Onetuon Upgrade Version CNC Dust Shoe for CNC Machines with 3.15 (80mm) Diameter Motor, Hose Adapter Outer Diameter 100mm (3.94 )
Asin: B09VDK43TW | Model: Onetuon | PartNumber: Onetuon | Ean: 0736961077033 | UPC: 736961077033
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Spindle Dia 3.15″ (80Mm) 4 Inch Dust Port Dust Collection System Spindle Dust Cover For Cnc Router Machine.
Upgrade Design This New Cnc Dust Shoe, Based On Arc Design, More Lighter, More Flexible, And More Convenient For Daily Use And Maintenance..
Good At Removing Wood Chips And Dust ,Easy To Assemble And Install, Easy To Change Bits.
Four-Sided Disassembly ,Removable On All Sides, Lightly Pressed, Lightweight And Convenient, Worry-Free And Labor-Saving.
Features
- Upgrade Version Up-down design, the brush will not be deformed Always protect the brush from damageand the brush is level with the knife
- Four-sided disassembly Removable on all sides, lightly pressed, lightweight and convenient, worry-free and labor-saving
- Spindle Dia 3.15 (80mm) 4 Inch Dust Port Dust Collection System Spindle Dust Cover For CNC Router Machine
- Good at removing wood chips and dust ,Easy to assemble and install, Easy to change bits
- Upgrade design This new cnc dust shoe, based on ARC design, more lighter, more flexible, and more convenient for daily use and maintenance.
- See more on Amazon...
Brand: Onetuon | Manufacturer: Onetuon
Dimensions: 3.54 x 8.27 x 4.72 Inches
See On Amazon Similar To Onetuon Upgrade Version CNC Dust
#1
Genmitsu CNC Dust Shoe ABS Cover Cleaner for 3018 Series CNC Router/CNC Machines with a 42mm Diameter Motor, Hose Adapter Outer Diameter 38mm (1.5 ), Transparent
Asin: B09CSYLZ36 | Model: DS3018 | PartNumber: DS3018 | Ean: 0816550024881 | UPC: 816550024881
Two-Piece Magnetic Design: Durable, Light And Flexible, Convenient For Daily Use And Maintenance. Easy To Assemble And Install. Only Take 3 Steps To Finish The Installation..
The Planting Brush Is Much Tidy And Firmer Than Other Glued Ones. You Could Just Replace The Whole Bottom Cover When The Brush Is Worn. Don’T Need To Spend Much Time Removing And Adding A New Brush (If The Brush Is Too Long For Your Bits, We Suggest That You Could Trim It Off From The Bottom According To The Bits Length Or Order A Replacement Base Bottom Cover With 20Mm Long Nylon Brush)..
The Split Design Makes It Much Easier To Replace Bits. You Only Need To Pop Off The Bottom Cover When Replacing Your Bits, No Tools Required , And Avoid Other Complicated Procedures..
This Dust Shoe Is Made Of High-Quality Transparent Abs . The Transparent Design Helps You Keep An Eye On Your Operations. Equipped With A 40Mm Long Nylon Brush To Maximize Vacuum Suction And Help Act As A Dust Sweep With High Dust Removal Efficiency. Keep Your Machine And Work Area Clean While Cutting, Drilling, And Carving..
Features
- Compatible with Genmitsu 4040-PRO and most 3018 series CNC machines on the market, including 3018-PRO, 3018-PROVer, 3018-PROVer Mach3 and 3018-MX3. Just make sure that your spindle diameter is 42mm (1.65 ) and with two 4mm (0.16 ) screw holes.
- This dust shoe is made of high-quality transparent ABS . The transparent design helps you keep an eye on your operations. Equipped with a 40mm long nylon brush to maximize vacuum suction and help act as a dust sweep with high dust removal efficiency. Keep your machine and work area clean while cutting, drilling, and carving.
- Two-Piece Magnetic Design: Durable, light and flexible, convenient for daily use and maintenance. Easy to assemble and install. Only take 3 steps to finish the installation.
- The split design makes it much easier to replace bits. You only need to pop off the bottom cover when replacing your bits, no tools required , and avoid other complicated procedures.
- The planting brush is much tidy and firmer than other glued ones. You could just replace the whole bottom cover when the brush is worn. Don t need to spend much time removing and adding a new brush (If the brush is too long for your bits, we suggest that you could trim it off from the bottom according to the bits length or order a Replacement Base Bottom Cover with 20mm long nylon brush).
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #2
Onetuon Upgrade Version CNC Dust Shoe for CNC Machines with 3.54 (90mm) Diameter Motor, Hose Adapter Outer Diameter 100mm (3.94 )
Asin: B09VDKC1N5 | Model: Onetuon | PartNumber: Onetuon | Ean: 0736961077057 | UPC: 736961077057
Spindle Dia 3.54″ (90Mm) 4 Inch Dust Port Dust Collection System Spindle Dust Cover For Cnc Router Machine.
Upgrade Design This New Cnc Dust Shoe, Based On Arc Design, More Lighter, More Flexible, And More Convenient For Daily Use And Maintenance..
Good At Removing Wood Chips And Dust ,Easy To Assemble And Install, Easy To Change Bits.
Four-Sided Disassembly ,Removable On All Sides, Lightly Pressed, Lightweight And Convenient, Worry-Free And Labor-Saving.
Features
- Upgrade Version Up-down design, the brush will not be deformed Always protect the brush from damageand the brush is level with the knife
- Four-sided disassembly Removable on all sides, lightly pressed, lightweight and convenient, worry-free and labor-saving
- Spindle Dia 3.54 (90mm) 4 Inch Dust Port Dust Collection System Spindle Dust Cover For CNC Router Machine
- Good at removing wood chips and dust ,Easy to assemble and install, Easy to change bits
- Upgrade design This new cnc dust shoe, based on ARC design, more lighter, more flexible, and more convenient for daily use and maintenance.
- See more on Amazon...
Brand: Onetuon | Manufacturer: Onetuon
Dimensions: 3.54 x 8.27 x 4.72 Inches
See On Amazon
Looking For Something Else?
Search