Dokili Aluminum Intake Manifold Dual Plane Low Rise for Ford SBF 260 289 302 Small Block
Asin: B09YH643VB | Model: CY0502 | PartNumber: CY0502
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Dual Plane】Dual Plane Designs Have Two Smaller Plenums That Receive Air From The Carburetor Or Throttle Body, Which Results In A Higher Velocity Through The Booster Making The Engine More Responsive To The Driver..
【Application】Dokili Intake Manifolds Are Ideal For Passenger Cars, Trucks, 4X4s, Tow Vehicles And Rvs. Choosing The Right Intake Manifold Will Optimize Your Engines Performance And Your Driving Experience..
【Premium Material】Built With Natural Finish Aluminum Of Superb Quality And Fit. Angles And Straightness Comparable To Factory Manifolds..
【Feature】Dokili Intake Manifold Comes With Low-Rise And Dual-Plane Designs. This Combination Boosts Torque Over A Wide Rpm Range, From Idle To 5,500 Rpm. It Features A Standard Square Bore Carb, Featuring Nitrous Bosses As Well As Four Corner Water Ports And Dual Distributor Tie Downs..
Features
- Fitment Dokili aluminum intake manifold for Ford SBF 260 289 302.
- Feature Dokili intake manifold comes with low-rise and dual-plane designs. This combination boosts torque over a wide RPM range, from idle to 5,500 RPM. It features a standard square bore carb, featuring nitrous bosses as well as four corner water ports and dual distributor tie downs.
- Dual plane Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver.
- Premium Material Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds.
- Application Dokili intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. Choosing the right intake manifold will optimize your engines performance and your driving experience.
- See more on Amazon...
Brand: Dokili | Manufacturer: Dokili
See On Amazon Similar To Dokili Aluminum Intake Manifold Dual
#1
NIBBI Orginal High Performance CQR Intake Manifold Air Joint Boot Connector For Motorcycle Motorcross Dirt Bike Kawasaki CQR250 CRF
Asin: B07PCN9MQW | Ean: 0635028033855 | UPC: 635028033855
Mounting Holes: 62Mm(Bolt To Bolt).
Rubber Side: 33Mm, And Rubber Joint Is 1 3/8 Inch.
33Mm Rubber Fit For 26Mm 28Mm 30Mm Carburetor..
Features
- CQR Intake Manifold Air Joint Boot Connector For Motorcycle Motorcross Dirt Bike Kawasaki CQR250 CRF
- 33mm rubber fit for 26mm 28mm 30mm carburetor.
- Mounting Holes: 62mm(Bolt to Bolt)
- Rubber Side: 33mm, and rubber joint is 1 3/8 inch
- See more on Amazon...
Brand: nibbi | Manufacturer: NIBBI
See On Amazon #2
Dokili 1406 Carburetor for 600 CFM 4 Barrel AFB-Style Square Bore Compatible with G.MC Silverado Corvette Mustang Pickup Truck Electric Choke
Asin: B0BNTZ3FWQ | Model: 1406 | PartNumber: 1406
【Function】This Great Carb Runs Flawlessly With Way More Power And Even Smoother Than The Original. For Small And Some Large Engines To Get Good Street Performance And Fuel Economy. It Is Not Affected By Engine Flashback That Means There Is No Power Valve To Blow Out, And The Rod Can Be Replaced In A Few Seconds Without Removing The Carburetor..
【Package Includes】1 X 1406 Carburetor, 1X Square-Bore Base Gasket, 1 X Horn Gasket, 1 X Air Cleaner Stud, 4 X Clamps, 1 X Fuel Line, 1 X Red Choke Positive Wire (Electric Choke Carburetors Only), 1 X Black Choke Ground Wire (Electric Choke Carburetors Only) And Other Necessary..
【Note】This Carb Does Not Fit Computer Control Applications, Like General Motors’ Vehicles Equipped With Q-Jet Carburetor In 1981 And Later And Some Ford Vehicles Equipped With Automatic Overdrive (Aod) Transmission In 1981 And Later..
【Design】This Carburetor Is Deisgned For Electric Choke With Two-Piece All Aluminum Structure, With Lower Working Temperature, Less Warpage And Better Durability. The Dual-Plane High Rise Design Means No Gasket And No Leakage Operation Below The Fuel Level..
Features
- Fitment Dokili 1406 Carburetor is direct replacement for 600 CFM 4 Barrel Square Bore Corvette Silverado G.MC. The manifold is not equipped with EGR and has no provisions for exhaust heated chokes, compatible with various intake manifolds, such as performer EPS, performer RPM, RPM Air Gap, Torker II and other similar designs.
- Design This carburetor is deisgned for electric choke with two-piece all aluminum structure, with lower working temperature, less warpage and better durability. The dual-plane high rise design means no gasket and no leakage operation below the fuel level.
- Function This great carb runs flawlessly with way more power and even smoother than the original. For small and some large engines to get good street performance and fuel economy. It is not affected by engine flashback that means there is no power valve to blow out, and the rod can be replaced in a few seconds without removing the carburetor.
- Note This carb does not fit computer control applications, like general motors vehicles equipped with Q-Jet carburetor in 1981 and later and some Ford vehicles equipped with automatic overdrive (AOD) transmission in 1981 and later.
- Package Includes 1 x 1406 carburetor, 1x square-bore base gasket, 1 x horn gasket, 1 x air cleaner stud, 4 x clamps, 1 x fuel line, 1 x Red choke positive wire (Electric choke carburetors only), 1 x Black choke ground wire (Electric choke carburetors only) and other necessary.
- See more on Amazon...
Brand: Dokili | Manufacturer: dokili
Dimensions: 5.90 x 10.20 x 7.50 inches
Warranty: 1 year
See On Amazon #3
Dokili Dual Plane Carbureted Intake Manifold for G.M LS1 LS2 LS6 Satin Holle.y 300-130
Asin: B0B7N5SJX9
【Premium Material】Built With Natural Cast Finish Aluminum Of Superb Quality And Fit. Angles And Straightness Comparable To Factory Manifolds. It Features Optimized Runner Layout And Constant Cross Sectional Area With Best Vehicle Performance..
【Package Includes】1X Intake Manifold, Mounting Bolts & Washers, Viton O-Rings..
【Dual Plane】Dual Plane Designs Have Two Smaller Plenums That Receive Air From The Carburetor Or Throttle Body, Which Results In A Higher Velocity Through The Booster Making The Engine More Responsive To The Driver..
【Features】Dokili Intake Manifold Comes With Dual-Plane Design, Which Boosts Torque Over A Wide Rpm Range, From 1.500 To 6,500 Rpm. 4150 Square Bore Flange With Minimum Height Fits In Vehicles That Did Minimal Or No Hood Modifications..
Features
- Fitment Dokili Cast aluminum intake manifold for G. LS1 LS2 LS6 Engines, Holley 300-130.
- Features Dokili intake manifold comes with dual-plane design, which boosts torque over a wide RPM range, from 1.500 to 6,500 RPM. 4150 square bore flange with minimum height fits in vehicles that did minimal or no hood modifications.
- Premium Material Built with natural cast finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds. It features Optimized runner layout and constant cross sectional area with best vehicle performance.
- Dual plane Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver.
- Package Includes 1X Intake Manifold, Mounting Bolts & Washers, Viton O-rings.
- See more on Amazon...
Brand: Dokili | Manufacturer: Dokili
Dimensions: 5.51 x 16.42 x 13.39 inches
See On Amazon #4
NIBBI Racing Parts Replacement High Performance GY6 Intake Manifold Intake Manifold Boot for GY6 Engine Scooter 125CC 150CC
Asin: B07KR24LDF | Model: Intake Manifold-01 | PartNumber: Intake Manifold-01 | Ean: 5067491200604, 0192242952800 | UPC: 192242952800
Bolt Ctc: 45Mm.
Opening Diameter:22Mm(7/8)The Second Picture Show.
33Mm Rubber Fit For Pe24mm 26Mm 28Mm 30Mm Pwk24mm 26Mm 28Mm Carburetor.
Features
- Fit for GY6 125CC 150CC Scooter
- 33mm rubber fit for PE24mm 26mm 28mm 30mm PWK24mm 26mm 28mm Carburetor
- Bolt CTC: 45mm
- Opening diameter:22mm(7/8)the second picture show
- See more on Amazon...
Brand: nibbi | Manufacturer: NIBBI RACING PARTS
See On Amazon #5
Dokili 1405 Carburetor for 600 CFM 4 Barrel Square Bore Compatible with G.MC Corvette Silverado 366 Demon Poly Manual Choke
Asin: B0BNV86YVJ | Model: 1405 | PartNumber: 1405
【Function】This Great Carb Runs Flawlessly With Way More Power And Even Smoother Than The Original. For Small And Some Large Engines To Get Good Street Performance And Fuel Economy. It Is Not Affected By Engine Flashback That Means There Is No Power Valve To Blow Out, And The Rod Can Be Replaced In A Few Seconds Without Removing The Carburetor..
【Package Includes】1 X 1405 Carburetor, 1 X Square-Bore Base Gasket, 1 X Horn Gasket, 1 X Air Cleaner Stud, 4 X Clamps, 1 X Fuel Line And Other Accessory..
【Note】This Carb Does Not Fit Computer Control Applications, Like General Motors’ Vehicles Equipped With Q-Jet Carburetor In 1981 And Later And Some Ford Vehicles Equipped With Automatic Overdrive (Aod) Transmission In 1981 And Later..
【Design】This Carburetor Is Deisgned For Manual Choke With Two-Piece All Aluminum Structure, With Lower Working Temperature, Less Warpage And Better Durability. The Dual-Plane High Rise Design Means No Gasket And No Leakage Operation Below The Fuel Level..
Features
- Fitment Dokili 1405 Carburetor is direct replacement for 600 CFM 4 Barrel Square Bore Corvette Silverado G.MC 366 Demon Poly. The manifold is not equipped with EGR and has no provisions for exhaust heated chokes, compatible with various intake manifolds, such as performer EPS, performer RPM, RPM Air Gap, Torker II and other similar designs, With both timed and full vacuum ports for ignition advance.
- Design This carburetor is deisgned for manual choke with two-piece all aluminum structure, with lower working temperature, less warpage and better durability. The dual-plane high rise design means no gasket and no leakage operation below the fuel level.
- Function This great carb runs flawlessly with way more power and even smoother than the original. For small and some large engines to get good street performance and fuel economy. It is not affected by engine flashback that means there is no power valve to blow out, and the rod can be replaced in a few seconds without removing the carburetor.
- Note This carb does not fit computer control applications, like general motors vehicles equipped with Q-Jet carburetor in 1981 and later and some Ford vehicles equipped with automatic overdrive (AOD) transmission in 1981 and later.
- Package Includes 1 X 1405 Carburetor, 1 X Square-bore Base Gasket, 1 X Horn Gasket, 1 X Air Cleaner Stud, 4 X Clamps, 1 x Fuel Line and other accessory.
- See more on Amazon...
Brand: Dokili | Manufacturer: dokili
Dimensions: 4.33 x 10.63 x 7.09 inches
Warranty: 1 year
See On Amazon #6
Skunk2 Racing 307-05-0260 Pro Series Silver Intake Manifold for Honda D-Series Engines
Asin: B008M5JR1S | Model: 307-05-0260 | PartNumber: 307-05-0260 | Ean: 0873265000425 | UPC: 873265000425
Improved Airflow And Enhanced Venturi Effect.
**Not Compatible With Oem D-Series Throttle Body. Must Use Larger-Bore Skunk2 Throttle Body Or Similar.
Fitment: 1988 - 2000 Honda Civic (1.6L Cx/Dx/Ex/Gx/Hx/Lx), 1993 - 1997 Honda Del Sol (1.6L S/Si) And 1988 - 1991 Honda Cr-X (1.6L S/Si).
66Mm Throttle Body Opening Can Be Port-Matched Up To 70Mm.
Ideal For Turbocharged And Naturally Aspirated Applications.
Bolt-On Fitment Compatible With All Oem Sensors.
Larger Plenum And Oversized Runners For Maximum Power Gains.
Features
- Made from highest quality A356 cast-aluminum
- Larger Plenum and oversized runners for maximum power gains
- Improved airflow and enhanced venturi effect
- Bolt-on fitment compatible with all OEM sensors
- 66mm throttle body opening can be port-matched up to 70mm
- Ideal for turbocharged and naturally aspirated applications
- **Not compatible with OEM D-series throttle body. Must use larger-bore Skunk2 throttle body or similar
- Fitment: 1988 - 2000 Honda Civic (1.6L CX/DX/EX/GX/HX/LX), 1993 - 1997 Honda Del Sol (1.6L S/Si) and 1988 - 1991 Honda CR-X (1.6L S/Si)
- See more on Amazon...
First Available: 03/16/2013
Brand: Skunk2 Racing | Manufacturer: Skunk2
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 5.00 pounds
Warranty: Skunk2 Racing warrants all products to be free from defects in materials and workmanship for normal use and service, regardless of mileage, for a period not to exceed 12 months from the original date of retail purchase. Parts returned must be determined by Skunk2 Racing to be defective prior to any warranty credit or replacement is issued. Skunk2 Racing's obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer.
See On Amazon #7
Podoy Intake Manifold 150cc for GY6 125cc Go Kart ATV Moped Dune Buggy Scooter
Asin: B0072IDARI | Model: EXHS-0003 | PartNumber: EXHS-0003 | Ean: 0738435022181 | UPC: 738435022181
Fits Most 110Cc 125Cc 150Cc Chinese Atvs, Go Karts, Scooters, Mopeds With Gy6 4 Stroke Engine，Non Original Aftermarket Part.
Dimensions: Engine Mount Inner Diameter: 22Mm Carburetor Mount Inner Diameter: 30Mm Bolting Hole Distance: 45Mm.
Features
- Fits for GY6 125cc 150cc Scooters Go Karts ATV Moped Scooter Dune Buggy
- Dimensions: Engine mount inner diameter: 22mm Carburetor mount inner diameter: 30mm Bolting Hole Distance: 45mm
- Fits most 110cc 125cc 150cc Chinese ATVs, go karts, scooters, mopeds with GY6 4 stroke engine Non original aftermarket part
- See more on Amazon...
Brand: Podoy | Manufacturer: Podoy
Weight: 0.18 pounds
See On Amazon #8
Skunk2 Racing 307-05-0290 Pro Series Silver Intake Manifold for Honda B-Series VTEC Engines
Asin: B008M5JTA2 | Model: 307-05-0290 | PartNumber: 307-05-0290 | Ean: 0873265000456 | UPC: 873265000456
Improved Airflow And Enhanced Venturi Effect.
Eliminated Secondary Butterflies For Improved Airflow And Horsepower.
Fitment: 1999 - 2000 Honda Civic (1.6L Si), 1994 - 1997 Honda Del Sol (1.6L Vtec) And 1992 - 2001 Acura Integra (1.8L Type R).
70Mm Throttle Body Opening Can Be Port-Matched Up To 74Mm.
Ideal For Turbocharged And Naturally Aspirated Applications.
Bolt-On Fitment Compatible With All Oem Sensors.
Larger Plenum And Oversized Runners For Maximum Power Gains.
Features
- Made from the highest quality A356 cast-aluminum
- Larger Plenum and oversized runners for maximum power gains
- Improved airflow and enhanced venturi effect
- Bolt-on fitment compatible with all OEM sensors
- 70mm throttle body opening can be port-matched up to 74mm
- Ideal for turbocharged and naturally aspirated applications
- Eliminated secondary butterflies for improved airflow and horsepower
- Fitment: 1999 - 2000 Honda Civic (1.6L Si), 1994 - 1997 Honda Del Sol (1.6L VTEC) and 1992 - 2001 Acura Integra (1.8L Type R)
- See more on Amazon...
First Available: 03/16/2013
Brand: Skunk2 Racing | Manufacturer: Skunk2
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 40.00 pounds
Warranty: Skunk2 Racing warrants all products to be free from defects in materials and workmanship for normal use and service, regardless of mileage, for a period not to exceed 12 months from the original date of retail purchase. Parts returned must be determined by Skunk2 Racing to be defective prior to any warranty credit or replacement is issued. Skunk2 Racing's obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer.
See On Amazon #9
Dokili Single Plane Carb Intake Manifold for G.M LS1 LS2 LS6 Black 300-132
Asin: B0B7MKS6JD
【Features】4150 Square Bore Flange With Minimum Height Fits In Vehicles That Did Minimal Or No Modifications. This Manifold Is For Centrifugal Blower/Turbocharged/Nos Power Adder Apps..
【Package Includes】1X Intake Manifold, Mounting Bolts & Washers, Viton O-Rings..
【Premium Material】Built With Black Coated Cast Aluminum Of Superb Quality And Fit, This Intake Is Corrosion Resistant And Durable. Angles And Straightness Comparable To Factory Manifolds..
【Advantages】Dokili Intake Manifold Comes With Single-Plane Design With A Wide Rpm Range From 2.500 To 7,500 Rpm. It Features Optimized Runner Layout And Constant Cross Sectional Area With Best Vehicle Performance..
Features
- Fitment Dokili aluminum intake manifold for G. LS1 LS2 LS6 Engines, H.olley 300-132.
- Advantages Dokili intake manifold comes with single-plane design with a wide RPM range from 2.500 to 7,500 RPM. It features Optimized runner layout and constant cross sectional area with best vehicle performance.
- Features 4150 square bore flange with minimum height fits in vehicles that did minimal or no modifications. This manifold is for centrifugal blower/turbocharged/NOS power adder apps.
- Premium Material Built with black coated cast aluminum of superb quality and fit, this intake is Corrosion resistant and durable. Angles and straightness comparable to factory manifolds.
- Package Includes 1X Intake Manifold, Mounting Bolts & Washers, Viton O-rings.
- See more on Amazon...
Brand: Dokili | Manufacturer: Dokili
Dimensions: 4.72 x 16.34 x 13.19 inches
See On Amazon #10
Dokili Aluminum Intake Manifold Small Block Air Gap for SBC Vortec 350 1996-up
Asin: B09YHBSJZW | Model: CY0500 | PartNumber: CY0500
【Premium Material】Built With Natural Finish Aluminum Of Superb Quality And Fit. Angles And Straightness Comparable To Factory Manifolds. Port Size Measures 2.06" X 1.18" And Intake Measures 4.65" Tall..
【Air Gap】The Air Gap Design Allows Air To Flow Under The Plenum To Prevent Heat Transfer From The Engine Resulting In More Horsepower..
【Dual Plane】The Intake Is Square Bore Style And Works With All 4150 Holley Style Carburetors. Dual Plane Designs Have Two Smaller Plenums That Receive Air From The Carburetor Or Throttle Body, Which Results In A Higher Velocity Through The Booster Making The Engine More Responsive To The Driver..
【Features】Dokili Intake Manifold Comes With 180° High Rise And Dual-Plane Designs, Providing Excellent High Rpm Power, From 1,500 To 6,500 Rpm. It Features Four Corner Water Outlets, Dual Distributor Hold Down Provisions, Accepting Late Model Water Neck, A/C, Alternator And Hei Brackets..
Features
- Fitment Dokili aluminum intake manifold is compatible with 96+ Vortec engines.
- Features Dokili intake manifold comes with 180 high rise and dual-plane designs, providing excellent high RPM power, from 1,500 to 6,500 rpm. It features four corner water outlets, dual distributor hold down provisions, accepting late model water neck, A/C, alternator and HEI brackets.
- Premium Material Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds. Port size measures 2.06 x 1.18 and intake measures 4.65 tall.
- Dual Plane The intake is square bore style and works with all 4150 Holley style carburetors. Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver.
- Air Gap The air gap design allows air to flow under the plenum to prevent heat transfer from the engine resulting in more horsepower.
- See more on Amazon...
Brand: Dokili | Manufacturer: Dokili
Dimensions: 4.72 x 9.06 x 5.91 Inches
See On Amazon
Looking For Something Else?
Search