80mm Hole Saw,Drill Bit,LAIWEI Hole Saw Heavy Duty Mandrel Hole Cutter for Drilling Wood,Thin Metal Sheet, Aluminum Profile, PVC and Other Materials,Electric Drill Tool(3-5/32(80mm))
Asin: B09WHHNKL5 | Model: A2----KKQ | PartNumber: A2----KKQ | Ean: 0796917903953 | UPC: 796917903953
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Feature 1】 Laiwei Hole Saw Adopts High-Quality M42 Steel And Hss High-Speed Steel, Which Is Sharp And Durable, And The Cutting Is Clean And Smooth. [2] The Hss Center Drill Is Equipped With A Spring That Pushes The Chips Out, Reducing The Time And Effort To Remove Residue, Reducing Shock When Drilling, And Preventing Damage To The Insert And Hole..
【Note】Start Hole Saw Cutting With Low Speed Rotation. Be Sure To Use Perpendicular To The Member. Do Not Tilt The Drill In The Middle. When Cutting Metal, Sprinkle Cutting Oil Or Water On It. Wear Protective Equipment Such As Goggles And Masks When Using..
【Usage】Electric Drill: Used For Drilling Gypsum Board, Plastic, Wood, Plywood, Thin Iron Plate, Thin Stainless Steel Plate, Thin Aluminum Plate, Etc. It Is Used For Plumbing Work, Electrical Work And All Kinds Of Drilling Work, From Professional Workplaces To The Spread Of Do-It-Yourself And Diy. [Compatible Models] Electric Drill, Cordless Electric Drill Driver. If Precision Is Required, Use A Drill Or Drill Stand To Drill Holes..
[Material] The Bimetal Drill Blade Is Made Of High-Quality Hss High-Speed Steel, Which Is Sharp, Corrosion-Resistant, Wear-Resistant And Durable. Center Drills And Tool Holders Are Made Of High Quality M42 Steel For Excellent Machinability And Toughness..
Features
- Use of A2 Hole Saw Mandrel This 80mm hole saw (3.15inch hole saw) adopts A2 heavy duty mandrel, this mandrel is suitable for bi-metal hole saw: 60mm to 360mm. Locking Pin Design: The pin locks the saw in place to prevent over-tightening and thread loss. Safety lock design, easy to disassemble. No tools required, easy to put on and take off. You can set inset screws for quick and easy center bit replacement.
- [Material] The bimetal drill blade is made of high-quality HSS high-speed steel, which is sharp, corrosion-resistant, wear-resistant and durable. Center drills and tool holders are made of high quality M42 steel for excellent machinability and toughness.
- Feature 1 LAIWEI hole saw adopts high-quality M42 steel and HSS high-speed steel, which is sharp and durable, and the cutting is clean and smooth. [2] The HSS center drill is equipped with a spring that pushes the chips out, reducing the time and effort to remove residue, reducing shock when drilling, and preventing damage to the insert and hole.
- Usage Electric drill: used for drilling gypsum board, plastic, wood, plywood, thin iron plate, thin stainless steel plate, thin aluminum plate, etc. It is used for plumbing work, electrical work and all kinds of drilling work, from professional workplaces to the spread of do-it-yourself and DIY. [Compatible models] Electric drill, cordless electric drill driver. If precision is required, use a drill or drill stand to drill holes.
- Note Start hole saw cutting with low speed rotation. Be sure to use perpendicular to the member. Do not tilt the drill in the middle. When cutting metal, sprinkle cutting oil or water on it. Wear protective equipment such as goggles and masks when using.
- See more on Amazon...
Brand: Laiwei | Manufacturer: LAIWEI
See On Amazon Similar To 80mm Hole SawDrill BitLAIWEI Hole
#1
PETUOL Hole Saw Set, 22PCS Hole Saw Kit with 3/4" to 5" (19mm-127mm) 13Pcs Saw Blades, Mandrels, Installation Plate, Drill Bits, Hex Key with Storage Box, Ideal for Soft Wood, Plywood, Drywall, PVC
Asin: B086D57RPK | Ean: 0658906650951 | UPC: 658906650951
Easy To Install: Quickly And Easily Replace All Tools Needed For The Saw. The Set Included Hex Wrench And Mounting Plate For Tool Installation..
Portable Storage Case: The Set Comes With A Customized Case For Portability. Designated Slots In The Case Keep Every Piece In Place. Keep Fittings Tidy And Improve Work Efficiency. Perfect Gift For Father’S Day!.
Wide Application Scenarios: Upgraded Design With Ultra-Sharp Serrations For Faster And Cleaner Cutting, Which Is Ideal For Softwood, Plastic Plate, Plasterboard And Thin Pvc Board. The Cutting Depth Is About 25 Mm..
Professional Quality: Made Of Premium Heat-Treated Carbon Steel With Anti-Oil And Anti-Rust Features For High Performance, Anti-Rust, Durability, And Longer Service Life. Not Hard Metal Suitable Or Hard Materials!.
Features
- PACKAGE INCLUDES: Hole saw kit includes 13pcs saw blades, 3/4" (19mm), 7/8" (22mm), 1"(25mm), 1-1/8" (28mm), 1-1/4" (32mm),1-1/2" (38mm),1-3/4" (44mm), 2" (51mm),2-1/2" (64mm), 3in(76mm), 3-1/2" (89mm), 3.9" (101mm), 5" (127mm) 2x Mandrels, 2x Drill Bits, 2 x Twist drill, 1 x Hex Key, 1x Package Box Installation Plate and Hex Key with Storage Box.
- PROFESSIONAL QUALITY: Made of premium heat-treated carbon steel with anti-oil and anti-rust features for high performance, anti-rust, durability, and longer service life. Not hard metal suitable or hard materials!
- EASY TO INSTALL: Quickly and easily replace all tools needed for the saw. The set included hex wrench and mounting plate for tool installation.
- WIDE APPLICATION SCENARIOS: Upgraded design with ultra-sharp serrations for faster and cleaner cutting, which is ideal for softwood, plastic plate, plasterboard and thin PVC board. The cutting depth is about 25 mm.
- PORTABLE STORAGE CASE: The set comes with a customized case for portability. Designated slots in the case keep every piece in place. Keep fittings tidy and improve work efficiency. Perfect gift for Father s Day!
- See more on Amazon...
Brand: PETUOL | Manufacturer: PETUOL
Dimensions: 1.90 x 8.60 x 6.20 inches
See On Amazon #2
Hole Saw Drill Bit LAIWEI HSS Hole Cutter with Arbor for Wood,PVC Board and Plasterboard(3-5/32"(80mm Hole Saw))
Asin: B07R8YGJCT | Model: 21-SJJKKQ | PartNumber: 21-SJJKKQ | Ean: 0791280334885 | UPC: 791280334885
Brand: Laiwei | Manufacturer: LAIWEI
See On Amazon #3
M42 HSS Hole Saw Set, Ankoow 9Pcs 16-38mm Heavy Duty Hole Saw Tooth Cutting Opener Drill Bit for Wood Aluminum Iron Sheet Pipe Plastic
Asin: B01LS94FCK | Model: FBA_M42-RD-9 | PartNumber: FBA_M42-RD-9 | Ean: 0700516313761 | UPC: 700516313761
[Wide Application]: Suitable For Pistol Drill, Bench Drill,Vertical Drilling Machine Etc. Widely Used In Plate Hole, Home Wood, Galvanized Pipe, Fire Pipe, Plastic, Soft Metal, Gypsum Board And Other Opening Operation. Note: Not Recommend Used In Hard Wood, Hard Metal And Stone..
[Warm Tips]: Keep The Hole Saw Drill Bit Be Stable When, The Larger The Hole Saw Is, The Slower The Drill Rotary Speed Should Be, This Way Can Protect The Centre Bit From Getting Snapped. And We Recommend That Customers Use Cutting Fluid To Keep The Hole Saw Cold During Use To Prevent Overheating, Damage Or Even Burned Up..
[Smooth And Fast Cutting]: Teeth Are Sharp With Little Vibration, Pressurized Spring Improves The Removal Speed Of Cylindrical Iron Filler In The Hole And Makes Chip Evacuation Easier. And The Hole Saw Kit Can Be Quickly Balanced, Making The Operation More Stable..
[High-Quality Materials]: Hole Saw Set Made Of M42 Hss Steel And Bi Metal, The Blade Is Sharp With High Hardness, Stronger Wear Resistence And Long Service Life..
Features
- [9 SIZES HOLE SAW IN 1 SET]: 16mm, 18mm, 20mm, 22mm, 25mm, 30mm, 32mm, 35mm, 38mm. Each hole saw drill bit is individually packaged for easy carrying and finding the required specifications.
- [HIGH-QUALITY MATERIALS]: Hole saw set made of M42 HSS steel and BI metal, the blade is sharp with high hardness, stronger wear resistence and long service life.
- [WIDE APPLICATION]: Suitable for Pistol Drill, Bench Drill,Vertical Drilling Machine etc. Widely used in Plate Hole, Home Wood, Galvanized Pipe, Fire Pipe, Plastic, Soft metal, Gypsum Board and Other Opening Operation. NOTE: Not recommend used in hard wood, hard metal and stone.
- [SMOOTH AND FAST CUTTING]: Teeth are sharp with little vibration, pressurized spring Improves the removal speed of cylindrical iron filler in the hole and makes chip evacuation easier. And the hole saw kit can be quickly balanced, making the operation more stable.
- [WARM TIPS]: Keep the hole saw drill bit be stable when, the larger the hole saw is, the slower the drill rotary speed should be, this way can protect the centre bit from getting snapped. And we recommend that customers use cutting fluid to keep the hole saw cold during use to prevent overheating, damage or even burned up.
- See more on Amazon...
Brand: Ankoow | Manufacturer: Ankoow
Dimensions: 0.98 x 0.00 x 1.50 inches
See On Amazon #4
Mollom (3-1/8''|80mm) Heavy Duty Carbide Hole Saw with 2 Pilot Drill Bits, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic
Asin: B09SL2BWYW | Model: CHS180 | PartNumber: CHS180
✔️┋【Extremely Long Life】Carbide Hole Saw Last 10X Long Life Over Standard Bi-Metal Hole Saw, And Even Can Bore Up To 0.1 Inch Thick Stainless Steel..
✔️┋【Package】Include 1Pcs T.C.T Hole Saw,1Pcs Titanium-Plated Pilot Drill Bit & 1Pcs Step Pilot Drill Bit，Each Hole Cutters Are Individually Cased In Plastic Box And Each Bit Is Also Oiled (Prevent Rust)..
✔️┋【Multipurpose Tools】This Carbide Hole Saw Apply To Bench Drill, Magnetic Drill, Gun Drill, Drill Percussion And So On. Perfect For Hard Metal, Stainless Steel Plate, Square Tube, Iron, Cast Iron, Wood, F.R.P And Other General Sheet Metal；Note: Cannot Be Used For Concrete, Tiles And Stone..
✔️️┋【Perfect Cutting】The Spring Loaded Pilot Bit Ejects The Cut Slug, Saving Time. The Cutter Body Then Cuts A Clean, Burr-Free Hole Faster Than Conventional Twist Drills Or Hole Saws..
✔️┋【High Quality Material】Made From High Quality Tct Carbide( Tungsten Carbide Tipped Cutters), High-Grade Titanium-Plated Cemented Carbide Tooth, Ensuring Its High Hardness, Rust Proof, Sturdy And Durable..
✔️┋【Dimension】Cutting Dia: 3-1/8'' | 80Mm;Shank Dia: 10Mm | 3/8" ;Hole Saw Depth : 25Mm | 1".
Features
- More Teeth Includes 18 tungsten steel teeth for faster cutting. The tungsten steel blades ensures superior wear resistance, making the hole saw suitable for heavy-duty use. Whether tackling demanding construction projects or everyday tasks, you can trust in the durability of our product.
- Dimension Cutting Dia: 3-1/8'' | 80mm;Shank Dia: 10mm | 3/8 ;Hole Saw Depth : 25mm | 1
- Extremely Long Life Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel.
- High Quality Material Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable.
- Multipurpose Tools This Carbide Hole saw apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal Note: Cannot be used for concrete, tiles and stone.
- Perfect Cutting The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws.
- Package Include 1pcs T.C.T Hole Saw,1pcs Titanium-Plated Pilot Drill bit & 1pcs Step Pilot Drill bit each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust).
- See more on Amazon...
Brand: Mollom | Manufacturer: MOLLOM
Dimensions: 0.04 x 3.13 x 3.13 inches
See On Amazon #5
Mollom TCT Carbide Hole Saw Kit for Hard Metal (16-53mm), 10Pcs Hole Cutters with 5Pcs Extra Pilot Drill bits and 3Pcs Hex Keys for Stainless Steel, Iron,Aluminum,Alloy,Metal.
Asin: B0B9GVQR6K | Model: CHS101653 | PartNumber: CHS101653
【Wide Application】Widely Used In Stainless Steel Plate, Hard Metal, Iron, Mild Steel, Alloy Steel, Aluminum, Frp, And Plastic To Drilling Holes. ***Not Recommended For Tile, Glass, Concrete, Stone..
【Multi-Purpose Tools】Suitable For Hand Held Electric Drill, Stand Motor-Driven Drilling Machine And Mobile Ribbon Type Magnetism Drilling Machine.Heavy Usage On Industrial Plants, E.G. Applications In Heating, Ventilation And Air Conditioning Demand An Enduring Hole Saw That Delivers A Precise Cut Into High Quality Stainless Steel..
【Packing Includes】This Hole Saw Set Includes : 10Pcs T.C.T Hole Saws: 5/8 Inch(16Mm)，11/16 Inch(18Mm), 25/32 Inch(20Mm), 7/8 Inch(22Mm), 1 Inch(25.5Mm), 1-3/16 Inch(30Mm), 1-3/8 Inch(35Mm), 1-3/4 Inch(45Mm), 2 Inch(50Mm), 2-1/16 Inch(53Mm), 5Pcs Extra Pilot Drill Bits And 3Pcs Hex Keys..
【Precise Dimensions】All Model Sizes Correspond To The Actual Diameter Of The Opening. We Have Recalculated The Data Between Inches And Mm To Make The Actual Opening Size Closer To The Customer's Requirements..
【Ultra Sharp】The Saw Blade Is Extremely Sharp, Low Consumption, Durable, Impact Resistance And Wear Resistance.Smooth Cut With Perfect Cutting Quality For Every Hole..
Features
- High Quality The hole cutter made of industrial grade metal , high-grade Titanium-plated cemedted carbide tooth, ensuring its high hardness ,rust proof,sturdy and durable.
- Ultra Sharp The saw blade is extremely sharp, low consumption, durable, impact resistance and wear resistance.Smooth cut with perfect cutting quality for every hole.
- Wide Application Widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP, and plastic to drilling holes. ***Not recommended for tile, glass, concrete, stone.
- Precise Dimensions All model sizes correspond to the actual diameter of the opening. We have recalculated the data between inches and mm to make the actual opening size closer to the customer's requirements.
- Multi-purpose Tools Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.Heavy usage on industrial plants, e.g. applications in heating, ventilation and air conditioning demand an enduring hole saw that delivers a precise cut into high quality stainless steel.
- Packing Includes This hole saw set includes : 10Pcs T.C.T hole saws: 5/8 inch(16mm) 11/16 inch(18mm), 25/32 inch(20mm), 7/8 inch(22mm), 1 inch(25.5mm), 1-3/16 inch(30mm), 1-3/8 inch(35mm), 1-3/4 inch(45mm), 2 inch(50mm), 2-1/16 inch(53mm), 5Pcs extra pilot drill bits and 3Pcs hex keys.
- See more on Amazon...
Brand: Mollom | Manufacturer: Mollom
Dimensions: 3.10 x 11.80 x 9.40 inches
See On Amazon #6
Hordion 80mm 3.15 inch Hole Saw, Heavy Duty Bi-Metal Hole Saws Bit Tooth Cutting for Cornhole Boards Drywall Wood Plastic Fiberboard Soft Metal
Asin: B08L4CQ5WK | Model: ZC0223 | PartNumber: ZC0223 | Ean: 0779640680841 | UPC: 779640680841
Clean Edge Design: The Hole Saw Uses A Non-Binding Clean Edge Design, Which Cuts Smoothly And Easily. After Drilling The Hole, The Spring On The Drill Bit Will Automatically Push The Disc Out Of The Saw.
Worry-Free Shopping: Customer Satisfaction Is One Of Our Top Priorities. If You Have Any Questions About The Product, We Will Provide You With A Satisfactory Solution As Soon As Possible..
Widely Used: Suitable For Pistol Drill, Bench Drill, Vertical Drilling Machine, Etc. Widely Used In Hole Openings For Corn Hole Board, Board Holes, Household Wood, Galvanized Pipes, Fire Hoses, Plastics, Gypsum Boards, Air Ducts, Speakers And Other Opening Operations.
Sharp Teeth: The Teeth Are Sharp, The Vibration Is Small, More Stable Operation, And Can Cut Holes Quickly And Balancedly.
Features
- Professional Cutting: This 80mm hole saw is designed for wood / plastic cutting. Very suitable for making Cornhole Boards
- Sharp Teeth: The teeth are sharp, the vibration is small, more stable operation, and can cut holes quickly and balancedly
- Clean Edge Design: The hole saw uses a non-binding clean edge design, which cuts smoothly and easily. After drilling the hole, the spring on the drill bit will automatically push the disc out of the saw
- Widely Used: Suitable for pistol drill, bench drill, vertical drilling machine, etc. Widely used in hole openings for corn hole board, board holes, household wood, galvanized pipes, fire hoses, plastics, gypsum boards, air ducts, speakers and other opening operations
- Worry-free Shopping: Customer satisfaction is one of our top priorities. If you have any questions about the product, we will provide you with a satisfactory solution as soon as possible.
- See more on Amazon...
Brand: Hordion | Manufacturer: Hordion
See On Amazon #7
Rannb Hole Saw Drilling Cutter Tool for Wood Material 80mm/3.15" Cutting Dia
Asin: B07ZPQ68B3 | Model: wby1578 | PartNumber: wby1578 | Ean: 0793610769329 | UPC: 793610769329
⭐【Sharp Teeth】The Teeth Is Sharp And Vibarition Is Less, Which Enable More Stable Operation And Make The Hole Can Be Cut With Quick Speed And Balance..
⭐【Spring Loaded Design】The Spring On The Drill Bit Is Nice Because It Automatically Pushes The Disc Out Of The Saw Immediately After Completing The Hole..
⭐【Package Content】1Pcs X Shank + 1Pcs X Hole Saw + 3Pcs X Pilot Drill Bit + 1Pcs X Small L Wrench.
⭐【Dimension】Cutting Dia: 80Mm/3.15"; Shank Dia: 10Mm/0.4"; Cutting Depth: 25Mm/1".
Features
- Material The hole saw is made of M42 BI-metal, durable and rust-proof.Non-binding clean edge design.
- Dimension Cutting Dia: 80mm/3.15; Shank Dia: 10mm/0.4; Cutting Depth: 25mm/1
- Sharp Teeth The teeth is sharp and vibarition is less, which enable more stable operation and make the hole can be cut with quick speed and balance.
- Package Content 1pcs x Shank + 1pcs x Hole Saw + 3pcs x Pilot Drill Bit + 1pcs x Small L Wrench
- Spring Loaded Design The spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole.
- See more on Amazon...
Brand: Rannb | Manufacturer: Raanb
See On Amazon #8
SALI 3-5/16"(84mm) TCT Hole Saw Kit Tungsten Carbide Tipped Hole Saw Drill Bit with Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, Plastic
Asin: B0CG91XMLZ
Unique Three-Blade Design This Tct Hole Saw Teeth Designed With Three-Blade, Include Outer Blade, Middle Blade, And Inner Blade, Making It Sharper And More Efficient, Ideal For Cutting Hard Metals.
Reminder: For Safety Purposes, Remember To Add Coolant During Continuous High-Speed Drilling, And Please Wear Protective Goggles And Gloves When Using Our Hole Saw Set.
Multipurpose Tools:This Hole Saw Set Apply To Bench Drill, Magnetic Drill, Gun Drill, Drill Percussion And So On. Perfect For Hard Metal, Stainless Steel Plate, Square Tube, Iron, Cast Iron, Wood, F.R.P And Other General Sheet Metal；Note: Cannot Be Used For Concrete, Tiles And Stone.
Material Made From High Quality Tct Carbide( Tungsten Carbide Tipped Cutters), High-Grade Titanium-Plated Cemented Carbide Tooth, Ensuring Its High Hardness, Rust Proof, Sturdy And Durable.
Features
- Size cutting diameter 3-5/16"(84mm) cutting depth: 1 inch 60mm , shank dia.: 3/10 inch(8mm), perfect for drilling hard metal
- Material made from high quality tct carbide( tungsten carbide tipped cutters), high-grade titanium-plated cemented carbide tooth, ensuring its high hardness, rust proof, sturdy and durable
- Unique three-blade design this tct hole saw teeth designed with three-blade, include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals
- Multipurpose tools:This hole saw set apply to bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, f.r.p and other general sheet metal note: Cannot be used for concrete, tiles and stone
- Reminder: For safety purposes, remember to add coolant during continuous high-speed drilling, and please wear protective goggles and gloves when using our hole saw set
- See more on Amazon...
Brand: SALI | Manufacturer: SALITools
See On Amazon #9
ASNOMY 3-1/8Inch (80mm) Diamond Hole Saw with Pilot Drill Bit, 3-1/8" Diamond Tip Coated Hole Saw with Guiding Drill Bit for Glass Ceramic Marble Porcelain Tile Granite Quartz
Asin: B0C68K9BZZ
【Size】Cutting Dia.：3-1/8Inch (80Mm), Cutting Depth: 1-3/16Inch(30Mm), Total Length: 2-3/4Inch (70Mm),Triangular Shank Dia.: 3/8Inch(9.5Mm)..
【Easy To Use】The Operation Is Simple, Without The Need For Other Special Guide Tools. Use The Tile Hole Saw Installed With The Positioning Drill Bit To Position The Hole, Remove The Positioning Drill Bit After Positioning, And Then Directly Cutting The Hole With The Tile Hole Saw. Note: During The Cutting Process, Remember To Add Water Or Coolant To Extend The Life Of The Diamond Hole Saw..
【Package】Include 1Pc Diamond Hole Saw Cutter ,1Pc Positioning Pilot Drill Bit And 1Pc Wrench，Each Diamond Hole Cutters Set Are Individually Cased In Plastic Box And Each Bit Is Also Oiled (Prevent Rust)..
【Sharp & Clean Holes】This Diamond Tile Core Drill Bits With Thicker Diamond Coating Make The Edge Of The Groove Sharper, Can Cutting Precise Flat Bottom Holes With No Chipping On Smooth Surfaces, Such As Ceramic Tiles, Ceramics, Glass, Marble, Granite And Terrazzo.(Cutting Depth Up To 1-3/16Inch).
【Accurate Positioning Pilot Bit Design】Each Tile Hole Saw Is Designed With A Detachable Positioning Pilot Drill Bit, And The Cutter Head Of The Pilot Drill Bit Is Also Designed With Diamond Coating, Which Makes It Sharper And More Durable, And Efficiently Fixes The Drilling Position Of The Hole Saw To Cutting Holes Quickly..
Features
- Top Quality Our glass hole saw with Positioning pilot bit is made of high-quality diamond, solid hardened steel body, and the surface is designed with nickel-plated coating, ensuring its high hardness, rust proof, anti-corrosion, sturdy and durable.
- Accurate Positioning Pilot bit Design Each tile hole saw is designed with a detachable Positioning pilot drill bit, and the cutter head of the pilot drill bit is also designed with diamond coating, which makes it sharper and more durable, and efficiently fixes the drilling position of the hole saw to cutting holes quickly.
- Size Cutting Dia. 3-1/8Inch (80mm), Cutting Depth: 1-3/16Inch(30mm), Total length: 2-3/4Inch (70mm),Triangular Shank Dia.: 3/8Inch(9.5mm).
- Sharp & Clean Holes This diamond Tile Core drill bits with thicker diamond coating make the edge of the groove sharper, can cutting precise flat bottom holes with no chipping on smooth surfaces, such as ceramic tiles, ceramics, glass, marble, granite and terrazzo.(Cutting depth up to 1-3/16Inch)
- Easy to Use The operation is simple, without the need for other special guide tools. Use the tile hole saw installed with the positioning drill bit to position the hole, remove the positioning drill bit after positioning, and then directly cutting the hole with the tile hole saw. Note: During the cutting process, remember to add water or coolant to extend the life of the diamond hole saw.
- Package Include 1pc Diamond Hole Saw Cutter ,1pc positioning pilot drill bit and 1pc wrench each Diamond hole cutters set are individually cased in plastic box and each bit is also oiled (Prevent rust).
- See more on Amazon...
Brand: ASNOMY | Manufacturer: ASNOMY
See On Amazon #10
Luomorgo 80mm/3.15 inch Diamond Hole Saw, 1.1 inch Cutting depth Diamond Diamond Drill Bits for Glass Ceramic Marble Porcelain Tile Granite Quartz Gemstone
Asin: B095Y3S72X | Model: HAO01919 | PartNumber: HAO01919 | Ean: 0779640676073 | UPC: 779640676073
High-Performance Materials: The Glass Hole Cutter Is Made Of High-Quality Iron Alloy, Which Is Very Sturdy And Durable. At The Same Time, The Surface Is Nickel-Plated, Which Has Good Rust Resistance, Corrosion Resistance And Prolonged Service Life.
100% Risk-Free Shopping: If You Are Not Satisfied With Any Luomorgo Products, We Have Nothing To Ask And Let You Enjoy A Full Refund. Because We Want Our Customers To Enjoy A 100% Satisfied Shopping Experience..
Efficient & Smooth Cutting: The High-Quality Diamond Drill Bits With Thicker Diamond Coating Make The Edge Of The Groove Sharper, Which Can Achieve Smooth And High-Precision Cutting. Large Chip Holes On The Side Can Remove Waste, Ensuring Smooth And Accurate Punching.
Cutting Hole Diameter: 3.15" / 80Mm; Cutting Depth: 1.1" / 28Mm; Shank Diameter: 0.39" / 10Mm; Shank Height: 1" / 25Mm.
Features
- Package Includes: 1 x 3.15 inch diamond hole saw, 80mm diamond-coated hole saw, suitable for drilling holes in glass, marble, pocelain, fiberglass, slate, light stone, ceramic tiles or granite
- Cutting Hole Diameter: 3.15 / 80mm; Cutting Depth: 1.1 / 28mm; Shank Diameter: 0.39 / 10mm; Shank Height: 1 / 25mm
- High-Performance Materials: The glass hole cutter is made of high-quality iron alloy, which is very sturdy and durable. At the same time, the surface is nickel-plated, which has good rust resistance, corrosion resistance and prolonged service life
- Efficient & Smooth Cutting: The high-quality diamond drill bits with thicker diamond coating make the edge of the groove sharper, which can achieve smooth and high-precision cutting. Large chip holes on the side can remove waste, ensuring smooth and accurate punching
- 100% Risk-Free Shopping: If you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want our customers to enjoy a 100% satisfied shopping experience.
- See more on Amazon...
Brand: Luomorgo | Manufacturer: Luomorgo
See On Amazon #11
90mm Hole Saw, Bi-Metal Drill Bit, LAIWEI Hole Saw Heavy Duty Mandrel Hole Cutter for Drilling Wood, Thin Metal Sheet, Aluminum Profile, PVC and Other Materials, Electric Drill Tool (1, 3-9/16(90mm))
Asin: B09WHFKNXW | Model: A2----KKQ | PartNumber: A2----KKQ | Ean: 0796917358296 | UPC: 796917358296
【Feature 1】 Laiwei Hole Saw Adopts High-Quality M42 Steel And Hss High-Speed Steel, Which Is Sharp And Durable, And The Cutting Is Clean And Smooth. [2] The Hss Center Drill Is Equipped With A Spring That Pushes The Chips Out, Reducing The Time And Effort To Remove Residue, Reducing Shock When Drilling, And Preventing Damage To The Insert And Hole..
【Note】Start Hole Saw Cutting With Low Speed Rotation. Be Sure To Use Perpendicular To The Member. Do Not Tilt The Drill In The Middle. When Cutting Metal, Sprinkle Cutting Oil Or Water On It. Wear Protective Equipment Such As Goggles And Masks When Using..
【Usage】Electric Drill: Used For Drilling Gypsum Board, Plastic, Wood, Plywood, Thin Aluminum Plate, Etc. It Is Used For Plumbing Work, Electrical Work And All Kinds Of Drilling Work, From Professional Workplaces To The Spread Of Do-It-Yourself And Diy. [Compatible Models] Electric Drill, Cordless Electric Drill Driver. If Precision Is Required, Use A Drill Or Drill Stand To Drill Holes..
[Material] The Bimetal Drill Blade Is Made Of High-Quality Hss High-Speed Steel, Which Is Sharp, Corrosion-Resistant, Wear-Resistant And Durable. Center Drills And Tool Holders Are Made Of High Quality M42 Steel For Excellent Machinability And Toughness..
Features
- Use of A2 Hole Saw Mandrel This 90mm hole saw adopts A2 heavy duty mandrel, this mandrel is suitable for bi-metal hole saw: 60mm to 360mm. Locking Pin Design: The pin locks the saw in place to prevent over-tightening and thread loss. Safety lock design, easy to disassemble. No tools required, easy to put on and take off. You can set inset screws for quick and easy center bit replacement.
- [Material] The bimetal drill blade is made of high-quality HSS high-speed steel, which is sharp, corrosion-resistant, wear-resistant and durable. Center drills and tool holders are made of high quality M42 steel for excellent machinability and toughness.
- Feature 1 LAIWEI hole saw adopts high-quality M42 steel and HSS high-speed steel, which is sharp and durable, and the cutting is clean and smooth. [2] The HSS center drill is equipped with a spring that pushes the chips out, reducing the time and effort to remove residue, reducing shock when drilling, and preventing damage to the insert and hole.
- Usage Electric drill: used for drilling gypsum board, plastic, wood, plywood, thin aluminum plate, etc. It is used for plumbing work, electrical work and all kinds of drilling work, from professional workplaces to the spread of do-it-yourself and DIY. [Compatible models] Electric drill, cordless electric drill driver. If precision is required, use a drill or drill stand to drill holes.
- Note Start hole saw cutting with low speed rotation. Be sure to use perpendicular to the member. Do not tilt the drill in the middle. When cutting metal, sprinkle cutting oil or water on it. Wear protective equipment such as goggles and masks when using.
- See more on Amazon...
Brand: Laiwei | Manufacturer: LAIWEI
See On Amazon #12
80mm Hole Cutter TCT Carbide Hole Saw KKMOSS Stainless Steel Drill bit Tungsten Alloy Hole Drill Cutting Diameter 3-5/32 Hole Saw
Asin: B09228ZLRW | Model: YZHJ | PartNumber: YZHJ | Ean: 0796917612367 | UPC: 796917612367
⭐ Hole Drills --- Spring-Guided Drills Remove Chips And Save Time. Second, The Cutter Body Cuts Clean, Burr-Free Holes Faster Than Traditional Twist Drills And Hole Saws..
⭐ Carbide Hole Punch --- Under Normal Conditions, This Tool Will Last Longer Than Other Punch Tools.A Bench Drill Is Recommended To Ensure Stable Work. Rotational Instability During Drilling Has The Potential To Damage The Drill Bit..
⭐ Stainless Steel Bits --- High Quality Twist Bits, Fast Drilling, Sharp, Durable And Accurate.
⭐Hole Saw --- Carbide Blade Can Cut Steel, Iron, Aluminum, Copper And Cast Iron. Best Of All, Stainless Steel And Other Metals Can Be Cut To A Depth Of 25Mm..
Features
- 80mm Hole Cutter --- KKMOSS Carbide Hole Saw (3-5/32 hole saw) is a great alternative to traditional bi-metal hole saws. They are faster, cleaner and last longer. Pull the chainsaw and say goodbye to burning. Try T.C.T. You'll love it.
- Hole Saw --- Carbide blade can cut steel, iron, aluminum, copper and cast iron. Best of all, stainless steel and other metals can be cut to a depth of 25mm.
- Hole Drills --- Spring-guided drills remove chips and save time. Second, the cutter body cuts clean, burr-free holes faster than traditional twist drills and hole saws.
- Stainless Steel Bits --- High Quality Twist Bits, Fast Drilling, Sharp, Durable and Accurate
- Carbide Hole Punch --- Under normal conditions, this tool will last longer than other punch tools.A bench drill is recommended to ensure stable work. Rotational instability during drilling has the potential to damage the drill bit.
- See more on Amazon...
Brand: KKMOSS | Manufacturer: KKMOSS
See On Amazon #13
LC LICTOP 80mm/3.15" BI -Metal Hole Saws Bit Tooth Cutting for Cornhole Board Wood Metal Plastic Fiberboard,Green
Asin: B07ZVJG39C | Model: LXMY1976 | PartNumber: LXMY1976 | Ean: 0778601984196 | UPC: 778601984196
Product Size: Cutting Diameter: 80Mm/3.15"; Cutting Depth: 32Mm / 1.3"; Shank Diameter: 10Mm / 0.4"; Total Length Of Shank: 97Mm / 3.8".
Product Application: It Is Very Suitable For Corn Hole Drilling And Other Household Projects, Such As Corn Hole, Bean Bag Board, Speaker, Duct, Wood, Gypsum Board And Thin Metal..
Product Features: With The Non-Binding Clean Edge Design, This Hole Saw Cuts Smooth And Easy. The Spring On The Drill Would Automatically Pushes The Disc Out Of The Saw Immediately After Completing The Hole..
Product Material: Made Of M42 Alloy Material, Which Has A Longer Service Life Than Other Materials. High Hardness, Durable And Rust-Proof..
Features
- Product Contain: 1 Set 80mm/3.15" M42 Bi-Metal Hole Saw; Color: Green
- Product Material: Made of M42 alloy material, which has a longer service life than other materials. High hardness, durable and rust-proof.
- Product Size: Cutting Diameter: 80mm/3.15; Cutting Depth: 32mm / 1.3; Shank Diameter: 10mm / 0.4; Total Length of Shank: 97mm / 3.8
- Product Features: With the non-binding clean edge design, this hole saw cuts smooth and easy. The spring on the drill would automatically pushes the disc out of the saw immediately after completing the hole.
- Product Application: It is very suitable for corn hole drilling and other household projects, such as corn hole, bean bag board, speaker, duct, wood, gypsum board and thin metal.
- See more on Amazon...
Brand: LC LICTOP | Manufacturer: LC LICTOP
See On Amazon #14
Auniwaig 80mm/3.12" Bi-Metal Hole Saw 25mm/1" Deep Bimetal Hole Cutter HSS Drill Bit for Cutting Metal Wood Plastic
Asin: B08SJY3MH8 | Model: CU6440S2511HF | PartNumber: CU6440S2511HF | Ean: 0889575493857 | UPC: 889575493857
【Efficient & Smooth Cutting】- High-Quality Bi-Metal And The Best Cutting Performance Of Hss Teeth Combines With Non-Binding Clean Edge Design Ensures Smooth And Clean Cutting Of The Hole Saw Blade..
【Warm Prompt】- Keep The Drill Bit In Contact With The Cutting Surface Straight At A Low Speed. Take Some Time For The Saw To Cut, So You Can Get A Smooth And Clean Round Cut; The Cutting Depth Is 25Mm;Product Contain:1 * Hole Saw & 1 * Mandrel And Drill Bit..
【Widely Used】- Hole Saws Can Cut 3.12" Diameter Holes In Wood, Plywood, Plastic, Drywall, Soft Plaster, Cornhole Boards And Thin Metals. In Addition To Punching Cans Or Recessed Lights, Punching Saws Are Also Suitable For Home Projects On Air Ducts, Speakers, Ceiling Lamps, Etc..
【High-Performance Materials】- Hole Saws Is Made Of M42 High-Speed Steel And Bi Metal, With Higher Hardness Higher Toughness, Higher Cutting Strength And Stronger Wear Resistance..
Features
- CONSTRUCTION GRADE - Cutting Diameter: 80mm/3.12"; Opening Depth: 25mm/0.98"; Handle Diameter: 10mm/0.39"; Hole Saw is made of HSS M42 & high speed steel, impact resistance, wear resistance. With higher hardness, higher toughness and stronger resistance; Well made, sharp, hard, lasting. Comes with drill bit hardware.
- HIGH-PERfORMANCE MATERIALS - Hole saws is made of M42 high-speed steel and BI metal, with higher hardness higher toughness, higher cutting strength and stronger wear resistance.
- EFFICIENT & SMOOTH CUTTING - High-quality bi-metal and the best cutting performance of HSS teeth combines with Non-binding clean edge design ensures smooth and clean cutting of the hole saw blade.
- WIDELY USED - Hole saws can cut 3.12 diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc.
- WARM PROMPT - Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut; the cutting depth is 25mm;Product Contain:1 * Hole Saw & 1 * Mandrel and Drill bit.
- See more on Amazon...
Brand: Auniwaig | Manufacturer: Auniwaig
Dimensions: 0.10 x 3.12 x 1.00 inches
See On Amazon #15
120mm Hole Saw,Drill Bit,LAIWEI Hole Saw Heavy Duty Mandrel Hole Cutter for Drilling Wood,Thin Metal Sheet, Aluminum Profile, PVC and Other Materials,Electric Drill Tool(4-3/4(120mm))
Asin: B09WHFD3DJ | Model: A2----KKQ | PartNumber: A2----KKQ | Ean: 0796917904226 | UPC: 796917904226
【Feature 1】 Laiwei Hole Saw Adopts High-Quality M42 Steel And Hss High-Speed Steel, Which Is Sharp And Durable, And The Cutting Is Clean And Smooth. [2] The Hss Center Drill Is Equipped With A Spring That Pushes The Chips Out, Reducing The Time And Effort To Remove Residue, Reducing Shock When Drilling, And Preventing Damage To The Insert And Hole..
【Note】Start Hole Saw Cutting With Low Speed Rotation. Be Sure To Use Perpendicular To The Member. Do Not Tilt The Drill In The Middle. When Cutting Metal, Sprinkle Cutting Oil Or Water On It. Wear Protective Equipment Such As Goggles And Masks When Using..
【Usage】Electric Drill: Used For Drilling Gypsum Board, Plastic, Wood, Plywood, Thin Iron Plate, Thin Stainless Steel Plate, Thin Aluminum Plate, Etc. It Is Used For Plumbing Work, Electrical Work And All Kinds Of Drilling Work, From Professional Workplaces To The Spread Of Do-It-Yourself And Diy. [Compatible Models] Electric Drill, Cordless Electric Drill Driver. If Precision Is Required, Use A Drill Or Drill Stand To Drill Holes..
[Material] The Bimetal Drill Blade Is Made Of High-Quality Hss High-Speed Steel, Which Is Sharp, Corrosion-Resistant, Wear-Resistant And Durable. Center Drills And Tool Holders Are Made Of High Quality M42 Steel For Excellent Machinability And Toughness..
Features
- Use of A2 Hole Saw Mandrel This 120mm hole saw (4.72inch hole saw) adopts A2 heavy duty mandrel, this mandrel is suitable for bi-metal hole saw: 60mm to 360mm. Locking Pin Design: The pin locks the saw in place to prevent over-tightening and thread loss. Safety lock design, easy to disassemble. No tools required, easy to put on and take off. You can set inset screws for quick and easy center bit replacement.
- [Material] The bimetal drill blade is made of high-quality HSS high-speed steel, which is sharp, corrosion-resistant, wear-resistant and durable. Center drills and tool holders are made of high quality M42 steel for excellent machinability and toughness.
- Feature 1 LAIWEI hole saw adopts high-quality M42 steel and HSS high-speed steel, which is sharp and durable, and the cutting is clean and smooth. [2] The HSS center drill is equipped with a spring that pushes the chips out, reducing the time and effort to remove residue, reducing shock when drilling, and preventing damage to the insert and hole.
- Usage Electric drill: used for drilling gypsum board, plastic, wood, plywood, thin iron plate, thin stainless steel plate, thin aluminum plate, etc. It is used for plumbing work, electrical work and all kinds of drilling work, from professional workplaces to the spread of do-it-yourself and DIY. [Compatible models] Electric drill, cordless electric drill driver. If precision is required, use a drill or drill stand to drill holes.
- Note Start hole saw cutting with low speed rotation. Be sure to use perpendicular to the member. Do not tilt the drill in the middle. When cutting metal, sprinkle cutting oil or water on it. Wear protective equipment such as goggles and masks when using.
- See more on Amazon...
Brand: Laiwei | Manufacturer: LAIWEI
See On Amazon #16
95mm Hole Saw,Drill Bit,LAIWEI Hole Saw Heavy Duty Mandrel Hole Cutter for Drilling Wood,Thin Metal Sheet, Aluminum Profile, PVC and Other Materials,Electric Drill Tool(3-3/4(95mm))
Asin: B09WHD74RT | Model: A2----KKQ | PartNumber: A2----KKQ | Ean: 0796917903977 | UPC: 796917903977
【Feature 1】 Laiwei Hole Saw Adopts High-Quality M42 Steel And Hss High-Speed Steel, Which Is Sharp And Durable, And The Cutting Is Clean And Smooth. [2] The Hss Center Drill Is Equipped With A Spring That Pushes The Chips Out, Reducing The Time And Effort To Remove Residue, Reducing Shock When Drilling, And Preventing Damage To The Insert And Hole..
【Note】Start Hole Saw Cutting With Low Speed Rotation. Be Sure To Use Perpendicular To The Member. Do Not Tilt The Drill In The Middle. When Cutting Metal, Sprinkle Cutting Oil Or Water On It. Wear Protective Equipment Such As Goggles And Masks When Using..
【Usage】Electric Drill: Used For Drilling Gypsum Board, Plastic, Wood, Plywood, Thin Iron Plate, Thin Stainless Steel Plate, Thin Aluminum Plate, Etc. It Is Used For Plumbing Work, Electrical Work And All Kinds Of Drilling Work, From Professional Workplaces To The Spread Of Do-It-Yourself And Diy. [Compatible Models] Electric Drill, Cordless Electric Drill Driver. If Precision Is Required, Use A Drill Or Drill Stand To Drill Holes..
[Material] The Bimetal Drill Blade Is Made Of High-Quality Hss High-Speed Steel, Which Is Sharp, Corrosion-Resistant, Wear-Resistant And Durable. Center Drills And Tool Holders Are Made Of High Quality M42 Steel For Excellent Machinability And Toughness..
Features
- Use of A2 Hole Saw Mandrel This 95mm hole saw (3.74inch hole saw) adopts A2 heavy duty mandrel, this mandrel is suitable for bi-metal hole saw: 60mm to 360mm. Locking Pin Design: The pin locks the saw in place to prevent over-tightening and thread loss. Safety lock design, easy to disassemble. No tools required, easy to put on and take off. You can set inset screws for quick and easy center bit replacement.
- [Material] The bimetal drill blade is made of high-quality HSS high-speed steel, which is sharp, corrosion-resistant, wear-resistant and durable. Center drills and tool holders are made of high quality M42 steel for excellent machinability and toughness.
- Feature 1 LAIWEI hole saw adopts high-quality M42 steel and HSS high-speed steel, which is sharp and durable, and the cutting is clean and smooth. [2] The HSS center drill is equipped with a spring that pushes the chips out, reducing the time and effort to remove residue, reducing shock when drilling, and preventing damage to the insert and hole.
- Usage Electric drill: used for drilling gypsum board, plastic, wood, plywood, thin iron plate, thin stainless steel plate, thin aluminum plate, etc. It is used for plumbing work, electrical work and all kinds of drilling work, from professional workplaces to the spread of do-it-yourself and DIY. [Compatible models] Electric drill, cordless electric drill driver. If precision is required, use a drill or drill stand to drill holes.
- Note Start hole saw cutting with low speed rotation. Be sure to use perpendicular to the member. Do not tilt the drill in the middle. When cutting metal, sprinkle cutting oil or water on it. Wear protective equipment such as goggles and masks when using.
- See more on Amazon...
Brand: Laiwei | Manufacturer: LAIWEI
See On Amazon #17
110mm Hole Saw,Drill Bit,LAIWEI Hole Saw Heavy Duty Mandrel Hole Cutter for Drilling Wood, Thin Metal Sheet, Aluminum Profile, PVC and Other Materials, Electric Drill Tool (1, 4-5/16(110mm))
Asin: B09WHCXFQM | Model: A2----KKQ | PartNumber: A2----KKQ | Ean: 0796917904004 | UPC: 796917904004
【Feature 1】 Laiwei Hole Saw Adopts High-Quality M42 Steel And Hss High-Speed Steel, Which Is Sharp And Durable, And The Cutting Is Clean And Smooth. [2] The Hss Center Drill Is Equipped With A Spring That Pushes The Chips Out, Reducing The Time And Effort To Remove Residue, Reducing Shock When Drilling, And Preventing Damage To The Insert And Hole..
【Note】Start Hole Saw Cutting With Low Speed Rotation. Be Sure To Use Perpendicular To The Member. Do Not Tilt The Drill In The Middle. When Cutting Metal, Sprinkle Cutting Oil Or Water On It. Wear Protective Equipment Such As Goggles And Masks When Using..
【Usage】Electric Drill: Used For Drilling Gypsum Board, Plastic, Wood, Plywood, Thin Iron Plate, Thin Stainless Steel Plate, Thin Aluminum Plate, Etc. It Is Used For Plumbing Work, Electrical Work And All Kinds Of Drilling Work, From Professional Workplaces To The Spread Of Do-It-Yourself And Diy. [Compatible Models] Electric Drill, Cordless Electric Drill Driver. If Precision Is Required, Use A Drill Or Drill Stand To Drill Holes..
[Material] The Bimetal Drill Blade Is Made Of High-Quality Hss High-Speed Steel, Which Is Sharp, Corrosion-Resistant, Wear-Resistant And Durable. Center Drills And Tool Holders Are Made Of High Quality M42 Steel For Excellent Machinability And Toughness..
Features
- Use of A2 Hole Saw Mandrel This 110mm hole saw adopts A2 heavy duty mandrel, this mandrel is suitable for bi-metal hole saw: 60mm to 360mm. Locking Pin Design: The pin locks the saw in place to prevent over-tightening and thread loss. Safety lock design, easy to disassemble. No tools required, easy to put on and take off. You can set inset screws for quick and easy center bit replacement.
- [Material] The bimetal drill blade is made of high-quality HSS high-speed steel, which is sharp, corrosion-resistant, wear-resistant and durable. Center drills and tool holders are made of high quality M42 steel for excellent machinability and toughness.
- Feature 1 LAIWEI hole saw adopts high-quality M42 steel and HSS high-speed steel, which is sharp and durable, and the cutting is clean and smooth. [2] The HSS center drill is equipped with a spring that pushes the chips out, reducing the time and effort to remove residue, reducing shock when drilling, and preventing damage to the insert and hole.
- Usage Electric drill: used for drilling gypsum board, plastic, wood, plywood, thin iron plate, thin stainless steel plate, thin aluminum plate, etc. It is used for plumbing work, electrical work and all kinds of drilling work, from professional workplaces to the spread of do-it-yourself and DIY. [Compatible models] Electric drill, cordless electric drill driver. If precision is required, use a drill or drill stand to drill holes.
- Note Start hole saw cutting with low speed rotation. Be sure to use perpendicular to the member. Do not tilt the drill in the middle. When cutting metal, sprinkle cutting oil or water on it. Wear protective equipment such as goggles and masks when using.
- See more on Amazon...
Brand: Laiwei | Manufacturer: LAIWEI
See On Amazon #18
60mm Hole Saw,Bi-Metal Drill Bit,LAIWEI Hole Saw Heavy Duty Mandrel Hole Cutter for Drilling Wood,Thin Metal Sheet,Aluminum Profile,PVC and Other Materials, Electric Drill Tool (2-3/8(60mm))
Asin: B09WHCTXL9 | Model: A2----KKQ | PartNumber: A2----KKQ | Ean: 0796917903922 | UPC: 796917903922
【Feature 1】 Laiwei Hole Saw Adopts High-Quality M42 Steel And Hss High-Speed Steel, Which Is Sharp And Durable, And The Cutting Is Clean And Smooth. [2] The Hss Center Drill Is Equipped With A Spring That Pushes The Chips Out, Reducing The Time And Effort To Remove Residue, Reducing Shock When Drilling, And Preventing Damage To The Insert And Hole..
【Note】Start Hole Saw Cutting With Low Speed Rotation. Be Sure To Use Perpendicular To The Member. Do Not Tilt The Drill In The Middle. When Cutting Metal, Sprinkle Cutting Oil Or Water On It. Wear Protective Equipment Such As Goggles And Masks When Using..
【Usage】Electric Drill: Used For Drilling Gypsum Board, Plastic, Wood, Plywood, Thin Iron Plate, Thin Stainless Steel Plate, Thin Aluminum Plate, Etc. It Is Used For Plumbing Work, Electrical Work And All Kinds Of Drilling Work, From Professional Workplaces To The Spread Of Do-It-Yourself And Diy. [Compatible Models] Electric Drill, Cordless Electric Drill Driver. If Precision Is Required, Use A Drill Or Drill Stand To Drill Holes..
[Material] The Bimetal Drill Blade Is Made Of High-Quality Hss High-Speed Steel, Which Is Sharp, Corrosion-Resistant, Wear-Resistant And Durable. Center Drills And Tool Holders Are Made Of High Quality M42 Steel For Excellent Machinability And Toughness..
Features
- Use of A2 Hole Saw Mandrel This 60mm hole saw (2.36inch hole saw) adopts A2 heavy duty mandrel, this mandrel is suitable for bi-metal hole saw: 60mm to 360mm. Locking Pin Design: The pin locks the saw in place to prevent over-tightening and thread loss. Safety lock design, easy to disassemble. No tools required, easy to put on and take off. You can set inset screws for quick and easy center bit replacement.
- [Material] The bimetal drill blade is made of high-quality HSS high-speed steel, which is sharp, corrosion-resistant, wear-resistant and durable. Center drills and tool holders are made of high quality M42 steel for excellent machinability and toughness.
- Feature 1 LAIWEI hole saw adopts high-quality M42 steel and HSS high-speed steel, which is sharp and durable, and the cutting is clean and smooth. [2] The HSS center drill is equipped with a spring that pushes the chips out, reducing the time and effort to remove residue, reducing shock when drilling, and preventing damage to the insert and hole.
- Usage Electric drill: used for drilling gypsum board, plastic, wood, plywood, thin iron plate, thin stainless steel plate, thin aluminum plate, etc. It is used for plumbing work, electrical work and all kinds of drilling work, from professional workplaces to the spread of do-it-yourself and DIY. [Compatible models] Electric drill, cordless electric drill driver. If precision is required, use a drill or drill stand to drill holes.
- Note Start hole saw cutting with low speed rotation. Be sure to use perpendicular to the member. Do not tilt the drill in the middle. When cutting metal, sprinkle cutting oil or water on it. Wear protective equipment such as goggles and masks when using.
- See more on Amazon...
Brand: Laiwei | Manufacturer: LAIWEI
See On Amazon #19
80mm TCT Hole Saw, 3-1/8 Cutting Diameter Tungsten Carbide Tipped Hole Cutter Opener Drill Bit, for Stainless Steel Metal Plate Aluminum
Asin: B09LMB2ZWL | Model: 409 | PartNumber: 409
Edge Coated With Diamond To Enhance The Drilling Speed And Creates A Sharp, High Precision And Smooth Cut Without Broken..
Fast And Precise Cutting For Stainless Steel, Sheet Metal, Fiberglass And Wood..
Integrated Design Including Drill Bit, Spring, Hex Wrench. Split Point Pilot Drill Bit Prevents The Bit From Walking..
Well Made Of High Speed Steel, With Extremely Sharp Blade, Low Consumption And Durable, Provided Impact Resistance, Wear Resistance..
Features
- Tungsten carbide-tipped cutting edges last longer and can be run at higher rates and speeds, cutting diameter is 80mm(3-1/8"), effective depth is 25mm(0.98 ).
- Well made of high speed steel, with extremely sharp blade, low consumption and durable, provided impact resistance, wear resistance.
- Edge coated with diamond to enhance the drilling speed and creates a sharp, high precision and smooth cut without broken.
- Integrated design including drill bit, spring, hex wrench. Split point pilot drill bit prevents the bit from walking.
- Fast and precise cutting for stainless steel, sheet metal, fiberglass and wood.
- See more on Amazon...
Brand: NACX | Manufacturer: NACX
See On Amazon
Looking For Something Else?
Search