uxcell #40 Chain Idler Sprocket, 12mm Bore 1/2" Pitch 13 Tooth Tensioner, Black Oxide Finished C45 Carbon Steel with Insert Single Bearing for ISO 08A Chains
Asin: B09WYJ1YB6 | Model: a22011900ux0712 | PartNumber: a22011900ux0712
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Chain Sprocket, With A Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 13; Bearing Model: 6001Z; Outside Diameter: 58mm / 2.28-inch; Bump Width: 3.5mm / 0.14-inch; Total Width: 14mm / 0.55-inch; Bore Diameter: 12mm / 0.47-inch; Pitch: 1/2-inch / 12.7mm; Tooth Width: 7mm / 0.28-inch; 1 x Idler Sprocket
- Idler sprocket is a chain sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 40 Chain Idler Sprocket
#1
uxcell #35 Chain Idler Sprocket, 10mm Bore 3/8" Pitch 15 Tooth Sprocket Tensioner, C45 Carbon Steel 35 Roller Chain Sprocket with Bearing for ISO 06C Chain, 2Pcs
Asin: B0CCW63929
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With A Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 15; Outside Diameter: 49mm / 1.93-inch; Bump Width: 5mm / 0.2-inch; Total Width: 14mm / 0.55-inch; Bore Diameter: 10mm / 0.39-inch; Pitch: 3/8-inch / 9.525mm; Tooth Width: 4mm / 0.16-inch; 2 x Idler Sprocket
- Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell #25 Chain Idler Sprocket, 12mm Bore 1/4" Pitch 20 Tooth Tensioner, Black Oxide Finish C45 Carbon Steel with Insert Double Bearing for ISO 04C Chains
Asin: B09PDT5NSV | Model: a21120100ux0222 | PartNumber: a21120100ux0222
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With Double Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 20; Bearing Model: 6901Z; Outside Diameter: 43mm / 1.69-inch; Bump Width: 6mm / 0.24-inch; Total Width: 15mm / 0.59-inch; Bore Diameter: 12mm / 0.47-inch; Pitch: 1/4-inch / 6.35mm; Tooth Width: 3mm / 0.12-inch; 1 x Idler Sprocket
- Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell Chain Idler Sprocket, 8mm Bore 1/2" Pitch 12 Tooth Tensioner, Black Oxide Finish C45 Carbon Steel with Insert Single Bearing for ISO 08B Chains
Asin: B09SD6JVWD | Model: a21121800ux0483 | PartNumber: a21121800ux0483
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With A Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 12; Bearing Model: 608ZZ; Outside Diameter: 54mm / 2.13-inch; Bump Width: 3.5mm / 0.14-inch; Total Width: 14mm / 0.55-inch; Bore Diameter: 8mm / 0.31-inch; Pitch: 1/2-inch / 12.7mm; Tooth Width: 7.3mm / 0.29-inch; 1 x Idler Sprocket
- Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell #25 Roller Chain Idler Sprocket, 12mm Bore 1/4" Pitch 20 Tooth Sprocket Tensioner, C45 Carbon Steel 25 Roller Chain Sprocket with Bearing for ISO 04C Chain, 2Pcs
Asin: B0CCW4KY1B
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With A Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 20; Outside Diameter: 44mm / 1.73-inch; Bump Width: 6mm / 0.24-inch; Total Width: 15mm / 0.59-inch; Bore Diameter: 12mm / 0.47-inch; Pitch: 1/4-inch / 6.35mm; Tooth Width: 3mm / 0.12-inch; 2 x Idler Sprocket
- Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell #25 Chain Idler Sprocket, 7mm Bore 1/4" Pitch 20 Tooth Tensioner, Black Oxide Finish C45 Carbon Steel with Insert Single Bearing for ISO 04C Chains
Asin: B09PDV6BCH | Model: a21120100ux0211 | PartNumber: a21120100ux0211
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With A Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 20; Bearing Model: 627ZZ; Outside Diameter: 43mm / 1.69-inch; Bump Width: 5mm / 0.2-inch; Total Width: 13mm / 0.51-inch; Bore Diameter: 7mm / 0.28-inch; Pitch: 1/4-inch / 6.35mm; Tooth Width: 2.8mm / 0.11-inch; 1 x Idler Sprocket
- Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell Chain Idler Sprocket, 5mm Bore 3/8" Pitch 12 Tooth Tensioner, Black Oxide Finish C45 Carbon Steel with Insert Double Bearing for ISO 06B Chains
Asin: B09PDW5KCF | Model: a21120100ux0244 | PartNumber: a21120100ux0244
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With Double Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 12; Bearing Model: 635Z; Outside Diameter: 40mm / 1.57-inch; Bump Width: 7.3mm / 0.29-inch; Total Width: 20mm / 0.79-inch; Bore Diameter: 5mm / 0.2-inch; Pitch: 3/8-inch / 9.525mm; Tooth Width: 5mm / 0.2-inch; 1 x Idler Sprocket
- Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell #35 Chain Idler Sprocket, 10mm Bore 3/8" Pitch 15 Tooth Tensioner, Black Oxide Finished C45 Carbon Steel with Insert Single Bearing for ISO 06C Chains
Asin: B09WYKWM9B | Model: a22011900ux0694 | PartNumber: a22011900ux0694
The Product Is Made Of C45 Carbon Steel, The Tooth Part High Temperature Quenching Heat Treatment, High Hardness, Wear Resistance, Long Service Life, Easy To Use..
Widely Used In Milling Machine, Drilling Machine Or Other Machinery Transmission Occasions..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Chain Sprocket, With A Sealed Bearing That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Specifications: Number of Teeth: 15; Bearing Model: 6000ZZ; Outside Diameter: 50mm / 1.97-inch; Bump Width: 5mm / 0.2-inch; Total Width: 14mm / 0.55-inch; Bore Diameter: 10mm / 0.39-inch; Pitch: 3/8-inch / 9.525mm; Tooth Width: 4mm / 0.16-inch; 1 x Idler Sprocket
- Idler sprocket is a chain sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
- The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Widely used in milling machine, drilling machine or other machinery transmission occasions.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell 2pcs ANSI #25 / DIN(ISO)04C Roller Chain Idler Sprocket 9mm Bore, 1/4" Pitch, Hardened 17 Tooth Tensioner Sprocket, Insert 2 Bearings (B Type)
Asin: B0CNPWZ4GS
Made Of Quality #45 Steel, Which Goes Through A Quenching Process To Harden The Teeth. This Enhances Durability And Reduces Friction, Resulting In A Sprocket With High Hardness, Excellent Wear Resistance, And A Long Service Life..
Suitable For A Wide Range Of Applications, Including Conveyor Systems, Agricultural Machinery, Industrial Equipment, And More..
The Idler Sprocket Should Not Rotate At A Greater Speed Than Is Allowable For Drive Sprockets Of The Same Size. Every Roller Chain Idler Sprocket Comes With Strong Teeth That Can Latch Onto The Chain. It Is Suggested That Idler Sprockets Have At Least Three Teeth In Mesh With The Chain..
Idler Sprocket Is A Flat Sprocket, With 2 Precision Bearings (689Z) That Allows The Sprocket To Rotate Freely. Idler Sprockets Are Normally Mounted In A Fixed Position On A Fixed Shaft..
Features
- Model: For ANSI #25 / DIN(ISO)04C Chain. Size: 9mm Bore Idler Tensioner Sprocket 17 Tooth, 6.35mm (1/4") Pitch, 38mm Outside Diameter.
- Idler sprocket is a flat sprocket, with 2 precision bearings (689Z) that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
- Made of quality #45 steel, which goes through a quenching process to harden the teeth. This enhances durability and reduces friction, resulting in a sprocket with high hardness, excellent wear resistance, and a long service life.
- The idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
- Suitable for a wide range of applications, including conveyor systems, agricultural machinery, industrial equipment, and more.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell Aluminum XL 40 Teeth 6.35mm Bore Timing Belt Idler Pulley Flange Synchronous Wheel for 10mm Belt CNC
Asin: B0747KRZPV | Model: a17042100ux1295 | PartNumber: a17042100ux1295
40 Contact With The Tooth Side Which Minimizes The Risk Of The Belt Slipping..
Package Content: 1 X Xl 6.35Mm Bore Timing Pulley.
Used Widely In Milling Machine, Cnc Engine Lathe, Gear Shaper, Hobbing Machine, Drilling Machine Or Other Machinery Transmission Occassions..
Teeth: 40; Bore Diameter: 6.35Mm; Belt Width: 10Mm.
Features
- Material: Aluminum Alloy; Durable and virtually.
- Teeth: 40; Bore Diameter: 6.35mm; Belt Width: 10mm
- 40 contact with the tooth side which minimizes the risk of the belt slipping.
- Used widely in milling machine, CNC engine lathe, gear shaper, hobbing machine, drilling machine or other machinery transmission occassions.
- Package Content: 1 x XL 6.35mm Bore Timing Pulley
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 2.76 x 2.76 inches
See On Amazon
Looking For Something Else?
Search