MEANLIN MEASURE 1/4 Inch Air Compressor Regulator with Gauge, 0-180 PSI Air Gauge Regulator Inline for Air Compressor and Pneumatic Tools (Four-way valve)
Asin: B09WMVNL7W | Model: XJ-226 | PartNumber: XJ-226
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Adjustment Knob】The Air Pressure Regulator Has A Plastic Adjustment Knob That Allows For Smooth "Light Touch" Flow Settings..
【Package Included】1 X Air Pressure Regulator (Four-Way Valve), 1X Dial Gauge For The 1/8" ,1 X Valve Shut Off Switch, 1 × 1/4" × 1/4" Male Pipe, 1 × Nickel-Plated Iron Air Plug, 1 × Nickel-Plated Iron Air Coupler, 1 ×Thread Pipe Plug, 1 × Hex Wrench, 1 × Teflon Tape..
【Accurate Measurement】The Air Compressor Pressure Regulator Provides Accurate Gas Flow Regulation And Accurately Measures Gases..
【Port Size】The Air Regulator Has 4 Holes,Three Holes Of 1/4" And One Gauge Port 1/8"..
Features
- Easy to Read This regulator comes with a 0~180Psi dial gauge, Makes adjusting your pressure values a piece of cake.
- Port Size The air regulator has 4 holes,Three holes of 1/4 and one Gauge Port 1/8.
- Adjustment Knob The air pressure regulator has a plastic adjustment knob that allows for smooth light touch flow settings.
- Accurate Measurement The air compressor pressure regulator Provides accurate gas flow regulation and Accurately measures gases.
- Package included 1 x Air Pressure Regulator (Four-way valve), 1x Dial gauge for the 1/8 ,1 x Valve Shut Off Switch, 1 1/4 1/4 Male Pipe, 1 Nickel-plated Iron Air Plug, 1 Nickel-plated Iron Air Coupler, 1 Thread Pipe Plug, 1 Hex Wrench, 1 Teflon tape.
- See more on Amazon...
Brand: MEANLIN MEASURE | Manufacturer: MEANLIN MEASURE
See On Amazon Similar To MEANLIN MEASURE 1 4 Inch
#1
MEIGGTOOL 4Pcs Rabbet Router Bit 1/4" Shank with 6 Bearings Set - 1/16", 1/8", 3/16", 1/4", 5/16", 3/8". Interchangeable Bearings with 1/2" to 1/4" Router Collett
Asin: B0BVLYQTYY | Model: MEIGGTOOL | PartNumber: MEIGGTOOL
Durable Steel Body - These Router Bits Made From High-Quality Alloy Blade, Makes Clean And Accurate Cuts On All Types Of Wood With Excellent Resistance To Heat..
Note - Please Check The Shank Size For Your Router Takes To Avoid Ordering In Mistake..
Feeding Speed: 8-12M/Min; [Spindle Speed]:18000-24000Rpm, Please Select The Correct Casing Size And Use Low Speed..
Material - Made Of High-Quality Carbide And Teflon Coating, Not Easy To Break. High Hardness, Wear Resistance, Excellent Thermal Stability, Good Strength And Toughness. Its Advantages Make It Cost-Effective And High Efficiencyc.
Features
- SIZE - Shank Diameter - 1/4",cutting depth (change by replacing bearing): 1/16", 1/8", 3/16", 1/4", 5/16", 3/8", 4 different cutting height: 1/8", 1/4", 3/8", 1/2".
- MATERIAL - Made of high-quality carbide and Teflon coating, not easy to break. high hardness, wear resistance, excellent thermal stability, good strength and toughness. Its advantages make it cost-effective and high efficiencyc
- DURABLE STEEL BODY - These router bits made from high-quality alloy blade, makes clean and accurate cuts on all types of wood with excellent resistance to heat.
- FEEDING SPEED: 8-12M/Min; [Spindle Speed]:18000-24000RPM, please select the correct casing size and use low speed.
- NOTE - Please check the shank size for your router takes to avoid ordering in mistake.
- See more on Amazon...
Brand: MEIGGTOOL | Manufacturer: MEIGGTOOL
Warranty: 1 year warranty
See On Amazon #2
MEIGGTOOL 7Pcs 1/4"Inch Shanks Roundover Edging Router Bit Set,Round Radius: 1/2",3/8",5/16",1/4",7/32",3/16",1/8"
Asin: B091Y3XQYB | Model: MN-103 | PartNumber: MN-103
Widely Applications: The Top Bearing Rounding Edge Forming Router Bit Suitable For Woods, Mdf, Laminate, Particleboard, Plywood Compact Panel, Acrylic, And Etc. Avoid Cutting Metal And Non-Wood Materials..
Router Collett: Contains A 1/2" To 1/4" Router Collett That Easily Fits Into Any Router Tables Or Router Tools For A Secure Fit..
Easy To Use: Use On Cnc And Other Automatic Routers. Such As Woodworking Engraving Machine, Trimming Machine, Cnc Hand-Held, Table-Mounted Router, Etc..
Blade Material：Industrial Grade C3 Micro-Grain Carbide Cutters And Solid Hardened Steel Bodies With High Quality Guide Bearings Provide Superior Wear Resistance..
Features
- Size: 1/4"Inch Shanks Roundover Edging Router Bit Set,Round Radius: 1/2",3/8",5/16",1/4",7/32",3/16",1/8"
- Blade Material Industrial grade C3 micro-grain carbide cutters and solid hardened steel bodies with high quality guide bearings provide superior wear resistance.
- Widely Applications: The Top Bearing Rounding Edge Forming Router Bit Suitable for Woods, MDF, Laminate, Particleboard, Plywood compact panel, Acrylic, and etc. Avoid cutting metal and non-wood materials.
- Easy To Use: Use on CNC and other automatic routers. Such as woodworking engraving machine, trimming machine, CNC hand-held, table-mounted router, etc.
- Router Collett: Contains a 1/2 to 1/4 Router Collett that easily fits into any router tables or router tools for a secure fit.
- See more on Amazon...
Brand: MEIGGTOOL | Manufacturer: MEIGGTOOL
Warranty: 1 year warranty
See On Amazon #3
MEANLIN MEASURE 0-100psi Water Pressure Gauge,3/4" Female 2.5" FACE DIAL Water Pressure Test Gauge with Sealing Ring, Water Pressure Gauge for Home
Asin: B08YNNPJ4N | Model: XJ-017-1 | PartNumber: XJ-017-1
【Installation Method】Lower Mount.
【Applicable】Water, Oil, Air And More.
【Temperature Range】0-55℃/32-131℉【Pressure Range】0-100Psi.
【Size】3/4" Female ；2.5" Face Dial.
Features
- Product name Iron Shell Water pressure test pressure gauge
- Size 3/4 Female 2.5 FACE DIAL
- Installation method Lower Mount
- Temperature Range 0-55 /32-131 Pressure Range 0-100Psi
- Applicable Water, Oil, Air and more
- See more on Amazon...
Brand: MEANLIN MEASURE | Manufacturer: MEANLIN MEASURE
Warranty: 1 year warranty
See On Amazon #4
MEIGGTOOL 1/4 Inch Shank Router Bit Extension Collets ER20M Extender Chuck Converter Adapter, Convert 1/2-Inch & 1/4-Inch Shank Bits for Milling Lathe Tool Workholding and CNC Engraving Machine
Asin: B0B6H3G32P | Model: MN-159-1 | PartNumber: MN-159-1
🔨Widely Use:Suitable For Woods, Mdf, Laminate, Particleboard, Plywood Compact Panel, Acrylic, And Other Processing, High Precision, Stable Performance. Extend The Router Bit To Provide The Full Depth Of Cut..
🔨Package Including:1*1/4 Inch Shank Collet Extension, 1*1/2 Inch Er20m Collet, 1*1/4 Inch Er20m Collet,2* Er20m Screw Cap,1* Er20m Wrench..
🔨Easy To Use: First,Place The Er Router Collet In The Extension Shank. Then Put A Router Bit In The Er Collet.Finally, Cover The Nut And Tighten It With A Wrench.Tips: When Installing The Extender, It Needs To Be Inserted Into The Bottom As Far As Possible..
🔨Material:Router Collet Extension And Er20m Spring Collet Made Of Carbide, With High Strength, Good Toughness, Strong Shock Resistance..
Features
- Size: shank diameter:1/4", Accept shank size: 1/2" and 1/4" shank router bits.
- Material:Router collet extension and ER20M spring collet made of Carbide, With High strength, good toughness, strong shock resistance.
- Widely Use:Suitable for Woods, MDF, Laminate, Particleboard, Plywood compact panel, Acrylic, and other processing, High precision, stable performance. Extend the router bit to provide the full depth of cut.
- Easy to Use: First,place the ER router collet in the extension shank. Then put a router bit in the ER collet.Finally, cover the nut and tighten it with a wrench.Tips: When installing the extender, it needs to be inserted into the bottom as far as possible.
- Package Including:1*1/4 inch shank collet extension, 1*1/2 inch ER20M collet, 1*1/4 inch ER20M collet,2* ER20M Screw cap,1* ER20M wrench.
- See more on Amazon...
Brand: MEIGGTOOL | Manufacturer: MEIGGTOOL
Warranty: 1 year warranty
See On Amazon #5
MEANLIN MEASURE 1/2" NPT Bimetal Thermometer for hot Water, boilers, and Pipes 2-1/2" Dial, 2-1/4" Lead-Free Brass Stem Temperature Range 0-250 F/-20-120 C, Accuracy 2%,Center Back Mount
Asin: B08PQLZYST | Model: XJ-057 | PartNumber: XJ-057
【Installation Method】Center Back Mount.
【Applicable】Measure Water Or Other Media (Avoid Measuring Media That Is Corrosive To Brass).
【Temperature Range】0-250°F/-20-120 ° C.
【Size】1/2''Npt；2-1/2" Dial Face.
Features
- Product name Bimetallic thermometer
- Size 1/2''NPT 2-1/2 DIAL FACE
- Installation method Center Back Mount
- Temperature Range 0-250 F/-20-120 C
- Applicable Measure water or other media (avoid measuring media that is corrosive to brass)
- See more on Amazon...
Brand: MEANLIN MEASURE | Manufacturer: MEANLIN MEASURE
Dimensions: 0.01 x 2.30 x 0.01 inches
Warranty: 1 year warranty
See On Amazon #6
MEANLIN MEASURE 0~100Psi Stainless Steel 1/4" NPT 4" FACE DIAL Liquid Filled Pressure Gauge WOG Water Oil Air Lower Mount, with 1/4" x 1/2" NPT and 1/4" x 3/8" NPT Hex Bushing
Asin: B09VDJQTDC | Model: XJ-204 | PartNumber: XJ-204
【Installation Method】Lower Mount.
【Notice】Npt Thread Size Is A Nominal Pipe Size, And It Does Not Represent The Actual Diameter.
【Temperature Range】32-131℉/0-55℃【Maximum Range】0-0.7Mpa Or 0-100 Psi.
【Size】1/4''Npt；4" Dial Face.
Features
- Product Name Stainless steel Liquid Filled Pressure Gauge
- Size 1/4''NPT 4 DIAL FACE
- Installation method Lower Mount
- Temperature Range 32-131 /0-55 Maximum Range 0-0.7MPa or 0-100 Psi
- Notice NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter
- See more on Amazon...
Brand: MEANLIN MEASURE | Manufacturer: MEANLIN MEASURE
Warranty: 1 year warranty
See On Amazon #7
MEANLIN MEASURE 0-160Psi Stainless Steel Thermal Pressure Gauge 30-250 1/4" NPT 2.5" FACE DIAL Liquid Filled Pressure Gauge, with 1/4" x 1/2" NPT and 1/4" x 3/8" NPT Hex Bushing,Back Mount
Asin: B09Q875YQ2 | Model: XJ-192 | PartNumber: XJ-192
【Installation Method】Back Mount.
【Applicable】Pressure,Temperature Measurement Of Air And Liquid（Since The Connection Part Is Brass, Please Do Not Measure Corrosive Substances）【Notice】Npt Thread Size Is A Nominal Pipe Size, And It Does Not Represent The Actual Diameter.
【Temperature Range】30~250℉【Pressure Range】0-160Psi.
【Size】1/4" Npt；2-1/2" Dial Face.
Features
- Product Name Thermal Pressure Gauge
- Size 1/4 NPT 2-1/2 DIAL FACE
- Installation method Back Mount
- Temperature Range 30~250 Pressure Range 0-160Psi
- Applicable Pressure,temperature measurement of air and liquid Since the connection part is brass, please do not measure corrosive substances Notice NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter
- See more on Amazon...
Brand: MEANLIN MEASURE | Manufacturer: MEANLIN MEASURE
Warranty: 1 year warranty
See On Amazon #8
MEANLIN MEASURE Argon Regulator Flow Meter with 9.8 Feet Hose,CGA580 Inlet Connection,5/8" x 18RH Outlet Fitting,Dual Output Argon Welding Flowmeter for TIG MIG Welder
Asin: B0BYHSNCFR | Model: XJ-374 | PartNumber: XJ-374
【Accurate Measurement】This Gauge Measuring Range 0-4500Psi,It Has A Highly Sensitive Pointer To Sense The Pressure In The Pressure Tank,So It Is More Reliable Than The Flow-Gauge Style..
【Package Include】1*Argon Regulator Flow Meter, 1* 9.8 Feet Hose, 2*Male 5/"8 Unf-18Rh Fitting, 2*1/4" Hose Barb Adapter, 2*Female 9/16"X18 Nut.
【Excellent Quality】Our Double Dutput Argon Regulator Is Made Of Brass For High Strength, Toughness And Corrosion Resistance For Long Term Use..
【Cga-580 Inlet】This Gas Pressure Regulator Can Be Used With Argon, Helium And Co2 Gas Tanks,Ideal For Mig And Tig Welding Applications..
Features
- Easy to Read 2" gauges for easy reading. Makes adjusting your pressure values a piece of cake.
- CGA-580 Inlet This Gas Pressure Regulator Can Be Used with Argon, Helium and CO2 Gas Tanks,Ideal for MIG and TIG welding applications.
- Accurate Measurement This Gauge measuring range 0-4500PSI,It has a highly sensitive pointer to sense the pressure in the pressure tank,so it is more reliable than the flow-gauge style.
- Excellent Quality Our Double Dutput Argon Regulator Is Made Of Brass For High Strength, Toughness And Corrosion Resistance For Long Term Use.
- Package Include 1*Argon Regulator Flow Meter, 1* 9.8 Feet Hose, 2*Male 5/8 UNF-18RH Fitting, 2*1/4 Hose Barb Adapter, 2*Female 9/16x18 Nut
- See more on Amazon...
Brand: MEANLIN MEASURE | Manufacturer: MEANLIN MEASURE
Warranty: 1 year warranty
See On Amazon #9
MEANLIN MEASURE MPS2040 Water Well Pressure Control and Port Air Compressor Pressure Switch,20-40 PSI Pressure Setting,1/4'' Female NPT,Adjustable Differential,Tank Water Pump Control Valve Black
Asin: B099PRQMKT | Model: XJ-126 | PartNumber: XJ-126
-Heavy Fiberboard Bracket For Movement Of Contacts Much Stronger And Heat Resistant..
-Extra-Large Silver Contact For Longer Service Life..
-1/4" Female Npt Thread, Standard Size, Fits All 1/4'' Npt For All Types Of Electric Water Well Pumps..
-Cut-On Pressure 20 Psi & Cut-Off Pressure 40 Psi - Each Turn Of The Adjustment Screw = 2 Psi..
Features
- -This Product Water Well Pump Replacement Switch Is Designed To Fit All Types OF Electric Water Well Pumps (Submersible,Jet,Reciprocating, Etc.).
- -CUT-ON Pressure 20 Psi & CUT-OFF Pressure 40 Psi - Each Turn Of The Adjustment Screw = 2 Psi.
- -Heavy Fiberboard Bracket For Movement OF Contacts Much Stronger And Heat Resistant.
- -1/4 Female NPT Thread, Standard Size, Fits All 1/4'' NPT For All Types Of Electric Water Well Pumps.
- -Extra-Large Silver Contact For Longer Service Life.
- See more on Amazon...
Brand: MEANLIN MEASURE | Manufacturer: MEANLIN MEASURE
Warranty: 1 year warranty
See On Amazon #10
MEIGGTOOL 1/4-Inch Diameter Spiral Flush Trim Router Bits, Down-Cut Flush Trim Solid Carbide Spiral Router Bit 1/4-Inch Shank.
Asin: B0BFDSS6DY | Model: YH-162 | PartNumber: YH-162
Material: Made Of Solid Carbide, With C3 Micro-Grain Tungsten Carbide Cutter, Industrial Quality Router Bits Provide Precise, Efficient Cuts And Offers Extreme Durability..
Use: For Use With Soft & Hard Woods, Ply-Woods, Composites, Laminates, Plastics And Some Non-Ferrous Metals..
Features: Flush Trim All Types Of Material For A Perfect Finish.The Maximum Speed Of This Router Bit Is 12K..
Size: Cutting Diameter: 1/4",Cutting Length: 1-1/8",Shank 1/4",Overall Length: 3"..
Features
- Name: 1/4-Inch Diameter Spiral Flush Trim Router Bits.
- Size: Cutting Diameter: 1/4,Cutting Length: 1-1/8,Shank 1/4,Overall Length: 3.
- Material: Made of Solid Carbide, with C3 Micro-grain Tungsten Carbide Cutter, Industrial quality router bits provide precise, efficient cuts and offers extreme durability.
- Features: Flush trim all types of material for a perfect finish.The maximum speed of this router bit is 12k.
- Use: For use with soft & hard woods, ply-woods, composites, laminates, plastics and some non-ferrous metals.
- See more on Amazon...
Brand: MEIGGTOOL | Manufacturer: MEIGGTOOL
Warranty: 1 year warranty
See On Amazon #11
MEIGGTOOL 5PCS 1/2" to 1/4" Router Collett Adapter Bit Shank Reduction Sleeve Tools for Woodworking Engaving Machine
Asin: B099PRFQRM | Model: YH-157S | PartNumber: YH-157S
High Precision: Metal Die Was Made With A Precision Machine Tool To Control Thickness And Stable Clamping, Good To Operate And Improve Work Efficiency..
Scope Of Application: Ideal Collet Or Chuck Conversion, Fits For Woodworking Engraving Machine,Cnc..
Easy To Apply: Just Insert It Into The Clamp Head And Tighten It As Usual..
Material: Adopt High Quality Carbide Material, Suitable For Long-Term Use, With High Strength, Good Toughness, Strong Shock Resistance..
Features
- Size: For turning mechanica wood carving milling chuck connector form1/2" to 1 /4", Lnner Diameter is 6.35mm/0.25", Outer Diameter is 12.7mm/0.5"
- Material: Adopt high quality carbide material, suitable for long-term use, With High strength, good toughness, strong shock resistance.
- High precision: Metal die was made with a precision machine tool to control thickness and stable clamping, good to operate and improve work efficiency.
- Easy to apply: just insert it into the clamp head and tighten it as usual.
- Scope of application: Ideal collet or chuck conversion, Fits for woodworking engraving machine,CNC.
- See more on Amazon...
Brand: MEIGGTOOL | Manufacturer: MEIGGTOOL
See On Amazon #12
4" Oil Filled Pressure Gauge - Stainless Steel Case, Brass, 3/8" NPT, Lower Mount Connection, 0-160PSI
Asin: B006VE30SI | Model: PB403L-160 | PartNumber: PB403L-160 | Ean: 0783583825252 | UPC: 783583825252
Brand: DuraChoice | Manufacturer: DuraChoice
Weight: 1.25 pounds
See On Amazon #13
MEANLIN MEASURE Nitrogen Regulator 0-800PSI CGA580 Inlet, 1/4" Male Connector Heavy-Duty Handle Helium Regulator with 60 Inch Hose
Asin: B09MKG9YH3 | Model: XJ-103-1 | PartNumber: XJ-103-1
【Size】Connector Cga580，1/4" Male Bottom Connection，2 Inch Meter, With 60 Inch Hose..
【Application】Refrigeration System, Inert Gas, Pressure Test, Etc..
【Features】Brass Valve Body, Sturdy And Durable, Corrosion-Resistant, And Good Overall Sealing..
【Inlet Pressure Range】0-4000Psi【Delivery Pressure Range】0-800Psi.
Features
- Easy to Read 2.5" dual gauges for easy reading. Makes adjusting your pressure values a piece of cake.
- Inlet pressure range 0-4000PSI Delivery pressure range 0-800PSI
- Size Connector CGA580 1/4 Male Bottom connection 2 inch Meter, with 60 inch hose.
- Features Brass valve body, sturdy and durable, corrosion-resistant, and good overall sealing.
- Application Refrigeration system, inert gas, pressure test, etc.
- See more on Amazon...
Brand: MEANLIN MEASURE | Manufacturer: MEANLIN MEASURE
Warranty: 1 year warranty
See On Amazon #14
MEIGGTOOL 15PCS Router Bit 1/4" Shank, Beginner Router Bit Kit for DIY, Woodworking Project, High Grade Yellow.
Asin: B08F271758 | Model: MN-011 | PartNumber: MN-011 | Ean: 4874422235557
Easy To Store - The Included Wood Case Is Sturdy And Makes Storing The High-Quality Router Bits Convenient While In-Between Jobs Or Diy Home Improvement Projects..
Including: Include Cove Box Bit 1/8", Bearing 45° Chamfer Bit, Straight Bit 15/64", Rounding Over Bit 3/8", 90° "V" Grooving Bit 1/2", Roman Ogee Bit 5/32", Straight Bit 1/2", Straight Bit 7/64", Cove Box Bit 1/4", Bearing Cove Box Bit 1/4", Covetail Bit 1/2", Rounding Over Bit 1/4", Straight Bit 1/4", Bearing Flute Trim Bit 1/2", Straight Bit 5/8". Different Cutter Types, Work Out A Different Effect..
Durable - Made Of Solid Carbide, Long Service Life And Strong Wear Resistance.
Durable Steel Body - These Router Bits Made From High-Quality Alloy Blade, Makes Clean And Accurate Cuts On All Types Of Wood With Excellent Resistance To Heat..
Features
- SPECIAL: This MEIGGTOOL Tungsten Carbide Router Bit Set - 15 Piece comes with all 1/4-inch round shank bits that will fit any 1/4-inch router shank
- DURABLE STEEL BODY - These router bits made from high-quality alloy blade, makes clean and accurate cuts on all types of wood with excellent resistance to heat.
- EASY TO STORE - The included wood case is sturdy and makes storing the high-quality router bits convenient while in-between jobs or DIY home improvement projects.
- Durable - Made of solid carbide, long service life and strong wear resistance
- INCLUDING: Include Cove box bit 1/8, Bearing 45 Chamfer bit, Straight bit 15/64, Rounding over bit 3/8, 90 V Grooving bit 1/2, Roman ogee bit 5/32, Straight bit 1/2, Straight bit 7/64, Cove box bit 1/4, Bearing cove box bit 1/4, Covetail bit 1/2, Rounding over bit 1/4, Straight bit 1/4, Bearing flute trim bit 1/2, Straight bit 5/8. different cutter types, work out a different effect.
- See more on Amazon...
Brand: MEIGGTOOL | Manufacturer: MEIGG
Warranty: 1 year warranty
See On Amazon #15
MEIGGTOOL 23pcs Woodworking Chamfer Drilling Tool, 8pcs Wood Plug Cutter Drill, 7pcs Three Pointed Countersink Drill Bit with L-Wrench, 6pcs 1/4" Hex 5 Flute 90 Degree Countersink Drill Bits
Asin: B091Y4SVLM | Model: YH-106 | PartNumber: YH-106
1/4" Hex Shank 5 Flute Countersink Drill Bit Made Of High Speed Steels And With 6 Different Diameter Sizes 6Mm(1/4"), 8Mm(5/16"), 9Mm(3/8"), 12Mm(1/2"), 16Mm(5/8"), 19Mm(3/4"),Used For Sinking 90 Degree 6 Different Sizes Holes Into Wood And Pvc Boards Countersunk Screws And Fixings..
A Set Of Fully Equipped Woodworking Tools Are Perfect For Professional Or Beginners. It Will Be Great Gift To Your Father, Woodworking Enthusiast, Diy Lovers..
7Pcs Three Pointed Countersink Drill Bits Made Of High Speed Steel With Good Abrasion Resistance And Durable,Includes 3Mm, 4Mm, 5Mm, 6Mm, 7Mm, 8Mm, 10Mm For Drilling Pilot Holes,The Drill Bit Large Chip Flute And Five Edge Chamfers Allows Faster And Easier Discharge Of Sawdust..
3/8" Shank 8Pcs Wood Plug Cutter Drill Bit Set Made Of Durable Carbon Steel Material,Used For Tapered 1/4", 3/8", 1/2" ,5/8" Wood Plugs To Cover Recessed Screw Holes Or Hide Blemishes,Able To Cut Plugs To 22Mm/23Mm/25Mm/26Mm In Length..
Features
- Package included 23pcs woodworking drilling or chamfer too,6pcs 1/4" Hex Shank HSS 5 Flute 90 Degree Countersink Drill Bits,7pcs Three Pointed High Speed Steel Countersink Drill Bit with One L-wrench for Wood Drilling or Woodworking Chamfer,8pcs wood plug cutters drill bit set and 1pcs Automatic center punch for marks workpiece with a dimple, creating a starting point that prevents screws and drills from wandering
- 3/8 shank 8pcs wood plug cutter drill bit set made of durable carbon steel material,used for tapered 1/4, 3/8, 1/2 ,5/8 wood plugs to cover recessed screw holes or hide blemishes,able to cut plugs to 22mm/23mm/25mm/26mm in length.
- 1/4 hex shank 5 flute countersink drill bit made of high speed steels and with 6 different diameter sizes 6mm(1/4), 8mm(5/16), 9mm(3/8), 12mm(1/2), 16mm(5/8), 19mm(3/4),used for sinking 90 Degree 6 different sizes Holes into Wood and PVC boards Countersunk Screws and Fixings.
- 7pcs three pointed countersink drill bits made of high speed steel with good abrasion resistance and durable,includes 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm for drilling pilot holes,the drill bit large chip flute and five edge chamfers allows faster and easier discharge of sawdust.
- A set of fully equipped woodworking tools are perfect for professional or beginners. It will be great gift to your father, Woodworking enthusiast, DIY lovers.
- See more on Amazon...
Brand: MEIGGTOOL | Manufacturer: MEIGGTOOL
Weight: 1.00 Pounds
Warranty: 1 year warranty
See On Amazon #16
MEANLIN MEASURE Tire Air Chuck,1/4" FNPT Heavy Duty Screw on Brass Tire Air Chuck for Tire Inflator Gauge Compressor Accessories Twist-on Chucks(Pack 2 pcs)
Asin: B0B76HSGN4 | Model: XJ-294 | PartNumber: XJ-294
【Universal Connectors】 1/4''Female Npt, 3/4'' Hex, Open Flow,Fits Standard 1/4" Npt Fittings And Is Very Easy To Install..
【Item Type】 Tire Air Chuck For Bicycles,Motorcycles,Cars,Buses, Trucks And So On..
【Application】 Ideal For Use With Inflator And Pressure Gauges..
【External Structure】 360°Roller Design.High Quality Brass,High Hardness And Corrosion Resistance For Long-Term Use..
Features
- OUTSTANDING DESIGN Attaches Quickly To The Tire Inflator Chuck,Tire Inflator Chucks With Thread Can Make It Bite On The Tire Valve Stem Tightly When Inflating.
- EXTERNAL STRUCTURE 360 Roller Design.High Quality Brass,High Hardness And Corrosion Resistance For Long-Term Use.
- UNIVERSAL CONNECTORS 1/4''Female NPT, 3/4'' Hex, OPEN Flow,Fits Standard 1/4 NPT Fittings And Is Very Easy To Install.
- APPLICATION Ideal For Use With Inflator And Pressure Gauges.
- ITEM TYPE Tire Air Chuck For Bicycles,Motorcycles,Cars,Buses, Trucks And So On.
- See more on Amazon...
Brand: MEANLIN MEASURE | Manufacturer: MEANLIN MEASURE
Warranty: 1 year warranty
See On Amazon #17
Winters TAS Series Brass Dual Scale Industrial 5AS Straight Thermometer with Thermowell, 20-180 F/C Range, +/-2 Percent Accuracy, 1/2'' NPT Bottom Mount
Asin: B0087VU1GC | Model: TAS131 | PartNumber: TAS131 | Ean: 0628311003062 | UPC: 628311003062
Impact Resistant Polypropylene Case.
5 Year Warranty.
Red Liquid-In Glass.
Separable Thermowell.
Features
- An all-purpose, economical thermometer with a vertical sensing tube and case
- Separable thermowell
- Impact resistant polypropylene case
- Red liquid-in glass
- 5 Year warranty
- See more on Amazon...
Brand: Winters Instruments | Manufacturer: Winters
See On Amazon #18
MEANLIN MEASURE 0-100Psi 4" DIAL FACE 1/4" NPT Well Pump Pressure Gauge with 1/2" NPT and 3/8" NPT Adaptor, 3-2-3% Accuracy Lower Mount
Asin: B09VDKGP6K | Model: XJ-207 | PartNumber: XJ-207
【Installation Method】Lower Mount.
【Features】Suitable For Pressure Testing Of Well Pumps【Notice】Npt Thread Size Is A Nominal Pipe Size, And It Does Not Represent The Actual Diameter.
【Temperature Range】0-55℃/32-131℉【Pressure Range】0-100Psi.
【Size】1/4''Npt；4" Dial Face.
Features
- Product Name Well Pump Pressure Gauge
- Size 1/4''NPT 4 DIAL FACE
- Installation method Lower Mount
- Temperature Range 0-55 /32-131 Pressure Range 0-100Psi
- Features Suitable for pressure testing of well pumps Notice NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter
- See more on Amazon...
Brand: MEANLIN MEASURE | Manufacturer: MEANLIN MEASURE
Warranty: 1 year warranty
See On Amazon #19
Pro Series by HHIP 4901-0202 4R Rigid Rule, 12" x 1"
Asin: B01BHHZ428 | Model: 4901-0202 | PartNumber: 4901-0202 | Ean: 0769053051079 | UPC: 769053051079
Made From The Finest Steel Available.
Precisely Etched For Accuracy And Readability.
Fully Hardened, Tempered And Chrome Finished.
8Ths & 16Ths, 32Nds & 64Ths.
Features
- 12 X 1" 4R Rigid Rule
- 8ths & 16ths, 32nds & 64ths
- Made from the finest steel available
- Fully hardened, tempered and chrome finished
- Precisely etched for accuracy and readability
- See more on Amazon...
Brand: HHIP | Manufacturer: HHIP
Dimensions: 2.00 x 1.00 x 12.00 inches | Weight: 2.20 pounds
See On Amazon
Looking For Something Else?
Search