Bus Bars Connector Red Copper Nickel Plate Pitch Row 83mm Lifepo4 Cell Lithium battery Busbar
Asin: B09TFJ4XHG
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【About Vnsznr】Benefit From Advanced Equipment And Strict Quality Testing Standard, Trying To Bring Our Customers The Most Cost-Effective And Quality Products..
【What You Get】4 Pcs*Bus Bars Connector Pitch Row 83Mm.24-Months Warranty And Friendly Customer Service..
【Widely Applications】Lifepo4 Lithium Batteries Diy Cell 3.2V 50Ah 60Ah 100Ah 120Ah 200Ah 280Ah 300Ah,Etc..
【Materials】 Made Of Grade A Red Copper With Nickel-Plated Which Offers A High Level Of Chemical And Corrosion Resistance..
Features
- Pitch Row 83mm Specification Hole Distance:83mm/3.26inch; Length:102mm/4.01inch; Width:20mm/0.78inch; Hole Type:M6.
- Materials Made of grade A red copper with nickel-plated which offers a high level of chemical and corrosion resistance.
- About VNSZNR Benefit from advanced equipment and strict quality testing standard, trying to bring our customers the most cost-effective and quality products.
- Widely applications Lifepo4 lithium batteries DIY Cell 3.2V 50Ah 60ah 100ah 120ah 200ah 280ah 300ah,etc.
- What You Get 4 PCS*Bus Bars Connector Pitch Row 83mm.24-months warranty and friendly customer service.
- See more on Amazon...
Brand: VNSZNR | Manufacturer: VNSZNR
Dimensions: 0.79 x 4.02 x 0.08 Inches
See On Amazon Similar To Bus Bars Connector Red Copper
#1
WUPP 12 Volt Fuse Block, Waterproof Boat Fuse Panel with LED Warning Indicator Damp-Proof Cover, 6 Circuits with Negative Bus Fuse Box for Car Marine RV Truck DC 12-24V
Asin: B07GBV2MHN | Model: CS-664A1 | PartNumber: CS-664A1
Universal Protection: The Input Rated Voltage Of The Fuse Box Is 32V,And The Input Rated Current Is 100A.Each Circuit Outputs A Maximum Current Of 30A. All Bus Bars And Fuse Pieces Are Nickel-Plated Copper, Corrosion-Resistant And Highly Conductive..
Free Blade Fuses: 6-Way Package Includes: 20A Fuse*4, 15A Fuse*4, 10A Fuse*2, 5A Fuse*2, Labels*2, Screws*4.
Safe Material: Pbt Flame Retardant Material Base,Good Mechanical Strength And High Temperature Resistance. It Is Insulated, Heat Resistant And Flame Resistant. There Will Hardly Cause Any Issue Like Produce Fracture, Deformation, Combustion Or Short Circuit Phenomenon..
Make Wiring Clean: Instead Of Piling A Mess Of Wires And Fuse Holders Onto Your Battery Posts, Wupp 12 Volt Fuse Block/Ground Bus Kit Gives You 6 Dedicated Fuses And 6 Ground Locations To Keep All Of Your Wires Clean, Organized, And Accessible. Made Wiring Electronics In Your Vehicles Or Boat A Breeze!.
Features
- QUICK FIX: When the current/voltage exceeds the rated range,the fuse will be automatically blown.It has leds beside each load to indicate if a circuit has shorted or has blown.So you can easily identify it and change it!
- MAKE WIRING CLEAN: Instead of piling a mess of wires and fuse holders onto your battery posts, WUPP 12 volt fuse block/ground bus kit gives you 6 dedicated fuses and 6 ground locations to keep all of your wires clean, organized, and accessible. Made wiring electronics in your vehicles or boat a breeze!
- UNIVERSAL PROTECTION: The input rated voltage of the fuse box is 32V,and the input rated current is 100A.Each circuit outputs a maximum current of 30A. All bus bars and fuse pieces are nickel-plated copper, corrosion-resistant and highly conductive.
- SAFE MATERIAL: PBT flame retardant material base,good mechanical strength and high temperature resistance. It is insulated, heat resistant and flame resistant. There will hardly cause any issue like produce fracture, deformation, combustion or short circuit phenomenon.
- FREE BLADE FUSES: 6-Way Package includes: 20A Fuse*4, 15A Fuse*4, 10A Fuse*2, 5A Fuse*2, Labels*2, Screws*4
- See more on Amazon...
Brand: WUPP | Manufacturer: WUPP
Dimensions: 1.44 x 3.45 x 3.35 Inches
Warranty: For any questions, please do not hesitate to contact our customer service mail, resend or refund is avaliable
See On Amazon #2
RED WOLF 60Amp Circuit Breaker for Boat Trolling Motor Marine ATV Trailer Vehicles Stereo Audio Electronic Battery Solar System Inline Fuse with Manual Reset Switch Waterproof DC 12V-48V
Asin: B08LYG7ZYF | Ean: 0769894718285 | UPC: 769894718285
Manual Reset: Unique On/ Off Reset Push Button, Mounted On Panel Or Firewall, Can Used As A Kill Switch. No Need To Buy More Replacing Fuses..
Use The Waterproof Cover To Better Prevent Rust From Metal Parts. Max Current 60A; Voltage Dc 24V..
Application: Used In Auxiliary And Accessory Circuits For Fit To Boat Marine Rv Yacht Battery Trailer Bus Truck Atv Winches Applications. Also Used In Battery Charges And Dc Sound Amplifier System..
Solid Breaker: New Design With Waterproof Resistant Housing And Solid Build. Fuse Breaker Holders Have Pass Professional Electrical Performance Test And Aging Test, The Switch Button Is On/Off Smoothly, Reliable Quality..
Features
- Protect your system: using as circuit breaker and battery Disconnect, allows to charge or maintain the battery without having to disconnect all the wires! protect excessive current between battery or electrical from damage.
- Solid breaker: new design with waterproof resistant housing and solid build. Fuse breaker Holders have Pass professional electrical performance test and aging test, the switch button is on/off smoothly, reliable quality.
- Manual reset: Unique on/ off reset push button, mounted on panel or firewall, can used as a kill switch. No need to buy more replacing fuses.
- Application: used in auxiliary and accessory circuits for fit to Boat Marine RV Yacht Battery Trailer Bus Truck ATV Winches applications. Also used in battery charges and DC sound amplifier system.
- Use the waterproof cover to better prevent rust from metal parts. Max current 60A; Voltage DC 24V.
- See more on Amazon...
Brand: RED WOLF | Manufacturer: RED WOLF
Dimensions: 0.75 x 3.90 x 2.70 inches
See On Amazon #3
Nilight Led Pods 2PC 4Inch Triple Row Led Light Bar 60W Flood Spot Combo 6000LM Super Bright Off Road Driving Fog Light Boat Lights Work Light,2 Years Warranty
Asin: B07D5S1SF5 | Model: 18021F-B | PartNumber: 18021F-B | Ean: 0726853899652 | UPC: 726853899652
Sliding Mounting Bracket: The Sturdy Bracket Can Firmly Fix The Light Bar. Quakeproof When Passing Through Rugged Terrain;.
Better Heat Dissipation: Special Designed 6063 Aluminum Profile With Thermal Grease Can Improve The Heat Dissipation Ability ;.
Fit Type: Universal Fit,2 Years Warranty By Nilight.
Waterproof Rate: Ip67 Rate, Seamless Protective Housing With Waterproof Glue, Great Performance Of Waterproof, Dustproof And Quakeproof;.
Combo Beam: Appropriate Combination Of Spot Beam And Flood Beam For Wide Spread And Further Distance Illumination;.
Features
- BRIGHTNESS: Powerful 60W LED light bar, high-quality Led chips and clear PC lens, this LED pod emits 6000k pure white light, effectively light up the dark road during night;
- COMBO BEAM: Appropriate combination of spot beam and flood beam for wide spread and further distance illumination;
- SLIDING MOUNTING BRACKET: The sturdy bracket can firmly fix the light bar. Quakeproof when passing through rugged terrain;
- WATERPROOF RATE: IP67 rate, Seamless protective housing with waterproof glue, great performance of waterproof, dustproof and quakeproof;
- BETTER HEAT DISSIPATION: Special designed 6063 Aluminum profile with Thermal grease can improve the heat dissipation ability ;
- Fit Type: Universal Fit,2 Years Warranty by Nilight
- See more on Amazon...
First Available: 08/01/2018
Brand: Nilight | Manufacturer: Nilight
Weight: 1.00 pounds
Warranty: 2 Years Warranty
See On Amazon #4
LINKITOM New Submersible LED Trailer Light Kit, Super Bright Brake Stop Turn Tail License Lights for Camper Truck RV Boat Snowmobile Over 80" Inches
Asin: B07RQR7DGV | Ean: 0608631397119 | UPC: 608631397119
Compliant With Dot Approved Standards: The Lamp Shade Of Utility Trailer Light Kit With Corrosion Resistant Abs Material, Compliant With Dot Approved Standards.
Widely Used: Widely Applicable To 80 Inch Width Tractor, Such As Truck, Trailer, Boat, Bus, Lorry, Van, Caravan, Snowmobile, Etc. Please Make Sure Wires Connect Correctly And No Electronic Short Before Underwater..
25Ft Wiring Harness Have Superior Quality Guaranteed Than The Traditional Copper Coated Aluminum Wires And Split Y-Style Color Coded Harness. Fully Operable In Inclement Weather, These Trailer Lights Are Tough And Used For The Long Term..
Ip68 Waterproof And Submersible: There Is No Screw On The Lamp Shade , The Led Trailer Lights Are Completely Welded Together, The Circuit Board Of Tail Light Is Seal. A Drain Hole Is Designed To Pull Out All The Water. This Is To Guarantee That Water Will Not Damage The Diodes Or Circuit Board. Excellent Tightness Makes It Be Definitely Waterproof And Submersible.Please Install The Trailer Taillights With The Drain Hole Downwards..
Features
- HALO Trailer Light Kit : Trailer tail light kits has everything you need, includes two stop turn LED tail lights(Unique halo glow and solid light pattern design, different from other trailer taillights on the market), two amber clearance lights, one 22 feet and one 4 feet wiring harness, license plate bracket, 4pcs complimentary reflective sticker.
- IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. A drain hole is designed to pull out all the water. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.Please install the trailer taillights with the drain hole downwards.
- Compliant with DOT approved standards: The lamp shade of utility trailer light kit with corrosion resistant ABS material, compliant with DOT approved standards
- 25ft wiring harness have superior quality guaranteed than the traditional copper coated aluminum wires and split Y-style color coded harness. Fully operable in inclement weather, these trailer lights are tough and used for the long term.
- Widely Used: Widely applicable to 80 Inch width tractor, such as truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc. Please make sure wires connect correctly and no electronic short before underwater.
- See more on Amazon...
Brand: LINKITOM | Manufacturer: Linkitom
Weight: 1.00 Pounds
See On Amazon #5
Nilight 2PCS 16 AWG 10 Feet Wiring Harness Extension Kit for LED Work Light Bar Led Pods Off Road Lights Driving Fog Light Boat Lighting, 2 Years Warranty,black
Asin: B08B7QRWTF | Model: 10035W | PartNumber: 10035W | Ean: 0781621092741 | UPC: 781621092741
Play And Plug Design Makes The Extension Wires Installed Easily.
Package Include: 2 X Wiring Harness Extension Kit, 2 Years Warranty Honored By Nilight.
Wide Application: Suitable For Almost All 12V Battery Vehicles, Such As Jeeps, Atvs, Utvs, Cars, Motorcycles, Ships, Yachts And Trailers.
High-Quality: The Wiring Harness Extension Kit Made Of 16 Gauge Flexible Strand Copper Wire, Rubber Protected, High Quality Pvc Insulation Tube Protect The Whole Harness From Overheat..
Features
- 10ft Extension Wires: 16AWG wiring harness extension cable. It s enough to extend your wiring harness where you want to install lighting location to help you mount LED work lights in truck or cabin easily..Fit Type: Universal
- High-quality: The Wiring Harness Extension Kit made of 16 Gauge flexible strand copper wire, rubber protected, High quality PVC insulation tube protect the whole harness from overheat.
- Play and Plug design makes the extension wires installed easily
- Wide Application: Suitable for almost all 12V battery vehicles, such as jeeps, ATVs, UTVs, cars, motorcycles, ships, yachts and trailers
- Package Include: 2 x Wiring Harness Extension Kit, 2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Year Warranty
See On Amazon #6
Nilight 10016W DT Wiring Harness Kit for LED Light Bars - 12V On/Off Switch, Power Relay, Blade Fuse - 2 Leads, 2 Years Warranty
Asin: B076C4MXR1 | Model: 10016W | PartNumber: 10016W | Ean: 0749882625184 | UPC: 749882625184
Simple Connection: Equipped With Dt Connector, No Wiring Between Led Light Bar And The Harness Kit, Simple And Easy Installation.
Package Includes: 1 X 12 Feet Wiring Harness Kit, 1 X Instructions, 2 Years Warranty Honored By Nilight.
Circuit Protection: Power Relays Together With Inline Blade Fuse To Defense Against Overcurrent And Short Circuit, Ensuring Safety.
Two Leads Available: With 2 Sets Of Light Output Connectors For Dual Lighting Fixtures Less Than 180W, More Stable Connection.
Features
- Universal fit: this harness kit is compatible with all automobiles, boats and devices that use a 12V power source
- Two leads Available: with 2 Sets of light output connectors for dual lighting fixtures less than 180W, more stable connection
- Simple connection: equipped with DT connector, no wiring between LED light bar and the harness kit, simple and easy installation
- Circuit protection: power relays together with inline blade fuse to defense against overcurrent and short circuit, ensuring safety
- Package includes: 1 x 12 feet wiring harness kit, 1 x instructions, 2 Years Warranty Honored by Nilight
- See more on Amazon...
First Available: 11/26/2017
Brand: Nilight | Manufacturer: Nilight
Dimensions: 1.00 x 4.00 x 2.00 Inches | Weight: 0.50 Pounds
Warranty: 2 Years Warranty
See On Amazon #7
LINKITOM Submersible LED Trailer Light Kit, Super Bright Brake Stop Turn Tail License Lights for Camper Truck RV Boat Snowmobile Under 80" Inch
Asin: B07H3KWK1Y | Ean: 0608631396877 | UPC: 608631396877
Compliant With Dot Standards: The Lamp Shade Of Utility Trailer Light Kit With A New Abs Material, Compliant With Dot Standards.
Widely Used : Widely Applicable To 80 Inch Width Tractor, Such As Truck, Trailer, Boat, Bus, Lorry, Van, Caravan, Snowmobile, Etc. Please Make Sure Wires Connect Correctly And No Electronic Short Before Underwater..
25Ft Wiring Harness Have Superior Quality Guaranteed Than The Traditional Copper Coated Aluminum Wires And Split Y-Style Color Coded Harness. Fully Operable In Inclement Weather, These Trailer Lights Are Tough And Used For The Long Term..
Ip68 Waterproof And Submersible: There Is No Screw On The Lamp Shade , The Led Trailer Lights Are Completely Welded Together, The Circuit Board Of Tail Light Is Seal. This Is To Guarantee That Water Will Not Damage The Diodes Or Circuit Board. Excellent Tightness Makes It Be Definitely Waterproof And Submersible..
Features
- Trailer Light Kit : Led boat trailer light kits has everything you need,includes two stop turn signals LED marker lights, two amber clearance lights, one 22 feet and one 4 feet wiring harness, license plate bracket, 4pcs complimentary reflective sticker.
- IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.
- Compliant with DOT standards: The lamp shade of utility trailer light kit with a new ABS material, compliant with DOT standards
- 25ft wiring harness have superior quality guaranteed than the traditional copper coated aluminum wires and split Y-style color coded harness. Fully operable in inclement weather, these trailer lights are tough and used for the long term.
- Widely Used : Widely applicable to 80 Inch width tractor, such as truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc. Please make sure wires connect correctly and no electronic short before underwater.
- See more on Amazon...
Brand: LINKITOM | Manufacturer: Linkitom
Weight: 1.00 Pounds
See On Amazon #8
Mofeez Power Distribution Block Bus Bar, 4 x 3/8" Posts, 6 x #8 Screws Terminals, Max 48V 250A (Pair, Red & Black)
Asin: B09J24J338 | Model: 98MF18044 | PartNumber: 98MF18044 | Ean: 0742484179413, 0653461673018 | UPC: 742484179413, 653461673018
Built For Safe --- Nickle Plated Brass Busbar Plates Offer Low Resistance, Maximum Conductivity, And Corrosion Protection. The Nylon Nuts Connect To Two External Studs To Prevent Accidental Short Circuits. A Removable Nylon Cover Keeps Metal Components From Making Contact With Anything. The Insulated Nylon Base Is Flame-Retardant..
Wide Applications --- Mofeez Bus Bar Is An Excellent Circuit Collection Wire Harness In The Car, Rv, Yacht, Caravan, And Ship Power System. The Busbar Holds Wide Cables Securely To Keep The Wires Neat..
Distribute Power More Efficiently --- Provides Several Large Gauge Connections For Running A Dedicated Ground To The Battery And Offers More Minor Gauge Connections For Lower Voltage..
Operating Voltage/Amperage Range --- Max Voltage: 48Vdc. Max Continuous Amperage: 250A For The Entire Connection. Maximum Intermittent: 20A For Each Connection (Less Than 1 Minute). So Whether Your Working On A Boat, A Car, Or An Rv, We've Got You Covered..
Features
- Basic Parameters --- 6*#8 stainless steel terminal screws, 4*3/8" studs. The dimensions: 6.7"Lx1.3"Wx2.1H".
- Operating Voltage/Amperage range --- Max voltage: 48VDC. Max continuous amperage: 250A for the entire connection. Maximum intermittent: 20A for each connection (less than 1 minute). So whether your working on a boat, a car, or an RV, we've got you covered.
- Built for Safe --- Nickle plated brass busbar plates offer low resistance, maximum conductivity, and corrosion protection. The nylon nuts connect to two external studs to prevent accidental short circuits. A removable Nylon cover keeps metal components from making contact with anything. The insulated nylon base is flame-retardant.
- Distribute Power More Efficiently --- Provides several large gauge connections for running a dedicated ground to the battery and offers more minor gauge connections for lower voltage.
- Wide Applications --- Mofeez bus bar is an excellent circuit collection wire Harness in the car, RV, yacht, caravan, and ship power system. The busbar holds wide cables securely to keep the wires neat.
- See more on Amazon...
Brand: MOFEEZ | Manufacturer: Mofeez
Dimensions: 3.00 x 8.00 x 4.00 inches | Weight: 1.00 Pounds
See On Amazon #9
Nilight - 90001B LED Light Bar Rocker Switch 5Pin Laser On/Off LED Light 20A/12V 10A/24V Switch Jumper Wires Set for Jeep Boat Trucks,2 Years Warranty,Blue
Asin: B06ZZJ3T6Q | Model: 90001B | PartNumber: 90001B | Ean: 0600537016354 | UPC: 600537016354
Sturdy And Durable: Made Of High-Quality Plastic And Well-Conductive Pins; Laser-Etched Pattern, Not Easy To Fade Away.
Package Included: 1X 5 Pin Rocker Switch, 1X Jumper Wires Set, 1X Diagrams. 2 Year Warranty By Nilight..
Wide Application: Standard 5 Pin Switch, Rated At 20Amp/12V And 10Amp/24V, Available For Upgrading Most Wiring Harness To Control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights And Auxiliary Lamps, Etc..
Cool Illuminated Light: Built-In Two Premium Leds Emits Soft Light To Illuminate The Patterns, Easy For You To Find The Switch In The Dark.
Features
- Easy to install and use: 5 pin on-off rocker switch with SPST design (single pole single Throw), simple installation, freely turn on or off the light
- Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark
- Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away
- WIDE APPLICATION: standard 5 Pin switch, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc.
- Package included: 1X 5 pin rocker switch, 1X jumper wires set, 1X diagrams. 2 Year Warranty by Nilight.
- See more on Amazon...
First Available: 05/09/2017
Brand: Nilight | Manufacturer: Nilight
Dimensions: 0.39 x 0.79 x 0.39 Inches | Weight: 0.03 pounds
Warranty: 2 Years Warranty
See On Amazon #10
Joinfworld 250A 12V Bus Bar 3/8" Power Distribution Block 4 Studs Junction Block Automotive Marine Battery Busbar Terminal Block 12 Volt with Cover - Negative&Positive
Asin: B0B2JGKTFN | Model: BB250-T4M10S3-C-RB-2 | PartNumber: BB250-T4M10S3-C-RB-2 | Ean: 0751717591571 | UPC: 751717591571
★ 3/8" Stud Terminal ★ - The Battery Bus Bar Terminal Block Includes 4 X 3/8" Studs Terminal And 3 X #8 Screw Terminals, Which Makes The 12V Junction Block Able To Accept Large Size Terminal Connectors And Wires. The Nylon Bottom Is Also Secured By M10 Post Which Makes It More Fixed And Won't Strip..
★Wide Application ★ - The 12 Volt Bus Bar With Cover Aims To Make The Wiring Of Circuit Become Neat And Tidy, Preventing Mess Harness From Causing Electric Short Circuit, Suitable For Automotive, Car, Truck, Marine, Boat, Solar Wiring..
★ Protect Cover & Nuts ★ - Each Power Busbar Will Come With A Protect Cover And Two Nuts, Which Helps To Shelter As Much Exposed Area As Possible To Reduce The Risks Of Accidental Contact And Prevent Short Circuit, Makes The Circuit Safer..
★ 250A Rating ★ - The Battery Distribution Block Rated 250A When Work In 12V Circuit, And The Battery Terminal Block Can Handle Max 48V..
Features
- Upgrade & Thicken - A pair of 12V power distribution block, includes a red and a black power distribution block(Positive&Negative). It comes with 3.8MM Thicker Copper Bus Bar Plate which can be connected to wider range of cables.
- 250A Rating - The battery distribution block rated 250A when work in 12v circuit, and the battery terminal block can handle MAX 48V.
- 3/8 Stud Terminal - The battery bus bar terminal block includes 4 x 3/8 studs terminal and 3 x #8 screw terminals, which makes the 12V junction block able to accept large size terminal connectors and wires. The nylon bottom is also secured by M10 post which makes it more fixed and won't strip.
- Protect Cover & Nuts - Each power busbar will come with a protect cover and two nuts, which helps to shelter as much exposed area as possible to reduce the risks of accidental contact and prevent short circuit, makes the circuit safer.
- Wide Application - The 12 volt bus bar with cover aims to make the wiring of circuit become neat and tidy, preventing mess harness from causing electric short circuit, suitable for automotive, car, truck, marine, boat, solar wiring.
- See more on Amazon...
Brand: Joinfworld | Manufacturer: Joinfworld
Dimensions: 2.10 x 6.60 x 1.30 Inches
See On Amazon #11
XHF 1 Inch (25mm) 3:1 Waterproof Heat Shrink Tubing Marine Grade Wire Cable Adhesive Lined Tube Insulation Seal Against Moisture Corrosion and Air Leakage, 4 Ft Black
Asin: B07FPKVMTW | Ean: 0680580743513 | UPC: 680580743513
[The Rubber Liner Has Good Sealing Performance] Xhf Heat-Shrinkable Tube Has The Advantages Of Good Electrical Insulation, Good Sealing, Corrosion Resistance And High Temperature Resistance. Anti-Aging, Tough, Not Easy To Break..
[Diversity] We Have Three Kinds Of Shrinkage (2:1, 3:1, 4:1) Heat Shrink Tubes For You To Choose From..
[Easy And Fast] You Only Need To Heat It Evenly With A Hot Air Blower Or A Candle To Make It Shrink. It Is A 3:1 Heat Shrink Ratio And Will Shrink To The Original 1/3..
[A Wide Range Of Applications] Shrink Tube Are Mainly Used For Industrial, Ship, Wire Links, Anti-Rust And Anti-Corrosion Protection Of Solder Joints, And Audio And Electrical Diy. Wire Ends, Harnesses, Electronics Protection And Insulation Treatment, Fitness Equipment Parts And Steel Structure Surface Protection And So On..
Features
- [Better protection]: double wall heat shrink tube and lined with glue can better act on the wrapped objects.
- [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on.
- [The rubber liner has good sealing performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break.
- [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 3:1 heat shrink ratio and will shrink to the original 1/3.
- [Diversity] We have three kinds of shrinkage (2:1, 3:1, 4:1) heat shrink tubes for you to choose from.
- See more on Amazon...
Brand: XHF | Manufacturer: XHF
See On Amazon #12
CableCreation USB to RS232 Adapter with PL2303 Chipset, 6.6ft USB 2.0 Male to RS232 Female DB9 Serial Converter Cable for Cashier Register, Modem, Scanner, Digital Cameras, CNC,Black
Asin: B0769DVQM1 | Model: CD0489 | PartNumber: CD0489 | Ean: 0600292878938, 0600292878907 | UPC: 600292878907, 600292878938
Easy Connectivity: Usb To Rs232 Adapter Works With Models, Isdn Terminal Adapters, Digital Cameras, Label Writers, Palm Pcs (Windows 11, 10, Windows 8, Windows 7--Should Auto Detect And Install The Drivers), Pdas, Cashier Register, Cnc, Plc Controller, Tax Printer, Pos, Bar Code Scanner, Label Printer, And Devices With Db9 Serial Ports Please Note That It’S Not Compatible With Cutting Plotter, Scm..
Cablecreation Offers 24 Month Product Warranty And Easy To Reach Lifetime Customer Services.This Usb To Rs232 Adapter Is A Usb 2.0 Male To Rs232 Female Db9 Serial Converter Cable, Suitable For Customers With Rs232 Female Head Requirements With The Same Pin Definition.If You Have Any Problem With This Item Please Do Not Hesitate To Contact With Us..
Tinned Copper Conductor And Triple Shielding Ensure The Best Data Transfer Rate. Usb Bus Powered, No External Power Adapter Required. ★If Not Recognized, You May Need To Use This Serial Adapter With A Null Modem Adapter.★.
Latest Prolific Pl2303 Chipset. Supports Windows 11/10/8.1/8/7/Linux /Mac Os; ★Drivers Can Be Downloaded At Cablecreation Website.★.
Features
- Gold Plated USB 2.0 Male to RS232 Female DB9 Serial Cable connects a serial DB9 (9 PIN) device, such as a modem, to a USB port on your computer. USB port with 1Mbps data transfer rate. NOTE: It's USB to RS232 FEMALE adapter!!!
- Latest Prolific PL2303 chipset. supports Windows 11/10/8.1/8/7/Linux /Mac OS; Drivers can be downloaded at Cablecreation website.
- Easy Connectivity: USB to RS232 adapter works with models, ISDN terminal adapters, digital cameras, label writers, palm PCs (Windows 11, 10, Windows 8, windows 7--should auto detect and install the drivers), PDAs, cashier register, CNC, PLC controller, tax printer, POS, bar code scanner, label printer, and devices with DB9 serial ports Please note that it s not compatible with Cutting plotter, SCM.
- Tinned Copper Conductor and triple shielding ensure the best data transfer rate. USB bus powered, no external power adapter required. If not recognized, you may need to use this serial adapter with a null modem adapter.
- CableCreation offers 24 month product warranty and easy to reach lifetime customer services.This USB to RS232 Adapter is a USB 2.0 male to RS232 female DB9 serial converter cable, suitable for customers with RS232 female head requirements with the same pin definition.If you have any problem with this item please do not hesitate to contact with us.
- See more on Amazon...
Brand: CableCreation | Manufacturer: CableCreation
Dimensions: 0.71 x 9.29 x 6.10 Inches | Weight: 0.02 pounds
See On Amazon #13
Nilight LED Light Bar 20 Inch 126W Spot Flood Combo Led Off Road Lights 12V 5Pin Rocker Switch LED Light Bar Wiring Harness Kit, 2 Years Warranty, Model: ZH082, Clear
Asin: B074QLYY1R | Model: ZH082 | PartNumber: ZH082 | Ean: 0600537011465 | UPC: 600537011465
Two Available Leads: 12 Foot Extendable Wiring Harness, Two Sets Of Light Output Connectors For Dual Light Fixtures Less Than 180W.
Package Includes: 1Pc 126W Led Light Bar, 1 X 5Pin Rocker Switch Wiring Harness Kit,2 Years Warranty By Nilight.
Wide Application: Suitable For Almost All 12V Battery Vehicles, Such As Jeeps, Atvs, Utvs, Cars, Motorcycles, Ships, Yachts And Trailers.
Adjustable Mounting Bracket: With Adjustable Mounting Bracket, The Work Light Can Adjust To About 45 Degrees, Which Makes Changing Direction Of Light Beam Easier. The Lamp Can Be Slid After Install The Accessory..
Features
- Bright Ray For Clear Visibility: The appropriate mix and match of spot beams and flood beams provides a long irradiation distance and broad view
- Adjustable Mounting Bracket: With adjustable mounting bracket, the work light can adjust to about 45 degrees, which makes changing direction of light beam easier. The lamp can be slid after install the accessory.
- Two Available Leads: 12 foot extendable wiring harness, two Sets of light output connectors for dual light fixtures less than 180W
- Wide Application: suitable for almost all 12V battery vehicles, such as jeeps, ATVs, UTVs, cars, motorcycles, ships, yachts and trailers
- Package Includes: 1PC 126W LED Light Bar, 1 x 5Pin Rocker Switch Wiring Harness Kit,2 Years Warranty by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon #14
Spartan Power Replacement Jumper Cable Heavy Duty Car Battery Clamps - Clamp Ends Replacements for Jump Starter Cables - Two Clamps, Red & Black
Asin: B08843STJ1 | Model: SUVELAM | PartNumber: SUVELAM | Ean: 0810019980688 | UPC: 810019980688
Tough & Durable: We Don't Settle For Cheap, Flimsy Plastic—We Want To Bring You High Quality Products That Last A Lifetime; Our Clamps Are Made From Durable And Rugged Nylon Based, Glass-Filled Plastic That Is As Tough As They Come.
Giving Power To The People: Helping People Arm Themselves With The Right Tools And Accessories, Spartan Power Manufactures Ultra-High Quality, Made In The Usa Products Every Day In Reno, Nevada; Trusted By Professionals, Enthusiasts, And Diyers Everywhere.
For Terminated Cables Only: Adequate Only For Cables With A Ring Terminal Fastened To The End Of The Cable; Our Clamps Are Bolt On, Making Installation Easy As Long As The Ring Terminal Is There!.
Double Power: Our Innovative Design Provides Power To Both Sides Of The Jaws In The Clamp, Making Twice The Power Available When Compared To Regular Jumper Cable Clamps.
Features
- High Quality: Same amazing jumper cable battery clamps used in our heavy duty jumper cables, with 100% pure copper jaws and a 1/4" terminal connection
- Double Power: Our innovative design provides power to both sides of the jaws in the clamp, making twice the power available when compared to regular jumper cable clamps
- Tough & Durable: We don't settle for cheap, flimsy plastic we want to bring you high quality products that last a lifetime; our clamps are made from durable and rugged nylon based, glass-filled plastic that is as tough as they come
- For Terminated Cables Only: Adequate only for cables with a ring terminal fastened to the end of the cable; our clamps are bolt on, making installation easy as long as the ring terminal is there!
- Giving Power to The People: Helping people arm themselves with the right tools and accessories, Spartan Power manufactures ultra-high quality, Made in the USA products every day in Reno, Nevada; Trusted by professionals, enthusiasts, and DIYers everywhere
- See more on Amazon...
Brand: Spartan Power | Manufacturer: Spartan Power
Weight: 0.75 pounds
See On Amazon #15
Nilight NI-RS05 LED Light Bar Rocker Switch 5Pin Laser On/Off Rear Lights Rocker Switch 20A/12V 10A/24V Switch Jumper Wires Set,2 years Warranty , Blue
Asin: B06ZZHX6K3 | Model: NI-RS05 | PartNumber: NI-RS05 | Ean: 0600537016323 | UPC: 600537016323
Sturdy And Durable: Made Of High-Quality Plastic And Well-Conductive Pins; Laser-Etched Pattern, Not Easy To Fade Away.
The Package Included: 1X 5 Pin Rocker Switch, 1X Jumper Wires Set, 1X Diagrams.
Fit Type: Universal Fit.
Wide Application: Available For Controlling Led Light Bar, Led Work Lights, Fog Lamps, Driving Lights, Headlights, Taillights, Off Road Lights, Etc.
Cool Illuminated Light: Built-In Two Premium Leds Emits Soft Light To Illuminate The Patterns, Easy For You To Find The Switch In The Dark.
Features
- Easy to install and use: 5 pin on-off rocker switch with SPST design (single pole single Throw), simple installation, freely turn on or off the light
- Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark
- Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away
- Wide application: Available for controlling LED light bar, LED work lights, fog lamps, driving lights, headlights, taillights, off road lights, etc
- The package included: 1X 5 pin rocker switch, 1X jumper wires set, 1X diagrams
- Fit type: Universal Fit
- See more on Amazon...
First Available: 06/02/2017
Brand: Nilight | Manufacturer: Nilight
Dimensions: 1.00 x 2.00 x 1.00 Inches | Weight: 0.01 pounds
See On Amazon #16
Nilight 90005B Momentary Laser Rocker Switch 7Pin Winch in Winch Wiring Harness Kit 20A/12V 10A/24V Switch Jumper Wires Set,2 Years Warranty , Blue
Asin: B06ZZJ37XR | Model: 90005B-A | PartNumber: 90005B-A | Ean: 0600537016330 | UPC: 600537016330
Sturdy And Durable: Made Of High-Quality Plastic And Well-Conductive Pins; Laser-Etched Pattern, Not Easy To Fade Away..
Wide Application: Available For Controlling Led Light Bar, Led Work Lights, Fog Lamps, Driving Lights, Headlights, Taillights, Off Road Lights, Etc..
Cool Illuminated Light: Built-In Two Premium Leds Emits Soft Light To Illuminate The Patterns, Easy For You To Find The Switch In The Dark..
Features
- Easy to install and use: 7 pin on-off rocker switch with DPDT design (double pole double Throw), simple installation, can control 2 circuits.
- Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark.
- Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away.
- Wide application: Available for controlling LED light bar, LED work lights, fog lamps, driving lights, headlights, taillights, off road lights, etc.
- See more on Amazon...
First Available: 06/05/2017
Brand: Nilight | Manufacturer: Nilight
Dimensions: 1.00 x 2.00 x 1.00 Inches | Weight: 0.00 pounds
Warranty: 2 Years Warranty
See On Amazon #17
SINGARO Car Battery Terminal Connector, Pure Copper Cable End Top Post Clip Positive and Negative Pole, Applicable to Automobile, Truck, RV and Yacht Accessories
Asin: B0BS6BHQ57 | Model: SINGARO-GVSC | PartNumber: SINGARO-GVSC
Universal Fit: 19Mm Cone/Tapering Positive & 17Mm Cone/Tapering Negative. Please Be Sure To Connect Correct Terminal To Correct Polarity..
After Sales: If You Have Any Issues, Questions Or Concerns Please Reach Out To Us. We Are Standing By To Assist You With Any Issues..
You Will Get: Accessories Includes 2 Insulation Sleeves, 4 Terminal Block, 2 Battery Anti-Corrosion Washers..
Widely Applicable: Our Battery Terminal Connectors Compatible With Cars, Vans, Trucks, Rv, Yacht And More..
Features
- Sturdy & Durable: Made of pure copper with good electrical conductivity and corrosion resistance, easily replace your battery's terminal ends.
- Widely Applicable: Our battery terminal connectors compatible with cars, vans, trucks, rv, yacht and more.
- Universal Fit: 19mm cone/tapering positive & 17mm cone/tapering negative. Please be sure to connect correct terminal to correct polarity.
- You Will Get: Accessories includes 2 insulation sleeves, 4 Terminal block, 2 battery anti-corrosion washers.
- After Sales: If you have any issues, questions or concerns please reach out to us. We are standing by to assist you with any issues.
- See more on Amazon...
Brand: SINGARO | Manufacturer: SINGARO
See On Amazon #18
Nilight Copper LED Light Bar Wiring Harness Kit - 1 Lead 12AWG Heavy Duty 12V On Off Switch Power Relay Blade Fuse for Off Road LED Work Light,2 Years Warranty
Asin: B0948Y4SDT | Model: 10043W | PartNumber: 10043W | Ean: 0727196414670 | UPC: 727196414670
Circuit Protection Power Relay-Safety Protection And Conversion Circuit Blade Fuse Protects The Circuit When Overcurrent Or Short Circuit Occurs.
Package Include: 1 X 10 Feet Wiring Harness, 1 X Instructions.
Wide Application: Suitable For Almost All 12V Battery Vehicles, Such As Jeeps, Atvs, Utvs, Cars, Motorcycles, Ships, Yachts And Trailers.
Illuminated Switch 3 Pin On/Off Rocker Switch With Red Indicator Light When Truing On Easy To Turn On Or Off Has Been Passed Test Of 5 000 Times Pressing.
Features
- 10 feet harness: 10ft heavy-duty harness, 12AWG stranded wire, up to 450W load capacity, the length from relay to switch is extendable
- Illuminated Switch 3 pin on/off rocker switch with red indicator light when truing on easy to turn on or off has been passed test of 5 000 times pressing
- Circuit Protection Power relay-safety protection and conversion circuit Blade fuse protects the circuit when overcurrent or short circuit occurs
- Wide application: suitable for almost all 12V battery vehicles, such as jeeps, ATVs, UTVs, cars, motorcycles, ships, yachts and trailers
- Package include: 1 x 10 feet wiring harness, 1 x instructions
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon #19
MILAPEAK 10pcs (5 Sets) 12 Positions Dual Row 600V 15A Screw Terminal Strip Blocks with Cover + 400V 15A 12 Positions Pre-Insulated Terminals Barrier Strip (Black & Red)
Asin: B07CLW5FPS | Model: MP-T003-04-071 | PartNumber: MP-T003-04-071
★【Protect Cover】- Our Dual Row Screw Terminal Strips That Also Include A Clear Cover To Protect Accidental Touching Of The Terminal. It Will Be More Safer When The Terminals Are Protected By Snap-In Plastic "Lids". Be Careful When Mounting These Covers..
★【What You Get】- 5 X 600V 15A 12 Positions Dual Row Screw Terminal Strips, 5 X 400V 15A 12 Positions Pre-Insulated Barrier Strips (Red: 2, Black: 3), Our Worry-Free 12-Month And Friendly Customer Service. Also Available 12 Gauge,14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge High Performance Silicone Wire In Our Store..
★【Easy Install】- The Terminal Strips Are Easy To Install And Held In Place By Two Screw Holes At Either End Of The Terminal. Standard Spade Crimp Type Connectors Work Well And You Have The Option Of Of Making 12 Individual Connections Or By Using The Whole Barrier Bar Or Part Of It Up To 12 Connections To A Single Line. Once The Connections Have Been Made, Clear Plastic Covers Are Included That Push Lock Into Place To Protect The Terminals..
★【Heavy Duty】- Our Terminal/Barrier Strips Are Well Made Sturdy And With Quality And Robust Screws. You Can Crank Down On These For A Firm Bite. These Allowed You To Connect Each Power Wire Very Cleanly To Each Source (Ground, Battery, And Ignition On). Great For Compact Wiring Jobs..
Features
- Clean Installation - How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.
- Heavy Duty - Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.
- Protect Cover - Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic lids. Be careful when mounting these covers.
- Easy Install - The terminal strips are easy to install and held in place by two screw holes at either end of the terminal. Standard spade crimp type connectors work well and you have the option of of making 12 individual connections or by using the whole barrier bar or part of it up to 12 connections to a single line. Once the connections have been made, clear plastic covers are included that push lock into place to protect the terminals.
- What You Get - 5 x 600V 15A 12 Positions Dual Row Screw Terminal Strips, 5 x 400V 15A 12 Positions Pre-Insulated Barrier Strips (Red: 2, Black: 3), our worry-free 12-month and friendly customer service. Also available 12 gauge,14 gauge, 16 gauge, 18 gauge, 20 gauge High Performance Silicone Wire in our store.
- See more on Amazon...
Brand: MILAPEAK | Manufacturer: MILAPEAK
Dimensions: 0.63 x 5.91 x 4.41 Inches
See On Amazon #20
4 Post Power Distribution Block Bus Bar with Cover - Made in The USA - 250 Amp Rating - Marine, Automotive, and Solar Wiring - Set of 2 (5/16")
Asin: B07THLYYH3
Anti-Corrosive & Even Consistent Flow - Our Bus Bars 12V Are Anti-Corrosive And Constructed To Handle High Currents. The Nickel-Plated Brass Contact Plate Ensures Even And Consistent Flow And Stability.
Secure And Safe Connections - With Each Bus Bar You Can Safely Wire Up To 4 Accessories. Each Marine-Quality Bus Bar Terminal Block Includes A Cover To Protect Connections From Damage And Corrosion.
Keep Your Wires Neatly Organized - With These Power Distribution Blocks, You Can Finally Organize Your Wiring, So It Doesn't Look Like A Rat’S Nest Under The Hood Anymore. Each Power Distribution Bar Measures A Little More Than 6.5" End To End At The Base, 5.7" Wide With The Cover Attached, And Slightly More Than 2" Tall Making It Possible To Mount In Virtually Any Application.
Includes Both Red And Black Connectors - With This 2 Pack Of 4 Post Power Distribution Blocks, You Will Have Plenty Of Connection Points For Both Positive And Negative Wiring Terminals With 5/16" Holes. The 4-Way Bus Wiring Block Will Make Setting Up Your Electrical Systems Quick, Neat, And Easy.
Features
- Ideal for Automotive, Solar and Marine Use - Our 250 AMP 4-post power distribution block busbar is ideal for automotive, car audio, solar, and marine use. Whether you need to consolidate, distribute, or protect your electrical system, our bus bars are excellent for managing wires and distributing power
- Includes Both Red and Black Connectors - With this 2 pack of 4 post power distribution blocks, you will have plenty of connection points for both positive and negative wiring terminals with 5/16 holes. The 4-way bus wiring block will make setting up your electrical systems quick, neat, and easy
- Anti-Corrosive & Even Consistent Flow - Our bus bars 12v are anti-corrosive and constructed to handle high currents. The nickel-plated brass contact plate ensures even and consistent flow and stability
- Keep Your Wires Neatly Organized - With these power distribution blocks, you can finally organize your wiring, so it doesn't look like a rat s nest under the hood anymore. Each power distribution bar measures a little more than 6.5 end to end at the base, 5.7 wide with the cover attached, and slightly more than 2 tall making it possible to mount in virtually any application
- Secure and Safe Connections - With each bus bar you can safely wire up to 4 accessories. Each marine-quality bus bar terminal block includes a cover to protect connections from damage and corrosion
- See more on Amazon...
Brand: R2X Racing | Manufacturer: R2X Racing
See On Amazon
Looking For Something Else?
Search