automatic Leveling: Cr Touch Conducts Multi-Point Detection On The Printing Platform, Records The Distance Of Each Point, And Constructs A Virtual Plane. Carry Out Distance Compensation Calculation When Printing, And Automatically Adjust The Nozzle Distance. Matched With The Silicone Leveling Column, It Can Be Leveled For A Long Time After One Leveling. Multiple Use Only Needs To Be Checked With Cr Touch..
Features
- After-sales Service: In order to let more 3D printing enthusiasts enjoy the comfort of CR Touch, we wholeheartedly provide you with 24-hour online after-sales service. Regardless of the various problems you encounter during the installation and use of CR Touch, please contact us in time, and our professional technical team will provide you with detailed solutions.
- Automatic Leveling: CR Touch conducts multi-point detection on the printing platform, records the distance of each point, and constructs a virtual plane. Carry out distance compensation calculation when printing, and automatically adjust the nozzle distance. Matched with the silicone leveling column, it can be leveled for a long time after one leveling. Multiple use only needs to be checked with CR Touch.
- More Professional Design: Compared with the old BL Touch, the new CR Touch uses a combination of optical and metal probes, which increases the service life and reduces errors caused by magnetic fields and temperatures. 3D automatic bed leveling is compatible with PEI, Stickers, Glass, Metal platform. The number of detections has reached a revolutionary 100,000 times, and the positioning accuracy is 0.04mm.
- Strong Compatibility: CR Touch is an automatic leveler specially designed for Ender 3/ Ender 3 Neo/ Ender 3S/ Ender 3 S1/Ender 3 S1 Plus/Ender 3 S1 Pro/Ender 3 Pro/ Ender 3 Max/Ender 3 Max Neo/Ender 3 V2/Ender 3 V2 Neo/Ender 5 /Ender 5S/ Ender 5 S1/ Ender 5Pro/CR-10 models, Only applicable to 32-bit V4.2.2 and V4.2.7 motherboards. The included 3 brackets can be easily installed on the above models.
- Package Includes: 1*CR Touch, 3*Mounting Brackets, 4*Silicone Column Solid Mounts, 1*1.4m Power Cord, 3*Tie Straps, 4*Screws. Download the firmware from the official website of Creality and copy it to the blank SD card, insert it into the card slot of the 3D printer, turn on the power, and the printer will read and install the firmware.
- See more on Amazon...
Brand: Mefine | Manufacturer: Mefine
See On Amazon #4
Ender 3 Hotend, Authentic Creality Assembled Hotend Kit 3D Printer Parts with 5X 0.4mm Nozzles for Ender 3 Ender 3 V2 and Ender 3 Pro
Asin: B082XXRT78 | Model: Sprinkler Kit -01 | PartNumber: Sprinkler Kit -01 | Ean: 8711459631234
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V 40W. Tip Of The Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon)..
Silicone Cover Is Provided To Help Keep Temperatures On The Hotend Much More Stable And This Will Result In Higher Print Quality And Consistency..
Five 0.4Mm Brass Nozzle Are Included In This Hotend Kit. This Kit Can Work With Different Sizes Of Mk8 Nozzle: 0.2Mm/0.3Mm/0.4Mm/0.5Mm /0.6Mm/0.8Mm/1.0Mm..
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Features
- Compatibility: 100% Creality Original. This assembled hotend kit from Creality is a plug and play replacement for Ender 3/ Ender 3 V2 /Ender 3 Pro/ Ender 3S.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- MK8 extruder hot end kit, white wire was temperature thermistor, braided wire was heating tube 24V 40W. Tip of the nozzle, aluminum heating block, throat pipe (built-in teflon).
- Five 0.4mm brass nozzle are included in this hotend kit. This kit can work with different sizes of MK8 nozzle: 0.2mm/0.3mm/0.4mm/0.5mm /0.6mm/0.8mm/1.0mm.
- Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
- See more on Amazon...
Brand: ORTHLAND | Manufacturer: Orthland
See On Amazon #5
Creality 3D Official Printer Ender 3 Dual Z-axis Upgrade Kit with Lead Screw, Metal Power Supply Holder and Stepper Motor, 3D Printer Ugrades Kit for Ender 3, Ender 3 Pro, Ender 3 V2
Asin: B09N8QQDSP | Model: CREALITYENDER3DUALZ | PartNumber: CREALITYENDER3DUALZ
【Smooth Running】 Upgrade Single Z-Axis Structure To A Dual Z-Axis Structure, Will Make The Printer More Easy To Leveling, Both Ends Of The X Axis Are Raised And Lowered Synchronously, Which Reduces Difficulty And Frequency Of Bed Leveling Obviously..
【After Sales Service】Creality 3D Pay Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【High Comparable】The Dual Z Axis Upgrade Kit Is Compatible With Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D Printer. Easily Improve 3D Printers With Low Cost Efficiency To Dual Z Axis Mode..
【Stable Performance】 Compared With Closed Timing Belt, This 3D Printer Parts Set Still Retains The Design Of Stepper Motor To Ensure Screw Rod Smooth Operation..
Features
- Increased Accuracy Compared with original structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves stability of 3D printing and increases the printing performance of 3D printer.
- Stable Performance Compared with Closed Timing Belt, this 3D printer parts set still retains the design of stepper motor to ensure screw rod smooth operation.
- Smooth Running Upgrade Single Z-axis structure to a dual Z-axis structure, will make the printer more easy to Leveling, both ends of the X axis are raised and lowered synchronously, which reduces difficulty and frequency of bed leveling obviously.
- High Comparable The dual z axis upgrade kit is compatible with Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D printer. Easily improve 3D printers with low cost efficiency to Dual Z axis mode.
- After Sales Service Creality 3D pay great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 3.94 x 15.55 inches | Weight: 2.01 pounds
See On Amazon #6
Creality Official Ender 3 S1 Pro Original Build Plate 235x235mm Magnetic Bed Plate Texture Removable PEI Sheet for Ender 3 V3 SE/Ender 3 V3 KE/Ender 3 S1/Ender 3/Ender 5 S1/Ender 5 Pro, K1, CR-10 SE
Asin: B0C4P1SP6F
【Wide Compatibility】- This Magnetic Build Plate Is Applicable To Most Materials Such As Pla, Abs, Asa, Petg, Tpu, Pc, Pa, Etc. It Is Compatible With Creality K1, Ender 3 V3 Se, Ender 3 V3 Ke, Ender 3 S1, Ender 3 S1 Pro, Ender 3, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 S1, Cr-10 Se And So On..
【Professional Support】- To Ensure Your Pleasant Shopping Experience, Creality Has A Professional Customer Service Team To Solve Your Problems. If You Have Any Problems, Please Do Not Hesitate To Contact Us. We Will Provide Friendly And Fast Customer Service To Solve Your Problem Within 24 Hours..
【Easy Model Removal】- Without Using Other Tools, You Can Easy To Remove The Printed Model By Just Bending The Pei Steel Plate Multiple Times After Printing. The Pei Sheet Has Excellent Elasticity And It Is Not Deformed After Repeated Bending..
【Precise Positioning】- Dual Handles And Positioning Hole Design Make The 3D Printer Build Plate Easier To Install And Use. Furthermore, This Ender 3 S1 Build Plate Has A Strong Magnetic Force, And It Is Not Easy To Dislocate After Installation. Strong Magnetic Stickers Help It Maintain High Adhesion At High Temperatures, Which Ensures Better Print Stability..
Features
- Premium PEI Materials - With heat and wear-resistant, frosted PEI powder coating, the PEI build plate surface is not easy to get scratched or damaged. This Ender 3 S1 Pro bed plate has high adhesion to prevent the model from warping while printing, whether at high or low temperatures.
- Precise Positioning - Dual handles and positioning hole design make the 3D printer build plate easier to install and use. Furthermore, this Ender 3 S1 build plate has a strong magnetic force, and it is not easy to dislocate after installation. Strong magnetic stickers help it maintain high adhesion at high temperatures, which ensures better print stability.
- Wide Compatibility - This magnetic build plate is applicable to most materials such as PLA, ABS, ASA, PETG, TPU, PC, PA, etc. It is compatible with Creality K1, Ender 3 V3 SE, Ender 3 V3 KE, Ender 3 S1, Ender 3 S1 Pro, Ender 3, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 S1, CR-10 SE and so on.
- Easy Model Removal - Without using other tools, You can easy to remove the printed model by just bending the PEI steel plate multiple times after printing. The PEI sheet has excellent elasticity and it is not deformed after repeated bending.
- Professional Support - To ensure your pleasant shopping experience, Creality has a professional customer service team to solve your problems. If you have any problems, please do not hesitate to contact us. We will provide friendly and fast customer service to solve your problem within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #7
Redrex Dual Gear Ender 3 Extruder with Two Washers Metal Drive Feeder Upgrade Kit Compatible with Creality Ender 3 V2 Pro,Ender 3 Neo Series,CR10 3D Printer TPU Filament Supported(Motor Shaft>21.5mm)
Asin: B09H6T3NNT | Model: RDX3D032 | PartNumber: RDX3D032
【Spring Adjustable Extruder】The Extrusion Spring Tension Could Be Adjusted By Tighten The Screw,Which Greatly Improves The Printing Accuracy And Feeding Issue..
【Kindly Reminder】:Please Calibrate The E-Steps From 100 To 139; Please Lubricate The Gears Before First Use;For 3D Printers With Filament Detector,As The Height Of Our Dual Gear Extruder May Be Different From The Original One, Please Print The Model To Rise Up The Filament Detector To Make Them At The Same Height;For Vyper Users,Please Swap The Motor Wire Sequence To Make It Turn Forward Instead Of Reverse.
【Application】:This All Metal Dual Drive Extruder Is Compatible With Ender 3 V2,Ender 3 Pro,Ender 3,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5 Pro,Cr10 S Series 3D Printer.Only Suit For 3D Printers With Motor Shaft Over 20Mm,Please Measure The Shaft Length Before Placing The Order..
【Upgraded Idler Gear Design】This Idler Gear Is Upgraded With Two Washers On Both Sides, So The Sharp Gear Will Not Ride Against The Bottom Of The Arm Or Chew It Up..
Features
- Double Gear Extrusion Mechanism :The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in the tube, nozzle or hotend.
- Upgraded Idler Gear Design This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the arm or chew it up.
- Spring Adjustable Extruder The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and feeding issue.
- Application :This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5 Pro,CR10 S series 3D printer.ONLY suit for 3d printers with motor shaft over 20mm,please measure the shaft length before placing the order.
- Kindly Reminder :Please calibrate the E-steps from 100 to 139; Please lubricate the gears before first use;for 3d printers with filament detector,as the height of our dual gear extruder may be different from the original one, please print the model to rise up the filament detector to make them at the same height;for Vyper users,please swap the motor wire sequence to make it turn forward instead of reverse
- See more on Amazon...
Brand: REDREX | Manufacturer: Redrex
Dimensions: 1.96 x 0.98 x 2.20 inches | Weight: 0.13 pounds
See On Amazon #8
Official Creality Ender 3 Dual Z-axis Upgrade Kit with Lead Screw, Stepper Motor and Metal Power Supply Holder, Ender 3 pro upgrades for Ender 3/ Ender 3 Pro/Ender 3 V2
Asin: B07VJG4ZCG
Dustproof And Mute Design - Elaborate Craft, Good Sealing Performance, Good Dust-Proof Smooth Sliding, And Maximum Mute In High-Speed Operation..
After-Sales Service - If You Have Any Unsolvable Problems During Installation And Use The Ender 3 Pro Dual Z-Axis Upgrade Kit, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Smooth Running - Upgrading The Single Z-Axis Structure To A Dual Z-Axis Structure Will Make The Printer Easier To Leveling, Both Ends Of The X-Axis Are Raised And Lowered Synchronously, Which Reduces The Difficulty And Frequency Of Bed Leveling Obviously..
Excellent Performance - With An Upgraded Structure, The Ender 3 Dual Z-Axis Upgrade Kit Reduces The Layer Ripple Caused By Z-Axis Vibration, Avoiding Backlog Of Filament Thoroughly, Which Improves The Stability And Increases The Printing Performance Of The 3D Printers. The Ender 3 Pro Upgrade Is Compatible With Ender 3/ Ender 3 Pro/ Ender 3 V2 3D Printer..
Features
- Precise and Smooth Screw - Well made motor is efficient and reliable with high speed and low noise. The guide rail precision is P3-P7. The repeated positioning accuracy reaches 0.01mm. High loading ability and high running speed meet the high-speed running requirement.
- Excellent Performance - With an upgraded structure, the ender 3 dual z-axis upgrade kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves the stability and increases the printing performance of the 3D printers. The ender 3 pro upgrade is compatible with Ender 3/ Ender 3 Pro/ Ender 3 V2 3D printer.
- Dustproof and Mute Design - Elaborate craft, good sealing performance, good dust-proof smooth sliding, and maximum mute in high-speed operation.
- Smooth Running - Upgrading the Single Z-axis structure to a dual Z-axis structure will make the printer easier to Leveling, both ends of the X-axis are raised and lowered synchronously, which reduces the difficulty and frequency of bed leveling obviously.
- After-Sales Service - If you have any unsolvable problems during installation and use the ender 3 pro dual z-axis upgrade kit, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #9
Official Creality Metal Leveling Nuts with 20mm Die Springs and 0.4mm Nozzles, Red Hand Twist Nuts Set for Ender 3/3 Pro/3 V2/3 Max, Ender 5/5 Plus/ 5 Pro, CR 10 Series 3D Printer Bed
Asin: B09VGWHF3Y
【Easy To Use】It's Very Easy To Use, You Just Only To Take Off The Old One And Put On Our Nuts And Springs. The Torque Of These Nuts Is Large, Making It Easier To Fine Tune The Hot Bed..
【After Sales Service】Creality Pays Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【Package List】4 Pcs Aluminum Level Nuts (60Mm) , 4 Pcs Yellow Die Spring (8*20Mm), 5 Pcs 0.4Mm Nozzles.
【Highly Compatible】Upgraded Aluminum Hand Twist Level Nut Are Original Upgraded Replacement Part For Ender 3/3 Pro/3 V2/3 Max, Ender 5/5 Plus/ 5 Pro, Cr-10, Cr-10 V2, Cr-10 V3,Cr-10 Max, Cr 10, Cr-10 Mini, Cr-10S, Cr 10S Pro,Cr 10S Pro V2, Cr-10 Plus, Cr-X, Cr 20..
Features
- Quality Assurance Those Twist Nuts are all original and high quality from 100% quality assurance. Made by high quality aluminum, last much longer your stock plastic nuts.
- Highly Compatible Upgraded aluminum hand twist level nut are original upgraded replacement part for Ender 3/3 Pro/3 V2/3 Max, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 V3,CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR 10S Pro V2, CR-10 Plus, CR-X, CR 20.
- Easy to use It's very easy to use, you just only to take off the old one and put on our nuts and springs. The torque of these nuts is large, making it easier to fine tune the hot bed.
- Package List 4 Pcs aluminum level nuts (60mm) , 4 Pcs yellow die spring (8*20mm), 5 Pcs 0.4mm Nozzles
- After Sales Service Creality pays great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 0.39 x 0.39 x 0.39 inches | Weight: 1.00 Kilograms
See On Amazon #10
Official Creality Ender 3 Direct Drive Extruder Kit, Comes with 42-40 Stepper Motor Hotend Kit, Support Flexible TPU Filament, BL Touch, Compatible with Ender 3 Pro/Ender 3 V2
Asin: B08J7N2LNL | Model: US4-ENDER3JINDUANJICHU-FBA | PartNumber: US4-ENDER3JINDUANJICHU-FBA
Direct Extruding Smooth Feed-In - Lower Torque Requirements On The Stepper Motor, Reducing The Possibility Of The Nozzle Blockage When Retracting Filament And Malfunction When Loading New Filament. There Is More Even Feed-In With Direct Extruding Than Bowden Tube Extruding..
Printing At High - Temperature, Strong Compatibility: Compatible With More Types Of Filament Like Pla Filament, Petg Filament And Tpu Filemnt. When Printing Flexible Tpu Under High Temperature, It Can Optimize Tpu Printing Performance..
Integrated All Metal Hotend - It's Sturdy And Wear-Resistant With An All-Metal Shell And Surface Oxidation Treatment; An Integrated Structure Is Convenient For Wiring And Replacing..
Easy To Install And Use - Switch Bowden Extrusion To Direct Extruder At Any Time And Easy To Disassembly. It Doesn't Affect The Inherent Function Of The Printer Because It's A Complete Extrusion Kit. With Longer Extruder Motor Connecting Cable, Tools, Accessories, And Wiring Diagram Instruction For Installation, Easy To Assemble..
Features
- Compatibility with - Creality Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer.
- Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble.
- Direct Extruding Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament. there is more even feed-in with direct extruding than Bowden tube extruding.
- Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment; an Integrated structure is convenient for wiring and replacing.
- Printing at High - Temperature, Strong Compatibility: Compatible with more types of filament like PLA filament, PETG filament and TPU filemnt. When printing flexible TPU under high temperature, it can optimize TPU printing performance.
- See more on Amazon...
Brand: Wolias | Manufacturer: Creality 3D
Weight: 0.80 pounds
See On Amazon
Looking For Something Else?
Search