1 SET Black Carb spacers 2" Tall Open Phenolic Carburetor Spacer Compatible with Holley 4150/4160 4bbl. SBC BBC Carb
Asin: B0B48PC2X3
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.③Phenolic Material:Phenolic Material Is A Type Of Plastic Resin Which Has Excellent Insulating Properties,Made Of Phenolic Resin And Engineered To Reduce Heat Transfer From The Intake Manifold To The Carburetor That Provides A Denser Air/Fuel Mixutre For Increased Power And Efficiency..
⑤Open Design Spacers:The Open Design Spacers Increase Plenum Volume For Improved High Rpm Power, While 4-Hole Designs Increase Mixture Velocity For Improved Low-Speed And Mid-Range Torque..
④Package List:Package Includes Mounting Hardware And Gaskets..
②Thickness: 2".
Features
- Compatible Information:Compatible with 4 barrel carbs with a square bore base like the Holley 4150/4160, Barry Grant, Carter and Edelbrock,that are used on many Small/Big Block Chevy, Ford and Chrysler Mopar engines.
- Thickness: 2
- Phenolic material:Phenolic material is a type of plastic resin which has excellent insulating properties,Made of phenolic resin and engineered to reduce heat transfer from the intake manifold to the carburetor that provides a denser air/fuel mixutre for increased power and efficiency.
- Package list:Package Includes mounting hardware and gaskets.
- Open Design Spacers:The open design spacers increase plenum volume for improved high rpm power, while 4-hole designs increase mixture velocity for improved low-speed and mid-range torque.
- See more on Amazon...
Brand: SHLPDFM | Manufacturer: SHLPDFM
See On Amazon Similar To 1 SET Black Carb spacers
#1
GOOACC 635Pcs Car Push Retainer Clips & Auto Fasteners Assortment -16 Most Popular Sizes Nylon Bumper Fender Rivets with 10 Cable Ties and Fasteners Remover for Toyota GM Ford Honda Acura Chrysler
Asin: B07Z83X5CD | Model: GRC-86 | PartNumber: GRC-86 | Ean: 0767912577647 | UPC: 767912577647
【Prefect For What You Need】 - Up To 620 Pieces Of Retainer Clips In A Plastic Box, Allows To Freely Diy Your Vehicle Accessories At Anytime You Wanted. It Is Definitely Cheaper Than Going To The Auto Parts Store..
【Wide Application】- Professional Push Clips Are Widely Used For Car Panel, Door Trim, Bumper And Fender For Gm Ford Toyota Honda Chrysler Etc..
【Bonus Accessories】- We Provide Different Size Fastener Removers And Cable Ties To Help You Quickly And Easily Remove Car Door Panel And Upholstery Clips Without Causing Damage To Them. Easy Access Into Confined Areas..
【Top Quality】- These Car Retainer Clips Are Made Of High-Quality Black Nylon Material, Anti-Wear And Anti-Corrosion, Would Not Break Or Crack Easily During Use..
Features
- UNIVERSAL FIT KIT - The kit contains 16 types of most common sizes of fastener clips, suitable for the OEM replacement in 6-10mm hole sizes,that you ll always have the right size.
- TOP QUALITY - These car retainer clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use.
- PREFECT FOR WHAT YOU NEED - Up to 620 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted. It is definitely cheaper than going to the auto parts store.
- BONUS ACCESSORIES - We provide different size fastener removers and cable ties to help you quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access into confined areas.
- WIDE APPLICATION - Professional push clips are widely used for car panel, door trim, bumper and fender for GM Ford Toyota Honda Chrysler etc.
- See more on Amazon...
Brand: GOOACC | Manufacturer: GOOACC
Weight: 0.09 pounds
Warranty: 2 Years Warranty
See On Amazon #2
Offset Oxygen Sensor Socket, 3/8-Inch Drive, 7/8-Inch (22mm), Wire Gate Accesses Sensor from Side, Preventing Damage to Wires, Universal for Most Cars
Asin: B0BBLNG7MW
Features: 7/8" (22Mm) Socket Fits Most Oxygen Sensors, Works With Any 3/8" Drive Ratchet Or Breaker Lever, Offset Drive Gate With Wire Links The Sensor From The Side To Prevent Damage To The Wires..
What You Get: 1 X Offset Oxygen Sensor Socket. This Product Is Sure To Meet Your Requirements. If You Have Any Questions, Please Contact Us In Time, We Will Reply You Within 24 Hours..
Function: This Oxygen Sensor Is Very Convenient To Use, The Sensor Is In The Harshest Environments And May Need To Remove Some Elbow Grease, This Quality Tool Will Save You Time! To Help Your Car's Emissions And Fuel Consumption..
Design: The Socket Has A Slotted Design. So You Remove The Oxygen Sensor With The Harness Still Connected. This 3/8" Drive Oxygen Sensor Socket Is Also Offset And Compact, Providing Extra Leverage Even In Hard-To-Reach Locations..
Features
- PREMIUM QUALITY: Made of premium chrome molybdenum steel, this socket allows the user to apply maximum torque to ensure precise assembly and function. The tool meets and exceeds ANSI/ASME standards.
- DESIGN: The socket has a slotted design. So you remove the oxygen sensor with the harness still connected. This 3/8 drive oxygen sensor socket is also offset and compact, providing extra leverage even in hard-to-reach locations.
- FEATURES: 7/8 (22mm) socket fits most oxygen sensors, works with any 3/8 drive ratchet or breaker lever, offset drive gate with wire links the sensor from the side to prevent damage to the wires.
- FUNCTION: This oxygen sensor is very convenient to use, the sensor is in the harshest environments and may need to remove some elbow grease, this quality tool will save you time! to help your car's emissions and fuel consumption.
- WHAT YOU GET: 1 x Offset Oxygen Sensor Socket. This product is sure to meet your requirements. If you have any questions, please contact us in time, we will reply you within 24 hours.
- See more on Amazon...
Brand: YOGEIER | Manufacturer: YOGEIER
Dimensions: 3.94 x 3.94 x 3.94 inches
See On Amazon #3
Dewkou 100 PCS Car Bumper Retainer Clips, 6.3mm 8mm 9mm 10mm Nylon Fasteners Rivet Replacement Kit, Push-in Screw Bumper Push Rivet Clip with Removal Tool, Suitable for Most Models (Black)
Asin: B0BNDFRYYT | Model: DWLS1002WH-100PC | PartNumber: DWLS1002WH-100PC
🚖 Superior Performance: The Rivet Remover Allows You To Quickly And Easily Remove Door Panels And Trim Clips For Easy Access To Tight Areas. Don't Worry About Lost Or Damaged Body Fasteners. For Precise Replacement Of Old And Broken Retainers..
🚖 Easy To Carry: Comes With A Compartmentalized Plastic Box For Organized Storage. Compact Size, Easy To Store Or Carry Around In The Car..
🚖 Widely Used: Suitable For Door Trim, Radiator Shroud Yoke, Fender, Bumper, Side Skirt, Grille, Hood And Splash Guard Retainer Replacement Parts. A Wide Variety Of Push-On Retainers Are Compatible With A Variety Of Vehicles, Such As Ford, Toyota, Honda, Etc..
🚖 Durable Quality: The Automotive Swivel Rivet Retainer Clips Are Made Of Strong And Durable Black Nylon Material. This Push-In Retainer Set Will Not Break Or Crack Easily During Use, And Is Resistant To Wear And Corrosion..
Features
- Product Size: You will receive 100 fixed rivets + 1 Fastener Remover. The six different stud rivets for many brands of vehicles. 4 hole sizes from 6.3 mm (1/4 inch), 8 mm (5/16 inch), 9 mm (23/64 inch), 10 mm (25/64 inch).
- Durable Quality: The automotive swivel rivet retainer clips are made of strong and durable black nylon material. This push-in retainer set will not break or crack easily during use, and is resistant to wear and corrosion.
- Superior Performance: The Rivet Remover allows you to quickly and easily remove door panels and trim clips for easy access to tight areas. Don't worry about lost or damaged body fasteners. For precise replacement of old and broken retainers.
- Widely Used: Suitable for door trim, radiator shroud yoke, fender, bumper, side skirt, grille, hood and splash guard retainer replacement parts. A wide variety of push-on retainers are compatible with a variety of vehicles, such as Ford, Toyota, Honda, etc.
- Easy to Carry: Comes with a compartmentalized plastic box for organized storage. Compact size, easy to store or carry around in the car.
- See more on Amazon...
Brand: Dewkou | Manufacturer: Dewkou
See On Amazon #4
10PCS Motorcycle Windshield Bolts Screws Kit, Aluminum Alloy Motorbike Windscreen Body Mounting Bolts Nuts, Compatible with Motorcycle Cowls Well Nuts Fairing Fasteners Screw (Black)
Asin: B0BR7KY834 | Model: Screws Kit | PartNumber: Screws Kit
【Simple Installation】: These Windshield Nail Bolts Are Easy To Install, And The Whole Process Can Be Completed In Just A Few Minutes. Because These Bolts Can Effectively Fix The Place You Want To Install, Firm And Not Easy To Fall, You Just Need To Unscrew The Original Screws And Replace Them Directly On, Very Simple And Convenient..
【Professional Manufacturing】: These Windshield Windshield Screws Strictly Adhere To The Quality Control Standards, Unique Bolt Shape, Each One Is Finely Machined, The Production Process Out Of The Quality Is Guaranteed. Through The Strict Quality Control Of The Manufacturing Team, Professional Manufacturing, Quality Is Worth Your Trust..
【Rust & Corrosion Resistant】: This Windshield Nail Bolt Is Made Of High Quality Cnc Aluminum Alloy Material With Higher Density And Hardness, Exquisite Skill, High Strength And Not Easy To Bend. The Surface Electroplating Treatment Is More Beautiful, Rustproof, Wear-Resistant, Stable Performance And Long Service Life, You Can Use It For A Long Time With Confidence..
【Broad Fitment】: This Windshield Bolt Size 0.71 Inches Long, 0.4 Inches Wide, Suitable For Motorcycles, Sports Cars, Dirt Bikes, Scooters, Etc., For The Modification Of Motorcycle Parts, Fastening, Reinforcement And Decoration. Commonly Used To Fix Motorcycle Fairings, Parts, Body Parts, Fenders, Bumpers And Some Windshields..
Features
- Aluminum Alloy Material : This motorcycle fit windshield screw is made of high quality alloy material, mainly made of aluminum, anti-corrosion and anti-oxidation, with strong metallic texture and anti-corrosion and anti-oxidation ability. It has more texture and more exquisite workmanship than the aluminum alloy material in the market.
- Broad Fitment : This windshield bolt size 0.71 inches long, 0.4 inches wide, suitable for motorcycles, sports cars, dirt bikes, scooters, etc., for the modification of motorcycle parts, fastening, reinforcement and decoration. Commonly used to fix motorcycle fairings, parts, body parts, fenders, bumpers and some windshields.
- Simple Installation : These windshield nail bolts are easy to install, and the whole process can be completed in just a few minutes. Because these bolts can effectively fix the place you want to install, firm and not easy to fall, you just need to unscrew the original screws and replace them directly on, very simple and convenient.
- Rust & Corrosion Resistant : This windshield nail bolt is made of high quality CNC aluminum alloy material with higher density and hardness, exquisite skill, high strength and not easy to bend. The surface electroplating treatment is more beautiful, rustproof, wear-resistant, stable performance and long service life, you can use it for a long time with confidence.
- Professional Manufacturing : These windshield windshield screws strictly adhere to the quality control standards, unique bolt shape, each one is finely machined, the production process out of the quality is guaranteed. Through the strict quality control of the manufacturing team, professional manufacturing, quality is worth your trust.
- See more on Amazon...
Brand: BELOMI | Manufacturer: BELOMI
Dimensions: 1.00 x 1.50 x 1.00 inches
Warranty: 0.2
See On Amazon #5
Spectre Performance (42533) 2.5" Carburetor Stud with Hardware
Asin: B0008G5FZQ | Model: SPE-42533 | PartNumber: SPE-42533 | Ean: 0089601425337 | UPC: 089601425337
Integrated-Hex Design Studs For Easy Installation.
Universal Application.
Black Oxide With Gold Iridite Nuts.
Features
- 2-1/2 inch carburetor stud set
- Black oxide with gold iridite nuts
- Integrated-hex design studs for easy installation
- Universal application
- See more on Amazon...
First Available: 12/16/2013
Brand: Spectre | Manufacturer: Spectre
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.29 pounds
Warranty: 3 Months
See On Amazon #6
Grafken 100Pcs Car Retainer Clips & Fastener Remover, Quality Nylon Push Rivets - Splash Shield Clips 6 Most Popular Sizes & Applications for Honda Toyota GM Ford, m
Asin: B0B2RQB8GT | Model: Grafken-Clip | PartNumber: Grafken-Clip
High Quality---The Trim Removal Tool And Automatic Clip Are Made Of Nylon Material And Can Be Used For A Long Time. Durability Will Not Break Or Break Easily During Use..
Service -- If You Have Any Questions About The Product, You Can Contact Us By Email And We Will Try Our Best To Solve The Problem For You..
Widely Used --- Oem: 91512Sx0003/ 6503598/ 34201621/ 5216120010/ 91503Sz3003/ 91503Sz5003. Automatic Push Clips Are Widely Used For Replacement Of Door Panels, Door Trim Clips, Bumper Clips, Interior Accessories And Splash Guard Retainers..
Design --- Our Auto Trim Tool Sets And Trim Car Clips Are Ergonomically Designed To Be Ultra-Lightweight And Easy To Hold, Effectively Saving Effort For A Variety Of Car Interiors And Exteriors In The Shortest Amount Of Time, Without The Need To Go To An Auto Parts Store See The Different Fasteners Available, Saving Time And Money.
Features
- INCLUDES---Our car clips include 6 of the most popular sizes for GM Toyota Ford Honda and more + 5 fastener removal tools for car audio, door panels, trim strips, window trim installation or removal
- DESIGN --- Our auto trim tool sets and trim car clips are ergonomically designed to be ultra-lightweight and easy to hold, effectively saving effort for a variety of car interiors and exteriors in the shortest amount of time, without the need to go to an auto parts store See the different fasteners available, saving time and money
- HIGH QUALITY---The trim removal tool and automatic clip are made of nylon material and can be used for a long time. Durability will not break or break easily during use.
- WIDELY USED --- OEM: 91512SX0003/ 6503598/ 34201621/ 5216120010/ 91503SZ3003/ 91503SZ5003. Automatic push clips are widely used for replacement of door panels, door trim clips, bumper clips, interior accessories and splash guard retainers.
- SERVICE -- If you have any questions about the product, You can contact us by email and we will try our best to solve the problem for you.
- See more on Amazon...
Brand: Grafken | Manufacturer: Grafken CLIP
Dimensions: 0.39 x 0.39 x 0.39 inches
See On Amazon #7
Spectre Performance (42513) 1.5" Carburetor Stud with Hardware
Asin: B0008G1OY2 | Model: SPE-42513 | PartNumber: SPE-42513 | Ean: 0089601425139 | UPC: 089601425139
Integrated-Hex Design Studs For Easy Installation.
Universal Application.
Black Oxide With Gold Iridite Nuts.
Features
- 1.5 inch carburetor stud set
- Black oxide with gold iridite nuts
- Integrated-hex design studs for easy installation
- Universal application
- See more on Amazon...
First Available: 12/16/2013
Brand: Spectre | Manufacturer: Spectre
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.21 Pounds
Warranty: 3 Months
See On Amazon #8
10pcs/set Carburetor Base Carb Gaskets Open 4 bbl 1/16" Thick Fits for SBC BBC 350 Engines
Asin: B09MW2GXT4
★Compatible With Holley, Edelbrock, Carter, Afb Open Port Carburetors As Well As Rochester Quadrajet, Thermoquad, Carbs.
★4 Bbl. Carb Gasket 1/16" Thick.
★Made From High Heat Gasket Material,Which Is Corrosion Resistance, High And Low Temperature Resistance, Anti-Aging, Long Service Life..
★Compatible With Most Hot Rods And Classics Engines Including Gm (Chevy, Gmc, Olds, Cadillac, Pontiac, Buick, Ford, & Mopar (Chrysler, Dodge, Plymouth).
Features
- Compatible with most 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351w 347 352 360 390 406 427 428 429 460 351c 351m 400m 273 318 340 360 361 383 400 413 426w 440 455 330 326 Engines
- Compatible with Most Hot Rods And Classics Engines Including Gm (Chevy, Gmc, Olds, Cadillac, Pontiac, Buick, Ford, & Mopar (Chrysler, Dodge, Plymouth)
- Compatible with Holley, Edelbrock, Carter, Afb Open Port Carburetors As Well As Rochester Quadrajet, Thermoquad, Carbs
- Made From High Heat Gasket Material,which is corrosion resistance, high and low temperature resistance, anti-aging, long service life.
- 4 Bbl. Carb Gasket 1/16 Thick
- See more on Amazon...
Brand: SHLPDFM | Manufacturer: SHLPDFM
See On Amazon #9
BELOMI Oxygen Sensor Sockets, 7/8 inch (22mm) Wire Gate Accesses Sensor from Side, Premium Drive Offset Oxygen Sensor Socket Universal for Most Models of Cars, Preventing Damage to Wires
Asin: B0C5MMY5S1
【Easy To Store And Carry】: This Oxygen Sensor Sleeve With Compact And Not Heavy, Can Be Easily Placed In Various Places Of Your Car And Does Not Take Up Space For Emergency. You Can Also Store It Well When You Are Not Using It, And Take It Out When You Want To Use It..
【Why You Need】: Oxygen Sensors Are Vital, Oxygen Sensors Constantly Test The Ratio Of Fuel To Oxygen When Your Fuel Is Burned, Keeping This Ratio In A Healthy Balance Is Vital To The Long Term Health Of Your Engine. If You Are Not Clear About The Internal Parts Of Your Car, This Tool Won't Take You Too Long To Understand, It Helps Replace Your Oxygen Sensor Directly..
【Compatibility】: The Common 6-Point, 7/8" (22Mm) Socket Fits Most Oxygen Sensors And Is Compatible With Oxygen Sensors In Almost All Modern Vehicles. Great For Helping You Remove And Install With Oxygen Sensors On Your Engine..
【Careful Design】: Our Sockets Are Designed With A Standard 6-Point Slotted Design That Allows You To Remove The Oxygen Sensor With The Harness Still Attached. And The Sockets Are Offset And Compact, Allowing For Extra Leverage Even In Hard-To-Reach Places. Side Cutouts Prevent Damage To The Wires And Permanently Etched Dimensional Markings For Your Convenience..
Features
- Sturdy Materials : This offset oxygen sensor socket is made of high quality chrome vanadium steel for strength and durability to withstand years of strenuous use and to continue to be used. It ends up being very good at assisting mechanics to complete their tasks quickly and efficiently.
- Careful Design : Our sockets are designed with a standard 6-point slotted design that allows you to remove the oxygen sensor with the harness still attached. And the sockets are offset and compact, allowing for extra leverage even in hard-to-reach places. Side cutouts prevent damage to the wires and permanently etched dimensional markings for your convenience.
- Easy to Store and Carry : This oxygen sensor sleeve with compact and not heavy, can be easily placed in various places of your car and does not take up space for emergency. You can also store it well when you are not using it, and take it out when you want to use it.
- Compatibility : The common 6-point, 7/8 (22mm) socket fits most oxygen sensors and is compatible with oxygen sensors in almost all modern vehicles. Great for helping you remove and install with oxygen sensors on your engine.
- Why You Need : Oxygen sensors are vital, oxygen sensors constantly test the ratio of fuel to oxygen when your fuel is burned, keeping this ratio in a healthy balance is vital to the long term health of your engine. If you are not clear about the internal parts of your car, this tool won't take you too long to understand, it helps replace your oxygen sensor directly.
- See more on Amazon...
Brand: BELOMI | Manufacturer: BELOMI
Dimensions: 0.30 x 1.00 x 0.30 inches
See On Amazon #10
1" Ported Phenolic Carburetor Spacer 4bbl SBC BBC BB Compatible for Holley SB Chevy Ford
Asin: B086W5D77L
Fits For Holley, For Edelbrock, For Barry Grant (Demon) Sb & Bb Chevy, For Ford & Mopar. Fits All Square Bore Carburetors..
Package Includes:Bolts, Washers, Nuts, 2 Gaskets As Main Picture Shows..
Features
- 1" total height
- Package includes:bolts, washers, nuts, 2 gaskets as main picture shows.
- Fits for Holley, for Edelbrock, for Barry Grant (Demon) SB & BB Chevy, for Ford & Mopar. Fits all square bore carburetors.
- See more on Amazon...
Brand: TAKPART | Manufacturer: TAKPART
See On Amazon #11
GKmow 8 Sets Rustproof License Plate Screws Kit, Anti-Vibration Anti-Theft Car License Bolts, Self Tapping Mounting Fasteners for Auto Front and Rear License Plate Frame Cover (Black)
Asin: B0C76VDHLR | Model: GKCPLS201BL-8PS | PartNumber: GKCPLS201BL-8PS
Protective Effects: Anti-Vibration License Plate Pads Are Attached To The Back Of The License Plate To Prevent The Metal Plate From Directly Contacting The Body, Protecting The Plate And The Car Bumper Paint, Reducing Noise And Preventing Scratches To The Paint. Black License Plate Screw Caps Eliminate Fastener Visibility, Provide An Enhanced Seal To Avoid Leaks, And Keep Dust, Dirt, Grime And Road Debris Properly Away..
Widely Used: Suitable For License Plate Locks On Most Motorcycles, Trucks, Suvs, Etc. Self-Tapping Screws With Nylon Inserts, Mechanical Bolts With Metal Nuts, Suitable For Front And Rear Bumper License Plate Mounting..
Easy Installation: Easy To Install With A Simple Screwdriver. No Rattling Sound, Tighten With Foam Pad, Keep Your License Away From The Vibration Noise During Driving. Protect Your License By Replacing Previous Screws Immediately..
Durable Materials: Rustproof License Plate Screws Are Made Of Premium 100% Stainless Steel That Is Strong, Corrosion Resistant, Durable, Rustproof And Weatherproof. The Black Galvanized Finish Is Durable. Black License Plate Hardware Perfectly Decorates Your Black License Plate Or Car..
Features
- Packaging Details: License plate screws that allow you to fix 2 4 front and rear license plates. 8 pieces of high quality stainless steel screws, 8 pieces of foam pads, 8 pieces of screw washers, 8 pieces of screw covers, 8 pieces of screw covers, and 1 piece of screw wrench.
- Durable Materials: Rustproof license plate screws are made of premium 100% stainless steel that is strong, corrosion resistant, durable, rustproof and weatherproof. The black galvanized finish is durable. Black license plate hardware perfectly decorates your black license plate or car.
- Protective Effects: Anti-vibration license plate pads are attached to the back of the license plate to prevent the metal plate from directly contacting the body, protecting the plate and the car bumper paint, reducing noise and preventing scratches to the paint. Black license plate screw caps eliminate fastener visibility, provide an enhanced seal to avoid leaks, and keep dust, dirt, grime and road debris properly away.
- Easy Installation: Easy to install with a simple screwdriver. No rattling sound, tighten with foam pad, keep your license away from the vibration noise during driving. Protect your license by replacing previous screws immediately.
- Widely Used: Suitable for license plate locks on most motorcycles, trucks, SUVs, etc. Self-tapping screws with nylon inserts, mechanical bolts with metal nuts, suitable for front and rear bumper license plate mounting.
- See more on Amazon...
Brand: GKmow | Manufacturer: GKmow
Warranty: Manufacturer warranty for 30 days from date of purchase.
See On Amazon #12
Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool, 3/8-Inch Drive, 7/8-Inch (22mm), Wire Gate Accesses Sensor from Side, Preventing Damage to Wires, Universal for Most Models
Asin: B0BK98P1HX
Characteristic: Removes And Installs Oxygen Sensors On Vehicles With Computer-Controlled Engines,Common 6 Point, 7/8 In. (22Mm) Socket Fits Most Oxygen Sensors,Use With Any 3/8 Inch Drive Ratchet Or Breaker Bar,Offset Drive With Wire Gate Accesses Sensor From The Side, Not The Top, Preventing Damage To Wires..
What Will You Get: 1 X Offset Oxygen Sensor Socket. As With All Of Our Products, You Are Covered. If You Have Any Questions, Please Contact Us In Time, We Will Reply You Within 24 Hours..
Function: Even If You Don't Have A Lot Of Experience Working With Cars, You Can Replace Your O2 Sensor With This Tool To Help With Your Car's Emissions And Gas Mileage. This High Quality Tool Can Save Your Time!.
Design: The Standard 6-Point Slotted Design Allows You To Remove The Oxygen Sensor While Still Connecting The Wiring Harness, And The Socket Is Biased And Compact, Providing Extra Leverage Even In Hard-To-Reach Places, Very Convenient, Please Rest Assured Use..
Features
- High Quality Material: Made of high-quality chromium-molybdenum steel, the sleeve allows the user to apply maximum torque, while precision casting ensures accurate fit and function, strength and durability-black oxide surface treatment to prevent rust.
- Design: The standard 6-point slotted design allows you to remove the oxygen sensor while still connecting the wiring harness, and the socket is biased and compact, providing extra leverage even in hard-to-reach places, very convenient, please rest assured use.
- Characteristic: Removes and installs oxygen sensors on vehicles with computer-controlled engines,Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors,Use with any 3/8 inch drive ratchet or breaker bar,Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires.
- Function: Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. This high quality tool can save your time!
- What will you get: 1 x Offset Oxygen Sensor Socket. As with all of our products, you are covered. If you have any questions, please contact us in time, we will reply you within 24 hours.
- See more on Amazon...
Brand: NTNEV | Manufacturer: NTNEV
See On Amazon #13
RACOONA O2 Sensor Socket,Oxygen Sensor Socket Set,Car Accessories Oxygen Sensor Wrench Remover Tool and Thread Chaser Tool,Automotive O2 Oxygen Sensor Socket for Removing and Install Oxygen Sensors
Asin: B0CFPVBFFK | Model: 800YCGQCXTZ002 | PartNumber: 800YCGQCXTZ002
[Design] Special Side Cut Design Allows For Dismantling Of The Oxygen Sensor While The Wiring Harness Is Still Connected. The Socket Is Offset And Compact, Allowing For Additional Leverage Even In Difficult To Reach Areas..
[Easy To Operate] The Disassembly Tool For The Automotive Oxygen Sensor Socket Wrench And The Thread Clamp Kit Are Easy To Operate. Even If You Don't Have Much Automotive Work Experience, You Can Use This Tool To Replace Your O2 Sensor To Help With Your Car Emissions And Gasoline Mileage. Sensors Live In The Harshest Environments And May Need To Remove Some Elbow Grease. This High-Quality Tool Can Save Your Knuckles And Time!.
[Purpose] The Automotive Oxygen Sensor Sleeve Is Designed Specifically For Use With Ratchets And Circuit Breaker Rods, Used For Removing And Installing Oxygen Sensors And Hexagonal Vacuum Switches On Vehicles..
[High Quality Materials]These Sockets And Wrenches Are Forged From High-Quality Steel, With High Strength And Better Performance. By Phosphating And Electroplating, The Outer Layer Is Protected From Oxidation And Corrosion, Extending Its Service Life And Durability..
Features
- [Package Includes] 1 piece of 3/8 "Dr. ultra deep drawing knife socket (3-1/8" long), 1 piece of 3/8 "Dr. thin crowbar socket wrench (1-1/4" long), 1 piece of 1/2 "Dr. offset crowbar socket wrench (1-15/16" long), and 1 piece of M18 x 1.5mm and 1 piece of M12 x 1.25mm threaded groove with 3/8 "driver for cleaning and repairing damaged threads.
- [High Quality Materials]These sockets and wrenches are forged from high-quality steel, with high strength and better performance. By phosphating and electroplating, the outer layer is protected from oxidation and corrosion, extending its service life and durability.
- [Design] Special side cut design allows for dismantling of the oxygen sensor while the wiring harness is still connected. The socket is offset and compact, allowing for additional leverage even in difficult to reach areas.
- [Purpose] The automotive oxygen sensor sleeve is designed specifically for use with ratchets and circuit breaker rods, used for removing and installing oxygen sensors and hexagonal vacuum switches on vehicles.
- [Easy to Operate] The disassembly tool for the automotive oxygen sensor socket wrench and the thread clamp kit are easy to operate. Even if you don't have much automotive work experience, you can use this tool to replace your O2 sensor to help with your car emissions and gasoline mileage. Sensors live in the harshest environments and may need to remove some elbow grease. This high-quality tool can save your knuckles and time!
- See more on Amazon...
Brand: RACOONA | Manufacturer: RACOONA
See On Amazon #14
JEGS Carburetor Spacer | 4150 Square Bore Flange | Open Hole Design | 1 Tall | Includes Two Gaskets And Mounting Hardware
Asin: B01N2TVD54 | Ean: 0889944027652 | UPC: 889944027652
Open Hole Design Ideal For Single Plane But Will Work With Some Dual Plane Intake Manifolds.
Made From Aluminum For Weight Savings And Improved Insulation From Heat.
Includes Spacer, 2 Gaskets, And Mounting Hardware.
4150 Square Bore Mounting Flange For Holley, Edelbrock, Afb, Carter, Quick Fuel, Proform, And Other Carburetors And Throttle Bodies.
Features
- HEIGHT: 1 for street and racing applications
- 4150 SQUARE BORE MOUNTING FLANGE for Holley, Edelbrock, AFB, Carter, Quick Fuel, Proform, and other carburetors and throttle bodies
- OPEN HOLE DESIGN ideal for single plane but will work with some dual plane intake manifolds
- INCLUDES spacer, 2 gaskets, and mounting hardware
- MADE FROM ALUMINUM for weight savings and improved insulation from heat
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 1.50 x 6.30 x 6.70 inches | Weight: 2.00 pounds
See On Amazon #15
1 SET Black Carb spacers 1" Tall Open Phenolic Carburetor Spacer Compatible with Holley 4150/4160 4bbl. SBC BBC Carb
Asin: B0B48PC5LR
③Phenolic Material:Phenolic Material Is A Type Of Plastic Resin Which Has Excellent Insulating Properties,Made Of Phenolic Resin And Engineered To Reduce Heat Transfer From The Intake Manifold To The Carburetor That Provides A Denser Air/Fuel Mixutre For Increased Power And Efficiency..
⑤Open Design Spacers:The Open Design Spacers Increase Plenum Volume For Improved High Rpm Power, While 4-Hole Designs Increase Mixture Velocity For Improved Low-Speed And Mid-Range Torque..
④Package List:Package Includes Mounting Hardware And Gaskets..
②Thickness: 1".
Features
- Compatible Information:Compatible with 4 barrel carbs with a square bore base like the Holley 4150/4160, Barry Grant, Carter and Edelbrock,that are used on many Small/Big Block Chevy, Ford and Chrysler Mopar engines.
- Thickness: 1
- Phenolic material:Phenolic material is a type of plastic resin which has excellent insulating properties,Made of phenolic resin and engineered to reduce heat transfer from the intake manifold to the carburetor that provides a denser air/fuel mixutre for increased power and efficiency.
- Package list:Package Includes mounting hardware and gaskets.
- Open Design Spacers:The open design spacers increase plenum volume for improved high rpm power, while 4-hole designs increase mixture velocity for improved low-speed and mid-range torque.
- See more on Amazon...
Brand: SHLPDFM | Manufacturer: SHLPDFM
See On Amazon #16
AICEL Battery Hold Down Sets, Billet Aluminum Alloy Car Battery Tie Down Bracket, Automotive Crossbar Holder Lock Mount with Galvanized Iron J Bolts, Car Accessories for Most Vehicles (Red)
Asin: B0CGCKZ7WN | Model: Battery Hold Down Sets | PartNumber: Battery Hold Down Sets
【Applicability】: For Most 21, 22F, 22Hf, 22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70, 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46 , 47, 48, 49, 85, 86, 90, 91, 92, 93, 95R, 96R, 97R, 98R, 99, 124 And 140R Batteries..
【Package】: You Will Receive 1 X Battery Clip + 2 X J Hooks + 2 X Nuts + 4 X Spacers, A Full Set Of Mounting Accessories For Your Convenience. Note: This Car Battery Hold Down Sets Do Not Fit Between Some Battery Surface Raised Vent Caps..
【Function】: When The Original Battery Holder Of The Car Is Aging Or Unstable, The Battery Clamps Can Be A Good Replacement To Keep The Battery In Its Original Position Under Any Driving Conditions..
【Size】: The Size Of The Bracket Is 9.2 X 1.7 X 0.7 Inches. We Suggest You Refer To The Bic Battery Size Chart Or Measure The Actual Width And Height Of The Battery Before Ordering To Make Sure It Fits Your Car Battery..
Features
- Material : Made of aluminum alloy and galvanized iron, sturdy and not easy to deform or break. Rust and corrosion resistant, long service life. Smooth surface, eliminate abrasions and burrs. The bracket is sandblasted and anodized for a bright and textured finish.
- Size : The size of the bracket is 9.2 x 1.7 x 0.7 inches. We suggest you refer to the BIC battery size chart or measure the actual width and height of the battery before ordering to make sure it fits your car battery.
- Applicability : For most 21, 22F, 22HF, 22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70, 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46 , 47, 48, 49, 85, 86, 90, 91, 92, 93, 95R, 96R, 97R, 98R, 99, 124 and 140R batteries.
- Function : When the original battery holder of the car is aging or unstable, the battery clamps can be a good replacement to keep the battery in its original position under any driving conditions.
- Package : You will receive 1 x battery clip + 2 x j hooks + 2 x nuts + 4 x spacers, a full set of mounting accessories for your convenience. Note: This car battery hold down sets do not fit between some battery surface raised vent caps.
- See more on Amazon...
Brand: AICEL | Manufacturer: AICEL
Dimensions: 0.20 x 3.10 x 0.60 Inches | Weight: 0.02 pounds
Warranty: 0.2
See On Amazon #17
1" Phenolic Carburetor Spacer
Asin: B0B49Q8JFZ
Package Includes:1 X 1" Phenolic Plastic Spacer, 2 X Gaskets, 4 X Bolts, 4 X Washers, 4 X Nuts..
6-Month Warranty.If You Are Not Satisfied, 100% Refund In 30 Days From The Day You Place The Order..
Thickness: 1".
Features
- Material: phenolic plastic;Spacer Style: Open
- Thickness: 1
- Package includes:1 x 1 phenolic plastic spacer, 2 x gaskets, 4 x bolts, 4 x washers, 4 x nuts.
- 6-month warranty.If you are not satisfied, 100% refund in 30 days from the day you place the order.
- See more on Amazon...
Brand: TAKPART | Manufacturer: TAKPART
See On Amazon #18
X-AVION Full Flow Round 9''X2'' Air Filter Assembly Kit Black Washable and Resuable Air Cleaner with Mounting Stud & Wing Nut Kit Air Cleaner for 4 Barrel Carburetor V8 Chevy F rd
Asin: B09D3MWH8L | Model: 100.1609A | PartNumber: 100.1609A | Ean: 0618087032496 | UPC: 618087032496
Fitment: 4 Barrel Carburetors, Commonly Found On Chevy, Chrysler, Ford V8 Engines..
Cleanable And Reusable, Can Deliver Outstanding Engine Protection And Come In Wide Range Of Applications..
Top Type: Steel Trim & Cotton Gauze Washable. Base Type: Flat Stamped Steel. Element Type: 9" X 2" Tall - Cotton Gauze Washable Element.
Application: Universal To Any Carburetor With A 5.125"Neck Diameter..
Features
- X-AVION round flat top air cleaner set includes: 1 x 9" Anodized Top / 1x Anodized Base / 1 x 9" High-Flow Black Washable & Reusable Filter / 1 x Muting stud / 1 x Wing nut.
- Application: Universal to any carburetor with a 5.125neck diameter.
- Fitment: 4 barrel carburetors, commonly found on Chevy, Chrysler, Ford V8 engines.
- Top Type: Steel Trim & Cotton Gauze Washable. Base Type: Flat Stamped Steel. Element Type: 9 x 2 Tall - Cotton Gauze Washable Element
- Cleanable and reusable, can deliver outstanding engine protection and come in wide range of applications.
- See more on Amazon...
Brand: X-AVION | Manufacturer: X-AVION
See On Amazon #19
1 SET SHLPDFM Carb Spacer 1" Aluminum Open Carburetor Spacer For Chevy Ford Mopar Square Bore Holley-Edelbrock With 3/8" Vaccum Tube
Asin: B0B8Z6FYG7
◆Thickness: 1".
◆High Quality Material:Made Of High Quality Aluminum Material,Which Is Corrosion Resistance, High And Low Temperature Resistance, Anti-Aging, Long Service Life..
◆Open Design Spacers:The Open Design Spacers Increase Plenum Volume For Improved High Rpm Power..
◆Complete Accessories:Comes Complete As Pictured With Spacer,Bolts, Washers, Nuts, 3/8" Vacuum Tube & Plug If Needed.
Features
- Fitment:It fits most Holley and Edelbrock Carburetors that have a Square Bore.It will Not Fit Holley Spread Bore Carburetors or Quadra-jet Carburetors.
- Complete accessories:Comes Complete As Pictured With Spacer,Bolts, Washers, Nuts, 3/8 Vacuum Tube & Plug If Needed
- Thickness: 1
- Open Design Spacers:The open design spacers increase plenum volume for improved high rpm power.
- High quality material:Made of high quality aluminum material,which is corrosion resistance, high and low temperature resistance, anti-aging, long service life.
- See more on Amazon...
Brand: SHLPDFM | Manufacturer: SHLPDFM
See On Amazon #20
1 SET Black Carb spacers 1/2" Tall Open Phenolic Carburetor Spacer Compatible with Holley 4150/4160 4bbl. SBC BBC Carb
Asin: B0B495Y39B
③Phenolic Material:Phenolic Material Is A Type Of Plastic Resin Which Has Excellent Insulating Properties,Made Of Phenolic Resin And Engineered To Reduce Heat Transfer From The Intake Manifold To The Carburetor That Provides A Denser Air/Fuel Mixutre For Increased Power And Efficiency..
⑤Open Design Spacers:The Open Design Spacers Increase Plenum Volume For Improved High Rpm Power, While 4-Hole Designs Increase Mixture Velocity For Improved Low-Speed And Mid-Range Torque..
④Package List:Package Includes Mounting Hardware And Gaskets..
②Thickness: 0.5",1/2".
Features
- Compatible Information:Compatible with 4 barrel carbs with a square bore base like the Holley 4150/4160, Barry Grant, Carter and Edelbrock,that are used on many Small/Big Block Chevy, Ford and Chrysler Mopar engines.
- Thickness: 0.5,1/2
- Phenolic material:Phenolic material is a type of plastic resin which has excellent insulating properties,Made of phenolic resin and engineered to reduce heat transfer from the intake manifold to the carburetor that provides a denser air/fuel mixutre for increased power and efficiency.
- Package list:Package Includes mounting hardware and gaskets.
- Open Design Spacers:The open design spacers increase plenum volume for improved high rpm power, while 4-hole designs increase mixture velocity for improved low-speed and mid-range torque.
- See more on Amazon...
Brand: SHLPDFM | Manufacturer: SHLPDFM
See On Amazon
Looking For Something Else?
Search