uxcell 18 Tooth Flat Chain Sprocket A Type, 1/2" Pitch, 12mm Bore A3 Carbon Steel for ISO 08B Chains, Blank
Asin: B09R9RR8XS | Model: a21122300ux0858 | PartNumber: a21122300ux0858
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Chain Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Chain Sprockets Have At Least Three Teeth In Mesh With The Chain..
Notice: This Product Is A Blank Piece And Cannot Be Used Directly. The Inner Hole Needs Further Processing To Be Fixed..
The Product Is Made Of A3 Carbon Steel. High-Frequency Quenching Treatment Of Teeth, The Surface Hardness, Wear Resistance Are Significantly Improved. The Part Without Quenching Retains The Original Toughness And Is Easy To Further Process. It Can Be Processed Into Different Inner Diameter Sizes According To The Requirements Of Use..
Chain Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft. This Type A Chain Sprocket Has No Hub Extension Either Side. Suitable For Short Shaft Fixing..
Features
- Specifications: Hardness: 58-60HRC; Number of Teeth: 18; Outside Diameter: 77mm / 3.03-inch; Total Width: 7mm / 0.28-inch; Bore Diameter: 12mm / 0.47-inch; Pitch: 1/2-inch / 12.7mm; Tooth Width: 7mm / 0.28-inch; 1 x Chain Sprocket
- Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.
- The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
- The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.
- Notice: This product is a blank piece and cannot be used directly. The inner hole needs further processing to be fixed.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 18 Tooth Flat Chain
#1
uxcell Chain Idler Sprocket, 10mm Bore 3/8" Pitch 18 Tooth Tensioner, Black Oxide Finish C45 Carbon Steel with Insert Single Bearing for ISO 06B Chains
Asin: B09PDSHDLY | Model: a21120100ux0236 | PartNumber: a21120100ux0236
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With A Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 18; Bearing Model: 6300Z; Outside Diameter: 58mm / 2.28-inch; Bump Width: 6mm / 0.24-inch; Total Width: 17mm / 0.67-inch; Bore Diameter: 10mm / 0.39-inch; Pitch: 3/8-inch / 9.525mm; Tooth Width: 5mm / 0.2-inch; 1 x Idler Sprocket
- Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell Chain Idler Sprocket, 17mm Bore 1/2" Pitch 18 Tooth Tensioner, Black Oxide Finish C45 Carbon Steel with Insert Single Bearing for ISO 08B Chains
Asin: B09SCSK3DT
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With A Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 18; Bearing Model: 6203Z; Outside Diameter: 78mm / 3.07-inch; Bump Width: 6mm / 0.24-inch; Total Width: 19mm / 0.75-inch; Bore Diameter: 17mm / 0.67-inch; Pitch: 1/2-inch / 12.7mm; Tooth Width: 7.3mm / 0.29-inch; 1 x Idler Sprocket
- Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell Chain Idler Sprocket, 20mm Bore 1/2" Pitch 18 Tooth Tensioner, Black Oxide Finish C45 Carbon Steel with Insert Double Bearing for ISO 08B Chains
Asin: B09SCVSJMY | Model: a21121800ux0528 | PartNumber: a21121800ux0528
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With Double Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 18; Bearing Model: 6004Z; Outside Diameter: 78mm / 3.07-inch; Bump Width: 12mm / 0.47-inch; Total Width: 31mm / 1.22-inch; Bore Diameter: 20mm / 0.79-inch; Pitch: 1/2-inch / 12.7mm; Tooth Width: 7.3mm / 0.29-inch; 1 x Idler Sprocket
- Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon
Looking For Something Else?
Search