Twotrees PEI Sheet Double Side Textured Smooth 235x235mm PEI Bed for Ender 3 Ender 3 V2 S1 Ender 5 CR20 Genius Mega Pro Aquila C2 S2 X2 Kobra Neptune 2 LK4 Shark V2 Odin-5 F3 Magnetic Print Bed Plate
Asin: B09Y1WDKM9 | Ean: 0772985318578 | UPC: 772985318578
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Easy To Use】For Most Filaments, No Need For Stick Glue, Tape Or Other Adhesive. Good Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is Around 60°C. When The Pei Building Surface Has Cooled, The Print Can Be Easily Removed By Hand By Simply Bending The Spring Steel Pei Slightly. The Maximum Printing Temperature Of Pei Is 120°C, It Is Compatible With Most Of Filament, Such As: Pla/ Asa/ Pla+/ Abs Etc..
【Outstanding Service】If There Is A Issues With The Product You Received, Send Us A Message And We Will Help You Out. If The Product Is Damaged During Use, We Will Replace It With A New One For You. Thanks..
【Compatibility】The Size Of Pei Sheet Is 235*235Mm, Not Warped. It Is Compatible With Most Printers On The Market With A Build Size Of 220*220Mm. It Is Suitable For Ender 3 Series, Ender 5/Pro, Cr 20/Pro, Mega Pro, Kobra, Aquila/C2/S2/X2, Odin-5 F3, Neptune X/2/2S, Mingd D2, Lk4 / Lk4 Pro, B1, A10m/A10t And Other 3D Printers. If Your 3D Printer Has A 235X235mm Heat Bed Platform, This Pei Sheet Is Compatible With Your 3D Printer..
【Easy To Install】Stick The Soft Magnetic Base To The Heating Bed Of Your 3D Printer, Then Put The Stacked Pei Steel Foil Platform On Top And You Are Ready To Use. The Pei Surface Sticks To The Magnet Almost Too Well, It Makes It So Easy To Switch Between Smooth Bottom Surfaces And Textured Bottom Surfaces..
Features
- Kit Includes 1 pcs Double-sided PEI sheet (One side smooth PEI, one side textured PEI). 1 pcs Flexible adhesive backed magnetic base. Double-sided PEI sheets produced using advanced technology.
- Easy to install Stick the soft magnetic base to the heating bed of your 3D printer, then put the stacked PEI steel foil platform on top and you are ready to use. the PEI surface sticks to the magnet almost too well, it makes it so easy to switch between smooth bottom surfaces and textured bottom surfaces.
- Easy to use For most filaments, no need for stick glue, tape or other adhesive. Good adhesion can be achieved when the temperature of the heated bed is around 60 C. When the PEI building surface has cooled, the print can be easily removed by hand by simply bending the spring steel PEI slightly. The maximum printing temperature of PEI is 120 C, it is compatible with most of filament, such as: PLA/ ASA/ PLA+/ ABS etc.
- Compatibility The size of PEI sheet is 235*235mm, not warped. It is compatible with most printers on the market with a build size of 220*220mm. It is suitable for Ender 3 series, Ender 5/Pro, CR 20/Pro, Mega Pro, Kobra, Aquila/C2/S2/X2, Odin-5 F3, Neptune X/2/2S, Mingd D2, LK4 / LK4 Pro, B1, A10M/A10T and other 3D printers. If your 3D printer has a 235x235mm heat bed platform, This PEI sheet is compatible with your 3D printer.
- Outstanding service If there is a issues with the product you received, send us a message and we will help you out. If the product is damaged during use, we will replace it with a new one for you. Thanks.
- See more on Amazon...
Brand: OUYZGIA | Manufacturer: OUYZGIA
See On Amazon Similar To Twotrees PEI Sheet Double Side
#1
Twotrees Double Sided Textured PEI Build Plate Set 235mm x 235mm Magnetic Spring Steel Printing Bed for Creality K1/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 Neo/Voxelab 3D Printer
Asin: B0CHMG9SPG
【Durable Application】 Our Plate Is More Durable And Can Handle The Tough Conditions Of 24/7 Printing. Our Magnet Can Also Sustain Higher Temperatures Of Up To 120°C, Making It Perfect For Materials Like Pla, Petg, Abs, Tpu, Asa, Nylon, And Pc.Etc..
【Wide Application】The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch) With 2 Holes. After Installing The Print Bed, Please Re-Level It To Improve The Printing Effect. , It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 Pro,Ender 3 Neo,Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers.
【Easy To Use】 Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. The Surface Is Flexible And Easily Removed. When The Temperature Of The Heated Bed Reaches Room Temperature, Prints Come Off The Surface Easily. If The Print Is Still Stuck, You Can Remove The Upper Magnetic Surface From The Lower One, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
【Double Sidetextured Pei Sheet】Double Sided Textured Pei Spring Steel Sheet Coating Adopts High Temperature Spraying Process, The Coating Of The Printing Plate Is Not Easy To Fall Off And Scratch. It Bends Thousands Of Times Without Being Out Of Shape..
Features
- Excellent adhesion With thie PEI Sheet you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. No need to worry about the model sticking with 60 bed temperature.
- Double SideTextured PEI Sheet Double sided textured PEI spring steel sheet coating adopts high temperature spraying process, the coating of the printing plate is not easy to fall off and scratch. It bends thousands of times without being out of shape.
- Durable Application Our plate is more durable and can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of up to 120 C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and PC.etc.
- Easy To Use Withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is flexible and easily removed. When the temperature of the heated bed reaches room temperature, prints come off the surface easily. If the print is still stuck, you can remove the upper magnetic surface from the lower one, bend the flexible surface and watch the model fall right into your hands.
- Wide Application The size of Ender 3 PEI is 235*235mm 9.25*9.25inch) with 2 holes. After installing the print bed, please re-level it to improve the printing effect. , it is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers
- See more on Amazon...
Brand: Twotrees | Manufacturer: Twotrees
See On Amazon
Looking For Something Else?
Search