MECCANIXITY 10pcs 1mmx200mm and 10Pcs 2mmx200mm Carbon Fiber Rod for DIY Subject
Asin: B09VCFJ8NS | Model: mef211101ee0003 | PartNumber: mef211101ee0003
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Specific Strength And Elastic Modulus Of The Carbon Fiber Bar Are Actually Higher Than Carbon Steel, Yet It Is Lighter Than Aluminum. It Has Good Electrical Conductivity And Tensile Strength..
Due To The Manual Measurement Please Allow 0.1-0.5Mm Error..
Easy To Cut. You Can Cut To Any Size You Want According To Your Needs..
Material: Carbon Fiber; Length: 200Mm / 7.87 Inch; Diameter: 1Mm/0.04 Inch ; 2Mm/0.07 Inch; Pack Of 1 Set Of Carbon Fiber Rod ( 10Pcs 2Mm Diameter+10Pcs 1Mm Diameter)..
Features
- Carbon Fiber Rod is widely used in model aircraft, stunt kites, aviation models, model cars, multi-rotor support rods, DIY aircraft, 3D printers, luggage, etc.
- Material: Carbon Fiber; Length: 200mm / 7.87 inch; Diameter: 1mm/0.04 inch ; 2mm/0.07 inch; Pack of 1 Set of Carbon Fiber Rod ( 10pcs 2mm Diameter+10pcs 1mm Diameter).
- The specific strength and elastic modulus of the carbon fiber bar are actually higher than carbon steel, yet it is lighter than aluminum. it has good electrical conductivity and tensile strength.
- Easy to cut. You can cut to any size you want according to your needs.
- Due to the manual measurement please allow 0.1-0.5mm error.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon Similar To MECCANIXITY 10pcs 1mmx200mm and 10Pcs
#1
MECCANIXITY Fully Threaded Rod M10 x 250mm 1.5mm Thread Pitch 304 Stainless Steel Right Hand Threaded Rods Bar Studs 4 Pack
Asin: B0BLG655LD
Threaded Rod Made Of 304 Stainless Steel, Provides Great Corrosion Resistance And Antirust Ability For Long Service Life.Fully Threaded Rods Are Widely Applied In Many Occasions..
Note: All Size Above Is Measured By Manual, Please Allow +/-0.1 Inch Error..
Instructions: Select The Appropriate Size Threaded Rod, Connect The Nut On The Machine, And Tighten It.
The Fully Threaded Rod, We Provide Here, Are In The Size Of: Material: 304 Stainless Steel; Color: Silver Tone; Thread Size: M10; Thread Length: 250Mm/9.84Inch; Thread Pitch: 1.5Mm/0.059Inch.
Features
- The fully threaded rod is mainly Used for assembly fastening, screwing into threaded nuts or tapped holes., U-bolts or hangers as fixed accessories. Wide Used on stepping motor driving guide rail, machine tool, and other equipment.
- The fully threaded rod, we provide here, are in the size of: Material: 304 Stainless Steel; Color: Silver Tone; Thread size: M10; Thread Length: 250mm/9.84inch; Thread Pitch: 1.5mm/0.059inch
- Threaded rod made of 304 stainless steel, provides great corrosion resistance and antirust ability for long service life.Fully threaded rods are widely applied in many occasions.
- Instructions: select the appropriate size threaded rod, connect the nut on the machine, and tighten it
- NOTE: All size above is measured by manual, please allow +/-0.1 inch error.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #2
MECCANIXITY 10Pcs Standard Plastic Rectangle Aluminum Extrusion End Cap Black Hole Dia 7.2mm 120x40mm for Trolley, Fish Tank Rack, Storage Rack
Asin: B0CGJCVDVM
The Durable Materials Used In The Construction Of This End Cap Make It Resistant To Wear, Rust, And Corrosion, Allowing For Long-Term Usage Even In Most Environments. The End Cap Protects The Extrusion Profiles' Open Ends, Preventing Dust, Debris, Or Water From Entering. It Also Covers Any Edges, Enhancing Safety And Aesthetics..
Please Note That This Is A Standard End Cap Suitable For T-Slot Aluminum Profiles, Not Suitable For V-Slot Aluminum Profiles Of 3D Printers..
Simply Press In By Hand, Then Use A Small Hammer Or Plastic Hammer To Drive Into The Center Hole..
Cover Size: 120 X 40Mm/4.72 X 1.57" (L*W); Mounting Hole Diameter: 7.2Mm/0.28"; Hole Number: 3; Material: Abs; Color: Black; In The Package Of: 10 X Extrusion End Cap.
Features
- This end cap is specifically designed to fit European standard aluminum extrusion profiles, providing a secure and professional finishing touch. Suitable for various applications, including climbing platform, fish tank rack, storage rack, shade house, trolley, and so on. It provides a functional solution to end-capping needs.
- Cover Size: 120 x 40mm/4.72 x 1.57 (L*W); Mounting Hole Diameter: 7.2mm/0.28; Hole Number: 3; Material: ABS; Color: Black; In the package of: 10 x Extrusion End Cap
- The durable materials used in the construction of this end cap make it resistant to wear, rust, and corrosion, allowing for long-term usage even in most environments. The end cap protects the extrusion profiles' open ends, preventing dust, debris, or water from entering. It also covers any edges, enhancing safety and aesthetics.
- Simply press in by hand, then use a small hammer or plastic hammer to drive into the center hole.
- Please note that this is a standard end cap suitable for T-slot aluminum profiles, not suitable for V-slot aluminum profiles of 3D printers.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #3
MECCANIXITY Plastic Flat Washers 10mm 11mm OD 4mm 5mm ID 1mm Thick for Faucet Pipe Water Hose, Clear 200in1 Set
Asin: B09QFZKQYB | Model: mef210923ee0086 | PartNumber: mef210923ee0086
Plastic Washers Are Flat Rings With Center Holes To Accommodate Fasteners Or Allow Fluids To Pass Through.
Package Contents: 100Pcs X 10X4x1mm Flat Washers, 100Pcs X 11X5x1mm Flat Washers.
They Prevent Leaks, Protect Surfaces, And Dampen Vibration In A Variety Of Applications Such As Pipe, Valve, Hose Nut, And Other Plumbing Repair Or Retrofit Applications.
Thickness: 1Mm / 0.04 Inch; Inner Diameter: 4Mm / 0.16 Inch; 5Mm / 0.2 Inch; Outer Diameter: 10Mm / 0.4 Inch; 11Mm / 0.43 Inch.
Features
- Durable PE plastic with wear-resisting, anti-corrosion, strong sealing, and can be insulated
- Thickness: 1mm / 0.04 inch; Inner Diameter: 4mm / 0.16 inch; 5mm / 0.2 inch; Outer Diameter: 10mm / 0.4 inch; 11mm / 0.43 inch
- Plastic washers are flat rings with center holes to accommodate fasteners or allow fluids to pass through
- They prevent leaks, protect surfaces, and dampen vibration in a variety of applications such as pipe, valve, hose nut, and other plumbing repair or retrofit applications
- Package Contents: 100pcs x 10x4x1mm Flat Washers, 100pcs x 11x5x1mm Flat Washers
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #4
MECCANIXITY Hex Coupling Nuts M10 x 1mm Fine Thread 20mm Length Sleeve Stud Rod Adapters Pipe Connectors Pack of 10
Asin: B09TXG37PJ
Made Of Iron Material, Surface Zinc Plated, With Good Strength And Corrosion Resistance. Two M10 Thread Holes On The Bottom Are Easy To Tighten Or Loosen..
Please Check The Thread Size Before Buying..
M10 Thread, Easy To Screw Into Threaded Screws Or Bolts..
Material: Iron; Surface Treatment: Zinc Plated; Thread Size: M10*1Mm; Size: 14Mmx20mm / 0.55“X0.79" (Hex Width*Height); Package Content: 10 X Hex Coupling Nuts.
Features
- Good hardware for connecting threaded pipes or threaded connectors together. Common accessories that are used on extending the screws or bolts. Suitable for installing chandeliers, floor lamps, table lamps, and various DIY lighting fixtures with M10 thread.
- Material: Iron; Surface treatment: Zinc Plated; Thread Size: M10*1mm; Size: 14mmx20mm / 0.55 x0.79 (Hex Width*Height); Package Content: 10 x Hex Coupling Nuts
- Made of iron material, surface zinc plated, with good strength and corrosion resistance. Two M10 thread holes on the bottom are easy to tighten or loosen.
- M10 thread, easy to screw into threaded screws or bolts.
- Please check the thread size before buying.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #5
MECCANIXITY Flexible Flat Cable Extension Ribbon Cables 10 Pins 1.0mm Pitch 200mm for 3D Printer, DIY, Camera, Screen and DVD Player Connector A Type Pack of 10
Asin: B0BG7F5YCY | Model: mea220607ee0455 | PartNumber: mea220607ee0455
Use Reinforcing Materials, Which Are Relatively Strong And Not Easy To Break. Flexible Flat Cable (Ffc) Can Reduce The Volume Of Electronic Products Greatly..
If The Line Is Too Long, The Attenuation Will Increase. Please Choose The Right Size For Your Projects..
How To Use It? 1. Compatible Use With Extension Board Or Adapter Board; 2. Choose The Right Pins And Pitch To Connect; 3. Just Insert It Into The Pcb Board To Finish..
The Ffc/Fpc Cables,We Provide Here,Is In Size Of: Model: A Type (Metal Pin On The Same Side); Pin: 10 Pins; Pitch: 1.0Mm; Length: 200Mm; In The Package Of: 10 X Flexible Flat Cable..
Features
- Widely used for connection between PCB boards, and in miniaturized electrical equipment, such as the 3D printer, DIY models, cameras, touch screens, computers, TVs screens, drones, PTZ, DVD players, and so on.
- The FFC/FPC cables,we provide here,is in size of: Model: A Type (Metal Pin on the Same Side); Pin: 10 Pins; Pitch: 1.0mm; Length: 200mm; In the package of: 10 x Flexible Flat Cable.
- Use reinforcing materials, which are relatively strong and not easy to break. Flexible Flat Cable (FFC) can reduce the volume of electronic products greatly.
- How to use it? 1. Compatible use with extension board or adapter board; 2. Choose the right pins and pitch to connect; 3. Just Insert it into the PCB board to finish.
- If the line is too long, the attenuation will increase. Please choose the right size for your projects.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #6
MECCANIXITY 5Pcs 3mmx200mm and 10Pcs 1mmx400mm Carbon Fiber Rod for RC Airplane DIY Craft
Asin: B09VCFG7ZY | Model: mef210924ee0051 | PartNumber: mef210924ee0051
High Strength, Corrosion Resistance, Surface Smoothness, Straightness Good, Stable Performance..
Please Take The Right Size You Want..
Its Specific Strength And Elastic Modulus Are Actually Higher Than Carbon Steel, Yet It Is Lighter Than Aluminum..
Material: Carbon Fiber, Length: 400Mm /15.7 Inch, 200Mm/7.8 Inch; Diameter: 1Mm/0.04 Inch ; 3Mm/0.12 Inch; Pack Of 1 Set Of Carbon Fiber Rod ( 10Pcs 1Mm Diameter+ 5Pcs 3Mm Diameter).
Features
- Carbon Fiber is perfect for construction that requires great strength without excess weight.
- Material: Carbon Fiber, Length: 400mm /15.7 inch, 200mm/7.8 inch; Diameter: 1mm/0.04 inch ; 3mm/0.12 inch; Pack of 1 Set of Carbon Fiber Rod ( 10pcs 1mm Diameter+ 5pcs 3mm Diameter)
- High strength, corrosion resistance, surface smoothness, straightness good, stable performance.
- Its specific strength and elastic modulus are actually higher than carbon steel, yet it is lighter than aluminum.
- Please take the right size you want.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #7
MECCANIXITY 10pcs 1mmx200mm + 10pcs 2mmx200mm + 10pcs 3mmx200mm Carbon Fiber Rod for DIY Subject
Asin: B0CWGMN5CR
The Specific Strength And Elastic Modulus Of The Carbon Fiber Bar Are Actually Higher Than Carbon Steel, Yet It Is Lighter Than Aluminum. It Has Good Electrical Conductivity And Tensile Strength..
Due To The Manual Measurement Please Allow 0.1-0.5Mm Error..
Easy To Cut. You Can Cut To Any Size You Want According To Your Needs..
Material: Carbon Fiber; Length: 200Mm /7.9 Inch; Diameter: 1Mm/0.04 Inch ; 2Mm/0.08 Inch; 3Mm/0.12 Inch; Pack Of 1 Set Of Carbon Fiber Rod (10Pcs 1Mmx200mm + 10Pcs 2Mmx200mm + 10Pcs 3Mmx200mm)..
Features
- Carbon Fiber Rod is widely used in model aircraft, stunt kites, aviation models, model cars, multi-rotor support rods, DIY aircraft, 3D printers, luggage, etc.
- Material: Carbon Fiber; Length: 200mm /7.9 inch; Diameter: 1mm/0.04 inch ; 2mm/0.08 inch; 3mm/0.12 inch; Pack of 1 Set of Carbon Fiber Rod (10pcs 1mmx200mm + 10pcs 2mmx200mm + 10pcs 3mmx200mm).
- The specific strength and elastic modulus of the carbon fiber bar are actually higher than carbon steel, yet it is lighter than aluminum. it has good electrical conductivity and tensile strength.
- Easy to cut. You can cut to any size you want according to your needs.
- Due to the manual measurement please allow 0.1-0.5mm error.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #8
MECCANIXITY 10pcs 1mmx200mm and 5pcs 2mmx200mm Carbon Fiber Rod for DIY Subject
Asin: B0CWGBTK51
The Specific Strength And Elastic Modulus Of The Carbon Fiber Bar Are Actually Higher Than Carbon Steel, Yet It Is Lighter Than Aluminum. It Has Good Electrical Conductivity And Tensile Strength..
Due To The Manual Measurement Please Allow 0.1-0.5Mm Error..
Easy To Cut. You Can Cut To Any Size You Want According To Your Needs..
Material: Carbon Fiber; Length: 200Mm /7.9 Inch; Diameter: 1Mm/0.04 Inch ; 2Mm/0.08 Inch; Pack Of 1 Set Of Carbon Fiber Rod (10Pcs 1Mmx200mm And 5Pcs 2Mmx200mm)..
Features
- Carbon Fiber Rod is widely used in model aircraft, stunt kites, aviation models, model cars, multi-rotor support rods, DIY aircraft, 3D printers, luggage, etc.
- Material: Carbon Fiber; Length: 200mm /7.9 inch; Diameter: 1mm/0.04 inch ; 2mm/0.08 inch; Pack of 1 Set of Carbon Fiber Rod (10pcs 1mmx200mm and 5pcs 2mmx200mm).
- The specific strength and elastic modulus of the carbon fiber bar are actually higher than carbon steel, yet it is lighter than aluminum. it has good electrical conductivity and tensile strength.
- Easy to cut. You can cut to any size you want according to your needs.
- Due to the manual measurement please allow 0.1-0.5mm error.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #9
MECCANIXITY 10pcs 1mmx100mm and 10pcs 1.5mmx300mm Lathe Round Rods, Lathe Bar for DIY Craft Tool
Asin: B0CWG94X6P
The Surface Is Smooth, Easy To Shape, And No Cracks Formed. Round Steel Rods Are Sturdy And Durable For Diy Craft Making..
Due To The Manual Measurement Please Allow 0.1-0.5Mm Error..
Easy To Cut. You Can Cut To Any Size You Want According To Your Needs..
Material: 304 Stainless Steel; Color: Silver Tone; Diameter: 1Mm; 1.5Mm; Length: 100Mm/3.9 Inch; 300Mm/11.8 Inch; Pack Of 1Set Lathe Round Rods ( 10Pcs 10Pcs 1Mmx100mm + 10Pcs 1.5Mmx300mm)..
Features
- 304 stainless steel rods are good for general purpose applications. Can be used for gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.
- Material: 304 stainless steel; Color: Silver tone; Diameter: 1mm; 1.5mm; Length: 100mm/3.9 inch; 300mm/11.8 inch; Pack of 1set Lathe Round Rods ( 10pcs 10pcs 1mmx100mm + 10pcs 1.5mmx300mm).
- The surface is smooth, easy to shape, and no cracks formed. Round Steel Rods are sturdy and durable for DIY craft making.
- Easy to cut. You can cut to any size you want according to your needs.
- Due to the manual measurement please allow 0.1-0.5mm error.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #10
MECCANIXITY 10pcs 2mmx100mm and 10pcs 3mmx150mm Lathe Round Rods, Lathe Bar for DIY Craft Tool
Asin: B09YHDHCXN | Model: mef211229ee0367 | PartNumber: mef211229ee0367
The Surface Is Smooth, Easy To Shape, No Cracks Formed. Round Steel Rods Are Sturdy And Durable For Diy Craft Making..
Due To The Manual Measurement Please Allow 0.1-0.5Mm Error..
Easy To Cut. You Can Cut To Any Size You Want According To Your Needs..
Material: 304 Stainless Steel; Color: Silver Tone; Diameter: 2Mm; 3Mm; Length: 100Mm/3.93 Inch, 150Mm/5.9 Inch; Pack Of 1Set Lathe Round Rods ( 10Pcs 2Mmx100mm + 10Pcs 3Mmx150mm)..
Features
- 304 stainless steel rods are good for general purpose applications. Can be used to process graver, high-performance drills, non-standard drills, lathe tools, milling tools, axis, etc. as well as stainless steel, tool steel, and high hard metal items.
- Material: 304 stainless steel; Color: Silver tone; Diameter: 2mm; 3mm; Length: 100mm/3.93 inch, 150mm/5.9 inch; Pack of 1set Lathe Round Rods ( 10pcs 2mmx100mm + 10pcs 3mmx150mm).
- The surface is smooth, easy to shape, no cracks formed. Round Steel Rods are sturdy and durable for DIY craft making.
- Easy to cut. You can cut to any size you want according to your needs.
- Due to the manual measurement please allow 0.1-0.5mm error.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon
Looking For Something Else?
Search