uxcell 14mm Reduced Shank Cemented Carbide Twist Drill Bits for Hardened Steel Stainless Steel, 1/2 Inch Straight Shank
Asin: B09X9R1CFQ | Model: a22021600ux0362 | PartNumber: a22021600ux0362
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[Versatile Uses] -Cemented Carbide Drill Bit Can Clean, Accurate Holes In Sheet Metal, Steel, Copper, Brass, Aluminum, Plastic, Wood, Stainless Steel And Cast Iron..
[Use Note] - Please Use Low Speed When Drilling And Note The Temperature Of Carbide Tip Is Not Too High For Extending Drill Bit Life..
[Reduced Shank] - Reduced Shank Twist Drill Bit Can Work With A Electric Drill (Electric Drill Not Included)..
[Features] - Milled U-Flutes With Deep-Cut Spiral Deliver Fast Material Removal. Suitable For Drilling In Tough Metal, Including Abrasive Alloy And Hardened Steel..
Features
- [Cemented Carbide] - Twist drill bits are made of cemented carbide tip for easier drilling into any hard objects, long service life, it is more sharp and durable than others.
- [Features] - Milled U-flutes with deep-cut spiral deliver fast material removal. Suitable for drilling in tough metal, including abrasive alloy and hardened steel.
- [Versatile Uses] -Cemented carbide drill bit can clean, accurate holes in sheet metal, steel, copper, brass, aluminum, plastic, wood, stainless steel and cast iron.
- [Reduced Shank] - Reduced shank twist drill bit can work with a electric drill (electric drill not included).
- [Use Note] - Please use low speed when drilling and note the temperature of carbide tip is not too high for extending drill bit life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 14mm Reduced Shank Cemented
#1
uxcell Reduced Shank Twist Drill Bits 14mm High Speed Steel 4341 with 10mm (3/8") Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CXCFD1 | Model: a19102500ux0063 | PartNumber: a19102500ux0063
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes. Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Chucking Maximizing Security For Precise Holes..
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance. High Cutting Edge Strength, Fast Cutting Speed..
Features
- Features: Cutting Edge Diameter : 14mm / 0.55"; Shank Diameter : 10mm / 3/8"; Cutting Edge Length: 56mm / 2.2"; Total Length : 150mm / 6.0"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. High cutting edge strength, fast cutting speed.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Sharp and spiral cutting edge provides neat and smooth cuts.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Tri-flat on the shank of drills are constructed for tighter chucking maximizing security for precise holes.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell Straight Shank Twist Drill Bit 14mm High Speed Steel 4341 with 10mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CYLSQ9 | Model: a19102500ux0152 | PartNumber: a19102500ux0152
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 14mm / 0.55"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 112mm / 4.41"; Total Length : 160mm / 6.3"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell Reduced Shank Drill Bit 14.5mm High Speed Steel HSS 9341 Black Oxide with 1/2 Inch Straight Shank
Asin: B07KS4GD4R | Model: a18101200ux0139 | PartNumber: a18101200ux0139
Black Oxide Finish - Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Please Note: To Make Clean And Precise Holes, Water Is Required For Lubrication And Cooling When Drilling Metals. Increased Use Of Water Lubrication Will Extend Drill Bit Life.
Wide Application - Design For Drilling In Low And Medium Tensile Strength Materials, Such Aluminum, Iron, Copper, Brass And Metal.
Reduced Shank - Expanding The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Features
- High Speed Steel tool - 14.5mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
- Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 5.51 x 3.94 inches
See On Amazon #4
uxcell Reduced Shank Twist Drill Bits 14mm High Speed Steel 4241 with 10mm Shank for Aluminum Alloy Steel Metal Plastic Wood
Asin: B082CWWBFT | Model: a19102500ux0088 | PartNumber: a19102500ux0088
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Versatile Uses: For Use In A Wide Range Of Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Sharp & Spiral Flutes: Sharp Spiral Flutes Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering High Hardness And Toughness For Wear Resistance. Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant..
Features
- Features: Cutting Edge Diameter : 14mm / 0.55"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 105mm / 4.13"; Total Length : 160mm / 6.3"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering high hardness and toughness for wear resistance. Black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Sharp & Spiral Flutes: Sharp Spiral flutes provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip.
- Versatile Uses: For use in a wide range of aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #5
uxcell Reduced Shank Drill Bit 14mm High Speed Steel HSS 9341 Black Oxide with 1/2 Inch Straight Shank
Asin: B07KS3TF8S | Model: a18101200ux0153 | PartNumber: a18101200ux0153
Black Oxide Finish - Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Please Note: To Make Clean And Precise Holes, Water Is Required For Lubrication And Cooling When Drilling Metals. Increased Use Of Water Lubrication Will Extend Drill Bit Life.
Wide Application - Design For Drilling In Low And Medium Tensile Strength Materials, Such Aluminum, Iron, Copper, Brass And Metal.
Reduced Shank - Expanding The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Features
- High Speed Steel tool - 14mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
- Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 5.51 x 3.94 inches | Weight: 0.00 pounds
See On Amazon #6
uxcell Straight Shank Twist Drill Bits 14mm High Speed Steel 4341 with 10mm Shank 2 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082DBBZ8P | Model: a19102500ux0153 | PartNumber: a19102500ux0153
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 14mm / 0.55"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 112mm / 4.41"; Total Length : 160mm / 6.3"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #7
uxcell High Speed Steel Hex Shank Twist Drill Bit, 14mm Drilling Dia with 1/4 Inch Hex Shank 156mm Length
Asin: B09YV1WT5J | Model: a22032200ux1088 | PartNumber: a22032200ux1088
135-Degree Split Point Tip Design: Can Drill With Less Force And Good Radial Stability. Easier Chip Evacuation, Better Heat Dissipation And Increased Drill Durability..
Quick Change: Compared With The Ordinary Drill, With A Quick Change Hexagonal Handle, Handle Diameter 6.35Mm (1/4 "), Fixture Is More Stable, More Convenient To Replace..
Application: Suitable For Drilling Holes In Alloy Steel, Wood, Nonferrous Metal, Cast Iron And Hard Plastics.
Material: Made Of High Speed Steel With Dual Coating Of Gold Titanium And Black Nitride For Better Lubrication, Smoother Drilling. Increase The Hardness Of The Drill, With Good Wear Resistance And Durability..
Features
- Specification: Shank: 1/4-inch Hex; Drill Diameter: 14mm / 0.55-inch; Total Length: 156mm / 6.14-inch; Drill Bit Length: 105mm / 4.13-inch; 1 x Twist Drill Bits
- Material: Made of high speed steel with dual coating of gold titanium and black nitride for better lubrication, smoother drilling. Increase the hardness of the drill, with good wear resistance and durability.
- 135-degree Split Point Tip Design: Can drill with less force and good radial stability. Easier chip evacuation, better heat dissipation and increased drill durability.
- Application: Suitable for drilling holes in alloy steel, wood, nonferrous metal, cast iron and hard plastics
- Quick Change: Compared with the ordinary drill, with a quick change hexagonal handle, handle diameter 6.35mm (1/4 ), fixture is more stable, more convenient to replace.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell Square Nose End Mill, 14mm Cutting Dia Tungsten Carbide Tip 3 Straight Flutes Milling Cutter with 14mm Straight Shank, 2pcs
Asin: B0B7D8RYTF | Model: a22051600ux0189 | PartNumber: a22051600ux0189
Wide Applications: Suitable For Cutting Alloy Steel, Stainless Steel, Cast Iron, Carbon Steel, Aluminum, Copper, Plastic, Etc.. For Shallow Groove Machining, Side Milling And Finishing..
Tips: Use On Cnc Machining Centers, Milling Machines, Drilling Machine, Lathes And Other High-Speed Cnc Machine Tools. The Longer The Length Of The Tool Clamped By The Chuck, The Better. Select An Appropriate Feed Rate And Cutting Speed..
Features: Square End Cut, 3-Flute Design. Straight Flute Tool Allows Chips To Collect In The Flutes When Cutting, Well Suited For Most Applications In Shallow Cuts. Features Just The Base Substrate Without Any Coatings, Good For General Purpose Cutting In Wide Ranges Of Applications..
Carbide Tip: Tungsten Carbide Tip Has High Hardness, High Strength, Wear Resistance. With Good Milling And Cutting Performance, Carbide Can Run At Higher Speed Than High-Speed Steel..
Features
- Square Nose End Mill: Cutting diameter: 14mm / 0.55"; cutting flute length: 15mm / 0.59"; straight shank diameter: 14mm / 0.55; overall length: 86mm / 3.39"; number of flutes: 3 flutes.
- Carbide Tip: Tungsten carbide tip has high hardness, high strength, wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for cutting alloy steel, stainless steel, cast iron, carbon steel, aluminum, copper, plastic, etc.. For shallow groove machining, side milling and finishing.
- Features: Square end cut, 3-flute design. Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Features just the base substrate without any coatings, good for general purpose cutting in wide ranges of applications.
- Tips: Use on CNC machining centers, milling machines, drilling machine, lathes and other high-speed CNC machine tools. The longer the length of the tool clamped by the chuck, the better. Select an appropriate feed rate and cutting speed.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell Round Steel Metal Rod, 14mm x 100mm High Speed Steel (HSS) Lathe Bar Stock Tool, for Shaft Gear Drill Lathes Boring Machine Turning Miniature DIY Craft
Asin: B0CQTGMLDG
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs..
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed..
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Round Metal Rods: Diameter: 14mm / 0.551"; length: 100mm / 3.94"; hardness: HRC61~63; finish: polished. High-speed steel rod is with combination of hardness and toughness for wear resistance.
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed.
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell Round Steel Rod, 14mm HSS Lathe Bar Stock Tool 150mm Long, for Shaft Gear Drill Lathes Boring Machine Turning Miniature Axle, Cylindrical Pin DIY Craft Tool
Asin: B07T12XS7K | Model: a19050800ux0854 | PartNumber: a19050800ux0854
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Specifications: Diameter: 14mm / 0.55"; length: 150mm / 5.9". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell Cemented Carbide Twist Drill Bits 14.5mm Metal Drill Cutter for Stainless Steel Copper Aluminum Zinc Alloy Iron 2 Pcs
Asin: B085HDRRT1 | Model: a19121700ux0907 | PartNumber: a19121700ux0907
Use For: Drilling Clean, Accurate Holes In Sheet Metal, Steel, Copper, Brass, Aluminum, Plastic, Wood, Stainless Steel And Cast Iron.
Round Shank Design: Round Shank Twist Drill Bit Can Work With A Electric Drill (Excluding In The Item)..
Use Note: Please Use Low Speed When Drilling And Note The Temperature Of Carbide Tip Is Not Too High For Extending Drill Bit Life.
Features: Milled U-Flutes With Deep-Cut Spiral Provides Fast Material Removal. Suitable For Drilling In Tough Metal, Including Abrasive Alloy And Hardened Steel.
Features
- Cemented Carbide Tip: 14.5mm twist drill bits are made of cemented carbide tip for long service life, more sharp and durable than others
- Features: Milled U-flutes with deep-cut spiral provides fast material removal. Suitable for drilling in tough metal, including abrasive alloy and hardened steel
- Use For: Drilling clean, accurate holes in sheet metal, steel, copper, brass, aluminum, plastic, wood, stainless steel and cast iron
- Use Note: Please use low speed when drilling and note the temperature of carbide tip is not too high for extending drill bit life
- Round Shank Design: Round shank twist drill bit can work with a electric drill (Excluding in the item).
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell 15.5mm Reduced Shank Drill Bit HSS 6542 Black Oxide with 1/2 Inch Straight Shank
Asin: B07MQ3TPKY | Model: a18103100ux0179 | PartNumber: a18103100ux0179
Black Oxide Finish - Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Please Note: To Make Clean And Precise Holes, Water Is Required For Lubrication And Cooling When Drilling Metals. Increased Use Of Water Lubrication Will Extend Drill Bit Life.
Wide Application - Design For Drilling In Low And Medium Tensile Strength Materials, Such Aluminum, Iron, Copper, Brass And Metal.
Reduced Shank - Expanding The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Features
- High Speed Steel tool - 15.5mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
- Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 7.48 x 1.57 inches
See On Amazon #13
uxcell 4 Pcs 14mm High Speed Steel HSS Drill Bit Hole Saw for Metal Alloy Wood
Asin: B07HCJ9DMK | Model: a18072800ux0419 | PartNumber: a18072800ux0419
Hole Drill Bit Is With Special Heat Treatment, Sharp Edge, High Strength..
Hole Saw Is Suitable For Hand-Held Electric Drill, Vertical Electric Drill And Mobile Belt Magnetic Drilling Machine..
Perfect For Installing Locks, Knobs In Doors And Cabinets Or Drilling Larger Diameter Holes Through Desks Etc..
14Mm Hole Saw Cut Clean, Round Holes In Iron, Aluminium, Alloy, Plastic, Wood, Etc...
Features
- Hole saw is made of high speed steel, impact resistance, wear resistance.
- 14mm Hole Saw cut clean, round holes in iron, aluminium, alloy, plastic, wood, etc..
- Hole drill bit is with special heat treatment, sharp edge, high strength.
- Perfect for Installing Locks, Knobs in Doors and Cabinets or Drilling Larger Diameter Holes Through Desks Etc.
- Hole Saw is suitable for hand-held electric drill, vertical electric drill and mobile belt magnetic drilling machine.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell 14mm HSS Drill Bit Hole Saw Cutter for Metal Alloy Wood
Asin: B07HCJ7R5Z | Model: a18072800ux0417 | PartNumber: a18072800ux0417 | Ean: 0714998259110 | UPC: 714998259110
Hole Drill Bit Is With Special Heat Treatment, Sharp Edge, High Strength..
Suitable For Hand-Held Electric Drill, Vertical Electric Drill And Mobile Belt Magnetic Drilling Machine..
Perfect For Installing Locks, Knobs In Doors And Cabinets Or Drilling Larger Diameter Holes Through Desks Etc..
14Mm Hole Saw Cut Clean, Round Holes In Iron, Aluminum Plate, Alloy Plate, Plastic Sheet..
Features
- Hole saw is made of HSS high speed steel, impact resistance, wear resistance.
- 14mm Hole Saw cut clean, round holes in iron, aluminum plate, alloy plate, plastic sheet.
- Hole drill bit is with special heat treatment, sharp edge, high strength.
- Perfect for Installing Locks, Knobs in Doors and Cabinets or Drilling Larger Diameter Holes Through Desks Etc.
- Suitable for hand-held electric drill, vertical electric drill and mobile belt magnetic drilling machine.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell 13mm Cutting Dia Cemented Carbide Twist Extra Long Drill Bit with Round Straight Shank for Hardened Steel Stainless Steel, 180mm Length
Asin: B0B7D3B9BY | Model: a22042900ux0266 | PartNumber: a22042900ux0266
[Versatile Uses] -Cemented Carbide Drill Bit Can Drill Holes In Stainless Steel, Die Steel, Titanium Alloy, Cast Steel, Iron, Aluminum Alloy And Copper..
[Use Note] - Please Use Low Speed When Drilling And Note The Temperature Of Carbide Tip Is Not Too High For Extending Drill Bit Life..
[Round Shank] - Straight Round Shank Twist Drill Bit Can Work With An Electric Drill (Electric Drill Not Included)..
[Features] - Milled U-Flutes With Deep-Cut Spiral Deliver Fast Material Removal. Suitable For Drilling In Tough Metal, Including Abrasive Alloy And Hardened Steel..
Features
- [Cemented Carbide] - Twist drill bits are made of cemented carbide tip for easier drilling into any hard objects, long service life, it is more sharp and durable than others.
- [Features] - Milled U-flutes with deep-cut spiral deliver fast material removal. Suitable for drilling in tough metal, including abrasive alloy and hardened steel.
- [Versatile Uses] -Cemented carbide drill bit can drill holes in stainless steel, die steel, titanium alloy, cast steel, iron, aluminum alloy and copper.
- [Round Shank] - Straight round shank twist drill bit can work with an electric drill (electric drill not included).
- [Use Note] - Please use low speed when drilling and note the temperature of carbide tip is not too high for extending drill bit life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #16
uxcell 2 Pcs 14mm High Speed Steel HSS Drill Bit Hole Saw Cutter for Metal Alloy Wood
Asin: B07HBZ8LGC | Model: a18072800ux0418 | PartNumber: a18072800ux0418
Hole Drill Bit Is With Special Heat Treatment, Sharp Edge, High Strength..
Hole Saw Is Suitable For Hand-Held Electric Drill, Vertical Electric Drill And Mobile Belt Magnetic Drilling Machine..
Perfect For Installing Locks, Knobs In Doors And Cabinets Or Drilling Larger Diameter Holes Through Desks Etc..
14Mm Hole Saw Cut Clean, Round Holes In Iron, Aluminium, Alloy, Plastic, Wood, Etc...
Features
- Hole saw is made of high speed steel, impact resistance, wear resistance.
- 14mm Hole Saw cut clean, round holes in iron, aluminium, alloy, plastic, wood, etc..
- Hole drill bit is with special heat treatment, sharp edge, high strength.
- Perfect for Installing Locks, Knobs in Doors and Cabinets or Drilling Larger Diameter Holes Through Desks Etc.
- Hole Saw is suitable for hand-held electric drill, vertical electric drill and mobile belt magnetic drilling machine.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell 14mm Reduced Shank Drill Bit HSS 6542 Black Oxide with 1/2 Inch Straight Shank
Asin: B07MLV72PM | Model: a18103100ux0176 | PartNumber: a18103100ux0176
Black Oxide Finish - Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Please Note: To Make Clean And Precise Holes, Water Is Required For Lubrication And Cooling When Drilling Metals. Increased Use Of Water Lubrication Will Extend Drill Bit Life.
Wide Application - Design For Drilling In Low And Medium Tensile Strength Materials, Such Aluminum, Iron, Copper, Brass And Metal.
Reduced Shank - Expanding The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Features
- High Speed Steel tool - 14mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
- Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 7.48 x 1.57 inches
See On Amazon #18
uxcell Reduced Shank Drill Bit Set, 14mm 14.5mm Titanium Nitride Coated High Speed Steel 4341 Tri-Flat Shank Drilling Tool for Stainless Steel Alloy Copper, 2pcs
Asin: B0C55CYPQG
Special Design: Sharp Spiral Flutes Provide Neat And Smooth Cuts. Spiral Groove Facilitates The Export Of Metal Chip. Reduced Shank Drills Expand The Size Range Capacity Of A Portable Drill Chuck. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Clamping And Precise Drilling..
Tips: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier And Improving Smoothness And Dimensional Accuracy. When Using Hand-Held Electric Drill, The Recommended Speed Is 100-1000Rpm/Min; The Larger The Drilling Diameter, The Slower The Drilling Speed..
Titanium Nitride Coating: Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant Than The Regular Black Surface..
Wide Applications: Widely Used For Drilling Stainless Steel, Aluminum Alloy, Iron, Copper, Wood And Plastic. Used On Electric Hand Drill, Drilling Machine And Bench Drill. Drill Metal With High Hardness Or Foreign Substance, The Rotational Speed Should Be Slower Than Normal Drilling..
Features
- Twist Drill Bit: Cutting edge diameter: 14mm / 0.55", 14.5mm / 0.57", shank diameter: 10mm / 0.39"; Total Length: 150mm / 6.0". Features high hardness, good toughness, high wear resistance, suitable for most general purpose applications.
- Wide Applications: Widely used for drilling stainless steel, aluminum alloy, iron, copper, wood and plastic. Used on electric hand drill, drilling machine and bench drill. Drill metal with high hardness or foreign substance, the rotational speed should be slower than normal drilling.
- Special Design: Sharp spiral flutes provide neat and smooth cuts. Spiral groove facilitates the export of metal chip. Reduced shank drills expand the size range capacity of a portable drill chuck. Tri-flat on the shank of drills are constructed for tighter clamping and precise drilling.
- Titanium Nitride Coating: Gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant than the regular black surface.
- Tips: Suitable lubricant is conducive to cutting or cooling, making cutting easier and improving smoothness and dimensional accuracy. When using hand-held electric drill, the recommended speed is 100-1000rpm/min; the larger the drilling diameter, the slower the drilling speed.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 14.5mm Reduced Shank Drill Bit HSS 6542 Black Oxide with 1/2 Inch Straight Shank
Asin: B07MC2GTH6 | Model: a18103100ux0177 | PartNumber: a18103100ux0177
Black Oxide Finish - Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Please Note: To Make Clean And Precise Holes, Water Is Required For Lubrication And Cooling When Drilling Metals. Increased Use Of Water Lubrication Will Extend Drill Bit Life.
Wide Application - Design For Drilling In Low And Medium Tensile Strength Materials, Such Aluminum, Iron, Copper, Brass And Metal.
Reduced Shank - Expanding The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Features
- High Speed Steel tool - 14.5mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
- Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 7.48 x 1.57 Inches
See On Amazon
Looking For Something Else?
Search