LCYLFH Phonograph Turntable Ground Wire for Magnetic Cartridge Turntables, 5-ft Technic (1 Pack)
Asin: B09Z1R43R3 | Model: LC-202202 | PartNumber: LC-202202
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Durable Material】 Phonograph Turntable Ground Wire Is Made From Durable High Quality Material And Well-Tested By The Manufacturer..
【Easy Installation】 5-Ft Ground Wire Has Spade Lugs On Each End For Easy Installation. Connect One End To The Grounding Lug On The Turntable And The Other End To The Grounding Lug Or Chassis Screw On The Receiver/Amplifier Or Pre-Amplifier, Fits All Domestic And Professional Record Decks..
Features
- No more hum Use the turntable ground wire can eliminates hum and static electricity, no more hum, for magnetic cartridge turntables such as Technics, help you enjoy music.
- Easy Installation 5-ft ground wire has spade lugs on each end for easy installation. Connect one end to the grounding lug on the turntable and the other end to the grounding lug or chassis screw on the receiver/amplifier or pre-amplifier, Fits all domestic and professional record decks.
- Durable Material Phonograph Turntable Ground Wire is made from durable high quality material and well-tested by the manufacturer.
- See more on Amazon...
Brand: LCYLFH | Manufacturer: LCYLFH
Dimensions: 0.50 x 3.50 x 1.20 Inches
See On Amazon Similar To LCYLFH Phonograph Turntable Ground Wire
#1
RCA Cable with Ground Wire, 10ft Turntable Cable Gold Plated 2RCA Male to 2RCA Male with Ground Wire Stereo Interconnect Cable UIInosoo for Turntable, Preamp, Record Player, Amplifier
Asin: B0978Y1KY9 | Model: RF0A0239A-CA | PartNumber: RF0A0239A-CA
This Cable Is Perfect For Use With All Turntables Requiring A Ground Wire, And Designed To Connect A Turntable To An Amplifier, Dj Mixer, Or Phono Preamp, Record Player And Other Equipment With 2Rca Port..
We Offer Worry-Free Warranty And Friendly Customer Service Within 12 Months For Your Confident Purchase. If You Are Not Satisfied With Any Product, Please Don’T Hesitate To Contact Us, We Will Serve You Our Best..
Length: 10Ft..
This Rca Cable Is Very Flexible, Doesn't Get Tangled, And Easy To Use. It Is Made Of High Purity Copper And Double Shileding Delivers Superior Signal Transfer And Low Noise Level, The Gold Plated Connectors Ensure Strong And Durable Component Connections, Improve The Signal Transmission, And Allows For Long Cable Life..
Features
- This RCA cable is high performance audio cable designed specifically for use with turntables. It can be running from the turntable back to the preamp for better sound effects. Product upgrade: We have lengthened the ground wire to make it more convenient for you to use.
- This RCA cable is very flexible, doesn't get tangled, and easy to use. It is made of high purity copper and double shileding delivers superior signal transfer and low noise level, the gold plated connectors ensure strong and durable component connections, improve the signal transmission, and allows for long cable life.
- This cable is perfect for use with all turntables requiring a ground wire, and designed to connect a turntable to an amplifier, DJ mixer, or phono preamp, record player and other equipment with 2RCA port.
- Length: 10ft.
- We offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please don t hesitate to contact us, we will serve you our best.
- See more on Amazon...
Brand: Ullnosoo | Manufacturer: Ullnosoo
See On Amazon #2
Sam&Johnny Turntable Ground Wire for Vinyl Record Player, LP Vinyl Magnetic Cartridge Turntables, 5-ft Solid Copper Technic
Asin: B0B4HK85KJ | Ean: 0689713727253 | UPC: 689713727253
For Magnetic Cartridge Turntables Such As Technics Sl-1200 Mk2, Sl-1200 Mk3, Sl-1200 Mk5, Sl-1200 M3d, Sl-1200M5g, Sl-1210 Mk2, Sl-1210 Mk3, Sl-1210 Mk5, Sl-1210 M3d, Sl-1210M5g, Sl-1700, Sl-1710, Sl-1800, Sl-1810, Sl-1900, Sl-1910 Series Etc Earth Lead Ground Wire..
5-Ft (60 Inches) Turntable Ground Wire For Easy Installation, 36 Month Manufacturer Warranty - 100% Satisfaction Guarantee..
Turntables Ground Wire Has A 'Spade' Lug Slip Under The "Gnd" Receptacle On Of Your Turntable Or Computer And The Other End 'Spade' Lug At One End That Can Slip Under A Metal Ground/Chassis Screw On Your Amp/Receiver. We Ground Wire Is For Many Technics And A Few Other Brands Of Turntables / Receiver / Amplifier / Vacuum Tubes Amplifier, Domestic And Professional Record Decks..
Turntable Ground Wire, 5-Ft 18 Awg Flexible Multi-Strand Copper Wire, Manufactured With Ultra-Flexible Power-Flex Cable Has Low Resistance And High Conductivity, Better Than Original Ground Wire..
Features
- STOPS hum, Phonograph Turntable Ground Wire Connect the two devices to achieve voltage balance, Ensures optimal sound quality, Protects your equipment from damage.
- Turntable Ground Wire, 5-ft 18 AWG flexible multi-strand copper wire, manufactured with ultra-flexible Power-Flex Cable has low resistance and high conductivity, better than original Ground Wire.
- For Magnetic Cartridge Turntables Such as Technics SL-1200 MK2, SL-1200 MK3, SL-1200 MK5, SL-1200 M3D, SL-1200M5G, SL-1210 MK2, SL-1210 MK3, SL-1210 MK5, SL-1210 M3D, SL-1210M5G, SL-1700, SL-1710, SL-1800, SL-1810, SL-1900, SL-1910 series etc Earth Lead Ground Wire.
- Turntables ground wire has a 'spade' lug slip under the GND receptacle on of your turntable or computer and the other end 'spade' lug at one end that can slip under a metal ground/chassis screw on your amp/receiver. we ground wire is for many Technics and a few other brands of turntables / receiver / amplifier / Vacuum Tubes amplifier, domestic and professional record decks.
- 5-ft (60 inches) Turntable Ground Wire for easy installation, 36 Month Manufacturer Warranty - 100% Satisfaction Guarantee.
- See more on Amazon...
Brand: Sam&Johnny | Manufacturer: Sam&Johnny
See On Amazon #3
Pfanstiehl Turntable Phonograph Lead Wires Stereo Cartridge Headshell Wires
Asin: B0082RAUMQ | Model: 8541625076 | PartNumber: 8541625076 | Ean: 0034998050013 | UPC: 034998050013
Lh-White, Lg-Blue, Rh-Red, Rg-Green..
Be Careful Not Bend Terminal Ends..
To Install Use Long Nose Pliers/Tweezers And Line Up Terminals With Pins And Carefully Slide On..
Brand New 4-Piece Color-Coded..
Features
- Phonograph cartridge 4 conductor stereo lead wire set.
- Brand new 4-piece color-coded.
- LH-white, LG-blue, RH-red, RG-green.
- To install use long nose pliers/tweezers and line up terminals with pins and carefully slide on.
- Be careful not bend terminal ends.
- See more on Amazon...
Brand: LKG | Manufacturer: LKG Industries
See On Amazon #4
Phonograph Turntable Ground Wire for Magnetic Cartridge Turntables, 5-ft Technic
Asin: B07VNPPNRN | Ean: 6411494461729
5-Ft Wire Has Spade Lugs On Each End For Easy Installation..
Features
- Product description No more hum - Eliminates hum and static electricity. For magnetic cartridge turntables such as Technics. Attaches to the grounding lug on the turntable and connects to the grounding lug or chassis screw on the receiver / amplifier or pre-amplifier.
- 5-ft wire has spade lugs on each end for easy installation.
- See more on Amazon...
Brand: JL | Manufacturer: JL
Weight: 0.04 pounds
See On Amazon #5
Phonograph Turntable Ground Wire for Magnetic Cartridge Turntables, 5-ft Technic
Asin: B087JJZPX6 | Model: IE-200 | PartNumber: IE-200 | Ean: 6451355475571
Attaches To The Grounding Lug On The Turntable And Connects To The Grounding Lug Or Chassis Screw On The Receiver / Amplifier Or Pre-Amplifier..
5-Ft Wire Has Spade Lugs On Each End For Easy Installation.Fits All Domestic And Professional Record Decks..
No More Hum - Eliminates Hum And Static Electricity. For Magnetic Cartridge Turntables Such As Technics..
Features
- Phonograph Turntable Ground Wire for Magnetic Cartridge Turntables, 5-ft .
- No more hum - Eliminates hum and static electricity. For magnetic cartridge turntables such as Technics.
- Attaches to the grounding lug on the turntable and connects to the grounding lug or chassis screw on the receiver / amplifier or pre-amplifier.
- 5-ft Wire has spade lugs on each end for easy installation.Fits all domestic and professional record decks.
- See more on Amazon...
Brand: TUAIC | Manufacturer: A-H
Weight: 0.04 pounds
See On Amazon #6
Komitasui Phonograph Turntable Ground Wire for Technics SL-BD21 SL-BD3 SL-QL5 SL-6 Magnetic Cartridge Turntables - Stop Hum, 5-ft Technic
Asin: B0CQPFKVQS | Model: For technics ground wire #SFEL026L01E | PartNumber: For technics ground wire #SFEL026L01E | Ean: 0658358679081 | UPC: 658358679081
We Ground Wire Replacement Part Is Manufactured With Ultra-Flexible Power-Flex Cable. The Wire Has Low Resistance And High Conductivity, Corrosion Resistant, Turntable Ground Connector Is Soldered To Wire..
5-Ft (60 Inch) Long, 18 Awg Flexible Multi-Strand Copper Wire For Easy Installation, Please Make Sure Your Technics Black Turntable Grounding Hole Is A Female Sockets. 36 Month Manufacturer Warranty- 100% Satisfaction Guarantee..
We Black Turntable Ground Wire Has A 'U' Lug At One End That Can Slip Under A Metal Ground/Chassis Screw On Your Receiver / Amplifier / Pre-Amplifier Or Computer And The Other End Has Round Plug That Goes Into The "Gnd" Receptacle On The Back Of Your Turntable, Better Than Technics Original..
Stop 'Hum Hum' Compatible With Technics Turntable Sl-Bd21 Sl-Bd3 Sl-Ql5 Sl-6 Sl-220 Sl-220A Sl-5 Sl-23K Sl-B35 Sl-D5 Sl-D35 Sl-Q5 Sl-Q6 Sl-Q202 Sl-Q202 Sl-Dl5 Sl-H301 Etc..
Features
- We ground Wire for Technics Black Turntable, Designed for a turntable ground connection that has NO metal pin in the center of the receptacle. Fits Most Technics Vinyl Phonograph.
- Stop 'hum hum' Compatible with Technics Turntable SL-BD21 SL-BD3 SL-QL5 SL-6 SL-220 SL-220A SL-5 SL-23K SL-B35 SL-D5 SL-D35 SL-Q5 SL-Q6 SL-Q202 SL-Q202 SL-DL5 SL-H301 etc.
- We ground Wire replacement part is manufactured with ultra-flexible Power-Flex Cable. The wire has low resistance and high conductivity, corrosion resistant, Turntable ground connector is soldered to wire.
- We black Turntable ground wire has a 'U' lug at one end that can slip under a metal ground/chassis screw on your receiver / amplifier / pre-amplifier or computer and the other end has round plug that goes into the GND receptacle on the back of your turntable, Better than Technics original.
- 5-ft (60 inch) long, 18 AWG flexible multi-strand copper wire for easy installation, please make sure your Technics Black Turntable grounding hole is a female sockets. 36 Month Manufacturer Warranty- 100% Satisfaction Guarantee.
- See more on Amazon...
Brand: KOMITASUI | Manufacturer: Komitasui
See On Amazon #7
Pfanstiehl Turntable Ground Wire for LP Vinyl Magnetic Cartridge Turntables, 6-ft Long
Asin: B074ZQ165W | Model: PGW | PartNumber: PGW | Ean: 0038975040844 | UPC: 038975040844
Attaches To The Grounding Lug On The Turntable And Connects To The Grounding Lug Or Chassis Screw On The Receiver / Amplifier Or Pre-Amplifier..
6-Ft Wire Has Spade Lugs On Each End For Easy Installation..
For Magnetic Cartridge Turntables Such As Technics..
Features
- No more hum - Eliminates hum and static electricity.
- For magnetic cartridge turntables such as Technics.
- Attaches to the grounding lug on the turntable and connects to the grounding lug or chassis screw on the receiver / amplifier or pre-amplifier.
- 6-ft wire has spade lugs on each end for easy installation.
- See more on Amazon...
Brand: TacParts | Manufacturer: LKG Industries
See On Amazon #8
Sam&Johnny Phonograph Turntable Ground Wire for Technics Magnetic Cartridge Turntables SL-BD10, BD20, BD22, BD35,SL-QD33,SL-QD22, Silicone Soft Grounding Wire Cable(5-ft)
Asin: B0BWYXCKV8 | Model: SJ-09008 | PartNumber: SJ-09008 | Ean: 0605182766555 | UPC: 605182766555
✅Use This Plug-In Ground Wire Following Models: For Technics Sl-B92, Sl-B280, Sl-Bd1, Sl-Bd10, Sl-Bd20d, Sl-Bd200, Sl-Bd22, Sl-Bd22d, Sl-Bd35, Sl-Bd3, Sl-D33, Sl-Dd20, Sl-Dd200, Sl-Dd33, Sl-J11, Sl-J300, Sl-J33, Sl-L2, Sl-L20, Sl-L24, Sl-L25, Sl-L26 Etc..
✅1 X 5-Ft Ground Wire Cable. The Replacement Part Is Made From Durable High Quality Material And Well-Tested By The Manufacturer.There Are Three Different Wires Used On The Technics Turntables, So Please Make Sure Your Model Is Listed Below Before Ordering..
✅Perfect Phonograph Grouding Wire, Used It For The Turntable/Preamp/Power Amplifier/Receiver Had A Ground Screw, Turntables Ground Wire Has A 'Spade' Lug Slip Under The "Gnd" Receptacle On Of Your Turntables / Receiver / Amplifier / Vacuum Tubes Amplifier, And The Other End Has A Special Roud Plug That Goes Into The "Gnd" Jack On The Back Of Your Turntable..
✅Phonograph Turntable Ground Wire, 5Ft 18 Awg Flexible Multi-Strand Copper Wire, Manufactured With Ultra-Flexible Power-Flex Cable Has Low Resistance And High Conductivity, Corrosion Resistant, Small Loss, Better Than Original Ground Wire..
Features
- Compatible for Technics Black Turntable Silicone Soft Grounding Wire Cable(5-ft). STOPS hum, Phonograph Turntable Ground Wire Connect the two devices to achieve voltage balance, Ensures optimal sound quality, Protects your equipment from damage.
- Phonograph Turntable Ground Wire, 5ft 18 AWG flexible multi-strand copper wire, manufactured with ultra-flexible Power-Flex Cable has low resistance and high conductivity, Corrosion resistant, small loss, Better than original Ground Wire.
- Use this Plug-in ground Wire following models: for Technics SL-B92, SL-B280, SL-BD1, SL-BD10, SL-BD20D, SL-BD200, SL-BD22, SL-BD22D, SL-BD35, SL-BD3, SL-D33, SL-DD20, SL-DD200, SL-DD33, SL-J11, SL-J300, SL-J33, SL-L2, SL-L20, SL-L24, SL-L25, SL-L26 etc.
- Perfect phonograph grouding wire, Used it for the turntable/preamp/power amplifier/receiver had a ground screw, turntables ground wire has a 'spade' lug slip under the GND receptacle on of your turntables / receiver / amplifier / Vacuum Tubes amplifier, and the other end has a special roud plug that goes into the GND jack on the back of your turntable.
- 1 x 5-ft ground Wire Cable. The replacement part is made from durable high quality material and well-tested by the manufacturer.There are three different wires used on the Technics turntables, So please make sure your model is listed below before ordering.
- See more on Amazon...
Brand: Sam&Johnny | Manufacturer: Sam&Johnny
Warranty: 1 years
See On Amazon #9
KOMITASUI Phonograph Turntable Ground Wire for Technics SL-BD10, BD20, BD22, BD35 SL-L26, SL-QD22 Plug-in Phono Cable, Silicone Soft Ground Cable(5-ft)
Asin: B0BXT3F4SJ | Model: KMT-5668 | PartNumber: KMT-5668 | Ean: 0605182766616 | UPC: 605182766616
Better Than Technics Original. We Plug-In Ground Wire Silicone Soft Ground Wire. Phono Cable Has Low Resistance And High Conductivity, Corrosion Resistant, Low Resistance, 'Spade' Lug Copper Cold-Pressed Terminals And Tuning Fork Inserted Into Female Sockets, Very Strong Contact, Easy Installation..
1 X 5Ft(60Incl) Phonograph Turntable Ground Wire,12 Month Manufacturer Warranty- 100% Satisfaction Guarantee..
We Ground Wire Has A 'Spade' Lug At One End That Can Slip Under A Metal Ground/Chassis Screw On Your Amp/Receiver Or Computer And The Other End Has A Special Roud Plug That Goes Into The "Gnd" Jack On The Back Of Your Turntable..
Stop That Annoying Hum From Your Technics Turntable/Amp/Receiver By Installing This Ground Wire. Compatible For Sl-Bd3, Sl-D33, Sl-Dd20, Sl-Dd33, Sl-J11, Sl-J300, Sl-J33, Sl-L2, Sl-L20, Sl-L24, Sl-L25, Sl-L26, Sl-Qd22, Sl-Qd33, Sl-Qd35, Sl-Dd22, Sl-B92, Sl-B280, Sl-Bd1, Sl-Bd10, Sl-Bd20d, Sl-Bd22, Sl-Bd22d, Sl-Bd35 Etc..
Features
- Phonograph Turntable Ground Wire Connect two devices to achieve voltage balance and Eliminates annoying hum, Ensures optimal sound quality, Protects your equipment from damage.
- STOP that annoying hum from your Technics turntable/amp/receiver by installing this ground wire. Compatible for SL-BD3, SL-D33, SL-DD20, SL-DD33, SL-J11, SL-J300, SL-J33, SL-L2, SL-L20, SL-L24, SL-L25, SL-L26, SL-QD22, SL-QD33, SL-QD35, SL-DD22, SL-B92, SL-B280, SL-BD1, SL-BD10, SL-BD20D, SL-BD22, SL-BD22D, SL-BD35 etc.
- Better than Technics original. We Plug-in ground Wire Silicone Soft Ground Wire. Phono cable has low resistance and high conductivity, corrosion resistant, low resistance, 'spade' lug copper cold-pressed Terminals and Tuning fork inserted into female sockets, Very strong contact, easy installation.
- We ground wire has a 'spade' lug at one end that can slip under a metal ground/chassis screw on your amp/receiver or computer and the other end has a special roud plug that goes into the GND jack on the back of your turntable.
- 1 x 5ft(60incl) Phonograph Turntable Ground Wire,12 Month Manufacturer Warranty- 100% Satisfaction Guarantee.
- See more on Amazon...
Brand: KOMITASUI | Manufacturer: KOMITASUI
Dimensions: 1.10 x 2.90 x 2.45 Inches
Warranty: 3 Years
See On Amazon
Looking For Something Else?
Search