Arducam for Raspberry Pi Noir Camera Module, 8MP IMX219 RPi-CAM-V2 Night Vision for Raspberry Pi 5, 4B, 3B+, 3B, 2B, Pi Zero & W
Asin: B09YHPB3NY
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Wide Compatibility: The Pinoir Camera Is Compatible With Raspberry Pi All Series Boards, Which Can Be Easily Used With A Simple Configuration..
Easy To Setup: The Package Comes With A 15Cm 15-22Pin Fpc Cable For Pi 1-4B, And A 15Cm 22-22Pin Fpc Cable For Raspberry Pi 5, Zero And Zero 2W. Simply Connect The Pi Board And Camera With The Fpc Cable And You Can Easily Use This 8Mp High-Quality Camera..
Please Note: This Camera Module Is Only Supported With The Latest Pi Os Bullseye (Released On January 18, 2022) And Libcamera, Not With The Previous Pi Os (Legacy), Raspistill And Buster. Before You Use It, Please Follow The Instructions To Configure It..
Especially For Night Vision: The Noir Camera Does Not Have An Infrared (Noir) Filter On The Lens, Making It Ideal For Infrared Photography And Photography In Low-Light (Twilight) Environments..
8Mp More Than Hd: Supports 3280 × 2464 Pixel Still Images, As Well As 1080P47, 1640 × 1232P41 And 640 × 480P206 Video Modes, And Still Captures. Efl: 2.5Mm; F.No: 2.8; Viewing Angle: 62.2(H)..
Features
- Noir Camera for Raspberry Pi : This 8MP HD camera module is designed for Raspberry Pi with IMX219 8MP pixel sensor with a fixed focus lens. The difference from the regular V2 is that it does not have an IR filter.
- 8MP More than HD: Supports 3280 2464 pixel still images, as well as 1080p47, 1640 1232p41 and 640 480p206 video modes, and still captures. EFL: 2.5mm; F.NO: 2.8; viewing angle: 62.2(H).
- Wide Compatibility: The PiNoir camera is compatible with Raspberry Pi all series boards, which can be easily used with a simple configuration.
- Especially for Night vision: The NoIR camera does not have an infrared (NoIR) filter on the lens, making it ideal for infrared photography and photography in low-light (twilight) environments.
- Easy to Setup: The package comes with a 15cm 15-22pin FPC cable for Pi 1-4B, and a 15cm 22-22pin FPC cable for Raspberry Pi 5, Zero and Zero 2W. Simply connect the Pi board and camera with the FPC cable and you can easily use this 8MP high-quality camera.
- Please note: This camera module is only supported with the latest Pi OS Bullseye (released on January 18, 2022) and libcamera, not with the previous Pi OS (Legacy), raspistill and buster. Before you use it, please follow the instructions to configure it.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
Warranty: 6 Months
See On Amazon Similar To Arducam for Raspberry Pi Noir
#1
Arducam Day-Night Vision for Raspberry Pi Camera, Automatic IR-Cut Switching All-Day Image All-Model Support, IR LED for Low Light and Night Vision, M12 Lens Interchangeable, OV5647 5MP 1080P
Asin: B07X1VGQSL | Model: B003503 | PartNumber: B003503
Better Low Light Performance - Ir Corrected Lens To Reduce Focus Shift At Night, And Ir Led Illuminator To Improve The Lighting Condition.
Accessories - 2 Heat Sinks For Ir Led Boards And 1 Ribbon Cable For Pi Zero Included. Contact Arducam For More Lens Options, Technical Support And Customer Services.
Typical Usage Scenarios - Home Security And Surveillance, Motion Detection, Time-Lapse Photography And Other Raspberry Pi Camera Projects.
Raspberry Pi Compatible - Work On Raspicam Commands And Python Scripts. Support Raspberry Pi Zero, Pi 5, 4, 3 B+, Pi 3, Pi B/2B/B/B+/A.
Features
- Day/Night Camera - IR Cut filter switched in and out automatically. A NoIR camera that keeps videos and images from washed out or looking pink yet still offers a decent night vision
- Raspberry Pi Compatible - Work on Raspicam commands and Python scripts. Support Raspberry Pi Zero, Pi 5, 4, 3 b+, Pi 3, Pi B/2B/B/B+/A
- Better Low Light Performance - IR corrected lens to reduce focus shift at night, and IR LED illuminator to improve the lighting condition
- Typical Usage Scenarios - Home security and surveillance, motion detection, time-lapse photography and other Raspberry Pi camera projects
- Accessories - 2 heat sinks for IR LED boards and 1 ribbon cable for Pi Zero included. Contact Arducam for more lens options, technical support and customer services
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
Dimensions: 0.03 x 1.31 x 0.56 inches | Weight: 0.05 pounds
See On Amazon #2
Arducam IMX519 Autofocus Camera Module for Raspberry Pi, 16MP AF Pi Camera Compatible with Raspberry Pi 5/4B/3B+, Raspberry Pi Zero 2 W
Asin: B0B3XBQM9Z
Sharper Images/Videos: Higher Quality Than The Hq Camera..
Package Contents: The Package Includes An Imx519 Cmos Camera Board With An Autofocus Lens And A 15Cm Fpc Cable. Please Search Asin: B09tsdz48f For The Camera Extension Kit, Which Allows You To Place Cameras Up To 15 Meters Away For Shooting. For The Camera Case And Tripod Set, Please Search Asin: B09tkyxzfg. 【Technical Support】If There Is Any Issue With The Camera, Feel Free To Contact Arducam, We Will Provide Technical Support For You..
Note：This Camera Is Compatible With Jetson Developer Kit, And It Does Not Guarantee To Support Other Third-Party Boards..
V1/V2 Size: Hassle-Free Upgrades To Your Existing Projects..
Autofocus: Most Versatile Af (Manual/Continuous/Etc.) Experience On A Pi Camera..
Features
- 16 Megapixel: 2 times higher resolution than the Pi camera V2. Unlike the native Pi camera, this camera requires some simple script configuration before use and does not support raspbian.
- Autofocus: most versatile AF (Manual/Continuous/etc.) experience on a Pi camera.
- Sharper Images/videos: Higher quality than the HQ camera.
- V1/V2 Size: hassle-free upgrades to your existing projects.
- Package Contents: The package includes an IMX519 CMOS camera board with an autofocus lens and a 15cm FPC cable. Please search ASIN: B09TSDZ48F for the camera extension kit, which allows you to place cameras up to 15 meters away for shooting. For the camera case and tripod set, please search ASIN: B09TKYXZFG. Technical Support If there is any issue with the camera, feel free to contact Arducam, we will provide technical support for you.
- Note This camera is compatible with Jetson Developer Kit, and it does not guarantee to support other third-party boards.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
Warranty: 6 Months
See On Amazon #3
Arducam for Raspberry Pi Camera 16MP IMX519 Camera Module with 140 (D) Wide Angle M12 Lens for Raspberry Pi and OpenHD
Asin: B0C53BBMLG
M12 Manual Focus: Easy To Manually Adjust Focus Distance With The M12 Hd Lens, The 120° Ultra-Wide Angle Lens Captures Exceptional Detail And Clarity For Any Project..
Wide Compatible: Compatible With All Raspberry Pi Camera Boards, Including The Raspberry Pi Zero (Note: 22-22Pin Fpc Cable Is Required, Which Is Not Included In The Package.), This Camera Offers A Hassle-Free, Versatile Solution For All Your Camera Needs..
Crisper Images/Video: Captures Smooth And Clear 1080P30 And 720P60 Video, Making It Perfect For Streaming Or Recording Your Next Project..
V1/V2/V3 Size: With A Compact Size Of 25*24Mm, This Camera Is Perfect For Drones And Other Embedded Applications, Providing Excellent Versatility..
Features
- 16MP for All Pis: Based on a 16MP IMX519 image sensor with a pixel resolution of 4656 x 3496, twice as high as the v2 camera and 40% higher than the HQ camera.
- V1/V2/V3 size: With a compact size of 25*24mm, this camera is perfect for drones and other embedded applications, providing excellent versatility.
- M12 Manual Focus: Easy to manually adjust focus distance with the M12 HD lens, the 120 ultra-wide angle Lens captures exceptional detail and clarity for any project.
- Crisper Images/Video: Captures smooth and clear 1080p30 and 720p60 video, making it perfect for streaming or recording your next project.
- Wide Compatible: Compatible with all Raspberry Pi camera boards, including the Raspberry Pi Zero (Note: 22-22pin FPC cable is required, which is not included in the package.), this camera offers a hassle-free, versatile solution for all your camera needs.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #4
Arducam for Raspberry Pi Camera Module 3 Wide, 120 IMX708 Manual Focus Pi Camera V3 with M12 Lens, 15cm 15-22 Pin FFC Cable
Asin: B0BZR6XL3Y
Wide-Angle M12 Lens: The V3 Camera Is Equipped With A 120° (Hfov) Wide-Angle M12 Lens, Allowing For Deeper Depth Of Field And Capturing More Image Detail While Effectively Reducing Bokeh..
What You Will Get: This Camera Module Comes With A 15Cm 15-22Pin Raspberry Pi Camera Cable And Is Equipped With An M12 Lens For Manual Focus Applications..
Easy Use: This Arducam For Raspberry Pi 5 Camera Fully Supports Libcamera And Picamera2, And Uses Csi-2 Serial Data Output With 2-Wire Serial Communication For Seamless Integration..
Hdr Image Sensor: This Arducam For Raspberry Camera Is Based On A Back-Illuminated Stacked Cmos 12-Megapixel High-Resolution Image Sensor (Imx708), Which Can Output Up To 3 Megapixels In Hdr Mode On The Raspberry Pi. The Maximum Resolution Is 4608(H) × 2592(V)..
Features
- Wide Compatibility: Compatible with all Raspberry Pi boards, including Raspberry Pi 5, Raspberry Pi 4B, Raspberry Pi 3B, and Raspberry Pi Zero W/2 W.
- HDR Image Sensor: This Arducam for Raspberry camera is based on a back-illuminated stacked CMOS 12-megapixel high-resolution image sensor (IMX708), which can output up to 3 megapixels in HDR mode on the Raspberry Pi. The maximum resolution is 4608(H) 2592(V).
- Wide-angle M12 Lens: The V3 camera is equipped with a 120 (HFOV) wide-angle M12 lens, allowing for deeper depth of field and capturing more image detail while effectively reducing bokeh.
- Easy Use: This Arducam for Raspberry Pi 5 camera fully supports Libcamera and Picamera2, and uses CSI-2 serial data output with 2-wire serial communication for seamless integration.
- What you will get: This camera module comes with a 15cm 15-22pin Raspberry Pi camera cable and is equipped with an M12 Lens for manual focus applications.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #5
Arducam 16MP Autofocus Camera Module for Raspberry Pi with ABS Case, IMX519 16 Megapixel High Resolution Autofocus Camera for All Raspberry Pi Models
Asin: B09STL7S88
【Crisper Images/Videos】The 16 Megapixel Camera Can Capture 1080P Full Hd Video At Up To 30 Frames Per Second And 720P Hd Video At Up To 60 Frames Per Second, And Also Provides An Effective 80-Degree Field Of View..
【Package Contents】The Package Includes A Camera Board With Imx519 Sensor And An Autofocus Lens, An Fpc Cable And A Camera Housing. Please Search Asin: B09tsdz48f For The Camera Extension Kit, Which Allows You To Place Cameras Up To 15 Meters Away For Shooting. Asin: B09tsgmcm9 Is A Multi-Camera Solution That Enables 4 Cameras To Appear In The Same Frame. If There Is Any Issue With The Camera, Feel Free To Contact Arducam, We Will Provide Technical Support For You..
Note：This Camera Is Compatible With Jetson Developer Kit, And It Does Not Guarantee To Support Other Third-Party Boards..
【Camera Module V3/V2/V1 Size】The Autofocus Camera Module Has The Same Size As The Raspberry Pi Camera Module V3/V2/V1, The Package Comes With Plastic Housing, Also Suitable For V1 And V2 Boards. And The Housing Also Has An Integrated Tripod Mounting Hole, Which You Can Install On Any 1/4 Hole Distance Tripod..
【Imx519 Af Camera Moudle】Built-In Autofocus Motor Allows You To Get Focus Quickly So That You Can Focus To Infinity No Matter Where You Place Your Camera. The Minimum Focus Distance Is 10Cm, And The Longest Allowed Exposure Time Is 200 Seconds..
Features
- 16MP for All Pis The Arducam designed for Raspberry Pi camera features a 16MP IMX519 sensor with a pixel resolution of 4656 x 3496, twice as high as the v2 camera and 40% higher than the HQ camera; Compatible with any Raspberry Pi board with a MIPI/CSI interface; Unlike the native Pi camera, this camera requires some simple script configuration before use, and does not support raspbian.
- IMX519 AF Camera Moudle Built-in autofocus motor allows you to get focus quickly so that you can focus to infinity no matter where you place your camera. The minimum focus distance is 10cm, and the longest allowed exposure time is 200 seconds.
- Crisper Images/Videos The 16 megapixel camera can capture 1080p Full HD video at up to 30 frames per second and 720p HD video at up to 60 frames per second, and also provides an effective 80-degree field of view.
- Camera Module V3/V2/V1 Size The autofocus camera module has the same size as the raspberry pi camera module V3/V2/V1, the package comes with plastic housing, also suitable for V1 and V2 boards. And the housing also has an integrated tripod mounting hole, which you can install on any 1/4 hole distance tripod.
- Package Contents The package includes a camera board with IMX519 sensor and an autofocus lens, an FPC cable and a camera housing. Please search ASIN: B09TSDZ48F for the camera extension kit, which allows you to place cameras up to 15 meters away for shooting. ASIN: B09TSGMCM9 is a multi-camera solution that enables 4 cameras to appear in the same frame. If there is any issue with the camera, feel free to contact Arducam, we will provide technical support for you.
- Note This camera is compatible with Jetson Developer Kit, and it does not guarantee to support other third-party boards.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
Warranty: 6 Months
See On Amazon #6
Arducam Lens Board OV5647 Sensor for Raspberry Pi Camera, Adjustable and Interchangeable Lens M12 Module, Focus and Angle Enhancement for Raspberry Pi 5/4/3/3 B+
Asin: B013JTY8WY | Model: B0031 | PartNumber: B0031 | Ean: 0714119484438 | UPC: 714119484438
Example Projects - Shoot A Waterdrop Half An Inch Away With Tuned Focus; Shoot A Qr Code Or A4 Paper From The Other End Of The Room With Telephoto M12 Lens; Stitch A Panorama With Fisheye M12 Lens.
Note - 1. This Board Is Slightly Larger(36Cm) Than The Official Pi Camera V2 So It Does Not Fit Some Cases For Raspberry Pi, But It’S Natively Compatible With The Commands And Scripts; 2. It Works With Pi Zero, But You Will Need To Buy An Extra Cable. 3. Be Gentle While Changing The Lens And Holders Or You Might Damage The Thread, But It’S Easily Fixable With A New M12 Holder.
Options - Get M12 Lens Set “Arducam Lk001” For Optical Testing And “Arducam Lk002” For Minimum Distortion In Machine Vision; Get “Arducam B0055” For M12 Fisheye And “Arducam B003503” For M12 Night Vision. Get A Lens Without Ir Filter To Make This Camera Ir Sensitive. Contact Arducam For Other Options.
Compose The Perfect Frame - You Decide How To Frame Up The Best Image By Picking An M12 Lens With The Best Fov (Field Of View) You Need With A Variety Of M12 Lenses On The Market To Choose From.
Features
- Focus the sharpest way - From less than an inch to infinity, you get easy focus control on a 5MP Arducam for Raspberry Pi camera simply by spinning and tuning the lens and the locking ring. Check B07SN8GYGD for software autofocus/manual focus
- Compose the perfect frame - You decide how to frame up the best image by picking an m12 lens with the best FoV (Field of View) you need with a variety of M12 lenses on the market to choose from
- Example projects - Shoot a waterdrop half an inch away with tuned focus; Shoot a QR code or A4 paper from the other end of the room with telephoto M12 lens; Stitch a panorama with fisheye m12 lens
- Options - Get M12 lens set Arducam LK001 for optical testing and Arducam LK002 for minimum distortion in machine vision; Get Arducam B0055 for m12 fisheye and Arducam B003503 for m12 night vision. Get a lens without IR filter to make this camera IR sensitive. Contact Arducam for other options
- Note - 1. This board is slightly larger(36cm) than the official Pi Camera V2 so it does not fit some cases for Raspberry Pi, but it s natively compatible with the commands and scripts; 2. It works with Pi Zero, but you will need to buy an extra cable. 3. Be gentle while changing the lens and holders or you might damage the thread, but it s easily fixable with a new m12 holder
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #7
Arducam CSI to USB UVC Camera Adapter Board for Raspberry Pi HQ Camera, 12.3MP IMX477 Camera Board
Asin: B08NVG2CY4 | Model: B0278 | PartNumber: B0278
Ultra Hd And High Frame Rates: It Has No Effect On The Image Quality And Frame Rates At All; Max. Still Resolution 4056(H) X 3040(V); Mjpg 10Fps@4056X3040, 20Fps@4K(3840X2160), 30Fps@2592X1944/2560X1440, 60Fps@1080P, 100Fps@720P..
Application: This Adapter Can Work With 12.3Mp Raspberry Pi Official High Quality Camera, Highly Recommended For A Home Video Surveillance System, Monitoring 3D Printer, And Other Vision Applications Demand Imx477 Camera..
Easy To Assemble: Board Dimension Is 38Mmx38mm, Same Sized With Imx477 Hq Camera Board, And Compatible Location And Pitch Of Mounting Hole, Just Connect And Assemble The Adapter Board With The Camera Board, With The Included Camera Cable And Accessories..
With Audio: This Adapter Makes Your Imx477 Camera Board No Longer Be Silent Because Of The Built-In Single Microphone, So As To Capture Video With Audio..
Features
- Make IMX477 UVC-Compliant: This CSI to USB adapter board can extend your 12.3MP IMX477 High Quality Camera work as a webcam, just connect this adapter with camera board to PC computer, laptop, Android device, Raspberry Pi or Jetsons via USB port without extra drivers to be installed.
- With Audio: This adapter makes your IMX477 camera board no longer be silent because of the built-in single microphone, so as to capture video with audio.
- Ultra HD and High Frame Rates: It has no effect on the image quality and frame rates at all; max. still resolution 4056(H) x 3040(V); MJPG 10fps@4056x3040, 20fps@4K(3840x2160), 30fps@2592x1944/2560x1440, 60fps@1080P, 100fps@720P.
- Easy to Assemble: Board dimension is 38mmx38mm, same sized with IMX477 HQ camera board, and compatible location and pitch of mounting hole, just connect and assemble the adapter board with the camera board, with the included camera cable and accessories.
- Application: This adapter can work with 12.3MP Raspberry Pi Official High Quality Camera, highly recommended for a home video surveillance system, monitoring 3D Printer, and other vision applications demand IMX477 camera.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
Weight: 0.13 Pounds
See On Amazon #8
Arducam 64MP Ultra High-Resolution Autofocus Camera Module for Raspberry Pi, Compatible with Raspberry Pi 5/4B/3B+/3B/2B/A+/Zero/W/Zero WH
Asin: B0B63PCZM9
【Autofocus And Manual Focus】Up To 10X Digital Zoom With Built-In Autofocus Motor For Fast And Infinite Focus No Matter Where You Place The Camera. Manual Focus Can Also Be Controlled Through Software..
【Widely Used With Other Devices】You Can Let Your Camera Pan And Tilt With A Pan-Tilt Platform (Asin: B08pk9n9t4); You Can Achieve Remote Shooting Control With The Camera Extension Cable(Asin: B09tsdz48f); You Can Fix It On A Tripod(Asin: B09tkyxzfg.) As The Image Shown..
【Technical Support】If There Is Any Issue With The Camera, Feel Free To Contact Arducam, We Will Provide Technical Support For You..
【Easily Accessible】Provides A Pre-Compiled Program (Not Open Source), Even For Newbies Who Use Raspberry Pi For The First Time, You Can Easily Access The Camera. Plug & Play. For 64Mp Cameras With Abs Cases, Please Search For B0bl987t5y.
【All Raspberry Pi Compatible】Same Size As Raspberry Pi Camera Module 3/V2/V1, Mipi Csi-2 Interface, Compatible With All Raspberry Pi Motherboards With Libcamera App(Bullseye Only)..
Features
- 64MP Ultra HD Arducam for Raspberry Pi Camera With the 64MP ultra-high resolution camera, your Raspberry Pi can capture still images with amazing resolution (9152 x 6944) just like a flagship phone.
- All Raspberry Pi Compatible Same size as Raspberry Pi Camera Module 3/V2/V1, MIPI CSI-2 interface, compatible with all Raspberry Pi motherboards with libcamera app(Bullseye Only).
- Autofocus and Manual Focus Up to 10x digital zoom with built-in autofocus motor for fast and infinite focus no matter where you place the camera. Manual focus can also be controlled through software.
- Easily accessible Provides a pre-compiled program (not open source), even for newbies who use Raspberry Pi for the first time, you can easily access the camera. Plug & play. For 64mp cameras with ABS cases, please search for B0BL987T5Y
- Widely used with other devices You can let your camera pan and tilt with a Pan-Tilt Platform (ASIN: B08PK9N9T4); you can achieve remote shooting control with the camera extension cable(ASIN: B09TSDZ48F); You can fix it on a tripod(ASIN: B09TKYXZFG.) as the image shown.
- Technical Support If there is any issue with the camera, feel free to contact Arducam, we will provide technical support for you.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
Warranty: 6 months
See On Amazon #9
Arducam Mega for Arduino Camera Module, 5MP Autofocus SPI Camera, Compatible with Any MCU Camera, Arduino UNO Mega2560 Board, Raspberry Pi
Asin: B0BW7MDVHK
Multiplexing: This Spi Camera Module Can Support Up To 4 Cameras Running On A Single Mcu By Using An Adapter Board. They Capture At The Same Time With Sequential Readout Then..
One Fits All: This 5Mp Autofocus Camera Fits Any Microcontroller With A Single Standard Spi Interface (Either Native Or Mimic). 8-Bit, 16-Bit Or 32-Bit, Arm, Risc-V, Or Others. Arduino, Stm8/Stm32, Esp8266/Esp32, Msp430, Nordic, Renesas, And Countless More..
Open Source Sdk: The Sdk Is Fully Open-Source With Mit License. A Lean Architecture With A Hardware Abstraction Layer, Enabling You To Add A New Mcu Without Effort..
Programmable Autofocus: This Arduino Uno Camera Is Equipped With An Autofocus Lens Which Can Achieve Autofocus At Different Distances. Suitable For The Iot Activities..
Features
- Easy Using: This Arduino camera shield is extremely easy to use. High-level commands were built in so you manipulate the camera through API access like using a DSLR camera via button clicks.
- Programmable Autofocus: This Arduino uno camera is equipped with an Autofocus Lens which can achieve autofocus at different distances. Suitable for the IoT activities.
- Multiplexing: This SPI camera module can support up to 4 cameras running on a single MCU by using an adapter board. They capture at the same time with sequential readout then.
- Open Source SDK: The SDK is fully open-source with MIT license. A lean architecture with a hardware abstraction layer, enabling you to add a new MCU without effort.
- One Fits All: This 5MP autofocus camera fits any microcontroller with a single standard SPI interface (either native or mimic). 8-bit, 16-bit or 32-bit, ARM, RISC-V, or others. Arduino, STM8/STM32, ESP8266/ESP32, MSP430, Nordic, Renesas, and countless more.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #10
M12 Lens Set, Arducam Lens for Raspberry Pi Camera (1/4") and Arduino, Telephoto, Macro, Wide Angle, Fisheye Lens Kit (10 - 200 ) with M12 Lens Holder and Cleaning Cloth, Optical All-in-One
Asin: B07L92S9MT | Model: 3216551480 | PartNumber: 3216551480
What Else Is Needed: It Makes A Perfect Combo With “Arducam B0031”, A More Flexible And Slightly Larger Camera Module For Raspberry Pi That Uses M12 Lenses To Frame Up The Best Image. You Can’T Use This Kit Directly With The Official Raspberry Pi Camera Module V2 Because An M12 Holder Or 18/20Mm Hole Spacing Of The Camera Board Is Required.
Note: The 4 Lens Holders Included Come With 18Mm/20Mm Hole Spacing And 7Mm/13Mm Heights. Typically Lenses With A Larger Field Of View Will Require Shorter Holders, And That Means You Need To Change The Lens Holder If The Lens Does Not Focus At All. Arducam Cs Mount Cameras Also Work With This Kit With Holders Replaced.
What’S In It: This Kit Includes 10 M12 Lenses To Cover Almost Any Angles Of View You’Ll Ever Need, 10°/20°/40°/60°/80°/100°/120°/140°/160°/200° Respectively On A 1/4” Pi Camera Like Ov5647 And Imx219. M12 Lens Holders, Screws, Specifications And Even Cleaning Cloth Are Also In The Box.
Features
- Why we need it: In case you re disappointed with the fixed official cameras and want precise control of what gets into the frame of your image like how wide and how close it is - we selected, tested and labeled a bunch of lenses and shrinks it all into a complete toolbox on your palm
- What s in it: This kit includes 10 M12 Lenses to cover almost any angles of view you ll ever need, 10 /20 /40 /60 /80 /100 /120 /140 /160 /200 respectively on a 1/4 Pi Camera like OV5647 and IMX219. M12 lens holders, screws, specifications and even cleaning cloth are also in the box
- What else is needed: It makes a perfect combo with Arducam B0031 , a more flexible and slightly larger camera module for Raspberry Pi that uses M12 lenses to frame up the best image. You can t use this kit directly with the official Raspberry Pi Camera Module V2 because an M12 holder or 18/20mm hole spacing of the camera board is required
- NOTE: The 4 lens holders included come with 18mm/20mm hole spacing and 7mm/13mm heights. Typically lenses with a larger Field of View will require shorter holders, and that means you need to change the lens holder if the lens does not focus at all. Arducam CS Mount Cameras also work with this kit with holders replaced
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #11
Arducam for Raspberry Pi HQ Camera Module,12.3MP IMX477 Raspberry Pi Camera for Raspberry Pi5/4B/3B+/Zero 2W, Comes with C-CS Adapter and Tripod Mount
Asin: B0D3WYQF2Q
What You Will Get: 1 X Pi Hq Camera(With A 1/4" Tripod Adapter), 1 X Dust Cover, 1 X C-Cs Adapter, 1 X 15-22Pin Pi Camera Cable, 1 X 22-22Pin Pi Camera Cable;.
Wide Application: This Rpi Camera Can Be Used As A 3D Printer Camera, Or Home Security Monitor And Can Serve For Artificial Intelligence, Like Facial Recognition, High-Speed Capturing, And So On..
High Resolution: This Camera Module Can Offer High-Resolution Images With Its 12.3Mp Imx477 Sensor, The Max Resolution Is 4056*3040 Pixels..
For All Raspberry Pi: This Arducam For Raspberry Pi Camera Is Compatible With All Raspberry Pi;.
Features
- How to use: Before using this hq camera, please modify the config.txt file by adding dtoverlay=IMX477 (If connect to cam0 port on Pi5, add dtoverlay=IMX477,cam0);
- For all Raspberry Pi: This Arducam for Raspberry Pi camera is compatible with all Raspberry Pi;
- What you will get: 1 x Pi hq camera(with a 1/4 tripod adapter), 1 x dust cover, 1 x C-CS adapter, 1 x 15-22pin Pi camera cable, 1 x 22-22pin Pi camera cable;
- High resolution: This camera module can offer high-resolution images with its 12.3MP IMX477 sensor, the max resolution is 4056*3040 pixels.
- Wide Application: This RPI camera can be used as a 3D printer camera, or home security monitor and can serve for Artificial Intelligence, like facial recognition, high-speed capturing, and so on.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
Warranty: 6 months
See On Amazon #12
Arducam 8MP IMX219 175 Degree Ultra Wide Angle for Raspberry Pi Camera Module, Compatible with Raspberry Pi 5, 4 Model B, Pi 3/3B+, and Pi Zero 2W
Asin: B09VSVB4DT
Wide Compatibility: The Camera Is Not Only Compatible With All Models Of Raspberry Pi 1, 2, 3 , 4, And 5, But Also With Raspberry Pi Zero And Zero 2W, Which Can Be Easily Used With A Simple Configuration. Please Note: This Camera Module Is Only Supported With The Latest Rpi Os Bullseye (Released On January 18, 2022) And Libcamera, Not With The Legacy Os..
Application: Easy To Use For Beginners, And For Advanced Gamers, It Offers More To Explore. Perfect For Time-Lapse, Slow Motion, Home Security Applications, Monitoring Octoprint 3D Printer, And Wildlife Camera Trap Applications..
Easy To Setup: The Package Comes With 2 Fpc Cables. Simply Connect The Pi Board And Camera With The Fpc Cable And You Can Easily Use This 8Mp High-Quality Camera..
8Mp More Than Hd: Supports 3280 × 2464 Pixel Still Images, As Well As 1080P47, 1640 × 1232P41 And 640 × 480P206 Video Modes, And Still Captures. The Camera Board V2 - 8 Megapixels Is A Leap Forward In Image Quality, Color Fidelity, And Low Light Over The Camera V1..
Features
- Arducam for Raspberry Pi Camera: Designed for Raspberry Pi, this 8MP HD camera module has IMX219 8MP pixel sensor with a wide-angle M12 lens. EFL: 1.3mm; F.NO: 2.0; View Angle: 175(D) x 155(H) x 115(V).
- 8MP More than HD: Supports 3280 2464 pixel still images, as well as 1080p47, 1640 1232p41 and 640 480p206 video modes, and still captures. The Camera Board v2 - 8 Megapixels is a leap forward in image quality, color fidelity, and low light over the camera v1.
- Wide Compatibility: The camera is not only compatible with all models of Raspberry Pi 1, 2, 3 , 4, and 5, but also with Raspberry Pi Zero and Zero 2W, which can be easily used with a simple configuration. Please note: This camera module is only supported with the latest RPi OS Bullseye (released on January 18, 2022) and libcamera, not with the legacy OS.
- Easy to Setup: The package comes with 2 FPC cables. Simply connect the Pi board and camera with the FPC cable and you can easily use this 8MP high-quality camera.
- Application: Easy to use for beginners, and for advanced gamers, it offers more to explore. Perfect for time-lapse, slow motion, home security applications, monitoring Octoprint 3D Printer, and wildlife camera trap applications.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
Warranty: 6 Months
See On Amazon #13
Arducam for Raspberry Pi 5 Camera Module with Interchangeable CS Mount Lens for Pi 5, 4, 3, 3B+, 5MP OV5647 1080P
Asin: B012ETE75I | Model: B0032 | PartNumber: B0032 | Ean: 0714119484414 | UPC: 714119484414
Sensor: Ov5647; Still Picture Resolution: 2592 X 1944; Frame Rate: 30Fps@1080P; Integral Ir Filter, For Noir Cs Mount Version, Check Asin: B013jv4z7k.
Customization Service: Please Contact Arducam If You Want To 8Mp Pi Camera Modules With Cs Mount Lens..
Application: Recommended To The Inventor, Maker, Hobbyist, Engineer, Someone Want To Get Better Quality For Both Still And Video Or Want To Change The Lens, For The Home Security System, Monitoring Octoprint 3D Printer, Etc..
Works Flawlessly: The Camera Can Be Installed On The Rasparian Os As A Pi Camera And The Raspistill And Raspivid Terminal Programs, Does Not Have Any Conflicts With The Rasparian Os..
Features
- An Improvement of Standard Pi Camera: With the CS mount lens, you can get a bit more clarity, focus, and the ability to change the lens, will fit many lenses with this mount type, telephoto, fish-eye, or other M12 lenses.
- Works Flawlessly: The camera can be installed on the Rasparian OS as a Pi camera and the raspistill and raspivid terminal programs, does not have any conflicts with the Rasparian OS.
- Sensor: OV5647; Still Picture Resolution: 2592 x 1944; Frame Rate: 30fps@1080p; Integral IR filter, for NoIR CS Mount version, check ASIN: B013JV4Z7K
- Application: Recommended to the inventor, maker, hobbyist, engineer, someone want to get better quality for both still and video or want to change the lens, for the home security system, monitoring Octoprint 3D printer, etc.
- Customization Service: please contact Arducam if you want to 8MP pi camera modules with CS mount lens.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #14
Arducam for Raspberry Pi Pico Camera, HM01B0 Monochrome QVGA Camera Module
Asin: B093KBQB1C | Model: B0315 | PartNumber: B0315
Consumption: Standby < 200Uw, <1.1Mw Qqvga Resolution At 30Fps, < 2Mw Qvga Resolution At 30Fps.
Easy To Connect: No Any Adapter Needed, Just Connect To Raspberry Pi Pico And Other Third-Party Rp2040 Boards With Pre-Soldered Header And Included Jump Wires, The Even Numbered Line Ports Are Reserved For Expansion..
Output: Configurable 1-Bit Video Data Serial Interface With Video Frame And Line Sync, And Motion Detection Wakeup Interrupt Output..
Key Specs: 320 X 320 Resolution, Supports For Qvga Window, Monochrome, Up To Qvga @ 60Fps.
Features
- This QVGA camera module features ultra low power consumption based on Himax HM01B0-MWA, designed for building machine vision projects and Always on Service applications.
- Key SPECS: 320 x 320 resolution, supports for QVGA window, Monochrome, up to QVGA @ 60FPS
- Consumption: Standby < 200uW, <1.1mW QQVGA resolution at 30FPS, < 2mW QVGA resolution at 30FPS
- Output: Configurable 1-bit video data serial interface with video frame and line sync, and motion detection wakeup interrupt output.
- Easy To Connect: No any adapter needed, just connect to Raspberry Pi pico and other third-party RP2040 boards with pre-soldered header and included jump wires, the even numbered line ports are reserved for expansion.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #15
Arducam for Raspberry Pi Camera Module 3, 12MP IMX708 66 (H) Fixed Focus Pi Camera V3, Compatible with Raspberry Pi 5/4B/3B+, Zero
Asin: B0BZR87TJP
Enjoy Faster Focusing And More Stable Images With A 66° Fixed Focus Lens And Built-In 2D Dpc And Qbc Re-Mosaic Functions, Providing High Snr And Ultra-High Quality Images..
Simplify Your Setup With Native Support For Raspberry Pi - No Additional Drivers Are Required! Compatible With Bullseye Os And Libcamera Command. Different From The Official Camera V3, This Camera Needs Some Modification On The Configuration Before Use. Please Refer To The Product Description Page For The Information In Detail..
Fully Support Libcamera And Picamera2, And Uses Csi-2 Serial Data Output With 2-Wire Serial Communication For Seamless Integration..
Capture Stunning High-Resolution Images With Imx708 Camera Module 3, Featuring A 12Mp Back-Illuminated Stacked Cmos And Hdr Mode Up To 3Mp Output - On Par With The Official Camera Module 3..
Features
- Arducam for Raspberry Pi camera v3 is compatible with Raspberry Pi all boards, 5/4B/3B, Pi Zero W/2 W.
- Capture stunning high-resolution images with IMX708 Camera Module 3, featuring a 12MP back-illuminated stacked CMOS and HDR mode up to 3MP output - on par with the Official Camera Module 3.
- Enjoy faster focusing and more stable images with a 66 fixed focus lens and built-in 2D DPC and QBC Re-mosaic functions, providing high SNR and ultra-high quality images.
- Fully support libcamera and Picamera2, and uses CSI-2 serial data output with 2-wire serial communication for seamless integration.
- Simplify your setup with native support for Raspberry Pi - no additional drivers are required! Compatible with Bullseye OS and libcamera command. Different from the official camera V3, this camera needs some modification on the configuration before use. Please refer to the product description page for the information in detail.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #16
Arducam Multi Camera Adapter for RaspberryPi Camera Module 3, Doubleplexer Stereo Module V2 for Raspberry Pi Zero, Pi 3/3 b+, 4b, 5
Asin: B07VD9XLYH | Model: B016601 | PartNumber: B016601
Alternative Work: Only One Of The Two Cameras Can Be Activated At A Time, And They Are Working In Alternate Ways..
Easy To Operate: A Simple Software Built To Run Two Cameras..
Compatibility: Designed Mainly For Raspberry Pi Zero, It Also Can Be Used For Raspberry Pi Boards With Minor Software Modifications. If You Are Using It On A Pi 5, 4B Or Pi 3B/B+, A 22-22Pin Fpc Camera Cable Is Needed..
Features
- Multi-Camera Solution: Fully compatible with Raspberry Pi Camera Module 3, up to two 5MP OV5647 or 8MP IMX219 or 12.3MP IMX477 or 12MP IMX708 cameras connected. No mixing allowed.
- Compatibility: Designed mainly for Raspberry pi Zero, it also can be used for Raspberry Pi boards with minor software modifications. If you are using it on a Pi 5, 4B or Pi 3B/B+, a 22-22pin FPC camera cable is needed.
- Alternative Work: Only one of the two cameras can be activated at a time, and they are working in alternate ways.
- Easy to Operate: A simple software built to run two cameras.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
Dimensions: 0.59 x 2.48 x 2.05 Inches | Weight: 0.04 pounds
See On Amazon #17
Arducam 4K 8MP IMX219 Autofocus USB Camera Module with Microphone, 1080P Mini UVC USB2.0 Webcam Board with 3.3ft/1m Cable for Computer, Laptop, Raspberry Pi, Jetson Nano
Asin: B08RHTG845 | Model: B0292 | PartNumber: B0292
Capture Video With Audio: Built With Microphone, Capture Video With Audio. Frame Rates: Mjpg 15Fps@3264 X 2448, 30Fps@1080P; Yuy2 15Fps@720P, 20Fps@640 X 480..
Applications: This Small 38Mmx38mm Camera Board Is Highly Recommended For A Home Surveillance System, Monitoring 3D Printer, Object Recognition And Tracking, Or Other Machine Vision Application..
Plug&Play: Uvc-Compliant, Just Connect The Camera To Pc, Laptop, Android Device Or Raspberry Pi With The Included Usb Cable Without Extra Drivers To Be Installed..
Autofocus: Shoot Objects In Millimeter Level And In The Distance On The Same Camera, Automatically Controlled Without Lens Adjustment Tool, Closer And Easier Than The Fixed Focus Camera..
Features
- More than HD: This camera adopts 8MP IMX219 sensor for sharp image and accurate color reproduction, Max. still resolution 3264H x 2448V.
- Autofocus: Shoot objects in millimeter level and in the distance on the same camera, automatically controlled without lens adjustment tool, closer and easier than the fixed focus camera.
- Capture Video with Audio: Built with microphone, capture video with audio. Frame Rates: MJPG 15fps@3264 x 2448, 30fps@1080P; YUY2 15fps@720P, 20fps@640 x 480.
- Plug&Play: UVC-compliant, just connect the camera to PC, laptop, Android device or Raspberry Pi with the included USB cable without extra drivers to be installed.
- Applications: This small 38mmx38mm camera board is highly recommended for a home surveillance system, monitoring 3D Printer, object recognition and tracking, or other machine vision application.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
See On Amazon #18
Arducam Cable Extension Kit for Raspberry Pi Camera, Up to 15-Meter Extension, Compatible with Raspberry Pi Camera V1/V2/HQ, and 16MP Autofocus Camera Module
Asin: B09TSDZ48F
Easy To Plug And Play: Setup Is Hassle-Free And Plug&Play. There Is No Need To Install Any Additional Software Or Scripts. Please Note That Updated Drivers Are Required If Working With Arducam Imx519 16Mp Af Camera (Asin: B09stl7s88)..
Package Includes: The Kit Includes Two Boards (Rx And Tx Board), A 1-Meter Lan Cable, Two 8Cm Ribbon Flex Cables For Mipi Csi-2 Transmission, And Mounting Screws..
Supported Cameras: Rpi Camera V1, Rpi Camera V2, Rpi High Quality (Hq) Camera, And Arducam 16Mp Autofocus Camera. It Can Work With The Synchronized Quad-Camera Kit (Asin: B09tsgmcm9) For A 15-Meter Connection Too..
Extend Up To 15 Meters: With Just One Lan/Ethernet Cable, You Can Place The Camera Module Up To 15 Meters Away From The Pi..
Features
- Designed for Raspberry Pi: This extension cable kit is designed for Raspberry Pi and Raspberry Pi cameras. The purpose is to keep your camera long away from the Pi. This way you can get clear and delay-free images no matter where you put your Pi.
- Extend up to 15 meters: With just one LAN/Ethernet cable, you can place the camera module up to 15 meters away from the Pi.
- Easy to plug and play: Setup is hassle-free and plug&play. There is no need to install any additional software or scripts. Please note that updated drivers are required if working with Arducam IMX519 16MP AF camera (ASIN: B09STL7S88).
- Supported cameras: RPi Camera V1, RPi Camera V2, RPi High Quality (HQ) Camera, and Arducam 16MP autofocus camera. It can work with the synchronized quad-camera kit (ASIN: B09TSGMCM9) for a 15-meter connection too.
- Package includes: The kit includes two boards (Rx and Tx board), a 1-meter LAN cable, two 8cm ribbon flex cables for MIPI CSI-2 Transmission, and mounting screws.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
Warranty: 6 Months
See On Amazon #19
Arducam for Raspberry Pi 5 Camera Module, 1/1.32" 64MP High Resolution Auto Focus Camera Module for Raspberry Pi 3/4/5, Native to Support Libcamera, Comes with ABS Case
Asin: B0CQJPKFVF
64Mp & 10X Digital Zoom: This Camera Module Is Equipped With High-Resolution 64Mp And 10X Digital Zoom For Impeccable Detail. Note: Raspberry Pi 2/3/Zero W May Not Be Able To Enable Maximum Resolution Due To Ram, Please Make Sure Your Platform Has Ram Greater Than Or Equal To 1G. Capturing Maximum Resolution On The Pi 4 And Cm4 May Be Impacted By Cma, Which Can Be Fixed By Switching The Gui Mode To Terminal Mode..
Compact & Compatible Design: This 64Mp Camera Module Is Also A Mini Camera, The Size Is 24X25mm And Comes With An Abs Case, Compatibility For Seamless Use. Note: The Tripod Is Not Included In The Parcel..
Note: Please Ensure To Use The Latest Version Of Libcamera And The Latest System. For Other Versions, Please Refer To The Link In The Manual That Comes With The Product..
Flexible Focus Choices: It Is Not Just An Autofocus Camera, There Are Flexible Focus Solutions For You To Choose From: Auto, Manual, And Continuous Focus Options For Diverse Environments..
Largest Sensor, Superb Light Sensitivity: This Pi Camera Adopts A Massive 9248×6944 Sensor Excels, Ideal For Night Shots..
Features
- libcamera Ready: This Arducam OwlSight Ultra-high Resolution Camera is easy to set up with native libcamera support.
- Largest Sensor, Superb light sensitivity: This Pi camera adopts a massive 9248 6944 sensor excels, ideal for night shots.
- 64MP & 10x Digital Zoom: This camera module is equipped with high-resolution 64MP and 10x digital zoom for impeccable detail. Note: Raspberry Pi 2/3/Zero W may not be able to enable maximum resolution due to RAM, please make sure your platform has RAM greater than or equal to 1G. Capturing maximum resolution on the Pi 4 and CM4 may be impacted by CMA, which can be fixed by switching the GUI mode to terminal mode.
- Flexible Focus Choices: It is not just an autofocus camera, there are flexible focus solutions for you to choose from: Auto, manual, and continuous focus options for diverse environments.
- Compact & Compatible Design: This 64MP camera module is also a mini camera, the size is 24x25mm and comes with an ABS case, compatibility for seamless use. Note: The tripod is not included in the parcel.
- Note: Please ensure to use the latest version of libcamera and the latest system. For other versions, please refer to the link in the manual that comes with the product.
- See more on Amazon...
Brand: Arducam | Manufacturer: Arducam
Warranty: 6 months
See On Amazon
Looking For Something Else?
Search