Morris 15377 Water-Tight Service Entrance Connector, Zinc Die Cast, 2/0 Cable Size, 1-1/2" Size, 2-Pack
Asin: B09SSX4CMJ | Model: 15377 | PartNumber: 15377
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Used To Connect Service Entrance Cable To A Service Enclosure In Wet Locations.
U/Flat Style Conductor Only.
Accepts 2 Insulated Conductors, 1 Bare.
Compression Type Seu Connector.
Features
- Water-Tight Service Entrance Connectors - Zinc Die Cast - Water-Tight Service Entrance Connectors - Used To connect Service Entrance Cable to a Service Enclosure in wet loations.
- Compression Type SEU Connector
- Used to Connect Service Entrance Cable to a Service Enclosure in Wet Locations
- Accepts 2 Insulated Conductors, 1 Bare
- U/Flat Style Conductor Only
- See more on Amazon...
Brand: Morris | Manufacturer: Morris Products
Dimensions: 0.00 x 0.00 x 0.00 Inches
See On Amazon Similar To Morris 15377 WaterTight Service Entrance
#1
Morris 15534 Service Entrance Head, Conduit Mount Threaded, Aluminum, 1-1/2", 1-Pack
Asin: B00VNVUY56 | Model: 15534 | PartNumber: 15534 | Ean: 0601986155342 | UPC: 601986155342
Assembled With Electrical Grade Phenolic Insulator With Multiple Holes.
Suitable For Outdoor Use - Weather Resistant.
Die Cast Aluminum.
Conduit Mount Head Used With Rigid Or Imc For Pulling Service Entrance Conductors.
Features
- Aluminum Service Entrance Caps - Conduit Mount Threaded - Aluminum Service Entrance Caps Conduit Mount Threaded used with Rigid conduit or IMC for pulling service drop conductors.
- Conduit Mount Head used with Rigid or IMC for Pulling Service Entrance Conductors
- Assembled with electrical grade phenolic insulator with multiple holes
- Die Cast Aluminum
- Suitable for Outdoor use - Weather resistant
- See more on Amazon...
Brand: Morris | Manufacturer: Morris Products
Dimensions: 12.00 x 4.00 x 6.00 Inches
See On Amazon #2
Morris 90673 Morris Products 90673 Insulated Service Entrance Compression Splice, 2-25/32" Splice Type, Compression Connector Type, 1/0-6 Wire Range Blue/Yellow
Asin: B00UKGE0NM | Model: 90673 | PartNumber: 90673 | Ean: 0601986906739 | UPC: 601986906739
High Conductivity Insulated Service Entrance Splice Meets Or Exceed Class A-3 Requirements Of Ansi C119.4, When Properly Installed On Aluminum To Aluminum Or Aluminum To Copper Conductors.
High Conductivity Splice Is Coated With Oxide Inhibiting Compound.
High Conductivity Aluminum Service Entrance Splices Have Solid Center Barriers And Large Chamfers To Ease Cable Insertion.
For Standard Conductors.
Features
- Service Entrance Insulated Splices 2-25/32" Length 5/8" Die - Our High Conductivity Insulated Service Entrance Splice is perfect for Electrical Service Installations
- For Standard Conductors
- High Conductivity Insulated Service Entrance Splice meets or exceed Class A-3 requirements of ANSI C119.4, when properly installed on Aluminum to Aluminum or Aluminum to Copper Conductors
- High Conductivity Aluminum Service Entrance Splices have Solid Center Barriers and Large Chamfers to ease cable insertion
- High Conductivity Splice is coated with Oxide Inhibiting compound
- See more on Amazon...
Brand: Morris | Manufacturer: Morris Products
Dimensions: 12.00 x 4.00 x 6.00 Inches
See On Amazon #3
Morris 15370 Water-Tight Service Entrance Connector, Zinc Die Cast, 8 Cable Size, 1" Size
Asin: B00VNTQTI4 | Model: 15370 | PartNumber: 15370 | Ean: 0601986153706 | UPC: 601986153706
Used To Connect Service Entrance Cable To A Service Enclosure In Wet Locations.
U/Flat Style Conductor Only.
Accepts 2 Insulated Conductors, 1 Bare.
Compression Type Seu Connector.
Features
- Water-Tight Service Entrance Connectors - Zinc Die Cast - Water-Tight Service Entrance Connectors - Used To connect Service Entrance Cable to a Service Enclosure in wet loations.
- Compression Type SEU Connector
- Used to Connect Service Entrance Cable to a Service Enclosure in Wet Locations
- Accepts 2 Insulated Conductors, 1 Bare
- U/Flat Style Conductor Only
- See more on Amazon...
Brand: Morris | Manufacturer: Morris Products
See On Amazon #4
Morris 15501 Service Entrance Cable Hood, Non-Metallic, (3)2/0 to 4/0 Cable Size
Asin: B00VNTRHTE | Model: 15501 | PartNumber: 15501 | Ean: 0601986155014 | UPC: 601986155014
Non-Metallic Pvc Construction.
Suitable For Outdoor Use.
Provides Protection To Service Entrance Cables.
Features
- Non-Metallic Service Entrance Cable Hoods - Non-Metallic Service Entrance Cable Hoods Provides Protection to Service Entrance Cables.
- Provides Protection to Service Entrance Cables
- Non-Metallic PVC construction
- Suitable for Outdoor use
- See more on Amazon...
Brand: Morris | Manufacturer: Morris Products
Weight: 0.27 pounds
See On Amazon #5
Morris 15533 Service Entrance Head, Conduit Mount Threaded, Aluminum, 1-1/4"
Asin: B00VNVUY4C | Model: 15533 | PartNumber: 15533 | Ean: 0601986155335 | UPC: 601986155335
Assembled With Electrical Grade Phenolic Insulator With Multiple Holes.
Suitable For Outdoor Use - Weather Resistant.
Die Cast Aluminum.
Conduit Mount Head Used With Rigid Or Imc For Pulling Service Entrance Conductors.
Features
- Aluminum Service Entrance Caps - Conduit Mount Threaded - Aluminum Service Entrance Caps Conduit Mount Threaded used with Rigid conduit or IMC for pulling service drop conductors.
- Conduit Mount Head used with Rigid or IMC for Pulling Service Entrance Conductors
- Assembled with electrical grade phenolic insulator with multiple holes
- Die Cast Aluminum
- Suitable for Outdoor use - Weather resistant
- See more on Amazon...
Brand: Morris | Manufacturer: Morris Products
See On Amazon #6
Morris 15531 Service Entrance Head, Conduit Mount Threaded, Aluminum, 3/4"
Asin: B00VNVUUDM | Model: 15531 | PartNumber: 15531 | Ean: 0601986155311 | UPC: 601986155311
Assembled With Electrical Grade Phenolic Insulator With Multiple Holes.
Suitable For Outdoor Use - Weather Resistant.
Die Cast Aluminum.
Conduit Mount Head Used With Rigid Or Imc For Pulling Service Entrance Conductors.
Features
- Aluminum Service Entrance Caps - Conduit Mount Threaded - Aluminum Service Entrance Caps Conduit Mount Threaded used with Rigid conduit or IMC for pulling service drop conductors.
- Conduit Mount Head used with Rigid or IMC for Pulling Service Entrance Conductors
- Assembled with electrical grade phenolic insulator with multiple holes
- Die Cast Aluminum
- Suitable for Outdoor use - Weather resistant
- See more on Amazon...
Brand: Morris | Manufacturer: Morris Products
Dimensions: 12.00 x 4.00 x 6.00 Inches | Weight: 0.20 pounds
See On Amazon #7
Morris 15532 Service Entrance Head, Conduit Mount Threaded, Aluminum, 1-inch Trade Size
Asin: B00VNVUUWI | Model: 15532 | PartNumber: 15532 | Ean: 0601986155328 | UPC: 601986155328
Suitable For Outdoor Use - Weather Resistant.
(1 Piece).
Die Cast Aluminum.
Features
- Assembled with electrical grade phenolic insulator with multiple holes
- Die Cast Aluminum
- Suitable for Outdoor use - Weather resistant
- (1 Piece)
- See more on Amazon...
Brand: Morris | Manufacturer: Morris Products
Weight: 0.24 pounds
See On Amazon #8
Morris 91238 Insulated Service Entrance Compression 5-1/2" 840 Die Splice Type with 4/0-1/0 Wire Range, 1-Pack
Asin: B00UKGFVPI | Model: 91238 | PartNumber: 91238 | Ean: 0601986912389 | UPC: 601986912389
Our Highly Conductive Splice Meets Or Exceed Class A-3 Requirements Of Ansi C119.4, When Properly Installed On Aluminum To Aluminum Or Aluminum To Copper Conductor.
Highly Conductive Service Entrance Splice Is Coated With Oxide Inhibitor Compound.
High Conductivity Aluminum Splices Have Solid Center Barriers And Large Chamfers To Ease Cable Insertion.
For Heavy-Duty Overhead Services.
Features
- Insulated Service Entrance Splices 5-1/2" 840 Die - These High Conductivity Insulated Service Entrance Splices are perfect for Electrical Service Installations
- For Heavy-Duty Overhead Services
- Our highly conductive Splice meets or exceed Class A-3 requirements of ANSI C119.4, when properly installed on Aluminum to Aluminum or Aluminum to Copper Conductor
- High Conductivity Aluminum Splices have Solid Center Barriers and Large Chamfers to ease cable insertion
- Highly conductive Service Entrance Splice is coated with Oxide Inhibitor Compound
- See more on Amazon...
First Available: 03/12/2017
Brand: Morris | Manufacturer: Morris Products
Dimensions: 12.00 x 4.00 x 6.00 Inches | Weight: 0.02 pounds
See On Amazon #9
Morris 15537 Service Entrance Head, Conduit Mount Threaded, Aluminum, 3"
Asin: B00VNVUZOQ | Model: 15537 | PartNumber: 15537 | Ean: 0601986155373 | UPC: 601986155373
Assembled With Electrical Grade Phenolic Insulator With Multiple Holes.
Suitable For Outdoor Use - Weather Resistant.
Die Cast Aluminum.
Conduit Mount Head Used With Rigid Or Imc For Pulling Service Entrance Conductors.
Features
- Aluminum Service Entrance Caps - Conduit Mount Threaded - Aluminum Service Entrance Caps Conduit Mount Threaded used with Rigid conduit or IMC for pulling service drop conductors.
- Conduit Mount Head used with Rigid or IMC for Pulling Service Entrance Conductors
- Assembled with electrical grade phenolic insulator with multiple holes
- Die Cast Aluminum
- Suitable for Outdoor use - Weather resistant
- See more on Amazon...
Brand: Morris | Manufacturer: Morris Products
See On Amazon #10
Morris 97326 Clear Insulated Multi-Cable Connector - Single Entry 2 Port 2-14, 2-Pack
Asin: B09TD1V22Y | Model: 97326 | PartNumber: 97326
Clear Insulation Allows Visual Confirmation That Conductor Is Properly Inserted.
Single Piece Clear Molded Insulation With Rugged High-Dielectric Plastisol Dipped Coating Is Chemical And Abrasion Resistant.
Multi-Port 6061-T6 Aluminum Connector - Cu9al Dual Rated For Use With Copper And/Or Aluminum Wire.
Clear Insulated Electrical Power Connectors Clear Multi-Cable Connector - Single Side Entry Features Include:.
Features
- Clear Multi-Cable Insulated Electrical Power Connectors Single Entry 3 Port 4-14 - With our Clear Multi Conductor Insulated Connector, you'll see your termination is right every time
- Clear Insulated Electrical Power Connectors Clear Multi-Cable Connector - Single Side Entry features include:
- Clear Insulation allows Visual Confirmation that conductor is properly inserted
- Multi-Port 6061-T6 Aluminum Connector - CU9AL Dual Rated for use with Copper and/or Aluminum wire
- Single Piece Clear Molded Insulation with Rugged High-Dielectric Plastisol Dipped Coating is chemical and abrasion resistant
- See more on Amazon...
Brand: Morris Products | Manufacturer: Morris Products
Dimensions: 2.75 x 6.63 x 3.38 Inches
See On Amazon #11
3 Pack of 4 - Brand Morris Products Black Insulated in-Line Splice Connector Pre-Filled, Easy Entry, Rubber Vinyl Coating - 2-14 Wire Range, Slotted Allen Hex 3.46 L x 0.82 W x 1.62 H
Asin: B094BZSHDQ | Ean: 0313548416821 | UPC: 313548416821
Easy Re-Entry: These Dual-Entry Insulated In-Line Splice Connectors Offer Easy Re-Entry For Inspection, Troubleshooting, Changes And Low-Cost Installations..
Pre-Filled: Morris Products’ Black Insulated In-Line Splice Connectors Are Pre-Filled With Oxide Inhibitor And Offer A Temperature Range Of -49 To 194 Degrees F. The 600-Volt Cable Conductor Is 6061-T6 Aluminum Cu9al Dual Rated For Use With Copper And Aluminum Wires..
Heavy Duty Insulation: Each Black Insulated In-Line Splice Connector For Various Wire Ranges Is Insulated With Rugged, High-Dielectric Rubber And Vinyl Coating For Long-Term Use..
Features
- 3 Pack of 4: Includes 12 pieces of Morris Products item # 97017, in the manufactures original master pack.
- HEAVY DUTY INSULATION: Each black insulated in-line splice connector for various wire ranges is insulated with rugged, high-dielectric rubber and vinyl coating for long-term use.
- EASY RE-ENTRY: These dual-entry insulated in-line splice connectors offer easy re-entry for inspection, troubleshooting, changes and low-cost installations.
- PRE-FILLED: Morris Products black insulated in-line splice connectors are pre-filled with oxide inhibitor and offer a temperature range of -49 to 194 degrees F. The 600-volt cable conductor is 6061-T6 Aluminum CU9AL dual rated for use with copper and aluminum wires.
- See more on Amazon...
Brand: Morris Products | Manufacturer: Morris Products
See On Amazon #12
Morris Products Aluminum Service Entrance Cap Clamp On Caps For Pulling Service Drop Conductors, Rigid Conduit, IMC, E.M.T. Heavy Duty Pressure Clamp Weather Resistant 2-1/2
Asin: B00VNVUUHI | Model: 15526 | PartNumber: 15526 | Ean: 0601986155267 | UPC: 601986155267
Durable Construction: Each Aluminum Service Entrance Cap Is Crafted From Cast Aluminum And Includes A Heavy-Duty Pressure Bar Type Clamp In Body, Suitable For Outdoor Use..
Collection Of Comprehensive Electrical Tools: Morris Products Is Proud To Feature A Variety Of Electrical Tools And Applications That Range From Wire Connectors And Non-Insulated Ferrule To Nylon Cable Ties And Cable Splicers..
Size Variations: Choose The Aluminum Service Entrance Cap That Is Best Suited For Electrical Applications With Sizing Options That Include ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 2 ½”, 3”, 3 ½” And 4”..
Heavy-Duty Assembly: Know That You’Re Getting High Quality When Opting For This Aluminum Service Entrance Cap That Is Assembled With Electrical Grade Phenolic Insulators With Multiple Holes..
Features
- PULL SERVICE DROP CONDUCTORS: This aluminum service entrance cap from Morris Products feature a clamp-on type head that is used with rigid conduit, IMC or E.M.T. to pull service drop conductors with ease.
- HEAVY-DUTY ASSEMBLY: Know that you re getting high quality when opting for this aluminum service entrance cap that is assembled with electrical grade phenolic insulators with multiple holes.
- DURABLE CONSTRUCTION: Each aluminum service entrance cap is crafted from cast aluminum and includes a heavy-duty pressure bar type clamp in body, suitable for outdoor use.
- SIZE VARIATIONS: Choose the aluminum service entrance cap that is best suited for electrical applications with sizing options that include , , 1 , 1 , 1 , 2 , 2 , 3 , 3 and 4 .
- COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers.
- See more on Amazon...
Brand: Morris | Manufacturer: Morris Products
See On Amazon #13
Morris 15530 Service Entrance Head, Conduit Mount Threaded, Aluminum, 1/2", 1-Pack
Asin: B00VNVUUCS | Model: 15530 | PartNumber: 15530 | Ean: 0601986155304 | UPC: 601986155304
Assembled With Electrical Grade Phenolic Insulator With Multiple Holes.
Suitable For Outdoor Use - Weather Resistant.
Die Cast Aluminum.
Conduit Mount Head Used With Rigid Or Imc For Pulling Service Entrance Conductors.
Features
- Aluminum Service Entrance Caps - Conduit Mount Threaded - Aluminum Service Entrance Caps Conduit Mount Threaded used with Rigid conduit or IMC for pulling service drop conductors.
- Conduit Mount Head used with Rigid or IMC for Pulling Service Entrance Conductors
- Assembled with electrical grade phenolic insulator with multiple holes
- Die Cast Aluminum
- Suitable for Outdoor use - Weather resistant
- See more on Amazon...
Brand: Morris | Manufacturer: Morris Products
Dimensions: 12.00 x 4.00 x 6.00 Inches | Weight: 0.02 Pounds
See On Amazon #14
Morris 91237 Insulated Service Entrance Compression 5-1/2" 840 Die Splice Type with 4/0- Number 1 Wire Range, 1-Pack
Asin: B00UKGG0GM | Model: 91237 | PartNumber: 91237 | Ean: 0601986912372 | UPC: 601986912372
Our Highly Conductive Splice Meets Or Exceed Class A-3 Requirements Of Ansi C119.4, When Properly Installed On Aluminum To Aluminum Or Aluminum To Copper Conductor.
Highly Conductive Service Entrance Splice Is Coated With Oxide Inhibitor Compound.
High Conductivity Aluminum Splices Have Solid Center Barriers And Large Chamfers To Ease Cable Insertion.
For Heavy-Duty Overhead Services.
Features
- Insulated Service Entrance Splices 5-1/2" 840 Die - These High Conductivity Insulated Service Entrance Splices are perfect for Electrical Service Installations
- For Heavy-Duty Overhead Services
- Our highly conductive Splice meets or exceed Class A-3 requirements of ANSI C119.4, when properly installed on Aluminum to Aluminum or Aluminum to Copper Conductor
- High Conductivity Aluminum Splices have Solid Center Barriers and Large Chamfers to ease cable insertion
- Highly conductive Service Entrance Splice is coated with Oxide Inhibitor Compound
- See more on Amazon...
Brand: Morris | Manufacturer: Morris Products
Dimensions: 12.00 x 4.00 x 6.00 Inches | Weight: 0.15 pounds
See On Amazon #15
Morris 91238 Insulated Service Entrance Compression 5-1/2" 840 Die Splice Type with 4/0-1/0 Wire Range, 2-Pack
Asin: B09RPXFWFD | Model: 91238 | PartNumber: 91238
Our Highly Conductive Splice Meets Or Exceed Class A-3 Requirements Of Ansi C119.4, When Properly Installed On Aluminum To Aluminum Or Aluminum To Copper Conductor.
Highly Conductive Service Entrance Splice Is Coated With Oxide Inhibitor Compound.
High Conductivity Aluminum Splices Have Solid Center Barriers And Large Chamfers To Ease Cable Insertion.
For Heavy-Duty Overhead Services.
Features
- Insulated Service Entrance Splices 5-1/2" 840 Die - These High Conductivity Insulated Service Entrance Splices are perfect for Electrical Service Installations
- For Heavy-Duty Overhead Services
- Our highly conductive Splice meets or exceed Class A-3 requirements of ANSI C119.4, when properly installed on Aluminum to Aluminum or Aluminum to Copper Conductor
- High Conductivity Aluminum Splices have Solid Center Barriers and Large Chamfers to ease cable insertion
- Highly conductive Service Entrance Splice is coated with Oxide Inhibitor Compound
- See more on Amazon...
Brand: Morris | Manufacturer: Morris Products
Dimensions: 12.00 x 4.00 x 6.00 Inches | Weight: 0.02 pounds
See On Amazon #16
Morris 15500 Service Entrance Cable Hood, Non-Metallic, (3)#3 to #1 Cable Size
Asin: B00VNTRHHG | Model: 15500 | PartNumber: 15500 | Ean: 0601986155007 | UPC: 601986155007
Non-Metallic Pvc Construction.
Suitable For Outdoor Use.
Provides Protection To Service Entrance Cables.
Features
- Non-Metallic Service Entrance Cable Hoods - Non-Metallic Service Entrance Cable Hoods Provides Protection to Service Entrance Cables.
- Provides Protection to Service Entrance Cables
- Non-Metallic PVC construction
- Suitable for Outdoor use
- See more on Amazon...
Brand: Morris | Manufacturer: Morris Products
Weight: 0.64 pounds
See On Amazon #17
Morris 15380 Water-Tight Service Entrance Connector, Zinc Die Cast, 3/0 Cable Size, 2" Size, 2-Pack
Asin: B09STDWT8D | Model: 15380 | PartNumber: 15380
Used To Connect Service Entrance Cable To A Service Enclosure In Wet Locations.
U/Flat Style Conductor Only.
Accepts 2 Insulated Conductors, 1 Bare.
Compression Type Seu Connector.
Features
- Water-Tight Service Entrance Connectors - Zinc Die Cast - Water-Tight Service Entrance Connectors - Used To connect Service Entrance Cable to a Service Enclosure in wet loations.
- Compression Type SEU Connector
- Used to Connect Service Entrance Cable to a Service Enclosure in Wet Locations
- Accepts 2 Insulated Conductors, 1 Bare
- U/Flat Style Conductor Only
- See more on Amazon...
Brand: Morris | Manufacturer: Morris Products
Dimensions: 0.00 x 0.00 x 0.00 Inches
See On Amazon #18
Morris 15381 Water-Tight Service Entrance Connector, Zinc Die Cast, 4/0 Cable Size, 2" Size, 2-Pack
Asin: B09STDM63X | Model: 15381 | PartNumber: 15381
Used To Connect Service Entrance Cable To A Service Enclosure In Wet Locations.
U/Flat Style Conductor Only.
Accepts 2 Insulated Conductors, 1 Bare.
Compression Type Seu Connector.
Features
- Water-Tight Service Entrance Connectors - Zinc Die Cast - Water-Tight Service Entrance Connectors - Used To connect Service Entrance Cable to a Service Enclosure in wet loations.
- Compression Type SEU Connector
- Used to Connect Service Entrance Cable to a Service Enclosure in Wet Locations
- Accepts 2 Insulated Conductors, 1 Bare
- U/Flat Style Conductor Only
- See more on Amazon...
Brand: Morris | Manufacturer: Morris Products
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #19
Morris 15370 Water-Tight Service Entrance Connector, Zinc Die Cast, 8 Cable Size, 1" Size, 5-Pack
Asin: B09ST9NK32 | Model: 15370 | PartNumber: 15370
Used To Connect Service Entrance Cable To A Service Enclosure In Wet Locations.
U/Flat Style Conductor Only.
Accepts 2 Insulated Conductors, 1 Bare.
Compression Type Seu Connector.
Features
- Water-Tight Service Entrance Connectors - Zinc Die Cast - Water-Tight Service Entrance Connectors - Used To connect Service Entrance Cable to a Service Enclosure in wet loations.
- Compression Type SEU Connector
- Used to Connect Service Entrance Cable to a Service Enclosure in Wet Locations
- Accepts 2 Insulated Conductors, 1 Bare
- U/Flat Style Conductor Only
- See more on Amazon...
Brand: Morris | Manufacturer: Morris Products
Dimensions: 0.00 x 0.00 x 0.00 Inches
See On Amazon
Looking For Something Else?
Search