Jerax tools Quick Change Step Drill Bit Double Fluted M2 High Speed Steel Drill bits for Hole Drilling in Stainless Steel, Copper, Aluminum, Wood, Plastic (7/8")
Asin: B0B3WRR6CT | Model: JTQSD003 | PartNumber: JTQSD003
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[Easy & Fast]: With Our High-Accuracy Cnc Processing And Several Optimized Design Details Over The Years, Our Design Cuts Easy, Fast And Clean, Outperforming The Average Ones On The Market. Comes With Quick Change 1/4 Inch Hex Shank For Quick Bit Switches And Compatible With Impact Ready Power Tools..
[Multi Hole Sizes]: No Need To Buy A Kit. This One Step Bit Comes With 9 Marked Sizes So You Can Drill 9 Different Hole Sizes, Saving You Time And Efforts To Change Bits. Marked Sizes Including: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"..
[Heavy Duty]: Cuts Holes On Stainless Steel, Hardened Metal, Mild Steel, Galvanized Steel, Aluminum, Copper, Plastic, Wood, Or Anything That Has Similar Or Lower Hardness As These Materials. Up To 12Ga /2.7Mm Thickness For Stainless Steel..
[Non-Stop]: Our Polished Steps And Size Highlights Make It Possible For You To See Target Hole Size During Drilling. No Need To Stop In The Middle Of The Drilling To Check. Save You Time And Hassle..
Features
- [M2 HSS]: Cuts A LOT MORE CLEAN holes and much EASIER than average step bits. In general, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability. Our additional Vacuum heat treatment and Nitride surface hardening treatment make the performance even better.
- [Non-stop]: Our Polished Steps and Size Highlights make it possible for you to see target hole size during drilling. No need to stop in the middle of the drilling to check. Save you time and hassle.
- [Easy & Fast]: With our high-accuracy CNC processing and several optimized design details over the years, our design cuts EASY, FAST and CLEAN, outperforming the average ones on the market. Comes with Quick change 1/4 inch hex shank for quick bit switches and compatible with impact ready power tools.
- [Heavy duty]: Cuts holes on Stainless steel, Hardened Metal, Mild steel, Galvanized steel, Aluminum, Copper, Plastic, Wood, or anything that has similar or lower hardness as these materials. Up to 12ga /2.7mm thickness for Stainless steel.
- [Multi Hole Sizes]: No need to buy a kit. This one step bit comes with 9 marked sizes so you can drill 9 different hole sizes, saving you time and efforts to change bits. Marked sizes including: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4.
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
Dimensions: 3.60 x 0.70 x 0.70 Inches
See On Amazon Similar To Jerax tools Quick Change Step
#1
Neiko - 43219-22909 10181A Quick Change HSS Titanium Coated Spiral Grooved Step Drill Bit 3-Piece Set | 31 Step Sizes in One Kit
Asin: B07B4LCWC4 | Model: 10181A | PartNumber: 10181A | Ean: 0816914021617 | UPC: 816914021617
Spiral Design: The Two-Flute Spiral Grooved Design Deburrs Chip, Dust And Debris For Clearance And Smooth Cutting. With 31 Step Sizes, Each Hole Made With These Step Bits Will Be Precise..
Includes: Each Bit Set Comes With 3 Drill Bits Of A Combined 31 Sizes To Add To Your Drilling Arsenal: 13 Step Drill (1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2-Inch) 6 Step Drill (3/16, 1/4, 5/16, 3/8, 7/16, 1/2-Inch) And 12 Step Drill (3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8-Inch)..
Quick-Change: The 1/4-Inch Hex Shank Makes For Easy, Convenient, And Quick Stepper Bit Switches And Is Compatible With Impact Ready Power Tools..
Step Drill Bit For Metal: With A Split Point Tip That Accelerates Cutting Speed While Preventing Angled Walking Away From Center Line Of Bore, Drilling Holes In Metal Is Fast, Efficient, And Clean..
Features
- PREMIUM STEP BIT: Each unibit is constructed of industrial high-speed steel with a titanium nitride coating for durability and strength to punch and drill clean holes in materials like plastic, aluminum, wood, copper, stainless steel, and other types of sheet metal.
- STEP DRILL BIT FOR METAL: With a split point tip that accelerates cutting speed while preventing angled walking away from center line of bore, drilling holes in metal is fast, efficient, and clean.
- SPIRAL DESIGN: The two-flute spiral grooved design deburrs chip, dust and debris for clearance and smooth cutting. With 31 step sizes, each hole made with these step bits will be precise.
- QUICK-CHANGE: The 1/4-inch hex shank makes for easy, convenient, and quick stepper bit switches and is compatible with impact ready power tools.
- INCLUDES: Each bit set comes with 3 drill bits of a combined 31 sizes to add to your drilling arsenal: 13 step drill (1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2-inch) 6 step drill (3/16, 1/4, 5/16, 3/8, 7/16, 1/2-inch) and 12 step drill (3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8-inch).
- See more on Amazon...
Brand: NEIKO | Manufacturer: Neiko
Dimensions: 0.75 x 6.00 x 3.50 inches | Weight: 0.26 pounds
See On Amazon #2
Jerax tools 1/4 to 1-3/8 Inch Step Drill Bit Straight Grooved Double Fluted, M2 High Speed Steel Drill bits for Hole Drilling in Stainless Steel, Copper, Aluminum, Wood, Plastic
Asin: B094VN88HK | Model: STG1-3/8 | PartNumber: STG1-3/8
[Easier | Faster | Cleaner]: With Our High-Accuracy Cnc Processing And Several Optimized Design Details Over The Years, Our Design Cuts Easy, Fast And Clean, Outperforming The Average Ones On The Market..
[Multi Hole Sizes]: No Need To Buy A Kit. This One Step Bit Comes With 6 Marked Sizes So You Can Drill 6 Different Hole Sizes, Saving You Time And Effort To Change Bits. Marked Sizes Including: 1/4", 7/8", 1-1/8", 1-7/32", 1-1/4", 1-3/8"..
[Heavy Duty]: Cuts Holes On Stainless Steel, Hardened Metal, Mild Steel, Galvanized Steel, Aluminum, Copper, Plastic, Wood, Or Anything That Has Similar Or Lower Hardness As These Materials. Up To 12Ga /2.7Mm Thickness For Stainless Steel..
[Non-Stop]: Our Polished Steps And Size Highlights Let You Able To See Target Hole Size During Drilling. No Need To Stop In The Middle Of The Drilling And Check. Save You Time And Hassle..
Features
- [M2 HSS]: Cuts A LOT MORE CLEAN holes and much EASIER than average step bits. In general, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving durability. Our additional Vacuum heat treatment and Nitride surface hardening treatment make the performance even better.
- [Non-stop]: Our Polished Steps and Size Highlights let you able to see target hole size during drilling. No need to stop in the middle of the drilling and check. Save you time and hassle.
- [Easier | Faster | Cleaner]: With our high-accuracy CNC processing and several optimized design details over the years, our design cuts EASY, FAST and CLEAN, outperforming the average ones on the market.
- [Heavy duty]: Cuts holes on Stainless steel, Hardened Metal, Mild steel, Galvanized steel, Aluminum, Copper, Plastic, Wood, or anything that has similar or lower hardness as these materials. Up to 12ga /2.7mm thickness for Stainless steel.
- [Multi Hole Sizes]: No need to buy a kit. This one step bit comes with 6 marked sizes so you can drill 6 different hole sizes, saving you time and effort to change bits. Marked sizes including: 1/4, 7/8, 1-1/8, 1-7/32, 1-1/4, 1-3/8.
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
Dimensions: 3.55 x 1.38 x 1.38 Inches | Weight: 0.10 pounds
See On Amazon #3
Jerax tools Tungsten Carbide Deburring Chamfer Tool Drill Bit 1/4" to 3/4", Remove Burr, Repair Tools for Damaged Metal Steel Screws, Bolts and Fasteners, Quick Release Hexagon Shank
Asin: B09SL8P3X5 | Model: JT-WDJQ | PartNumber: JT-WDJQ
[How To Use]: Put The Bit Over The Screws/Bolts First, Start With The Lowest Speed, Slightly Apply Pressure To Remove The Burr And Increase The Speed As Needed. Do Not Turn On The Driver Until The Bit Fully Covers The Screw/Bolt. Otherwise, The Bit Would Bump Over The Screws/Bolts And Become Hard To Control..
[Size]: Fits 1/4" Up To 3/4″ (6Mm -19Mm) Fasteners. Quick Change 1/4" Shank..
[Wide Application]: Effective For Hardened Steel, Mild Steel, Copper, Brass, Wood, Fiberglass And Hard Plastic. Can Be Used On Some Stainless Steel Scews/Bolts But Need To Be Cautious. If There Are Noises That Sounds Like Too Difficult, Then Quit Doing That..
[Chamfer]: Easily Shaves Down The Outer Edges Of A Screw/Bolt/Pipe/Rod And Remove The Burr. Quickly Repairs Damaged Bolts And Tightens The Nuts In Place Without Hurting Your Hand. No Sparks, And No Burns. Simplifies The Repair Process..
Features
- [Tungsten Carbide blade]: Carbide is a much more superior material than the HSS material that other similar products use. Carbide tools resist abrasion very well. They can also withstand much higher temperatures than steel. Tools with carbide tips maintain a sharper cutting edge better than steel tools. And they generally produce a better finish when cutting, providing a cleaner and smoother cut. In short, Carbide tools cut cleaner, faster and last longer.
- [Chamfer]: Easily shaves down the outer edges of a screw/bolt/pipe/rod and remove the burr. Quickly repairs damaged bolts and tightens the nuts in place without hurting your hand. No sparks, and no burns. Simplifies the repair process.
- [How to use]: Put the bit over the screws/bolts first, Start with the lowest speed, slightly Apply pressure to remove the burr and Increase the speed as needed. Do not turn on the driver until the bit fully covers the screw/bolt. Otherwise, the bit would bump over the screws/bolts and become hard to control.
- [Wide Application]: Effective for hardened steel, mild steel, copper, brass, wood, fiberglass and hard plastic. Can be used on some stainless steel scews/bolts but need to be cautious. If there are noises that sounds like too difficult, then quit doing that.
- [Size]: Fits 1/4 up to 3/4 (6mm -19mm) fasteners. Quick change 1/4 shank.
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
Dimensions: 2.30 x 0.90 x 0.90 inches | Weight: 0.01 Pounds
See On Amazon #4
Jerax tools Heavy Duty M35 HSS 1/4-7/8 Inch Step Drill Bit with Four Flutes, 1/4" Quich Change Shank High Speed Steel Step Bit for Stainless Steel, Metal, Wood
Asin: B0CG99T596
[Incremental Head Deisgn]: Designed For Drilling Holes On Thick Materials Like Carbon Steel, Copper, Alumiunm, And Similar Hardness Materials. Not Suitable For Stainless Steel Above 12 Gauge..
[Multi Hole Sizes]: One Bit For Several Sizes. No Need To Buy A Kit..
[Non-Stop]: Our Polished Steps And Size Highlights Let You Able To See Target Hole Size During Drilling. No Need To Stop In The Middle Of The Drilling And Check. Save You Time And Hassle..
[Easier | Faster | Cleaner]: 4 Spiral Flutes Provide Super Fast, Smooth And Clean Cutting. With Our High-Accuracy Cnc Processing And Several Optimized Design Details Over The Years, Our Design Cuts Easy, Fast And Clean, Outperforming The Average Ones On The Market..
Features
- [M35 HSS]: Made of TOP GRADE M35 high speed steel. Durable M35 high speed steel material ensures excellent durability and sharpness. Cuts A LOT MORE CLEAN holes and much EASIER than average step bits. Our additional Vacuum heat treatment and Nitride surface hardening treatment make the performance even better.
- [Easier | Faster | Cleaner]: 4 spiral flutes provide super fast, smooth and clean cutting. With our high-accuracy CNC processing and several optimized design details over the years, our design cuts EASY, FAST and CLEAN, outperforming the average ones on the market.
- [Incremental Head Deisgn]: Designed for drilling holes on thick materials like carbon steel, copper, alumiunm, and similar hardness materials. NOT suitable for stainless steel above 12 gauge.
- [Non-stop]: Our Polished Steps and Size Highlights let you able to see target hole size during drilling. No need to stop in the middle of the drilling and check. Save you time and hassle.
- [Multi Hole Sizes]: One bit for several sizes. No need to buy a kit.
- See more on Amazon...
Brand: Jerax tools | Manufacturer: Jerax tools
See On Amazon #5
HIGHFIRE 3PCS Cobalt Step Drill Bit Set, Three Spiral Flutes Hex Shank Unibit Drill Bits for Metal, Stainless Steel, Aluminum, Wood, Plastic.
Asin: B0BRPWJFHB | Model: HF105003 | PartNumber: HF105003
M35 Cobalt: M35 Cobalt Hss Step Drill Bits Are More Suitable For Hard Working Materials, Particularly Adapt To Drill Stainless Steel, Cast Iron, High Temperature Alloy, Titanium Alloy And Even Hard Plastics And Woods. And A Must-Have For Handyman Or Professionals, Perfect For Home Repairs And Light Jobs..
Hex Shank: 1/4" Hex Shank Is Easy To Be Installed On Impact Driver, Quick Change. And Eliminates Shank Spinning In Drill Chuck. The Step Drill Bits Set For Metal Are Suitable For Home Diy, General Building And Engineering Uses..
Three Flutes Step Drill Bit: Ordinary Step Drill Bits Are Prone To Deflection During Cutting, But Three Flutes Step Drill Bits Are More Stable. The Service Life Of Three Flutes Step Drill Bit Is Twice As Long As That Of Ordinary Step Drill Bits; The Drilling Accuracy Is Significantly Improved; And The Cutting Efficiency Is Much Higher Than Ordinary Ones..
Features
- TiALN COATING: TiALN coating has excellent characteristics such as high hardness, high oxidation temperature, strong adhesion, small friction coefficient and low thermal conductivity. TiALN coated cutting tools can be used for hard materials and high speed cutting.
- THREE FLUTES STEP DRILL BIT: Ordinary step drill bits are prone to deflection during cutting, but three flutes step drill bits are more stable. The service life of three flutes step drill bit is twice as long as that of ordinary step drill bits; the drilling accuracy is significantly improved; and the cutting efficiency is much higher than ordinary ones.
- M35 COBALT: M35 cobalt HSS step drill bits are more suitable for hard working materials, particularly adapt to drill stainless steel, cast iron, high temperature alloy, titanium alloy and even hard plastics and woods. And a must-have for handyman or professionals, perfect for home repairs and light jobs.
- HEX SHANK: 1/4 hex shank is easy to be installed on impact driver, quick change. And eliminates shank spinning in drill chuck. The step drill bits set for metal are suitable for home DIY, general building and engineering uses.
- See more on Amazon...
Brand: Highfire | Manufacturer: highfire
Weight: 0.22 pounds
See On Amazon #6
LABEAR-4pcs Quick Change Step Drill Bit Set, Double Fluted M2 High Speed Steel Drill bits for Hole Drilling in Stainless Steel, Copper, Aluminum, Wood, Plastic
Asin: B0CH2BZCTY
Features
- [Heavy duty]: Cuts holes on Stainless steel, Hardened Metal, Mild steel, Galvanized steel, Aluminum, Copper, Plastic, Wood, or anything that has similar or lower hardness as these materials.
- See more on Amazon...
Brand: LABEAR
See On Amazon
Looking For Something Else?
Search