uxcell Square Nose End Mill, 0.5mm Solid Carbide AlTiSin Coated Long Reach CNC Router Bits 2 Flutes Milling Cutter with Extended Neck, 3mm Cutting Length 4mm Shank
Asin: B0B2JDDM3F | Model: a22032600ux0174 | PartNumber: a22032600ux0174
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Solid Carbide: Made Of Super Fine Grain Carbide, It Has High Hardness (Hrc92), High Strength, And Wear Resistance. With Good Milling And Cutting Performance, Carbide Can Run At Higher Speed Than High-Speed Steel. The Passivation Treatment Greatly Increases Corrosion Resistance And Wear Resistance..
Tips: Use On Cnc Machining Centers, Cnc Machine Tools, Precision Engraving Machines And Other Equipment. The Longer The Length Of The Tool Clamped By The Chuck, The Better. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life And Obtain Better Processing Accuracy And Performance..
Features: Features Square End Cut, 2-Flute Design, Large And Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting. The Altisin Composite Coating Has High Hardness, High Wear Resistance And High Thermal Stability..
Wide Applications: Suitable For Cutting Stainless Steel, Carbon Steel, Malleable Cast Iron, Alloy Steel, Die Steel, Tool Steel Etc. The End Mill Has An Extended Neck (Long Reach) That Provides Additional Reach And Clearance For Machining Deep Or Hard-To-Reach Areas..
Features
- End Mill: Cutting Diameter: 0.5mm / 0.02"; effective cutting length: 3mm / 0.12"; cutting edge length: 2mm / 0.08"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: HRC60. Used for groove machining, side milling and finishing.
- Wide Applications: Suitable for cutting stainless steel, carbon steel, malleable cast iron, alloy steel, die steel, tool steel etc. The end mill has an extended neck (long reach) that provides additional reach and clearance for machining deep or hard-to-reach areas.
- Solid Carbide: Made of super fine grain carbide, it has high hardness (HRC92), high strength, and wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel. The passivation treatment greatly increases corrosion resistance and wear resistance.
- Features: Features square end cut, 2-flute design, large and spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
- Tips: Use on CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell Square Nose End Mill
#1
uxcell 1/2" x 1/2" 4 Flute Straight Shank HSS Spiral End Mill Milling Cutter
Asin: B008OUGSMM | Model: a12051600ux0809 | PartNumber: a12051600ux0809 | Ean: 0608641121940 | UPC: 608641121940
Cutting Depth : 35Mm/1.4";Shank Diameter : 12.7Mm/1/2".
Package Content : 1 X End Mill.
Total Length : 86Mm/3.386";Color : As Picture Shown.
4 Flutes.
Features
- Product Name : End Mill;Material : HSS
- 4 flutes
- Cutting Depth : 35mm/1.4;Shank Diameter : 12.7mm/1/2
- Total Length : 86mm/3.386;Color : As Picture Shown
- Package Content : 1 x End Mill
- See more on Amazon...
First Available: 08/16/2018
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 3.94 x 0.79 inches
See On Amazon #2
uxcell Square Nose End Mill, 2mm Tip Dia Solid Carbide AlTiN Coated CNC Router Bits 4 Flute Spiral Milling Cutter HRC45 with 4mm Shank 50mm (2-inch) Length, 2pcs
Asin: B09T3Q6CRB | Model: a22010500ux0272 | PartNumber: a22010500ux0272
Wide Applications: Suitable For Cutting Carbon Steel, Malleable Cast Iron, Alloy Steel, Die Steel, Etc. For Shallow Groove Machining, Side Milling And Finishing. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Obtain Better Processing Accuracy And Performance..
Features: Square End Cut, 4-Flute Design, Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting. Altin Composite Coating Can Increase Hardness, Reduce Oxidation Wear For Better Wear Resistance And Extend Tool Life..
Solid Carbide Tool: P05 Carbide End Mill Cutter Is High Hardness, Wear Resistance, And Heat Resistance. Carbide Material With Good Milling And Cutting Performance, Ensures High Work Efficiency. Carbide Can Run At Higher Speed Than High-Speed Steel..
Features
- Square Nose End Mill: Cutting Diameter: 2mm / 0.08"; cutting flute length: 6mm / 0.24"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: HRC45; spiral angle: 35 degree.
- Solid Carbide Tool: P05 carbide end mill cutter is high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance, ensures high work efficiency. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, die steel, etc. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Features: Square end cut, 4-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. AlTiN composite coating can increase hardness, reduce oxidation wear for better wear resistance and extend tool life.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell 10Pcs 1mm Titanium Coat Carbide End Mill Engraving Milling Cutter CNC Router Bits for PCB Machine, 1/8" Shank
Asin: B07R55D6RN | Model: a19031400ux0498 | PartNumber: a19031400ux0498
Features: High Hardness, High Wear Resistance, High Strength. Have Sufficient Bending Strength And Wear Resistance..
Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal, Plastics, Wood, Smt, Fiber Glass, Carbon Board. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches. The Longer The Length Of The Tool Clamped By The Chuck, The Better..
Material: Use Of Ultra-Fine Grain Carbide Material With Good Milling And Cutting Performance, Ensure High Work Efficiency..
Features
- STANDARD: Cutting edge diameter: 1mm / 0.039"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 7mm / 0.28"
- MATERIAL: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
- FEATURES: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- CHARACTERISTICS: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches. The longer the length of the tool clamped by the chuck, the better.
- APPLICATION: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, SMT, Fiber glass, Carbon board. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.04 x 1.50 x 0.12 Inches
See On Amazon #4
uxcell 10Pcs 0.6mm Carbide End Mill Engraving Milling Cutter CNC Router Bits for PCB Machine, 1/8" Shank
Asin: B07R9K4ZP7 | Model: a19031400ux0481 | PartNumber: a19031400ux0481
Features: High Hardness, High Wear Resistance, High Strength. Have Sufficient Bending Strength And Wear Resistance..
Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal, Plastics, Wood, Smt, Fiber Glass, Carbon Board. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches. The Longer The Length Of The Tool Clamped By The Chuck, The Better..
Material: Use Of Ultra-Fine Grain Carbide Material With Good Milling And Cutting Performance, Ensure High Work Efficiency..
Features
- STANDARD: Cutting edge diameter: 0.6mm / 0.024"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 5mm / 0.2"
- MATERIAL: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
- FEATURES: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- CHARACTERISTICS: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches. The longer the length of the tool clamped by the chuck, the better.
- APPLICATION: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, SMT, Fiber glass, Carbon board. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.04 x 1.50 x 0.12 Inches
See On Amazon #5
uxcell 4pcs 1mm Dia 4mm Shank Square Nose End Mill 4 Flutes HRC45 Carbide AlTiN Coated CNC Router Bits Cutter Tools for End Milling CNC Machining, Black
Asin: B0D1V63B2M
Altin Coating: The Surface Treatment Uses Altin Coating, Which Has High Hardness, Making The Tool Surface Resistant To Cutting Forces And Wear, Extending Service Life; Secondly, It Also Has Excellent Wear Resistance And Heat Resistance, Thereby Reducing Cutting Forces , Improve Cutting Speed And Efficiency, So That The Tool Maintains Stable Performance; In Addition, The Altin Coating Surface Has Good Lubricity, Which Can Reduce The Adhesion Of Chips Between The Tool And The Workpiece, Which Help.
Widely Applications: Suitable For Cutting Carbon Steel, Malleable Cast Iron, Alloy Steel, Die Steel, Etc. For Shallow Groove Machining, Side Milling And Finishing. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Feature: The Helix Angle Of This Milling Cutter Is 35 Degrees. It Provides The Best Cutting Effect And Improves Chip Removal During Cutting, Thereby Improving Cutting Efficiency And Surface Quality. This Angled Design Can Also Reduce The Load On Cutting And Machine Tools During Processing, Improve Heat Dissipation Performance, And Extend The Service Life Of Cutting Tools And Equipment..
Solid Carbide: The Milling Cutter Is Made Of Tungsten Steel (Carbide), Which Has A Series Of Excellent Properties Such As High Hardness, Wear Resistance, Good Strength And Toughness, Heat Resistance, And Corrosion Resistance. These Properties Extend Tool Life And Keep End Mills Edge Blades, Helping To Improve Cutting Accuracy And Efficiency..
Features
- Square Nose End Mill: Cutting Diameter: 1mm /0.04"; cutting flute length: 3mm /0.12"; shank diameter: 4mm / 0.16"; overall length: 50mm / 1.97"; cutting hardness: HRC45; spiral angle: 35 degree.
- Solid Carbide: The milling cutter is made of tungsten steel (carbide), which has a series of excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance, and corrosion resistance. These properties extend tool life and keep end mills edge blades, helping to improve cutting accuracy and efficiency.
- AlTiN Coating: The surface treatment uses AlTiN coating, which has high hardness, making the tool surface resistant to cutting forces and wear, extending service life; secondly, it also has excellent wear resistance and heat resistance, thereby reducing cutting forces , Improve cutting speed and efficiency, so that the tool maintains stable performance; in addition, the AlTiN coating surface has good lubricity, which can reduce the adhesion of chips between the tool and the workpiece, which help
- Feature: The helix angle of this milling cutter is 35 degrees. It provides the best cutting effect and improves chip removal during cutting, thereby improving cutting efficiency and surface quality. This angled design can also reduce the load on cutting and machine tools during processing, improve heat dissipation performance, and extend the service life of cutting tools and equipment.
- Widely Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, die steel, etc. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell Square Nose End Mill, 6mm Tip Dia Solid Carbide AlTiN Coated CNC Router Bits 4 Flute Spiral Milling Cutter HRC55 with 6mm Shank 75mm (3-inch) Length
Asin: B09T3NZM58 | Model: a22010500ux0302 | PartNumber: a22010500ux0302
Wide Applications: Suitable For Cutting Carbon Steel, Malleable Cast Iron, Alloy Steel, Stainless Steel, Die Steel, Tool Steel, Heat Treated Steel. For Shallow Groove Machining, Side Milling And Finishing. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Obtain Better Processing Accuracy And Performance..
Features: Square End Cut, 4-Flute Design, Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting. Altin Composite Coating Can Increase Hardness, Reduce Oxidation Wear For Better Wear Resistance And Extend Tool Life..
Solid Carbide Tool: M30 Carbide End Mill Cutter Is Super Fine Grain Carbide, With High Hardness, Wear Resistance, And Heat Resistance. Carbide Material With Good Milling And Cutting Performance. Carbide Can Run At Higher Speed Than High-Speed Steel..
Features
- Square Nose End Mill: Cutting Diameter: 6mm / 0.24"; cutting flute length: 25mm / 0.98"; shank diameter: 6mm / 0.24"; overall length: 75mm / 3"; cutting hardness: HRC55; spiral angle: 35 degree.
- Solid Carbide Tool: M30 carbide end mill cutter is super fine grain carbide, with high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, stainless steel, die steel, tool steel, heat treated steel. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Features: Square end cut, 4-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. AlTiN composite coating can increase hardness, reduce oxidation wear for better wear resistance and extend tool life.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell 16mmx17mmx32mmx92mm Machining Cutting Tool Helical Groove 4 Flute Straight Shank Milling Cutter End Mill
Asin: B01B1VUF06 | Model: a15112300ux0847 | PartNumber: a15112300ux0847 | Ean: 0712662961239 | UPC: 712662961239
Shank Diameter: 16Mm / 0.63";Total Length: 92Mm / 3.6".
Package Content : 1 X Straight Shank End Mill.
Color : Silver Tone;Weight: 128G.
Cutting Diameter: 17Mm / 0.67"; Cutting Depth: 32Mm / 1.26".
Features
- Product Name : End Mill;Design : 4 Flute
- Cutting Diameter: 17mm / 0.67; Cutting Depth: 32mm / 1.26
- Shank Diameter: 16mm / 0.63;Total Length: 92mm / 3.6
- Color : Silver Tone;Weight: 128g
- Package Content : 1 x Straight Shank End Mill
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 5.12 x 3.54 inches
See On Amazon #8
uxcell Square Nose End Mill, 6mm Tip Dia Solid Carbide AlTiN Coated CNC Router Bits 2 Flute Spiral Milling Cutter HRC55 with 6mm Shank 50mm (2-inch) Length
Asin: B09T3PXJ1D | Model: a22010500ux0314 | PartNumber: a22010500ux0314
Wide Applications: Suitable For Cutting Carbon Steel, Malleable Cast Iron, Alloy Steel, Stainless Steel, Die Steel, Tool Steel, Heat Treated Steel. For Shallow Groove Machining, Side Milling And Finishing. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Obtain Better Processing Accuracy And Performance..
Features: Square End Cut, 2-Flute Design, Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting. Altin Composite Coating Can Increase Hardness, Reduce Oxidation Wear For Better Wear Resistance And Extend Tool Life..
Solid Carbide Tool: M30 Carbide End Mill Cutter Is Super Fine Grain Carbide, With High Hardness, Wear Resistance, And Heat Resistance. Carbide Material With Good Milling And Cutting Performance. Carbide Can Run At Higher Speed Than High-Speed Steel..
Features
- Square Nose End Mill: Cutting Diameter: 6mm / 0.24"; cutting flute length: 15mm / 0.59"; shank diameter: 6mm / 0.24"; overall length: 50mm / 2"; cutting hardness: HRC55; spiral angle: 35 degree.
- Solid Carbide Tool: M30 carbide end mill cutter is super fine grain carbide, with high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, stainless steel, die steel, tool steel, heat treated steel. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Features: Square end cut, 2-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. AlTiN composite coating can increase hardness, reduce oxidation wear for better wear resistance and extend tool life.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell a15082100ux0039 3/8 x 3/8 Inch HSSAL 4 Flutes Straight Shank End Mill Cutter Bits 2pcs Pack of 2
Asin: B017NC1LO6 | Model: a15082100ux0039 | PartNumber: a15082100ux0039 | Ean: 0712662538844 | UPC: 712662538844
Cutting Depth: 25Mm/ 1"; Product Name: End Mill Cutter.
Weight: 75G; Color: Gray.
Package Content: 2 X End Mill Cutter, 2 X Case; Material: Hssal.
Cutting Diameter: 3/8"; Flutes: 4-Flute.
Features
- Overall Length: 2 3/4"; Shank Diameter: 3/8"
- Cutting Diameter: 3/8; Flutes: 4-Flute
- Cutting Depth: 25mm/ 1; Product Name: End Mill Cutter
- Package Content: 2 x End Mill Cutter, 2 x Case; Material: HSSAL
- Weight: 75g; Color: Gray
- See more on Amazon...
First Available: 08/20/2018
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 3.15 x 1.18 Inches
See On Amazon #10
uxcell Square Nose End Mill, 0.6mm Solid Carbide AlTiSin Coated Long Reach CNC Router Bits 2 Flutes Milling Cutter with Extended Neck, 2mm Cutting Length 4mm Shank
Asin: B0B1ZJNYV8 | Model: a22032600ux0179 | PartNumber: a22032600ux0179
Solid Carbide: Made Of Super Fine Grain Carbide, It Has High Hardness (Hrc92), High Strength, And Wear Resistance. With Good Milling And Cutting Performance, Carbide Can Run At Higher Speed Than High-Speed Steel. The Passivation Treatment Greatly Increases Corrosion Resistance And Wear Resistance..
Tips: Use On Cnc Machining Centers, Cnc Machine Tools, Precision Engraving Machines And Other Equipment. The Longer The Length Of The Tool Clamped By The Chuck, The Better. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life And Obtain Better Processing Accuracy And Performance..
Features: Features Square End Cut, 2-Flute Design, Large And Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting. The Altisin Composite Coating Has High Hardness, High Wear Resistance And High Thermal Stability..
Wide Applications: Suitable For Cutting Stainless Steel, Carbon Steel, Malleable Cast Iron, Alloy Steel, Die Steel, Tool Steel Etc. The End Mill Has An Extended Neck (Long Reach) That Provides Additional Reach And Clearance For Machining Deep Or Hard-To-Reach Areas..
Features
- End Mill: Cutting Diameter: 0.6mm / 0.024"; effective cutting length: 2mm / 0.08"; cutting edge length: 2mm / 0.08"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: HRC60. Used for groove machining, side milling and finishing.
- Wide Applications: Suitable for cutting stainless steel, carbon steel, malleable cast iron, alloy steel, die steel, tool steel etc. The end mill has an extended neck (long reach) that provides additional reach and clearance for machining deep or hard-to-reach areas.
- Solid Carbide: Made of super fine grain carbide, it has high hardness (HRC92), high strength, and wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel. The passivation treatment greatly increases corrosion resistance and wear resistance.
- Features: Features square end cut, 2-flute design, large and spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
- Tips: Use on CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell Square Nose End Mill, 1mm Tip Dia Solid Carbide AlTiN Coated CNC Router Bits 2 Flute Spiral Milling Cutter HRC45 with 4mm Shank 50mm (2-inch) Length, 2pcs
Asin: B09T3PQMMB | Model: a22010500ux0319 | PartNumber: a22010500ux0319
Wide Applications: Suitable For Cutting Carbon Steel, Malleable Cast Iron, Alloy Steel, Die Steel, Etc. For Shallow Groove Machining, Side Milling And Finishing. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Obtain Better Processing Accuracy And Performance..
Features: Square End Cut, 2-Flute Design, Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting. Altin Composite Coating Can Increase Hardness, Reduce Oxidation Wear For Better Wear Resistance And Extend Tool Life..
Solid Carbide Tool: P05 Carbide End Mill Cutter Is High Hardness, Wear Resistance, And Heat Resistance. Carbide Material With Good Milling And Cutting Performance, Ensures High Work Efficiency. Carbide Can Run At Higher Speed Than High-Speed Steel..
Features
- Square Nose End Mill: Cutting Diameter: 1mm / 0.04"; cutting flute length: 3mm / 0.12"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: HRC45; spiral angle: 35 degree.
- Solid Carbide Tool: P05 carbide end mill cutter is high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance, ensures high work efficiency. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, die steel, etc. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Features: Square end cut, 2-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. AlTiN composite coating can increase hardness, reduce oxidation wear for better wear resistance and extend tool life.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell 10Pcs 1.3mm Carbide End Mill Engraving Milling Cutter CNC Router Bits for PCB Machine, 1/8" Shank
Asin: B07R9HQMVW | Model: a19031400ux0488 | PartNumber: a19031400ux0488
Features: High Hardness, High Wear Resistance, High Strength. Have Sufficient Bending Strength And Wear Resistance..
Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal, Plastics, Wood, Smt, Fiber Glass, Carbon Board. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches. The Longer The Length Of The Tool Clamped By The Chuck, The Better..
Material: Use Of Ultra-Fine Grain Carbide Material With Good Milling And Cutting Performance, Ensure High Work Efficiency..
Features
- STANDARD: Cutting edge diameter: 1.3mm / 0.05"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 8mm / 0.31"
- MATERIAL: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
- FEATURES: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- CHARACTERISTICS: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches. The longer the length of the tool clamped by the chuck, the better.
- APPLICATION: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, SMT, Fiber glass, Carbon board. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell Square Nose End Mill, 8mm Tip Dia Solid Carbide AlTiN Coated CNC Router Bits 2 Flute Spiral Milling Cutter HRC45 with 8mm Shank 100mm (4-inch) Length
Asin: B09T3NB4G4 | Model: a22010500ux0341 | PartNumber: a22010500ux0341
Wide Applications: Suitable For Cutting Carbon Steel, Malleable Cast Iron, Alloy Steel, Die Steel, Etc. For Shallow Groove Machining, Side Milling And Finishing. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Obtain Better Processing Accuracy And Performance..
Features: Square End Cut, 2-Flute Design, Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting. Altin Composite Coating Can Increase Hardness, Reduce Oxidation Wear For Better Wear Resistance And Extend Tool Life..
Solid Carbide Tool: P05 Carbide End Mill Cutter Is High Hardness, Wear Resistance, And Heat Resistance. Carbide Material With Good Milling And Cutting Performance, Ensures High Work Efficiency. Carbide Can Run At Higher Speed Than High-Speed Steel..
Features
- Square Nose End Mill: Cutting Diameter: 8mm / 0.31"; cutting flute length: 35mm / 1.38"; shank diameter: 8mm / 0.31"; overall length: 100mm / 4"; cutting hardness: HRC45; spiral angle: 35 degree.
- Solid Carbide Tool: P05 carbide end mill cutter is high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance, ensures high work efficiency. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, die steel, etc. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Features: Square end cut, 2-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. AlTiN composite coating can increase hardness, reduce oxidation wear for better wear resistance and extend tool life.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell End Mill CNC Router Bits, 1/8" 3.175mm Shank 0.4mm x 3mm Titanium Coated Tungsten Carbide Engraving Milling Cutter for PCB Plastic Fiber Wood 2pcs
Asin: B0B2JZ2MRQ | Model: a22033000ux0779 | PartNumber: a22033000ux0779
Carbide Tools G05 Tungsten Carbide Tools Has High Hardness (Hrc94.5), Wear Resistance, Good Toughness And Heat Resistance. With Good Milling And Cutting Performance, Carbide Material Can Ensure High Work Efficiency..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life And Obtain Better Processing Accuracy And Performance..
Titanium Coating: Titanium Coating Provides Excellent Corrosion Resistance, Greatly Improves Wear Resistance And Hardness, And Reduces The Coefficient Of Friction. Sharp Cutting Edge Provides Smooth Cutting And No Glitches..
Wide Applications: Suitable For Engraving And Milling Printed Circuit Boards, Pcb, Mdf, Abs, Pvc, Acrylic, Nylon, Plastic, Wood, Fiber Glass, Carbon Fiber, Density Board, Plasterboard, Etc. Use On Cnc Machining Centers, Machine Tools, Precision Engraving Machines And Other Equipment..
Features
- End Mills: Cutting edge diameter: 0.4mm / 0.016"; shank diameter: 3.175mm / 1/8"; cutting edge length: 3mm / 0.12"; overall length: 37mm / 1.46"; milling direction: right hand; style: corn shape. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for engraving and milling printed circuit boards, PCB, MDF, ABS, PVC, acrylic, nylon, plastic, wood, fiber glass, carbon fiber, density board, plasterboard, etc. Use on CNC machining centers, machine tools, precision engraving machines and other equipment.
- Carbide Tools G05 tungsten carbide tools has high hardness (HRC94.5), wear resistance, good toughness and heat resistance. With good milling and cutting performance, carbide material can ensure high work efficiency.
- Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. Sharp cutting edge provides smooth cutting and no glitches.
- Tips: The longer the length of the tool clamped by the chuck, the better. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell 3/4" Cutting HSSAL Spiral Drill Bit Straight End Mill Cutter 4 Flute with 3/4" Shank
Asin: B07MNLSJZG
Designed With 4 Flutes, Straight Shank, Deep Helical Groove.
Suitable For Cnc Data Processing Center, Carved, High-Speed Machines..
Apply To Carbon Steel, Soft Alloy Steel, Die Steel, Tool Steel, Cast Iron, Titanium, Aluminum, Etc.
Cutting Length: 7/4"; Overall Length: 4".
Features
- Cutting Diameter: 3/4"; Shank Diameter: 3/4"
- Cutting Length: 7/4; Overall Length: 4
- Designed with 4 flutes, straight shank, deep helical groove
- Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc
- Suitable for CNC data processing center, carved, high-speed machines.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.33 x 1.18 Inches
See On Amazon #16
uxcell End Mill CNC Router Bits, 1/8" 3.175mm Shank 0.4mm x 3mm Titanium Coated Tungsten Carbide Left Hand Engraving Milling Cutter for PCB Plastic Fiber Wood 4pcs
Asin: B0B2JXLM6Y | Model: a22033000ux0861 | PartNumber: a22033000ux0861
Carbide Tools G05 Tungsten Carbide Tools Has High Hardness (Hrc94.5), Wear Resistance, Good Toughness And Heat Resistance. With Good Milling And Cutting Performance, Carbide Material Can Ensure High Work Efficiency..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life And Obtain Better Processing Accuracy And Performance..
Titanium Coating: Titanium Coating Provides Excellent Corrosion Resistance, Greatly Improves Wear Resistance And Hardness, And Reduces The Coefficient Of Friction. Sharp Cutting Edge Provides Smooth Cutting And No Glitches..
Wide Applications: Suitable For Engraving And Milling Printed Circuit Boards, Pcb, Mdf, Abs, Pvc, Acrylic, Nylon, Plastic, Wood, Fiber Glass, Carbon Fiber, Density Board, Plasterboard, Etc. Use On Cnc Machining Centers, Machine Tools, Precision Engraving Machines And Other Equipment..
Features
- End Mills: Cutting edge diameter: 0.4mm / 0.016"; shank diameter: 3.175mm / 1/8"; cutting edge length: 3mm / 0.12"; overall length: 37mm / 1.46"; milling direction: left hand; style: corn shape. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for engraving and milling printed circuit boards, PCB, MDF, ABS, PVC, acrylic, nylon, plastic, wood, fiber glass, carbon fiber, density board, plasterboard, etc. Use on CNC machining centers, machine tools, precision engraving machines and other equipment.
- Carbide Tools G05 tungsten carbide tools has high hardness (HRC94.5), wear resistance, good toughness and heat resistance. With good milling and cutting performance, carbide material can ensure high work efficiency.
- Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. Sharp cutting edge provides smooth cutting and no glitches.
- Tips: The longer the length of the tool clamped by the chuck, the better. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell Square Nose End Mill, 8mm Tip Dia Solid Carbide Uncoated CNC Router Bits 2 Flute Spiral Milling Cutter HRC55 with 8mm Shank 75mm (3-inch) Length
Asin: B09T3Q7QRZ | Model: a22010500ux0357 | PartNumber: a22010500ux0357
Wide Applications: Suitable For Cutting Aluminum, Copper, Plastic, Etc.. For Shallow Groove Machining, Side Milling And Finishing. Use On Cnc Machining Centers, Engraving Machines And Other High-Speed Cnc Machine Tools..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Obtain Better Processing Accuracy And Performance..
Features: Square End Cut, 2-Flute Design, Spiral Chip Space Design For Fast And Clean Chip Removal. Features Just The Base Substrate Without Any Coatings, Good For General Purpose Cutting In Wide Ranges Of Applications..
Solid Carbide Tool: M30 Carbide End Mill Cutter Is Super Fine Grain Carbide, With High Hardness, Wear Resistance, And Heat Resistance. Carbide Material With Good Milling And Cutting Performance. Carbide Can Run At Higher Speed Than High-Speed Steel..
Features
- Square Nose End Mill: Cutting Diameter: 8mm / 0.31"; cutting flute length: 30mm / 1.18"; shank diameter: 8mm / 0.31"; overall length: 75mm / 3"; cutting hardness: HRC55.
- Solid Carbide Tool: M30 carbide end mill cutter is super fine grain carbide, with high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for cutting aluminum, copper, plastic, etc.. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Features: Square end cut, 2-flute design, spiral chip space design for fast and clean chip removal. Features just the base substrate without any coatings, good for general purpose cutting in wide ranges of applications.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell Carbide Square End Mill, 3/8" Diameter AlTiN Coated 4 Flutes Milling Bit Cutter, for Carbon Steel Alloy Steel Titanium Metal, 3/8" Shank 1-3/4" Cut Length 4" Extra Long HRC55
Asin: B0D3HJJ9GR
Altin Coating: Altin (Aluminum Titanium Nitride) Coating Provides Enhanced Hardness, High Oxidation Resistance, And Increased Lubricity. Offers Excellent Performance In Dry Cutting Applications And At High Temperatures. Micro Grain Carbide Milling Cutter Offers High Hardness, Wear Resistance, Enhanced Rigidity And Excellent Heat Resistance..
Tips: Use On Standard Milling Machines, Cnc Machining Centers, Engraving Machines. Make Sure The End Mill Is Suitable For The Specific Application And Material Being Processed. Use A Suitable Coolant Or Lubrication Method. Select An Appropriate Feed Rate And Cutting Speed..
Features: Precision Ground Cutting Edges Allow For Clean, Precise Cuts, Resulting In Accurate Machining And Excellent Surface Finish. Up-Cut Spiral Flutes Lift Chips Upward And Away From The Cutting Area. Large Spiral Design Helps Effectively Remove Chips During Cutting..
Wide Applications: Mill Bit Can Create Slots (Keyways Or Internal Grooves), Straight Or Square Edge Features, Flat Smooth Surfaces, Holes Or For Roughing, Finishing And Side Milling Operations. Well-Suited For Machining Abrasive Materials Like Carbon Steel, Alloy Steel, And Titanium..
Features
- Square End Mill Size: Cutting diameter: 3/8"; shank diameter: 3/8"; cutting length: 1-3/4"; total length: 4" (extra long); number of flutes: 4; cutting hardness: HRC55; end cut type: square end; cutting direction: upcut (right hand)
- Wide Applications: Mill bit can create slots (keyways or internal grooves), straight or square edge features, flat smooth surfaces, holes or for roughing, finishing and side milling operations. Well-suited for machining abrasive materials like carbon steel, alloy steel, and titanium.
- AlTiN Coating: AlTiN (Aluminum Titanium Nitride) coating provides enhanced hardness, high oxidation resistance, and increased lubricity. Offers excellent performance in dry cutting applications and at high temperatures. Micro grain carbide milling cutter offers high hardness, wear resistance, enhanced rigidity and excellent heat resistance.
- Features: Precision ground cutting edges allow for clean, precise cuts, resulting in accurate machining and excellent surface finish. Up-cut spiral flutes lift chips upward and away from the cutting area. Large spiral design helps effectively remove chips during cutting.
- Tips: Use on standard milling machines, CNC machining centers, engraving machines. Make sure the end mill is suitable for the specific application and material being processed. Use a suitable coolant or lubrication method. Select an appropriate feed rate and cutting speed.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 5/8 Inch Cutting Dia 4 Flutes Straight Shank HSS-AL End Mill Router Bit 2pcs
Asin: B01M26U9YM | Model: a16061300ux0444 | PartNumber: a16061300ux0444 | Ean: 0709874240023 | UPC: 709874240023
Cutting Depth: 45Mm / 1.8"; Product Name: End Mill.
Weight: 249G; Color: Silver Tone.
Package Content: 2Pcs X End Mill, 2Pcs X Plastic Case; Material: Hss-Al.
Flutes: 4-Flute; Overall Length: 96Mm / 3.8".
Features
- Shank Diameter: 5/8"; Cutting Diameter: 5/8"
- Flutes: 4-Flute; Overall Length: 96mm / 3.8
- Cutting Depth: 45mm / 1.8; Product Name: End Mill
- Package Content: 2pcs x End Mill, 2pcs x Plastic Case; Material: HSS-AL
- Weight: 249g; Color: Silver Tone
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell End Mill CNC Router Bits, 1/8" 3.175mm Shank 0.5mm x 4mm Titanium Coated Tungsten Carbide Engraving Milling Cutter for PCB Plastic Fiber Wood 4pcs
Asin: B0B2JY23Z1 | Model: a22033000ux0783 | PartNumber: a22033000ux0783
Carbide Tools G05 Tungsten Carbide Tools Has High Hardness (Hrc94.5), Wear Resistance, Good Toughness And Heat Resistance. With Good Milling And Cutting Performance, Carbide Material Can Ensure High Work Efficiency..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life And Obtain Better Processing Accuracy And Performance..
Titanium Coating: Titanium Coating Provides Excellent Corrosion Resistance, Greatly Improves Wear Resistance And Hardness, And Reduces The Coefficient Of Friction. Sharp Cutting Edge Provides Smooth Cutting And No Glitches..
Wide Applications: Suitable For Engraving And Milling Printed Circuit Boards, Pcb, Mdf, Abs, Pvc, Acrylic, Nylon, Plastic, Wood, Fiber Glass, Carbon Fiber, Density Board, Plasterboard, Etc. Use On Cnc Machining Centers, Machine Tools, Precision Engraving Machines And Other Equipment..
Features
- End Mills: Cutting edge diameter: 0.5mm / 0.02"; shank diameter: 3.175mm / 1/8"; cutting edge length: 4mm / 0.16"; overall length: 37mm / 1.46"; milling direction: right hand; style: corn shape. Carbide can run at higher speed than high-speed steel.
- Wide Applications: Suitable for engraving and milling printed circuit boards, PCB, MDF, ABS, PVC, acrylic, nylon, plastic, wood, fiber glass, carbon fiber, density board, plasterboard, etc. Use on CNC machining centers, machine tools, precision engraving machines and other equipment.
- Carbide Tools G05 tungsten carbide tools has high hardness (HRC94.5), wear resistance, good toughness and heat resistance. With good milling and cutting performance, carbide material can ensure high work efficiency.
- Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. Sharp cutting edge provides smooth cutting and no glitches.
- Tips: The longer the length of the tool clamped by the chuck, the better. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search