Xotic Tech Front Bumper Lip Chin Spoiler Splitter Diffuser Protector Body Kit with Adjustable 10"-13" Support Splitter Rod Compatible with Honda Accord Civic, Volkswagen MK5 MK6 MK7, Black w/Red
Asin: B0B2QX5Z3G
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Special Design】Diy Installation, Different Cool Style Reveal No Matter You Install The Detachable Red Spoiler Or Not. Stereoscopic Design, Fluid Curve Surface With The Special Reinforcing Design On The Back Of The Spoiler, Physically Strong Firm And Durable, Anti-Collision And Scratch-Resistant. Dramatically Improves The Sporty Appearance. Perfectly Decorate Your Dear Car And Give Your Car A More Aggressive And Racing Appearance In A Minute..
【Well Protection】Provide Anti-Collision Protective Experience To Your Original Bumper, Protect From Scrapes From Driveways, Speed Bumps And Curbs, Alleviate The Damage.(The Packaging Box Shown Is For Illustration Purposes Only, Actual Packaging May Vary).
【Function】The Function Of The Front Bumper Lip Is To Deflect The Oncoming Air. It Forces Maximum Air To Go Over The Top Of The Vehicle And Allows Only A Minimal Quantity Of Air To Pass Underneath The Vehicle To Improves Aerodynamic..
【Material】Made Of Updated Durable And Sturdy Abs With Carbon Fiber Pattern Coating Finished, Exquisite Paint Through Strict Quality Control Standards To Build And Test. No Deformation In Long-Term Use. No Deformation In Long-Term Use, Physically Strong Firm And Durable, Anti-Collision And Scratch-Resistant.
Features
- Before buying, please measure the size of the front bumper and check your cars inner mudguard fender to make sure there is space to install (drilling) the front bumper splitter. (As a reference, 70.9" bumper width can fit). Note that the following cases are not applicable: if the original car have a front lip installed, the bottom of the front bumper is not flat enough or the front is too sharp.
- Material Made of updated durable and sturdy ABS with carbon fiber pattern coating finished, exquisite Paint through strict quality control standards to build and test. No deformation in long-term use. no deformation in long-term use, physically strong firm and durable, anti-collision and scratch-resistant
- Special Design DIY installation, different cool style reveal no matter you install the detachable Red spoiler or not. Stereoscopic design, fluid curve surface with the special Reinforcing Design on the back of the spoiler, physically strong firm and durable, anti-collision and scratch-resistant. Dramatically Improves The Sporty Appearance. Perfectly decorate your dear car and give your car a more aggressive and racing appearance in a minute.
- Function The function of the front bumper lip is to deflect the oncoming air. It forces maximum air to go over the top of the vehicle and allows only a minimal quantity of air to pass underneath the vehicle to improves aerodynamic.
- Well Protection Provide anti-collision protective experience to your original bumper, protect from scrapes from driveways, speed bumps and curbs, alleviate the damage.(The packaging box shown is for illustration purposes only, actual packaging may vary)
- See more on Amazon...
Brand: x xotic tech | Manufacturer: Xotic Tech Direct
Warranty: 90 day
See On Amazon Similar To Xotic Tech Front Bumper Lip
#1
EZ Lip The Original Universal Fit 1-Inch Lip Spoiler for Bumper
Asin: B009F10S3Y | Model: EZ-LIP 001 | PartNumber: EZ-LIP 001 | Ean: 0862416000001 | UPC: 862416000001
Super Strong 3M Adhesive – Ez Lip Installs With High Quality 3M Adhesive That Can Withstand The Harshest Climates. With Proper Installation, Our Products Easily Withstand Car Washes And High Speeds..
Made In Usa Quality – Designed And Manufactured In The Usa With Top Quality Materials And Craftsmanship. You Can Relax Knowing We Offer The Best Quality Universal-Fit Products..
One Size Fits All – Flexible Design Molds And Bends To The Shape Of Your Vehicle. You Can Choose To Install On The Front, Sides Or Rear. Universal Compatibility Works On Any Make Or Model..
Fast & Easy Installation – Just 3 Easy Steps And You’Ll Lower Your Car By Up To 1 Inch. No Drilling Or Screws Are Required. Just Peel, Stick And Cut!.
Features
- ENHANCE & PROTECT YOUR RIDE The EZ Lip Front Splitter is a fast, easy, and low-cost way to give your car an aggressive appearance while protecting from scrapes and scratches.
- FAST & EASY INSTALLATION Just 3 easy steps and you ll lower your car by up to 1 inch. No drilling or screws are required. Just peel, stick and cut!
- SUPER STRONG 3M ADHESIVE EZ Lip installs with high quality 3M adhesive that can withstand the harshest climates. With proper installation, our products easily withstand car washes and high speeds.
- ONE SIZE FITS ALL Flexible design molds and bends to the shape of your vehicle. You can choose to install on the front, sides or rear. Universal compatibility works on any make or model.
- MADE IN USA QUALITY Designed and manufactured in the USA with top quality materials and craftsmanship. You can relax knowing we offer the best quality universal-fit products.
- See more on Amazon...
Brand: EZ Lip | Manufacturer: EZ Lip
Dimensions: 7.87 x 7.87 x 3.15 inches | Weight: 0.66 pounds
See On Amazon #2
4pcs Car Rear Lower Bumper Wing Lip Diffuser, Anti-Crash Accessories Spoiler Shark Fin Protector, Rear Bumper Splitter Lip Wing with Screw, Universal Auto Decoration for Car SUV Truck
Asin: B0C73WKDLF | Model: Wing Lip Diffuser | PartNumber: Wing Lip Diffuser
【Universal Fit】: The Package Contains 4 Rear Diffuser Spoilers And Is Universally Suitable For Most Vehicles. The Product Size Is 4.9X2.6 Inches, Please Confirm The Size Before Purchasing To Make Sure It Is More Suitable For Your Vehicle. If You Have Any Questions About Our Products, Please Contact Us Directly! We Will Help You Solve The Problem And Will Always Do Our Best To Meet Your Needs..
【Elegant Surface】: There Are Four Colors For You To Choose, Black, Red Edge Black Cover, Red Cover, Carbon Fiber. Elegant Surface And Exquisite Workmanship Make Your Vehicle Look Beautiful And Stylish. There Are Four Splitters, Matching Screws And Strong Double-Sided Tape In The Package. If You Want Your Car To Have A Sporty Style, You Can Try This Product..
【Easy To Install】: The Diffuser Is Very Simple To Install, Fix The Diverter To The Rear Bumper With Double-Sided Tape, And Then Install Screws To Make It More Stable. In That Way No Matter How Fast You Drive Or How Bad The Road Condition Is, It Won't Fall Off Easily. The Installation Process Won't Take You Much Time. You Can Do It Independently..
【Shark Fin Spoilers】: The Shark Fin Design Uses Aerodynamic Principles To Reduce Wind Effect And Protect Your Car's Rear Bumper From Scratches Or Minor Wear And Damage. This Unique Design Makes Your Car Look More Aesthetically Pleasing, More Racing-Like And Stand Out From Other Vehicles..
Features
- Good Quality : Made of high-quality ABS material, it is durable, waterproof, not easy to deform, there are four colors for you to choose. It is lightweight, scratch-resistant, not easy to rust, and has a long service life. Shark fin style brings a stylish look to your car. It is a product that is both practical and aesthetically pleasing.
- Shark Fin Spoilers : The shark fin design uses aerodynamic principles to reduce wind effect and protect your car's rear bumper from scratches or minor wear and damage. This unique design makes your car look more aesthetically pleasing, more racing-like and stand out from other vehicles.
- Universal Fit : The package contains 4 rear diffuser spoilers and is universally suitable for most vehicles. The product size is 4.9x2.6 inches, please confirm the size before purchasing to make sure it is more suitable for your vehicle. If you have any questions about our products, please contact us directly! We will help you solve the problem and will always do our best to meet your needs.
- Easy to Install : The diffuser is very simple to install, fix the diverter to the rear bumper with double-sided tape, and then install screws to make it more stable. In that way no matter how fast you drive or how bad the road condition is, it won't fall off easily. The installation process won't take you much time. You can do it independently.
- Elegant Surface : There are four colors for you to choose, black, red edge black cover, red cover, carbon fiber. Elegant surface and exquisite workmanship make your vehicle look beautiful and stylish. There are four splitters, matching screws and strong double-sided tape in the package. If you want your car to have a sporty style, you can try this product.
- See more on Amazon...
Brand: AICEL | Manufacturer: AICEL
Dimensions: 0.50 x 1.00 x 1.00 Inches | Weight: 0.02 Pounds
Warranty: 0.2
See On Amazon #3
Front Lip ,HengJia Auto Parts 2.5m/8.2ft Car carbon fiber front lip,Front Bumper Lip ,Carbon Lip ,Side Skirt, front lip spoiler 100% waterproof protection(Carbon black)
Asin: B071S4CK8N | Model: 10 | PartNumber: 10 | Ean: 0736561476366, 0781930566988 | UPC: 736561476366, 781930566988
Made Of Durable And Sturdy Rubber.Smooth And Delicate Cross-Section,Prevent Scratches.Flexible In Use,Easy To Bend,Have Excellent Wear Resistance.Bumper Lip Completely Fit With Your Bumper Design..
Carbon Fiber Front Lip Energy Give Your Car An Aggressive , It Prevents Nasty Collision Scratches And Provides Protection Get An Aggressive And Lowered Look---- Make Your Car Looks More Sporty!（One Month Warranty,Case Of Damage Or Other Reasons,Please E-Mail Contact Us, We Will Respond Within 12 Hours Can Do For You And Arrange. Thank You Very Much For Your Order!）.
Easy To Install: Clean The Installation Location, And Then Apply The Adhesion And Squeeze. The Installation Of The Corner Of The Bumper Needs To Cut Out A Few Triangles To Fit The Original Car. The Product Pictures Have Installation Drawings For Reference. The Car Will Fluctuate During Driving. We Recommend Using Self-Tapping Screws For Reinforcement So As Not To Fall Off. Equipped With Screws To Achieve Better Adhesion And Fixation..
Specification:Long 250Cm*Wide 5.5Cm/98.4 Inch*2.16Inch.Quality 3M Automotive Tape Will Not Be Affected By Wet Or Cold Weather.D.I.Y Car Front Lip Fearturing In Curved Design, Slim, Can Be Stick On Front Or Rear Bumper, Body Kit, Side Skirt,Universal For Most Cars..
Features
- Carbon lip function:To provide an elegant and personalized appearance,Front bumper guard anti-collision protective,protect from scrapes from driveways,speed bumps and curbs.protect cars from collision and alleviate the damage.
- Specification:long 250cm*wide 5.5cm/98.4 inch*2.16inch.Quality 3M automotive tape will not be affected by wet or cold weather.D.I.Y Car Front Lip fearturing in curved design, slim, Can be stick on front or rear bumper, body kit, side skirt,universal for most cars.
- Made of durable and sturdy rubber.smooth and delicate cross-section,prevent scratches.flexible in use,Easy to bend,Have Excellent wear resistance.Bumper Lip completely fit with your bumper design.
- Easy to install: Clean the installation location, and then apply the adhesion and squeeze. The installation of the corner of the bumper needs to cut out a few triangles to fit the original car. The product pictures have installation drawings for reference. The car will fluctuate during driving. We recommend using self-tapping screws for reinforcement so as not to fall off. Equipped with screws to achieve better adhesion and fixation.
- carbon fiber front lip energy Give your car an aggressive , It prevents nasty collision scratches and provides protection Get an aggressive and lowered look---- make your car looks more sporty! One month warranty,case of damage or other reasons,please E-mail contact us, we will respond within 12 hours can do for you and arrange. Thank you very much for your order!
- See more on Amazon...
Brand: HENGJIA | Manufacturer: HengJia Auto Parts
Weight: 1.72 pounds
Warranty: 30 day
See On Amazon #4
TOMICOB 4Pcs Front Bumper Lip Chin Spoiler Splitter Diffuser Protector Air Dams with 2Pcs Adjustable 8"-11" Black Splitter Rods Compatible with Ford/Chevy/Honda/BMW/Toyota, Glossy Black Sharp Corner
Asin: B0C6149278 | Model: Air Dam | PartNumber: Air Dam
【Improving Appearance】Stereoscopic Design, Fluid Curve Surface With The Special Reinforcing Design On The Back Of The Spoiler. Dramatically Improves The Sporty Appearance And Enhance The Visual Effect. Perfectly Decorate Your Dear Car And Give Your Car A More Aggressive And Racing Appearance In A Minute..
【Fitment】Front Lip Body Kit Fits For Universal Cars, Such As, Compatible With Honda/Dodge/Ford/Chevy/Mitsubishi/V-W/Toyota/Kia/Bmw/Mercedes-Benz/Lexus/Acura/Infiniti/Audi/Subaru/Mazda..
【Easy To Install】Correct Connector No Cutting Or Splicing But Require: Drilling Holes Can Pre-Drilled / Marked On Item's Surface. 9-Hole Screw Positioning Makes Installation Easier And More Reliable. Professional Installation Is Highly Recommended. Application Of Double Sided Tape May Provide More Stability And Very Highly Recommended (However, Not Included Double Sided Tape.)..
【Well Protection】Provide Anti-Collision Protective Experience To Your Original Bumper, Protect From Scrapes From Driveways, Speed Bumps And Curbs, Alleviate The Damage. Reduce Wind Resistance, Prevent Your Cars From Collision And Alleviate Damage, And Protect Original Bumper From Road Bumps And Scratch..
Features
- High Quality Material Front lip made of updated ABS plastic, and splitter rod made of aluminum. Exquisite paint through strict quality control standards to build and test. Strict factory QC test, high quality guaranteed, durable and color will not fade out.
- Well Protection Provide anti-collision protective experience to your original bumper, protect from scrapes from driveways, speed bumps and curbs, alleviate the damage. Reduce wind resistance, prevent your cars from collision and alleviate damage, and protect original bumper from road bumps and scratch.
- Improving Appearance Stereoscopic design, fluid curve surface with the special reinforcing design on the back of the spoiler. Dramatically Improves the sporty appearance and enhance the visual effect. Perfectly decorate your dear car and give your car a more aggressive and racing appearance in a minute.
- Easy to Install Correct connector no cutting or splicing but require: Drilling holes can pre-drilled / marked on item's surface. 9-hole screw positioning makes installation easier and more reliable. Professional installation is highly recommended. Application of double sided tape may provide more stability and very highly recommended (However, NOT included double sided tape.).
- Fitment Front lip body kit fits for universal cars, such as, Compatible With Honda/Dodge/Ford/Chevy/Mitsubishi/V-W/Toyota/Kia/BMW/Mercedes-Benz/Lexus/Acura/Infiniti/Audi/Subaru/Mazda.
- See more on Amazon...
Brand: TOMICOB | Manufacturer: LIQI
Dimensions: 3.94 x 25.59 x 9.45 Inches
Warranty: NO
See On Amazon #5
Front Bumper Spoiler Lip 8.2ft/250cm Length Universal 2.5m Rubber Side Skirt Protector Cover, Car Front Bumper Guard Strip Air Dam Black
Asin: B08LQLDB9H | Model: BRUFR250-bk | PartNumber: BRUFR250-bk
Protect Your Vehicle From Curbs And Scrapes.
Bumper Spoiler Rubber Skirt, Anti-Scratch And Decorative.
Easy To Bend And Conform To The Shape Of The Bumper,Easy Installation And Good Adhesion.
Size: 8.2 Ft (250Cm) Length. Please Refer To The Photo Shown.
Features
- Front lip Universal for most cars, trucks, SUV with easy to use 2.5M automotive tape.
- Size: 8.2 FT (250cm) Length. Please refer to the photo shown
- Protect your vehicle from curbs and scrapes
- Easy to bend and conform to the shape of the bumper,Easy installation and good adhesion
- Bumper spoiler rubber skirt, anti-scratch and decorative
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
Dimensions: 0.80 x 2.00 x 1.00 inches
Warranty: No
See On Amazon #6
Xotic Tech 4x JDM Black Car Bumpers Trunk Fender Hatch Lids Quick Release Fasteners
Asin: B07CPLJ7RD | Model: . | PartNumber: . | Ean: 4794154993085
4 Pieces Steel Washers.
Universal Fit.
2 Pieces O-Rings.
4 Pieces Steel Locking Nuts With Screws.
Features
- One set (4 pieces) anodized aluminum finished quick release fasteners
- 4 pieces steel locking nuts with screws
- 4 pieces steel washers
- 2 pieces O-rings
- Universal fit
- See more on Amazon...
Brand: x xotic tech | Manufacturer: Xotic Tech Direct
Dimensions: 0.39 x 0.39 x 0.15 Inches | Weight: 0.20 Pounds
Warranty: 90 days
See On Amazon #7
Car Front Bumper Lip Splitter, 2.5m/8.2ft Front Lip Spoiler, Self-Adhesive Waterproof Auto Side Skirt Protector Strip, Universal Exterior Soft Rubber Decoration Accessories for Cars (Black)
Asin: B0BTM3BRXN | Model: Front Bumper Lip Splitter | PartNumber: Front Bumper Lip Splitter
【Diy Easy To Install】: It Can Be Bent And Folded Freely According To The Shape And Curvature Of The Car, And The Shape Is Quickly Restored. Clean The Installation Position, Tear Off The Protective Film On The Back Of The Adhesive Strip, And Then Press It For A While. If The Curvature Is Large, You Can Cut Out Several Triangles On The Strip To Fit Your Car. If You Are Worried About It Falling Off During Driving, You Can Reinforce It With Screws..
【Universal Fit】: This Car Crash Strip Is Easy To Bend, Cut And Fold. It Can Be Attached To The Front And Rear Bumpers, Side Skirts, Rear Wing And So On. The Length Can Be Adjusted To Suit Your Car. It Is Suitable For Vehicles Other Than Suvs, Vans. It Can Withstand Shocks And Collisions During Driving. If You Have Any Questions, Please Feel Free To Let Us Know..
【Carbon Fiber Decoration】: This Personalized Car Sticker Can Be Applied Anywhere You Want To Make Your Car Look More Sporty, Adding Style And Personality. Protect Your Car From Collision, Prevent The Front Bumper Against Lane Scraping, Speed Bumps And Stones On The Side Of The Road. With This Front Bumper Lip Splitter You Can Have A Safe Driving..
【Soft Feeling】: Car Front Lip Anti-Collision Strip Is Suitable For Most Cars, The Size Is 98.4 Inches * 2.6 Inches. You Can Glue It To The Front And Rear Bumpers Or Side Skirts Of The Car. This Premium Car Bumper Strip Will Not Be Affected By Wet Or Cold Weather, And Has Good Scratch And Decorative Features. It Makes The Car Look Better As Well As Protecting It From Scrapes..
Features
- Durable and Sturdy Rubber : High-quality rubber materials, carbon fiber texture surface, smooth and delicate, good flexibility. It adopts scientific design, lightweight foaming process, soft and not easy to deform. This car bumper crash strip fits perfectly into your bumper, is flexible to use, has excellent wear resistance, protects the car and reduces damage.
- Soft Feeling : Car front lip anti-collision strip is suitable for most cars, the size is 98.4 inches * 2.6 inches. You can glue it to the front and rear bumpers or side skirts of the car. This premium car bumper strip will not be affected by wet or cold weather, and has good scratch and decorative features. It makes the car look better as well as protecting it from scrapes.
- DIY Easy to Install : It can be bent and folded freely according to the shape and curvature of the car, and the shape is quickly restored. Clean the installation position, tear off the protective film on the back of the adhesive strip, and then press it for a while. If the curvature is large, you can cut out several triangles on the strip to fit your car. If you are worried about it falling off during driving, you can reinforce it with screws.
- Carbon Fiber Decoration : This personalized car sticker can be applied anywhere you want to make your car look more sporty, adding style and personality. Protect your car from collision, prevent the front bumper against lane scraping, speed bumps and stones on the side of the road. With this front bumper lip splitter you can have a safe driving.
- Universal Fit : This car crash strip is easy to bend, cut and fold. It can be attached to the front and rear bumpers, side skirts, rear wing and so on. The length can be adjusted to suit your car. It is suitable for vehicles other than SUVs, vans. It can withstand shocks and collisions during driving. If you have any questions, please feel free to let us know.
- See more on Amazon...
Brand: BELOMI | Manufacturer: BELOMI
Dimensions: 0.50 x 2.00 x 1.00 inches
Warranty: 0.2
See On Amazon #8
A Pair of Rear Bumper Lip Guards 17" DIY Car Exterior Decoration,Anti-Collision Body Parts&Trim for Diffuser Splitter,Blade Rear Shovel,Front Bumper Lip,Side Fender Skirt Lip (Black/2pcs)
Asin: B0BWMWNTD8 | Model: car bumper protector | PartNumber: car bumper protector
【Perfect Design】: Adopt The Most Durable Quality Pp, Clear And Delicate Texture, Scratch And Abrasion Resistant. With The One-Piece Streamline Cutting Design Reduced Wind Resistance,The Stability And Durability Are Guaranteed To The Maximum..
【Package】: You Will Receive 2 Car Rear Bumper Covers And The Required Screws, Which Need To Be Drilled To Attach To Your Bumper, Very Easy To Reap A Personalized Car Look In Minutes..
【Install Place】: This Car Side Skirt Cover Is Suitable For Car Rear Bumper, Blade Rear Shovel, Side Fender Skirt Lip Splitter, Most Of The Cars, Off-Road Vehicles, Trucks, Suvs Can Be Installed And Used..
【Car Exterior Decoration】: We Choose From A Wide Range Of Popular Colors And Minimalist Styles. Black And Carbon Fiber Are Already The Representatives Of Car Fashion,2 Styles Of Car Corner Bumper Guards Give You A New Visual Enjoyment..
Features
- DIY Car Body : Rear Bumper guards not only provide protection and effectively reduce impacts and scratches, they are also great if you want to enrich your car's appearance and show a unique sporty style.
- Car exterior decoration : We choose from a wide range of popular colors and minimalist styles. Black and carbon fiber are already the representatives of car fashion,2 styles of car corner bumper guards give you a new visual enjoyment.
- Perfect design : Adopt the most durable quality PP, clear and delicate texture, scratch and abrasion resistant. With the one-piece streamline cutting design reduced wind resistance,the stability and durability are guaranteed to the maximum.
- install place : This car side skirt cover is suitable for car rear bumper, blade rear shovel, side fender skirt lip splitter, most of the cars, off-road vehicles, trucks, SUVs can be installed and used.
- Package : You will receive 2 car rear bumper covers and the required screws, which need to be drilled to attach to your bumper, very easy to reap a personalized car look in minutes.
- See more on Amazon...
Brand: Turcee | Manufacturer: Turcee
Dimensions: 1.65 x 13.58 x 5.11 inches
Warranty: Warranty within 3 months
See On Amazon #9
Miytsya Pack-1 2.5M/8.2FT Car Front Lip, Front Bumper Lip, Carbon Lip, Side Skirt, Front Lip Spoiler Waterproof Protection, Universal Auto Parts (All Balck)
Asin: B0BGNWZ53M | Model: MIQCZS502BL-1PS | PartNumber: MIQCZS502BL-1PS
★ Function: Long 250Cm*Wide 5.5Cm/98.4 Inch*2.16Inch. High Quality 3M Automotive Tape Will Not Be Affected By Wet Or Cold Weather. D.I.Y Car Front Lip Fearturing In Curved Design, Slim. It Can Be Stick On Front Or Rear Bumper, Body Kit, Side Skirt, And Universal For Most Cars..
★ After Sale: If You Have Any Question On Use, Kindly Contact Us At Any Time Directly, We Will Solve The Problem For You Within 24 Hours On Weekdays..
★ Easy To Install: Clean The Installation Location, And Then Apply The Adhesion And Squeeze. The Installation Of The Corner Of The Bumper Needs To Cut Out A Few Triangles To Fit The Original Car..
★ Protect-Lip Function: To Provide An Elegant And Personalized Appearance. Front Bumper Guard Anti-Collision Protective,Protect From Scrapes From Driveways, Speed Bumps And Curbs. Protect Cars From Collision And Alleviate The Damage..
Features
- Best Material: Made of durable and sturdy rubber. Smooth and delicate cross-section. Pprevent scratches. Flexible in use. Easy to bend. Have excellent wear resistance. Bumper lip completely fit with your bumper design.
- Protect-Lip Function: To provide an elegant and personalized appearance. Front bumper guard anti-collision protective,protect from scrapes from driveways, speed bumps and curbs. Protect cars from collision and alleviate the damage.
- Function: Long 250cm*wide 5.5cm/98.4 inch*2.16inch. High quality 3M automotive tape will not be affected by wet or cold weather. D.I.Y car front lip fearturing in curved design, slim. It can be stick on front or rear bumper, body kit, side skirt, and universal for most cars.
- Easy to Install: Clean the installation location, and then apply the adhesion and squeeze. The installation of the corner of the bumper needs to cut out a few triangles to fit the original car.
- After Sale: If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays.
- See more on Amazon...
Brand: Miytsya | Manufacturer: Miytsya
Dimensions: 0.04 x 98.40 x 2.16 Inches
See On Amazon #10
ECOTRIC Black Universal Front Bumper Lip Chin Spoiler ABS Compatible with Audi,Ford,BMW,Honda,Chevrolet,Civic,Benz,Mazda,GMC Car
Asin: B07YWJ1ZD7
Function: This Front Bumper Lip Will Provide Some Protection For The Front Of The Vehicle From Debris On The Road, Also It Will Increase Downforce And Reduce Drag, Provide You With The Good Driving Feeling..
Installation: Direct Install With Screws. Professional Installation Is Highly Recommended..
Package Include: 1Pc Of Front Bumper Lip, We Will Offer You Mounting Accessories But No Instruction..
Material: Abs, Color:Black, Weight:1768G | Placement On Vehicle:Front;Lower, Fitment Type:Performance/Custom. Lightweight But Also Durable, Adapt To Any Weather And Condition, Not Easy To Damage..
Features
- Fitment: Compatible with Car Universal.(Please allow 1-3CM differs due to manual measurement.Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
- Material: ABS, Color:Black, Weight:1768g | Placement on Vehicle:Front;Lower, Fitment Type:Performance/Custom. Lightweight but also durable, adapt to any weather and condition, not easy to damage.
- Function: This front bumper lip will provide some protection for the front of the vehicle from debris on the road, also it will increase downforce and reduce drag, provide you with the good driving feeling.
- Package include: 1pc of front bumper lip, we will offer you mounting accessories but no instruction.
- Installation: Direct install with screws. Professional Installation Is Highly Recommended.
- See more on Amazon...
Brand: ECOTRIC | Manufacturer: ECOTRIC
Warranty: 60
See On Amazon #11
Xotic Tech 2pc Adjustable 8"-11" Front Bumper Lip Splitter Diffuser Strut Rod Tie Bars Splitter Support Rod Compatible with Most Vehicles [Red]
Asin: B0758XC7DX | Ean: 4794154973469
Elegant Surface And Exquisite Workmanship, Perfectly Decorate Your Dear Car, Always Shows Your Charming And Highlight Your Stylish Car..
Require Drilling Holes Into The Bumper Lip Diffuser To Attach Safely To The Vehicle..
Fitment: Compatible With Most Vehicles And Splitters Lip..
These Front Bumper Lip Support Rods Are Used To Reinforce Your Front Splitter Or Rear Diffuser. The Length Can Be Adjustable From 8" To 11"..
Features
- One pair (2 pieces) of Red front bumper lip splitter rod strut tie bar.
- These front bumper lip support rods are used to reinforce your front splitter or rear diffuser. The length can be adjustable from 8 to 11.
- Elegant surface and exquisite workmanship, perfectly decorate your dear car, always shows your charming and highlight your stylish car.
- Fitment: Compatible with Most Vehicles and Splitters Lip.
- Require drilling holes into the bumper lip diffuser to attach safely to the vehicle.
- See more on Amazon...
Brand: x xotic tech | Manufacturer: Xotic Tech Direct
Dimensions: 3.00 x 12.00 x 3.00 inches
Warranty: 90 days
See On Amazon #12
IKON MOTORSPORTS, Compatible with Most 62" - 66" Width Car, Adjustable A Style Front Bumper Lip Chin Splitter Spoiler Air Dam Carbon Fiber Print PP 3PCS
Asin: B083XNCWMZ | Ean: 0840110644745 | UPC: 840110644745
Package Contents: 1X Set Of Front Bumper Lip (3 Pieces In Total).
60 Days Limited Warranty.
Instructions Not Included, Professional Installation Is Highly Recommended..
Style: A Style | Material: Abs Plastic | Color: Carbon Fiber Hydro Dip (Gloss/Smooth Finish).
Features
- This products are suitable for Most Universal Cars. NOTE: Please check the size picture and measure the width of your car before buying.
- Style: A Style | Material: ABS Plastic | Color: Carbon Fiber Hydro Dip (Gloss/Smooth Finish)
- Package Contents: 1x Set of Front Bumper Lip (3 Pieces in Total)
- Instructions not included, Professional Installation is Highly Recommended.
- 60 Days Limited Warranty
- See more on Amazon...
Brand: IKON MOTORSPORTS
Weight: 15.00 Pounds
Warranty: 1 year
See On Amazon #13
Xotic Tech Front Bumper Lip Chin Spoiler Splitter Diffuser Protector Body Kit Compatible with Honda Accord Civic, Volkswagen MK5 MK6 MK7,Kia Optima,Mitsubishi Lancer, Black w/Red 4pcs
Asin: B098B13V3W
【Special Design】Diy Installation, Different Cool Style Reveal No Matter You Install The Detachable Red Spoiler Or Not. Stereoscopic Design, Fluid Curve Surface With The Special Reinforcing Design On The Back Of The Spoiler, Physically Strong Firm And Durable, Anti-Collision And Scratch-Resistant. Dramatically Improves The Sporty Appearance. Perfectly Decorate Your Dear Car And Give Your Car A More Aggressive And Racing Appearance In A Minute..
【Well Protection】Provide Anti-Collision Protective Experience To Your Original Bumper, Protect From Scrapes From Driveways, Speed Bumps And Curbs, Alleviate The Damage.(The Packaging Box Shown Is For Illustration Purposes Only, Actual Packaging May Vary).
【Function】The Function Of The Front Bumper Lip Is To Deflect The Oncoming Air. It Forces Maximum Air To Go Over The Top Of The Vehicle And Allows Only A Minimal Quantity Of Air To Pass Underneath The Vehicle To Improves Aerodynamic..
【Material】Made Of Updated Durable And Sturdy Abs With Carbon Fiber Pattern Coating Finished, Exquisite Paint Through Strict Quality Control Standards To Build And Test. No Deformation In Long-Term Use. No Deformation In Long-Term Use, Physically Strong Firm And Durable, Anti-Collision And Scratch-Resistant.
Features
- Before buying, please measure the size of the front bumper and check your cars inner mudguard fender to make sure there is space to install (drilling) the front bumper splitter. (As a reference, 70.9" bumper width can fit). Note that the following cases are not applicable: if the original car have a front lip installed, the bottom of the front bumper is not flat enough or the front is too sharp.
- Material Made of updated durable and sturdy ABS with carbon fiber pattern coating finished, exquisite Paint through strict quality control standards to build and test. No deformation in long-term use. no deformation in long-term use, physically strong firm and durable, anti-collision and scratch-resistant
- Special Design DIY installation, different cool style reveal no matter you install the detachable Red spoiler or not. Stereoscopic design, fluid curve surface with the special Reinforcing Design on the back of the spoiler, physically strong firm and durable, anti-collision and scratch-resistant. Dramatically Improves The Sporty Appearance. Perfectly decorate your dear car and give your car a more aggressive and racing appearance in a minute.
- Function The function of the front bumper lip is to deflect the oncoming air. It forces maximum air to go over the top of the vehicle and allows only a minimal quantity of air to pass underneath the vehicle to improves aerodynamic.
- Well Protection Provide anti-collision protective experience to your original bumper, protect from scrapes from driveways, speed bumps and curbs, alleviate the damage.(The packaging box shown is for illustration purposes only, actual packaging may vary)
- See more on Amazon...
Brand: x xotic tech | Manufacturer: Xotic Tech Direct
Warranty: 90 day
See On Amazon #14
Xotic Tech Universal Car Side Skirt Rocker Panel Extension Left/Right Lower Side Skirts Splitters Diffuser Winglet Wings Body Kit Fits Universal Vehicles 29" (Gloss Black) 2PCs
Asin: B08Z7712KQ | Ean: 0827154535291 | UPC: 827154535291
Excellent Design: It Is Not Only For Protecting Your Car Exterior Side Skirts From Scratches But Also For Giving It More Stylish Outlook To Make It Unique And Appealing. Not Easy To Break. It Can Also Boost Fuel Mileage And Allow Your Car Reduce Fuel Consumption. Improves Vehicle Stability During Fast Travelling. Prevents Scratches On Driveways, Speed Bumps And Kerbs. Even The Side Skirts Make Your Car Look Lower To The Ground But It Will Not Affect Road Passing..
Installation: Use Double Side Adhesive Tape Or Drill Holes And Bolt On To Your Bumper. (Double Side Tape Is Not Included). Professional Installation Is Highly Recommended. Vehicle Compatible Shows "Fit" Because They Are Universal. Please Check Item Specification Image And Cutting/Drilling Might Be Required During Installation.(The Packaging Box Shown Is For Illustration Purposes Only, Actual Packaging May Vary).
Features: Elegant Surface And Exquisite Workmanship, Perfectly Decorate Your Dear Car, Always Shows Your Charming And Highlight Your Dear Car. Good Heat Resistance, Impact Resistance And Weather Resistance. Enjoy The Super Cool And Exquisite Appearance Of Your Car After Installing..
Material: Made Of High Grade Abs Material, Which Is Durable And Lightweight Also Enough To Prevent Cracking With Gloss Powder-Coated Finish With An Easy Bolt-On Underneath Installation (Screws Included).
Features
- Model: Compatible with Most Cars. (Please check the size you need before purchasing)
- Material: Made of high grade ABS material, which is durable and lightweight also enough to prevent cracking with gloss powder-coated finish with an easy bolt-on underneath installation (Screws included)
- Excellent Design: It is not only for protecting your car exterior side skirts from scratches but also for giving it more stylish outlook to make it unique and appealing. Not easy to break. It can also boost fuel mileage and allow your car reduce fuel consumption. Improves vehicle stability during fast travelling. Prevents scratches on driveways, speed bumps and kerbs. Even the side skirts make your car look lower to the ground but it will not affect road passing.
- Features: Elegant surface and exquisite workmanship, perfectly decorate your dear car, always shows your charming and highlight your dear car. Good heat resistance, impact resistance and weather resistance. Enjoy the super cool and exquisite appearance of your car after installing.
- Installation: Use double side adhesive tape or drill holes and bolt on to your bumper. (Double side tape is not included). Professional installation is highly recommended. Vehicle compatible shows FIT because they are universal. Please check item specification image and cutting/drilling MIGHT be required during installation.(The packaging box shown is for illustration purposes only, actual packaging may vary)
- See more on Amazon...
Brand: x xotic tech | Manufacturer: Xotic Tech Direct
Warranty: 1 year
See On Amazon #15
Xotic Tech 9Pcs Front Bumper Lip Chin Spoiler + Side Skirt Winglets Diffuser + Rear Bumper Canard Splitter Car Body Kits + Black Adjustable 10"-13" Support Rods Universal Fit Most Vehicles
Asin: B0CLZD5G41
Car Body Kit Material: Made Of Updated Durable And Sturdy Abs Plastic, No Deformation In Long-Term Use, Physically Strong Firm And Durable, Anti-Collision And Scratch-Resistant..
Note: Professional Installation Is Highly Recommended. Product May Require Drilling Holes And Use The Screws To Permanently Secure..
Function:Provide An Elegant And Personalized Appearance, Provide Anti-Collision Protective Experience To Your Original Bumper, Protect From Scrapes From Driveways, Speed Bumps And Curbs, Alleviate The Damage..
Compatibility: Universal Fit Most Vehicle. Please Measure And Check The Position You Are Going To Install The Spoiler, And Make Sure These Splitters Will Fit Your Vehicle Before Purchase..
Features
- Body Kit Included: (3pcs) Front Bumper Lip Chin Spoiler Guard + Side Skirt Splitter (2pcs) + Rear Bumper Lip Wrap Splitter Canard (2pcs) + Support Rod (2pcs)
- Compatibility: Universal fit most vehicle. Please measure and check the position you are going to install the spoiler, and make sure these splitters will fit your vehicle before purchase.
- Car Body Kit Material: Made of updated durable and sturdy ABS plastic, no deformation in long-term use, physically strong firm and durable, anti-collision and scratch-resistant.
- Function:Provide an elegant and personalized appearance, provide anti-collision protective experience to your original bumper, protect from scrapes from driveways, speed bumps and curbs, alleviate the damage.
- Note: Professional installation is highly recommended. Product may require drilling holes and use the screws to permanently secure.
- See more on Amazon...
Brand: x xotic tech | Manufacturer: Xotic Tech Direct
See On Amazon #16
TOMICOB 2Pcs Adjustable 8"-11" Splitter Strut Rods, Automotive Front Lip Strut Rod Bumper Splitter Universal Tie Support Bars Fit for Most Cars (Red)
Asin: B09TR79RP4 | Model: splitter rods | PartNumber: splitter rods
🚗Front Splitter Rods --- The Automotive Replacement Strut Rods Are Used To Reinforce Your Front Splitter Or Rear Diffuser. Support Rods Will Support Your Vehicle Bumper Lip Splitter Stronger And Awesome Eye-Catching Look..
🚗Splitter Support Rods --- If You Have Any Question On Use About Our Aluminum Splitter Support Rods, Kindly Contact Us At Any Time Directly, We Will Solve The Problem For You Within 24 Hours, Thank You..
🚗Car Strut Rod --- Our Car Strut Rods Are Universal Fit For Most Cars, Suvs, Trucks. Rod Not Only Improves The Exquisiteness Of The Body Components, But Also Prevents The Components From Falling Off Abnormally..
🚗Strut Rods --- These Front Splitter Support Rods Are Strength And Durability, When The Car Is Running At High Speed After Installation, There Will Be No Hidden Danger Between The Front Lip And The Car..
Features
- Splitter Rods --- Adjustable splitter support rods made of aluminum, adjustable 8" to 11" inch length; Color: blue; Set of 2pcs. Rods' articulated top and bottom joints could be installed at any angle.
- Strut Rods --- These front splitter support rods are strength and durability, when the car is running at high speed after installation, there will be no hidden danger between the front lip and the car.
- Front Splitter Rods --- The automotive replacement strut rods are used to reinforce your front splitter or rear diffuser. Support rods will support your vehicle bumper lip splitter stronger and awesome eye-catching look.
- Car Strut Rod --- Our car strut rods are universal fit for most cars, suvs, trucks. Rod not only improves the exquisiteness of the body components, but also prevents the components from falling off abnormally.
- Splitter Support Rods --- If you have any question on use about our aluminum splitter support rods, kindly contact us at any time directly, we will solve the problem for you within 24 hours, thank you.
- See more on Amazon...
Brand: TOMICOB | Manufacturer: LIQI
Dimensions: 0.40 x 3.15 x 0.80 inches | Weight: 0.31 Pounds
See On Amazon #17
Xotic Tech Front Bumper Lip Spoiler + Side Skirt Splitter + Rear Bumper Lip Wrap Splitter Canard,Compatible with Honda Civic Accord Acura Integra (Black)
Asin: B0BQ2TQ3M9
Function:Provide An Elegant And Personalized Appearance, Provide Anti-Collision Protective Experience To Your Original Bumper, Protect From Scrapes From Driveways, Speed Bumps And Curbs, Alleviate The Damage.
Note:1.Please Measure The Position You Are Going To Install The Package, And Make Sure These Splitters Will Fit Your Vehicle Before Purchase 2.Professional Installation Is Highly Recommended 3.Product May Require Drilling Holes And Use The Screws To Permanently Secure..
Compatibility:Perfect Compatible With Honda Civic Accord Acura Integra,It Won't Scrape The Paint Off Or Damage The Original Equipment. Enjoy The Super Cool And Exquisite Appearance Of Your Car After Installing..
Material:Made Of Updated Durable And Sturdy Abs, No Deformation In Long-Term Use,Waterproof And Never Fade..
Features
- Package includes:1 set of Front Bumper Lip Chin Spoiler Guard Body Kits (3pcs) + Side Skirt Splitter (2pcs) + Rear Bumper Lip Wrap Splitter Canard (2pcs)
- Material:Made of updated durable and sturdy ABS, no deformation in long-term use,waterproof and never fade.
- Function:Provide an elegant and personalized appearance, provide anti-collision protective experience to your original bumper, protect from scrapes from driveways, speed bumps and curbs, alleviate the damage
- Compatibility:Perfect compatible with Honda Civic Accord Acura Integra,It won't scrape the paint off or damage the original equipment. Enjoy the super cool and exquisite appearance of your car after installing.
- Note:1.Please measure the position you are going to install the package, and make sure these splitters will fit your vehicle before purchase 2.Professional installation is highly recommended 3.Product may require drilling holes and use the screws to permanently secure.
- See more on Amazon...
Brand: x xotic tech | Manufacturer: Xotic Tech Direct
Warranty: 90 day
See On Amazon #18
Xotic Tech JDM Rear Bumper Canard Diffuser Splitter Valence Spoiler Fin Lip Trim Universal Fit (Carbon Fiber Pattern) 4.48"x17.63"
Asin: B089VVLRLV | Ean: 0827154526213 | UPC: 827154526213
🚘These Lower Bumper Lip Canards Deflector Will Protect Your Car Rear Bumper From Scratches And Small Damages, Meanwhile, Give Your Vehicle A Racing Sporty Look..
🚘Designed For All Cars, Off-Roads, Suvs, Trucks..
🚘You Could Drill Holes And Bolt Them On To Your Car Bumper Or Use Double-Sided Tape To Adhere Them..
🚘Made Of Premium Quality Abs Material With Carbon Fiber Pattern Coating; Light, Anti-Corrosion, Rust Resistant And Never Fade..
Features
- Pair of rear bumper lip wrap angle splitters with 6 pieces of mounting screws for both left and right sides.
- Made of premium quality ABS material with carbon fiber pattern coating; light, anti-corrosion, rust resistant and never fade.
- These lower bumper lip canards deflector will protect your car rear bumper from scratches and small damages, meanwhile, give your vehicle a racing sporty look.
- You could drill holes and bolt them on to your car bumper or use double-sided tape to adhere them.
- Designed for all cars, off-roads, SUVs, trucks.
- See more on Amazon...
Brand: x xotic tech | Manufacturer: Xotic Tech Direct
Dimensions: 1.00 x 17.63 x 4.48 inches
Warranty: 60 day
See On Amazon #19
x xotic tech 2X Front Bumper Lip Splitter Spoilers Protector Corner Edge Guard Cover Trim Compatible with Dodge Challenger SRT, R/T Scat Pack 2015-2023, R/T, GT 2019-2023 (Not fit R/T Plus, SXT) Pink
Asin: B0CBPBK5F8
This Item Is Made Of Premium Light-Weight Abs Plastic With Pink Surface And It Will Give Your Car A Unique Look And A Sleek, Smooth Touch..
Easy To Install, There Is No Drilling Or Cutting Required..
Will Dramatically Improve The Sporty Appearance For Your Car And Prevent Your Car From Scratch And Abrasion..
Compatible With Dodge Challenger R/T Scat Pack 2015-2023, Srt 392 ,392 Hemi Scat Pack Shaker 2015-2018 And R/T Gt 2019-2023, Not For R/T Plus, Sxt And All Widebody. Replace Part Number: 68327082Aa,68327083Aa.
Features
- 2 pieces of High quality ABS plastic Front Bumper Lip Splitter Protector Trims
- Compatible With Dodge Challenger R/T Scat Pack 2015-2023, SRT 392 ,392 Hemi Scat Pack Shaker 2015-2018 and R/T GT 2019-2023, not for R/T Plus, SXT and all Widebody. Replace Part Number: 68327082AA,68327083AA
- This item is made of premium Light-weight ABS plastic with Pink surface and it will give your car a unique look and a sleek, smooth touch.
- Will dramatically improve the Sporty Appearance for your car and prevent your car from scratch and abrasion.
- Easy to install, there is no drilling or cutting required.
- See more on Amazon...
Brand: x xotic tech | Manufacturer: Xotic Tech Direct
See On Amazon #20
WeFoonLo Universal Car Front Bumper Spoiler Rubber Sticker Lip Splitter Body Skirt Protector, 2.5M/8.2ft (Black)
Asin: B075JP6C6P | Model: 2.5M | PartNumber: 2.5M | Ean: 0748440436705 | UPC: 748440436705
Easy Installation: Come With Quality 3M Automotive Tape, Requires No Special Skills Or Tools; Can Stick It On Front Or Rear Bumper, Body Kit, Side Skirt, Tail Fins And So On.
Multi-Function: Reduce The Reversing Flow When Car Driving, Increasing The Down Force Of The Car Make The Car More Stable For Reducing Fuel Consumption.
Wide Application: Length: 2.5M/8.2Ft, Width: 60Mm/2.4Inch, Universal Fit For Most Cars, Trucks, Suvs, Length Is Adjustable To Your Cars.
Durable & Bendable: Guard Protection Bumper Spoiler Rubber Skirt, Anti-Scratch And Decorative, Allows You To Install This Lip On The Lower Bumper.
Features
- High Quality: Flexible TPVC material, smooth and delicate cross-section, protect cars from collision and alleviate the damage
- Durable & Bendable: Guard protection bumper spoiler rubber skirt, anti-scratch and decorative, allows you to install this lip on the lower bumper
- Easy Installation: Come with quality 3M automotive tape, requires no special skills or tools; Can stick it on front or rear bumper, body kit, side skirt, tail fins and so on
- Wide Application: Length: 2.5M/8.2ft, Width: 60mm/2.4inch, universal fit for most cars, trucks, SUVs, Length is adjustable to your cars
- Multi-function: Reduce the reversing flow when car driving, increasing the down force of the car make the car more stable for reducing fuel consumption
- See more on Amazon...
Brand: WeFoonLo | Manufacturer: Wefond
Warranty: Manufacturer warranty for 90 days from date of purchase
See On Amazon
Looking For Something Else?
Search