uxcell Spiral Flute Taps, 5/16-24 UNF 2B High Speed Steel (HSS) Uncoated Machine Thread Milling Threading Screw Tap 3 Flutes Tapping Tool
Asin: B09Z6SR57D | Model: a22022400ux0716 | PartNumber: a22022400ux0716
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Wide Applications: Suitable For Processing Blind Holes And Sticky Materials. For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min. The Torque Caused By Too Fast Feed Speed Is Too Large, Which Can Easily Cause The Tap To Break..
Tips: Taps Are Prone To Chipping Or Breaking Due To Speed Overload Or Non-Vertical Tapping. Use The Correct Tapping Tools, Such As Tapping Wrench, Tapping Machine. Micro Taps Are Mainly Used In Clocks And Watches, As Well As For Making Holes In Wood And Soft Metals With Lower Hardness..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
High-Speed Steel Tool: High Speed Steel Tool Has High Hardness And Toughness, Heat Resistance And Wear Resistance. Features The Base Substrate Without Any Coatings. Fit For Most General Purpose Thread Tapping..
Features
- Spiral Flute Taps: Thread Size: 5/16-24 UNF; Tolerance Grade: 2B; Square End Size: 5mm / 0.2". Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
- High-speed steel tool: High speed steel tool has high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Fit for most general purpose thread tapping.
- Wide Applications: Suitable for processing blind holes and sticky materials. For drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- Tips: Taps are prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping tools, such as tapping wrench, tapping machine. Micro taps are mainly used in clocks and watches, as well as for making holes in wood and soft metals with lower hardness.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon Similar To uxcell Spiral Flute Taps 5
#1
uxcell M3 x 0.5 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Shank with Square End, H2 Tolerance, 2pcs
Asin: B097666SK2 | Model: a20010400ux0067 | PartNumber: a20010400ux0067
Applications: Suitable For Processing Blind Holes And Sticky Materials. Great For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Is Easy To Cause Damage To The Tap Due To Uneven Force..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Material And Finish: High-Speed Steel Tool Is With High Hardness And Toughness For Wear Resistance, Good For General Purpose Applications. Features Nitriding Coated Surface For Rust Prevention And Long Service Life..
Features
- Tap Size: M3 x 0.5 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life.
- Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #2
uxcell Metric Machine Tap M12 x 1.5mm H2 High Speed Steel 4 Straight Flutes Screw Tapping Threading Machinist Repair DIY Tool
Asin: B07KSYQZVS | Model: a18102400ux0299 | PartNumber: a18102400ux0299
Suitable For Processing Through Holes Or Shallow Holes On Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Design, Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Good For Processing Through Holes Or Shallow Holes.
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, And Fit A Wide Range Of Applications..
Features
- Thread Size: M12 x 1.5mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
- The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
- Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Good for processing through holes or shallow holes
- Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.54 x 0.39 inches
See On Amazon #3
uxcell Spiral Point Plug Threading Tap M6 x 1 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Metric Screw Taps Tapping Bit for Thread Repair, 2pcs
Asin: B07Z9QNZN6 | Model: a19091100ux0218 | PartNumber: a19091100ux0218
Applications: Thread Taps Are Great For Through-Hole Threads. Can Be Used For Drilling And Tapping Stainless Steel, Aluminum, Alloy Steel, Ordinary Steel, Cast Iron, Non-Ferrous Metals, Hard Plastics, Etc. Flutes On The Screw Tap Help To Remove Chips And Debris From The Hole..
Warm Tips: Machine Taps Are Suggested To Be Used With Tap Chucks With Overload Protection. It Is Not Recommended For Hand Use And Electric Drill Tapping. Micro Taps (Such As M1-M3.5) Are Mainly Used For Clocks, Watches, Low-Hardness Woods, And Soft Metals..
How To Use: Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines. Used With Tapping Oil To Get Higher Quality Threads And More Durable Taps. The Point Of The Tap Helps Guide It Into The Hole And Reduces The Torque Required To Turn It..
Material & Finish: 6542 High Speed Steel Metric Taps Run At High Speeds And Generate Threads Quickly And Efficiently, Offering High Hardness (Hrc62-64), Wear Resistance, And Good Toughness. Titanium Coating For Improving Wear Resistance, Hardness, Heat Resistance, Lubricity..
Features
- Spiral Point Tap: Thread size: M6 x 1; thread tolerance: H2; thread length: 23mm / 0.9"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide provide downward chip removal, with clear threads and sharp cutting edges.
- Material & Finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. Titanium coating for improving wear resistance, hardness, heat resistance, lubricity.
- Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
- How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
- Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell Metric Machine Tap M8 x 1.25 H2 High Speed Steel 3 Straight Flutes Screw Tapping Threading Machinist Repair DIY Tool 2pcs
Asin: B07KT3LJKD | Model: a18102400ux0271 | PartNumber: a18102400ux0271
Suitable For Processing Through Holes Or Shallow Holes On Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Design, Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Good For Processing Through Holes Or Shallow Holes.
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, And Fit A Wide Range Of Applications..
Features
- Thread Size: M8 x 1.25. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
- The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
- Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Good for processing through holes or shallow holes
- Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 5.51 x 3.54 Inches | Weight: 0.00 Pounds
See On Amazon #5
uxcell M5 x 0.8 Straight Flute Thread Tap and 4.2mm Twist Drill Bit Set, Metric Titanium Plated 6542 High Speed Steel Machine Screw Thread Tap Threading Drilling Tool
Asin: B09TVJ2BB5 | Model: a22010500ux0472 | PartNumber: a22010500ux0472
Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Titanium Coating Provides Excellent Corrosion Resistance And Improves Wear Resistance..
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Straight Flute Tap: Straight Flute Design, Downward Chip Removal. Right Hand Thread Cutting, Fast Tapping With Accuracy. Suitable For Processing Through Holes. For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics.
Features
- Tap and Drill Bit: Tap thread size: M5 x 0.8, drill bit diameter: 4.2mm / 0.17". High-speed steel tool has high hardness and toughness for wear resistance.
- Straight Flute Tap: Straight flute design, downward chip removal. Right hand thread cutting, fast tapping with accuracy. Suitable for processing through holes. For drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics
- Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Titanium coating provides excellent corrosion resistance and improves wear resistance.
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #6
uxcell Metric Machine Tap M3 x 0.5mm H2 High Speed Steel 3 Straight Flutes Screw Tapping Threading Machinist Repair DIY Tool 2pcs
Asin: B07KT1VM7G | Model: a18102400ux0267 | PartNumber: a18102400ux0267
Suitable For Processing Through Holes Or Shallow Holes On Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Standard Metric Thread Design, Clear And Tidy, Provide Rapid Chip Removal For Efficient Threading. Straight Flute Design, Right Hand Tapping Direction. The Mini Metric Taps Are Mainly Used For Clocks, Watches, Low Hardness Wood And Soft Metal Hole Processing..
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, And Fit A Wide Range Of Applications..
Features
- Thread Size: M3 x 0.5mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
- The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
- Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading. Straight flute design, right hand tapping direction. The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing.
- Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.72 x 1.97 Inches
See On Amazon #7
uxcell M3 x 0.5 Spiral Point Thread Tap and 2.5mm Drill Bit Set, Metric Titanium Plated Cobalt High Speed Steel Machine Screw Thread Tap Threading Tool
Asin: B09TVGPS96 | Model: a22010500ux0490 | PartNumber: a22010500ux0490
Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Cobalt High Speed Steel Tool Features High Hardness (Hrc65-66) And High Red Hardness, High Wear Resistance.
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Spiral Point Tap: Spiral Point Design, Downward Chip Removal, Right Hand Thread Cutting. Suitable For Processing Through-Hole Threads, And Tapping Aluminum, Stainless Steel, Bronze, Hard Plastics. Titanium Coating Provides Excellent Corrosion Resistance And Wear Resistance..
Features
- Tap and Drill Bit: Tap thread size: M3 x 0.5, drill bit diameter: 2.5mm / 0.1". High-speed steel tool has high hardness and toughness for wear resistance. Good for general purpose applications.
- Spiral Point Tap: Spiral point design, downward chip removal, right hand thread cutting. Suitable for processing through-hole threads, and tapping aluminum, stainless steel, bronze, hard plastics. Titanium coating provides excellent corrosion resistance and wear resistance.
- Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell Metric Machine Tap M10 x 1.25mm H2 High Speed Steel 3 Straight Flutes Screw Tapping Threading Machinist Repair DIY Tool
Asin: B07KSWJYN1 | Model: a18102400ux0296 | PartNumber: a18102400ux0296
Suitable For Processing Through Holes Or Shallow Holes On Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Design, Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Good For Processing Through Holes Or Shallow Holes.
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, And Fit A Wide Range Of Applications..
Features
- Thread Size: M10 x 1.25mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
- The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
- Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Good for processing through holes or shallow holes
- Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.54 x 0.39 Inches | Weight: 0.00 Pounds
See On Amazon #9
uxcell M2 x 0.4 Spiral Point Thread Tap and 1.6mm Drill Bit Set, Metric Titanium Plated Cobalt High Speed Steel Machine Screw Thread Tap Threading Tool
Asin: B09TW2W5X8 | Model: a22010500ux0488 | PartNumber: a22010500ux0488
Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Cobalt High Speed Steel Tool Features High Hardness (Hrc65-66) And High Red Hardness, High Wear Resistance.
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Spiral Point Tap: Spiral Point Design, Downward Chip Removal, Right Hand Thread Cutting. Suitable For Processing Through-Hole Threads, And Tapping Aluminum, Stainless Steel, Bronze, Hard Plastics. Titanium Coating Provides Excellent Corrosion Resistance And Wear Resistance..
Features
- Tap and Drill Bit: Tap thread size: M2 x 0.4, drill bit diameter: 1.6mm / 0.06". High-speed steel tool has high hardness and toughness for wear resistance. Good for general purpose applications.
- Spiral Point Tap: Spiral point design, downward chip removal, right hand thread cutting. Suitable for processing through-hole threads, and tapping aluminum, stainless steel, bronze, hard plastics. Titanium coating provides excellent corrosion resistance and wear resistance.
- Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell M4 x 0.7 Spiral Point Thread Tap and 3.3mm Twist Drill Bit Set, Metric Titanium Plated 6542 High Speed Steel Machine Screw Thread Tap Threading Tool
Asin: B09TYT39LY | Model: a22010500ux0512 | PartNumber: a22010500ux0512
Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches.Titanium Coating Provides Excellent Corrosion Resistance And Wear Resistance..
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Spiral Point Tap: Spiral Point Flute Design, Downward Chip Removal, Right Hand Thread Cutting, Fast Tapping With Accuracy. Suitable For Processing Through-Hole Threads. For Fast Tapping In Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics..
Features
- Tap and Drill Bit: Tap thread size: M4 x 0.7, drill bit diameter: 3.3mm / 0.13". High-speed steel tool has high hardness and toughness for wear resistance. Good for general purpose applications.
- Spiral Point Tap: Spiral point flute design, downward chip removal, right hand thread cutting, fast tapping with accuracy. Suitable for processing through-hole threads. For fast tapping in aluminum, die steel, stainless steel, bronze, hard plastics.
- Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.Titanium coating provides excellent corrosion resistance and wear resistance.
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #11
uxcell Metric Hand Tap M5 Thread 0.8 Pitch 3 Straight Flutes H2 Alloy Tool Steel Bottom & Taper Screw Tap Set Tapping Tools for Repairing 2 Pairs
Asin: B07W71T3PK | Model: a19051000ux0721 | PartNumber: a19051000ux0721
Wide Applications: The Thread Tap Kit Is Used To Re-Thread Damaged Or Jammed Threads. Suitable For Tapping Through Or Shallow Holes In Mild Steels, Aluminum, Iron, Copper, Hard Plastic..
9Sicr Steel Taps: 9Sicr Steel Is A Commonly Used Low Alloy Tool Steel With High Hardening Capacity, High Wear Resistance And Low Speed Cutting. The Reddish-Brown Coating On The Tap Belongs To The Normal Processing Process, Not Rusting..
Hand Taps: Mainly For Hand Use, Used With Tap Wrenches. Straight Flute Tap Provides Fast Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Universal Square Shank..
Tap Set: Taper Style: Starts The Thread Square With The Workpiece. Bottoming Tap: Generate Threads To The Bottom Of Holes. Add Appropriate Tapping Oil For Higher Quality Threads And More Durable Screw Taps..
Features
- Metric Taps: Thread Size: M5; Pitch: 0.8; Shank Side Width: 4mm / 0.16 inch; Thread Length: 19mm / 0.75 inch; Total Length: 54mm / 2.13 inch
- Tap Set: Taper Style: Starts the thread square with the workpiece. Bottoming Tap: Generate threads to the bottom of holes. Add appropriate tapping oil for higher quality threads and more durable screw taps.
- Wide Applications: The thread tap kit is used to re-thread damaged or jammed threads. Suitable for tapping through or shallow holes in mild steels, aluminum, iron, copper, hard plastic.
- Hand Taps: Mainly for hand use, used with tap wrenches. Straight flute tap provides fast downward chip removal for efficient threading, clear threads without burrs, universal square shank.
- 9SiCr Steel Taps: 9SiCr steel is a commonly used low alloy tool steel with high hardening capacity, high wear resistance and low speed cutting. The reddish-brown coating on the tap belongs to the normal processing process, not rusting.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #12
uxcell Thread Milling Taps, 3/8-16 UNC High Speed Steel (HSS) 3 Straight Flutes Machine Screw Thread Threading Tap, 5" Length (Extra Long)
Asin: B0B6RC9L6Y | Model: a22051600ux0142 | PartNumber: a22051600ux0142
Applications: Suitable For Processing Through Holes Or Shallow Blind Holes . Used For Drilling And Tapping Aluminum, Stainless Steel, Copper, Hard Plastics, Etc.. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Or Electric Drills Use Is Not Recommended. Please Add Coolant When Tapping And Apply Anti-Rust Oil For Maintenance After Use To Prolong The Service Life..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
High Speed Steel: High Speed Steel Tool Has High Hardness And Toughness, Wear Resistance, Heat Resistance. Features Just The Base Substrate Without Any Coatings, Good For General Purpose Thread Tapping..
Features
- Tap Size: Thread size: 3/8-16 UNC; total length: 130mm / 5" (approx.); accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
- High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping.
- Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell Machine Tap 2-56 UNC Thread 2A High Speed Steel Screw Taps Threading Tapping Tool
Asin: B07Y4YHDTF | Model: a19081500ux0004 | PartNumber: a19081500ux0004
Wide Applications: The Thread Tap Is Suitable For Drilling Mild Steels, Aluminum, Iron, Copper, Stainless Steel, Hard Plastic, Processing Through Holes Or Shallow Holes. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps: Used In Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Tap: Straight 3 Flutes Are Ground To Provide Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
High Speed Steel Tap: The Screw Tap Has High Wear Resistance, Fast Cutting Speed, High Strength And Hardness, And Long Service Life. With Uncoated Base Substrate Only, Suitable For General Purpose Tapping..
Features
- Thread Tap: Thread Size: 2-56 UNC; Class: 2A; Thread Length: 13mm / 0.51 inch; Total Length: 42mm / 1.65 inch
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell M6 x 1 Spiral Point Thread Tap and 5.0mm Twist Drill Bit Set, Metric Titanium Plated 6542 High Speed Steel Machine Screw Thread Tap Threading Tool
Asin: B09TYS683J | Model: a22010500ux0514 | PartNumber: a22010500ux0514
Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches.Titanium Coating Provides Excellent Corrosion Resistance And Wear Resistance..
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Spiral Point Tap: Spiral Point Flute Design, Downward Chip Removal, Right Hand Thread Cutting, Fast Tapping With Accuracy. Suitable For Processing Through-Hole Threads. For Fast Tapping In Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics..
Features
- Tap and Drill Bit: Tap thread size: M6 x 1, drill bit diameter: 5mm / 0.2". High-speed steel tool has high hardness and toughness for wear resistance. Good for general purpose applications.
- Spiral Point Tap: Spiral point flute design, downward chip removal, right hand thread cutting, fast tapping with accuracy. Suitable for processing through-hole threads. For fast tapping in aluminum, die steel, stainless steel, bronze, hard plastics.
- Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.Titanium coating provides excellent corrosion resistance and wear resistance.
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #15
uxcell Reduced Shank Twist Drill Bits 14.5mm High Speed Steel 4341 with 10mm (3/8") Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D9DNVY | Model: a19102500ux0064 | PartNumber: a19102500ux0064
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes. Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Chucking Maximizing Security For Precise Holes..
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance. High Cutting Edge Strength, Fast Cutting Speed..
Features
- Features: Cutting Edge Diameter : 14.5mm / 0.57"; Shank Diameter : 10mm / 3/8"; Cutting Edge Length: 52mm / 2.05"; Total Length : 150mm / 6.0"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. High cutting edge strength, fast cutting speed.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Sharp and spiral cutting edge provides neat and smooth cuts.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Tri-flat on the shank of drills are constructed for tighter chucking maximizing security for precise holes.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell 5 Pairs Metric Hand Threading Tap Set M3 Thread 0.5mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel
Asin: B07WHWBTLJ | Model: a19070800ux0124 | PartNumber: a19070800ux0124
Easy To Use: Hand Tapping, Mainly Used With Tap Wrenches. Standard Thread Milling Taps Are Used To Thread Through Holes Or Shallow And Blind Holes..
Tips: Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps. Without Any Additional Coatings, Good For General Purpose Applications..
Features: Straight Flute Design, Downward Chip Removal. High Speed Steel Tool Is High Hardness, High Strength, Good Toughness, And Wear Resistance..
Applications: The Hand Threading Tap Kit Is Used To Re-Thread Damaged Or Jammed Threads. Suitable For Threading Mild Steels, Aluminum, Iron, Copper, Hard Plastic..
Features
- Metric Taps: M3 x 0.5 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes.
- Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic.
- Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes.
- Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance.
- Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell Machine Tap #6-32 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs
Asin: B07VCSVLJD | Model: a19050800ux0926 | PartNumber: a19050800ux0926
Wide Applications: The Thread Tap Is Suitable For Drilling Mild Steels, Aluminum, Iron, Copper, Stainless Steel, Hard Plastic, Processing Through Holes Or Shallow Holes. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps: Used In Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Tap: Straight 3 Flutes Are Ground To Provide Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
High Speed Steel Tap: The Screw Tap Has High Wear Resistance, Fast Cutting Speed, High Strength And Hardness, And Long Service Life. With Uncoated Base Substrate Only, Suitable For General Purpose Tapping..
Features
- Thread Tap: Thread Size: #6-32 UNC; Class: 2B; Thread Length: 20mm / 0.8 inch; Shank Side Width: 3mm / 0.12 inch; Total Length: 54mm / 2.13 inch
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell Thread Milling Taps, 1/4-20 UNC High Speed Steel (HSS) 3 Straight Flutes Machine Screw Thread Threading Tap, 4" Length (Extra Long)
Asin: B0B6RDG93X | Model: a22051600ux0138 | PartNumber: a22051600ux0138
Applications: Suitable For Processing Through Holes Or Shallow Blind Holes . Used For Drilling And Tapping Aluminum, Stainless Steel, Copper, Hard Plastics, Etc.. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Or Electric Drills Use Is Not Recommended. Please Add Coolant When Tapping And Apply Anti-Rust Oil For Maintenance After Use To Prolong The Service Life..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
High Speed Steel: High Speed Steel Tool Has High Hardness And Toughness, Wear Resistance, Heat Resistance. Features Just The Base Substrate Without Any Coatings, Good For General Purpose Thread Tapping..
Features
- Tap Size: Thread size: 1/4-20 UNC; total length: 100mm / 4" (approx.); accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
- High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping.
- Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell Spiral Point Plug Threading Tap UNC 1/4-20 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs
Asin: B07Z9RNX51 | Model: a19091100ux0235 | PartNumber: a19091100ux0235
Applications: Great For Through-Hole Threads. Can Be Used For Drilling And Tapping Stainless Steel (Below 30Hrc), Aluminum, Die Steel, Ordinary Steel, Non-Ferrous Metals, Hard Plastics, Etc..
Warm Tips: Machine Taps Are Suggested To Be Used With Tap Chucks With Overload Protection. It Is Not Recommended For Hand Use And Electric Drill Tapping.
How To Use: Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines. Used With Tapping Oil To Get Higher Quality Threads And More Durable Taps.
Material & Finish: High-Speed Steel Tool Is Great For General Purpose Applications, Offering High Hardness And Toughness. Titanium Coating For Improving Wear And Fusion Resistance, Long Service Life.
Features
- Specifications: Thread size: UNC 1/4-20; thread tolerance: H2; thread length: 23mm / 0.9"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal
- Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life
- Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
- How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps
- Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #20
uxcell Machine Tap, 1/4-18 NPS Pipe Tap 4 Straight Flutes High Speed Steel Screw Thread Threading Tapping Tool
Asin: B07VDSWY2B | Model: a19051000ux0712 | PartNumber: a19051000ux0712
Wide Applications: The Thread Tap Is Suitable For Drilling Mild Steels, Aluminum, Iron, Copper, Stainless Steel, Hard Plastic, Processing Through Holes Or Shallow Holes. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps: Used In Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Tap: Straight 4 Flutes Are Ground To Provide Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
High Speed Steel Tap: The Screw Tap Has High Wear Resistance, Fast Cutting Speed, High Strength And Hardness, And Long Service Life. With Uncoated Base Substrate Only, Suitable For General Purpose Tapping..
Features
- Pipe Thread Tap: Thread Size: 1/4-18 NPS; Thread Length: 30mm / 1.18 inch; Shank Side Width: 8.8mm / 0.35 inch; Total Length: 94mm / 3.7 inch
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight Flute Tap: Straight 4 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search