2 Truck Upfitters 17" Gas Props (17.1" Extended, 9.9" Compressed, 70 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B09T1SN1VV | Model: 171099-70-10 | PartNumber: 171099-70-10
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-04270 Or Stabilus # 1822. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 70 Pound (Each) Gas Struts. 17.1" Extended Length And 9.9" Compressed Length. This Size Of Door Shock Absorber Is For Tall, Heavy Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 70 Lbs Of Pressure, For A Total Of 140 Lbs Of Pressure. Please Note That This Does Not Mean That These Gas Lift Shocks Can Lift Something That Is 140 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approx 70-100 Lbs, Including The Weight Of The Camper Shell Locks & Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 70 pound (each) gas struts. 17.1 extended length and 9.9 compressed length. This size of door shock absorber is for tall, heavy weight rear or side camper shell doors. Each canopy shock has 70 lbs of pressure, for a total of 140 lbs of pressure. Please note that this does not mean that these gas lift shocks can lift something that is 140 lbs. the typical hinged-style door weight for this prop is approx 70-100 lbs, including the weight of the camper shell locks & keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # C16-04270 or Stabilus # 1822. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.75 x 17.50 x 0.75 inches
See On Amazon Similar To 2 Truck Upfitters 17 Gas
#1
C16-15208 15.7 inch 45Lbs/200N Gas Shocks Struts for are Leer Camper Topper Shell Rear Window, Truck Canopy Cap Cover, Pack of 2PCS.
Asin: B0869MZH3T | Ean: 0724500131469, 0603728610973 | UPC: 603728610973, 724500131469
💠[Tips] Tips For Gas Spring Used On Custom Applications. If Your Lid Or Door Weighs 20-40Lb, Just Install One. The Lid Or Door Weighs 50-85Lb, Install Both. If You Are Not Sure, Please Contact Us Before Buying, We Will Provide You With Professional Advice..
💠[12+1 Month Replacement Service] Welcome To Click "Ask Seller" Beside Your Order For In-Time Assistance If Any Problem Occurs..
💠[Interchage Number] 025311 14269Are 5003024510 5159Ex 5159Ex 5159Ex 5159Ex C1615208 C16-15208 Se150p45m10.
💠[Parameter] Compressed Length (Center-To-Center): 9.4In (239Mm). Extended Length (Center-To-Center): 15.7In (399Mm). Force: 45 Lbs/200N Per Strut. Please Measure The Length Of Your Original Shocks Before Purchasing..
Features
- [Most used for] 16" 45lb gas shock struts fit for Leer ARE camper shell topper rear window bed Cover, other custom applications such as cabinet door, outdoor bench lid, toolbox, boat lid, tarp door and so on.
- [Parameter] Compressed Length (Center-to-Center): 9.4in (239mm). Extended Length (Center-to-Center): 15.7in (399mm). Force: 45 Lbs/200N per Strut. Please measure the length of your original shocks before purchasing.
- [Tips] Tips for gas spring used on custom applications. If your lid or door weighs 20-40lb, just install ONE. The lid or door weighs 50-85lb, install both. If you are not sure, please contact us before buying, we will provide you with professional advice.
- [Interchage Number] 025311 14269ARE 5003024510 5159EX 5159EX 5159EX 5159EX C1615208 C16-15208 SE150P45M10
- [12+1 MONTH REPLACEMENT SERVICE] Welcome to Click Ask Seller BESIDE YOUR ORDER for In-time Assistance if any problem occurs.
- See more on Amazon...
Brand: Vepagoo | Manufacturer: Vepagoo
See On Amazon #2
2 Truck Upfitters 16" Gas Props (15.7" Extended, 9.4" Compressed, 38 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B01K1I47J0 | Model: 16”, 38 lbs | PartNumber: 16”, 38 lbs | Ean: 0709832096419 | UPC: 709832096419
These Gas Lift Cylinders Do Not Fit All Truck Cap/Camper Shell Brands/Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-09209 Or Stabilus # 01824. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 38 Pound (Each) Gas Struts. 15.7" Extended Length And 9.4" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 38 Lbs Of Pressure, For A Total Of 76 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 76 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 50-70 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 38 pound (each) gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 38 lbs of pressure, for a total of 76 lbs of pressure. Please note that this does not mean that it can lift something that is 76 lbs. the typical hinged-style door weight for this prop is approximately 50-70 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all truck cap/camper shell brands/models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. See pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # c16-09209 or Stabilus # 01824. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.50 x 16.00 x 0.50 inches | Weight: 0.75 Pounds
See On Amazon #3
C16-06874 17 inch 40lb/178N Gas Strut Shock Lift Support Spring for Leer Camper Shell Truck Topper Cap Canopy Door Window Toolbox Snugtop Replacement Parts, C1606874 SG359011, Set of 2 by AUCLIDIS
Asin: B0CWXRBQ85 | Model: C16-06874 | PartNumber: C16-06874
【Specifications Guide】The Extended Length Of The 17 Inch Gas Struts Measured From Ball Center To Ball Center Is 17.13 Inch, Compressed Length Measured From Ball Center To Ball Center Is 10.75 Inch, Shaft Connection: Nylon Ball Socket 10Mm, Body Connection: Nylon Ball Socket 10Mm. Force: 40Lb/178N..
【Experience Auclidis】Enjoy Our Top-Tier Service With A 12-Month Replacement Guarantee, At The Same Time, We Have A Dedicated Customer Service Team Online To Provide You With Prompt Assistance..
【Package Includes】The Package Includes 17 Inch Gas Struts*2..
【Interchange Part Numbers】C1606874, C16-06874, Sg359011. Before Making A Selection, You Can Find A Similar Interchange Part Number On The Original Gas Struts Cylinder As A Reference..
Features
- Camper Shell Replacement Part The 17 inch gas strut compatible with camper shells truck topper cap canopy door windows toolbox snugtop replacement parts. before purchasing, please ensure to buy the same gas strut replacement part based on the original oem number of the gas strut.
- Interchange Part Numbers C1606874, C16-06874, SG359011. Before making a selection, you can find a similar interchange part number on the original gas struts cylinder as a reference.
- Specifications Guide The extended length of the 17 inch gas struts measured from ball center to ball center is 17.13 inch, compressed length measured from ball center to ball center is 10.75 inch, shaft connection: Nylon ball socket 10mm, body connection: Nylon ball socket 10mm. Force: 40lb/178N.
- Package Includes The package includes 17 inch gas struts*2.
- Experience AUCLIDIS Enjoy our top-tier service with a 12-month replacement guarantee, at the same time, we have a dedicated customer service team online to provide you with prompt assistance.
- See more on Amazon...
Brand: AUCLIDIS | Manufacturer: AUCLIDIS
See On Amazon #4
2 Truck Upfitters 17" Gas Props (17.1" Extended, 9.9" Compressed, 45 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B074MF3HMP | Model: 17”, 45 lbs | PartNumber: 17”, 45 lbs | Ean: 0709832096785 | UPC: 709832096785
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-04270 Or Stabilus # 1822. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 45 Pound (Each) Gas Struts. 17.1" Extended Length And 9.9" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 45 Lbs Of Pressure, For A Total Of 90 Lbs Of Pressure. Please Note That This Does Not Mean That These Gas Lift Shocks Can Lift Something That Is 90 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approx 60-80 Lbs, Including The Weight Of The Camper Shell Locks & Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 45 pound (each) gas struts. 17.1 extended length and 9.9 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 45 lbs of pressure, for a total of 90 lbs of pressure. Please note that this does not mean that these gas lift shocks can lift something that is 90 lbs. the typical hinged-style door weight for this prop is approx 60-80 lbs, including the weight of the camper shell locks & keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # C16-04270 or Stabilus # 1822. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 1.00 x 18.00 x 2.00 Inches | Weight: 0.81 Pounds
See On Amazon #5
2 Truck Upfitters 10" Gas Props (10" ext, 6.7" Compressed, 40 lbs of Press ea) Compatible w/Std Aluminum UWS DeeZee etc Toolboxes & Camper Shell Side Windoors. Measurement REQ'D! Incl 4 Ball mounts!
Asin: B07PPQ8J49 | Model: 100067-40-10 | PartNumber: 100067-40-10
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.59 x 10.00 x 0.59 inches
See On Amazon #6
2 Truck Upfitters 10" Gas Props (10" ext, 6.7" Compressed, 45 lbs of Press ea) Compatible w/Std Aluminum UWS DeeZee etc Toolboxes & Camper Shell Side Windoors. Measurement REQ'D! Incl 4 Ball mounts!
Asin: B07PNKLZPP | Model: 100067-45-10 | PartNumber: 100067-45-10
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.59 x 10.00 x 0.59 inches
See On Amazon #7
cerfioo 132 PCS Car Center Console Button Stickers, Luminous Decorative Switch Label Stickers, Car Safety Travel Auxiliary Accessories, Suitable for Most Boats, Trailers, and Cars (Fluorescent Green)
Asin: B0CQ8988Y8 | Model: CERTZ1701FG-132PCS | PartNumber: CERTZ1701FG-132PCS
Excellent Car Interior: This Center Console Button Sticker Contains Rich Patterns And Text Labels, Which Can Meet All Car Center Console Button Installation Needs. The Cool Fluorescent Green Appearance Gives Your Worn Center Console A New Look While Serving As A Good Protective Effect..
Packaging Details: You Will Get 1 Sheet Of Glow-In-The-Dark Stickers Including 132 Icons. The Decorative Car Stickers Are Made Of Professional Non-Destructive Car Paint And Traceless Glue, Which Are Waterproof And Sun-Proof. And The Paste Is Not Easy To Fall Off, So You Can Use It With Confidence..
Driving Safety At Night: The Luminous Sticker Will Emit Fluorescence In The Dark After Absorbing Light, Helping You Clearly Distinguish The Buttons On The Center Console At Night Without Being Distracted By Looking For Buttons At Night, Which Affects Driving Safety..
Easy To Install: No Need For Tedious Disassembly And Assembly. The Adhesive Backing Of The Sticker Can Be Pasted Repeatedly. Don’T Be Afraid If The Position Is Wrong. It Is Easy To Adjust. It Is Recommended That If You Paste It In A Cold Environment, You Can Use A Hair Dryer To Blow The Hot Glue To Soften It And Make The Paste Better..
Features
- High-Quality Material: This luminous sticker is made of high-quality luminous material, which uses the principle of light storage. After the sticker absorbs light, you can see it glow in a dark environment. The more light it absorbs, the more obvious the luminous effect will be.
- Easy to Install: No need for tedious disassembly and assembly. The adhesive backing of the sticker can be pasted repeatedly. Don t be afraid if the position is wrong. It is easy to adjust. It is recommended that if you paste it in a cold environment, you can use a hair dryer to blow the hot glue to soften it and make the paste better.
- Excellent Car Interior: This center console button sticker contains rich patterns and text labels, which can meet all car center console button installation needs. The cool fluorescent green appearance gives your worn center console a new look while serving as a Good protective effect.
- Driving Safety at Night: The luminous sticker will emit fluorescence in the dark after absorbing light, helping you clearly distinguish the buttons on the center console at night without being distracted by looking for buttons at night, which affects driving safety.
- Packaging Details: You will get 1 sheet of glow-in-the-dark stickers including 132 icons. The decorative car stickers are made of professional non-destructive car paint and traceless glue, which are waterproof and sun-proof. And the paste is not easy to fall off, so you can use it with confidence.
- See more on Amazon...
Brand: cerfioo | Manufacturer: cerfioo
Warranty: Manufacturer warranty for 30 days from date of purchase.
See On Amazon #8
2 Truck Upfitters 17" Gas Props (17.1" Extended, 9.9" Compressed, 28 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B09T1H6WGF | Model: 171099-28-10 | PartNumber: 171099-28-10
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-04270 Or Stabilus # 1822. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 28 Pound (Each) Gas Struts. 17.1" Extended Length And 9.9" Compressed Length. This Size Of Shock Absorber Is For Tall Height & Light Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 28 Lbs Of Pressure, For A Total Of 56 Lbs Of Pressure. Please Note That This Does Not Mean That These Gas Lift Shocks Can Lift Something That Is 56 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approx 30-45 Lbs, Including The Weight Of The Camper Shell Locks & Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 28 pound (each) gas struts. 17.1 extended length and 9.9 compressed length. This size of shock absorber is for tall height & light weight rear or side camper shell doors. Each canopy shock has 28 lbs of pressure, for a total of 56 lbs of pressure. Please note that this does not mean that these gas lift shocks can lift something that is 56 lbs. the typical hinged-style door weight for this prop is approx 30-45 lbs, including the weight of the camper shell locks & keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # C16-04270 or Stabilus # 1822. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
See On Amazon #9
2 Truck Upfitters 17" Gas Props (17.1" Extended, 9.9" Compressed, 85 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B09T1PPJ3X | Model: 171099-85-10 | PartNumber: 171099-85-10
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-04270 Or Stabilus # 1822. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 85 Pound (Each) Gas Struts. 17.1" Extended Length And 9.9" Compressed Length. This Size Of Door Shock Absorber Is For Tall Heavy Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 85 Lbs Of Pressure, For A Total Of 170 Lbs Of Pressure. Please Note That This Does Not Mean That These Gas Lift Shocks Can Lift Something That Is 170 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approx 80-120 Lbs, Including The Weight Of The Camper Shell Locks & Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 85 pound (each) gas struts. 17.1 extended length and 9.9 compressed length. This size of door shock absorber is for tall heavy weight rear or side camper shell doors. Each canopy shock has 85 lbs of pressure, for a total of 170 lbs of pressure. Please note that this does not mean that these gas lift shocks can lift something that is 170 lbs. the typical hinged-style door weight for this prop is approx 80-120 lbs, including the weight of the camper shell locks & keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # C16-04270 or Stabilus # 1822. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.75 x 17.50 x 0.75 inches
See On Amazon
Looking For Something Else?
Search