MECCANIXITY Lamp Pipe Kit with Lock Nuts Teeth Washers 1/8IP Thread Fasteners Assortment for Chandelier Ceiling Light Repair Assembly DIY Hardware, Pack of 84
Asin: B09YV689RR | Model: mea220124ee0310 | PartNumber: mea220124ee0310
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Made Of Iron Material, Zinc Coated Finished Surface, With Good Strength And Rust Resistance. Washers With Teeth Can Grip The Surface Firmly When You Turning The Nuts. This Kit Can Save Your Time To Search The Nuts, Pipes And Washers One By One..
Please Check The Thread Size Before Buying..
Easy To Use, Put The Washers Through The Threaded Pipe Firstly ,Then Screw The Nuts Into The Threaded Pipe, No Need For Tools..
Thread Size: 1/8Ip; Lamp Pipes Length: 2Cm(0.8"), 2.5Cm(0.98"), 3Cm(1.2"), 3.5Cm(1.4"), 4Cm(1.6"), 5Cm(2"), 6Cm(2.4"); Lamp Pipe Id: 7Mm / 0.28"; Hex Nut Width: 13.5Mm / 0.53"; Hex Nut Height: 3Mm / 0.12"; Teeth Washers Size: 10.5Mmx17mm / 0.41"X0.67".
Features
- These hex nuts are common hardware to screw into the threaded lamp pipe. And the standard washer is for spreading the load of fastened fittings' surface. Commonly used on securing thread pipes for assembling, replacing, repairing chandelier,ceiling light or making other DIY lamp projects.
- Thread Size: 1/8IP; Lamp Pipes Length: 2cm(0.8), 2.5cm(0.98), 3cm(1.2), 3.5cm(1.4), 4cm(1.6), 5cm(2), 6cm(2.4); Lamp Pipe ID: 7mm / 0.28; Hex Nut Width: 13.5mm / 0.53; Hex Nut Height: 3mm / 0.12; Teeth Washers Size: 10.5mmx17mm / 0.41x0.67
- Made of iron material, zinc coated finished surface, with good strength and rust resistance. Washers with teeth can grip the surface firmly when you turning the nuts. This kit can save your time to search the nuts, pipes and washers one by one.
- Easy to use, put the washers through the threaded pipe firstly ,then screw the nuts into the threaded pipe, no need for tools.
- Please check the thread size before buying.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon Similar To MECCANIXITY Lamp Pipe Kit with
#1
MECCANIXITY G4 Lamp Hardware Fixtures Kit, with M10 Thread Lamp Pipe Hex Nut Socket Cap Fit for G4 Bulb Socket, Pack of 10
Asin: B0BC3YHBPL | Model: mea220506ee0783 | PartNumber: mea220506ee0783
Metal Material, Durable To Use. Lamp Pipe Is Hollow, The Wires Connected To Bulb Socket Can Pass Through It Easily. M10 Thread Can Provide A Firm And Tight Connection..
Please Note That G4 Bulb Socket Is Not Included Here. You Need To The G4 Bulb Socket Yourself..
Easy To Use, Plug The Bulb Socket Into Sockets Directly, No Need For Using Other Tools..
Thread Size: M10*1Mm; Fit For Bulb Socket Size: G4 Bulb Socket; Hex Nut Size: 14X3mm / 0.55"X0.12"; Lamp Pipe Size: 20X9.5Mm / 0.79"X0.37" (Length X Diameter); G4 Socket Cap Size: 11.5X5mm / 0.45"X0.2" (Length X Thickness).
Features
- G4 lamp fixtures are common accessories and parts used on the G4 bulb socket. Widely used on crystal lamps and halogen lamps.
- Thread Size: M10*1mm; Fit for Bulb Socket Size: G4 Bulb Socket; Hex Nut Size: 14x3mm / 0.55x0.12; Lamp Pipe Size: 20x9.5mm / 0.79x0.37 (Length x Diameter); G4 Socket Cap Size: 11.5x5mm / 0.45x0.2 (Length x Thickness)
- Metal material, durable to use. Lamp pipe is hollow, the wires connected to bulb socket can pass through it easily. M10 Thread can provide a firm and tight connection.
- Easy to use, plug the bulb socket into sockets directly, no need for using other tools.
- Please note that G4 bulb socket is not included here. You need to the G4 bulb socket yourself.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #2
PIPE DECOR Reader Table Lamp, Vintage Industrial Pipe Design, Dimmable Desk Lamp, DIY with Swag Kit
Asin: B07X3Q4K7X | Model: 365 LAMP2 | PartNumber: 365 LAMP2 | Ean: 0019442552671 | UPC: 019442552671
Assembly Is Required: This Lamp Is For People Who Are A Bit Diy Inclined, But With A Bit Of Courage And Determination You Will Have Yourself A Great Looking Lamp. It Is Not That Bad, But It Is Also Not Ready To Use Out Of The Box. Please Refer To Our Installation Video Or Reach Out To Us Should You Need Any Help. Lightbulb Not Included..
We Are Here To Help: Please Reach Out To Us Should You Have Any Questions, Concerns, Or Complaints. We Take Pride In The Quality Products That We Offer And The Care That We Provide Our Customers. Please Take A Look At The Wide Array Of Other Pipe Décor Pieces And Kits That We Have For Sale To Give Your Space A More Complete Look As Well. Have A Wonderful Day..
Components And Specifications: This Kit Comes With All Necessary Pipes, Pieces, And Swag Kit Needed For Instillation. The Socket Will Fit Most Incandescent, Cfl And Led Bulb With A Standard E26 Or E27 Sized Base. This Swag Kit Comes With A High To Low Dimmer, Has A Maximum Of 150 Watts, Comes With 11 Feet Of Cord, And Features An Easy To Install Push Connect Design..
Authentic Industrial Pipe. These Are Authentic Iron Pipes And Fittings Built To Stand The Test Of Time. Please Be Aware That These Components Come Coated In A Light Industrial Grease In Order To Slow The Rusting Process That Gradually Occurs Over Time. Cleaning And Sealing Is Required For Those Who Desire A More Finished Look. Most Installations Are Left Unfinished, But We Understand That Everyone's Tastes Are Different, And Have Included Cleaning Instructions For Those Who Favor A Neater Style..
Features
- VINTAGE INDUSTRIAL DESIGN: Tie your room together with a vintage industrial table lamp. This dark grey lamp is perfect piece to bring some light to any desk, nightstand, or end table. Bring some warmth into any bedroom or living room and consider pairing your new lamp with an Edison bulb to accentuate the rustic aesthetic.
- AUTHENTIC INDUSTRIAL PIPE. These are authentic iron pipes and fittings built to stand the test of time. Please be aware that these components come coated in a light industrial grease in order to slow the rusting process that gradually occurs over time. CLEANING AND SEALING IS REQUIRED FOR THOSE WHO DESIRE A MORE FINISHED LOOK. Most installations are left unfinished, but we understand that everyone's tastes are different, and have included cleaning instructions for those who favor a neater style.
- ASSEMBLY IS REQUIRED: This lamp is for people who are a bit DIY inclined, but with a bit of courage and determination you will have yourself a great looking lamp. It is not that bad, but it is also not ready to use out of the box. Please refer to our installation video or reach out to us should you need any help. Lightbulb not included.
- COMPONENTS AND SPECIFICATIONS: This kit comes with all necessary pipes, pieces, and swag kit needed for instillation. The socket will fit most incandescent, CFL and LED bulb with a standard E26 or E27 sized base. This swag kit comes with a high to low dimmer, has a maximum of 150 watts, comes with 11 feet of cord, and features an easy to install push connect design.
- WE ARE HERE TO HELP: Please reach out to us should you have any questions, concerns, or complaints. We take pride in the quality products that we offer and the care that we provide our customers. Please take a look at the wide array of other PIPE D COR pieces and kits that we have for sale to give your space a more complete look as well. Have a wonderful day.
- See more on Amazon...
Brand: PIPE DECOR | Manufacturer: PIPE DÉCOR
Dimensions: 17.50 x 7.00 x 4.50 Inches | Weight: 4.13 Pounds
See On Amazon #3
MECCANIXITY Threaded Extension Rod, 9.8" Lamp Pipe with Connector Light Fixture for Pendant Light Island Lighting Chandeliers Stems, Electrophoresis Gold
Asin: B0BB8221PS
Made Of Metal Material, Electroplated Surface, With Good Appearance. The Sloped Ceiling Adapter In The Kit Can Help You Install Chandeliers On Sloping Ceilings, And The Rotation Angle Is 180 Degrees..
Please Check The Thread Size Before Buying. (Our Package Content: 4 X Long Coupling Nut, 8 X 40Mm Long Thread Pipe, 1 X 20Mm Long Thread Pipe, 1 X Sloped Ceiling Adapter, 1 X Small Hex Nut, 1 X Washer).
Easy To Install, Screw The Nuts, Thread Pipe, And Sloped Ceiling Adapter Together..
Material: Iron Electroplated; Color: Electrophoresis Gold; Thread Size: M10; Thread Pitch: 1Mm; Long Coupling Nut Size: 11.5X250mm / 0.45"X9.8" (Diameter*Length); Threaded Pipe Length(Two Size Included): 40Mm / 1.58", 20Mm / 0.79"; Sloped Ceiling Adapter Size: 46X15mm / 1.8"X0.59".
Features
- A common light fixtures accessory kit for the repairing and restoring of ceiling lamps and chandeliers, or DIY making. These light fixture accessories are suitable for installing chandeliers on sloping ceilings.
- Material: Iron Electroplated; Color: Electrophoresis Gold; Thread Size: M10; Thread Pitch: 1mm; Long Coupling Nut Size: 11.5x250mm / 0.45x9.8 (Diameter*Length); Threaded Pipe Length(Two Size Included): 40mm / 1.58, 20mm / 0.79; Sloped Ceiling Adapter Size: 46x15mm / 1.8x0.59
- Made of metal material, electroplated surface, with good appearance. The sloped ceiling adapter in the kit can help you install chandeliers on sloping ceilings, and the rotation angle is 180 degrees.
- Easy to install, screw the nuts, thread pipe, and sloped ceiling adapter together.
- Please check the thread size before buying. (Our Package Content: 4 x Long Coupling Nut, 8 x 40mm Long Thread Pipe, 1 x 20mm Long Thread Pipe, 1 x Sloped Ceiling Adapter, 1 x Small Hex Nut, 1 x Washer)
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #4
MECCANIXITY Lamp Pipe, 1.97 Inch Long M10 All Thread Extension Rod for Chandelier Pendant Lights with M10 Hex Nut Fastener, 1 Set
Asin: B09KR55FR5 | Model: mef210825ee0031 | PartNumber: mef210825ee0031
Made Of Zinc Alloy Material, With Good Strength And Rust Resistance. The Lamp Rod Has A Hollow Center To Allow The Lamp Cord Or Wire To Run Through It. Hex Nut Included Can Make Sure The Connection Is Tight..
Please Check The Thread Size Before Buying To Make Sure It Will Fit Your Project..
Install The Lamp Pipe Into A Ceiling Tapped Hole With Included Hex Nut..
Thread Size: M10; Overall Length: 50Mm(1.97"); Inner Diameter(Approx): 7Mm(0.28"); Outer Diameter(Approx): 10Mm(0.39"); Hex Nut Width: 14Mm(0.55"); Hex Nut Height: 3Mm(0.12").
Features
- Good lamp hardware for socket extension. Widely used for replacing, repairing pendant light in home and office, or making other DIY lamp projects.
- Thread Size: M10; Overall Length: 50mm(1.97); Inner Diameter(Approx): 7mm(0.28); Outer Diameter(Approx): 10mm(0.39); Hex Nut Width: 14mm(0.55); Hex Nut Height: 3mm(0.12)
- Made of zinc alloy material, with good strength and rust resistance. The lamp rod has a hollow center to allow the lamp cord or wire to run through it. Hex nut included can make sure the connection is tight.
- Install the lamp pipe into a ceiling tapped hole with included hex nut.
- Please check the thread size before buying to make sure it will fit your project.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #5
KUMGROT White Straight Pipe Lamp Stem Kit 3.94"/100mm Finish Lamp Rod Kit with Connector M10 Replacement Light Fixture Parts Lamp Making Kit Lamp Riser, 6 PCS
Asin: B0CNRNQXS6
Material: Iron Craft, Surface Black Paint Wrapped, Anti-Corrosion And Anti-Rust, Wear-Resistant And Durable..
Widely Used: Can Be Used To Replace, Repair, Diy A Variety Of Lamps And Lanterns, Such As Table Lamps, Ceiling Lights, Star Lights, Etc..
Hollow Lamp: Internal Hollow, Diameter 0.28", Can Facilitate The Penetration Of The Lamp Line, Beautify The Visual Effect..
Package: 6 Light Poles, 6 Couplings, Large Quantity To Meet Different Needs..
Features
- Size: 100mm (3.94") long, 3/8" OD, double port tube with M10 thread; connector 20mm (0.79") long, 3/8" diameter
- Package: 6 light poles, 6 couplings, large quantity to meet different needs.
- Material: iron craft, surface black paint wrapped, anti-corrosion and anti-rust, wear-resistant and durable.
- Hollow lamp: internal hollow, diameter 0.28, can facilitate the penetration of the lamp line, beautify the visual effect.
- Widely used: can be used to replace, repair, DIY a variety of lamps and lanterns, such as table lamps, ceiling lights, star lights, etc.
- See more on Amazon...
Brand: KUMGROT | Manufacturer: KUMGROT
See On Amazon #6
MECCANIXITY Acrylic Pipe Clear Rigid Round Tube 51mm(2") ID 55mm(2 3/16") OD 14" for Lamps and Lanterns, Water Cooling System 2pcs
Asin: B0B9C2RL9Q | Model: mea220507ee0482 | PartNumber: mea220507ee0482
Round Pmma Tube Made In Pmma Material, Durable And Long Service Life; High Transparency, High Light Transmission; Round Tubing Has Very High Impact Resistance.
Please Note : Please Select The Appropriate Size Of Acrylic Pipe, Especially The Size Of Inner Diameter And Outer Diameter. Acrylic Pipe Can Be Used In Water Cooling System. It Should Be Noted That The Silicone Tube Insert(Prevents Kinks) And Professional Bending Tools Are Required For Bending.
Steps Of Installation:1.Prepare Pmma Pipe Of An Appropriate Size ; 2.Cut Out The Length You Want.
The Acrylic Plastic Tubing, Is In Size Of : 51Mm/2-Inch Inner Dia, 55Mm/2.17-Inch Outer Dia, 35Cm/14-Inch Total Length.
Features
- With high transparency, transparent acrylic tube has strong light transmittance when used in lamps and lanterns. When it is used for liquid transportation, the flow of liquid in the tube can also be clearly seen. Transparent PMMA tube is widely used for lamps and lanterns, water cooling system, building materials, handicrafts, DIY, and so on.
- The acrylic plastic tubing, is in size of : 51mm/2-inch inner dia, 55mm/2.17-inch outer dia, 35cm/14-inch total length
- Round PMMA tube made in PMMA material, durable and long service life; High transparency, high light transmission; Round Tubing has very high impact resistance
- Steps of installation:1.Prepare PMMA pipe of an appropriate size ; 2.Cut out the length you want
- Please Note : Please select the appropriate size of acrylic pipe, especially the size of inner diameter and outer diameter. Acrylic pipe can be used in water cooling system. It should be noted that the silicone tube insert(prevents kinks) and professional bending tools are required for bending
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #7
MECCANIXITY Lamp Pipes with Lock Nuts Washers 4 Size Rod 1/8IP Thread Fasteners Assortment for Chandelier Ceiling Light Repair Assembly DIY Hardware, Pack of 84
Asin: B09YV4MYVX | Model: mea220124ee0317 | PartNumber: mea220124ee0317
Made Of Iron Material, Zinc Coated Finished Surface, With Good Strength And Rust Resistance. Washers With Teeth Can Grip The Surface Firmly When You Turning The Nuts. This Kit Can Save Your Time To Search The Nuts, Pipes And Washers One By One..
Please Check The Thread Size Before Buying..
Easy To Use, Put The Washers Through The Threaded Pipe Firstly ,Then Screw The Nuts Into The Threaded Pipe, No Need For Tools..
Thread Size: 1/8Ip; Lamp Pipes Length: 2Cm(0.8"), 2.5Cm(1"), 4Cm(1.6"), 5Cm(2"); Lamp Pipe Id: 7Mm / 0.28"; Hex Nut Width: 13.5Mm / 0.53"; Hex Nut Height: 3Mm / 0.12"; Teeth Washers Size: 10.5Mmx17mm / 0.41"X0.67"; Flat Washers Size: 10Mmx20mm / 0.39"X0.79".
Features
- These hex nuts are common hardware to screw into the threaded lamp pipe. And the standard washer is for spreading the load of fastened fittings' surface. Commonly used on securing thread pipes for assembling, replacing, repairing chandelier,ceiling light or making other DIY lamp projects.
- Thread Size: 1/8IP; Lamp Pipes Length: 2cm(0.8), 2.5cm(1), 4cm(1.6), 5cm(2); Lamp Pipe ID: 7mm / 0.28; Hex Nut Width: 13.5mm / 0.53; Hex Nut Height: 3mm / 0.12; Teeth Washers Size: 10.5mmx17mm / 0.41x0.67; Flat Washers Size: 10mmx20mm / 0.39x0.79
- Made of iron material, zinc coated finished surface, with good strength and rust resistance. Washers with teeth can grip the surface firmly when you turning the nuts. This kit can save your time to search the nuts, pipes and washers one by one.
- Easy to use, put the washers through the threaded pipe firstly ,then screw the nuts into the threaded pipe, no need for tools.
- Please check the thread size before buying.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #8
MECCANIXITY Threaded Extension Rod, 11.8" Lamp Pipe with Connector Light Fixture for Pendant Light Island Lighting Chandeliers Stems, Gold Tone 4 Set
Asin: B0BB7R3QTV | Model: mea220620ee0464 | PartNumber: mea220620ee0464
Made Of Metal Material, Electroplated Surface, With Good Appearance, And Durable To Use. Easy To Use, No Need For Tools..
Please Check The Thread Size Before Buying. (Package Content: 4 X Long Coupling Nut, 8 X 40Mm Long Thread Pipe, 8 X Small Hex Nut).
Easy To Install, Each Coupling Nut Can Connect Two Pipes On Both End. After That, Use The Small Hex Nut To Fasten..
Material: Iron Electroplated; Color: Gold Tone; Thread Size: M10; Thread Pitch: 1Mm; Long Coupling Nut Size: 11.5X300mm / 0.45"X11.8" (Diameter*Length); Threaded Pipe Length: 40Mm / 1.58".
Features
- The M10 coupling nut can connect two M10 all threaded pipes together. It is a common light fixtures accessory kit for the repairing and restoring of ceiling lamps and chandeliers, or DIY making.
- Material: Iron Electroplated; Color: Gold Tone; Thread Size: M10; Thread Pitch: 1mm; Long Coupling Nut Size: 11.5x300mm / 0.45x11.8 (Diameter*Length); Threaded Pipe Length: 40mm / 1.58
- Made of metal material, electroplated surface, with good appearance, and durable to use. Easy to use, no need for tools.
- Easy to install, each coupling nut can connect two pipes on both end. After that, use the small hex nut to fasten.
- Please check the thread size before buying. (Package Content: 4 x Long Coupling Nut, 8 x 40mm Long Thread Pipe, 8 x Small Hex Nut)
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #9
MECCANIXITY G4 Lamp Hardware Fixtures Kit, with M10 Thread Lamp Pipe Hex Nut Socket Cap Fit for G4 Bulb Socket, Pack of 5
Asin: B0BC41FW2B
Metal Material, Durable To Use. Lamp Pipe Is Hollow, The Wires Connected To Bulb Socket Can Pass Through It Easily. M10 Thread Can Provide A Firm And Tight Connection..
Please Note That G4 Bulb Socket Is Not Included Here. You Need To The G4 Bulb Socket Yourself..
Easy To Use, Plug The Bulb Socket Into Sockets Directly, No Need For Using Other Tools..
Thread Size: M10*1Mm; Fit For Bulb Socket Size: G4 Bulb Socket; Hex Nut Size: 14X3mm / 0.55"X0.12"; Lamp Pipe Size: 20X9.5Mm / 0.79"X0.37" (Length X Diameter); G4 Socket Cap Size: 11.5X5mm / 0.45"X0.2" (Length X Thickness).
Features
- G4 lamp fixtures are common accessories and parts used on the G4 bulb socket. Widely used on crystal lamps and halogen lamps.
- Thread Size: M10*1mm; Fit for Bulb Socket Size: G4 Bulb Socket; Hex Nut Size: 14x3mm / 0.55x0.12; Lamp Pipe Size: 20x9.5mm / 0.79x0.37 (Length x Diameter); G4 Socket Cap Size: 11.5x5mm / 0.45x0.2 (Length x Thickness)
- Metal material, durable to use. Lamp pipe is hollow, the wires connected to bulb socket can pass through it easily. M10 Thread can provide a firm and tight connection.
- Easy to use, plug the bulb socket into sockets directly, no need for using other tools.
- Please note that G4 bulb socket is not included here. You need to the G4 bulb socket yourself.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #10
MECCANIXITY Chandelier Light Socket Kit for E12 Candelabra, Lamp Base with Wire White Candle Cover Sleeves 4 Set
Asin: B09QFWF9G3 | Model: mea211130ee0193 | PartNumber: mea211130ee0193
Made Of Durable Pp Material. Light Socket Thread Specification Is M10 (For 1/8 Ip), Can Install Most Standard Lamps Pipe Or Threaded Rods. It Is Heat-Resistant Up To 100°C. The Candle Socket Cover Looks Like A Real Candle, Attractive Appearance.
Note: Please Read The Measurements Before Ordering If You Are Concerned About The Size..
Take Down The Old, Replace Discolored Old, Damaged Or Missing Chandelier Covers Or Light Socket.
Light Socket Color: Black; Candle Cover Sleeve Color: White; Light Socket Thread: M10*1Mm; Light Socket Size: 19 X 95Mm / 0.74 * 3.7 Inch (Od*H); Candle Cover Sleeve Size: 20 X 105 Mm / 0.78 * 4.1 Inch (Id*H); Wattage: 0-75W; Voltage: 0-125V; Wire Length: 25Cm / 9.84 Inch Tall.
Features
- Bulb light holder kits come with candle covers.The decorative cover can decorate your lamp and make it look like a candle. The special appearance enhances the atmosphere, great for your chandelier socket project
- Light Socket Color: Black; Candle Cover Sleeve Color: White; Light Socket Thread: M10*1mm; Light Socket Size: 19 x 95mm / 0.74 * 3.7 inch (OD*H); Candle Cover Sleeve Size: 20 x 105 mm / 0.78 * 4.1 inch (ID*H); Wattage: 0-75W; Voltage: 0-125V; Wire length: 25cm / 9.84 Inch Tall
- Made of durable PP material. Light socket thread specification is M10 (for 1/8 IP), can install most standard lamps pipe or threaded rods. It is heat-resistant up to 100 C. The candle socket cover looks like a real candle, attractive appearance
- Take down the old, replace discolored old, damaged or missing chandelier covers or light socket
- NOTE: Please read the measurements before ordering if you are concerned about the size.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon
Looking For Something Else?
Search