BIGTREETECH SKR Mini E3 V3.0 32Bit Silent Control Board for Ender 3, Ender 3 V2.0,Ender3 Pro, Ender 3 S1 3D Printer with TMC2209 UART Stepper Driver,Support Marlin/Klipper,Compatible with BL Touch
Asin: B09S9LL7XW
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【✅Upgraded Miniusb Interface】The Pc Communication Usb Interface Is Upgraded From Mini Usb To Micro Usb B, Which Is More Adaptable..
【❤️Serious Service】We Will Provide A Long-Term Warranty Service Of Up To 12Months,Strict Testing For All Components Before Delivery. If You Encounter Any Problems When Printing, Please Feel Free To Contact Us, Please Give Us A Chance To Solve The Problem For You..
【✅Multiple Functioning】Support Bltouch, Rgb Lights,Filament Detection, Power-Off Resume, Automatic Shutdown, Etc .Compatible With Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro/Cr-10 3D Printers.
【✅Improved Cooling Effect】Upgraded Heat Sink Improves Heat Dissipation,Trengthen The Drive Heat Dissipation Capacity;Thermistor Inputs Are Protected From Short Circuit To Vin;Added A Third Pwm Controlled Cooling Fan Output,It Can Better Protect The Circuit Board And Prolong The Life Of The Motherboard..
Features
- Main control chip upgrade SKR MINI E3 V3.0 main control chip upgrade Adopts STMicroelectronics G0 series MCU STM32G0B1RET6,the instructions will be sent to the 3D printer faster and more accurately.
- Improved cooling effect Upgraded heat sink improves heat dissipation,trengthen the drive heat dissipation capacity;Thermistor inputs are protected from short circuit to Vin;Added a third PWM controlled cooling fan output,It can better protect the circuit board and prolong the life of the motherboard.
- Upgraded MiniUSB interface The PC communication USB interface is upgraded from Mini USB to Micro USB B, which is more adaptable.
- Multiple functioning Support BLtouch, RGB lights,filament detection, power-off resume, automatic shutdown, etc .Compatible with Creality Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/Ender 5 pro/CR-10 3D printers
- Serious service We will provide a long-term warranty service of up to 12months,Strict testing for all components before delivery. If you encounter any problems when printing, please feel free to contact us, please give us a chance to solve the problem for you.
- See more on Amazon...
Brand: Ickiya | Manufacturer: BIGTREETECH
Dimensions: 3.62 x 5.59 x 1.65 inches
See On Amazon Similar To BIGTREETECH SKR Mini E3 V3.0
#1
BIGTREETECH SKR Mini E3 V3.0 Control Board with TMC2209 UART Stepper Driver New Upgrade 32Bit 3D Printer Silent Board for Ender-3, Ender3 Pro, Ender-3 V2 3D Printer
Asin: B09LC34SCK | Model: KINGPRINTER-ZZB000590 | PartNumber: KINGPRINTER-ZZB000590 | Ean: 0778416923601 | UPC: 778416923601
【Heating Output】Support Heating Hot End And Hot Bed Output. The Heating Indicator Light Will Light Up When The Heating Hot End Or Hot Bed Is Correctly Connected And Powered On. Please Connect The Wires In A Power-Off State, Otherwise It May Cause Static Breakdown Of The Mosfet And Damage To The Control Board..
【Output Power Supply】Increase Spi Output Port +3.3V Power Supply, External Spi Sensor Power Supply Voltage +3.3V And +5V Are Optional, Support The Motherboard To Directly Supply Power To Peripherals..
【Heat Sink Upgrade】Redesign The Drive Heat Sink, Strengthen The Drive Heat Dissipation Capacity, And Greatly Improve The Heat Dissipation Performance; There Are 4 Tmc2209 Silent Drivers Onboard The Motherboard..
【Three Cnc Fan】Increase The Heat Dissipation Controllable Fan To Reduce The Printer Temperature When The Device Is Working; The Fan Port Needs To Ensure That The Fan Voltage Specifications Are Consistent With The Motherboard Power Supply, Otherwise The Fan Will Have No Voltage..
Features
- Main Control Chip Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6 or STM32G0B0RET6; Add thermistor interface protection circuit to prevent damage to the main control chip.
- Three CNC Fan Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working; The fan port needs to ensure that the fan voltage specifications are consistent with the motherboard power supply, otherwise the fan will have no voltage.
- Heating Output Support heating hot end and hot bed output. The heating indicator light will light up when the heating hot end or hot bed is correctly connected and powered on. Please connect the wires in a power-off state, otherwise it may cause static breakdown of the MOSFET and damage to the control board.
- Heat Sink Upgrade Redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly improve the heat dissipation performance; There are 4 tmc2209 silent drivers onboard the motherboard.
- Output Power Supply Increase SPI output port +3.3V power supply, external SPI sensor power supply voltage +3.3V and +5V are optional, support the motherboard to directly supply power to peripherals.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #2
BIGTREETECH SKR Mini E3 V3.0 Motherboard, Ender-3/Ender-3 Pro/Ender-3 V2 Motherboard Upgrade, BTT 32 Bit Silent Control Board with TMC2209 UART Stepper Motor Driver
Asin: B07YW86YS7 | Model: SKR MINI E3 V3.0 | PartNumber: SKR MINI E3 V3.0
🔥【Diy Friendly】Btt Skr Mini E3 V3.0 Motherboard Supports Bltouch, Rgb Lights, Blocking Detection And Shutdown Function. It Also Supports Tft35 E3 V3.0.1/Tft35 V3.0.1/Tft28 V3.0 Touch Screen As Well As Original 12864 Lcd Screen..
🔥【Firmware Update】Skr Mini E3 V3.0 Is Compatible Both With Marlin And Klipper Firmwares. Firstly Download Firmware On Github Website Of Skr Mini E3 V3.0 Motherboard, Copy And Save It To Sd Card (Note: Ensure Firmware Have Been Reserved ), Then Re-Plug The Sd Card And Wait For 10S. Note: Our Control Board Comes Without Sd Card..
🔥【Warranty】Biqu Offers A 12-Months Warranty For Our Skr Mini E3 V3 Motherboard. Please Feel Free To Contact Us If You Might Have Any Problem About Our Product, We Are Always Ready For Help..
🔥【Onboard Tmc2209 Drivers】Bigtretech Skr Mini E3 V3.0 Mainboard Is Integrated With Ultra Silent Tmc2209 Stepper Motor Driver. Tmc2209 Driver Generates Lower Heat And Has A Larger-Area Cooling Position To Lower The Working Temperature. Meanwhile, Tmc2209 Adopts Stealthchop2 Mute Technology To Ensures Noiseless Operation, Maximum Efficiency And Best Motor Torque..
🔥【Larger Heatsink And 3 Cnc Fans】Upgraded Skr Mini E3 V3.0 Has A Larger Aluminum Heat Sink Area For Stepper Motor Driver, Increasing Its Heat Dissipation Performance By 20%. And Skr Mini E3 V3 Also Has 3 Heat Dissipation Controllable Fans To Reduce The Heat Of Your 3D Printers When It's Working..
Features
- Born for Ender-3 Main control chip of BTT SKR Mini E3 V3.0 mainboard is STMicroelectronics' latest G0 series: STM32G0B1RET6 or STM32G0B0RET6. This 3D printer control board is compatible with Ender-3, Ender-3 V2, Ender-3 Pro, Ender-5 and Ender-5 pro.
- Larger Heatsink and 3 CNC Fans Upgraded SKR MINI E3 V3.0 has a larger aluminum heat sink area for stepper motor driver, increasing its heat dissipation performance by 20%. And SKR MINI E3 V3 also has 3 heat dissipation controllable fans to reduce the heat of your 3D printers when it's working.
- DIY Friendly BTT SKR Mini E3 V3.0 motherboard supports BLTouch, RGB lights, blocking detection and shutdown function. It also supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28 V3.0 touch screen as well as original 12864 LCD screen.
- Onboard TMC2209 Drivers BIGTRETECH SKR MINI E3 V3.0 mainboard is integrated with ultra silent TMC2209 stepper motor driver. TMC2209 driver generates lower heat and has a larger-area cooling position to lower the working temperature. Meanwhile, TMC2209 adopts stealthChop2 Mute technology to ensures noiseless operation, maximum efficiency and best motor torque.
- Firmware Update SKR Mini E3 V3.0 is compatible both with Marlin and Klipper firmwares. Firstly download firmware on GitHub website of SKR MINI E3 V3.0 motherboard, copy and save it to SD card (Note: ensure firmware have been reserved ), then re-plug the SD card and wait for 10s. Note: Our control board comes without SD card.
- Warranty BIQU offers a 12-months warranty for our SKR MINI E3 V3 motherboard. Please feel free to contact us if you might have any problem about our product, we are always ready for help.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #3
BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black
Asin: B09LH727MT | Model: ZZB000590 | PartNumber: ZZB000590 | Ean: 0778416923601 | UPC: 778416923601
⭐【Heat Sink Design Upgrade】Bigtreetech Skr Mini E3 V3.0 Motherboard New Upgraded To Integrated Large Stepping Motor Driver Aluminum Heat Sink,Strengthen The Drive Heat Dissipation Capacity, And Greatly Improve The Motherboardc Heat Dissipation Performance..
⭐【Fan Upgraded】Bigtreetech Skr Mini E3 V3.0 Motherboard Increase Three Cnc Heat Dissipation Controllable Fan Interface To Reduce The Printer Temperature When The Device Is Working..
⭐【100% Satisfying Customer Services 】Due To Amazon's Return Policy, There May Be Some Problems With The Packaging Of The Products You Receive, We Are Sorry For This Situation, Please Don't Worry, Feel Free To Contact Us, We Will Solve This Problem For You Properly!.
⭐【Multiple Functions】Btt Skr Mini E3 V3.0 Silent Board Supports Bltouch,Microprobe, Rgb Lights,Filament Detection, Automatic Shutdown,Power-Off Reesume, Display Supports Tft35 E3 V3.0.1/Tft35 V3.0.1/Tft28/Tft43/Tft50/Tft70 V3.0 Touch Screen As Well As Original 12864 Lcd Of Ender 3 Printer.When Running Klipper Touch Mode，Please Choose Btt Hdmi5 V1.1 Touchscreen.
⭐【Multiple Compatibile】Bigtreetech Skr Mini E3 V3.0 Control Board Integrated Ultra Silent Tmc2209 Uart Stepper Driver,Designed For Ender 3,Plug And Playing,Compatible With Ender 5/Ender 5 Pro/Ender 3 V2 3D Printer, The Firmware Is Pre-Install Well Before We Ship Out, You Can Select The Firmware Base On Your Needs..
Features
- Main Control Chip BIGTREETECH SKR Mini E3 V3.0 32 bit control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin.
- Multiple Compatibile BIGTREETECH SKR MINI E3 V3.0 control board integrated ultra silent TMC2209 uart stepper driver,designed for Ender 3,Plug and Playing,Compatible with Ender 5/Ender 5 Pro/Ender 3 V2 3D Printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs.
- Heat Sink Design Upgrade BIGTREETECH SKR MINI E3 V3.0 motherboard new upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance.
- Multiple Functions BTT SKR MINI E3 V3.0 silent board Supports BLTouch,MicroProbe, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer.when running Klipper touch mode Please choose BTT HDMI5 V1.1 touchscreen
- Fan Upgraded BIGTREETECH SKR Mini E3 V3.0 motherboard Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working.
- 100% Satisfying Customer Services Due to Amazon's return policy, there may be some problems with the packaging of the products you receive, we are sorry for this situation, please don't worry, feel free to contact us, we will solve this problem for you properly!
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.39 x 4.08 x 2.76 inches
See On Amazon #4
BIQU MicroProbe V2.0 Auto Bed Leveling Sensor kit,3D Printer Bed Leveling Sensor for Ender 3/Ender 3 V2/Ender 3 pro/Ender 3 Max/Voron /H2 Extruder Compatible SKR Mini E3 V3.0,Octopus,Manta,SKR 3
Asin: B0C89G7YH2 | Model: BIQU Microprobe V2.0 | PartNumber: BIQU Microprobe V2.0
✅【Durable And Long Lifespan】Microprobe V2.0 Bed Leveling Sensor Probe Uses Metal Probe, Makes Itself Wear-Resistant And Durable,Removable And Replaceable Probing Pin.With A Long Service Life Of Up To 10,000,000+ Probing Tests, Will Be A Perfect Upgrade For Your Printer.Compatible With Pei/Sticker/Glass/Metal Bed...
✅【Easy Installation】Btt Microprobe V2.0 Auto Bed Leveling Suitable For Ender 3/Ender 3 V2/,Ender 3 Max,Voron Afterburer/Steathlburner,Ratrig Vc3,Biqu B1/ Bx 3D Printer/H2 Series Extruder （The Bracket Stl Can Be Downloaded From Github) And All Fdm Corexy,I3 3D Printer..
❤️【Attentive Service】(Notes:Microprobe Works Differently From Bltouch/Cr Touch, The Firmware Must Be Re-Configured For Microprobe,For Firmware Update And Wiring Installation Tutorials, If You Have Any Problems During Use, Please Contact Us At The First Time. We Will Give You A Satisfactory Solution..
✅【Wide Application】Biqu Micro Probe Compatible With All Motherboards That Support Bltouch/Cr Touch,Such As Skr Mini E3 V3.0/Octopus V1.1/Octopus Pro/Skr V1.4 Turbo/ Manta M4p/M5p/M8p/Skr 3/Ez,Manta E3 Ez,Kraken..32 Bit V4.2.7,Mks Gen L Series,.(Skr Mini E3 V3.0 With Microprobe V2 For Ender 3 Firmware And Microprobe And Btt Motherboard Wiring Diagram And Klipper, Marlin, Rrf Firmware Configuration Instructions Have Been Uploaded To Github).
✅[Ultra Light And Small] Bigtreetech Microprobe V2.0 Is 25.3Mm Long And Weighs 6G, Which Is 37% Shorter And 40% Lighter Than 3D Touch, Bl Touch/Cr Touch Automatic Leveling Bed Sensors. It Adds Almost No Weight To The Extruder And Upgrade High-Precision Auto Leveling Capability..
Features
- High Precision BIQU MicroProbe V2.0 auto bed leveling sensor adopts electromagnetic components+photoelectric sensors chip,accuracy is 0.001mm Standard Deviation @24 C,0.003mm Standard Deviation @60 C,Compared to other auto bed leveling sensors, the accuracy is improved by 10 times.
- [Ultra Light and Small] BIGTREETECH Microprobe V2.0 is 25.3mm long and weighs 6g, which is 37% shorter and 40% lighter than 3D touch, BL touch/CR touch automatic leveling bed sensors. it adds almost no weight to the extruder and upgrade high-precision auto leveling capability.
- Durable and Long Lifespan Microprobe V2.0 bed leveling sensor probe uses metal probe, makes itself wear-resistant and durable,Removable and replaceable probing pin.with a long service life of up to 10,000,000+ Probing Tests, will be a perfect upgrade for your printer.compatible with PEI/Sticker/Glass/Metal bed..
- Wide Application biqu Micro probe compatible with all motherboards that support Bltouch/CR touch,such as SKR MINI E3 V3.0/Octopus V1.1/Octopus pro/SKR V1.4 turbo/ Manta M4P/M5P/M8P/SKR 3/EZ,Manta E3 EZ,Kraken..32 Bit V4.2.7,MKS Gen L Series,.(skr mini e3 v3.0 with Microprobe v2 for ender 3 firmware and Microprobe and BTT motherboard wiring diagram and Klipper, Marlin, RRF firmware configuration instructions have been uploaded to Github)
- Easy Installation BTT Microprobe V2.0 auto bed leveling suitable for Ender 3/Ender 3 V2/,Ender 3 Max,Voron Afterburer/SteathlBurner,RatRig VC3,BIQU B1/ BX 3D Printer/H2 series Extruder The bracket STL can be downloaded from Github) and all FDM CoreXY,I3 3D Printer.
- Attentive service (Notes:Microprobe works differently from BLtouch/CR touch, the firmware MUST be re-configured for Microprobe,For firmware update and wiring installation tutorials, If you have any problems during use, please contact us at the first time. We will give you a satisfactory solution.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 1.09 x 1.14 x 0.39 inches | Weight: 0.01 ounces
See On Amazon #5
BIGTREETECH BLTouch V3.1 Auto Bed Leveling Sensor Kit+Mount+1M Extension Cable for Ender 3,Ender 3 Pro,Ender 3S,Ender 5,Ender 5 Pro,Ender 5s CR10 3D Printer with SKR Mini E3 V3.0,Octopus/Manta Board
Asin: B087CQ3RLG | Model: 1 | PartNumber: 1 | Ean: 0779288068124 | UPC: 779288068124
🎅【Simple To Use】Thanks To Its Small And Simple Structure, Bl Touch Auto Leveling Kit Can Be Easily Applied. As Bltouch Works As Usual Auto Bed Leveling Sensor, Gathering Information & Setting Up Your Firmware Will Be An Easy Task. Can Be Used On Heating Beds Made Of Glass, Wood, Metal And Other Materials..
🎅【Wide Compatiblity】Bl Touch Auto Bed Leveling Sensor With The Bracket Is Suitable For Ender 3,Ender 3 Pro,Ender 3S,Ender 5,Ender 5 Pro,Ender 5S, Cr10 3D Printer,Compatible With Skr Mini E3 V3.0,Octopus V1.1/Octopus Pro/Max Ez/Skr V1.4 Turbo,Skr 3/Ez,Manta M8p/M4p/M5p,Manta E3ez,Kraken,Skr Pico,V4.2.7,Mks Gen L...3D Printer Motherboard..
🎅【What You Get】This Kit Consists Of Bltouch V3.1 Auto Leveling Sensor, Mount And 1 Meter Extension Cable, Which May Not Fit Ender 3 Pro Machine. If You Wanna Buy Extra Extension Cable,Please Check The Asin: B08g8b23l7(Copy And Paste On Search Bar)..
🎅【Smart To Use】Bl Touch Auto Bed Leveling Kit Featured With Self-Test, The Push Pin Is Operated Three Times To Test When The Power Is On. Bltouch V3.1 Also Added Other Smart Functions, Like Alarm, Alarm Release, Test Mode For M119, Which Enables User Convenience And Enjoyable Printing..
Features
- High precision ANTCLABS BLTouch V3.1 auto bed leveling sensor s standard deviation in repeatability is around 0.005mm, at that precise.
- Smart to Use bl touch auto bed leveling kit featured with self-test, The push pin is operated three times to test when the power is on. Bltouch V3.1 also added other smart functions, like alarm, alarm release, test mode for M119, which enables user convenience and enjoyable printing.
- Simple to Use Thanks to its small and simple structure, bl touch auto leveling kit can be easily applied. As BLTouch works as usual auto bed leveling sensor, gathering information & setting up your firmware will be an easy task. can be used on heating beds made of glass, wood, metal and other materials.
- What You Get This kit consists of BLTouch V3.1 auto leveling sensor, mount and 1 meter Extension cable, which may not fit ender 3 pro machine. if you wanna buy extra extension cable,please check the Asin: B08G8B23L7(copy and paste on search bar).
- Wide Compatiblity BL touch auto bed leveling sensor with the bracket is suitable for Ender 3,Ender 3 Pro,Ender 3S,Ender 5,Ender 5 Pro,Ender 5S, CR10 3D Printer,compatible with SKR MINI E3 V3.0,Octopus v1.1/Octopus pro/Max EZ/SKR V1.4 turbo,SKR 3/EZ,Manta M8p/M4p/M5P,Manta e3EZ,Kraken,SKR Pico,V4.2.7,MKS Gen L...3d printer motherboard.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: ANTCLABS
See On Amazon #6
BIGTREETECH Eddy V1.0 High Speed Auto Bed Leveling Sensor for Voron 2.4/Trident,VZbot,CoreXY,I3 Series Running Klipper 3D Printer Compatible with Octopus V1.1,Octopus Pro,SKR Mini E3 V3.0,Manta M8p
Asin: B0D14M62W3 | Model: BIGTREETECH Eddy V1.0 | PartNumber: BIGTREETECH Eddy V1.0
✅Perfect For Voron Stealthburner: Bigtreetech Eddy Current Bed Levelling Sensor Can Be Effortlessly Attached To The Voron 2.4&Trident Pl-08N/Tl-Q5mc2 Location For Quick And Convenient Integration, Suitable For Ender, Corexy, Voron, Vzbot, I3 Series 3D Printers..
💓After-Sales Service: Notes:The Spring Steel Sheet With A Magnetic Sticker Heatbed Solution Works Well With Eddy Series, Such As The Hot Bed Solution Of Pei Steel Plate+Soft Magnet.But It Is Essential To Avoid Interference From Standalone Magnets, Such As Used In Round Magnet Hotbed (Prusa),Regardless Of The Various Problems You Encounter During The Installation And Use Of Eddy, Please Contact Us In Time,Will Provide You With Detailed Solutions..
✅Error-Proof Installation: Bigtreetech Eddy Auto Bed Leveling Sensor With Custom Shell Effectively Shields External Metal Interference While Reserving Space For The Coil. It Is Easy To Install And Does Not Require Measurement, Which Improves The User Experience And Ensures Detection Accuracy..
✅Easier Installation: Btt Eddy High Speed Auto Leveling Sensor Comes With A 2.5M Usb Cable, Offering Plug-And-Play Convenience, Compatilbe With Btt Pi+ Octopus Pro/Octopus V1.1/Octopus Max Ez/Kraken/Skr Mini E3 V3.0/Skr V1.4 Turbo/Skr 3/Ez, Skr Pico Or Cb1/Cb2+ Manta M8p/M5p/M4p, Manta E3 Ez Running Klipper Control Board..
✅Temperature Compensation: Affected By Temperature Drift, Eddy V1.0 Auto Bed Leveling With The Temperature Compensation Function And Z-Axis Homing, Unaffected By Temperature Fluctuations. Integrates With Klipper's Temperature Compensation Feature To Boost Leveling Precision And Avoid Temperature Drift..
✅20 Sec High Speed Leveling: Btt Eddy V1.0 High Speed Leveling Sensor Adopts Rp2040 Main Control Chip, For 250*250Mm Hotbed Only 20 Sec, Weight Only 6G, Super Light&Small, Reduce The Impact Of Exercise, Precision Of 0.0005Mm, For Large Sizes Printer Friendly, Easily Achieve High-Precision Leveling..
Features
- Designed for Klipper: BIGTREETECH Eddy V1.0 high speed auto bed leveling sensor is designed for Klipper. adopts inductive leveling technology. uses a high-frequency magnetic field to induce eddy currents in a conductor, and completes precise leveling by measuring the intensity of the eddy currents.
- 20 sec High Speed Leveling: BTT Eddy V1.0 high speed leveling sensor adopts RP2040 main control chip, for 250*250MM hotbed only 20 sec, weight only 6g, Super light&Small, reduce the impact of exercise, precision of 0.0005mm, for large sizes printer friendly, easily achieve high-precision leveling.
- Perfect for Voron StealthBurner: BIGTREETECH Eddy current bed levelling sensor can be effortlessly attached to the Voron 2.4&Trident PL-08N/TL-Q5MC2 location for quick and convenient integration, suitable for Ender, CoreXY, Voron, Vzbot, I3 series 3D printers.
- Temperature Compensation: Affected by temperature drift, Eddy V1.0 auto bed leveling with the temperature compensation function and Z-Axis homing, unaffected by temperature fluctuations. Integrates with Klipper's temperature compensation feature to boost leveling precision and avoid temperature drift.
- Error-Proof Installation: BIGTREETECH Eddy auto bed leveling sensor with custom shell effectively shields external metal interference while reserving space for the coil. It is easy to install and does not require measurement, which improves the user experience and ensures detection accuracy.
- Easier installation: BTT Eddy high speed auto leveling sensor comes with a 2.5M USB cable, offering plug-and-play convenience, compatilbe with btt pi+ Octopus Pro/Octopus V1.1/Octopus Max EZ/Kraken/SKR Mini E3 V3.0/SKR V1.4 Turbo/SKR 3/EZ, SKR Pico or CB1/CB2+ Manta M8P/M5P/M4P, Manta E3 EZ running Klipper control board.
- After-sales Service: Notes:The spring steel sheet with a magnetic sticker heatbed solution works well with Eddy series, such as the hot bed solution of PEI steel plate+soft magnet.but it is essential to avoid interference from standalone magnets, such as used in round magnet hotbed (Prusa),regardless of the various problems you encounter during the installation and use of Eddy, please contact us in time,will provide you with detailed solutions.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Direct
See On Amazon #7
BIGTREETECH Smart Filament Runout Sensor V2.0 BTT SFS Filament Detector to Detect Filament Break/Run Out/Jam/Tying for 1.75mm Filament Use with SKR Mini E3 V3.0, SKR 3, Manta E3EZ, Octopus Pro
Asin: B0C7PZDBNC
🌞【Bilateral Feeding】Bigtreetech Smart Filament Sensor V2.0 Allows Bi-Directional Feeding, Which Removes You From Hard Discrimination Of Filament Inlet And Outlet. Such Upgrading Enables More Flexible Installation And Can Maximize Space Utilization Of Your 3D Printer! Sfs V2.0 Weighs Only 36G, Greatly Reducing Inertia Added To The Direct-Drive Extruder For Higher Printing Speed And Accuracy..
🌞【Wide Compatibility】Bigtreetech Filament Jam Sensor Can Be Mounted Both On Bowden Extruder And Direct Drive Extruders. It Supports Any Motherboard With Available I/O Ports(Endstop, Filament Detection, Bl Touch, Induction Sensor, Etc), Like Skr Mini E3 V3.0 / Skr3 / Skr 3 Ez / Skrat / Manta E3ez / Octopus Pro. And Sfs V2.0 Is Compatible With Klipper, Marlin And Reprap Firmwares..
🌞【Warm Customer Service】Please Feel Free To Contact Us Directly Through Amazon If You Have Any Problem When Using Our Sfs V2.0, Bigtreetech Customer Service Team Will Try Our Best To Solve It..
🌞【Easy To Install】Our Filament Run Out Sensor Is Designed With 3 Mounting Holes On The Back For Easy Installation Onto Your 3D Printer With Only A Bracket. The Bracket Stl File Can Be Downloaded In Btt Github Web: Bigtreetech/Smart-Filament-Detection-Module/Tree/Master. The Filament Feeding Lever Serves For Easy Flexible Filament Loading. Please Feel Free To Contact Us If You Have Any Doubts..
🌞【Sensitive Photoelectric Filament Detector】Btt Filament Detection Module Adopts Photoelectric Sensor Whose Theoretical Detection Length Can Reach Up To 2.88Mm, Much Shorter Than 7Mm Of Sfs V1.0. Such Improvement Enables Sfs V2.0 Longer Service Life And Higher Precision In Filament Abnormality Detection. Note: 2.88 Mm Is The Minimum Detection Length For The Sensor To Function Properly. If ‘False Triggers’ Error Occurs, Try To Increase The Detection Length By 1Mm Until The Problem Is Resolved..
Features
- Smart Filament Sensor BIGTREETECH SFS V2.0 can not only detect filament runout, but also filament breakage, filament clogging, filament tying and even extruder malfunction. Detecting above abnormal extrusion cases, BTT SFS V2.0 will send error alerts to screen and automatically stop printing to keep you away from filament and electricity waste.
- Sensitive Photoelectric Filament Detector BTT filament detection module adopts photoelectric sensor whose theoretical detection length can reach up to 2.88mm, much shorter than 7mm of SFS V1.0. Such improvement enables SFS V2.0 longer service life and higher precision in filament abnormality detection. Note: 2.88 mm is the minimum detection length for the sensor to function properly. If false triggers error occurs, try to increase the detection length by 1mm until the problem is resolved.
- Bilateral Feeding BIGTREETECH smart filament sensor V2.0 allows bi-directional feeding, which removes you from hard discrimination of filament inlet and outlet. Such upgrading enables more flexible installation and can maximize space utilization of your 3d printer! SFS V2.0 weighs only 36g, greatly reducing inertia added to the direct-drive extruder for higher printing speed and accuracy.
- Easy to Install Our filament run out sensor is designed with 3 mounting holes on the back for easy installation onto your 3d printer with only a bracket. The bracket stl file can be downloaded in BTT github web: bigtreetech/smart-filament-detection-module/tree/master. The filament feeding lever serves for easy flexible filament loading. Please feel free to contact us if you have any doubts.
- Wide Compatibility BIGTREETECH filament jam sensor can be mounted both on bowden extruder and direct drive extruders. It supports any motherboard with available I/O ports(Endstop, filament detection, BL touch, induction sensor, etc), like SKR MINI E3 V3.0 / SKR3 / SKR 3 EZ / SKrat / Manta E3EZ / Octopus Pro. And SFS V2.0 is compatible with Klipper, Marlin and RepRap firmwares.
- Warm Customer Service Please feel free to contact us directly through Amazon if you have any problem when using our SFS V2.0, BIGTREETECH customer service team will try our best to solve it.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
Weight: 0.08 Pounds
See On Amazon #8
BIGTREETECH Mini12864 V2.0 LCD Graphic Smart Display Control Board with Adapter and Cable for Ender-3 VORON 2.4 Prusa-i3 3D Printer RAMPS 1.4 RepRap 3D Printer Mendel Prusa Arduino
Asin: B08P5LXR86 | Model: KINGPRINT-ZZB000475 | PartNumber: KINGPRINT-ZZB000475 | Ean: 0791568743491 | UPC: 791568743491
3.Product Comes Encoder Parameter Adjustment Can Be Achieved, And The File Selection Print..
5.Do Not Worry About The Problem Of After-Sales, If There Is Any Need, Get In Touch With Us, We Will Help You Solve It..
4.Plug And Play On The Ramps, But Need To Modify The Firmware To Support..
2.With A Sd Card Base On Back, Put Slicing File Into The Sd Card And Select The File On The Lcd, Then Can Be Printing..
Features
- 1.The Mini12864 display panel has RGB multi-color backlight and can support 8 RGB, which is even more cool.
- 2.With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing.
- 3.Product comes encoder parameter adjustment can be achieved, and the file selection print.
- 4.Plug and play on the RAMPS, but need to modify the firmware to support.
- 5.Do not worry about the problem of after-sales, if there is any need, get in touch with us, we will help you solve it.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 1.18 x 2.36 x 1.18 inches | Weight: 0.11 Pounds
See On Amazon #9
BIGTREETECH DIRECT SKR Mini E3 V2.0 Control Board 32Bit Silent Motherboard Integrated with TMC2209 UART Stepper Motor Driver for Upgraded Ender 3 Ender 3 Pro 3D Printer Control Board
Asin: B089CQ3DHB | Model: ZZB000412 | PartNumber: ZZB000412
🌈【Support Various Functions】Btt Skr Mini E3 V2.0 Control Board Supports Various Function Extensions, Such As, Bltouch, Filament Detection, Resumption Of Shutdown, Shutdown After Shutdown, Etc ..
🌈【Satisfying Customer Services】If You Need Any Information For Skr Mini E3 V2.0, You Could Contact Us On Amazon, And We'll Get Back To You Within 24 Hours..
🌈【Notes】 Pay Attention To Correct Wiring, Avoid Motherboard Contact With Metal Objects, And Take Electrostatic Protection Measures..
🌈【 4 Layers For Board】Bigtreetech Direct Skr Mini E3 V2.0 Increased To 4 Layers On The Control Board's Back, So As To Improve On Heat Dissipation Signal Function And Anti-Interference..
🌈【Better Thermal Dissipation】The Hot-Bed Mos Tube Uses Wsk220n04, Low On-Resistance, Which Reduces Heat Generation. Enlarged Heat Dissipation Area Protects Driving Chip And Components From Problems Caused By Heat Sink..
Features
- Silent Control Board BIGTREETECH DIRECT SKR MINI E3 V2.0 adopts ARM Cortex-M3 series STM32F103RCT6 main control chip with 32-bit CPU 72MHz, integrated with TMC2209 to enhance its stability. It's a super easy drop in replacement for Ender 3 printer.plug and playing.
- Better Thermal Dissipation The hot-bed MOS tube uses WSK220N04, low on-resistance, which reduces heat generation. Enlarged heat dissipation area protects driving chip and components from problems caused by heat sink.
- Support Various Functions BTT SKR MINI E3 V2.0 control board supports various function extensions, such as, BLtouch, filament detection, resumption of shutdown, shutdown after shutdown, etc .
- 4 Layers for Board BIGTREETECH DIRECT SKR MINI E3 V2.0 increased to 4 layers on the control board's back, so as to improve on heat dissipation signal function and anti-interference.
- Satisfying Customer Services If you need any information for SKR MINI E3 V2.0, you could contact us on Amazon, and we'll get back to you within 24 hours.
- Notes Pay attention to correct wiring, avoid motherboard contact with metal objects, and take electrostatic protection measures.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH Origianl
Dimensions: 0.39 x 4.00 x 2.80 inches
See On Amazon #10
BIGTREETECH Pi V1.2 Control board 64bit Quad Core 1GB DDR3L 40-pin GPIO Compatible with SKR MINI E3 V3.0 Octopus/SKR V1.4 turbo to run Klipper/Linux/Debain For I3/CoreXY 3D Printer
Asin: B0C46B6X64 | Model: PI V1.2 | PartNumber: PI V1.2
【Support Display And Motherboard】Btt Pi V1.2 Core Board Display Adopts Malig32 Mp2 Gpu,Support Opengl3.2 And Hdmi2.0A Uhd 4K Video & Audio Output And Spi Screen（Btt Hdmi5/7,Tft35 Spi) ,Onboard 4Xusb2.0 Port.Powerful High Performance Details And Clarity. Motherboard Suppport Skr Mini E3 V3.0 ,Skr Pico ,Skr V1.4 Turbo,Skr 3,Kraken,Octopus Pro/Octopus V1.1 Series.Then Running Klipper Firmware..
【Flexible Power】Support Usb-C 5V Power Supply And Dc12v-24V From A 3D Printer,Making It Easy And Efficient To Power Up The Board Without Any Extra Adapters Or Power Soucres..
【Rich Connectivity】Onboard Standard 40-Pingpio Header,3.5Mm Audio Jack，Tf Card Slot，Adxl345 Spi,Usb To Can Module(Need To Purchase Can Adapter V1.0 Module),Built-In Ir Receiver.Rj45 Port Support A 100Mbps Wired Network .Built-In 2.4G Wifi Module ,Supports 100Mbps Wireless Network, Users Can Connect The Inlculde Wifi Antenna To Get A Stronger And More Stable Wifi Signa..
【About Size】Btt Pi V1.2 Control Board Size Is 85*56Mm,The Same As The Raspberry-Pi 3B/4B, Making It A Seamless Fit For Your Existing Projects..
Features
- Main control chip bigtreetech btt pi v1.2 board adopts ALLWINNER H616,64-bit Quad-core, Cortex-A53@1.5GHz Processor ,RAM is 1GB DDR3L SDRAM.
- About Size BTT PI V1.2 Control Board size is 85*56mm,the same as the Raspberry-Pi 3B/4B, Making it a seamless fit for your existing projects.
- Support Display and Motherboard btt pi v1.2 core board display Adopts MaliG32 MP2 GPU,Support OpenGL3.2 and HDMI2.0A UHD 4K Video & Audio output and SPI screen BTT HDMI5/7,TFT35 SPI) ,onboard 4xUSB2.0 port.Powerful High Performance details and clarity. motherboard suppport SKR MINI E3 V3.0 ,SKR Pico ,SKR V1.4 turbo,SKR 3,Kraken,Octopus pro/Octopus V1.1 series.then running Klipper firmware.
- Rich Connectivity Onboard Standard 40-pinGPIO header,3.5mm Audio Jack TF card Slot ADXL345 SPI,USB To CAN Module(need to purchase CAN Adapter V1.0 module),Built-in IR Receiver.RJ45 port support a 100Mbps wired network .built-in 2.4G Wifi module ,supports 100Mbps wireless network, Users can connect the inlculde wifi antenna to get a stronger and more stable Wifi signa.
- Flexible power Support USB-C 5V power supply and DC12V-24V from a 3D Printer,making it easy and efficient to power up the board without any extra adapters or power soucres.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.39 x 3.30 x 2.20 inches
See On Amazon
Looking For Something Else?
Search