4pcs Front Rear Drive Shaft Upgrades Part for Arrma 1/7 Mojave 6S BLX,ARRCat Harden Metal #45 CVD Drive Shaft Hop-up Parts,RC Heavy Duty Driveshaft for Arrma 1/7 Mojave 6S BLX (More Power 2022) Black
Asin: B09V7FZNHX
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.🔥【Upgrade To Greater Strength】: The Cvd Drive Shaft Made From Harden Steel #45 For Greater Strength And Stable Driving Performance.Tough Steel For Long-Lasting Durability And Low Wear..
💖【Arrcat Guarantee】If You Are Not 100% Completely Satisfied With Our Products, Please Do Not Hesitate To Contact Us To Request A Refund Or Exchange! Your Satisfaction Is Our Main Priority..
🔥【Strength And Precision】: The Dogbone Is With More Turning Power And More Sturdy Use ,High Reliability, Ensuring Smooth Transmission.The Rc Car Upgrades Parts Highly Increase The Strength And Precision..
🔥【Upgrade To More Power】: The Dogbone Is With More Turning Power And More Sturdy Use ,As Its Diameter Of Dogbone Increase From 5Mm (Original) To 6Mm..
Features
- Compatible With : The Front Rear Driveshaft fits for Armma 1/7 4WD MOJAVE 6S Desert Truck (ARA106058T1/T2).Original stock part number : ARA310954 + AR310452 + AR310451 + ARA310953 + AR310431.
- Upgrade to More Power : The dogbone is with more turning power and more sturdy use ,as its diameter of dogbone increase from 5mm (original) to 6mm.
- Upgrade to Greater Strength : The CVD drive shaft made from harden steel #45 for greater strength and stable driving performance.Tough steel for long-lasting durability and low wear.
- Strength and Precision : The dogbone is with more turning power and more sturdy use ,High reliability, ensuring smooth transmission.The rc car upgrades parts highly increase the strength and precision.
- ARRCat Guarantee If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange! Your Satisfaction is Our Main Priority.
- See more on Amazon...
Brand: ARRCat | Manufacturer: ARRCat
See On Amazon Similar To 4pcs Front Rear Drive Shaft
#1
LivTee Rustproof License Plate Screws for Securing License Plates Frames and Covers on Cars and Trucks, 4 Sets Premium Stainless Steel Self Tapping Mounting Bolts (Black Zinc Plated)
Asin: B0972S4R8L | Model: LivTee-PLP-5050-1W | PartNumber: LivTee-PLP-5050-1W
Easy Installation: Easy Installation With Simple Screwdriver. No Rattle, Tighten With Foam Pad, Keep Your License Away From Vibration Noise During Driving..
Enjoy Warranty: You Will Get Quality Products, If You Have Any Questions, Please Contact Us, We Are Always Waiting For You Here..
In Standard Size: 1/4-3/4" With 3/8" Steel And Black Zinc Plated For A Durable Finish That Is Guaranteed To Never Tarnish, Which Fits Most Domestic Cars And Trucks..
What You Get: Premium Stainless Steel Screws--4Pcs, Foam Pad--4Pcs, Screw Washers--4Pcs, Screw Covers--4Pcs, Nylon Screw Inserts(Optional)--4Pcs..
Features
- Super Clean and Professional Look: Use the 4 included black screw covers for an even cleaner looking license plate. Maximum compatibility, enjoy noise-free license plates.
- What You Get: Premium stainless steel screws--4pcs, foam pad--4pcs, screw washers--4pcs, screw covers--4pcs, nylon screw inserts(OPTIONAL)--4pcs.
- Easy Installation: Easy installation with simple screwdriver. No rattle, tighten with foam pad, keep your license away from vibration noise during driving.
- In Standard Size: 1/4-3/4 with 3/8 steel and black zinc plated for a durable finish that is guaranteed to never tarnish, which fits most domestic cars and trucks.
- Enjoy Warranty: You will get quality products, if you have any questions, please contact us, we are always waiting for you here.
- See more on Amazon...
Brand: LivTee | Manufacturer: LivTee
See On Amazon #2
SINGARO Car Door Threshold Protection, 4PCS Door Edge Step Dust Shield Cover, Door Width 23.6x2.36inch Car/SUV Universal Rubber Scratch Resistant Exterior Accessories (Black)
Asin: B0CBV23LBW
Product Size: The Package Includes 2 Front Door Devices Of 23.6X2.36Inch And 2 Rear Door Devices Of 15.7X2.36Inch, Suitable For Most Sedan/Suv Models..
Buy With Confidence: If You Have Any Questions, Please Contact Us, We Are Always Here To Satisfy You All..
Easy To Install: After Cleaning The Installation Location, It Can Be Installed Privately Without Drilling Or Welding..
Excellent Performance: Anti-Scratch, Abrasion Resistance, Anti-Aging, Groove Anti-Skid Design, Effectively Prevent Items From Falling, And Provide Protection For Scratches..
Features
- High-quality material: High-quality soft and environmentally friendly material, reducing external impact, durable and scratch-resistant, flexible and flexible, and full of toughness.
- Excellent performance: Anti-scratch, abrasion resistance, anti-aging, groove anti-skid design, effectively prevent items from falling, and provide protection for scratches.
- Product size: The package includes 2 front door devices of 23.6x2.36inch and 2 rear door devices of 15.7x2.36inch, suitable for most sedan/SUV models.
- Easy to install: After cleaning the installation location, it can be installed privately without drilling or welding.
- Buy with confidence: If you have any questions, please contact us, we are always here to satisfy you all.
- See more on Amazon...
Brand: SINGARO | Manufacturer: SINGARO
Dimensions: 0.04 x 23.60 x 2.36 inches
See On Amazon #3
12pcs Differential Transfer Case Crush Washer Gasket Kit Compatible with Toyota Lexus Scion 4Runner Land Cruiser Tundra Tacoma FJ Cruiser Highlander RAV4 Sienna 9043024003, 1215710010, 90430A0003
Asin: B0C4T3K4B9
2Pcs Copper Washer I.D. : 24 Mm O.D. : 32 Mm Nominal Size : M24*M32, Thickness : 1 Mm, Compatible With Toyota Lexus 9043024017, 90430-24017, 9043024003, 90430-24003..
Worked Perfect: Meet Or Exceed Oem Specification Boast A Much Longer Lasting Sealing Capabilities..
4Pcs Aluminum Oil Drain Plug Gasket, 90430-A0003 Aluminum Washers For Transfer Case 18Mm Aluminum Crush Washer.
6Pcs Steel Crushable Oil Drain Plug Gasket, Replaces Toyota Lexus 1215710010 ,12157-10010, 9043018134, 90430-18134. Size M18*M24, 18.2Mm I.D., 24.2Mm O.D., 2.50Mm Thickness.
Features
- Compatible With Toyota Lexus Scion Transfer Case And Differential Service Transfer & Differential Service Gasket Kit
- 6pcs Steel Crushable Oil Drain Plug Gasket, Replaces Toyota Lexus 1215710010 ,12157-10010, 9043018134, 90430-18134. Size M18*M24, 18.2mm I.D., 24.2mm O.D., 2.50mm Thickness
- 2pcs copper washer I.D. : 24 mm O.D. : 32 mm Nominal Size : M24*M32, Thickness : 1 mm, Compatible with Toyota Lexus 9043024017, 90430-24017, 9043024003, 90430-24003.
- 4pcs Aluminum Oil Drain Plug Gasket, 90430-A0003 aluminum washers for transfer case 18mm Aluminum Crush Washer
- Worked Perfect: Meet or Exceed OEM Specification boast a much longer lasting sealing capabilities.
- See more on Amazon...
Brand: TOPCNOEM | Manufacturer: TOPCNOEM
See On Amazon #4
4PCS Car Windshield Wiper Blade Strips, DIY Silicone Car Frameless Window Boneless Replacement, Auto Adjustable Insert Rubber Wiper Blade Refills, Universal for SUV Truck Van
Asin: B0BP6WGNLX | Model: Wiper Blade Strip | PartNumber: Wiper Blade Strip
【Clear Vision】: This Boneless Wiper Strip Can Give You A Clean View And Help You Stop Stressing Or Having Unnecessary Accidents When Driving In The Rain. No Matter How Bad The Situation Is, You Can See The Clear Road In Front Of You For A Long Time, Away From The Blur And Danger. At The Same Time They Have A Very Good Scrubbing Durability To Ensure That You Can Use It For A Long Time..
【Universal Design】: These Silicone Wiper Blade Fillers Are Suitable For Frameless Wipers On Cars, Universal For Most Cars, Buses, Vans, Trucks. Installation To The Time Only Need A Little Easy And Simple Change, Disassembly Quick Removal, Easy To Clean, Made Of High Quality Rubber, Soft And Flexible, Corrosion Resistant, Dust Resistant, Can Be Applied To Very Low Temperature Conditions Of High Temperature, No Longer Need To Worry About The Bad Weather..
【Great Performance】: Good Wiper Performance Under The Harsh Conditions Of -40 To -60 Degrees Has Very Good Weather Resistance, Can Uv, Light, Frost, Etc. In Bending 90 Degrees Placed In Any Outdoor Environment, A Year Will Not Have Crack Lines. Reduce The Coefficient Of Friction In The Harsh Conditions Of The Friction Is Also Stable. Has A Very Good Quiet Performance, To Create A Quiet, Elegant Driving Environment For You..
【Diy Adjustable】: This Boneless Wiper Strip Is Very Long, A Full 32 Inches, Large Enough To Meet Your Daily Replacement Needs, You Can Diy Cut According To The Length You Need, You Can Cut Them To Any Size, According To Your Own Heart Cut Them To Match Your Car To Fit Your Wipers. Easy And Simple To Install And Replace, Quick To Remove, Long Lasting And Money Saving. It Is A Great Replacement For Old Rubber Wiper Blade Refills..
Features
- Upgrade Material : Our upgrade version windshield wiper blade refill is made of natural rubber, compared to ordinary rubber strip, rough workmanship of its raw materials are generally made of recycled rubber can not withstand exposure to the sun, the sun will be white cracking. Natural rubber flexibility, perfect fit glass, smooth surface texture, anti-aging surface coating spraying, fine workmanship.
- DIY Adjustable : This boneless wiper strip is very long, a full 32 inches, large enough to meet your daily replacement needs, you can DIY cut according to the length you need, you can cut them to any size, according to your own heart cut them to match your car to fit your wipers. Easy and simple to install and replace, quick to remove, long lasting and money saving. It is a great replacement for old rubber wiper blade refills.
- Clear Vision : This boneless wiper strip can give you a clean view and help you stop stressing or having unnecessary accidents when driving in the rain. No matter how bad the situation is, you can see the clear road in front of you for a long time, away from the blur and danger. At the same time they have a very good scrubbing durability to ensure that you can use it for a long time.
- Great Performance : Good wiper performance under the harsh conditions of -40 to -60 degrees Has very good weather resistance, can UV, light, frost, etc. in bending 90 degrees placed in any outdoor environment, a year will not have crack lines. Reduce the coefficient of friction in the harsh conditions of the friction is also stable. Has a very good quiet performance, to create a quiet, elegant driving environment for you.
- Universal Design : These silicone wiper blade fillers are suitable for frameless wipers on cars, universal for most cars, buses, vans, trucks. Installation to the time only need a little easy and simple change, disassembly quick removal, easy to clean, made of high quality rubber, soft and flexible, corrosion resistant, dust resistant, can be applied to very low temperature conditions of high temperature, no longer need to worry about the bad weather.
- See more on Amazon...
Brand: AICEL | Manufacturer: AICEL
Dimensions: 2.00 x 1.00 x 1.00 inches
Warranty: 0.2
See On Amazon #5
4PCS Motorcycle Turn Signals,14LED Front & Rear Motorcycle Blinkers with Cool Amber Lamp,Universal 12V Motorcycle Turn Signal Light Compatible with Yamaha Kawasaki Motorcycle Accessories
Asin: B0C8YSV85B | Model: motorcycle turn signals | PartNumber: motorcycle turn signals
⭐ 【Turn Signal Specifications】 The Voltage Of The Motorcycle Turn Signal Lights Is 12V, The Power Is 2W, The Color Temperature Is 3500K, And The Service Life Is 50000H. Each Of Our Scooter Turn Signal Lights Housings Is Made Of Premium Abs, With A Waterproof Rating Of Up To Ip67, Which Can Withstand Various Adverse Weather Conditions..
⭐ 【Perfect After-Sales Service】 We Care About Our Valued Buyers, And Each Of Our Motorcycle Lights Is Carefully Tested And Inspected Before Delivery. If You Have Any Questions About The Performance Or Installation Of The Product, Our Customer Service Personnel Will Be Happy To Assist You..
⭐ 【How To Install】 The Installation Of Motorcycle Turn Signal Lights Are Very Simple And Can Be Easily Completed In A Few Minutes. You Only Need To Use The Bolt Assembly To Secure The Turn Signal To Use. When Connecting Cables, Please Pay Attention To Connecting The Black Cable To The Negative Pole And The Yellow Cable To The Positive Pole..
⭐ 【Widely Compatible】 Motorcycle Blinkers Are Suitable For Most 12V Motorcycles, Scooters, And Dirt Bike With 10Mm Mounting Holes. It Is Compatible With 2003-2019 Cbr600rr, 2004-2019 Cbr1000rr; Yamaha 2006 Yzf-R6s, 1998-2019 Yzf-R1; Kawasaki 2004-2017 Zx1000; Suzuki 1992-2019 Gsx-R600, 2001-2017 Gsx-R1000. (Including But Not Limited To The Above Models.).
Features
- Super Bright Amber Lamp This motorcycle turn signals has 14 super bright LED lights built-in, and the lights present a brilliant amber color, making it very suitable for handsome motorcycle modification. The appearance of the motorcycle turn signals LED adopts a mini arrow design, resembling two flashing small eyes, providing guarantee for your safe driving.
- Widely Compatible Motorcycle blinkers are suitable for most 12V motorcycles, scooters, and dirt bike with 10mm mounting holes. It is compatible with 2003-2019 CBR600RR, 2004-2019 CBR1000RR; Yamaha 2006 YZF-R6S, 1998-2019 YZF-R1; Kawasaki 2004-2017 ZX1000; Suzuki 1992-2019 GSX-R600, 2001-2017 GSX-R1000. (Including but not limited to the above models.)
- Turn signal Specifications The voltage of the motorcycle turn signal lights is 12V, the power is 2W, the color temperature is 3500K, and the service life is 50000H. Each of our scooter turn signal lights housings is made of premium ABS, with a waterproof rating of up to IP67, which can withstand various adverse weather conditions.
- How to Install The installation of motorcycle turn signal lights are very simple and can be easily completed in a few minutes. You only need to use the bolt assembly to secure the turn signal to use. When connecting cables, please pay attention to connecting the black cable to the negative pole and the yellow cable to the positive pole.
- Perfect After-Sales Service We care about our valued buyers, and each of our motorcycle lights is carefully tested and inspected before delivery. If you have any questions about the performance or installation of the product, our customer service personnel will be happy to assist you.
- See more on Amazon...
Brand: IHOTDER | Manufacturer: ihotder
Dimensions: 1.08 x 3.44 x 1.11 inches | Weight: 0.24 Pounds
Warranty: Warranty within 6 months
See On Amazon #6
SINGARO Car Exterior Accessories Rear View Mirror Stickers Decor Car Body Sticker Vinyl 4pcs (Black)
Asin: B09FJNZC95 | Model: SINGARO-GVSC | PartNumber: SINGARO-GVSC
Note: When Pasting, First Remove The Bottom Film, Then Paste It, And Check The Sticker. Finally Tear Off The Top Layer Membrane Transparent. Please Have The Surface Complete Clean And Dry First Before Applying This..
Enjoy Warranty: You Will Get Quality Products, If You Have Any Questions, Please Contact Us, We Are Always Waiting For You Here..
Size: 7.87Inch X 1.96Inch. The Package Includes 4* Rearview Mirror Car Stickers..
Application: Car Rear View Mirror, Car Body, Bumper. Reflective Material Pet, Can Produce Reflection Effect Under Light. This Sticker Will Make Your Car Look More Stylish And Personalized..
Features
- Special Note: The reflective effect after night illumination is not only attractive, but also a warning for other vehicles. You will need it.
- Application: Car rear view mirror, car body, bumper. Reflective material PET, can produce reflection effect under light. This sticker will make your car look more stylish and personalized.
- Note: When pasting, first remove the bottom film, then paste it, and check the sticker. Finally tear off the top layer membrane transparent. Please have the surface complete clean and dry first before applying this.
- Size: 7.87inch x 1.96inch. The package includes 4* rearview mirror car stickers.
- Enjoy Warranty: You will get quality products, if you have any questions, please contact us, we are always waiting for you here.
- See more on Amazon...
Brand: SINGARO | Manufacturer: SINGARO
Dimensions: 0.10 x 0.30 x 0.20 inches
See On Amazon #7
8PCS Brake Disc Rotor Screws Kit for Front Rotors and Brake Pads,Stainless Steel Screws for Brake System,OEM#936-000-601-40-H Compatible with Honda Accord Civic Acura CL (8PCS)
Asin: B0CTHLT8MW | Model: Brake Disc Rotor Screws | PartNumber: Brake Disc Rotor Screws
🚘 Compatible With Acura - The Brake Rotor Screw Compatible With Honda Acura Cl 1997-2003, Ilx 2013-2018, Ilx Hybrid 2013-2014, Integra 1986-2001, Legend 1986-1995, Mdx 2001-2018, Nsx 1991-2018, Rdx 2007-2018, Rl1996-2012, Rlx 2014-2018, Rsx 2002-2006, Tl 1995-2014, Tlx 2015-2018, Tsx 2004-2014 And More. Please Refer To Product Description For More!.
🚘 Easy Installation - Using The Tool You Can Easily Install Or Remove These Brake Discs With The Small Set Screws To The Mounting Points Without Complicated Steps. If The Original Screws Are Rusty, You Can Spray Some Lubricant Onto The Screws And They Will Unscrew Easily, Be Careful Not To Spray On The Brake Discs..
🚘 Rustproof And Strong - Our Auto Part Is Made Of High Hardness Stainless Steel, And The Surface Has Been Rust-Proofed And Specially Coated, The Car Brake Disc Rotor Set Screws Have Superior Anti-Aging Properties, Prolonging The Service Life And Reducing The Frequency Of Replacement, Saving Your Time And Money..
🚘 Compatible With Honda - The Rotor Screws Compatible With Honda Accord 1985-2018, Civic 1980-2018, Crosstour 2010-2015, Clarity 2017-2018, Cr-V 1997-2018, Crx 1984-1991, Cr-Z 2011-2016, Del Sol 1993-1997, Element 2003-2011, Fit 2007-2018, Ev 2013-2014, Hr-V2016-2018, Insight 2010-2014 And More. Please Refer To Product Description For More!.
Features
- Buyer's Guide - We have different number of kits (4pcs/8pcs/12pcs screws) that you can choose according to your daily needs. Replacement OEM#936-000-601-40-H, 93600060140h. This brake disc set screw measures 0.54x0.42x0.42 inches, please check your car model and size when placing an order to avoid buying the wrong one!
- Compatible with Honda - The rotor screws compatible with Honda Accord 1985-2018, Civic 1980-2018, Crosstour 2010-2015, Clarity 2017-2018, CR-V 1997-2018, CRX 1984-1991, CR-Z 2011-2016, Del Sol 1993-1997, Element 2003-2011, Fit 2007-2018, EV 2013-2014, HR-V2016-2018, Insight 2010-2014 and more. Please refer to product description for more!
- Compatible with Acura - The brake rotor screw compatible with Honda Acura CL 1997-2003, ILX 2013-2018, ILX Hybrid 2013-2014, Integra 1986-2001, Legend 1986-1995, MDX 2001-2018, NSX 1991-2018, RDX 2007-2018, RL1996-2012, RLX 2014-2018, RSX 2002-2006, TL 1995-2014, TLX 2015-2018, TSX 2004-2014 and more. Please refer to product description for more!
- Rustproof and Strong - Our auto part is made of high hardness stainless steel, and the surface has been rust-proofed and specially coated, the car brake disc rotor set screws have superior anti-aging properties, prolonging the service life and reducing the frequency of replacement, saving your time and money.
- Easy Installation - Using the tool you can easily install or remove these brake discs with the small set screws to the mounting points without complicated steps. If the original screws are rusty, you can spray some lubricant onto the screws and they will unscrew easily, be careful not to spray on the brake discs.
- See more on Amazon...
Brand: Stacool | Manufacturer: Stacool
Dimensions: 0.42 x 0.54 x 0.42 inches
Warranty: Warranty Within 3 Months
See On Amazon #8
Frienda Deer Whistle 10 Pieces Save a Deer Whistles Avoids Collisions, Deer Whistles for Car Deer Warning Devices Animal Alert for Cars and Motorcycles (Black)
Asin: B07YCLJ6LM | Model: Frienda-Deer Whistle-03 | PartNumber: Frienda-Deer Whistle-03 | Ean: 0760385140158 | UPC: 760385140158
East To Install And Remove: Just Remove The Adhesive Backing And Apply The Whistles To The Grill, Front Bumper, Rear View Mirror, Or Any Flat Place Of Your Vehicle; Make Sure The Bigger Ends Are Facing The Front, And The Deer Whistle Is Level With The Horizon; The Ideal Place Is Where The Air Flows Most, Followed By Grill, Front Bumper, They Can Be Easily Removed From The Base When Car Washing Is Needed.
International Products Have Separate Terms, Are Sold From Abroad And May Differ From Local Products, Including Fit, Age Ratings, And Language Of Product, Labeling Or Instructions..
Safe Accessory For Driver: The Deer Warning Device Is A Necessary Car Accessory For Driver Who Live In A Wild Area; The Whistle Produces Ultrasonic Frequencies And Make Warning Sound, Thereby Reducing Vehicle Collisions.
Safe For You And Your Pet: The Deer Whistles For Vehicles Is Equipped With 10 Whistles, 5 Of Them Produce Sound Waves, The Others Produce Ultrasound; However, People And Pets (Such As Dogs, Cats) In The Car Can't Hear It, So There's No Damage To Your Ears Or Health.
Features
- Helpful tool: air moving through the deer whistle will produce sound/ ultrasound, this kind of sound can alert deer, elk, moose, antelope and kangaroos approaching vehicles, which effectively avoid deer and vehicle collisions
- Safe for You and Your Pet: the deer whistles for vehicles is equipped with 10 whistles, 5 of them produce sound waves, the others produce ultrasound; However, people and pets (such as dogs, cats) in the car can't hear it, so there's no damage to your ears or health
- East to install and remove: just remove the adhesive backing and apply the whistles to the grill, front bumper, rear view mirror, or any flat place of your vehicle; Make sure the bigger ends are facing the front, and the deer whistle is level with the horizon; The ideal place is where the air flows most, followed by grill, front bumper, they can be easily removed from the base when car washing is needed
- Safe accessory for driver: the deer warning device is a necessary car accessory for driver who live in a wild area; The whistle produces ultrasonic frequencies and make warning sound, thereby reducing vehicle collisions
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
- See more on Amazon...
Brand: Frienda | Manufacturer: Frienda
Dimensions: 2.76 x 6.30 x 3.15 inches | Weight: 0.40 Pounds
See On Amazon #9
LivTee Super Bright 4PCS Motorcycle Indicators Flowing Turn Signal Brake Lights & Daytime Running Lights 12V for Motorbike Scooter Quad Cruiser Off Road, White/Red/Amber
Asin: B07Y8B5PB9 | Ean: 0710825806458 | UPC: 710825806458
New Features: New Version Of The Turn Signal Adds Daytime Running Lights And Brake Lights. Notice: When The Turn Signal Is On, The Daytime Running Light Or The Brake Light Will Turn Off; When The Turn Signal Is Turned Off, The Daytime Running Light Or The Brake Light Will Returns To Its Birghtness..
Buy With Confidence: The Package Contains 2Pcs Drl/Turn Signal Lights And 2Pcs Brake/ Turn Signal Lights. Any Issues Or Questions Please Feel Free To Contact Us, We Are Always Here To Satisfy All Of You..
Easy To Install: Black Wire Is Negative, Yellow Wire Is Turn Signal Light, White Wire Is Drl, Red Wire Is Brake Light, Directly Mount To The Original Turn Signal Light Place..
High Quality: Motorcycle Turn Signal Is Made Of Abs Plastic, Which Has High Transparency And Good Wear Resistance That Guaranteed By Quality; Flexible Rubber Connection Base Is Not Easy To Break, Effectively Prevent Fracture..
Features
- Compatibility: 12V 12 LED Motorcycle Flowing Turn Signals Indicator Light.
- High quality: Motorcycle turn signal is made of ABS plastic, which has high transparency and good wear resistance that guaranteed by quality; Flexible rubber connection base is not easy to break, effectively prevent fracture.
- New features: New version of the turn signal adds daytime running lights and brake lights. Notice: When the Turn Signal is on, the Daytime Running Light or the Brake Light will turn off; When the Turn Signal is Turned off, The Daytime Running Light or the Brake Light will Returns to its birghtness.
- Easy to Install: Black Wire is Negative, Yellow Wire is Turn Signal Light, White Wire is DRL, Red Wire is Brake Light, Directly Mount to the Original Turn Signal Light Place.
- Buy with confidence: The package contains 2pcs DRL/Turn Signal lights and 2pcs Brake/ Turn Signal lights. Any issues or questions please feel free to contact us, we are always here to satisfy all of you.
- See more on Amazon...
Brand: LivTee | Manufacturer: LivTee
See On Amazon #10
bylikeho 4PCS Coil Spring Spacers,Coil Spring Booster,Car Accessories Rubber Coil Spring Booster Kit,Coil Spring Spacers for Car,Rubber Coil Spacers for 1" to 1.5" Coil Spring Lift,Fits Most Cars SUVs
Asin: B0CXHRKRY9 | Model: 1444LXTHJZJ001 | PartNumber: 1444LXTHJZJ001
[Scope Of Application] The Size Of The Front Spiral Spring Gasket Is 1.85X1.54X1.22 Inches. Boosters Can Meet Two Different Height Requirements: One Provides A Lift Of 1 Inch/25.4Mm, And The Other Provides A Lift Of 1.5 Inches/38.1Mm..
[Widely Applicable] The Packaging Includes 6 Rubber Coil Spring Boosters, Suitable For Most Cars, Trucks, And Suvs..
[Easy To Install] The Spiral Spring Lifting Pad Is Easy To Install. Firstly, A Jack Can Be Used To Lift The Front End Of The Vehicle To Remove The Spring. Then Determine The Required Amount Of Lift And Insert The Booster Between The Spring Coils. Insert The Second Booster At A 45 Degree Angle With The Other Booster. Repeat The Above Steps Until Finally Ensuring That All Parts Have Appropriate Clearances. (Depending On The Vehicle Model, A Spring Compression Tool May Be Needed To Leave Enough Space Between The Coils To Insert The Rubber Pad)..
[Performance Improvement] Rubber Spiral Spring Gaskets Can Effectively Solve The Problem Of Weak Springs Under Heavy Loads. Reduce Noise And Vibration During Driving, And Improve Driving Comfort..
Features
- [High Quality Materials]The spiral spring booster is made of high-quality rubber, which is safe, stable, and not easily deformed or damaged. Durable and long-lasting.
- [Performance Improvement] Rubber spiral spring gaskets can effectively solve the problem of weak springs under heavy loads. reduce noise and vibration during driving, and improve driving comfort.
- [Scope of Application] The size of the front spiral spring gasket is 1.85x1.54x1.22 inches. Boosters can meet two different height requirements: one provides a lift of 1 inch/25.4mm, and the other provides a lift of 1.5 inches/38.1mm.
- [Easy to Install] The spiral spring lifting pad is easy to install. Firstly, a jack can be used to lift the front end of the vehicle to remove the spring. Then determine the required amount of lift and insert the booster between the spring coils. Insert the second booster at a 45 degree angle with the other booster. Repeat the above steps until finally ensuring that all parts have appropriate clearances. (Depending on the vehicle model, a spring compression tool may be needed to leave enough space between the coils to insert the rubber pad).
- [Widely Applicable] The packaging includes 6 rubber coil spring boosters, suitable for most cars, trucks, and SUVs.
- See more on Amazon...
Brand: bylikeho | Manufacturer: bylikeho
Warranty: no
See On Amazon #11
4PCS Mud Flaps for Car,Universal Flexible Front+Rear Wheel Flares Splash Guard for Protecting Body,Automotive Exterior Accessories Fender Flares for Car Truck SUV
Asin: B0CT8TQT79 | Model: Mud Flaps for Car | PartNumber: Mud Flaps for Car
🚖 Universal Size: Our Mud Flaps For Car Size Is 9.84X7.09X1.25 Inch. The Size Design Of A Universal Model Determines Its Compatibility With Many Models, Such As Cars, Trucks, Suvs, Rvs, Vans, And Off-Road Vehicles. The Packaging Contains 4X Fender Flares, 8X Screws And 8X Gasket, Which Can Meet The Installation Requirements Of Four Car Tires At The Same Time..
🚖 Easy Installation: The Installation Of Truck Mud Flaps Are Very Simple, Without The Need For Drilling. You Only Need To Determine The Installation Position First, And Then Use Screws And Gasket Components To Firmly Fix The Mud Guard Behind The Car Tires. You Can Freely Cut The Splash Guard According To The Shape Of The Car Tires..
🚖 Flexible Material: We Choose Premium Pvc As The Raw Material For These Splash Guard, Aiming To Provide You With A Quality Guarantee That Is Flexible, Sturdy, Scratch Resistant, And Not Easily Broken. The Mudguards Has Undergone Strict Polishing Treatment, With Smooth Edges That Will Not Scratch Your Car Paint..
Features
- Prevent Soil Splashing: Don't let the splashed soil cover your gorgeous car body! This not only affects the aesthetics of the car, but also affects your driving experience! Let these practical mud flaps become a strong shield for your beloved car! It can greatly prevent soil from splashing onto car tires and body. Keep your car always in a clean appearance!
- Flexible Material: We choose premium PVC as the raw material for these splash guard, aiming to provide you with a quality guarantee that is flexible, sturdy, scratch resistant, and not easily broken. The mudguards has undergone strict polishing treatment, with smooth edges that will not scratch your car paint.
- Universal Size: Our mud flaps for car size is 9.84x7.09x1.25 inch. The size design of a universal model determines its compatibility with many models, such as cars, trucks, SUVs, RVs, vans, and off-road vehicles. The packaging contains 4x fender flares, 8x screws and 8x gasket, which can meet the installation requirements of four car tires at the same time.
- Easy Installation: The installation of truck mud flaps are very simple, without the need for drilling. You only need to determine the installation position first, and then use screws and gasket components to firmly fix the mud guard behind the car tires. You can freely cut the splash guard according to the shape of the car tires.
- See more on Amazon...
Brand: Stacool | Manufacturer: Stacool
Dimensions: 1.25 x 9.84 x 7.09 inches | Weight: 0.63 pounds
Warranty: Warranty Within 3 Months
See On Amazon #12
Detroit Axle - 4WD Front 4pc Ball Joints for Ford F-250 F-350 F-450 F-550 Excursion, 4 Upper & Lower Ball Joints Replacement
Asin: B07ZN9KSWB
Kit Includes: (2) Front Upper Ball Joints And (2) Front Lower Ball Joints.
10-Year Warranty.
Detroit Axle Suspension Parts Are Ready To Meet The Rigorous Demands Of Today’S Foreign And Domestic Passenger Cars, Trucks And Suvs.
Front Ball Joints Replacement For 2000-2005 Ford Excursion (All 4Wd Models) - [1992-1997 Ford F-250 (All 4Wd Models ; Dana 60 Axle)] - 1999-2016 Ford F-250 Super Duty (All 4Wd Models) - [1992-1997 Ford F-350 (All 4Wd Models)] - 1999-2016 Ford F-350 Super Duty (All 4Wd Models) - [1999-2004 Ford F-450 Super Duty (All 4Wd Models)] - 1999-2004 Ford F-550 Super Duty (All 4Wd Models).
Features
- For 4WD Models Only
- Front Ball Joints Replacement for 2000-2005 Ford Excursion (All 4WD Models) - [1992-1997 Ford F-250 (All 4WD Models ; Dana 60 Axle)] - 1999-2016 Ford F-250 Super Duty (All 4WD Models) - [1992-1997 Ford F-350 (All 4WD Models)] - 1999-2016 Ford F-350 Super Duty (All 4WD Models) - [1999-2004 Ford F-450 Super Duty (All 4WD Models)] - 1999-2004 Ford F-550 Super Duty (All 4WD Models)
- Kit Includes: (2) Front Upper Ball Joints and (2) Front Lower Ball Joints
- Detroit Axle Suspension parts are ready to meet the rigorous demands of today s foreign and domestic passenger cars, trucks and SUVs
- 10-Year Warranty
- See more on Amazon...
Brand: Detroit Axle | Manufacturer: Detroit Axle
Dimensions: 2.00 x 8.00 x 6.00 inches | Weight: 6.47 pounds
See On Amazon #13
4PCS Motorcycle Turn Signals - 14LED 12V Bright Amber Lamp Motorcycle Blinkers - Front/Rear Universal Motorcycle Turn Signal Light Compatible with Yamaha Kawasaki Honda
Asin: B0CGV7DCCJ | Model: Motorcycle Turn Signals | PartNumber: Motorcycle Turn Signals
✨【Turn Signal Specifications】 The Voltage Of The Motorcycle Turn Signal Lights Is 12V, The Power Is 2W, The Color Temperature Is 3500K, And The Service Life Is 50000H. Each Of Our Scooter Turn Signal Lights Housings Is Made Of Premium Abs And Acrylic, With A Waterproof Rating Of Up To Ip67, Which Can Withstand Various Adverse Weather Conditions..
✨【Perfect After-Sales Service】 We Care About Our Valued Buyers, And Each Of Our Motorcycle Lights Is Carefully Tested And Inspected Before Delivery. If You Have Any Questions About The Performance Or Installation Of The Product, Our Customer Service Personnel Will Be Happy To Assist You. If The Item Is Defective Within 1 Month, You Can Return It To Us. Enjoy Your Shopping!.
✨【How To Install】 The Installation Of Motorcycle Turn Signal Lights Are Very Simple And Can Be Easily Completed In A Few Minutes. You Only Need To Use The Bolt Assembly To Secure The Turn Signal To Use. When Connecting Cables, Please Pay Attention To Connecting The Black Cable To The Negative Pole And The Yellow Cable To The Positive Pole..
✨【Super Bright Amber Lamp】 This Motorcycle Turn Signals Has 14 Super Bright Led Lights Built-In, And The Lights Present A Brilliant Amber Color, Making It Very Suitable For Handsome Motorcycle Modification. The Appearance Of The Motorcycle Turn Signals Led Adopts A Mini Arrow Design, Resembling Two Flashing Small Eyes, Providing Guarantee For Your Safe Driving..
Features
- Widely Compatible Motorcycle blinkers are suitable for most 12V motorcycles, scooters, and dirt bike with 10mm mounting holes. It is compatible with Honda 2003-2019 CBR600RR, 2004-2019 CBR1000RR; Yamaha 2006 YZF-R6S, 1998-2019 YZF-R1; Kawasaki 2004-2017 ZX1000; Suzuki 1992-2019 GSX-R600, 2001-2017 GSX-R1000. (Including but not limited to the above models)
- Super Bright Amber Lamp This motorcycle turn signals has 14 super bright LED lights built-in, and the lights present a brilliant amber color, making it very suitable for handsome motorcycle modification. The appearance of the motorcycle turn signals LED adopts a mini arrow design, resembling two flashing small eyes, providing guarantee for your safe driving.
- Turn Signal Specifications The voltage of the motorcycle turn signal lights is 12V, the power is 2W, the color temperature is 3500K, and the service life is 50000H. Each of our scooter turn signal lights housings is made of premium ABS and acrylic, with a waterproof rating of up to IP67, which can withstand various adverse weather conditions.
- How to Install The installation of motorcycle turn signal lights are very simple and can be easily completed in a few minutes. You only need to use the bolt assembly to secure the turn signal to use. When connecting cables, please pay attention to connecting the black cable to the negative pole and the yellow cable to the positive pole.
- Perfect After-Sales Service We care about our valued buyers, and each of our motorcycle lights is carefully tested and inspected before delivery. If you have any questions about the performance or installation of the product, our customer service personnel will be happy to assist you. If the item is defective within 1 month, you can return it to us. Enjoy your shopping!
- See more on Amazon...
Brand: carleef | Manufacturer: Carleef
Dimensions: 1.08 x 3.44 x 1.11 inches
Warranty: Warranty within 6 months
See On Amazon #14
4PCS Car Door Sill Protector and 1PCS Rear Bumper Guard, Carbon Fiber Anti-Scratch Cover Strips, Trunk Door Entry Edge Protection Sticker, Auto Accessories Universal for Most Vehicles
Asin: B0BLC4V2VP | Model: Car Door Sill Protector | PartNumber: Car Door Sill Protector
【Easy To Install & Remove】: The Installation Of The Door Sill Protector Guards Is Very Quick And Easy. All You Need To Do Is Clean The Target Location, Wait For It To Dry Completely, Peel Off The Protective Film And Apply The Door Sill Strip. Pressing Hard For A Few Seconds Will Make It More Solid. Please Rest Assured That It Will Not Leave Any Marks When Disassembled..
【Friendly Service】: The Core Value We Have Always Insisted On Is Selling Quality Products And Making Our Customers Satisfied Is Our Goal. Reach Us For Any Questions Or Issues With Our Product, We Are Here Of Your Issue..
【Decorative】: This Car Body Protection Strip Not Only Covers Your Existing Scratches, But Also Decorates Your Car To Make It Look More Sporty And Stylish. In Addition, It Is Very Easy To Clean. If There Are Footprints Or Dust, Just Wipe It Off With A Wet Towel And It Will Be Back To A Brand New Look..
【Package Includes】: You Will Get 4 Pieces Of Door Sill Protectors, Which Are 23.62 Inches Long. There Is Also 1 Piece Of Rear Bumper Protection Strip, Which Is 35.43 Inches In Length. The Standard Size Makes It Very Widely Compatible, And It Is Universal To Most Of The Cars On The Market. If You Feel Too Long Can Free Cutting..
Features
- Carbon Fiber & Leather : Our car door sill bar is made of eco-friendly leather material, which is very textured to the touch and can effectively prevent wear and tear, and can work normally even when exposed to water. The surface is beautifully textured with carbon fiber, which looks more stylish and adds a sporty look.
- Package Includes : You will get 4 pieces of door sill protectors, which are 23.62 inches long. There is also 1 piece of rear bumper protection strip, which is 35.43 inches in length. The standard size makes it very widely compatible, and it is universal to most of the cars on the market. If you feel too long can free cutting.
- Easy to Install & Remove : The installation of the door sill protector guards is very quick and easy. All you need to do is clean the target location, wait for it to dry completely, peel off the protective film and apply the door sill strip. Pressing hard for a few seconds will make it more solid. Please rest assured that it will not leave any marks when disassembled.
- Decorative : This car body protection strip not only covers your existing scratches, but also decorates your car to make it look more sporty and stylish. In addition, it is very easy to clean. If there are footprints or dust, just wipe it off with a wet towel and it will be back to a brand new look.
- Friendly Service : The core value we have always insisted on is selling quality products and making our customers satisfied is our goal. Reach us for any questions or issues with our product, we are here of your issue.
- See more on Amazon...
Brand: AUCELI | Manufacturer: AUCELI
Dimensions: 5.00 x 5.00 x 2.00 inches
Warranty: 0.2
See On Amazon #15
37100-42090 Rear Driveshaft Replacement for 2006-2018 Toyota RAV4, 2015-2017 Lexus NX200t NX300h 4WD Rear Drive Prop Shaft 936-722 Flynsu
Asin: B08W9GT248 | Ean: 8761222411525
Rear Drive Shaft Replacement For Toyota Rav4 2006-2018 | Replacement For Lexus Nx200t Nx300h 2015-2017.
Your Driveshaft May Need To Be Replaced In Cases Where The Universal Joint Clunks, We Provide 12 Months Warranty For This Shaft, Welcome To Contact.
Balanced, Vibration Free, Coating With Anti-Corrosion To Prevent Rust.
Oe Part# 936-722, 37100-42090, 936722, 3710042090, 371000R010.
Features
- RAV4 NX200t NX300h 4WD Rear Driveshaft Drive Shaft Assembly
- OE Part# 936-722, 37100-42090, 936722, 3710042090, 371000R010
- Rear Drive Shaft Replacement for Toyota RAV4 2006-2018 | Replacement for Lexus NX200t NX300h 2015-2017
- Balanced, vibration free, coating with Anti-Corrosion to prevent rust
- Your driveshaft may need to be replaced in cases where the universal joint clunks, we provide 12 months warranty for this shaft, welcome to contact
- See more on Amazon...
Brand: Flynsu | Manufacturer: Flynsu
See On Amazon #16
(4pcs) Heavy Duty Wheel Bearings for Can-Am Defender/Commander/Maverick/Outlander/Renegade Replaces # 293350040, 705400088, 293350118, Front Wheel Shaft Seal (2 Pcs) #293250246
Asin: B08NVJ2DN5 | Ean: 0641197081443 | UPC: 641197081443
Premium Quality -- The Highest Grade Materials Have Been Used In The Manufacture Of Our Kit. New High Performance, For High Speed Uses. Double Seal Protects Penetration Of Water And Dirt..
Satisfaction Guarantee -- If You Are Not Satisfied With Camoo Products, Simply Return It For A Full Refund In 30 Days. Guarantee With 12 Months Warranty. No Worry About Buying!.
Package Includes -- Wheel Bearing Part Number 293350040 Qty (4); Front Drive Shaft Seal Part Number 293250246 Qty (2)..
Exceeds Oem Specifications -- Wheel Bearings Replaces Oem Cross Reference: 293350040, 705400088, 293350118; Front Drive Shaft Seal Replace # 293250246..
Features
- FITMENT -- [2 Front Seals] For 2013-2016 Commander 800/1000; 2013-2015 Maverick 1000 FRONT ONLY. [4 Wheel Bearings] For all 2005-2019 Can-Am Outlanders, 2011-2019 Can-Am Commander 800 1000 models, 2007-2019 Can-Am Renegades, 2013-2019 Can-Am Maverick 800 1000 models(excepts X3 version), Can-Am Defender 800 and 1000.
- Exceeds OEM Specifications -- Wheel Bearings Replaces OEM Cross Reference: 293350040, 705400088, 293350118; Front drive shaft seal Replace # 293250246.
- PREMIUM QUALITY -- The highest grade materials have been used in the manufacture of our kit. New High Performance, For High Speed Uses. Double seal protects penetration of water and dirt.
- PACKAGE INCLUDES -- Wheel bearing Part Number 293350040 qty (4); Front drive shaft seal Part Number 293250246 qty (2).
- SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!
- See more on Amazon...
Brand: Camoo | Manufacturer: Camoo
See On Amazon #17
NewYall Driveshaft Propshaft CV Joint Repair kit 932-306 for Jeep Wrangler 2007-2016 Front Rear Drive Shaft Propeller Bolt Constant Velocity Joint Boot Lock Tie and Grease Set
Asin: B07VV9L3NC | Model: 52lll597AA | PartNumber: 52lll597AA | Ean: 0754909647292 | UPC: 754909647292
Oe Ref. 932-306 52123553Aa, 52123555Aa, 52123557Aa, 52123558Aa 52853317Ac, 52853319Ac, 52853321Ac, 52853329Ac 52853330Ac, 52853336Ac, 52853338Ad, 52853346Ad 52853349Ac, 52853350Ac, 68022101Ad, 68022102Ad 68022104Ac, 68022105Ac, 68022107Ac.
Features
- For Jeep Wrangler 2007-2016
- OE Ref. 932-306 52123553AA, 52123555AA, 52123557AA, 52123558AA 52853317AC, 52853319AC, 52853321AC, 52853329AC 52853330AC, 52853336AC, 52853338AD, 52853346AD 52853349AC, 52853350AC, 68022101AD, 68022102AD 68022104AC, 68022105AC, 68022107AC
- See more on Amazon...
Brand: NewYall | Manufacturer: NewYall
See On Amazon #18
4PCS Universal Vehicle Hood Pins, Quick Release License Plate Lock Clip, Push Button Bonnet Kit, Aluminum Alloy Quick Latch Lock for Auto Bumper, Diameter 1.18 inch Fits Most Cars (Black)
Asin: B0BQ6P2CBS | Model: Black | PartNumber: Black
【Wide Application】: The Mini Latches Is A Multifunctional Button Release Lock For A Wide Range Of Industries, Including: Cars, Cabinets, Custom Furniture, Industrial, Marine, Recreational Vehicles, Body Panels, Hoods, Deck Lids, Air Cleaners And You Can Diy Others With It In Any Where You Think Might Useful, Unleash Your Creativity!.
【Customer Service】: Professional After-Sales Service. Your Satisfaction Is Our First Priority. We Aims To Provide Our Customers A Happy Shopping Experience And Completed After Sale Service. If You Have Any Question To Our Product, Please Feel Free To Contact Us. We Promise That All Problems Will Be Satisfactorily Satisfied Within 24 Hours..
【Quality Guarantee】: We Have 100% Test Before Shipping To Ensure Product Safety And High Quality, Make Sure The Latch Button Works Smoothly Without Obstructing The Feeling. If There Is Any Quality Problem, Please Feel Free To Contact Us. We Promise Offer You A Satisfied Solution..
【Experience Sharing】: Think Reasonably About Panel Force Before Use On Extremely Large Panels. Uneven Force May Affect The Life Of Mini Latch. We Recommend Increasing The Quantity Of Latch Using For Important Panels Or Choose Other Larger One Would Be Better..
Features
- Premium Material : Made of high-quality aluminum alloy, durable, high temperature resistant and scrape resistance. Its outside Diameter is 1.18"/30mm. The mini latches are able to withstand the pulling forces of 150 lbs, more suitable for fixing bumpers and license plates, as well as DIY connection. They are design to create a strong connection with a clean and stylish look.
- Experience Sharing : Think reasonably about panel force before use on extremely large panels. Uneven force may affect the life of mini latch. We recommend increasing the quantity of latch using for important panels or choose other larger one would be better.
- Wide Application : The mini latches is a multifunctional button release lock for a wide range of industries, including: cars, cabinets, custom furniture, industrial, marine, recreational vehicles, body panels, hoods, deck lids, air cleaners and you can DIY others with it in any where you think might useful, unleash your creativity!
- Quality Guarantee : We have 100% test before shipping to ensure product safety and high quality, make sure the latch button works smoothly without obstructing the feeling. If there is any quality problem, please feel free to contact us. We promise offer you a satisfied solution.
- Customer Service : Professional after-sales service. Your satisfaction is our first priority. We aims to provide our customers a happy shopping experience and completed after sale service. If you have any question to our product, please feel free to contact us. We promise that all problems will be satisfactorily satisfied within 24 hours.
- See more on Amazon...
Brand: AICEL | Manufacturer: AICEL
Dimensions: 0.50 x 0.50 x 0.50 inches
See On Amazon #19
4Pcs Front and Rear CVD Drive Shafts U-Joint Steel Metal RC Driveshaft for 1/10 Traxxas Slash/Stampede/Hoss/Rustler VXL 4X4 4WD RC Car Upgrade Parts(Steel Metal Front&Rear Axle, Sliver)
Asin: B0CQ2LYBJB
【U-Joint Design】: The Steel Front And Rear Driveshaft Cvd Adopts U-Joint Design, Which Has Strong Angle Compensation Ability, Professional Manufacturing And Fine Workmanship, Compact Structure And High Transmission Efficiency, Ensuring Smooth Transmission. 1/10 Traxxas Slash 4X4 Upgrades Rc Car Upgrade Parts Highly Enhanced Strength And Precision.
【What You Get】: 2 × Front Drive Shaft, 2 × Rear Drive Shaft, 4 X Screws, 4 × M4 Nuts, 4 × Aluminum Material Gasket, 4 × Silicone Gasket. If You Have Any Questions About Our 1/10 Rc Car Slash 4X4 2Wd Drive Shaft, Please Feel Free To Contact Us. Your Satisfaction Is Our Top Priority!.
【Easy To Assemble】: The Front And Rear Cvd Drive Shaft Comes With Mounting Accessories For Easy Installation, You Can Directly Use Them On Your 1/10 Rc Car Models. The 4X4 Slash Cvd Driveshaft Is Designed To Allow More Smooth Rotation! Precision Machining Perfectly Combined With Steering Block, Providing Unmatched Driving Versatility.
【Top Quality Material】: The 1/10 Rc Car Drive Shaft Cvd Is Made Of High-Quality Steel Metal Material For Greater Strength And Stable Driving Performance, Solving The Problem Of 1/10 Cvd Driveshaft Fracture. Design For Long-Life Durability, The Rc Slash 4X4 Upgrades Drive Shaft Works Better Than Plastic Stock Drive Shaft.
Features
- Good Compatibility : The 4Pcs Front and Rear CVD Driveshaft suitable for 1/10 RC Car Slash Platinum/Ultimate/VXL 4x4 2WD/Rustler VXL 4X4 2WD/Stampede VXL 4X4 2WD/Hoss VXL 4X4 2WD
- Top Quality Material : The 1/10 RC Car Drive Shaft CVD is made of high-quality steel metal material for greater strength and stable driving performance, solving the problem of 1/10 CVD Driveshaft fracture. Design for long-life durability, the RC Slash 4x4 upgrades Drive Shaft works better than plastic stock drive shaft
- U-joint Design : The Steel Front and Rear Driveshaft CVD adopts U-joint design, which has strong angle compensation ability, professional manufacturing and fine workmanship, compact structure and high transmission efficiency, ensuring smooth transmission. 1/10 traxxas slash 4x4 upgrades rc car upgrade parts highly enhanced strength and precision
- Easy to Assemble : The Front and Rear CVD Drive Shaft comes with mounting accessories for easy installation, you can directly use them on your 1/10 RC Car Models. The 4x4 Slash CVD Driveshaft is designed to allow more smooth rotation! Precision machining perfectly combined with steering block, providing unmatched driving versatility
- What You Get : 2 Front drive shaft, 2 Rear drive shaft, 4 x Screws, 4 M4 Nuts, 4 Aluminum Material Gasket, 4 Silicone Gasket. If you have any questions about our 1/10 RC Car Slash 4x4 2WD Drive Shaft, please feel free to contact us. Your satisfaction is our top priority!
- See more on Amazon...
Brand: Generic | Manufacturer: XIANTOU
Dimensions: 0.66 x 5.78 x 3.07 inches
See On Amazon #20
Hirificing Black Door Sill Guard Protector, 4PCS 3D Carbon Fiber Anti-Scratch Door Entry Edge Bumper Sill Scuff Plate Trim, Front/Rear Door Threshold Protector Cover Sticker Strips
Asin: B0CYPL1B6R | Model: Hirificing-AUTO-20 | PartNumber: Hirificing-AUTO-20
【Upgrade Material】These Car Door Sill Scuff Plate Protectors Are Made Of Upgraded Pvc Material, Which Is Strong, Not Easy To Break And Elastic, High Temperature Resistant And Waterproof, And Can Effectively Protect Car Door Sills For A Long Time..
【Wide Application】Our Anti-Scratch Threshold Cover Strips Are Two Long And Two Short, A Total Of 4 Stickers. The Long Size Is 23.6×2.7 Inches And The Short Size Is 15.7×2.7 Inches. It Is Suitable For Front And Rear Door Sills And Is Compatible With Car, Suv, Truck And Other Transportation On The Market..
【Easy To Install】Our Carbon Fiber Sill Protection Stickers Are Self-Adhesive On The Back, Which Has Strong Adhesive Function And Can Be Firmly Attached To The Surface Of The Object Without Leaving Any Marks Or Damaging The Car Paint. Easy To Install, The Scraper Can Help You Apply It Evenly..
【Personalized Decoration】These Car Door Edge Entry Guards Have 3D Carbon Fiber Texture, Beautiful And Fashionable, And Are Available In Purple, Red, Black, Pink, Blue, Gray And Other Colors. Moreover, Car Door Sills Will Accumulate Dust And Wear Over Time, So Decorative Strips Can Play A Very Good Decorative Role..
Features
- Protect Paint Surface Our car door sill protector can provide good anti-wear and anti-scratch protection for the door sill, protecting the original paint of the car, and the door sill strips also have a carbon fiber texture, which can prevent slipping when you get in and out of the car.
- Personalized Decoration These car door edge entry guards have 3D carbon fiber texture, beautiful and fashionable, and are available in purple, red, black, pink, blue, gray and other colors. Moreover, car door sills will accumulate dust and wear over time, so decorative strips can play a very good decorative role.
- Upgrade Material These car door sill scuff plate protectors are made of upgraded PVC material, which is strong, not easy to break and elastic, high temperature resistant and waterproof, and can effectively protect car door sills for a long time.
- Easy to Install Our carbon fiber sill protection stickers are self-adhesive on the back, which has strong adhesive function and can be firmly attached to the surface of the object without leaving any marks or damaging the car paint. Easy to install, the scraper can help you apply it evenly.
- Wide Application Our anti-scratch threshold cover strips are two long and two short, a total of 4 stickers. The long size is 23.6 2.7 inches and the short size is 15.7 2.7 inches. It is suitable for front and rear door sills and is compatible with car, SUV, truck and other transportation on the market.
- See more on Amazon...
Brand: Hirificing | Manufacturer: Hirificing
Dimensions: 0.10 x 23.60 x 2.70 inches | Weight: 0.12 pounds
See On Amazon
Looking For Something Else?
Search