4pcs 3D Printer Fan 12V, 40mm 12 Volt Fan 0.08A DC Mini Quiet Cooling Fan 40X40X10mm Cable for 3D Printer, DVR and Other Small App liances Series Repair Replacement with 28cm
Asin: B0B1N6NSGM | Model: 0 | PartNumber: 0 | Ean: 0744348779975 | UPC: 744348779975
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Size: 40 Mm X 40 Mm X 10 Mm; Working Voltage: Dc 12V..
Working Current: 0.08A; Air Flow: 5.75±10% Cfm; Power: 0.96W; Cable Length: 280Mm..
Temperature Of Usage Environment: -10℃ To +70℃..
Bearing Is High Precision, Long Life And Low Noise..
Features
- Oil bearing 30000 hours; Certification: CE,UL,CUL.
- Bearing is high precision, long life and low noise.
- Size: 40 mm x 40 mm x 10 mm; Working Voltage: DC 12V.
- Temperature of usage environment: -10 to +70 .
- Working Current: 0.08A; Air Flow: 5.75 10% CFM; Power: 0.96w; Cable length: 280mm.
- See more on Amazon...
Brand: TAHULU | Manufacturer: TAHULU
Dimensions: 0.39 x 1.57 x 1.57 inches
See On Amazon Similar To 4pcs 3D Printer Fan 12V
#1
EUDAX 6 Set DC Motors Kit, Mini Electric Hobby Motor 3V -12V 25000 RPM Strong Magnetic with Shaft Propeller, 2 x AA Battery Holder,9V Battery Clip Connector,Plastic Wheels for DIY Science Projects
Asin: B08GPPJR1T
Dc Motors Color:Siler+Red;Voltage:Dc 3V-12V;No-Load Speed: 9000Rpm- 25000Rpm ±10%; Motor Body Diameter:27Mm/1.06";Shaft Size:10X2.0Mm/0.39"X0.08"(L*D);Motor Body Length;38Mm/1.46".
Package Including:6Pcs Dc Motor,6Pcs 9V Battery Clip Connector,6Pcs 2 X Aa Battery Holder,6Pcs Motor Mounting Bracket,6Pcs Boat Rocker Switches,12Pcs X Electronic Wire(25Cm),8Pcs Plastic Wheels，4Pcs 2*100Mm Shaft,4Pcs 4 Vanes Propeller,2Pcs 3 Vanes Propeller And 40Cmφ3 Heat Shrink Tube.
High Torque Strong Magnetic Brushed Electric 130 Motor, Can Be Used For Science Educational Models, Diy Stem Toys, Etc.. It Is Recommended To Use A 3V Battery Drive To Avoid High-Speed Operation Affecting The Motor Life..
Shaft Propeller Aperture:2Mm/0.078"; Diameter:60Mm/2.36"; Number Of Vane:4 Vane And 3 Vane;Colour:Red & Blue & Yellow&Green&Clear(Random Color).
Features
- Pay attention: Please read the instructions or pictures carefully, use the correct circuit diagram to avoid short circuit, short circuit will produce high temperature and Causing accessory damage
- Shaft Propeller Aperture:2mm/0.078; Diameter:60mm/2.36; Number of vane:4 vane and 3 vane;colour:Red & Blue & Yellow&Green&Clear(Random Color)
- DC Motors Color:Siler+Red;Voltage:DC 3V-12V;No-load speed: 9000RPM- 25000RPM 10%; Motor Body Diameter:27mm/1.06;Shaft Size:10x2.0mm/0.39x0.08(L*D);Motor Body Length;38mm/1.46
- High torque Strong magnetic Brushed Electric 130 MOTOR, can be used for Science Educational models, DIY STEM toys, etc.. It is recommended to use a 3V battery drive to avoid high-speed operation affecting the motor life.
- Package including:6pcs DC motor,6pcs 9V Battery Clip Connector,6pcs 2 x AA Battery Holder,6pcs motor mounting bracket,6pcs boat rocker switches,12pcs x electronic wire(25cm),8pcs Plastic wheels 4pcs 2*100mm shaft,4pcs 4 vanes propeller,2pcs 3 vanes propeller and 40cm 3 Heat shrink tube
- See more on Amazon...
Brand: EUDAX | Manufacturer: EUDAX
Weight: 0.37 pounds
See On Amazon #2
Creality Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3 / Ender 3 Pro 3D Printer
Asin: B07GXPJB25 | Model: CG-FS | PartNumber: CG-FS
Operation Voltage: Dc 24V.
Package Included: Dc 24V Extruder Hot End Fan And Dc 24V Turbo Fan.
Weight: 0.078Kg.
Materials: Plastic.
Features
- Fit for: Creality Ender 3, Ender 3X, Ender 3 Pro
- Materials: Plastic
- Operation Voltage: DC 24V
- Weight: 0.078KG
- Package included: DC 24V Extruder Hot End Fan and DC 24V Turbo fan
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.39 x 1.46 x 0.79 inches | Weight: 0.00 pounds
See On Amazon #3
4 Pack 40mm USB Brushless Cooling Fan 40mm x 10mm Fan High Performance DC 5V Cooling Fan Speed 4200 RPM Fan for Small Appliances Series Replacement
Asin: B07ZJ47Z2J | Model: 4010-5V | PartNumber: 4010-5V | Ean: 0701715431195 | UPC: 701715431195
❃❃ Bearing Type: Oil Bearing..
❃❃ Package Included: 4 * Dc Brushless Fans.(Notice: 'Do Not Get Wet' Or 'Put It In A Humid Environment'; Or It Will Stop Working. Any Questions, You Can Contact Us And We Will Help You.).
❃❃ Lead Wire: Usb; Length: Approx.1M / 39.37 In..
❃❃ Airflow: 3Cfm, Speed: 4200±5%Prm, Noise: 22 Dba..
Features
- Fan size: 40x40x10mm(L*W*H); Rated Voltage: 5V DC, Current: 0.21A.
- Airflow: 3CFM, Speed: 4200 5%PRM, Noise: 22 DBA.
- Bearing Type: Oil Bearing.
- Lead Wire: USB; Length: Approx.1m / 39.37 in.
- Package Included: 4 * DC brushless fans.(Notice: 'DO NOT GET WET' or 'Put it in a humid environment'; Or it will stop working. Any questions, you can contact us and we will help you.)
- See more on Amazon...
Brand: UMLIFE | Manufacturer: UMLIFE
Dimensions: 1.57 x 1.57 x 0.39 inches | Weight: 0.00 pounds
See On Amazon #4
MakerFocus 4pcs 3D Printer Fan 12V, 40mm 12 Volt Fan 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR and Other Small Appliances Series Repair Replacement
Asin: B07CH6YC32 | Model: 50IGRFWL2611N | PartNumber: 50IGRFWL2611N | Ean: 0192684015521 | UPC: 192684015521
Bearing Is High Precision, Long Life And Low Noise..
Working Current: 0.08A; Air Flow: 5.75±10% Cfm; Power: 0.96W; Cable Length: 280Mm..
Oil Bearing 30000 Hours; Certification: Ce,Ul,Cul..
Temperature Of Usage Environment: -10℃ To +70℃..
Features
- Size: 40 mm x 40 mm x 10 mm; Working Voltage: DC 12V.
- Temperature of usage environment: -10 to +70 .
- Bearing is high precision, long life and low noise.
- Oil bearing 30000 hours; Certification: CE,UL,CUL.
- Working Current: 0.08A; Air Flow: 5.75 10% CFM; Power: 0.96w; Cable length: 280mm.
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 0.39 x 1.57 x 1.57 inches | Weight: 0.13 pounds
See On Amazon #5
AEDIKO 4pcs DC 12V Relay Module 1 Channel Relay Board with Optocoupler Isolation Support High or Low Level
Asin: B095YFJ69T | Model: 14921 | PartNumber: 14921 | Ean: 0701715480605 | UPC: 701715480605
Optocoupler Isolation:1 Channel Relay Board Use Optocoupler Isolation That Has Strong Driving Ability And Stable Performance ,The Isolation Circuit Prevent Damages To I / O Port By Relay Switch Current.
Wide Application: Dc 12V Relay Module Works Well With Arm /Pic /Avr /Mcu/Raspberry/Cnc Machine/ Ps4 Etc..
Jumper Design: The Relay Module Has A Jumper That You Can Set Rather The Unit State Changes With High Or Low Signal. Has Screw Terminals For Relay (Nc,C,No) And For Input; Coil +, Coil - And Trigger..
Fault-Tolerant Design: Fault Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Operate;All Interfaces Of Relay Can Be Wired Out Through The Terminals Directly,Normally Open And Normally Closed.
Features
- 12V Relay Module: Working Voltage: DC 12V; Maximum Load: AC 250V/10A, DC 30V/10A; Trigger Current of Opto-Isolator: 5mA
- Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate;All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed
- Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current
- Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input; Coil +, Coil - and Trigger.
- Wide Application: DC 12V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc.
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
Dimensions: 0.72 x 1.90 x 1.02 inches
See On Amazon #6
OONO 30Amp 48V 2x6 Position Terminal Block Distribution Module
Asin: B09D3BV22M | Model: D-1459 | PartNumber: D-1459 | Ean: 6954525592219
A / B Terminal Blocks, Pitch 7.62Mm/0.3", Wire Range 26Awg ~ 10Awg / 4.0Mm Square, Rated Current 30Amp. Strip Length 8Mm. Screws - M3,Steel, Cr3+ Zn Plated. Pin Header And Cage - Brass..
Ul Ce Cqc Certified Terminal Blocks, Fr-4 Glass Fiber Pcb..
A1~B3 / A4~B6 Terminal Blocks, Pitch 5.0Mm/0.197", Wire Range 26Awg ~ 12Awg / 2.5Mm Square. Rated Current 16Amp. Strip Length 7Mm. Screws - M3,Steel, Cr3+ Zn Plated. Pin Header And Cage - Brass..
Rated Current 30 Amp(Total Input Or Output), Maximum Voltage 48V..
Features
- 30Amp 48V 2x6 position screw terminal block distribution module.
- Rated current 30 Amp(total input or output), Maximum voltage 48V.
- A / B terminal blocks, Pitch 7.62mm/0.3, Wire range 26AWG ~ 10AWG / 4.0mm square, rated current 30Amp. Strip length 8mm. Screws - M3,steel, Cr3+ Zn plated. Pin header and Cage - Brass.
- A1~B3 / A4~B6 terminal blocks, Pitch 5.0mm/0.197, Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn plated. Pin header and Cage - Brass.
- UL CE CQC certified terminal blocks, FR-4 glass fiber PCB.
- See more on Amazon...
Brand: OONO | Manufacturer: CZH-LABS
Dimensions: 1.14 x 3.19 x 2.56 inches
See On Amazon #7
Creality Original Ender 3 Nozzle Fan DC BRUSHLESS PD04010MS4 DC 24V 0.10A Cooling Fan 40mmx40mmx10mm 4010 Sleeve Bearing for 3D Printer
Asin: B07TGMG4VZ | Model: ENO-ender3-fan | PartNumber: ENO-ender3-fan | Ean: 0705300791268 | UPC: 705300791268
Operation Voltage: Dc 24V.
40X40x10mm.
Use For: Creality Ender-3/Ender-3 Pro/Ender-5.
Features
- It's 100% Creality Original
- Use For: Creality Ender-3/Ender-3 pro/Ender-5
- Operation Voltage: DC 24V
- 40x40x10MM
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: Creality 3D
Dimensions: 0.00 x 0.00 x 1.57 inches | Weight: 0.02 pounds
See On Amazon #8
Original Creality Ender 3 Fans, 4010 Extruder Hotend Fans 24V 4010 Axial Fan and Blower Fan 40x40x10mm for Ender 3/3 Pro/3S/3 V2/3 Max Ender 5/5S/5 Pro/5 Plus 3D Printer
Asin: B09LQFTZCJ
🌈 【Efficient Heat Dissipation】High-Speed 24V 3D Printer Fan Is Not Only Can Prevent Plugging, But Also The Wind Is Strong, Accelerate The Curing Of The Printed Model, And Ensure The Stable Molding Of The Model. 4010 Axial Fan 24V Has Also Fit For Ender 3 Series And Ender 5 Series Motherboard..
🌈 【After Sales Support】More Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly, Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What Question..
🌈 【Quiet Low Noise】Creality 3D Ender 3 Fans With Low-Volt Starting Voltage Characteristics, The Fans Can Run At High Speed At Low Speed, Allowing You To Enjoy Printing And Create Quietly..
🌈 【Easy To Install】Only 4 Steps, No Need To Disassemble The Motherboard And Wire Harness, Fast Wiring Just Replace The Fan Directly. There Is A Tin Ring Inside, Waterproof Hot Melt Glue, No Welding, Sealing And Waterproof, Anti-Leakage, High-Temperature Resistance. There Is No Built-In Blue Led Light..
Features
- Quality Assurance 100% officialCreality 3D printer fans DC 24V extruder hotend fan and DC 24V turbo cooling fan suitable for Ender 3 series, Ender 5 series, CR 10 series. Creality 3D printer fans are all original and high quality from 100% quality assurance.
- Easy to Install Only 4 steps, no need to disassemble the motherboard and wire harness, fast wiring just replace the fan directly. There is a tin ring inside, waterproof hot melt glue, no welding, sealing and waterproof, anti-leakage, high-temperature resistance. There is NO built-in blue LED light.
- Efficient Heat Dissipation High-speed 24V 3D printer fan is not only can prevent plugging, but also the wind is strong, accelerate the curing of the printed model, and ensure the stable molding of the model. 4010 Axial Fan 24V has also fit for Ender 3 series and Ender 5 series Motherboard.
- Quiet Low Noise Creality 3D Ender 3 fans with low-volt starting voltage characteristics, the fans can run at high speed at low speed, allowing you to enjoy printing and create quietly.
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly, cause our customer service will respond to you within 24 hours no matter what question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #9
WINSINN 50mm 5015 Blower Fan 12V, 3D Printer 24 Volt Fans Blower Turbine Turbo Dual Ball Bearing, Brushless Cooling 50mmx15mm 2PIN (Pack of 4Pcs)
Asin: B07DB7DLMM | Model: GFAN501524VB | PartNumber: GFAN501524VB | Ean: 0686603769300, 7753686202703 | UPC: 686603769300
✔️Rated Voltage: Dc 24V, Current: 0.1A, Power: 2.4W,Speed: 5500Prm, Air Pressure: 16.28Mmh₂o, Airflow: 3.23Cfm, Noise: 40Dba.
✔️Widely Used: Designed To Provide High Air Volume For Small Areas Which Requires Cooling Or Ventilation. Suitable For 3D Printer, Small Squirrel Cage, Humidifier, Aromatherapy And Can Be Used As A Replacement Fan For Any Electronic Products..
✔️Connector & Cable Length: Xh2.54 – 11.8In(300Mm), Size: 50Mm X 50Mm X 15Mm.
✔️High Quality Dual Ball Bearings, 5-Years Warranty. Balance Between High Air Volume And Low Noise, Suitable For 24 Hours / Day Long-Term Work, Long Life: 50,000 Hours..
Features
- WINSINN 5015 blower fan 24V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow place.
- High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
- Rated Voltage: DC 24V, Current: 0.1A, Power: 2.4W,Speed: 5500PRM, Air Pressure: 16.28mmH O, Airflow: 3.23CFM, Noise: 40dBA
- Connector & Cable length: XH2.54 11.8in(300mm), Size: 50mm x 50mm x 15mm
- Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, small squirrel cage, humidifier, aromatherapy and can be used as a replacement fan for any electronic products.
- See more on Amazon...
Brand: WINSINN | Manufacturer: WINSINN Technology Ltd
Dimensions: 1.97 x 0.59 x 1.97 inches
See On Amazon #10
Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan x 2 and DC 24V Turbo Fan x 2 for Ender 3 3D Printer
Asin: B08B3HCKCP | Model: SOV-FAN-KIT | PartNumber: SOV-FAN-KIT
Operation Voltage: Dc 24V.
Package Included: 2Pcs Dc 24V Extruder Hot End Fan And 2Pcs Dc 24V Turbo Fan.
Weight: 0.078Kg.
Materials: Plastic.
Features
- Fit for: 100% Creality Original. Fits for Ender 3, Ender 3X, Ender 3 Pro, Ender 3 V2
- Materials: Plastic
- Operation Voltage: DC 24V
- Weight: 0.078KG
- Package included: 2pcs DC 24V Extruder Hot End Fan and 2pcs DC 24V Turbo fan
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Weight: 0.20 pounds
See On Amazon
Looking For Something Else?
Search