uxcell 6mm Twist Drill Bits, High-Speed Steel Straight Shank Extra Long Drill Bit 250mm Length for Wood Plastic Aluminum
Asin: B0B3GR9X55 | Model: a22040100ux0140 | PartNumber: a22040100ux0140
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Extended Drill：The Jobber Extended Drill Is Suitable For A Wide Range Of Applications, Allowing You To Access Hard-To-Reach Areas Where Ordinary Drills Cannot. High Hardness, Sharp Twist Drill Bits Will Make Drilling Easier And More Efficient..
Notice: Please Keep It Cool And Gentle When Using It, The Correct Use Can Greatly Extend The Life Of The Twist Drill..
Twisted Design: Split Point Tip And Twist Design Increases Cutting Speed While Easily Self-Centering To Prevent Movement. The Twisted Design Of The Drill Bit Quickly Removes Drilled Chips, Then Leaving A Smooth Hole..
High Speed Steel: Made Of High-Speed Steel, With High Hardness, Heat Resistance, Wear Resistance, Durability And Long Service Life..
Features
- Specification: Drill Bit Diameter: 6mm / 0.24-inch; Flute Length: 155mm / 6.1-inch; Shank Diameter: 6mm / 0.24-inch; Total Length: 250mm / 9.84-inch; 1 x Lengthened Drill Bits
- High Speed Steel: Made of high-speed steel, with high hardness, heat resistance, wear resistance, durability and long service life.
- Extended Drill The jobber extended drill is suitable for a wide range of applications, allowing you to access hard-to-reach areas where ordinary drills cannot. High hardness, sharp twist drill bits will make drilling easier and more efficient.
- Twisted Design: Split point tip and twist design increases cutting speed while easily self-centering to prevent movement. The twisted design of the drill bit quickly removes drilled chips, then leaving a smooth hole.
- Notice: Please keep it cool and gentle when using it, the correct use can greatly extend the life of the twist drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 6mm Twist Drill Bits
#1
uxcell Metric Machine Tap M6 x 1mm H2 High Speed Steel 3 Straight Flutes Screw Tapping Threading Machinist Repair DIY Tool 2pcs
Asin: B07KT4BDT3 | Model: a18102400ux0270 | PartNumber: a18102400ux0270
Suitable For Processing Through Holes Or Shallow Holes On Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Standard Metric Thread Design, Clear And Tidy, Provide Rapid Chip Removal For Efficient Threading. Straight Flute Design, Right Hand Tapping Direction. The Mini Metric Taps Are Mainly Used For Clocks, Watches, Low Hardness Wood And Soft Metal Hole Processing..
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, And Fit A Wide Range Of Applications..
Features
- Thread Size: M6 x 1mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
- The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
- Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading. Straight flute design, right hand tapping direction. The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing.
- Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.72 x 1.97 inches
See On Amazon #2
uxcell Straight Shank Twist Drill Bits 6mm High Speed Steel 4341 with 6mm Shank 2 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CY7MCS | Model: a19102500ux0119 | PartNumber: a19102500ux0119
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 6mm / 0.24"; Shank Diameter : 6mm / 0.24"; Cutting Edge Length: 53mm / 2.09"; Total Length : 90mm / 3.54"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell M6 x 1 Spiral Point Thread Tap and 5.0mm Twist Drill Bit Set, Metric Titanium Plated 6542 High Speed Steel Machine Screw Thread Tap Threading Tool
Asin: B09TYS683J | Model: a22010500ux0514 | PartNumber: a22010500ux0514
Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches.Titanium Coating Provides Excellent Corrosion Resistance And Wear Resistance..
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Spiral Point Tap: Spiral Point Flute Design, Downward Chip Removal, Right Hand Thread Cutting, Fast Tapping With Accuracy. Suitable For Processing Through-Hole Threads. For Fast Tapping In Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics..
Features
- Tap and Drill Bit: Tap thread size: M6 x 1, drill bit diameter: 5mm / 0.2". High-speed steel tool has high hardness and toughness for wear resistance. Good for general purpose applications.
- Spiral Point Tap: Spiral point flute design, downward chip removal, right hand thread cutting, fast tapping with accuracy. Suitable for processing through-hole threads. For fast tapping in aluminum, die steel, stainless steel, bronze, hard plastics.
- Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.Titanium coating provides excellent corrosion resistance and wear resistance.
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #4
uxcell Straight Shank Twist Drill Bits 6mm High Speed Steel 4341 with 6mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CWXDQ9 | Model: a19102500ux0118 | PartNumber: a19102500ux0118
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 6mm / 0.24"; Shank Diameter : 6mm / 0.24"; Cutting Edge Length: 53mm / 2.09"; Total Length : 90mm / 3.54"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #5
uxcell 6-Inch Lengthen Twist Drill Bit Set High-Speed Steel 2mm - 5mm Drilling Dia 150mm Total Length
Asin: B09F8LLTSW | Model: a21012900ux0338 | PartNumber: a21012900ux0338
High-Speed Steel Material: High Strength, Good Toughness, And Long Service Life..
Wide Range Of Applications: Suitable For Handmade Wood And Plastic Products..
Deep Drilling: Extra-Long Cutting Edges Can Be Used For Deep Drilling With These Drills..
Extra-Long Length: Provides Better Stability And Balance During Fast Operation To Ensure That The Position Is Intact..
Features
- 5 Piece & 5 Sizes: 2mm, 2.5mm, 3mm, 4mm, 5mm
- Extra-long Length: Provides better stability and balance during fast operation to ensure that the position is intact.
- High-speed Steel Material: High strength, good toughness, and long service life.
- Deep Drilling: Extra-long cutting edges can be used for deep drilling with these drills.
- Wide Range of Applications: Suitable for handmade wood and plastic products.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #6
uxcell 6Pcs Mini Twist Drill Bit, 0.6mm Micro Engraving Drill Bits, High-Speed Steel 2.35mm Shank Titanium Coated for DIY Resin, Amber and Wood
Asin: B09WD159HP | Model: a22011500ux0334 | PartNumber: a22011500ux0334
Cooling Style: Adapt To Several Kinds Of Cooling Conditions, For Example Oil Mist, Water, Oil, Air Cooling..
Applications: This Twist Drill Is Proper For Electric Drill, Hand Electric Drill And Impact Electric Drill. Suitable For Diy Resin, Amber And Wood Drilling..
Design: Spiral Flute Design For Quick Cleaning Of Chips. The Sharp Cutting Edge Provides A Smooth Cut Without Glitches. Chip Removal Is Not Easy To Stick To The Tool..
Material: Made Of High-Speed Steel, With High Hardness And Stable Operation. The Drill Bit Is Titanium-Plated, Which Has Higher Wear Resistance And Lower Friction Coefficient. Not Easy To Accumulate Chips And Long Service Life..
Features
- Specification: Shank Type: Round Shank; Tool Flute Type: Spiral; Rock Well Hardness Grade: 63-66 HRC; Twist Drill Bits Diameter: 0.6mm / 0.02-inch; Shank Diameter: 2.35mm / 0.09-inch; Total Length: 49.5mm / 1.95-inch; Drill Bit Length: 21mm / 0.83-inch
- Material: Made of high-speed steel, with high hardness and stable operation. The drill bit is titanium-plated, which has higher wear resistance and lower friction coefficient. Not easy to accumulate chips and long service life.
- Cooling Style: Adapt to several kinds of cooling conditions, for example oil mist, water, oil, air cooling.
- Design: Spiral flute design for quick cleaning of chips. The sharp cutting edge provides a smooth cut without glitches. Chip removal is not easy to stick to the tool.
- Applications: This twist drill is proper for electric drill, hand electric drill and impact electric drill. Suitable for DIY resin, amber and wood drilling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell PCB Drill Bits 1.6mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 10 Pcs
Asin: B07ZWH63RQ | Model: a19091500ux0197 | PartNumber: a19091500ux0197
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 1.6mm; cutting edge length: 12mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell Solid Carbide Drill Bits, 6.1mm C2/K20 Tungsten Carbide Jobber Drill Bits Straight Shank Drilling Tool for Stainless Steel Aluminum Iron Metal Plastic
Asin: B09WYP5XHV | Model: a22021800ux0625 | PartNumber: a22021800ux0625
Material: Constructed From Medium Grain C2/K20 Tungsten Carbide, The Drill Bit Has Good Toughness, High Hardness (Hra89) And Wear Resistance. With Good Milling And Cutting Performance, Can Ensure High Work Efficiency. Carbide Tool Offers Faster Cutting Speeds Than Other Substrates..
Tips: Used On Machining Centers, Cnc Lathes. The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life..
Features: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy..
Wide Applications: Widely Used For Drilling Non-Ferrous Metal, Cast Iron, Stainless Steel, Aluminum, Copper, Alloy Steel, Plastic, Wood. Designed With The Base Substrate Without Any Additional Coatings, Suitable For Wide Ranges Of Applications..
Features
- Twist Drill Bits: Drilling Diameter: 6.1mm / 0.24"; Flute Length: 35mm / 1.38"; Overall Length: 60mm / 2.36"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.
- Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
- Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
- Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell 6mm Twist Drill Bits, High-Speed Steel Straight Shank Extra Long Drill Bit 300mm Length for Wood Plastic Aluminum
Asin: B0B1Q8JTZN | Model: a22040100ux0153 | PartNumber: a22040100ux0153
Extended Drill：The Jobber Extended Drill Is Suitable For A Wide Range Of Applications, Allowing You To Access Hard-To-Reach Areas Where Ordinary Drills Cannot. High Hardness, Sharp Twist Drill Bits Will Make Drilling Easier And More Efficient..
Notice: Please Keep It Cool And Gentle When Using It, The Correct Use Can Greatly Extend The Life Of The Twist Drill..
Twisted Design: Split Point Tip And Twist Design Increases Cutting Speed While Easily Self-Centering To Prevent Movement. The Twisted Design Of The Drill Bit Quickly Removes Drilled Chips, Then Leaving A Smooth Hole..
High Speed Steel: Made Of High-Speed Steel, With High Hardness, Heat Resistance, Wear Resistance, Durability And Long Service Life..
Features
- Specification: Drill Bit Diameter: 6mm / 0.24-inch; Flute Length: 185mm / 7.28-inch; Shank Diameter: 6mm / 0.24-inch; Total Length: 300mm / 11.81-inch; 1 x Lengthened Drill Bits
- High Speed Steel: Made of high-speed steel, with high hardness, heat resistance, wear resistance, durability and long service life.
- Extended Drill The jobber extended drill is suitable for a wide range of applications, allowing you to access hard-to-reach areas where ordinary drills cannot. High hardness, sharp twist drill bits will make drilling easier and more efficient.
- Twisted Design: Split point tip and twist design increases cutting speed while easily self-centering to prevent movement. The twisted design of the drill bit quickly removes drilled chips, then leaving a smooth hole.
- Notice: Please keep it cool and gentle when using it, the correct use can greatly extend the life of the twist drill.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell 2.3mm Drill Bits High Speed Steel Straight Shank 52mm Length Twist Drill Bit Fully Ground Titanium Coated 6 Pcs
Asin: B099J9DFWR | Model: a21013000ux0266 | PartNumber: a21013000ux0266
[Professional And Diy Use]- Suitable For Hardened Materials And Hard Metals, Such As Cast Iron, Hard Plastics, And Also Suitable For Soft Materials. When It Cannot Penetrate, Try To Adjust The Rpm..
[Note]- Please Keep Cool And Gentle Using, The Working Life Of The Twist Drill Bits Can Be Largely Prolonged By Proper Usage.
[Twisted Design]- With A 120° Angle Point And Twist Design, It Can Increase The Cutting Speed Through Automatic Centering; Avoid Displacement During The Work Process, And At The Same Time Remove Debris And Particles Faster And Easier. The Straight Shank Can Be Firmly Fixed And Accurately Centered, Suitable For Standard Drill Chucks And Conventional Round Chucks..
[Strength And Hardness]: Made Of High-Speed 6542 Steel, Rock Wall Hardness Grade Hrc 63-66. With Titanium Coating Treatment, It Is Reliable And Durable..
Features
- [Package content]- 6 Pcs 2.3mm Drill Dia High Speed Steel straight shank twist drills.
- [Strength and Hardness]: Made of high-speed 6542 steel, rock wall hardness grade HRC 63-66. With titanium coating treatment, it is reliable and durable.
- [Professional and DIY Use]- Suitable for hardened materials and hard metals, such as cast iron, hard plastics, and also suitable for soft materials. When it cannot penetrate, try to adjust the RPM.
- [Twisted design]- With a 120 angle point and twist design, it can increase the cutting speed through automatic centering; avoid displacement during the work process, and at the same time remove debris and particles faster and easier. The straight shank can be firmly fixed and accurately centered, suitable for standard drill chucks and conventional round chucks.
- [Note]- Please keep cool and gentle using, the working life of the twist drill bits can be largely prolonged by proper usage
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #11
uxcell High Speed Steel Lengthen Straight Shank Twist Drill Bit Fully Ground Black Oxide 3mm Drill Diameter 100mm Total Length 55mm Drill Bit Length 6 Pcs
Asin: B099JF8DY8 | Model: a21013000ux0338 | PartNumber: a21013000ux0338
[Professional And Diy Use]- Suitable For Hardened Materials And Hard Metals, Such As Cast Iron, Hard Plastics, And Also Suitable For Soft Materials. When It Cannot Penetrate, Try To Adjust The Rpm..
[Note]- Please Keep Cool And Gentle Using, The Working Life Of The Twist Drill Bits Can Be Largely Prolonged By Proper Usage.
[Twisted Design]- With A 120° Angle Point And Twist Design, It Can Increase The Cutting Speed Through Automatic Centering; Avoid Displacement During The Work Process, And At The Same Time Remove Debris And Particles Faster And Easier. The Straight Shank Can Be Firmly Fixed And Accurately Centered, Suitable For Standard Drill Chucks And Conventional Round Chucks..
[Strength And Hardness]- Made Of High-Speed 6542 Steel, Rock Wall Hardness Grade Hrc 63-66. With Black Oxide Coating Treatment, It Is Reliable And Durable..
Features
- [Package content]- 6 Pcs 3mm Drill Dia High Speed Steel straight shank twist drills.
- [Strength and Hardness]- Made of high-speed 6542 steel, rock wall hardness grade HRC 63-66. With black oxide coating treatment, it is reliable and durable.
- [Professional and DIY use]- Suitable for hardened materials and hard metals, such as cast iron, hard plastics, and also suitable for soft materials. When it cannot penetrate, try to adjust the RPM.
- [Twisted Design]- With a 120 angle point and twist design, it can increase the cutting speed through automatic centering; avoid displacement during the work process, and at the same time remove debris and particles faster and easier. The straight shank can be firmly fixed and accurately centered, suitable for standard drill chucks and conventional round chucks.
- [Note]- Please keep cool and gentle using, the working life of the twist drill bits can be largely prolonged by proper usage
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell Metric Machine Tap M6 x 1mm H2 Titanium Coated (Ti-Coated) High Speed Steel 3 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool
Asin: B07KT2YQH3 | Model: a18102400ux0229 | PartNumber: a18102400ux0229
Suitable For Processing Through Holes Or Shallow Holes. The Mini Metric Taps Are Mainly Used For Clocks, Watches, Low Hardness Wood And Soft Metal Hole Processing. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Design, Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Ti-Coated Taps Provide Capability, Durability And Long Service Life. Fits A Wide Range Of Applications..
Features
- Thread Size: M6 x 1mm. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications.
- The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications.
- Suitable for processing through holes or shallow holes. The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
- Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.15 x 0.39 inches
See On Amazon #13
uxcell Solid Carbide Drill Bits, 2.6mm C2/K20 Tungsten Carbide Jobber Drill Bits Straight Shank Drilling Tool for Stainless Steel Aluminum Iron Metal Plastic 2pcs
Asin: B09XF1935K | Model: a22021800ux0562 | PartNumber: a22021800ux0562
Material: Constructed From Medium Grain C2/K20 Tungsten Carbide, The Drill Bit Has Good Toughness, High Hardness (Hra89) And Wear Resistance. With Good Milling And Cutting Performance, Can Ensure High Work Efficiency. Carbide Tool Offers Faster Cutting Speeds Than Other Substrates..
Tips: Used On Machining Centers, Cnc Lathes. The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life..
Features: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy..
Wide Applications: Widely Used For Drilling Non-Ferrous Metal, Cast Iron, Stainless Steel, Aluminum, Copper, Alloy Steel, Plastic, Wood. Designed With The Base Substrate Without Any Additional Coatings, Suitable For Wide Ranges Of Applications..
Features
- Twist Drill Bits: Drilling Diameter: 2.6mm / 0.102"; Flute Length: 20mm / 0.79"; Overall Length: 40mm / 1.57"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.
- Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
- Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
- Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell 2pcs Jobber Drill Bits 12.5mm (0.492") Black Nitride & Gold Titanium Coated M2 High Speed Steel (HSS) Twist Drill Bits for Stainless Steel Aluminum Alloy Metal
Asin: B0CN9FNPXX
Black & Gold Finish: Black Nitride And Gold Titanium Dual Coatings Can Apply Lubricant Better For Smoother Drilling And Are More Durable And Corrosion Resistant. Sharp Cutting Edges Provide Neat And Smooth Cuts. Large Spiral Grooves Facilitate The Export Of Metal Chips..
Tips: Use An Appropriate Lubricant To Reduce Friction And Heat Build-Up. Controlling The Speed Is Very Important, Recommended Speed: 100-800Rpm/Min. The Larger The Diameter, The Slower The Speed Required. If The Hole Is Larger Than 6Mm, First Drill A Small Hole With A 3.2Mm-4Mm Drill Bit, And Then Use A Larger Drill Bit To Enlarge The Hole..
Wide Applications: Drill Bits Produce Holes In Stainless Steel, Cast Iron, A3 Steel, Carbon Steel, Aluminum Alloy, Copper, Wood And Plastic. Most Suitable For Drilling Metals With A Hardness Less Than Hrc38, And Cannot Drill Quenched Metals, Tiles, Concrete, Walls, Stones..
M2 High Speed Steel: M2 High Speed Steel (Hrc64-66) Drill Bits Offer Excellent Heat Resistance And Hardness For Durability And Longevity, As Well As Good Cutting Performance And Accuracy For Clean, Precise Holes With Minimal Burrs..
Features
- Twist Drill Bits: Cutting edge diameter: 12.5mm / 0.492"; round shank diameter: 12.5mm / 0.492"; cutting edge length: 105mm / 4.13"; overall length: 149mm / 5.87"; split point: 135 degree. Used with hand drills, drill presses, bench drills, machining centers, CNC lathes, etc.
- M2 High Speed Steel: M2 high speed steel (HRC64-66) drill bits offer excellent heat resistance and hardness for durability and longevity, as well as good cutting performance and accuracy for clean, precise holes with minimal burrs.
- Black & Gold Finish: Black nitride and gold titanium dual coatings can apply lubricant better for smoother drilling and are more durable and corrosion resistant. Sharp cutting edges provide neat and smooth cuts. Large spiral grooves facilitate the export of metal chips.
- Wide Applications: Drill bits produce holes in stainless steel, cast iron, A3 steel, carbon steel, aluminum alloy, copper, wood and plastic. Most suitable for drilling metals with a hardness less than HRC38, and cannot drill quenched metals, tiles, concrete, walls, stones.
- Tips: Use an appropriate lubricant to reduce friction and heat build-up. Controlling the speed is very important, recommended speed: 100-800rpm/min. The larger the diameter, the slower the speed required. If the hole is larger than 6mm, first drill a small hole with a 3.2mm-4mm drill bit, and then use a larger drill bit to enlarge the hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell 6pcs Jobber Drill Bits 2.5mm (0.098") Black Nitride & Gold Titanium Coated M2 High Speed Steel (HSS) Twist Drill Bits for Stainless Steel Aluminum Alloy Metal
Asin: B0CN9F9Y9Q
Black & Gold Finish: Black Nitride And Gold Titanium Dual Coatings Can Apply Lubricant Better For Smoother Drilling And Are More Durable And Corrosion Resistant. Sharp Cutting Edges Provide Neat And Smooth Cuts. Large Spiral Grooves Facilitate The Export Of Metal Chips..
Tips: Use An Appropriate Lubricant To Reduce Friction And Heat Build-Up. Controlling The Speed Is Very Important, Recommended Speed: 100-800Rpm/Min. The Larger The Diameter, The Slower The Speed Required. If The Hole Is Larger Than 6Mm, First Drill A Small Hole With A 3.2Mm-4Mm Drill Bit, And Then Use A Larger Drill Bit To Enlarge The Hole..
Wide Applications: Drill Bits Produce Holes In Stainless Steel, Cast Iron, A3 Steel, Carbon Steel, Aluminum Alloy, Copper, Wood And Plastic. Most Suitable For Drilling Metals With A Hardness Less Than Hrc38, And Cannot Drill Quenched Metals, Tiles, Concrete, Walls, Stones..
M2 High Speed Steel: M2 High Speed Steel (Hrc64-66) Drill Bits Offer Excellent Heat Resistance And Hardness For Durability And Longevity, As Well As Good Cutting Performance And Accuracy For Clean, Precise Holes With Minimal Burrs..
Features
- Twist Drill Bits: Cutting edge diameter: 2.5mm / 0.098"; round shank diameter: 2.5mm / 0.098"; cutting edge length: 30mm / 1.18"; overall length: 56mm / 2.2"; split point: 135 degree. Used with hand drills, drill presses, bench drills, machining centers, CNC lathes, etc.
- M2 High Speed Steel: M2 high speed steel (HRC64-66) drill bits offer excellent heat resistance and hardness for durability and longevity, as well as good cutting performance and accuracy for clean, precise holes with minimal burrs.
- Black & Gold Finish: Black nitride and gold titanium dual coatings can apply lubricant better for smoother drilling and are more durable and corrosion resistant. Sharp cutting edges provide neat and smooth cuts. Large spiral grooves facilitate the export of metal chips.
- Wide Applications: Drill bits produce holes in stainless steel, cast iron, A3 steel, carbon steel, aluminum alloy, copper, wood and plastic. Most suitable for drilling metals with a hardness less than HRC38, and cannot drill quenched metals, tiles, concrete, walls, stones.
- Tips: Use an appropriate lubricant to reduce friction and heat build-up. Controlling the speed is very important, recommended speed: 100-800rpm/min. The larger the diameter, the slower the speed required. If the hole is larger than 6mm, first drill a small hole with a 3.2mm-4mm drill bit, and then use a larger drill bit to enlarge the hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell Solid Carbide Drill Bits, 3.6mm C2/K20 Tungsten Carbide Jobber Drill Bits Straight Shank Drilling Tool for Stainless Steel Aluminum Iron Metal Plastic 2pcs
Asin: B09XDZGKJP | Model: a22021800ux0586 | PartNumber: a22021800ux0586
Material: Constructed From Medium Grain C2/K20 Tungsten Carbide, The Drill Bit Has Good Toughness, High Hardness (Hra89) And Wear Resistance. With Good Milling And Cutting Performance, Can Ensure High Work Efficiency. Carbide Tool Offers Faster Cutting Speeds Than Other Substrates..
Tips: Used On Machining Centers, Cnc Lathes. The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life..
Features: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy..
Wide Applications: Widely Used For Drilling Non-Ferrous Metal, Cast Iron, Stainless Steel, Aluminum, Copper, Alloy Steel, Plastic, Wood. Designed With The Base Substrate Without Any Additional Coatings, Suitable For Wide Ranges Of Applications..
Features
- Twist Drill Bits: Drilling Diameter: 3.6mm / 0.142"; Flute Length: 20mm / 0.79"; Overall Length: 40mm / 1.57"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.
- Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
- Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
- Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell 6.7mm Drilling Dia Straight Shank HSS Cobalt Metric Twist Drill Bit 3pcs
Asin: B06XKWJDY8 | Model: a17011600ux0375 | PartNumber: a17011600ux0375 | Ean: 0604267654633 | UPC: 604267654633
Material: Hss, Cobalt; Flute Length: 55Mm / 2.2".
Fearure: Straight Shank; Color: Champagne Color.
Bit Diameter: 6.7Mm; Weight: 61G.
Product Name: Twist Drill Bit; Package Content: 3Pcs X Twist Drill Bit.
Features
- Total Length: 100mm / 4"; Shank Diameter: 6.7mm
- Product Name: Twist Drill Bit; Package Content: 3pcs x Twist Drill Bit
- Material: HSS, Cobalt; Flute Length: 55mm / 2.2
- Bit Diameter: 6.7mm; Weight: 61g
- Fearure: Straight Shank; Color: Champagne Color
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.15 Pounds
See On Amazon #18
uxcell 2Pcs Mini Twist Drill Bit, 0.6mm Micro Engraving Drill Bits, High-Speed Steel 2.35mm Shank Titanium Coated for DIY Resin, Amber and Wood
Asin: B09WCXTMB8 | Model: a22011500ux0332 | PartNumber: a22011500ux0332
Cooling Style: Adapt To Several Kinds Of Cooling Conditions, For Example Oil Mist, Water, Oil, Air Cooling..
Applications: This Twist Drill Is Proper For Electric Drill, Hand Electric Drill And Impact Electric Drill. Suitable For Diy Resin, Amber And Wood Drilling..
Design: Spiral Flute Design For Quick Cleaning Of Chips. The Sharp Cutting Edge Provides A Smooth Cut Without Glitches. Chip Removal Is Not Easy To Stick To The Tool..
Material: Made Of High-Speed Steel, With High Hardness And Stable Operation. The Drill Bit Is Titanium-Plated, Which Has Higher Wear Resistance And Lower Friction Coefficient. Not Easy To Accumulate Chips And Long Service Life..
Features
- Specification: Shank Type: Round Shank; Tool Flute Type: Spiral; Rock Well Hardness Grade: 63-66 HRC; Twist Drill Bits Diameter: 0.6mm / 0.02-inch; Shank Diameter: 2.35mm / 0.09-inch; Total Length: 49.5mm / 1.95-inch; Drill Bit Length: 21mm / 0.83-inch
- Material: Made of high-speed steel, with high hardness and stable operation. The drill bit is titanium-plated, which has higher wear resistance and lower friction coefficient. Not easy to accumulate chips and long service life.
- Cooling Style: Adapt to several kinds of cooling conditions, for example oil mist, water, oil, air cooling.
- Design: Spiral flute design for quick cleaning of chips. The sharp cutting edge provides a smooth cut without glitches. Chip removal is not easy to stick to the tool.
- Applications: This twist drill is proper for electric drill, hand electric drill and impact electric drill. Suitable for DIY resin, amber and wood drilling.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell Metric Thread Tap M10 x 1.5 H2 130mm Extra Long Straight Flute Screw Thread Milling Machine Taps Threading Tapping Repair Tool
Asin: B0CWPBNW6R
Wide Applications: Thread Taps Create New Threads Or Re-Thread Damaged Or Jammed Threads. Widely Used For Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel. Add Proper Tapping Oil For Higher Quality Threads And More Durable Taps..
Tips: Machine Taps Are Used With Tapping, Drilling, Automatic Or Milling Machines. Drill The Holes With A Twist Drill Bit First, Then Tap With A Thread Tap. The Tapping Angle Should Be 90 Degrees Vertical And Stable. Not Recommended For Hand And Electric Drill Tapping..
6542 High Speed Steel Tap: Offer High Hardness, Good Toughness, Wear Resistance, And Excellent Cutting Performance. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, Great For A Wide Range Of Applications..
Straight Flute Tap: Straight Flute Design, Clear Threads Without Burrs, Right Hand Tapping Direction. Provides Rapid Downward Chip Removal To Achieve Efficient Thread Cutting, Suitable For Processing Through Holes Or Shallow Holes..
Features
- Metric Thread Tap: Thread size: M10 x 1.5 (right hand); accuracy: H2; total length: 130mm / 5" (extra long); square shank width: 6mm / 0.24"; thread length: 25mm / 0.98"; number of chip flutes: 3 flutes. The tapping depth should not exceed 1.5 times the diameter of the tap.
- Straight Flute Tap: Straight flute design, clear threads without burrs, right hand tapping direction. Provides rapid downward chip removal to achieve efficient thread cutting, suitable for processing through holes or shallow holes.
- Wide Applications: Thread taps create new threads or re-thread damaged or jammed threads. Widely used for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel. Add proper tapping oil for higher quality threads and more durable taps.
- 6542 High Speed Steel Tap: Offer high hardness, good toughness, wear resistance, and excellent cutting performance. Uncoated taps feature just the base substrate without any additional coatings, great for a wide range of applications.
- Tips: Machine taps are used with tapping, drilling, automatic or milling machines. Drill the holes with a twist drill bit first, then tap with a thread tap. The tapping angle should be 90 degrees vertical and stable. NOT recommended for hand and electric drill tapping.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell 6pcs Jobber Drill Bits 5.5mm (0.217") Black Nitride & Gold Titanium Coated M2 High Speed Steel (HSS) Twist Drill Bits for Stainless Steel Aluminum Alloy Metal
Asin: B0CN9FGFLQ
Black & Gold Finish: Black Nitride And Gold Titanium Dual Coatings Can Apply Lubricant Better For Smoother Drilling And Are More Durable And Corrosion Resistant. Sharp Cutting Edges Provide Neat And Smooth Cuts. Large Spiral Grooves Facilitate The Export Of Metal Chips..
Tips: Use An Appropriate Lubricant To Reduce Friction And Heat Build-Up. Controlling The Speed Is Very Important, Recommended Speed: 100-800Rpm/Min. The Larger The Diameter, The Slower The Speed Required. If The Hole Is Larger Than 6Mm, First Drill A Small Hole With A 3.2Mm-4Mm Drill Bit, And Then Use A Larger Drill Bit To Enlarge The Hole..
Wide Applications: Drill Bits Produce Holes In Stainless Steel, Cast Iron, A3 Steel, Carbon Steel, Aluminum Alloy, Copper, Wood And Plastic. Most Suitable For Drilling Metals With A Hardness Less Than Hrc38, And Cannot Drill Quenched Metals, Tiles, Concrete, Walls, Stones..
M2 High Speed Steel: M2 High Speed Steel (Hrc64-66) Drill Bits Offer Excellent Heat Resistance And Hardness For Durability And Longevity, As Well As Good Cutting Performance And Accuracy For Clean, Precise Holes With Minimal Burrs..
Features
- Twist Drill Bits: Cutting edge diameter: 5.5mm / 0.217"; round shank diameter: 5.5mm / 0.217"; cutting edge length: 64mm / 2.52"; overall length: 93mm / 3.66"; split point: 135 degree. Used with hand drills, drill presses, bench drills, machining centers, CNC lathes, etc.
- M2 High Speed Steel: M2 high speed steel (HRC64-66) drill bits offer excellent heat resistance and hardness for durability and longevity, as well as good cutting performance and accuracy for clean, precise holes with minimal burrs.
- Black & Gold Finish: Black nitride and gold titanium dual coatings can apply lubricant better for smoother drilling and are more durable and corrosion resistant. Sharp cutting edges provide neat and smooth cuts. Large spiral grooves facilitate the export of metal chips.
- Wide Applications: Drill bits produce holes in stainless steel, cast iron, A3 steel, carbon steel, aluminum alloy, copper, wood and plastic. Most suitable for drilling metals with a hardness less than HRC38, and cannot drill quenched metals, tiles, concrete, walls, stones.
- Tips: Use an appropriate lubricant to reduce friction and heat build-up. Controlling the speed is very important, recommended speed: 100-800rpm/min. The larger the diameter, the slower the speed required. If the hole is larger than 6mm, first drill a small hole with a 3.2mm-4mm drill bit, and then use a larger drill bit to enlarge the hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search