uxcell Combination Drill and Tap Bit, 1/4" Hex Shank M6 x 1 Metric Titanium Coated High Speed Steel 4341 Spiral Flute Drilling Tapping Tool Extra Long
Asin: B0B1V3ZMZ4 | Model: a22040200ux1006 | PartNumber: a22040200ux1006
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features: Self-Centering Point, Do Not Need Assistant Center Drilling Or Center Punching. Quick Change 1/4-Inch Hex Shank Can Be Used On Power Tools More Easily And Securely. A Tapered End On Hex Shank Can Prevent Excessive Tapping..
Tips: Use On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Titanium Coating: Titanium Coating Provides Excellent Corrosion Resistance, Greatly Improves Wear Resistance And Hardness, And Reduces The Coefficient Of Friction. High Speed Steel Tool Has High Hardness And Toughness, Wear Resistance And Heat Resistance..
Wide Applications: Suitable For Processing Blind Holes. Used For Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc.. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Features
- Combination Drill and Tap Bit: Thread Size: M6 x 1; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
- Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.
- Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. High speed steel tool has high hardness and toughness, wear resistance and heat resistance.
- Tips: Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell Combination Drill and Tap
#1
uxcell Machine Tap #8-32 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs
Asin: B07VBN2P48 | Model: a19050800ux0929 | PartNumber: a19050800ux0929
Wide Applications: The Thread Tap Is Suitable For Drilling Mild Steels, Aluminum, Iron, Copper, Stainless Steel, Hard Plastic, Processing Through Holes Or Shallow Holes. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps: Used In Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Tap: Straight 3 Flutes Are Ground To Provide Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
High Speed Steel Tap: The Screw Tap Has High Wear Resistance, Fast Cutting Speed, High Strength And Hardness, And Long Service Life. With Uncoated Base Substrate Only, Suitable For General Purpose Tapping..
Features
- Thread Tap: Thread Size: #8-32 UNC; Class: 2B; Thread Length: 20mm / 0.8 inch; Shank Side Width: 3mm / 0.12 inch; Total Length: 54mm / 2.13 inch
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell Combination Drill and Tap Bit, 1/4" Hex Shank M8 x 1.25 Metric Titanium Coated High Speed Steel 4341 Spiral Flute Drilling Tapping Tool 2pcs
Asin: B0B1V3V1R8 | Model: a22040200ux0985 | PartNumber: a22040200ux0985
Features: Self-Centering Point, Do Not Need Assistant Center Drilling Or Center Punching. Quick Change 1/4-Inch Hex Shank Can Be Used On Power Tools More Easily And Securely. A Tapered End On Hex Shank Can Prevent Excessive Tapping..
Tips: Use On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Titanium Coating: Titanium Coating Provides Excellent Corrosion Resistance, Greatly Improves Wear Resistance And Hardness, And Reduces The Coefficient Of Friction. High Speed Steel Tool Has High Hardness And Toughness, Wear Resistance And Heat Resistance..
Wide Applications: Suitable For Processing Blind Holes. Used For Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc.. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Features
- Combination Drill and Tap Bit: Thread Size: M8 x 1.25; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
- Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.
- Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. High speed steel tool has high hardness and toughness, wear resistance and heat resistance.
- Tips: Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell Machine Tap #10-24 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs
Asin: B07VCSVG5P | Model: a19050800ux0932 | PartNumber: a19050800ux0932
Wide Applications: The Thread Tap Is Suitable For Drilling Mild Steels, Aluminum, Iron, Copper, Stainless Steel, Hard Plastic, Processing Through Holes Or Shallow Holes. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps: Used In Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Tap: Straight 3 Flutes Are Ground To Provide Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
High Speed Steel Tap: The Screw Tap Has High Wear Resistance, Fast Cutting Speed, High Strength And Hardness, And Long Service Life. With Uncoated Base Substrate Only, Suitable For General Purpose Tapping..
Features
- Thread Tap: Thread Size: #10-24 UNC; Class: 2B; Thread Length: 21mm / 0.83 inch; Shank Side Width: 3.7mm / 0.15 inch; Total Length: 63mm / 2.5 inch
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell M11 x 1mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0983D22V1 | Model: a21020200ux0312 | PartNumber: a21020200ux0312
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M11 x 1 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #5
uxcell M12 x 1.75mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0983CCLSL | Model: a21020200ux0314 | PartNumber: a21020200ux0314
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M12 x 1.75 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #6
uxcell Machine Tap #6-32 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 3pcs
Asin: B07VBN399R | Model: a19050800ux0925 | PartNumber: a19050800ux0925
Wide Applications: The Thread Tap Is Suitable For Drilling Mild Steels, Aluminum, Iron, Copper, Stainless Steel, Hard Plastic, Processing Through Holes Or Shallow Holes. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps: Used In Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Tap: Straight 3 Flutes Are Ground To Provide Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
High Speed Steel Tap: The Screw Tap Has High Wear Resistance, Fast Cutting Speed, High Strength And Hardness, And Long Service Life. With Uncoated Base Substrate Only, Suitable For General Purpose Tapping..
Features
- Thread Tap: Thread Size: #6-32 UNC; Class: 2B; Thread Length: 20mm / 0.8 inch; Shank Side Width: 3mm / 0.12 inch; Total Length: 54mm / 2.13 inch
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell M16 x 2mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0983C8221 | Model: a21020200ux0330 | PartNumber: a21020200ux0330
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M16 x 2 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction. Tap Size: thread length: 33mm / 1.3"; overall length: 102mm / 4.02"; square shank: 10mm / 0.39"; Die Size: outside diameter (OD): 38mm / 1.5"; thickness: 14mm / 0.55"
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell M8 x 0.75mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0983C2Y24 | Model: a21020200ux0300 | PartNumber: a21020200ux0300
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M8 x 0.75 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction. Tap Size: thread length: 20mm / 0.79"; overall length: 66mm / 2.6"; square shank: 5mm / 0.2"; Die Size: outside diameter (OD): 25mm / 0.98"; thickness: 7mm / 0.28"
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #9
uxcell Metric Tap M16 x 1.5mm Pitch H2 Right Hand Thread, 14.5mm Drill Bit HSS 9341 Black Oxide with 1/2 Inch Straight Reduced Shank
Asin: B0BCFS61D4 | Model: f22040600ux0301 | PartNumber: f22040600ux0301
Suitable For Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Appropriate Addition Of Coolant (E.G., Water) Can Extend The Service Life When Tapping..
High-Speed Steel Tool Is Good For Most General Purpose Applications, Featuring A Combination Of Hardness And Toughness For Wear Resistance.
Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
The Taper Taps Can Be Applied For Threading Machine And Electric Drills, Use To Cut Thread Inside Hole, Creating A Female Surface Which Functions Like A Nut..
Features
- Features: Metric Machine Tap [Shank Width: 9.8mm / 0.39 inch, Thread Length: 33.7mm / 1.33 inch, Total Length: 101mm / 3.98 inch], Reduced Shank Drill Bit[Cutting Diameter: 14.5mm / 0.57", Shank Diameter: 1/2" / 12.5mm (approx.), Cutting Edge Length: 78mm / 3.07", Overall Length: 157mm / 6.18"]
- The taper taps can be applied for threading machine and electric drills, use to cut thread inside hole, creating a female surface which functions like a nut.
- Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Appropriate addition of coolant (e.g., water) can extend the service life when tapping.
- Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- High-speed steel tool is good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell Combination Drill and Tap Bit, 1/4" Hex Shank M6 x 1 Metric Uncoated M35 Cobalt High Speed Steel Spiral Flute Drilling Tapping Tool 2pcs
Asin: B0B1V4GFD6 | Model: a22040200ux0947 | PartNumber: a22040200ux0947
Features: Self-Centering Point, Do Not Need Assistant Center Drilling Or Center Punching. Quick Change 1/4-Inch Hex Shank Can Be Used On Power Tools More Easily And Securely. A Tapered End On Hex Shank Can Prevent Excessive Tapping..
Tips: Use On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Coating: Features Just The Base Substrate Without Any Coatings, Good For Most General Purpose Thread Tapping. M35 Cobalt High Speed Steel Tool Features High Hardness (Hrc65-66) And High Red Hardness, High Wear Resistance..
Wide Applications: Suitable For Processing Blind Holes. Used For Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc.. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Features
- Combination Drill and Tap Bit: Thread Size: M6 x 1; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
- Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.
- Coating: Features just the base substrate without any coatings, good for most general purpose thread tapping. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance.
- Tips: Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell M6 x 0.75mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B098K2VXR7 | Model: a21020200ux0293 | PartNumber: a21020200ux0293
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M6 x 0.75 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell Combination Drill and Tap Bit, 1/4" Hex Shank M4 x 0.7 Metric Titanium Coated High Speed Steel 4341 Spiral Flute Drilling Tapping Tool
Asin: B0B1V4D1P1 | Model: a22040200ux0978 | PartNumber: a22040200ux0978
Features: Self-Centering Point, Do Not Need Assistant Center Drilling Or Center Punching. Quick Change 1/4-Inch Hex Shank Can Be Used On Power Tools More Easily And Securely. A Tapered End On Hex Shank Can Prevent Excessive Tapping..
Tips: Use On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Titanium Coating: Titanium Coating Provides Excellent Corrosion Resistance, Greatly Improves Wear Resistance And Hardness, And Reduces The Coefficient Of Friction. High Speed Steel Tool Has High Hardness And Toughness, Wear Resistance And Heat Resistance..
Wide Applications: Suitable For Processing Blind Holes. Used For Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc.. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Features
- Combination Drill and Tap Bit: Thread Size: M4 x 0.7; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
- Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.
- Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. High speed steel tool has high hardness and toughness, wear resistance and heat resistance.
- Tips: Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #13
uxcell M6 x 1mm Metric Left Hand Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B098XW1RB9 | Model: a21031100ux0274 | PartNumber: a21031100ux0274
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M6 x 1 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, left hand (reverse) tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #14
uxcell Combination Drill and Tap Bit, 1/4" Hex Shank M3 x 0.5 Metric Uncoated High Speed Steel 4341 Spiral Flute Drilling Tapping Tool 2pcs
Asin: B0B1V5BNQB | Model: a22040200ux0965 | PartNumber: a22040200ux0965
Features: Self-Centering Point, Do Not Need Assistant Center Drilling Or Center Punching. Quick Change 1/4-Inch Hex Shank Can Be Used On Power Tools More Easily And Securely. A Tapered End On Hex Shank Can Prevent Excessive Tapping..
Tips: Use On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Coating: Features Just The Base Substrate Without Any Coatings, Good For Most General Purpose Thread Tapping. High Speed Steel Tool Has High Hardness And Toughness, Wear Resistance And Heat Resistance..
Wide Applications: Suitable For Processing Blind Holes. Used For Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc.. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Features
- Combination Drill and Tap Bit: Thread Size: M3 x 0.5; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
- Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.
- Coating: Features just the base substrate without any coatings, good for most general purpose thread tapping. High speed steel tool has high hardness and toughness, wear resistance and heat resistance.
- Tips: Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell M8 x 1.25mm Metric Left Hand Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B09839M5JX | Model: a21031100ux0276 | PartNumber: a21031100ux0276
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M8 x 1.25 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, left hand (reverse) tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #16
uxcell Machine Tap #6-32UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 2pcs
Asin: B07VCSWCQ1
Wide Applications: The Thread Tap Is Suitable For Drilling Mild Steels, Aluminum, Iron, Copper, Stainless Steel, Hard Plastic, Processing Through Holes Or Shallow Holes. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps: Used In Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Tap: Straight 3 Flutes Are Ground To Provide Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
High Speed Steel Tap: The Screw Tap Has High Wear Resistance, Fast Cutting Speed, High Strength And Hardness, And Long Service Life. With Uncoated Base Substrate Only, Suitable For General Purpose Tapping..
Features
- Thread Tap: Thread Size: #6-32 UNC; Class: 2B; Thread Length: 20mm / 0.8 inch; Shank Side Width: 3mm / 0.12 inch; Total Length: 54mm / 2.13 inch
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell M3 x 0.5mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B09956T4LQ | Model: a21020200ux0287 | PartNumber: a21020200ux0287
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M3 x 0.5 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell Combination Drill and Tap Bit, 1/4" Hex Shank M3 x 0.5 Metric Titanium Coated High Speed Steel 4341 Spiral Flute Drilling Tapping Tool Extra Long 2pcs
Asin: B0B1V3R2Y3 | Model: a22040200ux1001 | PartNumber: a22040200ux1001
Features: Self-Centering Point, Do Not Need Assistant Center Drilling Or Center Punching. Quick Change 1/4-Inch Hex Shank Can Be Used On Power Tools More Easily And Securely. A Tapered End On Hex Shank Can Prevent Excessive Tapping..
Tips: Use On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Titanium Coating: Titanium Coating Provides Excellent Corrosion Resistance, Greatly Improves Wear Resistance And Hardness, And Reduces The Coefficient Of Friction. High Speed Steel Tool Has High Hardness And Toughness, Wear Resistance And Heat Resistance..
Wide Applications: Suitable For Processing Blind Holes. Used For Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc.. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Features
- Combination Drill and Tap Bit: Thread Size: M3 x 0.5; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
- Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.
- Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. High speed steel tool has high hardness and toughness, wear resistance and heat resistance.
- Tips: Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell Combination Drill and Tap Bit, 1/4" Hex Shank M3 x 0.5 Metric Uncoated M35 Cobalt High Speed Steel Spiral Flute Drilling Tapping Tool
Asin: B0B1V4LXZ7 | Model: a22040200ux0940 | PartNumber: a22040200ux0940
Features: Self-Centering Point, Do Not Need Assistant Center Drilling Or Center Punching. Quick Change 1/4-Inch Hex Shank Can Be Used On Power Tools More Easily And Securely. A Tapered End On Hex Shank Can Prevent Excessive Tapping..
Tips: Use On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Coating: Features Just The Base Substrate Without Any Coatings, Good For Most General Purpose Thread Tapping. M35 Cobalt High Speed Steel Tool Features High Hardness (Hrc65-66) And High Red Hardness, High Wear Resistance..
Wide Applications: Suitable For Processing Blind Holes. Used For Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc.. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Features
- Combination Drill and Tap Bit: Thread Size: M3 x 0.5; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
- Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.
- Coating: Features just the base substrate without any coatings, good for most general purpose thread tapping. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance.
- Tips: Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell M16 x 1.25mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0983B2KYR | Model: a21020200ux0332 | PartNumber: a21020200ux0332
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M16 x 1.25 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search