Seachoice 95601-1.875" O.D Aluminum Rudder Anode
Asin: B0B4MD9WF5 | Ean: 0719249956015 | UPC: 719249956015
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features
- Seachoice 95601 Rudder & Trim Tab Anode w/Allen Screw, Aluminum, Model R1, Size 1-7/8" dia. x 1/4"Aluminum suitable for salt and brackish water. High-quality, cadmium-free anodes Higher protection than zinc 2.5 Times lighter than zinc Corrodes less than zinc Ideal for aluminum hulls Installation hardware included
- See more on Amazon...
Brand: SEACHOICE
Dimensions: 1.00 x 4.00 x 8.00 inches
See On Amazon Similar To Seachoice 956011.875 O.D Aluminum Rudder
#1
Bullnose Rudder clamp on boat rudder fits a 1.125" transom trolling motor shaft. Commonly used for, inflatable Pontoon, Pelican Bass Raider 10E, fishing Kayak, Canoe, Jon boat, etc. USA Manufactured
Asin: B01FRLDP26 | Model: 868527000206A | PartNumber: 868527000206A | Ean: 0868527000206, 0744288437614 | UPC: 744288437614, 868527000206
Essential - In Most Cases It Helps Hold A True Course At Both A Slow And High Trolling Speeds. Customers Have Also Said, “It Prevents The Boat From Spinning As Much When The Motor Is Off”. Most Tiny Boats Will Benefit From Having Some Kind Of A Rudder Set Up In The Back Vs Not Having A Rudder At All. Only Takes A Few Minutes To Install And You Are Ready To Go..
Bow Mount - Fits The Minn Kota, Edge, Maxxum, And Fortrex. The Bow Mount Motor Must Be A Hand Cable Pull, Not Self Deploy. Self Deploy Will Not Work Because The System Requires The Shaft To Slide Up And Down Right Where The Rudder Needs To Be Attached. However, A Hand Cable Pull Will Allow You To Carefully Bring The Motor Up Out Of The Water On The Motor Mount. Your Bow Mount Setup Needs To Have 1' Of Shaft Sticking Out From The End Of The Platform Allowing Enough Space To Attach The Rudder..
Quality - Manufactured In The Usa With High Quality Parts & Material To Help Ensure You Have A Stress-Free Fishing Experience. It Is Manufactured From Impact Plastic For Durability And Comes With Stainless Steel Screws. It Is Built Strong So You Don't Have To Worry About It Coming Loose, Allowing You To Focus More On Fishing. Patent No. D712,341S.
Fit - The Bullnose Rudder Is A Boat Rudder That Fits 1 1/8" (1.125") Transom Mount Trolling Motors. Please Note, It Will Not Work On A Self Deploy Bow Mount Trolling Motor. It Measures 10.5" High X 4.75" Wide And Fits A 1 1/8" Shaft Diameter. It's Most Commonly Used For "But Not Limited To" Minn Kota Trolling Motor, Motorguide Trolling Motors, Newport Vessel Trolling Motor, Etc. Common Tiny Boats Used Are, Inflatable Pontoon, Pelican Bass Raider 10E, Fishing Kayak, Canoes, Jon Boats, And More..
Features
- PERFECT SOLUTION - Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S
- FIT - The Bullnose Rudder is a boat rudder that fits 1 1/8 (1.125) transom mount trolling motors. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5 high x 4.75 wide and fits a 1 1/8 shaft diameter. It's most commonly used for but not limited to minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more.
- ESSENTIAL - In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, it prevents the boat from spinning as much when the motor is off . Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install and you are ready to go.
- QUALITY - Manufactured in the USA with high quality parts & material to help ensure you have a stress-free fishing experience. It is manufactured from impact plastic for durability and comes with stainless steel screws. It is built strong so you don't have to worry about it coming loose, allowing you to focus more on fishing. Patent no. D712,341S
- BOW MOUNT - Fits the Minn Kota, EDGE, MAXXUM, and FORTREX. The bow mount motor must be a hand cable pull, NOT self deploy. Self deploy will not work because the system requires the shaft to slide up and down right where the rudder needs to be attached. However, a hand cable pull will allow you to carefully bring the motor up out of the water on the motor mount. Your bow mount setup needs to have 1' of shaft sticking out from the end of the platform allowing enough space to attach the rudder.
- See more on Amazon...
Brand: Bullnose Products | Manufacturer: Bullnose Products LLC
Dimensions: 1.50 x 10.50 x 6.75 inches | Weight: 0.54 Pounds
See On Amazon #2
NyVoozy Rudder Clamp on Boat Rudder Fits Most 24 to 55" Trolling Motors, Kayak Rudder Kit Designed for Kayak, Canoe, Angling Boat, etc, Electric Motors Rudder Clamp Widely Use for Canoe, Jon boat, etc
Asin: B09N9G36J8 | Ean: 0767587303916 | UPC: 767587303916
Premium Material-The Body Of Our Trolling Motor Accessories Is Made From Pa66gf30 Which Is A New And Premium Material, It Can Last Long Time. And The Screws Are Made From Su304 Which Is One Kind Of Anti-Rust And Resistant To Hydrochloric Acid Corrosion Material, So You Could Use It In The Seawater..
Easy Use-It Can Be Used When It Is Installed In The Boat Trolling Motors, And It Is Easy To Operate Without Any Operation Skills. Because The Rudder Accessories Let You Keep You On The Right Way And Let You Reduce Wind Resistance, So Your Trolling Motor Battery Lasted Longer..
Easy Install-Very Easy To Install, With Screws, You Could Install Our Trolling Motor Mount To Trolling Motor Only A Few Minutes..
Widely Use For-Our Kayak Rudder Kit Measures 10.5" High X 4.75" Wide And Suitable For A 23-32Mm" Shaft Diameter Which Is Boat Rudder Clamp Compatible With Most 24-55Lb Transom Mount Trolling Motors. It's Commonly Used For Motorguide Trolling Motors, Minn Kota Trolling Motor, Newport Vessel Trolling Motor, Etc. Designed For Kayak, Canoe, Seayak, Angling Boat, Etc..
Features
- OBVIOUSLY IMPROVED-Adding the boat rudder to your boat trolling motor made the trolling motor more stable as trolling motors are known for lack of steering especially when the big wind picks up. With trolling motor stabilizer, even in the big wind, the direction is in your own hand, don't worry rudder out of control any more.
- WIDELY USE FOR-Our kayak rudder kit measures 10.5 high x 4.75 wide and suitable for a 23-32MM shaft diameter which is boat rudder clamp compatible with most 24-55lb transom mount trolling motors. It's commonly used for motorguide trolling motors, minn kota trolling motor, newport vessel trolling motor, etc. Designed for kayak, canoe, seayak, angling boat, etc.
- PREMIUM MATERIAL-The body of our trolling motor accessories is made from PA66GF30 which is a new and premium material, it can last long time. And the screws are made from SU304 which is one kind of anti-rust and resistant to hydrochloric acid corrosion material, so you could use it in the seawater.
- EASY INSTALL-Very easy to install, with screws, you could install our trolling motor mount to trolling motor only a few minutes.
- EASY USE-It can be used when it is installed in the boat trolling motors, and it is easy to operate without any operation skills. Because the rudder accessories let you keep you on the right way and let you reduce wind resistance, so your trolling motor battery lasted longer.
- See more on Amazon...
Brand: NyVoozy | Manufacturer: NyVoozy
See On Amazon #3
XTPTFABS Paddle Boat Pedalboat Rudder Kit Compatible with 3, 4, 5 and 5 Slider Pedalboats,KL Industries, Sea Hawk-Suitable for Various Foot Boards(1pcs Pedalboat Rudder Kit with Stainless Hardware)
Asin: B0CM2TDHC1
√【High-Quality】:Made From High-Density Polyethylene, The 1/4 "Thick (Hdpe) Sheet Has Excellent Impact Resistance, Wear Resistance, And Low Friction Coefficient. The Material Also Has Very High Wear Resistance..
√【Note】:Please Confirm That The Parts Are The Correct Ones You Need Before Purchasing. If You Are Not Sure, Please Contact Us For Verification..
√【Simple Installation】:Direct Replacement, Not Require Any Modification. Use R-Shaped And Cylindrical Pins Directly To Secure The Pedalboard Rudder Kit. Note That When The Ship Is In Water, The Rudder Should Be Installed Vertically. On The Contrary, When The Ship Is Pulled Ashore, It Needs To Be Installed Horizontally.
√【Packaging Includes】:1 Set Of Pedalboat Rudder Kit.Stainless Hardware Included. Stainless Steel Clevis And Pin Included.
Features
- Compatible With : Paddle Boat Pedalboat Rudder Kit Fits 3, 4 , 5 and 5 Slider Pedalboats,Sea Hawk,KL Industries
- Packaging includes :1 set of Pedalboat Rudder Kit.Stainless hardware included. Stainless Steel clevis and pin included
- High-Quality :Made from high-density polyethylene, the 1/4 thick (HDPE) sheet has excellent impact resistance, wear resistance, and low friction coefficient. The material also has very high wear resistance.
- Simple Installation :Direct replacement, NOT require any modification. Use R-shaped and cylindrical pins directly to secure the Pedalboard Rudder Kit. Note that when the ship is in water, the rudder should be installed vertically. On the contrary, when the ship is pulled ashore, it needs to be installed horizontally
- Note :Please confirm that the parts are the correct ones you need before purchasing. If you are not sure, please contact us for verification.
- See more on Amazon...
Brand: XTPTFABS | Manufacturer: XTPTFABS
Warranty: 1 year
See On Amazon #4
KUAFU Boat Rudder Compatible with Sundolphin 3 4 5 and 5 Slider Pedalboats/KL Industries/Sea Hawk Pedalboat Rudder Kit PE Plastic (Black)
Asin: B0CMCM98FN | Model: GO-2862 | PartNumber: GO-2862
Feature: Color: Black. Made Of High Quality Pe Plastic. High Duty Enough To Handle With Any Harsh Weather And Condition, Not Easy To Crack, Good Tool For Water Sports..
Installation: Direct Use Spring, Cylindrical Pin To Install This Boat Rudder. We Highly Recommend Professional Installation..
Package Include: 1 Set Of Pedalboat Rudder Kit (Including The Mounting Accessories). Please Note: Not Include The Instruction..
Function: By Moving The Boat Rudder To The Left And Right, It Can Change The Direction Of The Water Flow. A Force Is Generated That Helps Turn The Ship, Allowing The Operator To Change The Direction Of The Ship's Movement In The Water..
Features
- Product Application: This Boat Rudder compatible with Sundolphin 3, 4 , 5 and 5 Slider Pedalboats, also fits the following KL Industries and Sea Hawk. Please confirm carefully before purchasing.
- Function: By moving the Boat Rudder to the left and right, it can change the direction of the water flow. A force is generated that helps turn the ship, allowing the operator to change the direction of the ship's movement in the water.
- Feature: Color: Black. Made of high quality PE Plastic. High duty enough to handle with any harsh weather and condition, not easy to crack, good tool for water sports.
- Package include: 1 set of Pedalboat Rudder Kit (Including the mounting accessories). Please note: Not include the instruction.
- Installation: Direct use spring, cylindrical pin to install this boat rudder. We highly recommend professional installation.
- See more on Amazon...
Brand: KUAFU | Manufacturer: Scarman LLC
See On Amazon #5
Trolling Motor Accessories, Haoguo Paddle Boat Parts, Boat Rudder Fits Most 24-55 Thrust Trolling Motors, Great for Pontoon, Fishing Kayak, Canoe, Jon Boat
Asin: B09NPT65T7 | Model: 1 | PartNumber: 1 | Ean: 0779288407145 | UPC: 779288407145
Universal Mount - Compatible With Most Electric Trolling Motors (24 To 55 Thrust). Ideal For Use As A Canoe Rudder, Or A Inflatable Pontoon Rudder, Kayak Rudder, Or Pelican Bass Raider 10E Rudder.
Bow Mount - Compatible With Edge, Minn Kota, And Fortrex, Etc. The Bow Mounting Motor Must Be Manually Drawn Rather Than Self-Deployed.
Easy Installation - Complimentary Socket Wrench For Easy Installation, Very Easy. You May Even Mount It With The Short End Down (Upside Down) For Shorter Motors.
More Control - Easy Turns When Steering, Provides Better Control In Wind Or Other Most Weather Environments, Reduces The Need For Oars, It Really Helps To Keep Your Boat Heading In The Wind And Reduces Your Boat Rotation As Much As Possible When The Motor Is Turned Off.
Features
- STURDY & DURABLE - The rudder is made of stainless steel material, and also equipped with stainless steel screws and jam nut to improve stability, rust and corrosion resistance. It is sturdy and durable to extend the service life and allowing you to focus more on fishing
- MORE CONTROL - Easy turns when steering, provides better control in wind or other most weather environments, reduces the need for oars, it really helps to keep your boat heading in the wind and reduces your boat rotation as much as possible when the motor is turned off
- UNIVERSAL MOUNT - Compatible with most electric trolling motors (24 to 55 thrust). Ideal for use as a canoe rudder, or a inflatable pontoon rudder, kayak rudder, or pelican bass raider 10E rudder
- EASY INSTALLATION - Complimentary socket wrench for easy installation, very easy. You may even mount it with the short end down (upside down) for shorter motors
- BOW MOUNT - Compatible with EDGE, Minn Kota, and FORTREX, etc. The bow mounting motor must be manually drawn rather than self-deployed
- See more on Amazon...
Brand: Haoguo | Manufacturer: Haoguo
Dimensions: 1.00 x 2.00 x 1.00 Inches
See On Amazon #6
Borogo Kayak Rudder, Fishing Watercraft Canoe Boat Rudder (Nylon Glass Fiber) Replacement Parts Foot Control Steering System Kayak Accessories with Control Line Kit
Asin: B07V3RV32S | Model: BT-101 | PartNumber: BT-101
Installation And Use - Able To Be Secured When In The Raised Position To Prevent The Rudder From Self Deploying;Wires Run From The Blade To Your Foot Brace Which Are Used To Control The Rudder During Paddling..
Use Widely - Work With Foot Control (Not Included) To Achieve The Effect Of Direction Change And Designed For Seayak, Kayak, Canoe, Angling Boat, Etc.
The Controlling Direction - Mounts On The Stern Of Your Kayaks Vertically;Gain Control Of Your Kayak In Windy Or Turbulent Conditions..
Sturdy & Tough - Material: Nylon & 304 Stainless Steel；Pin Measures Approximately 1.8" In Length And 0.4" In Diameter..
Features
- The Kayak Rudder Size - Size: Approx. 47 *15.5 * 14.2cm / 18.5 * 6.1 * 5.6 in (L * W * H) Rudder blade length: Approx. 45cm / 17.7in
- Sturdy & Tough - Material: Nylon & 304 stainless steel Pin measures approximately 1.8 in length and 0.4 in diameter.
- Installation And Use - Able to be secured when in the raised position to prevent the rudder from self deploying;Wires run from the blade to your foot brace which are used to control the rudder during paddling.
- The Controlling Direction - Mounts on the stern of your kayaks vertically;Gain control of your kayak in windy or turbulent conditions.
- Use Widely - Work with foot control (Not Included) to achieve the effect of direction change and designed for seayak, kayak, canoe, angling boat, etc
- See more on Amazon...
Brand: Borogo | Manufacturer: Borogo
Dimensions: 3.15 x 15.75 x 11.81 inches | Weight: 0.22 Pounds
See On Amazon #7
Aluminum 75mm Long RC Boat Rudder with Water Pickup Absorbing Steering for Electric/Gas Power Remote Control Model Parts CNC
Asin: B07FS9KBYZ | Model: 691-693 | PartNumber: 691-693
Compatible With:40Cm-60Cm Rc Boat.
Produced By Hobbypark ,Well Made And Durable,100% New.
Package Include: 1 Piece.
Made Of Aluminum.
Features
- Size:75x45mm(LxW)
- Made of Aluminum
- Compatible with:40cm-60cm RC Boat
- Package include: 1 Piece
- Produced By HobbyPark ,Well made and durable,100% New
- See more on Amazon...
Brand: Hobbypark | Manufacturer: DNhobby
Weight: 0.04 pounds
See On Amazon #8
Pedal Boat 2 3 5 Seater Pedalboat Rudder Kit Fits Sundolphin Sea Hawk KL Industries
Asin: B09C4H5K8R | Ean: 0761571956508 | UPC: 761571956508
Hdpe Plastic For Excellent Marine Wear..
Black Colour Material..
Stainless Hardware Included..
Fits Sundolphin 3, 4 , 5 And 5 Slider Pedalboats, Kl Industries, Sea Hawk..
Features
- Rudder Kit.
- Fits Sundolphin 3, 4 , 5 and 5 Slider Pedalboats, KL Industries, Sea Hawk.
- HDPE plastic for Excellent Marine wear.
- Stainless hardware included.
- Black Colour Material.
- See more on Amazon...
Brand: TECHVALET | Manufacturer: TECHVALET
See On Amazon #9
Aosekaa Kayak Rudder, Canoe Boat Rudder, Fixation Boating Supplies Foot Control Watercraft Rudder Boat Rear Tail for Angling Boat, Canoeing Parts
Asin: B0CB82WJV2
【Easy To Install】: Horizontal Center Distance Between Two Holes Is 12.5Cm/4.92Inch, Mounts On The Stern Of Your Kayaks Vertically, Simple To Installation..
【Good Accessories】: Canoe Boat Rudder Is A Good Replacement Part Steering System Kayak Accessories For Sailing, Kayaking, Canoeing, Fishing Boats, Etc..
【Premium Material】: The Kayak Boat Rudder Is Made Of Nylon Material, High Strength, , Can Better Control The Direction When Driving..
【Kayak Rudder】: Kayak Tail Rudder Direction Adjustment Controller, Enhanced Nylon Marine Steering Rudder, Length: 53Cm/20.87Inch..
Features
- Widely Use : Used in conjunction with foot control (not included) to achieve the effect of controlling the direction of the rudder blade when paddling.
- Kayak Rudder : Kayak tail rudder direction adjustment controller, enhanced nylon marine steering rudder, length: 53cm/20.87inch.
- Easy to Install : Horizontal center distance between two holes is 12.5cm/4.92inch, mounts on the stern of your kayaks vertically, simple to installation.
- Premium Material : The kayak boat rudder is made of nylon material, high strength, , can better control the direction when driving.
- Good Accessories : Canoe Boat Rudder is a good replacement part steering system kayak accessories for sailing, kayaking, canoeing, fishing boats, etc.
- See more on Amazon...
Brand: Aosekaa | Manufacturer: Aosekaa
See On Amazon #10
Sea-Lect Designs Replacement Rudder Cable Tubing Kit
Asin: B07Z77H6XP | Model: K748010-1 | PartNumber: K748010-1 | Ean: 0656566017701 | UPC: 656566017701
If You Also Need Rudder Cable, See Seperate Amazon Listing For Replacement Rudder Cable Kit (K748020-1).
A (Tubing Size): 3/16" / B (Tube Length): 15' / C (Inner Diameter): 5/32".
Set Includes: Two (2) 15' Sections Of 3/16" Rudder Cable Tubing And Ten (10) 3/16" Ul Cable Clamps (K428232)..
Features
- Use to either replace worn-out rudder cable tubing, or for installing a new rudder into your boat
- Set Includes: Two (2) 15' Sections of 3/16 Rudder Cable Tubing and Ten (10) 3/16 UL Cable Clamps (K428232).
- If you also need Rudder Cable, see seperate Amazon listing for Replacement Rudder Cable Kit (K748020-1)
- A (Tubing Size): 3/16 / B (Tube Length): 15' / C (Inner Diameter): 5/32
- See more on Amazon...
Brand: Sea-Lect Designs | Manufacturer: Sea-Lect Designs
See On Amazon #11
Boat Rudder Clamp for Most 24-55 Thrust Trolling Motors Accessories, Fits Fishing Kayak, Canoe, Pontoon (Installed 0.94-1.14" and 1.18-1.37" Shaft Diameter)
Asin: B0BW93ZTSJ
Easy To Operate Control: Provides Better Direction Control In A Variety Of Winds And Extreme Weather, Reduces The Resistance Of The Pulp, Helps Maintain And Control The Direction Of The Boat, Helps Your Boat Travel In The Wind, And Minimizes Your Boat Rotation When The Motor Is Off..
Simple Installation - The Product Contains Instructions And Installation Is Simple, If You Have Any Problems, Please Contact Us In Time, We Will Reply To Your Email As Soon As Possible..
Premium Materials: The Rudders Are Made Of High Quality Materials And Equipped With Screws And Nuts To Improve Stability And Durability To Extend The Life Of The Product..
Compatible With Edge, Minn Kota, Fortrex And More. The Bow Mounting Motor Must Be Manually Drawn Rather Than Self-Deployed..
Features
- Applicable Models: Compatible with most electric trawl motors (24 to 55 thrusts). Suitable for canoe rudders, inflatable pontoon rudders, kayak rudders, pelican bass Marauder 10E rudders, etc. The product improves the steering ability of the trawl motor and prolongs the working time of the motor.
- Compatible with EDGE, Minn Kota, FORTREX and More. The bow mounting motor must be manually drawn rather than self-deployed.
- Easy to Operate Control: Provides better direction control in a variety of winds and extreme weather, reduces the resistance of the pulp, helps maintain and control the direction of the boat, helps your boat travel in the wind, and minimizes your boat rotation when the motor is off.
- Premium Materials: The rudders are made of high quality materials and equipped with screws and nuts to improve stability and durability to extend the life of the product.
- Simple Installation - the product contains instructions and installation is simple, if you have any problems, please contact us in time, we will reply to your email as soon as possible.
- See more on Amazon...
Brand: Fennoral | Manufacturer: Fennoral
Warranty: 6 Month
See On Amazon #12
Sea-Lect Designs Trucourse Rudder
Asin: B008ALX8KA | Model: K748150 | PartNumber: K748150 | Ean: 0656566005883 | UPC: 656566005883
A: 17" / B: 3" / C: 3/8" / D: 6-1/4" / E: 4-1/4".
Rudder Made In The Usa! (Everett, Wa).
Mounting Gudgeons And Rudder Control Footbraces Sold Separately.
Made From Injection Molded Fiberglass/Nylon.
Features
- A great way to add a rudder to any kayak, canoe or other watercraft.
- Made from Injection molded fiberglass/nylon
- A: 17 / B: 3 / C: 3/8 / D: 6-1/4 / E: 4-1/4
- Mounting gudgeons and rudder control footbraces sold separately
- Rudder made in the USA! (Everett, WA)
- See more on Amazon...
Brand: Sea-Lect Designs | Manufacturer: Sea-Lect Designs
Dimensions: 8.00 x 18.00 x 6.00 inches | Weight: 1.50 Pounds
See On Amazon #13
uxcell RC Boat Rudder with Single Servo Arm,Rudder Pad Thickness 4.4mm 1 Set
Asin: B07Q6HYPSG | Model: a19012700ux0364 | PartNumber: a19012700ux0364
Servo Arm Size - Feature: Single Side Arm; End Big Hole Diameter: 3Mm; Arm Hole Diameter: 2Mm; Hole Distance 1 To Center Hole: 14Mm; Hole Distance 2 To Center Hole: 18Mm..
Package Content - 1*Rudder Pad + 1*Servo Arm(With A Screw) + 1*Shaft Sleeve + 1*O Ring Washer + 1*Mini Hex Wrench..
Feature - There Are Two Copper Gears Be Fixed On The End Of The Sleeve To Ensure That The Rudder Work Smoothly And Stably.It Is Used For Rc Boat, Ship, Marine,Etc..
Rudder Pad Size - Straight Side Height: 28Mm; Hypotenuse Side Height: 26Mm; Straight Top Side Length: 21Mm; Hypotenuse Bottom Side Length: 16Mm; Thickness: 4.4Mm..
Features
- MATERIAL - rudder pad: glass fiber extension nylon; shaft: stainless steel; shaft sleeve: copper.
- RUDDER PAD SIZE - straight side height: 28mm; hypotenuse side height: 26mm; straight top side length: 21mm; hypotenuse bottom side length: 16mm; thickness: 4.4mm.
- SERVO ARM SIZE - feature: single side arm; end big hole diameter: 3mm; arm hole diameter: 2mm; hole distance 1 to center hole: 14mm; hole distance 2 to center hole: 18mm.
- FEATURE - there are two copper gears be fixed on the end of the sleeve to ensure that the rudder work smoothly and stably.It is used for RC boat, ship, marine,etc.
- PACKAGE CONTENT - 1*rudder pad + 1*servo arm(with a screw) + 1*shaft sleeve + 1*O ring washer + 1*mini hex wrench.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
Camp R-4 5 Rudder Zinc
Asin: B07GD6GBQK | Model: Camp R-4; 5 Rudder Zinc | PartNumber: Camp R-4; 5 Rudder Zinc
Brand: CAMP
Weight: 4.19 Pounds
See On Amazon #15
B & S Marine Anodes Rudder ZINC 2IN Dia
Asin: B07BD1L7Y6 | Ean: 0819602011150 | UPC: 819602011150
Brand: B&S Marine Anodes | Manufacturer: B&S Marine Anodes
Weight: 1.00 Pounds
See On Amazon #16
VGEBY Kayak Rudder, Fishing Canoe Boat Rudder Tail Vane Rudder Set for Sea Kayaks Fishing Boat Ship Boating Supplies Rudder Bracket Kayak Rudder Kit
Asin: B08LNKB73P
◆ Good Performance: Light Weight, Easy To Install And Use, A Good Attachment For Replacing Worn, Damaged Or Old Rear Rudder..
◆ Guarantee: We Strive To Provide A Better Customer Experience. In Terms Of Any Problem Of This Product, You Can Send Emails As Soon..
◆ High-Grade Material: Kayak Rudder Is Made Of High‑Quality Materials, Strong, Wear‑Resistant And Durable..
◆ Applicable Sports: This Fishing Canoe Boat Rudder Is Suitable For Sea Kayaks, Fishing Boat, Canoeing, Etc..
Features
- FINE WORKMANSHIP: With professional manufacturing, stable performance and high reliability.
- APPLICABLE SPORTS: This Fishing Canoe Boat Rudder is suitable for sea kayaks, fishing boat, canoeing, etc.
- GOOD PERFORMANCE: Light weight, easy to install and use, a good attachment for replacing worn, damaged or old rear rudder.
- HIGH-GRADE MATERIAL: Kayak Rudder is made of high quality materials, strong, wear resistant and durable.
- GUARANTEE: We strive to provide a better customer experience. In terms of any problem of this product, you can send emails as soon.
- See more on Amazon...
Brand: VGEBY | Manufacturer: VGEBY
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.72 Pounds
See On Amazon #17
B & S Marine Anodes Rudder ZINC 4IN Dia.
Asin: B079WK99P1 | Ean: 0819602010719 | UPC: 819602010719
Brand: B&S Marine | Manufacturer: B&S Marine
Weight: 3.00 Pounds
See On Amazon #18
Hobie - Rudder Mount-Mir - 81350001
Asin: B004CGCWZY | Ean: 0792176699767 | UPC: 792176699767
Brand: Hobie | Manufacturer: HOBIE
See On Amazon #19
Hobie - Rudder Blade - Small / Twist-N - 81395201
Asin: B008VGQ5O0 | Ean: 0792176956174 | UPC: 792176956174
Does Not Come With Installation Hardware.
Standard Rudder Of The Hobie Sport, Revolution 11/13 And Outback.
Features
- Replacement standard rudder for Hobie Mirage Twist and Stow rudders
- Standard rudder of the Hobie Sport, Revolution 11/13 and Outback
- Does not come with installation hardware
- See more on Amazon...
Brand: Hobie | Manufacturer: Hobie
Dimensions: 12.00 x 2.00 x 8.00 inches | Weight: 1814.00 pounds
See On Amazon #20
Sea Sure 3 Hole Bottom Rudder Pintel - 8mm - Various Sizes 32mm
Asin: B076VPTZ8V | Ean: 5036830073421
Brand: Seasure | Manufacturer: Seasure
Weight: 0.44 Pounds
See On Amazon
Looking For Something Else?
Search