HUAREW 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger (Pack of 10)
Asin: B0B4W96QTR | Model: HR-RELAY-5V | PartNumber: HR-RELAY-5V | Ean: 0762917148861 | UPC: 762917148861
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Insulation Design: The Relay Board Is Insulated With A Patch Optocoupler, And The Insulation Circuit Prevents The Relay Switching Current From Damaging The E/A Port..
Wide Range Of Applications: Suitable For All Kinds Of Single-Chip Microcomputers, And Can Be Widely Used In Various Power Control Occasions..
High Quality: The Module Adopts Normally Open Interface, High Quality Relay, The Maximum Load Of The Relay Module: Ac 250V/10A, Dc 30V/10A..
With Indicator Light: With Power Supply And Working Dual Indicator Lights. Power Indicator (Green), Relay Status Indicator (Red).
Features
- Convenience: The relay board is designed with 1 interface, humanized design, input and output terminals, and convenient wiring.
- With indicator light: with power supply and working dual indicator lights. Power indicator (green), relay status indicator (red)
- Insulation design: The relay board is insulated with a patch optocoupler, and the insulation circuit prevents the relay switching current from damaging the E/A port.
- High quality: The module adopts normally open interface, high quality relay, the maximum load of the relay module: AC 250V/10A, DC 30V/10A.
- Wide range of applications: suitable for all kinds of single-chip microcomputers, and can be widely used in various power control occasions.
- See more on Amazon...
Brand: HUAREW | Manufacturer: HUAREW
See On Amazon Similar To HUAREW 5V One Channel Relay
#1
KeeYees 5pcs 1 Channel 5V Relay Module Board Shield KY-019 LED Indicator for Arduino + 3pcs 20CM 10Pin Female Male Jumper Wires
Asin: B07L6J6FHH | Model: KYES504-KY019-5 | PartNumber: KYES504-KY019-5 | Ean: 0705883356380 | UPC: 705883356380
No Need To Buy The Jumper Wires Extra, This Set Contains 20Cm 10Pin Female To Female, Female To Male, Male To Male Dupont Jumper Wires, With Which You Can Easier To Complete The Project..
This Relay Can Be Used Not Only As A Microcontroller Development Board Module, But Also As A Home Appliance Controller..
Features
- The relay can directly control a variety of equipment and loads, which meets international safety standards, and also has power and relay indicators.
- This relay can be used not only as a microcontroller development board module, but also as a home appliance controller.
- No need to buy the Jumper Wires extra, this set contains 20cm 10Pin female to female, female to male, male to male Dupont Jumper Wires, with which you can easier to complete the project.
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
See On Amazon #2
HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger
Asin: B00LW15A4W | Model: 3-01-0340 | PartNumber: 3-01-0340 | Ean: 0702082655948 | UPC: 702082655948
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move..
The Module Can Be Set By Jumper High Or Low Trigger..
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient..
Using Smd Optocoupler Isolation, Strong Driving Capability, Stable Performance; Trigger Current 5Ma..
Features
- The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
- Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
- Fault-tolerant design, even if the control line is broken, the relay will not move.
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
- The Module can be set by jumper high or low trigger.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #3
EPAuto 30/40 AMP Relay Harness Spdt 12V, 5-PIN SPDT Bosch Style - 5 Pack
Asin: B017VDI0GY | Model: AE-001-1 | PartNumber: AE-001-1 | Ean: 0690443852320 | UPC: 690443852320
Package Include: 5 Relays + 5 Relay Sockets With Wires..
Safety Ul Flame Retardant 9" Wires For The Main Contact..
Heavy-Duty Impact Molded Relay Socket With 5 Wires。White (Common), Black (Normally Closed), And Yellow (Normally Open)..
Features
- 40A/30A high switching capability.
- Heavy-duty impact molded relay socket with 5 WIRES White (common), Black (normally closed), and Yellow (normally open).
- Package Include: 5 relays + 5 relay sockets with wires.
- Safety UL Flame retardant 9 wires for the main contact.
- See more on Amazon...
Brand: EPAuto | Manufacturer: EPAuto
Dimensions: 3.61 x 5.63 x 1.78 Inches | Weight: 0.89 pounds
See On Amazon #4
Teyleten Robot DC 1 Channel Optocoupler 3V/3.3V Relay High Level Driver Module Isolated Drive Control Board 3V/3.3V Relay Module for Arduino (Pack of 5)
Asin: B07XGZSYJV | Model: RK-S1B4-G97L | PartNumber: RK-S1B4-G97L | Ean: 0724545020568 | UPC: 724545020568
Optocoupler Isolator:3V/3.3V Power Relay Module Supports Photocoupler Isolation Control..
30Vdc 250Vac Load:The Power Switch Is Compatible With 10A 250Vac And 10A 30Vdc Load..
Features
- Original Songle Relay
- 30VDC 250VAC Load The power switch is compatible with 10A 250VAC and 10A 30VDC load.
- Optocoupler Isolator:3V/3.3V power relay module supports photocoupler isolation control.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.79 x 2.76 x 0.67 inches | Weight: 0.00 Pounds
Warranty: no
See On Amazon #5
AEDIKO 4pcs DC 5V Relay Module 1 Channel Relay Switch Relay Board with Optocoupler Isolation Support High or Low Level Trigger
Asin: B095YD3732 | Ean: 0701715480582 | UPC: 701715480582
Optocoupler Isolation:1 Channel Relay Board Use Optocoupler Isolation That Has Strong Driving Ability And Stable Performance ,The Isolation Circuit Prevent Damages To I / O Port By Relay Switch Current.
Wide Application: Dc 5V Relay Module Works Well With Arm /Pic /Avr /Mcu/Raspberry/Cnc Machine/ Ps4 Etc..
Jumper Design: The Relay Module Has A Jumper That You Can Set Rather The Unit State Changes With High Or Low Signal. Has Screw Terminals For Relay (Nc,C,No) And For Input; Coil +, Coil - And Trigger..
Fault-Tolerant Design: Fault Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Operate;All Interfaces Of Relay Can Be Wired Out Through The Terminals Directly,Normally Open And Normally Closed.
Features
- 5V Relay Module: Working Voltage: DC 5V; Maximum Load: AC 250V/10A, DC 30V/10A; Trigger Current of Opto-Isolator: 5mA
- Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate;All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed
- Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current
- Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input; Coil +, Coil - and Trigger.
- Wide Application: DC 5V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc.
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
Dimensions: 0.72 x 1.90 x 1.02 Inches
See On Amazon #6
HiLetgo 12V 1 Channel Relay Module with Optocoupler Isolation Support High or Low Level Trigger
Asin: B00LW15D1M | Model: 3-01-0341 | PartNumber: 3-01-0341 | Ean: 0702082655955 | UPC: 702082655955
Module Can Be Set By Jumper High Or Low Trigger.
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient.
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move.
Using Optocoupler Chip Isolation, Strong Drive Capability, Stable Performance; Trigger Current 5Ma.
Features
- Module uses genuine high quality relay, normally open interface maximum load: AC 250V / 10A, DC 30V / 10A
- Using optocoupler chip isolation, strong drive capability, stable performance; trigger current 5mA
- Module can be set by jumper high or low trigger
- Fault-tolerant design, even if the control line is broken, the relay will not move
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #7
SunFounder 2 Channel DC 5V Relay Module with Optocoupler Low Level Trigger Expansion Board Compatible with Arduino R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi
Asin: B00E0NTPP4 | Model: 8541582329 | PartNumber: 8541582329 | Ean: 0520141421293 | UPC: 520141421293
Standard Interface That Can Be Controlled Directly By Microcontroller (Compatible With Arduino ,Raspberry Pi, 8051, Avr, Pic, Dsp, Arm, Arm, Msp430, Ttl Logic).
Size: 50.5Mm(L) X 38.5Mm(W) X 18.5Mm(H)(1.99Inch X 1.54Inch X 0.73Inch).
Indication Led's For Relay Output Status.
Equiped With High-Current Relay, Ac250v 10A ; Dc30v 10A.
Features
- 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equiped with high-current relay, AC250V 10A ; DC30V 10A
- Standard interface that can be controlled directly by microcontroller (compatible with Arduino ,Raspberry Pi, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- Indication LED's for Relay output status
- Size: 50.5mm(L) x 38.5mm(W) x 18.5mm(H)(1.99inch x 1.54inch x 0.73inch)
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 0.80 x 2.70 x 2.50 inches
See On Amazon #8
5v Relay Module 1 Channel Relay Board for Raspberry Pi with Opto-Isolated High or Low Level Trigger 5v 1 Channel Relay Switch for Arduino
Asin: B09G6H7JDT | Ean: 0734914033952 | UPC: 734914033952
【Adopted Smd Optocoupler Isolation& Jumper Set】- The Isolation Circuit Prevent Damages To I / O Port By Relay Switch Current.The Module Has A Jumper So You Can Set Rather The Unit State Changes With High Or Low Signal. Has Screw Terminals For Relay (Nc,C,No) And For Input; Coil +, Coil - And Trigger..
【Humanization Design On Interfaces】- All Interfaces Can Be Directly Wired Out Through The Terminals.Fault-Tolerant Design;Fault-Tolerant Design,Even If The Control Line Is Broken, The Relay Will Not Operate..
【Wide Application】-These 5V Relay Board Works Well With Arm /Pic /Avr /Mcu/Raspberry/Cnc Machine/ Ps4 Etc..
【Main Specification】- Peak Load Of No Connector: Ac125~250V/10A, Dc28~30V/10A; Trigger Current: 5Ma;The Module Operating Voltage:12V; 4Pcs * 3.1 Mm Fixed Bolt Hole..
Features
- 5V 1 Channel Relay Module - This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller.
- Main Specification - Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A; Trigger Current: 5mA;The Module Operating Voltage:12V; 4pcs * 3.1 mm Fixed Bolt Hole.
- Adopted SMD Optocoupler Isolation& jumper Set - The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input; Coil +, coil - and trigger.
- Wide Application -These 5v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc.
- Humanization Design On Interfaces - All interfaces can be directly wired out through the terminals.Fault-tolerant design;fault-tolerant design,even if the control line is broken, the relay will not operate.
- See more on Amazon...
Brand: AZKO | Manufacturer: AZKO
Dimensions: 0.10 x 0.10 x 0.10 Inches
See On Amazon #9
ELEGOO 4 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 2560 DSP ARM PIC AVR STM32
Asin: B09ZQS2JRD
Working Status Indicator Lights Are Conducive To The Safe Use.
Widely Used For All Mcu Control, Industrial Sector, Plc Control, Smart Home Control. For A Complete Data Sheet For This Relay Board, Please Download It From: Http://Dwz.Win/Uhw.
4-Channel Relay Interface Board, Which Can Be Controlled Directly By A Wide Range Of Microcontrollers Such As Arduino, Avr, Pic, Arm, Plc, Etc. It Is Also Able To Control Various Appliances And Other Equipments With Large Current..
Standard Interface Can Be Directly Connected With Microcontrollers..
Features
- This relay module is 5V active low. Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Working status indicator lights are conducive to the safe use
- 4-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other equipments with large current.
- Widely used for all MCU control, industrial sector, PLC control, smart home control. For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #10
Tolako 5v Relay Module 5V Indicator Light LED 1 Channel Relay Module for Arduino ARM PIC AVR MCU
Asin: B00VRUAHLE | Model: BJ-DT0Y-001 | PartNumber: BJ-DT0Y-001 | Ean: 5175501214456
Control Dc Or Ac Signals Can Control The 220V Ac Load.
Useful To Control A Motor, A Led Strip, Or Any Other Module. How To Use It: Just Connect A Digital Output Of Your Board To Your Relay Module, And You Can Control A Power-Demanding Appliance With The Digital Signal.
There Is A Normally Open And Open Normally Closed Contact.
5V - 12 V Control Signal Of The Ttl.
Features
- Microcontroller development board can be used as modules, can be used as appliance control
- 5V - 12 V control signal of the TTL
- Control DC or AC signals can control the 220V AC Load
- There is a normally open and open normally closed contact
- Useful to control a motor, a led strip, or any other module. How to use it: Just connect a digital output of your board to your relay module, and you can control a power-demanding appliance with the digital signal
- See more on Amazon...
Brand: TOLAKO | Manufacturer: Tolako
See On Amazon
Looking For Something Else?
Search