SHEUTSAN 8 Pack Recessed D-Ring Tie Down Anchors, Steel Flush Mount D-Rings, Heavy Duty Recessed Pan Fitting D-Rings for Truck, Trailer, Deliveries, 6,000 Lbs Breaking Strength
Asin: B09XHXVRKD | Ean: 0739224836149 | UPC: 739224836149
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easy To Install - You Will Need A 3 1/2” Hole Saw. First Drill A Hole In The Deck Or Flatbed, Then Fit The Trailer Tie Down Anchors In And Tighten The Mounting Bolts(Not Included). The Recessed Design Allows It To Stay Flush When Not In Use..
Nice Customer Service - Please Check The Package After Receiving The Product. If You Have Any Questions About The Recessed Pan Fitting D-Rings, Pls Feel Free To Contact Us And We Will Actively Reply To You Within 24 Hours!.
Wide Application - This Recessed D-Ring Tie Down Anchor Is Very Useful For Securing Cargo. It Fits Well With Tie Down Straps. The Loop Goes In The Direction Of The Tie Down Strap Tension Direction For Best Strength. Ideal For Trucks, Trailers, Rvs, And Boats For Securing All Kinds Of Heavy Objects..
Solidly Built - These Recessed D-Rings Tie Downs Are Well Constructed And Sturdy. They Are Made Of Steel, Which Is Incredibly Hard And Impact Resistant. The Surface Is Galvanized, Which Can Effectively Block Rusting. It Will Promise A Long Service Life..
Features
- HEAVY DUTY - The steel flush mount d-rings measures 4 x 3.7 inches with 4 1/4-inch round mounting holes. The D-ring is 1.35 inches in diameter. Each recessed D-ring has a high breaking strength of 6,000 lbs and a safe working load limit of 2,000 lbs.
- SOLIDLY BUILT - These recessed D-rings tie downs are well constructed and sturdy. They are made of steel, which is incredibly hard and impact resistant. The surface is galvanized, which can effectively block rusting. It will promise a long service life.
- EASY TO INSTALL - You will need a 3 1/2 hole saw. First drill a hole in the deck or flatbed, then fit the trailer tie down anchors in and tighten the mounting bolts(not included). The recessed design allows it to stay flush when not in use.
- WIDE APPLICATION - This recessed D-ring tie down anchor is very useful for securing cargo. It fits well with tie down straps. The loop goes in the direction of the tie down strap tension direction for best strength. Ideal for trucks, trailers, RVs, and boats for securing all kinds of heavy objects.
- NICE CUSTOMER SERVICE - Please check the package after receiving the product. If you have any questions about the recessed pan fitting d-rings, pls feel free to contact us and we will actively reply to you within 24 hours!
- See more on Amazon...
Brand: SHEUTSAN | Manufacturer: SHEUTSAN
See On Amazon Similar To SHEUTSAN 8 Pack Recessed DRing
#1
Lonffery 8 Pack Recessed D-Ring Tie Down Anchors (6,000 lb. Capacity), Heavy Duty Kit for Trailer or Deliveries
Asin: B0BZRNKV55 | Ean: 0795261188184 | UPC: 795261188184
【6000 Lbs Assembly Break Strength】- These Heavy-Duty D-Rings Are Made Of High Quality Steel With Zinc Coated For Rust And Corrosion Resistance. And Premium Material And Professional Workmanship Make The Products Sturdier And Safer. Each D-Ring Has A 6,000 Lb Break Strength..
【Wide Range For Application】- The D-Ring Is Not Only Necessary In Transportation, But Also In Daily Life. It Has Good Load Bearing Capacity That Can Be Used To Trailer Cars Or Motorcycles That Break Down, To Tie Cartons On Warehouse Pallets, And To Anchor Boats And Marinas At The Dock..
【Installed In A Few Minutes】- These D-Rings Require Routing, Or Cutting A Hole In The Floor By Hole Saw And Chisel. It Can Be Completed In A Few Minutes Which Is Simple And Convenient.When In Use The Ring Portion Raises For Application And Lies Down When Not In Use..
【Protect Goods In Transit】- These D-Ring Anchors Are Ideal To Add Tie Down Points For A Truck, Trailer, Suv, Boat To Carry Heavy Loads Which Protects Cargo From Falling Or Breaking Due To Jolts And Collisions, As Well As Reducing Noise And Shaking. It Solves Worries And Improves Safety Of Transportation..
Features
- 8 Complete Sets of D-rings - The package includes 8 backing support plates in 4-7/8" x 4-1/2", 4 recessed D-rings in 3" x 3-1/4", 16 carriage bolts and 16 self locking nuts. The 1/2 x 1/2 square bolting holes are perfect punch to receive carriage bolts to provide a smooth surface.
- Protect Goods in Transit - These D-Ring anchors are ideal to add tie down points for a truck, trailer, SUV, boat to carry heavy loads which protects cargo from falling or breaking due to jolts and collisions, as well as reducing noise and shaking. It solves worries and improves safety of transportation.
- 6000 lbs Assembly Break Strength - These heavy-duty D-rings are made of high quality steel with zinc coated for rust and corrosion resistance. And premium material and professional workmanship make the products sturdier and safer. Each D-ring has a 6,000 lb break strength.
- Installed in a Few Minutes - These D-rings require routing, or cutting a hole in the floor by hole saw and chisel. It can be completed in a few minutes which is simple and convenient.When in use the ring portion raises for application and lies down when not in use.
- Wide Range for Application - The D-ring is not only necessary in transportation, but also in daily life. It has good load bearing capacity that can be used to trailer cars or motorcycles that break down, to tie cartons on warehouse pallets, and to anchor boats and marinas at the dock.
- See more on Amazon...
Brand: Lonffery | Manufacturer: Lonffery
See On Amazon #2
8 Pack White Plastic Trim Ring 8.6 Inch Diameter and 8 Pairs of Retrofit Recessed Downlight Housing C Clips Combo
Asin: B09S9Q7RLR | Ean: 0738941000338 | UPC: 738941000338
Outer Diameter: 8.625 Inches Inner Diameter: 6.25 Inches.
Designed For A 6 Or 8 Inch Recessed Can Goof Ring Ceiling Light Fixture.
Features
- High Quality White Plastic Trim Ring for Down Lights
- Designed for a 6 or 8 Inch Recessed Can Goof Ring Ceiling Light Fixture
- Outer Diameter: 8.625 inches Inner Diameter: 6.25 inches
- See more on Amazon...
Brand: harrrrd | Manufacturer: HARRRRD
See On Amazon #3
Recessed D-Ring 6,000 lb. Cap. Tiedown w/ Backing Plate - 4 pack
Asin: B002WPXVC0 | Model: 80849-12-44 | PartNumber: 80849-12-44
Instructions Included. D-Ring Specifications: See Diagram In The Photo Gallery..
Installation - These D-Rings Require Routing, Or Cutting A Hole In The Floor. More Details Below..
Backing Plate Is Used For Support Under The Floor Preventing The Bolts From Pulling Through..
Each D-Ring Has A 6,000 Lb Straight Pull Capacity. For Rated Capacity Description - See Below..
Features
- 4 sets of D-rings and backing plates. Both components are zinc coated to inhibit corrosion.
- Each D-ring has a 6,000 lb straight pull capacity. For Rated Capacity Description - see below.
- Instructions included. D-ring SPECIFICATIONS: See diagram in the photo gallery.
- BACKING PLATE is used for support under the floor preventing the bolts from pulling through.
- INSTALLATION - these D-rings require routing, or cutting a hole in the floor. More details below.
- See more on Amazon...
Brand: Mackie | Manufacturer: Mackie Ent Inc
Dimensions: 0.04 x 6.50 x 6.50 inches
See On Amazon #4
Sierra Pacific Engineering Recessed D-Ring 6,000 lb. Cap. Tiedown Attachments w/Backing Plate - 8 Pack
Asin: B07BGBRRFD | Ean: 0713289278427 | UPC: 713289278427
Specifications Of D-Ring: 1) The Base Measures 5" X 4-1/2". 2) Hole Pattern Is 3" X 3-1/2" On Centers. Recessed Dimension Is 3" Diameter With A Flat Edge. 3) The 7/16" Diameter Ring Measures 1-3/4 Center. 4) The Ring Pivots On A 5/16" Threaded Stud. 5) The Pan Has A 1/4" Drainage Hole..
Installation - These D-Rings Require Routing, Or Cutting A Hole In The Floor. We Recommend Creating/Cutting A Template And Then Transferring To The Desired Location. If You Use A 3-1/2" Hole Saw, The D-Ring Will Fit Without Any Further Work. Better Fit - Use A 2-3/4" Hole Saw Then Jigsaw The Flat Edge And Then Bevel The Entire Edge With A Wood Hasp To Create A Snug Fit..
Backing Plate Is Used For Support Under The Floor When Installing The Tiedown Attachments, And Prevents The Bolts From Pulling Through. Specifications: 1) The Backing Plate Measures 6-1/2" X 6-1/2". 2) Thickness Is 11 Gauge (A Little Thinner Than 1/8). 3/8" Holes. 3) 3-1/2" Diameter Cutout. 4) Steel Backing Plate Is Zinc Coated To Inhibit Corrosion..
Each D-Ring Has A 6,000 Lb Straight Pull Capacity. Rated Capacity: Also Known As "Assembly Capacity" Or "Break Strength" Is The Minimum Load A Complete Assembly Can Withstand Before Failure In A Laboratory Pull Test When The Product Is New. Working Load Limit: The Maximum Load Weight A Tie-Down Should Be Subjected To During Normal Use. To Assist In Making The Proper Tie-Down Choice The Federal D.O.T. Requires The W.L.L. To Be 1/3 Of The Rated Capacity..
Features
- 8 complete sets of D-rings and backing plates. Installation instructions included. Both components are zinc coated to inhibit rust and corrosion. The d-rings have square holes punched for receiving carriage bolts, providing a smooth and relatively trip free surface. When in use the ring portion raises for application and lies down when not in use, thus creating a flush surface.
- Each D-ring has a 6,000 lb straight pull capacity. RATED CAPACITY: Also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is NEW. WORKING LOAD LIMIT: The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity.
- SPECIFICATIONS of d-ring: 1) The base measures 5 x 4-1/2. 2) Hole pattern is 3 x 3-1/2 on centers. Recessed dimension is 3 diameter with a flat edge. 3) The 7/16 diameter ring measures 1-3/4 center. 4) The ring pivots on a 5/16 threaded stud. 5) The pan has a 1/4 drainage hole.
- BACKING PLATE is used for support under the floor when installing the tiedown attachments, and prevents the bolts from pulling through. SPECIFICATIONS: 1) The backing plate measures 6-1/2 x 6-1/2. 2) Thickness is 11 gauge (a little thinner than 1/8). 3/8 holes. 3) 3-1/2 diameter cutout. 4) Steel backing plate is zinc coated to inhibit corrosion.
- INSTALLATION - these D-rings require routing, or cutting a hole in the floor. We recommend creating/cutting a template and then transferring to the desired location. If you use a 3-1/2 hole saw, the d-ring will fit without any further work. Better fit - use a 2-3/4 hole saw then jigsaw the flat edge and then bevel the entire edge with a wood hasp to create a snug fit.
- See more on Amazon...
Brand: Sierra Pacific Engineering | Manufacturer: Sierra Pacific Engineering
See On Amazon
Looking For Something Else?
Search