MECCANIXITY 2pcs 12mm Flange Coupling Connector, Shaft Axis Fittings for DIY RC Model Motors, with 4pcs Fastening Screw 1pcs M2 Hex Wrench
Asin: B09WJQ988D | Model: mea220111ee0452 | PartNumber: mea220111ee0452
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Hardened By Heat Treatment And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
All Size Is Measured Manually, Please Allow +/-0.1 Inches Error..
Flange Shaft Coupling Can Fix A Shaft To A Plane, And Can Easily Install Other Accessories On The Shaft. It Is Easy To Install And Replace..
Inner Diameter: 12Mm/0.47 Inch; Total Height: 13Mm/0.51 Inch; Cylinder Outer Diameter: 18Mm/0.7 Inch; Base Plate Diameter: 32Mm/1.25 Inch; Diagonal Screw Hole Distance: 24Mm/0.94 Inch; Base Plate Hole Diameter: 4Mm/0.16 Inch; Material: Iron Plating; Package Content: 2Pcs X Rigid Flange Coupling, 1Pcs X 2Mm Mini Hex Wrench, 4Pcs X M4 Fastening Screw..
Features
- Flange Coupling Connector is widely used in model shaft connection and is a great accessory for RC model motors.
- Inner Diameter: 12mm/0.47 inch; Total Height: 13mm/0.51 inch; Cylinder Outer Diameter: 18mm/0.7 inch; Base Plate Diameter: 32mm/1.25 inch; Diagonal Screw Hole Distance: 24mm/0.94 inch; Base Plate Hole Diameter: 4mm/0.16 inch; Material: Iron Plating; Package Content: 2pcs x Rigid Flange Coupling, 1pcs x 2mm Mini Hex Wrench, 4pcs x M4 Fastening Screw.
- Hardened by heat treatment and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Flange Shaft Coupling can fix a shaft to a plane, and can easily install other accessories on the shaft. It is easy to install and replace.
- All size is measured manually, please allow +/-0.1 inches error.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon Similar To MECCANIXITY 2pcs 12mm Flange Coupling
#1
uxcell 12mm to 12mm Bore Rigid Coupling Set Screw L25XD16 Aluminum Alloy,Shaft Coupler Connector for 3D Printers, Motor Accessories,Black
Asin: B08HCWYW68
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 12mm to 12mm; Total Length: 25mm /0.98 inch, Outside Diameter : 16mm/ 0.63 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
MECCANIXITY 4pcs 6mm Flange Coupling Connector, Shaft Axis Fittings for DIY RC Model Motors, with 8pcs Fastening Screw 2pcs M1.5 Hex Wrench
Asin: B09WJQT3ZC | Model: mea220111ee0457 | PartNumber: mea220111ee0457
Hardened By Heat Treatment And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
All Size Is Measured Manually, Please Allow +/-0.1 Inches Error..
Flange Shaft Coupling Can Fix A Shaft To A Plane, And Can Easily Install Other Accessories On The Shaft. It Is Easy To Install And Replace..
Inner Diameter: 6Mm/0.24 Inch; Total Height: 12Mm/0.47 Inch; Cylinder Outer Diameter: 10Mm/0.39 Inch; Base Plate Diameter: 22Mm/0.86 Inch; Diagonal Screw Hole Distance: 16Mm/0.62 Inch; Base Plate Hole Diameter: 3Mm/0.11 Inch; Material: Iron Plating; Package Content: 4Pcs X Rigid Flange Coupling, 2Pcs X 1.5Mm Mini Hex Wrench, 8Pcs X M3 Fastening Screw..
Features
- Flange Coupling Connector is widely used in model shaft connection and is a great accessory for RC model motors.
- Inner Diameter: 6mm/0.24 inch; Total Height: 12mm/0.47 inch; Cylinder Outer Diameter: 10mm/0.39 inch; Base Plate Diameter: 22mm/0.86 inch; Diagonal Screw Hole Distance: 16mm/0.62 inch; Base Plate Hole Diameter: 3mm/0.11 inch; Material: Iron Plating; Package Content: 4pcs x Rigid Flange Coupling, 2pcs x 1.5mm Mini Hex Wrench, 8pcs x M3 Fastening Screw.
- Hardened by heat treatment and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Flange Shaft Coupling can fix a shaft to a plane, and can easily install other accessories on the shaft. It is easy to install and replace.
- All size is measured manually, please allow +/-0.1 inches error.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #3
2 Pack 12mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver. (2 pcs 12mm)
Asin: B08223Y1FB | Ean: 0717877040144 | UPC: 717877040144
【Wide Range Of Use】Ancirs Flange Coupler Is Produced Based On International Flange Standard, Widely Used In Model Shaft Connection, Perfect Accessories For Rc Model Motor..
【Package Include】Ancirs Flange Coupler Is Packaged With 2 Pack 12Mm Flange Shaft Coupling + 2X M3 Mini Hex Wrench + 4 X M3 Fastening Screw..
【Standard Specification】Inner Diameter: 12Mm. Cylinder Outer Diameter: 10Mm. Cylinder Height: 10Mm. Base Diameter: 22Mm. Base Height: 2Mm..
Features
- Reliable Material Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement.
- Standard Specification Inner Diameter: 12mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 22mm. Base Height: 2mm.
- Wide Range of Use Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor.
- Package Include Ancirs flange coupler is packaged with 2 pack 12mm Flange Shaft Coupling + 2x M3 Mini Hex Wrench + 4 x M3 Fastening Screw.
- See more on Amazon...
Brand: ANCIRS | Manufacturer: ANCIRS
See On Amazon #4
QCQIANG 5PCS 12mm Flange Coupling, Motor Shaft Coupler, Flanged Shaft Mount, for DIY Handmade Model
Asin: B09TQKVZST | Model: LS-242 | PartNumber: LS-242
Package: 5 X 12Mm Flange Shaft Coupling, 10 X M4 Fastening Screw, 20 X M4 Nut, 20 X M4*14 Socket Head Cap Screws, 6 X Hex Wrench.
Use: Suitable For All Kinds Of Diy Handmade Model Accessories.
Features: Easy Installation, Comes With A Wrench For Easy Use.
Size: Inner Diameter: 12Mm.
Features
- Material: Made of high-quality steel with good toughness and corrosion resistance
- Size: Inner Diameter: 12mm
- Package: 5 x 12mm Flange Shaft Coupling, 10 x M4 Fastening Screw, 20 x M4 Nut, 20 x M4*14 Socket head cap screws, 6 x Hex Wrench
- Features: Easy installation, Comes with a wrench for easy use
- Use: Suitable for all kinds of DIY handmade model accessories
- See more on Amazon...
Brand: QCQIANG | Manufacturer: QCQIANG
Dimensions: 0.98 x 4.76 x 3.65 inches
See On Amazon #5
2-Pack 12mm Flange Shaft Coupling High Hardness Metal Axis Bearing Fittings DIY Model Accessory Rigid Flange Guide Shaft Coupler Motor Connector
Asin: B0C9DYKSHL
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily..
Customer Service-Please Feel Free To Tell Us Your Inquires And Issues, We Will Apply Questions For You And Give You The Pleasant Shopping Experience..
Package Include: 2 X 12Mm Flange Shaft Coupling + 1 X M4 Mini Hex Wrench + 4 X M4 Fastening Screw.
Durable Material: Coupling Connector Is Made Of Fine Plating Steel, Heat And Electroplated Process Make It Sturdiness And Insulation, Striking Shaft More Stable And Easy For Installment And Replacement..
Features
- Wide Range of Use: Flange Coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor, etc.
- Durable Material: Coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement.
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily.
- Package Include: 2 x 12mm Flange Shaft Coupling + 1 x M4 Mini Hex Wrench + 4 x M4 Fastening Screw
- Customer Service-Please feel free to tell us your inquires and issues, we will apply questions for you and give you the pleasant shopping experience.
- See more on Amazon...
Brand: LULUQUEEN | Manufacturer: LULUQUEEN
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 0.06 Pounds
See On Amazon #6
4Pcs 12mm Flange Coupling Connector, Rigid Guide Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors
Asin: B0833438LC | Model: H423*4 | PartNumber: H423*4
Size:Inner Diameter: 12Mm,Height:13Mm,Fixed Hole Screw: M4..
Package Included:4Pcs 12Mm Flange Shaft Coupling + 1Pcs M4 Mini Hex Wrench + 8 X M4 Fastening Screw.
Widely Use: Used In Model Shaft Connection, Perfect Accessories For Rc Model Motor..
Features
- Durable Material: The coupling connector is made of 45# steel( it is better than copper and aluminum alloys ), heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement.
- Widely use: used in model shaft connection, perfect accessories for RC Model motor.
- Size:Inner Diameter: 12mm,Height:13mm,Fixed Hole Screw: M4.
- Package included:4Pcs 12mm Flange Shaft Coupling + 1Pcs M4 Mini Hex Wrench + 8 x M4 Fastening Screw
- See more on Amazon...
Brand: daier | Manufacturer: daier
See On Amazon #7
uxcell 12mm to 12mm Bore Rigid Coupling Set Screw L25XD20 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories
Asin: B08HCRWYKG
Top Tight Type Rigid Coupling With 2/4 Screws To Hold The Shaft Tightly; High Torque With Rigidity, Low Inertia And Excellent Sensitivity..
Single Piece Set Screw Clamp Design Makes It Easy To Set Up The Items On The Shaft And Control The Holding Capacity Of The Coupling..
Note: The Rigid Type Basically Does Not Allow Eccentricity, And It Must Be Fully Adjusted During Use..
Widely Used In Blowers,3D Printer,Diy Robots,Cnc Machine,Stepper Motors,Etc. Similar To Rigid Clamp Couplings, Shaft Couplers Are Used To Hold Bearings And Sprockets Tightly On The Shaft, And Are Used In Motor And Gearbox Assemblies..
Features
- Connection Bore Diameter: 12mm to 12mm; Total Length: 25mm /0.98 inch, Outside Diameter : 20mm/ 0.79 inch; with M4 Screws
- Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
- Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
- NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
- Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell 12mm Inner Dia H13*D18 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts
Asin: B07PL9KBFV | Model: a18121800ux0632 | PartNumber: a18121800ux0632
Material: Iron Alloy, Hardened By Heat Treatment, And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
Package: 2 X 12Mm Flange Shaft Coupling, 4 X Fastening Screw( M4 Hex Wrench Not Included Here ).
Function: A Special Coupler, Which Can Fix One Shaft To A Plane And Install Other Parts On The Shaft Easily. Double Connection Points Fasten The Coupler Tightly..
Type: Flange Shaft Coupling, Suitable For Model Shaft Connection, Perfect Accessories For Rc Model Motor, Etc..
Features
- Inner Diameter: 12mm/0.47 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 18mm/0.71 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 26mm/1.02 inch,2 x M4 Fastening Screws
- Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.
- Material: Iron Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.
- Package: 2 x 12mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here )
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.97 x 1.18 inches
See On Amazon #9
MECCANIXITY 2pcs 5mm Flange Coupling Connector, Shaft Axis Fittings for DIY RC Model Motors, with 4pcs Fastening Screw 1pcs M1.5 Hex Wrench
Asin: B09WJSQLB8 | Model: mea220111ee0460 | PartNumber: mea220111ee0460
Hardened By Heat Treatment And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
All Size Is Measured Manually, Please Allow +/-0.1 Inches Error..
Flange Shaft Coupling Can Fix A Shaft To A Plane, And Can Easily Install Other Accessories On The Shaft. It Is Easy To Install And Replace..
Inner Diameter: 5Mm/0.2 Inch; Total Height: 12Mm/0.47 Inch; Cylinder Outer Diameter: 10Mm/0.39 Inch; Base Plate Diameter: 22Mm/0.86 Inch; Diagonal Screw Hole Distance: 16Mm/0.62 Inch; Base Plate Hole Diameter: 3Mm/0.11 Inch; Material: Iron Plating; Package Content: 2Pcs X Rigid Flange Coupling, 1Pcs X 1.5Mm Mini Hex Wrench, 4Pcs X M3 Fastening Screw..
Features
- Flange Coupling Connector is widely used in model shaft connection and is a great accessory for RC model motors.
- Inner Diameter: 5mm/0.2 inch; Total Height: 12mm/0.47 inch; Cylinder Outer Diameter: 10mm/0.39 inch; Base Plate Diameter: 22mm/0.86 inch; Diagonal Screw Hole Distance: 16mm/0.62 inch; Base Plate Hole Diameter: 3mm/0.11 inch; Material: Iron Plating; Package Content: 2pcs x Rigid Flange Coupling, 1pcs x 1.5mm Mini Hex Wrench, 4pcs x M3 Fastening Screw.
- Hardened by heat treatment and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Flange Shaft Coupling can fix a shaft to a plane, and can easily install other accessories on the shaft. It is easy to install and replace.
- All size is measured manually, please allow +/-0.1 inches error.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #10
MECCANIXITY 2pcs 8mm Flange Coupling Connector, Shaft Axis Fittings for DIY RC Model Motors, with 4pcs Fastening Screw 1pcs M4 Hex Wrench
Asin: B09WJQD8LR | Model: mea220111ee0446 | PartNumber: mea220111ee0446
Hardened By Heat Treatment And Then Electroplated. Durable And Insulation, Make Your Shaft More Stable, Easy To Install And Replace..
All Size Is Measured Manually, Please Allow +/-0.1 Inches Error..
Flange Shaft Coupling Can Fix A Shaft To A Plane, And Can Easily Install Other Accessories On The Shaft. It Is Easy To Install And Replace..
Inner Diameter: 8Mm/0.31 Inch; Total Height: 13Mm/0.51 Inch; Cylinder Outer Diameter: 16Mm/0.62 Inch; Base Plate Diameter: 32Mm/1.25 Inch; Diagonal Screw Hole Distance: 24Mm/0.94 Inch; Base Plate Hole Diameter: 4Mm/0.16 Inch..
Features
- Flange Coupling Connector is widely used in model shaft connection and is a great accessory for RC model motors.
- Inner Diameter: 8mm/0.31 inch; Total Height: 13mm/0.51 inch; Cylinder Outer Diameter: 16mm/0.62 inch; Base Plate Diameter: 32mm/1.25 inch; Diagonal Screw Hole Distance: 24mm/0.94 inch; Base Plate Hole Diameter: 4mm/0.16 inch.
- Hardened by heat treatment and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace.
- Flange Shaft Coupling can fix a shaft to a plane, and can easily install other accessories on the shaft. It is easy to install and replace.
- All size is measured manually, please allow +/-0.1 inches error.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon
Looking For Something Else?
Search