HSS 12-32 UNEF Tap & 12-32 UNEF Die Right Hand
Asin: B0B1C8968R
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: SUPER BIG LOOT BINGO | Manufacturer: SUPER BIG LOOT BINGO
See On Amazon Similar To HSS 1232 UNEF Tap
#1
AUTOTOOLHOME 6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC
Asin: B088T7LP2C | Model: 02426001 | PartNumber: 02426001
This Tap Set Includes Sae , So It Has High Versatility. Each Tap Drill Is Engraved With A Label, Which Is Convenient For You To Choose The Size That Suits You. The Convenient ¼-Inch (6.35Mm) Quick Change Hex Shank Has A Tapered End To Prevent Excessive Knocks. Back Taper Exceeds The Tap To Prevent Over-Drilling And Damage To The Thread..
Storage Case Is Lightweight And Durable For Easy Storage And Is Portable For All Job Environments.
6Pcs Drill Tap Set Including Sae- 6-32Nc, 8-32Nc, 10-24Nc, 10-32Nc, 12-24Nc, 1/4-20Nc.
Three In One Operation Provides Hole Drilling, Tapping, Deburring And Countersinking For A Quick And Complete Job On Copper, Brass, Aluminum, Sheet Metal And Plastic.
Features
- Titanium Combination Drill taps are made of HSS 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life.
- Three in one operation provides hole drilling, tapping, deburring and countersinking for a quick and complete job on copper, brass, aluminum, sheet metal and plastic
- This tap set includes SAE , so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient -inch (6.35mm) quick change hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
- 6pcs drill tap set including SAE- 6-32nc, 8-32nc, 10-24nc, 10-32nc, 12-24nc, 1/4-20nc
- Storage case is lightweight and durable for easy storage and is portable for all job environments
- See more on Amazon...
Brand: AUTOTOOLHOME | Manufacturer: JYC International Trade Co., Ltd.
Weight: 0.00 Pounds
See On Amazon #2
BOSCH BDT1032 10-32 Plug Tap and No. 21 Drill Bit Combo Set
Asin: B0849GHJPF | Model: BDT1032 | PartNumber: BDT1032 | Ean: 0000346622201 | UPC: 000346622201
Included Drill Bit – Is Matched To Tap For Correct Size, With A No-Skate Tip For Accurate Hole Starts.
Rolled Tap Threads – Deliver More Accuracy And Are Cleaner Than Machined Threads.
Heat-Treated Carbon Steel Tap – Provides Superior Durability And Speed.
Plug Taps – Engineered For Cutting Right-Hand Internal Threads.
Features
- Tap and drill bit combo provides a secure method of drilling the proper hole size before cutting right-hand internal threads
- Plug taps engineered for cutting right-hand internal threads
- Included drill bit is matched to tap for correct size, with a no-skate tip for accurate hole starts
- Heat-treated carbon steel tap provides superior durability and speed
- Rolled tap threads deliver more accuracy and are cleaner than machined threads
- See more on Amazon...
Brand: BOSCH | Manufacturer: Bosch
Dimensions: 5.80 x 0.20 x 1.80 inches | Weight: 0.04 pounds
See On Amazon #3
BOSCH BDT632 6-32 Plug Tap and No. 36 Drill Bit Combo Set
Asin: B0849GNJ8W | Model: BDT632 | PartNumber: BDT632 | Ean: 0000346622171 | UPC: 000346622171
Included Drill Bit – Is Matched To Tap For Correct Size, With A No-Skate Tip For Accurate Hole Starts.
Rolled Tap Threads – Deliver More Accuracy And Are Cleaner Than Machined Threads.
Heat-Treated Carbon Steel Tap – Provides Superior Durability And Speed.
Plug Taps – Engineered For Cutting Right-Hand Internal Threads.
Features
- Tap and drill bit combo provides a secure method of drilling the proper hole size before cutting right-hand internal threads
- Plug taps engineered for cutting right-hand internal threads
- Included drill bit is matched to tap for correct size, with a no-skate tip for accurate hole starts
- Heat-treated carbon steel tap provides superior durability and speed
- Rolled tap threads deliver more accuracy and are cleaner than machined threads
- See more on Amazon...
Brand: BOSCH | Manufacturer: Bosch
See On Amazon #4
Drill America DWT57104 10-32 High Speed Steel 2 Flute Spiral Point Tap, DWT Series
Asin: B00BD5P0J2 | Model: DWT57104 | PartNumber: DWT57104 | Ean: 0887861075350 | UPC: 887861075350
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
See On Amazon #5
IRWIN Bottoming Tap, 12-1, 25mm (1842ZR)
Asin: B000FN6KO2 | Model: 1842ZR | PartNumber: 1842ZR | Ean: 0088020720313, 0024721053213 | UPC: 024721053213, 088020720313
Threading Taps.
Made In The United States.
Brand: IRWIN | Manufacturer: Newell Brands
Dimensions: 0.50 x 3.50 x 0.50 inches | Weight: 0.09 pounds
See On Amazon #6
AUTOTOOLHOME 6 Pack Combination Drill and Tap Bit Set 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Screw Tap Drill Bits for Drilling Tapping Countersinking
Asin: B016FMEZSO | Model: 00952 | PartNumber: 00952 | Ean: 0710185930855 | UPC: 710185930855
This Is A Sae Drill Tap Set, So It Has High Versatility. Each Tap Drill Is Engraved With A Label, Which Is Convenient For You To Choose The Size That Suits You. Quick Change ¼-Inch (6.35Mm) Hex Shank Has A Tapered End To Prevent Excessive Knocks. Back Taper Exceeds The Tap To Prevent Over-Drilling And Damage To The Thread..
Easy To Carry And Use,As The Drill Tap Bits Set Comes With A Portable Storage Case You Can Carry It Anywhere You Go. If You Encounter Any Problems Or Are Not Satisfied With The Products While Using Our Products, Please Feel Free To Contact Us..
Can Be Used To Tap Various Threads. Including 6 Sae Sizes: 6-32Nc, 8-32Nc, 10-24Nc, 10-32Nc, 12-24Nc, ¼-20Nc,1/4Inch Hex Quick Change Shank Fit Electric Hand Drill, Impact Drill, Bench Drill,Electric Screwdriver And Other Tap Machine.
Durable Taps Are Made From Hardened High-Speed Steel (Hss 4341) Vs Carbon Steel For Longer Life,Which Can Drill, Tap, Deburr And Counter Holes On Wood, Copper, Brass, Aluminum, Sheet Metal And Plastic.
Features
- The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy.
- Durable taps are made from hardened high-speed steel (HSS 4341) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic
- This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change -inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
- Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, -20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine
- Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us.
- See more on Amazon...
Brand: AUTOTOOLHOME | Manufacturer: JYC International Trade Co., Ltd.
Dimensions: 0.25 x 2.20 x 1.80 Inches | Weight: 0.18 Pounds
See On Amazon #7
ATOPLEE Metric Thread Tap,M12 HSS 6542 Right Hand Thread Tap (M12x1.25)
Asin: B01CHRFLN4 | Model: 13080030 | PartNumber: 13080030 | Ean: 0769700163605 | UPC: 769700163605
Square Head Size:6.8X 6.8Mm (L*W) ,Net Weight:0.045 Kg.
【Package Included】 1Pcs M12x1.25 Tap..
【Usage】When Using This Product For Tapping, It Can Be Used With Manual Equipment Or Special Processing Consoles, Such As Tapping Machines, Drill-In-One Bench Drills, Cnc Lathes, Machining Centers, Etc. With This Product, You Can Finish Tapping On Stainless Steel, Iron, Aluminum, Copper, General Steel And Other Materials..
【Size】Thread Diameter:12Mm,Total Length:88Mm ;Shank Diameter:9Mm, Pitch:1.25Mm；Thread Length：28Mm..
Features
- Material This thread tap is made of HSS 6542, which is stronger and more durable than ordinary taps.
- Size Thread Diameter:12mm,Total Length:88mm ;Shank Diameter:9mm, Pitch:1.25mm Thread Length 28mm.
- Square Head Size:6.8x 6.8mm (L*W) ,Net Weight:0.045 kg
- Usage When using this product for tapping, it can be used with manual equipment or special processing consoles, such as tapping machines, drill-in-one bench drills, CNC lathes, machining centers, etc. With this product, you can finish tapping on stainless steel, iron, aluminum, copper, general steel and other materials.
- Package Included 1pcs M12x1.25 Tap.
- See more on Amazon...
Brand: ATOPLEE | Manufacturer: ATOPLEE
Dimensions: 0.35 x 3.46 x 0.35 inches | Weight: 46.00 Grams
See On Amazon #8
BOSCH BPT12M125 12mm - 1.25 High-Carbon Steel Metric Plug Tap
Asin: B07GRJMS9C | Model: BPT12M125 | PartNumber: BPT12M125 | Ean: 0000346621075 | UPC: 000346621075
Rolled Threads – Deliver More Accuracy And Are Cleaner Than Machined Threads.
Package Dimensions:0.437"L X 1.5"W X 5.875"H.
Heat-Treated Carbon Steel – Provides Superior Durability And Speed.
Features
- Metric plug taps engineered for cutting right-hand internal metric threads, these taps are ideal for cutting internal threads in import cars, motorcycles and machinery
- Heat-treated carbon steel provides superior durability and speed
- Rolled threads deliver more accuracy and are cleaner than machined threads
- Package dimensions:0.437L x 1.5W x 5.875H
- See more on Amazon...
Brand: BOSCH | Manufacturer: C & J Direct GmbH & Co. KG
Dimensions: 5.88 x 0.44 x 1.50 inches | Weight: 0.10 Pounds
See On Amazon #9
Drill America DWT54358 #10-32 UNF High Speed Steel Bottoming Tap, (Pack of 1)
Asin: B00DL7CUPM | Model: DWT54358 | PartNumber: DWT54358 | Ean: 0887861070935 | UPC: 887861070935
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #10
6-pc 8-32NC Combination Drill Tap Bit Set SAE, 8-32NC Thread Size, Titanium Coated High-Speed Steel, Ideal for Drilling Threading and Countersinking in Soft Metal Wood and Plastic, 1/4 Hex Shank
Asin: B0CKTRR28F
Handy Tools – These Drill Tap Bits Are Must Have If You Fabricate A Lot; You Can Use The In Aluminum, Plastic, Steel, And So On; They're Sharp, And Easy To Use; Go Slow, Once The Tap Is Doing Its Thing, Make Sure Not To Strip The Threads By Bottoming It Out.
Worry-Free – This Drill Tap Bits Set Comes With A Portable Storage Case For Convenient Use And Store. If You Encounter Any Problems In Using The Products, Please Feel Free To Contact Us For Satisfactory Customer Service.
Easy To Use - Each Tap Drill Is Engraved With Its Size Convenient For You To Choose The Suitable Size With A Glance. A Tapered End On Hex Shank Can Prevent Excessive Knocks; Back Taper Exceeds The Tap To Prevent Over-Drilling And Damage To The Thread.
High Versatility – Set Of 6 Drill Tap Bits Sae Sizes，8-32Nc, With 1/4Inch Hex Quick-Change Shank, Fit Electric Hand Drill, Impact Drill, Bench Drill, Electric Screwdriver And Other Tap Machines.
Features
- COMBINATION DRILL & TAP & COUNTERSINK- No more using a drill to drill the hole and then tapping it out later with another tool. All in one and works great and save a lot of time and trouble
- HIGH VERSATILITY Set of 6 drill tap bits SAE sizes 8-32NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines
- HANDY TOOLS These drill tap bits are must have if you fabricate a lot; you can use the in aluminum, plastic, steel, and so on; They're sharp, and easy to use; Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out
- EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks; Back taper exceeds the tap to prevent over-drilling and damage to the thread
- WORRY-FREE This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service
- See more on Amazon...
Brand: DKIBBITH | Manufacturer: DKIBBITH
See On Amazon #11
Irwin Tools 1788671 IRWIN High Carbon Steel Bottom Tap 8-32nc Carded (1788671),
Asin: B0195UDMLO | Model: 1788671 | PartNumber: 1788671 | Ean: 0038548993706 | UPC: 038548993706
Item Package Dimension: 6.51" L X 6.0" W X 3.0" H.
Item Package Weight: 10.0 Lb.
Ideal For Maintenance And Repair Work.
Features
- Made of shock-resistant and heat treated S2 steel for maximum strength and hardness
- Ideal for maintenance and repair work
- Item Package Dimension: 6.51 L x 6.0 W x 3.0 H
- Item Package Weight: 10.0 lb
- See more on Amazon...
Brand: IRWIN | Manufacturer: IRWIN
Dimensions: 6.13 x 6.50 x 2.50 Inches | Weight: 0.00 pounds
See On Amazon #12
M12 x 1.25mm HSS Metric Tap And Die Set Thread Tap And Round Thread Die Right Hand HSS Taper Silver Tone (2Pcs)
Asin: B08RYHT23J | Model: CF2115-CF2133 | PartNumber: CF2115-CF2133 | Ean: 0711649717906 | UPC: 711649717906
Size: M12 X 1.25Mm, Pitch: 1.25Mm..
Application: Use For Carbon Steel, Alloy Steel And Cast Iron, Such As Through Hole Processing..
Package Contents: 1Pcs X Tap, 1Pcs X Die.
Materia: Hss(High Speed Steel).
Features
- Product Name: Tap and Die Set
- Materia: HSS(High Speed Steel)
- Size: M12 x 1.25mm, Pitch: 1.25mm.
- Package Contents: 1Pcs x Tap, 1Pcs x Die
- Application: Use for carbon steel, alloy steel and cast iron, such as through hole processing.
- See more on Amazon...
Manufacturer: SHENGQING
See On Amazon #13
Drill America #8-32 Carbon Steel Taper Tap (Pack of 1), DWT Series
Asin: B01EOD2EQG | Model: DWTT8-32 | PartNumber: DWTT8-32 | Ean: 0887861076937 | UPC: 887861076937
Carbon Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Straight Flute Tools Allow Chips To Collect In The Flutes As They Cut And Are Well Suited For Most Applications In Shallow Cuts.
Carbon Steel Hand Taps May Also Be Used To Thread Mild Steels.
Features
- Used to re-thread damaged and/or jammed threads
- Carbon Steel Hand Taps may also be used to thread mild steels
- Carbon steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #14
DEWALT DWADTQTR1032 Impact Ready 10-32 UNF Drill Tap, 1/4" Capacity
Asin: B01GWSYQ4E | Model: DWADTQTR1032 | PartNumber: DWADTQTR1032 | Ean: 0885911482738 | UPC: 885911482738
Up To 1/4" Thick Material Capacity.
Drill, Tap, And Countersink All In One Step.
Features
- Features a 1/4" hex shank for use in impact drivers
- Drill, tap, and countersink all in one step
- Up to 1/4 thick material capacity
- See more on Amazon...
Brand: DEWALT | Manufacturer: DEWALT
Dimensions: 1.87 x 0.25 x 5.75 inches | Weight: 0.02 Pounds
Warranty: 30 day money back guarantee
See On Amazon #15
IRWIN Drill And Tap Set, 8 - 32 NC Tap and No. 29 Drill Bit (80217)
Asin: B00004YOAW | Model: 80217 | PartNumber: 80217 | Ean: 0042526802171 | UPC: 042526802171
Drill Bit Constructed Of High Speed Steel For Fast And Precise Drilling.
Includes 1 Drill Bit And 1 Tap.
Tap Crafted Of High Carbon Steel For General Purpose Drilling.
Creates 32 Threads Per Inch.
Features
- Ideal for creating and threading fasteners holes in metal
- Creates 32 threads per inch
- Drill bit constructed of high speed steel for fast and precise drilling
- Tap crafted of high carbon steel for general purpose drilling
- Includes 1 drill bit and 1 tap
- See more on Amazon...
Brand: American Tool | Manufacturer: IRWIN
Dimensions: 0.30 x 5.60 x 1.20 Inches | Weight: 0.03 pounds
See On Amazon #16
TEMO 2 pc 10-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit
Asin: B079K5S3CW | Ean: 0718117677540 | UPC: 718117677540
Drill, Tap And Deburr In One Operation. Tapered Tap Design Prevents Thread Damage From Over-Drilling..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
One Piece Construction Guarantees Proper Drill For Tap Size. | 135 Self-Centering Split Point Tip. 10 Gauge (3.5Mm) Capacity. Usage Suggestions: Use Of Cutting Coil Recommended. Clean Tap Of Metal Chips To Extend Life. Reverse Drill To Back Out After Completing Tap..
Made Of High Speed M2 Steel. For Use With: Steel, Copper, Brass, Aluminum. Drill, Tap And Deburr In One Operation..
Features
- 2 pc 10-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit
- Made of high speed M2 steel. For use with: steel, copper, brass, aluminum. drill, tap and deburr in one operation.
- Drill, tap and deburr in one operation. Tapered tap design prevents thread damage from over-drilling.
- One piece construction guarantees proper drill for tap size. | 135 self-centering split point tip. 10 gauge (3.5mm) capacity. Usage suggestions: use of cutting coil recommended. clean tap of metal chips to extend life. reverse drill to back out after completing tap.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 0.25 x 3.50 x 4.00 inches | Weight: 1.00 ounces
See On Amazon #17
Irwin Tools Hanson 1765537 12-24/#16 Drill with Tap Combo
Asin: B00IOX7WL0 | Model: 1765537 | PartNumber: 1765537 | Ean: 0024721997395 | UPC: 024721997395
Package Quantity: 1.
Country Of Origin: United States.
Product Type: Drill Bits.
Features
- Package Dimensions: 2.032 cms (L) x 2.54 cms (W) x 0.254 cms (H)
- Product Type: Drill Bits
- Package Quantity: 1
- Country Of Origin: United States
- See more on Amazon...
Brand: IRWIN | Manufacturer: AMEX9
Dimensions: 5.70 x 0.30 x 1.60 inches | Weight: 0.01 Pounds
See On Amazon #18
Drill America - POUM12X1.75 m12 x 1.75 Tap and 10.25mm Drill Bit Kit, POU Series
Asin: B071L9VB71 | Model: POUM12X1.75 | PartNumber: POUM12X1.75 | Ean: 0887861290326 | UPC: 887861290326
Black Oxide Drill Bit Is Ideal For Production, Maintenance Or Portable Drilling Jobs.
Set Comes In Plastic Pouch.
M12 X 1.75 Hss Plug Tap And Matching 10.25Mm Hss Drill Bit In Plastic Pouch.
High Speed Steel Plug Hand Threading Tap Is Popular For Use In General Machine Tapping Or Cnc Tapping.
Features
- Set contains high speed steel plug hand tap and matching high speed steel drill bit
- High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping
- Black oxide drill bit is ideal for production, maintenance or portable drilling jobs
- M12 x 1.75 hss plug tap and matching 10.25Mm hss drill bit in plastic pouch
- Set comes in plastic pouch
- See more on Amazon...
First Available: 05/11/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #19
uxcell Machine Tap #8-32 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs
Asin: B07VBN2P48 | Model: a19050800ux0929 | PartNumber: a19050800ux0929
Wide Applications: The Thread Tap Is Suitable For Drilling Mild Steels, Aluminum, Iron, Copper, Stainless Steel, Hard Plastic, Processing Through Holes Or Shallow Holes. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps: Used In Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Tap: Straight 3 Flutes Are Ground To Provide Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
High Speed Steel Tap: The Screw Tap Has High Wear Resistance, Fast Cutting Speed, High Strength And Hardness, And Long Service Life. With Uncoated Base Substrate Only, Suitable For General Purpose Tapping..
Features
- Thread Tap: Thread Size: #8-32 UNC; Class: 2B; Thread Length: 20mm / 0.8 inch; Shank Side Width: 3mm / 0.12 inch; Total Length: 54mm / 2.13 inch
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell Metric Machine Tap M12 x 1.5mm H2 High Speed Steel 4 Straight Flutes Screw Tapping Threading Machinist Repair DIY Tool
Asin: B07KSYQZVS | Model: a18102400ux0299 | PartNumber: a18102400ux0299
Suitable For Processing Through Holes Or Shallow Holes On Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Design, Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Good For Processing Through Holes Or Shallow Holes.
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, And Fit A Wide Range Of Applications..
Features
- Thread Size: M12 x 1.5mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
- The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
- Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Good for processing through holes or shallow holes
- Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.54 x 0.39 inches
See On Amazon
Looking For Something Else?
Search