whiteeeen for ESP32 Super Breakout Board 3.81mm / 0.15" Terminal GPIO Expansion Board 3 Types Outputs for ESP32-DevKitC ESP-WROOM-32 Block PCB
Asin: B09VMXQTM8
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Each Pin Has 3 Leads, You Can Insert The 2.54 Dupont Male Or Female, Or You Can Use The Terminal Directly To Access The Bare Wire..
Professional Design, Powerful And Flexible, Durable..
The Dual-Row Input Bus Allows You To Plug In 0.9 "Or 1.0" Esp32 Modules For Maximum Compatibility..
3 Types Output: 2.54Mm(0.1") Male Pin Header, 2.54Mm(0.1") Female Pin Header And 3.81Mm(0.15") Terminal Blocks..
Features
- for ESP32 GPIO expansion board 38Pin with 3 types output.
- 3 Types Output: 2.54mm(0.1) Male Pin Header, 2.54mm(0.1) Female Pin Header and 3.81mm(0.15) Terminal Blocks.
- Each pin has 3 leads, you can insert the 2.54 DuPont male or female, or you can use the terminal directly to access the bare wire.
- The dual-row input bus allows you to plug in 0.9 or 1.0 ESP32 modules for maximum compatibility.
- Professional design, powerful and flexible, durable.
- See more on Amazon...
Brand: whiteeeen | Manufacturer: whiteeeen
Dimensions: 0.71 x 4.72 x 4.72 inches | Weight: 0.07 Pounds
Warranty: 2 years
See On Amazon Similar To whiteeeen for ESP32 Super Breakout
#1
ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA Compatible with Arduino IDE (3PCS)
Asin: B08D5ZD528 | Model: 15363 | PartNumber: 15363
Supportthree Modes: Ap, Sta, And Ap+Sta.
Esp32 Is A Safe, Reliable, And Scalable To A Variety Of Applications.
Ultra-Low Power Consumption, Compatible With Arduino Ide.
Support Lwip Protocol, Freertos.
Features
- 2.4GHz Dual Mode WiFi + Bluetooth Development Board
- Support LWIP protocol, Freertos
- SupportThree Modes: AP, STA, and AP+STA
- Ultra-Low power consumption, Compatible with Arduino IDE
- ESP32 is a safe, reliable, and scalable to a variety of applications
- See more on Amazon...
Brand: AITRIP | Manufacturer: AiTrip
Dimensions: 0.59 x 2.05 x 1.18 inches
See On Amazon #2
HiLetgo ESP-WROOM-32 ESP32 ESP-32D Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE
Asin: B0718T232Z | Model: 3-01-1287 | PartNumber: 3-01-1287
Support Lwip Protocol, Freertos.
Esp32 Is A Safe, Reliable, And Scalable To A Variety Of Applications.
Supportthree Modes: Ap, Sta, And Ap+Sta.
Ultra-Low Power Consumption, Works Perfectly With The Arduino Ide.
Features
- 2.4GHz Dual Mode WiFi + Bluetooth Development Board
- Ultra-Low power consumption, works perfectly with the Arduino IDE
- Support LWIP protocol, Freertos
- SupportThree Modes: AP, STA, and AP+STA
- ESP32 is a safe, reliable, and scalable to a variety of applications
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #3
HiLetgo 3pcs ESP32 ESP-32D ESP-WROOM-32 CP2012 USB C 38 Pin WiFi+Bluetooth Dual Core Type-C Interface ESP32-DevKitC-32 Development Board Module STA/AP/STA+AP
Asin: B0CNYK7WT2 | Model: 3-01-1842 | PartNumber: 3-01-1842
Support Many Kinds Of Interfaces Such As Uart/Spi/I2c/Pwm/Dac/Adc..
With 2.4Ghz Wifi+Bluetooth Dual-Mode, Support Sta/Ap/Sta+Ap Mode, Universal At Command, Easy To Use..
Esp32 Integrates Antenna, Switches, Rf Balun, Power Amplifiers, Low Noise Amplifiers, Filters And Power Management Modules..
Features
- ESP32 CP2012 USB C (Type-C) core board, it has 38 pins and more features than a 30-pin module. Narrower width, can be connected to the breadboard very well.
- ESP32 integrates antenna, switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules.
- Support many kinds of interfaces such as UART/SPI/I2C/PWM/DAC/ADC.
- With 2.4GHz WiFi+Bluetooth Dual-mode, support STA/AP/STA+AP mode, universal AT command, easy to use.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #4
Teyleten Robot ESP32S ESP32 ESP-WROOM-32 Development Board 2.4GHz Dual-Core WiFi +Bluetooth 2 Function Microcontroller for Arduino (ESP32 38P, 3PCS)
Asin: B09J95SMG7 | Ean: 9339036871751
2. When Using Breadboard For Development And Debugging, The Standard Needle Arrangement On Both Sides Can Make The Operation More Simple And Convenient..
9.32S Is The Core Development Board Based On Esp-32S Module..
6.In Arduino Ide，Choose Esp32 Dev.
7.The Maximum Operating Voltage Of The Esp32 Is 3.3V. The Esp32 Has An On-Board Voltage Regulator That Can Withstand Voltages Up To 5V Using The Vin And Gnd Pins. Once A Voltage Is Input To The Esp32 Development Board's Vin Pin, That Voltage Is Passed Through The Esp32's On-Board Voltage Regulator (Ams1117), Which Outputs A Constant 3.3V, Which Is The Board's Operating Voltage. Note: The Maximum Operating Voltage Of The Esp32 Is 3.3V.The Maximum Voltage That Can Be Applied To The Esp32 Development Board From The Vin Pin Is 5V.Usb Power Supply Is 5V..
4.Powerful, Support Lwip Protocol, Freertos.
5.Support Three Modes: Ap, Sta, Ap+Sta Coexistence Mode.
3.Small Volume. Easy To Embed Into Any Product.
8.You Need To Driver The Cp2102 Before You Can Start Using It.
1. The Development Board Continues 1.0 Classic Design, Eliciting Most I/O To Both Sides Of The Needle, Developers Can Connect Peripherals According To Their Own Needs..
Features
- If you think you have received the wrong product, please contact us and give us a chance to correct it,We also have tech support, just contact us on Amazon,thank you.
- 1. The Development Board continues 1.0 classic design, eliciting most I/O to both sides of the needle, developers can connect peripherals according to their own needs.
- 2. When using breadboard for development and debugging, the standard needle arrangement on both sides can make the operation more simple and convenient.
- 3.small volume. Easy to embed into any product
- 4.Powerful, support LWIP protocol, freertos
- 5.Support three modes: AP, STA, AP+STA coexistence mode
- 6.in Arduino IDE choose ESP32 DEV
- 7.The maximum operating voltage of the ESP32 is 3.3V. The ESP32 has an on-board voltage regulator that can withstand voltages up to 5V using the VIN and GND pins. Once a voltage is input to the ESP32 development board's VIN pin, that voltage is passed through the ESP32's on-board voltage regulator (AMS1117), which outputs a constant 3.3V, which is the board's operating voltage. Note: The maximum operating voltage of the ESP32 is 3.3V.The maximum voltage that can be applied to the ESP32 Development Board from the VIN pin is 5V.USB power supply is 5V.
- 8.you need to driver the CP2102 before you can start using it
- 9.32S is the core development board based on ESP-32S module.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.05 x 0.19 x 0.10 inches
See On Amazon #5
KeeYees ESP32S ESP32 Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-in-1 Microcontroller ESP-WROOM-32 Chip for Arduino (38PIN Narrow Version, 2PCS)
Asin: B07QCP2451 | Ean: 0713871269840 | UPC: 713871269840
Support Lua Program, Easy To Develop. Support Of Three Modes: Ap, Sta And Ap + Sta..
Technical Support: Our Pdf Tutorial Is Available On This Page. Please Pull Down This Page To Find The Tutorial: User Guide (Pdf).
This Board Is Used With 2.4 Ghz Dual-Mode Wi-Fi And Bluetooth Chips Esp-Wroom-32, As Well As The 40Nm Low-Power Technology..
The Module Has 38 Pins And Has More Features Than A 30-Pin Module. Narrower Width, Compatible With Breadboard.
Features
- This module is safe, reliable, and scalable to a variety of applications.
- The module has 38 pins and has more features than a 30-pin module. Narrower width, compatible with breadboard
- Support Lua program, easy to develop. Support of three modes: AP, STA and AP + STA.
- This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips ESP-WROOM-32, as well as the 40nm low-power technology.
- Technical Support: Our PDF tutorial is available on this page. Please pull down this page to find the tutorial: User Guide (PDF)
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
Dimensions: 0.47 x 1.90 x 1.00 inches
See On Amazon #6
Freenove Breakout Board for ESP32 / ESP32-S3 WROVER WROOM, Terminal Block Shield with Pin Header, 5V 3.3V Power Outputs, GPIO Status LED
Asin: B0CD2512JV | Model: FNK0091 | PartNumber: FNK0091
Independent Led -> The Status Led Is Driven By The Chip Instead Of The Gpio So The Gpio Will Not Be Affected..
Terminal Block And Header -> Connect To All Gpio Headers Of Raspberry Pi Pico, 2.54Mm / 0.1In Pitch..
Power Circuit -> Provide Multiple 5V And 3.3V Power Outputs. (5V Output Up To 3A With External Power Supply.).
Gpio Status Led -> Led On If Gpio Outputs/Inputs High Level, Led Off If Gpio Outputs/Inputs Low Level..
Features
- Compatible models -> Freenove ESP32 / ESP32-S3 series. (Note: Boards from other brands are not compatible due to different pinout.)
- GPIO status LED -> LED on if GPIO outputs/inputs high level, LED off if GPIO outputs/inputs low level.
- Independent LED -> The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected.
- Power circuit -> Provide multiple 5V and 3.3V power outputs. (5V output up to 3A with external power supply.)
- Terminal block and header -> Connect to all GPIO headers of Raspberry Pi Pico, 2.54mm / 0.1in pitch.
- See more on Amazon...
Brand: FREENOVE | Manufacturer: Freenove
Warranty: 1 year
See On Amazon #7
HiLetgo 2pcs ESP32-DevKitC ESP32-WROOM-32U Core Board ESP32 ESP-32 ESP-WROOM-32U Development Board for Arduino
Asin: B09KLS2YB3 | Model: 3-01-1670 | PartNumber: 3-01-1670
Esp32-Devkitc V4 Is A Small-Sized Esp32-Based Development Board..
Most Of The I/O Pins Are Broken Out To The Pin Headers On Both Sides For Easy Interfacing..
Esp32 Esp-32 Esp-Wroom-32U Development Board.
Features
- ESP32-DevKitC ESP32-WROOM-32U Core Board
- ESP32 ESP-32 ESP-WROOM-32U Development Board
- ESP32-DevKitC V4 is a small-sized ESP32-based development board.
- Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #8
AITRIP 2 Sets 30PIN ESP32 ESP-32S Type-C USB CP2102 Development Board + ESP32 Breakout Board Shield GPIO 1 into 2 Board 2.4GHz WiFi Bluetooth Dual Core for Arduino
Asin: B0CQN8CNFL | Ean: 0687117728296 | UPC: 687117728296
Esp32 Is Secure, Reliable And Scalable For A Wide Range Of Applications. The Esp32 Development Board Nodemcu Module Powerful, Supports Lwip Protocol, Freertos. Esp32 Also Integrates Rich Peripherals Such As Capacitive Touch Sensors, Hall Sensors, Sd Card Interfaces And Ethernet Interfaces..
This Esp32 Development Board Nodemcu Module Is The Esp32 Chip, Which Is Scalable And Self-Adaptive. The Power Supply And Radio Frequency Characteristics Are Good And Can Be Extended To Various Applications.
Gpio 1 Into 2：Aitrip Breakout Board Can Expand One Gpio Pin Of Esp32 Development Board To Two, Which Is Convenient For Users To Reuse All Pins In Smart Home Projects；Note：Only Compatible With 30 Pins Esp32 Development Board.
The Esp32 Development Board Is Used Together With The 2.4 Ghz Dual-Form Wi-Fi And Bluetooth Chip. It Uses 40 Nm Low Power Supply Technology. Very Low Power Consumption, Works Perfectly For Arduino Ide..
Features
- 30PINS ESP32 Type C NodeMCU Development Board, ESP-WROOM-32, 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Integrated, CP2102 Chip
- The ESP32 development board is used together with the 2.4 GHz dual-form Wi-Fi and Bluetooth chip. It uses 40 nm low power supply technology. Very low power consumption, works perfectly for Arduino IDE.
- ESP32 is secure, reliable and scalable for a wide range of applications. The ESP32 development board NodeMCU Module Powerful, supports LWIP protocol, freeRTOS. ESP32 also integrates rich peripherals such as capacitive touch sensors, Hall sensors, SD card interfaces and Ethernet interfaces.
- GPIO 1 INTO 2 AITRIP breakout board can expand one GPIO pin of esp32 development board to two, which is convenient for users to reuse all pins in smart home projects Note Only compatible with 30 pins ESP32 development board
- This ESP32 development board NodeMCU module is the ESP32 chip, which is scalable and self-adaptive. The power supply and radio frequency characteristics are good and can be extended to various applications
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #9
KeeYees 2pcs ESP32 Breakout Board GPIO 1 into 2 for 38PIN No Mounting Hole Version ESP32 Development Board
Asin: B09PYW1HC9
2 Type Connections: Pin Header & Screw Terminal. Just Select Them According To Your Purpose..
Updated Version: Compared With The Previous Version, The Board Of This Version Has Been Soldered Completely. No Need To Solder Parts By Yourself, Which Is Very Convenient To Use..
Double-Layer Pcb: The Expansion Board Is A Double-Layer Board. One Pin Is Wired On Both Sides. Therefore, The Circuit Is Stable And Highly Reliable, And There Will Be No Poor Circuit Contact And Unstable Signal Transmission..
Gpio 1 Into 2: This Breakout Board Can Expand One Gpio Pin Of Esp32 Development Board To Two, Which Is Convenient For Users To Reuse All Pins In Smart Home Projects. Nice Breadboard Alternative..
Features
- IMPORTANT: Only compatible with 38 pins Narrow and No Mounting Hole Version esp32 development board, ref asin: B07QCP2451. Not applicable to other versions.
- GPIO 1 INTO 2: This breakout board can expand one GPIO pin of esp32 development board to two, which is convenient for users to reuse all pins in smart home projects. Nice breadboard alternative.
- 2 TYPE CONNECTIONS: Pin Header & Screw Terminal. Just select them according to your purpose.
- DOUBLE-LAYER PCB: The expansion board is a double-layer board. One pin is wired on both sides. Therefore, the circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission.
- UPDATED VERSION: Compared with the previous version, the board of this version has been soldered completely. No need to solder parts by yourself, which is very convenient to use.
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
Dimensions: 0.41 x 3.03 x 2.48 inches
See On Amazon #10
HiLetgo 3pcs ESP32 Mini ESP-WROOM-32 Development Board WLAN WiFi Bluetooth IoT Development Board
Asin: B07BK435ZW | Model: 8541612412 | PartNumber: 8541612412
Input/Output Voltage: Dc 3.3V.
Sram: 520Kb External Flash.
I/O Pins: 34.
Power Supply Voltage: Dc 5V (Usb).
Features
- ESP32 Mini development board, everything needed to program the ESP32 module, ESP32/32S WIFI Development Bluetooth ESP8266 Module CP2104 for Arduino IDE.
- Power supply voltage: DC 5V (USB)
- Input/Output voltage: DC 3.3V
- I/O Pins: 34
- SRAM: 520KB External Flash
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.02 pounds
See On Amazon #11
DORHEA 5Pcs ESP32 Development Board GPIO Breakout Board 30Pin Type-C Micro USB Dual Interface ESP32 Shield 30P Ultra-Low Power Dual Core ESP32-DevKitC-32 ESP-WROOM-32 ESP-32 ESP-32S Expansion Board
Asin: B0B4V73TXQ | Ean: 0701715537903 | UPC: 701715537903
The Breakout Board Is Only Fit For 30Pin Esp32. Please Confirm Your Esp32 Board Pins Width Is Coincide With The Pin Width Of The Breakout Board.
This Module Is Safe, Reliable, And Scalable To A Variety Of Applications. Stable And Highly Reliable.Great Contact And Stable Signal Transmission For Your Esp32 Board.
Esp32 Breakout Board Gpio 1 Into 2 Only Can Compatible With 30 Pins Esp32s Esp32 , Just For Ref Asin: B086mjgfvv B086mlnh7n B086mgh7jv ; B0b18jqf16 B0b18mcyfh B0b18nk2ms.
The Gvs Output Power Supply Can Be 5V Or 3.3V, Which Is More Convenient To Match The External 5V Electronic Module Sensor..
Features
- ESP32 shield 30P expansion board, supports two power supply : DC 6.5-16v and USB 5V
- The GVS output power supply can be 5V or 3.3V, which is more convenient to match the external 5V electronic module sensor.
- The breakout board is only fit for 30PIN ESP32. Please confirm your esp32 board pins width is coincide with the pin width of the breakout board
- ESP32 breakout board GPIO 1 into 2 only can compatible with 30 pins ESP32S ESP32 , just for ref asin: B086MJGFVV B086MLNH7N B086MGH7JV ; B0B18JQF16 B0B18MCYFH B0B18NK2MS
- This module is safe, reliable, and scalable to a variety of applications. Stable and highly reliable.Great contact and stable signal transmission for your esp32 board
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon #12
3 Pcs ESP32 ESP32S Board ESP-WROOM-32 Development Board, Aideepen ESP32S ESP-WROOM-32 Board 2.4GHz Dual-Core Compatible with Arduin, Nodemcu, and MicroPytho
Asin: B0BG5PYDY6
【 Three Modes】Ap, Sta, Ap+Sta Coexistence Mode..
【Why Choose Us】You Can Use It With Our Development Board Asin B0b85bdm9j,Let Your Project More Convenient And Efficient.Aideepen Specializes In Various Electronic Components,Please Feel Free To Contact Us..
【Low Power】Uses 2.4Ghz Dual-Mode Wif, Chip Esp-Wroom-32, And 40Nm Low Power Consumption Technology.Compatible With Arduin, Nodemcu, And Micropytho, Makes Your Development Easier..
【38Pin】Esp32 Cp2102 Chip.It's Easy To Program,Dual-Mode Module Is Compact And Easy To Embed Into Your Device, Convenient To Use..
Features
- ESP-WROOM-32 module ESP32 development board integrates antenna switches, power amplifiers, low noise amplifiers, filters and power management module.
- 38PIN ESP32 CP2102 chip.it's easy to program,dual-mode module is compact and easy to embed into your device, convenient to use.
- Three modes AP, STA, AP+STA coexistence mode.
- Low power uses 2.4GHz dual-mode WiF, chip ESP-WROOM-32, and 40nm low power consumption technology.Compatible with Arduin, Nodemcu, and MicroPytho, makes your development easier.
- Why choose us You can use it with our development board ASIN B0B85BDM9J,let your project more convenient and efficient.Aideepen specializes in various electronic components,please feel free to contact us.
- See more on Amazon...
Brand: Aideepen | Manufacturer: Aideepen
Warranty: 1 year
See On Amazon #13
HiLetgo 3pcs ESP32 S2 Mini WiFi Board Based ESP32-S2FN4R2 ESP32-S2 4MB Flash Type-C Connect
Asin: B0B291LZ99
Type-C Usb Connect.
Based Esp32-S2fn4r2 Wifi Ic.
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #14
HiLetgo ESP32 ESP-32 ESP-32S ESP32S WiFi Bluetooth Wireless Board Module Based ESP-WROOM-32 Dual Core Mode CPU
Asin: B077KJNVFP | Model: 3-01-1483 | PartNumber: 3-01-1483
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 0.55 x 2.24 x 0.98 inches
See On Amazon #15
3 Set ESP32 Development Board Type C 38Pin Narrow Version WiFi + Bluetooth Microcontroller ESP-32 ESP-32S Board ESP-WROOM-32 with ESP32 Breakout Board GPIO 1 into 2 Terminal Screw Board
Asin: B0C8DBN29X | Ean: 0701715539334 | UPC: 701715539334
Esp32s Development Board Support Lua Program, Easy To Develop, Support Of Three Modes: Ap, Sta And Ap + Sta..
The Breakout Board Is Only Fit For 38Pin Narrow Version Esp32 Without Mounting Holes. Notice: Don't Fit With The Esp-Wroom-32 Devkit V1 Version.Please Confirm Your Esp32 Board Pins Width Is Coincide With The Pin Width Of The Breakout Board.
The Esp32 Breakout Board Can Expand One Gpio Pin Of Esp32 Development Board To 2, Convenient To Reuse All Pins In Smart Home Diy Projects..
Esp32 Is A Wifi+Bluetooth Chip Developed. It Is Designed To Provide Access Network Functionality For Embedded Products..
Features
- The esp32s module has 38 pins and has more features than a 30-pin module, narrower width, compatible with breadboard
- ESP32 is a WiFi+Bluetooth chip developed. It is designed to provide access network functionality for embedded products.
- ESP32s development board support Lua program, easy to develop, support of three modes: AP, STA and AP + STA.
- The esp32 breakout board can expand one GPIO pin of esp32 development board to 2, convenient to reuse all pins in smart home DIY projects.
- The breakout board is only fit for 38PIN narrow version ESP32 without mounting holes. Notice: Don't fit with the ESP-WROOM-32 DevKit V1 version.Please confirm your esp32 board pins width is coincide with the pin width of the breakout board
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon #16
HiLetgo 3pcs ESP32 GPIO Board ESP32S Pin Out IO Out 1 into 2 for ESP32 ESP32S Development Board
Asin: B0B56ZY64Q | Model: 3-01-1315 | PartNumber: 3-01-1315
Gpio 1 Into 2.
Esp32 Can Be Connected Through By Pin Header & Screw Terminal.
Features
- 38PIN ESP32 GPIO expansion board
- ESP32 can be connected through by Pin Header & Screw Terminal
- GPIO 1 INTO 2
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 3.07 x 2.48 x 2.48 inches
See On Amazon #17
HiLetgo 2pcs ESP32-DevKitC ESP32-WROOM-32D Core Board ESP32 ESP-32 ESP-WROOM-32D Development Board for Arduino
Asin: B09KLQF4RR | Model: 3-01-1669 | PartNumber: 3-01-1669
Esp32-Devkitc V4 Is A Small-Sized Esp32-Based Development Board..
Most Of The I/O Pins Are Broken Out To The Pin Headers On Both Sides For Easy Interfacing..
Esp32 Esp-32 Esp-Wroom-32D Development Board.
Features
- ESP32-DevKitC ESP32-WROOM-32D Core Board
- ESP32 ESP-32 ESP-WROOM-32D Development Board
- ESP32-DevKitC V4 is a small-sized ESP32-based development board.
- Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #18
HiLetgo 0.96" ESP32 OLED ESP-WROOM-32 ESP32 ESP-32 OLED WiFi Bluetooth Development OLED Display for Arduino AP STA
Asin: B072HBW53G | Model: 8541582783 | PartNumber: 8541582783
Characteristic: Bluetooth Low Power Technology.
Strong Points: A Wide Range Of Safe, Reliable And Scalable Applications For The Tsmc 40Nm Chips.
Characteristics: Using Ap, Sta And Ap And Sta Lua Program Support.
Characteristic: 2.4 Ghz Dual-Mode Wi-Fi.
Features
- Feature: Integrated antenna and RF Barron
- Characteristic: 2.4 GHz dual-mode Wi-Fi
- Characteristic: Bluetooth low power technology
- Characteristics: Using AP, STA and AP and STA LUA program support
- Strong points: A wide range of safe, reliable and scalable applications for the TSMC 40nm chips
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #19
DIYables 38-pin Screw Terminal Adapter for ESP32, 2 Pieces
Asin: B0CFTTVG4P | Model: DIY-SCREW-BOARD-ESP32-38 | PartNumber: DIY-SCREW-BOARD-ESP32-38
Color: Green And Black.
2 Connection Types: Screw Terminal Block And Pin Header. Just Select Them According To Your Needs..
Features
- 2 Pieces of Screw Terminal Adapter for 38-pin ESP32 board
- 2 Connection Types: Screw Terminal Block and Pin Header. Just select them according to your needs.
- Color: green and black
- See more on Amazon...
Brand: DIYables | Manufacturer: DIYables
See On Amazon #20
Alinan 2pcs ESP32 Breakout Board GPIO 1 into 2 Compatible with 38PIN Narrow Version ESP-WROOM-32 ESP32 Microcontroller Development Board
Asin: B0B1HN7ZPC | Model: Alinan | PartNumber: Alinan | Ean: 0701715519022 | UPC: 701715519022
★Only Suitable For 38Pin Narrow Version Esp32 Without Mounting Holes..
★No Need To Connect Parts By Yourself, Which Is Very Convenient To Use..
★Pin Header Or Screw Terminal To Connect. Just Select Them According To Your Purpose..
★Double-Layer Board. One Pin Is Wired On Both Sides. The Circuit Is Stable And Highly Reliable, And There Will Be No Poor Circuit Contact And Unstable Signal Transmission..
Features
- Can expand one GPIO pin of esp32 development board to two, which is convenient for users to reuse all pins in smart home projects.
- Double-layer board. One pin is wired on both sides. The circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission.
- Only suitable for 38PIN narrow version ESP32 without mounting holes.
- Pin Header or Screw Terminal to connect. Just select them according to your purpose.
- No need to connect parts by yourself, which is very convenient to use.
- See more on Amazon...
Brand: Alinan | Manufacturer: Alinan
See On Amazon
Looking For Something Else?
Search