uxcell 5 Pcs 1mm Mini Micro Twist Drill Bits, High-Speed Steel Straight Shank Extra Long Drill Bit 80mm for Aluminum Alloy
Asin: B09YH826HW | Model: a22022400ux0855 | PartNumber: a22022400ux0855
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Extended Drill：The Jobber Extended Drill Is Suitable For A Wide Range Of Applications, Allowing You To Access Hard-To-Reach Areas Where Ordinary Drills Cannot. High Hardness, Sharp Twist Drill Bits Will Make Drilling Easier And More Efficient..
Notice: Please Keep It Cool And Gentle When Using It, The Correct Use Can Greatly Extend The Life Of The Twist Drill..
Twisted Design: Split Point Tip And Twist Design Increases Cutting Speed While Easily Self-Centering To Prevent Movement. The Twisted Design Of The Drill Bit Quickly Removes Drilled Chips, Then Leaving A Smooth Hole..
High Speed Steel: Made Of High-Speed Steel, With High Hardness, Heat Resistance, Wear Resistance, Durability And Long Service Life..
Features
- Specification: Drill Bit Diameter: 1mm / 0.04-inch, Flute Length: 50mm / 1.97-inch, Shank Diameter: 1mm / 0.04-inch, Total Length: 80mm / 3.15-inch; 5 x Mini Drill Bits
- High Speed Steel: Made of high-speed steel, with high hardness, heat resistance, wear resistance, durability and long service life.
- Extended Drill The jobber extended drill is suitable for a wide range of applications, allowing you to access hard-to-reach areas where ordinary drills cannot. High hardness, sharp twist drill bits will make drilling easier and more efficient.
- Twisted Design: Split point tip and twist design increases cutting speed while easily self-centering to prevent movement. The twisted design of the drill bit quickly removes drilled chips, then leaving a smooth hole.
- Notice: Please keep it cool and gentle when using it, the correct use can greatly extend the life of the twist drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 5 Pcs 1mm Mini
#1
XBVV 1020 Pcs O Ring Kit 20 Size Nitrile Rubber Oring Assortment Set for Car Auto Vehicle Repair Faucet Plumbing Air or Gas Sealing Connections Resist Oil and Heat
Asin: B0CBTYXVCV | Ean: 0656485342496 | UPC: 656485342496
Wide Applications: O-Ring Classification Is Very Suitable For Faucets, High-Pressure Washers, Motorcycles, Boats, Car Engines, Pumps, Solenoid Valves, Meters, Sensors, Mechanical Bearings, Pressure Pipes And Other Accessories For Sealing Diy Repairs.
Quality Service: Xbvv Always Provides Quality Customer Service To Make You Feel Comfortable With Your Purchase. If You Have Any Questions About The O-Ring Assortment Kit, Please Feel Free To Contact Us. We Will Be Happy To Serve You.
Easy To Use And Store: Various O-Ring Kits, 20 Sizes Of O-Rings Are Placed In Order In A Sturdy Plastic Storage Box, Each Size Comes With A Detailed Label Paper, Very Easy To Use, O-Rings Are Stored In Order Of Size, Easy To Retrieve And Store.
High Quality Material: O-Ring Bushings Are Made Of Commercial Grade Nbr Material With A Working Temperature Range Of -40℉/-40℃ To 248℉/120℃. With Excellent Resistance To High And Low Temperatures, It Is Very Suitable For Thermal Machinery, Automotive, And Faucet Pipe Sealing Repair.
Features
- Multiple Sizes:o-ring assortment kit contains standard 20 metric rubber o-rings, o-rings with inner diameters from 1 to 25mm and thicknesses of 1mm, 2mm, 2.4mm, 2.5mm, 3mm, which can meet almost all of your needs
- High quality material: O-ring bushings are made of commercial grade NBR material with a working temperature range of -40 /-40 to 248 /120 . With excellent resistance to high and low temperatures, it is very suitable for thermal machinery, automotive, and faucet pipe sealing repair
- Wide applications: O-ring classification is very suitable for faucets, high-pressure washers, motorcycles, boats, car engines, pumps, solenoid valves, meters, sensors, mechanical bearings, pressure pipes and other accessories for sealing DIY repairs
- Easy to use and store: Various o-ring kits, 20 sizes of o-rings are placed in order in a sturdy plastic storage box, each size comes with a detailed label paper, very easy to use, o-rings are stored in order of size, easy to retrieve and store
- Quality Service: XBVV always provides quality customer service to make you feel comfortable with your purchase. If you have any questions about the O-ring assortment kit, please feel free to contact us. We will be happy to serve you
- See more on Amazon...
Brand: XBVV | Manufacturer: XBVV
Weight: 0.36 pounds
See On Amazon #2
uxcell Stainless Steel C-Clamp with 0.79 Inch Wide Jaw Opening for Woodworking Welding Building Household Mount 4 Pcs
Asin: B0B1VJPFVD | Model: a22030500ux0036 | PartNumber: a22030500ux0036
Easy Installation - With Adjustable Positioning Screws, The Screws Can Be Adjusted As Needed, Which Is Simple And Convenient To Use..
Widely Used - For General Clamping Needs, For Assembly, Fastening, Bonding And Welding In Metalworking, Designed For Woodworker, Welder, And Construction Worker..
Design - I-Beam Frame Provides Strength; Special Clamping Pads That Apply Pressure Evenly And Prevent Damage When Turning The Screw..
Durable To Use - Made Of Stainless Steel, Corrosion-Resistant, Rust-Resistant, U Clamps Is 0.18 Inches Thick, Strong And Not Easy To Break..
Features
- Clamping Range - 0 ~ 14mm (0" ~ 0.55").
- Durable to Use - Made of stainless steel, corrosion-resistant, rust-resistant, U clamps is 0.18 inches thick, strong and not easy to break.
- Easy installation - With adjustable positioning screws, the screws can be adjusted as needed, which is simple and convenient to use.
- Design - I-beam frame provides strength; Special clamping pads that apply pressure evenly and prevent damage when turning the screw.
- Widely Used - For general clamping needs, for assembly, fastening, bonding and welding in metalworking, designed for woodworker, welder, and construction worker.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell 0.9mm Hex Key Wrench, L Shaped CR-V Repairing Tool 5 Pcs
Asin: B09JFRQ7NN | Model: a21080900ux0110 | PartNumber: a21080900ux0110
[Chamfered End] - Insert Smoothly Into The Fastener Head, Reducing Wear On The Wrench And Fastener Head..
[Widely Use] - To Remove And Install Socket Cap Screws Found In Towel Bar, Door Handle, Assembling Furniture, Equipment, And More..
[Long Arm / Short Arm] - Offers Extended Range On One End And Extra Leverage On The Other..
[Durable Construction] - Heat Treated Chrome Vanadium Alloy Steel Drop Forged Body Provides Hardness, High Torque And Toughness. With Nickel-Plated Finish For Anti-Rust And Wear-Resistant..
Features
- [Size] - 0.9mm hexagon head, 1.34" (34mm) total length.
- [Durable Construction] - Heat treated chrome vanadium alloy steel drop forged body provides hardness, high torque and toughness. With nickel-plated finish for anti-rust and wear-resistant.
- [Chamfered End] - Insert smoothly into the fastener head, reducing wear on the wrench and fastener head.
- [Long Arm / Short Arm] - offers extended range on one end and extra leverage on the other.
- [Widely Use] - To remove and install socket cap screws found in towel bar, door handle, assembling furniture, equipment, and more.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell Wire Diameter 0.047", OD 0.31", Free Length 1.97" Spring Steel Coil Extended Compressed Spring 10pcs
Asin: B07MHGKV4C | Model: a18111200ux0239 | PartNumber: a18111200ux0239
Spring Steel Offers Good Mechanical Properties With Greater Corrosion And Heat Resistance Than Music Wire.
Made Of Alloy Spring Steel , Features High Elasticity And Good Precision, Installed Small Size And Generate Strong Force..
General Use Spring Equipment Tools Etc.Can Not Be Used Outdoor..
Package Content: 10Pcs X Compressed Spring.
Features
- Wire Diameter: 1.2mm/0.047"; Outer Diameter: 8mm/0.31"(OD); Free Length: 50mm/1.97"
- Package Content: 10pcs x Compressed Spring
- Spring steel offers good mechanical properties with greater corrosion and heat resistance than music wire
- General use spring equipment tools etc.Can not be used outdoor.
- Made of Alloy spring steel , features high elasticity and good precision, installed small size and generate strong force.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 3.94 x 1.97 inches
See On Amazon #5
uxcell 1mm Diamond Twist Drill Bits High Speed Steel for Glass Sea Shells Stone Tiles 10 Pcs
Asin: B07R76ZZG4
[Applicable Machine] - Widely Used In Rotary Tool Such As Hand Drills, Drill Press, Flex Shafts, Bench Drill And Hanging Mill..
[Notice] - When Drilling, It Is Necessary To Add Cutting Fluid In Time To Lubricate And Cool Down, Which Can Get A Better Drilling Hole Wall, Extends The Service Life And Drilling Accuracy..
[Application] - Suitable For Drilling Small Holes On Glass, Soft Metal, Sea Shells, Jade, Pearls, Drywall And Son On..
[Material] - Diamond Coated High Speed Steel(Hss) Is Made By Spiral Technology, Has Both Toughness And Hardness, Is Not Easy To Break. The Drill Bit Is Sharp, And Is Easy For Chip Removal..
Features
- [SIZE] - 1mm diameter, 11mm length twist drill bit with 0.7mm shank.
- [MATERIAL] - Diamond coated high speed steel(HSS) is made by spiral technology, has both toughness and hardness, is not easy to break. The drill bit is sharp, and is easy for chip removal.
- [APPLICABLE MACHINE] - Widely used in rotary tool such as hand drills, drill press, flex shafts, bench drill and hanging mill.
- [APPLICATION] - Suitable for drilling small holes on glass, soft metal, sea shells, jade, pearls, drywall and son on.
- [NOTICE] - When drilling, it is necessary to add cutting fluid in time to lubricate and cool down, which can get a better drilling hole wall, extends the service life and drilling accuracy.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell M2.5 x 8mm Flat Head Phillips Self Tapping Screws Fasteners Black 100pcs
Asin: B01MXQ71K7 | Model: a16101200ux0187 | PartNumber: a16101200ux0187
Head Size: 4.0 X 1Mm / 0.16" X 0.04"(D*T); Bit Driver Size: 2.5Mm / 0.1"; Drive Type: Phillips.
Main Color: Black; Overall Size: 4.0 X 8Mm / 0.16" X 0.3"(Head D* L).
Coating: Black Oxide Plated; Fastener Type: Self Tapping Screws.
Weight: 22G; Package Content: 100(+/-2%)Pcs X Phillips Self Tapping Screw; Thread Size: 2.5 X 6.5Mm / 0.1" X 0.25"(D*L).
Features
- Head Style: Flat Head; Material: Metal; Product Name: Phillips Self Tapping Screw
- Weight: 22g; Package Content: 100(+/-2%)pcs x Phillips Self Tapping Screw; Thread Size: 2.5 x 6.5mm / 0.1 x 0.25(D*L)
- Head Size: 4.0 x 1mm / 0.16 x 0.04(D*T); Bit Driver Size: 2.5mm / 0.1; Drive Type: Phillips
- Coating: Black Oxide Plated; Fastener Type: Self Tapping Screws
- Main Color: Black; Overall Size: 4.0 x 8mm / 0.16 x 0.3(Head D* L)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #7
Zorfeter 20 Pcs 000# White Solid Rubber Stoppers Tapered Lab Plugs, Dia. 13mm x Dia. 8mm - Height 17mm
Asin: B09MLHHXX5 | Model: GF211126-02 | PartNumber: GF211126-02
Tapered Design - Smooth And Tapered Side Making It Easy To Plug And Pull. The Rubber Material Can Be Reusable, And Long Service Life..
Risk-Free 100 Days Trail - We Offers Worry-Free 30 Day Warranty And 24 Hours Friendly Customer Service. If You Are Not Satisfied With Our Product Or Product Broken, We Provide Return, Refund Or Replacements In Accordance With Amazon's After Sales Policy..
Extensive Use - Ideal For Laboratory And Industrial Use, Can Be Used To Seal Test Tube, Flask And Other Experimental Instruments. Note: Do Not Use For Organic Solvents..
Natural Rubber - These White Lab Plugs Are Made Of Premium Natural Rubber, Not Easy To Deform, Elastic And Good Sealing. Manufactured According To Laboratory Standards..
Features
- What You Get - You will get 20 pieces of white rubber stoppers. Size: 000#; Top Dia.(big-end): 13mm/ 0.51 inch; Bottom Dia.(small-end): 8mm/ 0.31inch; Body Height: 17mm/ 0.67inch.
- Natural Rubber - These white lab plugs are made of premium natural rubber, not easy to deform, elastic and good sealing. Manufactured according to laboratory standards.
- Tapered Design - Smooth and tapered side making it easy to plug and pull. The rubber material can be reusable, and long service life.
- Extensive Use - Ideal for laboratory and industrial use, can be used to seal test tube, flask and other experimental instruments. Note: Do not use for organic solvents.
- Risk-Free 100 Days Trail - We offers worry-free 30 day warranty and 24 hours friendly customer service. If you are not satisfied with our product or product broken, we provide return, refund or replacements in accordance with Amazon's after sales policy.
- See more on Amazon...
Brand: Zorfeter | Manufacturer: Zorfeter
See On Amazon #8
uxcell 5 Pcs 1.1mm Mini Micro Twist Drill Bits, High-Speed Steel Straight Shank Extra Long Drill Bit 100mm for Aluminum Alloy
Asin: B09YR18HCB | Model: a22022400ux0879 | PartNumber: a22022400ux0879
Extended Drill：The Jobber Extended Drill Is Suitable For A Wide Range Of Applications, Allowing You To Access Hard-To-Reach Areas Where Ordinary Drills Cannot. High Hardness, Sharp Twist Drill Bits Will Make Drilling Easier And More Efficient..
Notice: Please Keep It Cool And Gentle When Using It, The Correct Use Can Greatly Extend The Life Of The Twist Drill..
Twisted Design: Split Point Tip And Twist Design Increases Cutting Speed While Easily Self-Centering To Prevent Movement. The Twisted Design Of The Drill Bit Quickly Removes Drilled Chips, Then Leaving A Smooth Hole..
High Speed Steel: Made Of High-Speed Steel, With High Hardness, Heat Resistance, Wear Resistance, Durability And Long Service Life..
Features
- Specification: Drill Bit Diameter: 1.1mm / 0.04-inch, Flute Length: 100mm / 3.94-inch, Shank Diameter: 1.1mm / 0.04-inch, Total Length: 100mm / 3.94-inch; 5 x Mini Drill Bits
- High Speed Steel: Made of high-speed steel, with high hardness, heat resistance, wear resistance, durability and long service life.
- Extended Drill The jobber extended drill is suitable for a wide range of applications, allowing you to access hard-to-reach areas where ordinary drills cannot. High hardness, sharp twist drill bits will make drilling easier and more efficient.
- Twisted Design: Split point tip and twist design increases cutting speed while easily self-centering to prevent movement. The twisted design of the drill bit quickly removes drilled chips, then leaving a smooth hole.
- Notice: Please keep it cool and gentle when using it, the correct use can greatly extend the life of the twist drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell 10pcs Prewired 0402 Warm White Surface Mounted Devices LED Light Emitting Diode - DC 2.8-3V Micro Soldered Mini LED Light
Asin: B07VYWHHHJ | Model: a19052800ux0510 | PartNumber: a19052800ux0510
【Features】- Ultra Bright Lighting, Low Energy Consumption And Low Heat And 20Cm Long Pre Wired Led To Meet Daily Basic Needs..
【Best Choice 】- Many Model Builders And Hobbyists Often Wish If There Were A Smaller Led They Could Wire Into Their Models For Lighting Effects..
【Advantage】- This Pre-Wired Led Is Super Small With Resin Cover To Protect, With 20Cm Wired, Super Strong Leds And Wire,The Wire Is Bendable, It Easy To Fix Any Shape As You Like..
【Unleash Your Creativity】- Applications & Installations: Suitable Used In Any Small Model, Cosplay, Small Model Building, Diy Manual Model Decoration..
Features
- Specification - Package Includes: 10pcs x Pre Wired Surface Mounted Devices LED; Forward Voltage: DC 2.8-3V; Forward Current: 20mA.
- Unleash Your Creativity - Applications & Installations: Suitable used in any small model, cosplay, small model building, DIY manual model decoration.
- Features - Ultra bright lighting, low energy consumption and low heat and 20cm long pre wired led to meet daily basic needs.
- Advantage - This pre-wired LED is Super small with resin cover to protect, with 20cm wired, Super strong LEDs and wire,The wire is bendable, it easy to fix any shape as you like.
- BEST CHOICE - Many model builders and hobbyists often wish if there were a smaller LED they could wire into their models for lighting effects.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell Silicone O-Ring, 14mm Outside Diameter, 10mm Inner Diameter, 2mm Width, VMQ Seal Rings Sealing Gasket Red, 50PCS
Asin: B07CVHXB7X | Model: a18032900ux0242 | PartNumber: a18032900ux0242
Hardness - Durometer(Shore Hardness) Of 55 For Resistance To Penetration..
Applications - Silicone O-Ring Used Widely For Mechanical Sealing, Pressure Vessel, Gas Compressor, Reaction Vessel, Heat Exchanger, Boiler, Filter, Automobile, Electrical Appliance And Other Fields..
Features - Silicone O-Rings Round In Cross-Section To Provide A Seal Between Cylindrical Overlapping Surfaces..
Temperature - Silicone O-Rings Can Be Used Across A Wide Temperature Range From -65 Degrees F (-54 Degrees C) To 450 Degrees F (232 Degrees C)..
Features
- Size-Outside Diameter: 14mm / 0.55"; Inner Diameter: 10mm / 0.39";Cross-Section Diameter: 2mm / 0.08"
- Temperature - Silicone O-rings can be used across a wide temperature range from -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C).
- Hardness - Durometer(Shore Hardness) of 55 for resistance to penetration.
- Features - Silicone O-rings round in cross-section to provide a seal between cylindrical overlapping surfaces.
- Applications - Silicone O-ring used widely for mechanical sealing, pressure vessel, gas compressor, reaction vessel, heat exchanger, boiler, filter, automobile, electrical appliance and other fields.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 2.36 x 2.36 inches
See On Amazon #11
Accusize Industrial Tools 1-13 mm by 0.5 mm High-Speed Steel Chucking Reamer Set in a Fitted Case, Set of 25 Pieces, 5500-SB00
Asin: B00HRD3AAK | Model: 5500-SB00 | PartNumber: 5500-SB00 | Ean: 0641799805430, 0663566007724 | UPC: 663566007724, 641799805430
Diameter Tolerance Is +0.0001" To +0.0005" - 0.0000".
Set Of 25 Pieces.
Includes A Wooden Fitted Case.
Range Is 1 To 13 Millimeters By 0.5 Millimeter.
Features
- HSS chucking reamer set; Straight shank; Straight flute, right-hand cut
- Range is 1 to 13 millimeters by 0.5 millimeter
- Diameter tolerance is +0.0001 to +0.0005 - 0.0000
- Includes a wooden fitted case
- Set of 25 pieces
- See more on Amazon...
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 12.20 x 3.54 x 9.45 inches | Weight: 2.30 Kilograms
See On Amazon #12
uxcell 5 Pcs 1mm Mini Micro Twist Drill Bits, High-Speed Steel Straight Shank Extra Long Drill Bit 60mm for Aluminum Alloy
Asin: B09YH7RRVZ | Model: a22022400ux0834 | PartNumber: a22022400ux0834
Extended Drill：The Jobber Extended Drill Is Suitable For A Wide Range Of Applications, Allowing You To Access Hard-To-Reach Areas Where Ordinary Drills Cannot. High Hardness, Sharp Twist Drill Bits Will Make Drilling Easier And More Efficient..
Notice: Please Keep It Cool And Gentle When Using It, The Correct Use Can Greatly Extend The Life Of The Twist Drill..
Twisted Design: Split Point Tip And Twist Design Increases Cutting Speed While Easily Self-Centering To Prevent Movement. The Twisted Design Of The Drill Bit Quickly Removes Drilled Chips, Then Leaving A Smooth Hole..
High Speed Steel: Made Of High-Speed Steel, With High Hardness, Heat Resistance, Wear Resistance, Durability And Long Service Life..
Features
- Specification: Drill Bit Diameter: 1mm / 0.04-inch, Flute Length: 35mm / 1.38-inch, Shank Diameter: 1mm / 0.04-inch, Total Length: 60mm / 2.36-inch; 5 x Mini Drill Bits
- High Speed Steel: Made of high-speed steel, with high hardness, heat resistance, wear resistance, durability and long service life.
- Extended Drill The jobber extended drill is suitable for a wide range of applications, allowing you to access hard-to-reach areas where ordinary drills cannot. High hardness, sharp twist drill bits will make drilling easier and more efficient.
- Twisted Design: Split point tip and twist design increases cutting speed while easily self-centering to prevent movement. The twisted design of the drill bit quickly removes drilled chips, then leaving a smooth hole.
- Notice: Please keep it cool and gentle when using it, the correct use can greatly extend the life of the twist drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell Stainless Steel C-Clamp with 20mm Wide Jaw Opening for Woodworking Welding Building Household Mount 2 Pcs
Asin: B0B1VM28P8 | Model: a22030500ux0035 | PartNumber: a22030500ux0035
Easy Installation - With Adjustable Positioning Screws, The Screws Can Be Adjusted As Needed, Which Is Simple And Convenient To Use..
Widely Used - For General Clamping Needs, For Assembly, Fastening, Bonding And Welding In Metalworking, Designed For Woodworker, Welder, And Construction Worker..
Design - I-Beam Frame Provides Strength; Special Clamping Pads That Apply Pressure Evenly And Prevent Damage When Turning The Screw..
Durable To Use - Made Of Stainless Steel, Corrosion-Resistant, Rust-Resistant, U Clamps Is 0.18 Inches Thick, Strong And Not Easy To Break..
Features
- Clamping Range - 0 ~ 14mm (0" ~ 0.55").
- Durable to Use - Made of stainless steel, corrosion-resistant, rust-resistant, U clamps is 0.18 inches thick, strong and not easy to break.
- Easy installation - With adjustable positioning screws, the screws can be adjusted as needed, which is simple and convenient to use.
- Design - I-beam frame provides strength; Special clamping pads that apply pressure evenly and prevent damage when turning the screw.
- Widely Used - For general clamping needs, for assembly, fastening, bonding and welding in metalworking, designed for woodworker, welder, and construction worker.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell 20 Pcs 0.8mm 1mm Diamond Twist Drill Bits High Speed Steel for Glass Sea Shells Stone Tiles
Asin: B0B3RZWHN9
[Applicable Machine] - Widely Used In Rotary Tool Such As Bench Drill And Hanging Mill..
[Notice] - When Drilling, It Is Necessary To Add Cutting Fluid In Time To Lubricate And Cool Down, Which Can Get A Better Drilling Hole Wall, Extends The Service Life And Drilling Accuracy..
[Application] - Suitable For Drilling Small Holes On Glass, Metal, Sea Shells, Jade, Pearls, Marble, Stones, Drywall And Son On. Due To The Different Hardness Of The Material, The Effect Is Also Different..
[Material] - Diamond Coated High Speed Steel(Hss) Is Made By Spiral Technology, Has Both Toughness And Hardness, Is Not Easy To Break. The Drill Bit Is Sharp, And Is Easy For Chip Removal..
Features
- [Specifications] - Drill Bit Dia.: 0.8mm / 0.031-inch, 1mm / 0.04-inch; Drill Bit Length: 11mm / 0.43-inch; Shank Dia.: 0.6mm / 0.024-inch, 0.7mm / 0.027-inch; Total Length: 25mm / 1-inch, 28mm / 1.1-inch; 10 x 0.8mm Diamond Twist Drill Bits; 10 x 1mm Diamond Twist Drill Bits
- [Material] - Diamond coated high speed steel(HSS) is made by spiral technology, has both toughness and hardness, is not easy to break. The drill bit is sharp, and is easy for chip removal.
- [Applicable Machine] - Widely used in rotary tool such as bench drill and hanging mill.
- [Application] - Suitable for drilling small holes on glass, metal, sea shells, jade, pearls, marble, stones, drywall and son on. Due to the different hardness of the material, the effect is also different.
- [Notice] - When drilling, it is necessary to add cutting fluid in time to lubricate and cool down, which can get a better drilling hole wall, extends the service life and drilling accuracy.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell 25pcs 5mm Nylon Solid Plastic Bearing Balls G1 Precision
Asin: B0B5XKNBRN | Model: a21031100ux0089 | PartNumber: a21031100ux0089 | Ean: 4894878072438
Features - Pa66 Is Commonly Used For Applications That Require High Strength, Hardness, And Rigidity. It Has Good Electrical And Dielectric Properties..
Notice - Confirm The Ball Diameter Before Ordering..
Applications - Nylon Bearing Balls Are Especially Useful For Low Load Bearings, Special Valves, Check Valves, Fluid Level Indicators, Carburetors, Flow Meters, Laboratory Devices..
Material - Made Of Pa66 Nylon, With Greater Wear Resistance And High-Temp Resistance Than Pom..
Features
- Size - 5mm Diameter. The package includes 25 pieces of balls
- Material - Made of PA66 nylon, with greater wear resistance and high-temp resistance than POM.
- Features - PA66 is commonly used for applications that require high strength, hardness, and rigidity. It has good electrical and dielectric properties.
- Applications - Nylon bearing balls are especially useful for low load bearings, special valves, check valves, fluid level indicators, carburetors, flow meters, laboratory devices.
- Notice - Confirm the Ball Diameter before ordering.
- See more on Amazon...
Brand: uxcell | Manufacturer: uknown
See On Amazon #16
uxcell 50PCS 1.95mm Seal O-Ring Rubber Replacement, Watches Gaskets O-Ring Tiny Assortment Crown-O-Ring, for Waterproof Seal
Asin: B09XB4K64G | Model: a22011800ux0056 | PartNumber: a22011800ux0056
Crown-O-Ring: The Gasket Can Be Stretched By A Few Millimeters And Also Works For Watches Crown With Shapes Other Than Round..
Notice: Please Pay Attention To The Size Before Buying..
Waterproof: Soft And Flexible O-Ring, Easy To Install, Used To Keep The Watch Waterproof Resistant..
Material: The O-Ring Is Made Of Good Quality Rubber Material, Which Is Flexible, High Elasticity, Reliable In Use, Wear-Resistant And Durable..
Features
- Specifications: Color: Black; Size: 1.95 x 0.95mm / 0.08 x 0.04-inch(OD*ID); 50 Pcs Watch Crown-O-Ring
- Material: The O-ring is made of good quality rubber material, which is flexible, high elasticity, reliable in use, wear-resistant and durable.
- Crown-O-Ring: The gasket can be stretched by a few millimeters and also works for watches Crown with shapes other than round.
- Waterproof: Soft and flexible O-ring, easy to install, used to keep the watch waterproof resistant.
- Notice: Please pay attention to the size before buying.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell 5 Pcs 110mm Length 1mm Pitch 18 Pin AWM 80C 60V Flexible Flat Cable FFC FPC
Asin: B0190019K0 | Model: a15110200ux0311 | PartNumber: a15110200ux0311 | Ean: 0712662657835 | UPC: 712662657835
Pin Number : 18;Pin Size : 4Mm X 1Mm(0.16" X 0.04")(L*W);Length : 110Mm(4.3").
Weight : 5G;Package Content : 5 Pcs X Flexible Flat Cable.
Insert Thickness : 0.3Mm(0.01");Total Size : 110Mm X 19Mm(4.3" X 0.75")(L*W);Main Color : White, Blue.
Heat Resistance : 80C(176F);Dielectric Strength : 60V;Pitch : 1Mm.
Features
- Product Name : Flexible Flat Cable;Material : Copper, PVC;Model : AWM 20624 80C 60V VW-1
- Heat Resistance : 80C(176F);Dielectric Strength : 60V;Pitch : 1mm
- Pin Number : 18;Pin Size : 4mm x 1mm(0.16 x 0.04)(L*W);Length : 110mm(4.3)
- Insert Thickness : 0.3mm(0.01);Total Size : 110mm x 19mm(4.3 x 0.75)(L*W);Main Color : White, Blue
- Weight : 5g;Package Content : 5 Pcs x Flexible Flat Cable
- See more on Amazon...
Brand: uxcell | Manufacturer: Uxcell
Dimensions: 0.01 x 4.33 x 0.75 inches | Weight: 0.01 Pounds
See On Amazon #18
uxcell 5pcs 2 Position 7P 1P2T SMT Surface Mounted Devices Self Locking Mini Power Slide Switch 7x2x1mm
Asin: B01N24MSKT | Model: SYNCTEA003186 | PartNumber: SYNCTEA003186 | Ean: 0604267116346 | UPC: 604267116346
Action Type: Latching; Main Body Size: 7 X 2 X 1Mm/0.28"X0.08"X0.04"(L*W*H); Terminal Quantity: 7.
Withstand Voltage: Ac 500V For 1 Min; Handle Length: 1Mm/0.04".
Contactresistance: 30M Ohm Max.; Insulationresistance: 100M Ohm At 500V Dc.
Package Content: 5 Pcs X Slide Switch; Main Color: Black, Silver Tone; Contact Type: 1P2t.
Features
- Country of Manufacture: CHINA; Material: Plastic, Metal; Net Weight: 1g
- Package Content: 5 Pcs x Slide Switch; Main Color: Black, Silver Tone; Contact Type: 1P2T
- Action Type: Latching; Main Body Size: 7 x 2 x 1mm/0.28x0.08x0.04(L*W*H); Terminal Quantity: 7
- ContactResistance: 30m ohm max.; InsulationResistance: 100m ohm at 500V DC
- Withstand Voltage: AC 500V for 1 min; Handle Length: 1mm/0.04
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 1.97 x 1.18 inches
See On Amazon #19
uxcell 31pcs Pin Vise Drill Bit Set, 0.3mm-1.2mm PCB Drill Bits 10pcs, 0.8mm-3.0mm Mini Twist Drill Bits 20pcs, Precision Pin Vise Hand Tools, for Metal Wood Plastic PCB DIY Making
Asin: B0B4WBF14W
Precise Pin Vise: Made Of Aluminum Alloy, The Pin Vise Hand Drill Is Durable And Firm. Vise Head Can Be Easily Adjustable To Clamp Different Drill Bits Sizes. Pen Style Design, Compact Size, And Light Weight..
Package: 10Pcs X Pcb Drill Bits (1Pcs Of Each Size), 10Pcs X 4341 High Speed Steel Twist Drill Bits (1Pcs Of Each Size), 10Pcs X 4241 High Speed Steel Twist Drill Bits (2Pcs Of Each Size), 1Pcs X Pin Vise. Tips: The Drill Bits Are Too Tiny, So Please Be Careful..
Wide Applications: 3-Claw Hardened Steel Chuck Can Firmly Hold Micro Drill Bits. Widely Used For Drilling Precise Holes On Wood, Plastic, Walnut, Amber, Beads, Beeswax, Olive Nut, Small Model Kit And Other Diy Projects. Tips: The Pin Vise Is A Manual Tool Instead Of A Power Tool..
Twist Drill Bits: 10 Different Sizes Of 4341 High-Speed Steel Bits: 0.8Mm, 1.0Mm, 1.2Mm, 1.5Mm, 1.8Mm, 2.0Mm, 2.2Mm, 2.5Mm, 2.8Mm, 3.0Mm. 5 Different Sizes Of 4241 High-Speed Steel Bits: 0.8Mm, 0.9Mm, 1.0Mm, 1.1Mm, 1.2Mm. High Hardness And Toughness, Wear Resistance, Hardened Up To 63-65Hrc..
Features
- PCB Drill Bits: 10 different sizes: 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2mm; Shank Dia.: 3.175mm / 1/8". High hardness, high wear resistance, high strength, resistance to bending. Used for precision drilling in PC boards, plastic, fiberglass, wood, soft metal.
- Twist Drill Bits: 10 different sizes of 4341 high-speed steel bits: 0.8mm, 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.2mm, 2.5mm, 2.8mm, 3.0mm. 5 different sizes of 4241 high-speed steel bits: 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2mm. High hardness and toughness, wear resistance, hardened up to 63-65HRC.
- Precise Pin Vise: Made of aluminum alloy, the pin vise hand drill is durable and firm. Vise head can be easily adjustable to clamp different drill bits sizes. Pen style design, compact size, and light weight.
- Wide Applications: 3-claw hardened steel chuck can firmly hold micro drill bits. Widely used for drilling precise holes on wood, plastic, walnut, amber, beads, beeswax, olive nut, small model kit and other DIY projects. Tips: the pin vise is a manual tool instead of a power tool.
- Package: 10pcs x PCB Drill Bits (1pcs of each size), 10pcs x 4341 High Speed Steel Twist Drill Bits (1pcs of each size), 10pcs x 4241 High Speed Steel Twist Drill Bits (2pcs of each size), 1pcs x Pin Vise. Tips: The drill bits are too tiny, so please be careful.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search