OTC Tools 503052 Forcing Screw For Hub Tamer
Asin: B0B38LCLK2
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Manufacturer Part Number: 503052.
Brand: OTC | Manufacturer: OTC
See On Amazon Similar To OTC Tools 503052 Forcing Screw
#1
OTC 6024 Crankshaft Positioning Tool for Ford, Black
Asin: B000F5ECRM | Model: 6024 | PartNumber: 6024 | Ean: 0731413032554, 0799621067768 | UPC: 799621067768, 731413032554
Preventing Timing Misalignment On These 'Interference' Design Ford Engines Is Critical As Valves Will Contact Pistons If Timing Chain Is Installed In An Incorrect Position, Resulting In Severe Damage.
Otc Recommends (But Does Not Require) That The No. 6024 Crankshaft Alignment Tool Be Used With Nos. 6009 And 6020 Camshaft Alignment Tools To Safeguard Alignment When Servicing Cams Or Chains.
Simply Install Crankshaft Positioning Tool Over Crankshaft Snout (Aligning Crankshaft Woodruff Key With Keyway On Tool) And Engine Front Cover Alignment Dowel To Correctly Position Crank At Tdc.
Handy Tool Prevents Accidental Movement Of The Crankshaft When Doing Camshaft Or Timing Chain Service Or Installation On These 'Interference' Engines.
Features
- OTC Crankshaft Positioning Tool for use on 1993 and newer Ford 4.2L V6; 4.6L 2 valve and 4.6L 4-valve V8, 5.4L V8, and 6.8L V10 engines - same as Ford No. 303-448
- Handy tool prevents accidental movement of the crankshaft when doing camshaft or timing chain service or installation on these 'interference' engines
- Preventing timing misalignment on these 'interference' design Ford engines is critical as valves will contact pistons if timing chain is installed in an incorrect position, resulting in severe damage
- Simply install crankshaft positioning tool over crankshaft snout (aligning crankshaft woodruff key with keyway on tool) and engine front cover alignment dowel to correctly position crank at TDC
- OTC recommends (but does not require) that the No. 6024 Crankshaft Alignment Tool be used with Nos. 6009 and 6020 Camshaft alignment tools to safeguard alignment when servicing cams or chains
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.50 x 7.75 x 4.25 inches | Weight: 0.70 pounds
Warranty: LIFETIME
See On Amazon #2
OTC (7503) Tie Rod/inner bearing race puller Remover
Asin: B0002SRGTI | Model: 7503 | PartNumber: 7503 | Ean: 0731413011344 | UPC: 731413011344
Up To 5 Tons Of Force Can Be Applied.
Features
- Works on FWD and RWD import and domestic vehicles
- Up to 5 tons of force can be applied
- See more on Amazon...
First Available: 11/14/2007
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 2.50 x 12.00 x 6.00 inches | Weight: 2.65 Pounds
Warranty: Limited lifetime warranty
See On Amazon #3
OTC 6667 Harmonic Damper Puller
Asin: B000P6UT2I | Model: 6667 | PartNumber: 6667 | Ean: 0731413545085 | UPC: 731413545085
Country Of Manufacturer: Taiwan.
Package Dimensions: 8.9" L X 6.2" W X 2.2" H.
Manufacturer: Otc.
Features
- Hand Tools
- Manufacturer: Otc
- Country of Manufacturer: Taiwan
- Package Dimensions: 8.9 L x 6.2 W x 2.2 H
- See more on Amazon...
Brand: OTC | Manufacturer: Otc
Dimensions: 6.00 x 8.75 x 2.20 inches | Weight: 0.00 pounds
Warranty: Limited lifetime warranty
See On Amazon #4
OTC 4531 Harmonic Balancer Puller and Installer Set
Asin: B000F5LIW4 | Model: 4531 | PartNumber: 4531 | Ean: 0777780969451, 0731413039386 | UPC: 777780969451, 731413039386
For Easy Removal And Installation Of Most Harmonic Balancers And Drive Pulleys Which Are Press-Fitted Onto The Crank-Shaft..
Auto_Accessory.
Features
- For easy removal and installation of most harmonic balancers and drive pulleys which are press-fitted onto the crank-shaft.
- AUTO_ACCESSORY
- For easy removal and installation of most harmonic balancers and drive pulleys which are press-fitted onto the crank-shaft.
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.90 x 13.00 x 10.00 inches | Weight: 8.70 Pounds
Warranty: 1 year manufacturer
See On Amazon #5
OTC 4517 Stinger 7-Ton Bar-Type Puller/Bearing Separator Set
Asin: B002BHVZ5O | Model: 4517 | PartNumber: 4517 | Ean: 0731413547195, 0069060364385 | UPC: 731413547195, 069060364385
Bearing Splitter With 4 Inch Capacity.
8 Inch Bar Type Puller Head Mated With A Custom Thread Forcing Screw.
Two Sets Of Hex Push Puller Legs.
Up To 7 Tons Of Force And Greater Reach - From 8 Inches To 16 Inches.
Features
- Now service and maintenance professionals have a puller/bearing set for tough jobs
- Up to 7 tons of force and greater reach - from 8 inches to 16 inches
- Bearing splitter with 4 inch capacity
- Two sets of hex push puller legs
- 8 inch bar type puller head mated with a custom thread forcing screw
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 5.00 x 17.50 x 14.50 inches | Weight: 19.80 Pounds
Warranty: Limited lifetime warranty
See On Amazon #6
OTC Tools 5870-1 Injector Height Gauge for Setting Injector Timing on Detroit Diesel 2-Cycle 53, 71, and 92 Engines - 1.460"
Asin: B082VCDJLD | Model: 5870-1 | PartNumber: 5870-1 | Ean: 0731413590535 | UPC: 731413590535
Crafted From High-Grade Materials To Ensure Quality Performance Over The Lifetime Of The Tool.
Made In The Usa.
Similar To J-1853.
For Use On Detroit Diesel 2-Cycle 53, 2-Cycle 71, And 2-Cycle 92 Engines.
Features
- OTC's Injector Height Gauge is used to set injector height to 1.460 inches (37.08 mm) for proper injector timing
- For use on Detroit Diesel 2-cycle 53, 2-cycle 71, and 2-cycle 92 engines
- Crafted from high-grade materials to ensure quality performance over the lifetime of the tool
- Similar to J-1853
- Made in the USA
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 1.00 x 5.00 x 4.00 inches
Warranty: Per Contract with Amazon
See On Amazon #7
OTC 6533 Separator Tool
Asin: B000RGLCFE | Model: 6533 | PartNumber: 6533 | Ean: 0731413040979 | UPC: 731413040979
Also A Separating Tool For Tie Rods On Medium And Heavy-Duty Trucks.
11-5/8" Long With A 1-7/16" Fork Spread.
Works As A Pitman Arm Wedge On Light Trucks.
It Will Remove Camber Adjustment Sleeves On Ford Pickups That Have An Adjustable Camber.
Features
- This handy tool is multipurpose
- It will remove camber adjustment sleeves on Ford pickups that have an adjustable camber
- Also a separating tool for tie rods on medium and heavy-duty trucks
- Works as a pitman arm wedge on light trucks
- 11-5/8 long with a 1-7/16 fork spread
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.00 x 14.70 x 4.30 inches | Weight: 2.00 Pounds
Warranty: Limited lifetime warranty
See On Amazon #8
OTC 4244 Freightliner Rear Suspension Bushing Tool
Asin: B008VPO2PK | Model: 4244 | PartNumber: 4244 | Ean: 0731413563133 | UPC: 731413563133
Completes The Job In A Fraction Of The Time That Traditional Methods Take.
No More Hammering Prevents Impact Damage To Suspension Components While Dramatically Reducing The Effort Required By The Technician Performing The Work.
Saves An Average Of 45 Minutes Per Bushing (4 Per Vehicle) On Flat Rate Of 1.5 Hours Per Bushing - A Huge Time Savings.
Removes And Installs Single-Wrapped Fas Ii Airliner Freightliner Rear Suspension Bushings 'On Vehicle' - No Need To Remove The Spring Assemblies To Use This Tool.
Features
- OTC's Freightliner Rear Suspension Tool features a robust 15-Ton capacity cylinder and installation/removal adapters
- Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool
- Completes the job in a fraction of the time that traditional methods take
- Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings
- No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work
- See more on Amazon...
First Available: 01/30/2013
Brand: OTC | Manufacturer: OTC
Dimensions: 3.00 x 28.00 x 8.00 inches | Weight: 50.00 Pounds
Warranty: Lifetime Limited Warranty
See On Amazon #9
OTC 1027 5-Ton Reversible Jaw 'Grip-O-Matic' Puller - Long 2/3 Jaw (Mechanical) Silver
Asin: B0002SRGCU | Model: 1027 | PartNumber: 1027
Ean: 0013438028294, 0080850301342, 0617390879668, 0069060272215, 0731413010279, 0642008199913, 0031113165300
UPC: 080850301342, 617390879668, 069060272215, 013438028294, 031113165300, 731413010279, 642008199913
Maximum Reach - 5-1/2 Inches; Maximum Spread - 7 Inches.
Center Screw Size - 9/16-20 X 6-15/16 Inches Long.
Upper Jaw Thickness - 5/16 Inch, Lower Jaw Thickness - 1/4 Inch; Upper Jaw Width - 3/8 Inch, Lower Jaw Width - 3/4 Inch.
Forged From Quality Steel, Heat Treated, And Subjected To Rigorous Tests Which Exceed The Rated Capacity.
Features
- OTC's 5-ton capacity, long 2/3-jaw, reversible gear and bearing puller is easily configurable as either a 2 or 3 jaw puller enabling you to remove and install a wider variety of parts for fast, effective repairs
- Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
- Maximum reach - 5-1/2 inches; maximum spread - 7 inches
- Upper jaw thickness - 5/16 inch, lower jaw thickness - 1/4 inch; upper jaw width - 3/8 inch, lower jaw width - 3/4 inch
- Center screw size - 9/16-20 x 6-15/16 inches long
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 10.00 x 7.50 x 6.00 inches | Weight: 0.14 pounds
Warranty: Lifetime
See On Amazon #10
OTC 503052 Screw
Asin: B00946NA2Q | Model: 503052 | PartNumber: 503052 | Ean: 0731413175855 | UPC: 731413175855
Brand: OTC | Manufacturer: OTC
Dimensions: 1.20 x 8.30 x 1.20 inches | Weight: 1.00 Pounds
See On Amazon #11
OTC OTC523410 Equalizing Washer Set, 2 Pack
Asin: B07H71Y87R | Model: OTC523410 | PartNumber: OTC523410 | Ean: 0731413194412 | UPC: 731413194412
Manufactured In United States.
Otc Is A Major Manufacturer And Supplier Of Vehicle Electronic Diagnostic Equipment And More.
Features
- OTC is a major manufacturer and supplier of professional vehicle Electronic diagnostic equipment, Automotive fuel maintenance
- OTC is a major manufacturer and supplier of vehicle Electronic diagnostic equipment and more
- Manufactured in United States
- See more on Amazon...
First Available: 09/09/2018
Brand: OTC | Manufacturer: OTC
Dimensions: 0.40 x 1.60 x 1.60 Inches | Weight: 0.15 pounds
See On Amazon #12
OTC 5072 Lucas Girling Rear Brake Adjusting Tool - Ford F700, F800, F900
Asin: B000F5LISS | Model: 5072 | PartNumber: 5072 | Ean: 0731413027093 | UPC: 731413027093
Lucas Girling Brakes Are Popular On Ford F700, F800, And F900 Series Trucks.
Lifetime Limited Warranty.
High-Grade Materials Ensure Quality Performance Over The Lifetime Of The Tool.
Tool's Offset Design And Extra Handle Length Gets The Job Done Quickly.
Features
- OTC's Lucas Girling Rear Brake Adjusting Tool enables you to easily adjust rear Lucas Girling hydraulic brake systems
- Tool's offset design and extra handle length gets the job done quickly
- Lucas Girling brakes are popular on Ford F700, F800, and F900 series trucks
- High-grade materials ensure quality performance over the lifetime of the tool
- Lifetime limited warranty
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.30 x 18.00 x 6.00 inches | Weight: 0.80 Pounds
Warranty: Limited lifetime warranty
See On Amazon #13
OTC 1025 5-Ton Reversible Jaw 'Grip-O-Matic' Puller - Long 2 Jaw (Mechanical)
Asin: B0002SRFP8 | Model: 1025 | PartNumber: 1025 | Ean: 0731413010255 | UPC: 731413010255
Maximum Reach - 5-1/2 Inches; Maximum Spread - 6 Inches.
Center Screw Size - 9/16-20 X 6-15/16 Inches Long.
Upper Jaw Thickness - 5/16 Inch, Lower Jaw Thickness - 1/4 Inch; Upper Jaw Width - 3/8 Inch, Lower Jaw Width - 3/4 Inch.
Forged From Quality Steel, Heat Treated, And Subjected To Rigorous Tests Which Exceed The Rated Capacity.
Features
- OTC's 5-ton capacity, long 2-jaw, reversible gear and bearing puller enables you to remove and install parts for fast, effective repairs
- Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
- Maximum reach - 5-1/2 inches; maximum spread - 6 inches
- Upper jaw thickness - 5/16 inch, lower jaw thickness - 1/4 inch; upper jaw width - 3/8 inch, lower jaw width - 3/4 inch
- Center screw size - 9/16-20 x 6-15/16 inches long
- See more on Amazon...
First Available: 11/14/2007
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 2.20 x 11.80 x 5.80 inches | Weight: 2.50 Pounds
Warranty: Limited lifetime warranty
See On Amazon #14
OTC Tools 5190A Heavy Duty U-Joint Puller for Use on Class 7 and 8 Trucks
Asin: B00UF4L9BU | Model: 5190A | PartNumber: 5190A | Ean: 0731413577536 | UPC: 731413577536
Smooth, Crisp Threads Allows For A Lower, More Consistent Effort To Rotate Shaft; Will Not Damage The Driveshaft, Yoke, Bearing Cups, Or Joints.
Fits Spicer Driveline 1610, 1710, 1760, 1810, 1880; Spicer Spl 140, 170, And 250 'Life Series'; Meritor (Rockwell) 16N, 17N, 18N, 1710; Meritor Rpl 20 And 25 'Permalube' Series.
Major Tool Components Are Heat Treated For Improved Strength And Durability, Ensuring A Long, Productive Service Life.
Large Diameter Threaded Shaft Can Handle U-Joints That Are Severly Seized Due To Corrosion And Require More Force To Disassemble.
Features
- Ideal tool for removing Heavy-Duty driveline U-Joints on Class 7 and 8 Trucks in conjunction with up to a 1 inch impact wrench (not included) - without the need for heat or hammering
- Large diameter threaded shaft can handle U-joints that are severly seized due to corrosion and require more force to disassemble
- Smooth, crisp threads allows for a lower, more consistent effort to rotate shaft; will not damage the driveshaft, yoke, bearing cups, or joints
- Major tool components are heat treated for improved strength and durability, ensuring a long, productive service life
- Fits Spicer driveline 1610, 1710, 1760, 1810, 1880; Spicer SPL 140, 170, and 250 'Life Series'; Meritor (Rockwell) 16N, 17N, 18N, 1710; Meritor RPL 20 and 25 'Permalube' series
- See more on Amazon...
First Available: 06/06/2015
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 5.00 x 12.00 x 9.00 inches | Weight: 11.40 pounds
Warranty: 1 year manufacturer
See On Amazon #15
OTC 7393 Gear and Pulley Puller with 5-1/2" Long Forcing Screw
Asin: B000P6UNW4 | Model: 7393 | PartNumber: 7393 | Ean: 0971473168460, 0731413001406 | UPC: 971473168460, 731413001406
Puller Block Is 4-7/8 Inches Wide.
High-Grade Materials Ensure Quality Performance Over The Lifetime Of The Tool.
5-1/2 Inch Long Center Screw; Includes 2 Ea. 3/8-16 X 3 Inch Long Hex Head Cap Screws.
Puller Features A Spread Of 1-1/2 Inches To 4-1/4 Inches.
Features
- OTC's 7393 Gear and Pulley Puller is perfect for removing timing gears, fan pulleys, harmonic balancers, and many other parts having tapped holes
- Puller features a spread of 1-1/2 inches to 4-1/4 inches
- Puller block is 4-7/8 inches wide
- 5-1/2 inch long center screw; includes 2 ea. 3/8-16 x 3 inch long hex head cap screws
- High-grade materials ensure quality performance over the lifetime of the tool
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 7.60 x 2.70 x 1.70 Inches | Weight: 1.60 Pounds
Warranty: Limited lifetime warranty
See On Amazon #16
OTC Tools 5889 Rocker Arm Shaft Socket for Detroit Diesel Series 60 Engines
Asin: B07ZRPZLCS | Model: 5889 | PartNumber: 5889 | Ean: 0731413590320 | UPC: 731413590320
Applications Include Detroit Diesel Series 60 Engines.
Similar To J-44706; Made In The Usa.
Specifications: 12Mm, 12Pt Socket; 1/2 Inch Square Drive; High-Strength, Heat Treated Steel Construction.
Specially Designed Socket Features A Stepped Outside Diameter For Proper Clearance And Access To The Fastener.
Features
- OTC's Rocker Arm Shaft Socket is a deep-well 12mm socket used to torque rocker arm nuts to OE specification
- Specially designed socket features a stepped outside diameter for proper clearance and access to the fastener
- Applications include Detroit Diesel Series 60 engines
- Specifications: 12mm, 12pt socket; 1/2 inch square drive; High-strength, heat treated steel construction
- Similar to J-44706; Made in the USA
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.25 x 2.25 x 4.75 inches | Weight: 0.45 Pounds
Warranty: Per Contract with Amazon
See On Amazon #17
OTC Puller Set, 11 Pieces, Multipurpose, 2 Jaws - 4532
Asin: B002TYT4JS | Model: 4532 | PartNumber: 4532 | Ean: 0731413549304, 0080850337198 | UPC: 080850337198, 731413549304
Features A Classic 'H Bar' Style Puller Block Accommodating A 7 Inch To 11 Inch Application Spread.
Tempered For Heavy-Duty Applications ; Durable Blow-Molded Storage Case Keeps Tools Contained And Organized So They Are Ready When You Need Them.
Comes With 2 Sets Of Forged Jaws For A Pulling Reach Range Of 5 Inches To 9 Inches; Two Forcing Screws Are Included For Short And Long Pulls.
Great Solution For Many Applications Like: Heavy-Duty Pinion Bearings, Side Bearings, Alternators, Generators, Power Steering And Crankshaft Pulleys, Timing Gears, Harmonic Balancers, And More.
Features
- Push puller is the best pulling choice when threaded holes are not available
- Great solution for many applications like: heavy-duty pinion bearings, side bearings, alternators, generators, power steering and crankshaft pulleys, timing gears, harmonic balancers, and more
- Features a classic 'H Bar' style puller block accommodating a 7 inch to 11 inch application spread
- Comes with 2 sets of forged jaws for a pulling reach range of 5 inches to 9 inches; two forcing screws are included for short and long pulls
- Tempered for heavy-duty applications ; durable blow-molded storage case keeps tools contained and organized so they are ready when you need them
- See more on Amazon...
Brand: OTC | Manufacturer: Otc
Dimensions: 2.00 x 17.50 x 12.00 inches | Weight: 8.10 Pounds
Warranty: One year limited warranty
See On Amazon #18
OTC 6601 Rear Axle Nut Wrench for Ford
Asin: B000OCHDAE | Model: 6601 | PartNumber: 6601 | Ean: 0731413047688, 0069060273151 | UPC: 731413047688, 069060273151
4-Lug Socket.
Use With A 1/2 Drive Ratchet Or Breaker Bar.
Used On A Ford Rear Axle.
Features
- Same as Ford special tool number 205-448
- Used on a Ford rear axle
- 4-lug socket
- Use with a 1/2 Drive ratchet or breaker bar
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 4.60 x 3.00 x 3.20 Inches | Weight: 3.05 pounds
Warranty: Limited lifetime warranty
See On Amazon #19
OTC 6574 Universal Heavy Duty Hub Puller
Asin: B005MVB3MG | Model: 6574 | PartNumber: 6574 | Ean: 0731413560361 | UPC: 731413560361
Forged Puller Assembly With 1 Inch Drive Screw.
Additional Legs Can Be Added To Center Hub For Special Applications.
Recommended For Use With Impact Gun And/Or Striking With A Hammer.
Wide Range Of 4 Inch To 8 Inch + Bolt Circle.
Features
- Adjustable sliding legs can be positioned anywhere on center hub
- Wide range of 4 inch to 8 inch + bolt circle
- Forged puller assembly with 1 inch drive screw
- Recommended for use with impact gun and/or striking with a hammer
- Additional legs can be added to center hub for special applications
- See more on Amazon...
First Available: 01/30/2013
Brand: OTC | Manufacturer: OTC
Dimensions: 2.00 x 12.00 x 12.00 inches | Weight: 13.00 pounds
Warranty: Lifetime Limited Warranty
See On Amazon #20
OTC OTC38354 Receiving Cup
Asin: B000VHVJ9I | Model: 38354 | PartNumber: 38354 | Ean: 0731413158766 | UPC: 731413158766
Brand: OTC | Manufacturer: OTC
Dimensions: 1.90 x 2.20 x 2.10 Inches | Weight: 0.70 Pounds
See On Amazon
Looking For Something Else?
Search