Wired DC-DC 10Amp Isolated Solid State Relay Module, SSR in 3-32VDC Out 5-30VDC, for Raspberry-Pi Arduino ESP32 PLC MCU DSP
Asin: B09T3RT5MG | Model: F-1049 | PartNumber: F-1049 | Ean: 6954525592912
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Output Voltage Range: Dc 5 To 30V. Maximum On-State Average Current 10 Amp. Maximum On-State Current 20 Amp (< 2 Second). Non Repetitive Surge Peak On-State Current: 160 Amp (<400Us). Maximum On-State Resistance 8 Milliohms(0.008 Ohm)..
Compact Abs Plastic Case And Wires Connect For Easy Mount. Two Screw Mounting Holes Are Convenient For You To Fix It On The Wall Or Wooden Board. Of Course, You Can Also Choose Not To Lock The Screw..
This Is A Simple And Practical Solid State Relay Module, Which Is Very Convenient To Use, For Arduino, Raspberry Pi, Esp32, Plc Or Other Projects. The Gpio Of These Controllers Are Directly Connected To This Relay Input To Control The 5 To 30V High Current Dc Power..
Input Signal Turn-On Voltage Dc 3 To 32V, Turn-Off Voltage Dc 0 To 0.8V. Led Indication For Relay Turn-On..
Features
- Photocoupler isolation between input control signal and controlled power, isolation surge voltage up to 5000V.
- Input signal turn-on voltage DC 3 to 32V, turn-off voltage DC 0 to 0.8V. LED indication for relay turn-on.
- Output voltage range: DC 5 to 30V. Maximum on-state average current 10 Amp. Maximum on-state current 20 Amp (< 2 second). Non repetitive surge peak on-state current: 160 Amp (<400uS). Maximum on-state resistance 8 milliohms(0.008 ohm).
- This is a simple and practical solid state relay module, which is very convenient to use, for Arduino, Raspberry Pi, ESP32, PLC or other projects. The GPIO of these controllers are directly connected to this relay input to control the 5 to 30V high current DC power.
- Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw.
- See more on Amazon...
Brand: OONO | Manufacturer: CZH-LABS
See On Amazon Similar To Wired DCDC 10Amp Isolated Solid
#1
Anncus DCDC Wide Voltage Isolated Power Module, Guide Rail Installation, Isolated Voltage stabilized Power Supply, 24V to 12V
Asin: B095NBBCZ5
Condition: New.
Brand: Anncus | Manufacturer: Anncus
See On Amazon #2
Victron Energy Orion-Tr Smart 12/24-Volt 15 amp 360-Watt DC-DC Charger Isolated (Bluetooth)
Asin: B07YMSJB7D | Model: NT-1126 | PartNumber: NT-1126 | Ean: 8719076047704
Bluetooth Smart Enabled: The Unit Can Be Monitored And Programmed Via Bluetooth And Can Be Remotely Controlled Via A Remote On/Off Switch.
For Use In Dual Battery Systems In Vehicles Or On Boats Where The Alternator And The Start Battery Are Used To Charge The Service Battery.
Screw Terminals: The Screw Terminals Give The Advantage Of Not Needing Any Special Tools For Installation.
Suitable For Both Lead Acid And Lithium Batteries, Unlimited Multiple Units Can Be Connected In Parallel To Increase Output Power.
Features
- Victron Energy Orion-Tr Smart 12/24-Volt 15 amp 360-Watt DC-DC charger Isolated is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth
- Suitable for both lead acid and lithium batteries, unlimited multiple units can be connected in parallel to increase output power
- Bluetooth Smart enabled: The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch
- Screw terminals: The screw terminals give the advantage of not needing any special tools for installation
- For use in dual battery systems in vehicles or on boats where the alternator and the start battery are used to charge the service battery
- See more on Amazon...
Brand: Victron Energy | Manufacturer: Victron Energy
Dimensions: 7.32 x 2.76 x 5.12 Inches | Weight: 3.97 pounds
Warranty: Warranty
See On Amazon
Looking For Something Else?
Search