Coliao 5pcs CR10 Bi-Metal Heatbreak, Upgrade Smooth All Metal Bimetal Copper Titanium Heatbreak High Temperature Throat for Creality 3D Printer CR10 Ender 3 V2 Ender3 pro Ender 5 CS3 S4 S5 Hotend
Asin: B0B53MDDVK | Model: Coliao-CR10 Bimetal Heatbreak | PartNumber: Coliao-CR10 Bimetal Heatbreak | Ean: 0701715518254 | UPC: 701715518254
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Plated Copper】The Part Connecting The Heat Sink Is Made Of Copper Alloy, Which With High Heat Conduction, Could Make Filament Cool Down Rapidly. The Part Connecting The Nozzle Is Made Of Titanium Alloy, Which Has Low Heat Conduction. Two Components With Different Thermal Conductivity Improve Heat Dissipation Efficiency..
【Widely Compatible】 The Total Length Is 27.5Mm With M6 Screw Thread, Suitable For Creality 3D Printer Upgrade Cr10 S4 S5 Ender 3 V2 Ender3 Pro Ender 5 Cs3 Hotend..
【For 1.75Mm Filament】The Inner Hole Finish Is 0.3 And The Torque Is More Than 10Kg, Could Print 1.75Mm Filament Fast And Safely..
【Upgrade Smooth Bimetal Titanium】The Inner Wall Of The Heatbreak Throat Is Smooth And Flat Without Any Burrs, Could Be Seamlessly Connected With Nozzle, No Risk Of Filament Leakage. (Notice: Please Tighten The Throat Before Tightening The Nozzle, And Tighten The Nozzle Again After Heating To 280℃, Be Careful Of Burns.).
Features
- Bi-Metal Heatbreak Made of high quality titanium alloy + plated copper, real bimetal material, high temperature resistance, has two components with different thermal conductivity.
- Upgrade Smooth BiMetal Titanium The inner wall of the heatbreak throat is smooth and flat without any burrs, could be seamlessly connected with nozzle, no risk of filament leakage. (Notice: please tighten the throat before tightening the nozzle, and tighten the nozzle again after heating to 280 , be careful of burns.)
- Plated Copper The part connecting the heat sink is made of copper alloy, which with high heat conduction, could make filament cool down rapidly. The part connecting the nozzle is made of titanium alloy, which has low heat conduction. Two components with different thermal conductivity improve heat dissipation efficiency.
- for 1.75mm Filament The inner hole finish is 0.3 and the torque is more than 10kg, could print 1.75mm filament fast and safely.
- Widely Compatible The total length is 27.5mm with M6 screw thread, suitable for creality 3d printer upgrade cr10 s4 s5 ender 3 v2 ender3 pro ender 5 cs3 hotend.
- See more on Amazon...
Brand: Coliao | Manufacturer: Coliao
See On Amazon Similar To Coliao 5pcs CR10 BiMetal Heatbreak
#1
POLISI3D Improved Nano Coated Ender 3 V2 Bimetallic Heat Break CR10 Bimetal Heatbreak Compatible with Creality Ender3 pro/Ender 5 Pro Plus / CR10 V2 V3 S4 S5, Neptune 3 Pro / 4 Pro 3D Printer Upgrade
Asin: B0C5VSK1V8 | Model: DLC CR10 heatbreak | PartNumber: DLC CR10 heatbreak
This Heatbtreak Is Made From Two Components, Copper And Titanium Tc4. Titanium Tc4 Reduces Heat Upward Conduction At The Heating Position, And Copper For Heat Dissipation To Accelerate Heat Conduction..
Compatible With Creality Ender 3 / Ender 3 Pro/Ender 3 V2 / Ender 5 /Ender 5 Pro / Ender 5 Plus , Cr10 / Cr10 V2 / V3 /S4 /S5 / Cr10s 3D Printers And Neptune 3 /3 Pro /4 /4 Pro 3D Printer, (But Not For Cr10s Pro, Please Know Before Ordering) ..
The Inner Wall Of The Titanium Is Very Smooth Plus The Dlc Nano Coating So That The Filament Can Pass Through Very Smoothly And Stop Clogging..
It Is Named "Bi-Metal Heatbreak" It Has Two Components With Different Thermal Conductivity. It Is Composed Of 2 Parts. We Use A Special Process To Hold Them Firmly Together. You Don't Need To Worry About It Being Damaged..
Features
- This Heatbreak is improved with special Nano Coating called DLC, DLC Nano Coating not only has excellent wear resistance, but also has a very low friction coefficient and excellent corrosion resistance, with a generally smooth surface,better for filament feeding
- It is named Bi-Metal Heatbreak It has two components with different thermal conductivity. It is composed of 2 parts. We use a special process to hold them firmly together. You don't need to worry about it being damaged.
- This Heatbtreak is made from two components, Copper and Titanium TC4. Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction.
- The inner wall of the titanium is very smooth Plus the DLC nano coating so that the filament can pass through very smoothly and stop clogging.
- Compatible with Creality Ender 3 / Ender 3 pro/Ender 3 V2 / Ender 5 /Ender 5 Pro / Ender 5 Plus , CR10 / CR10 V2 / V3 /S4 /S5 / CR10S 3D Printers and Neptune 3 /3 pro /4 /4 pro 3D printer, (But NOT for CR10S PRO, please know before ordering) .
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
Dimensions: 1.08 x 0.28 x 0.28 inches | Weight: 0.01 Pounds
See On Amazon #2
POLISI3D All Metal Bimetal Heatbreak Copper Titanium TC4 Throat High Temperature for Creality 3D Printer CR10 V3 S4 S5 Ender 3 V2 Ender3 pro Ender 5 CS3 Hotend Upgrade
Asin: B0971FNCM4 | Model: Bimetal upgrade heatbreak for Ender | PartNumber: Bimetal upgrade heatbreak for Ender
The Inner Wall Of The Titanium Is Very Smooth So That The Filament Can Pass Through And Reduce Clogging..
The Total Length Is 27.5Mm, Compatible With Creality Printer Upgrade Cr10 V3 S4 S5 Ender 3 V2 Ender3 Pro Ender 5 Cs3 Hotend.
This Heatbtreak Is Made From Two Components, Copper And Titanium Tc4. Titanium Tc4 Reduces Heat Upward Conduction At The Heating Position, And Copper For Heat Dissipation To Accelerate Heat Conduction..
Features
- It is named "Bi-Metal Heatbreak" It has two components with different thermal conductivity. It is composed of 2 parts. We use a special process to hold them firmly together. You don't need to worry about it being damaged.
- This Heatbtreak is made from two components, Copper and Titanium TC4. Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction.
- The inner wall of the titanium is very smooth so that the filament can pass through and reduce clogging.
- The total length is 27.5mm, Compatible with Creality Printer Upgrade CR10 V3 S4 S5 Ender 3 V2 Ender3 pro Ender 5 CS3 Hotend
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
Weight: 0.07 Pounds
See On Amazon #3
DIANN 4pcs All Metal Bimetal Heatbreak Copper Titanium TC4 Throat High Temperature for Creality 3D Printer CR10 Hotend
Asin: B0B6P6P83S | Model: DI09528 | PartNumber: DI09528 | Ean: 0701715526891 | UPC: 701715526891
Bimetal Material Advantage:The All Metal Heatbreak Is Made Of Titanium Alloy And Copper .Titanium Alloy Is Used To Reduce Heat Conduction And Gold-Plated Copper Is Used To Accelerate Heat Conduction.
Application:Total Length Of Heatbreak Is 27.5Mm With M6 Screw Thread,Suitable For Creality 3D Printer Upgrade Cr10 S4 S5 Ender 3 V2 Ender3 Pro Ender 5 Cs3 Hotends.
Easy To Install: This Heatbreak Throat Cut Is Smooth And Flat Without Any Burrs,Could Be Seamlessly Connected With Nozzle, No Risk Of Filament Leakage,Very Convenient To Install.
1.75Mm Filament:The Inner Hole Finish Is 0.3 And The Torque Is More Than 10Kg, Could Print 1.75Mm Filament Fast And Safely.
Features
- High Temperature Resistance:This 3D Printer Throat Tube is Made of All-Metal Material, Precision-Machined, High Temperature Resistance Up to 420
- 1.75mm Filament:The Inner Hole Finish is 0.3 and the Torque is More Than 10kg, Could Print 1.75mm Filament Fast and Safely
- Bimetal Material Advantage:The All Metal Heatbreak is Made of Titanium Alloy and Copper .Titanium Alloy is Used to Reduce Heat Conduction and Gold-Plated Copper is Used to Accelerate Heat Conduction
- Easy to Install: This Heatbreak Throat Cut is Smooth and Flat Without Any Burrs,Could Be Seamlessly Connected With Nozzle, No Risk of Filament Leakage,Very Convenient to Install
- Application:Total Length of Heatbreak is 27.5mm with M6 Screw Thread,Suitable for Creality 3D Printer Upgrade CR10 S4 S5 Ender 3 V2 Ender3 PRO Ender 5 CS3 Hotends
- See more on Amazon...
Brand: DIANN | Manufacturer: DIANN
See On Amazon #4
2pcs All Metal Ender 3 Titanium Heat Break Thermal Barrel Tube Heatbreak Upgrade for Creality 3D Printer CR10,S4 S5, CR10S, Ender3 V2, Ender 3 pro, CS3 Hotend use (Upgrade TC4 All Metal Version)
Asin: B08TCD4M1S | Model: cr10 Heatbreak | PartNumber: cr10 Heatbreak | Ean: 0791548327291 | UPC: 791548327291
There Is Od7mm Sidewall Between The Neck And Threaded Part, Which Can Fix The Heatbreak And Nozzle More Stable; Sidewall With Two Cutout Is Convenient For You To Use A 6Mm Wrentch To Screw The Heatbreak Out From The Heater Block..
This Is All Metal Type, You Can Use It To Print Very High Temperature Printing..
Used For Orginal Creality 3D Printer Cr10,S4 S5, Cr10s, Ender 3 Series, Ender-3 Pro, Cs3 Hotend Use; If You Wanna Use This Heatbreak To Other Printers, Please Check Our Drawings Before Ordering..
These Heatbreaks Is Made From Titanium Alloy Tc4 To Provide Excellent Thermal Isolation Between Heater And Cooling Block. Titanium Is Extremely Strong Material And Offers Almost 3X Lower Thermal Conductivity Than Stainless Steel, Creating More Defined Meltzone..
Features
- This Heatsink with ID2.0mm Neck is to solve the heat-creep issues. It would be better if you can apply some thermal paste to properly fit the heatbreak into the CR10 orginal heatsink. Please Make sure that there is no gap between the heatsink and the heat breaker
- These heatbreaks is made from Titanium Alloy TC4 to provide excellent thermal isolation between heater and cooling block. Titanium is extremely strong material and offers almost 3x lower thermal conductivity than stainless steel, creating more defined meltzone.
- There is OD7mm Sidewall between the neck and threaded part, which can fix the heatbreak and nozzle more stable; Sidewall with two cutout is convenient for you to use a 6mm wrentch to screw the heatbreak out from the heater block.
- Used for orginal Creality 3D Printer CR10,S4 S5, CR10S, Ender 3 Series, ender-3 pro, CS3 Hotend use; If you wanna use this heatbreak to other printers, please check our drawings before ordering.
- This is All metal type, you can use it to print very high temperature printing.
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
See On Amazon #5
ALMOCN 4pcs Smooth Heatbreak Upgrade Titanium and Copper Bimetal Throat Nozzle for Ender 3 V2 Ender 3 Pro CR10 3D Printer Hotend
Asin: B0B62L34LB | Ean: 0701715475816 | UPC: 701715475816
Wide Application: The Titanium Alloy And Copper Heatbreak Is Compatible With Ender 3 V2, Ender 3 Pro, Ender 3 Cr10 Series 3D Printers, The Thread Size Is M6.
All Metal Smooth Heatbreak Upgrade Titanium And Copper Bimetal Throat Nozzle For Ender 3 V2 Ender 3 Pro Cr10 3D Printer Hotend.
4Pcs All Metal Smooth Heatbreak Titanium Alloy And Copper Heatbreak Throat.
Bi-Metal Material Heatbreak: The Ender 3 Heat Break Is Made Of Tc4 Titanium Alloy And Copper .Titanium Alloy Is Used To Reduce Heat Conduction Upward From The Heating Block, And Gold-Plated Copper Is Used To Dissipate Heat To Accelerate Heat Conduction.
Features
- High Temperature Resistance: The all metal heat break works well with high-temp filaments. There is no Teflon to wear or burn,high temperature resistance up to 420
- Bi-metal Material Heatbreak: The Ender 3 heat break is made of TC4 Titanium Alloy and Copper .Titanium alloy is used to reduce heat conduction upward from the heating block, and gold-plated copper is used to dissipate heat to accelerate heat conduction
- Wide Application: The titanium alloy and copper heatbreak is compatible with Ender 3 V2, Ender 3 Pro, Ender 3 CR10 series 3D printers, the thread size is M6
- 4pcs All Metal Smooth Heatbreak Titanium Alloy and Copper Heatbreak Throat
- All Metal Smooth Heatbreak Upgrade Titanium and Copper Bimetal Throat Nozzle for Ender 3 V2 Ender 3 Pro CR10 3D Printer Hotend
- See more on Amazon...
Brand: ALMOCN | Manufacturer: ALMOCN
See On Amazon #6
Haldis 3D CR10 Bi-Metal Heatbreak, Upgrade Smooth BiMetal Titanium + Copper Heatbreak for CR10 Ender 3 V2 PRO Ender 5
Asin: B095HNCBDB | Model: CR10HEAT20 | PartNumber: CR10HEAT20 | Ean: 0728224781955 | UPC: 728224781955
【Plated Copper Heatsink】:Two Components With Different Thermal Conductivity.Improve Heat Dissipation Efficiency.
【Cr10 Heat Break】:This Heatbreak Is Used For The 1.75Mm Cr10 Hotend..
【Package Included】:Comes With 2 Pieces Bi-Metal Cr10 Heatbreak For 1.75Mm Filament.
【Premium Performance】:Ordinary Bimetal Heatbreak Torque Is Less Than 5Kg, The Inner Hole Has A Poor Finish, The Connection Part Is Fixed By Glue, Vwhich Is Very Easy To Fall Off And Affect Printing. Our Product Is Processed By Precision Swiss-Type 5-Axis Machine And Made By Precision Pressing Mechanism. The Inner Hole Finish Is 0.3 And The Torque Is More Than 10Kg..
Features
- BI-METAL HEATBREAK :High quality titanium alloy + plated copper,real bimetal material ,combined with 2 components
- PREMIUM PERFORMANCE :Ordinary bimetal heatbreak torque is less than 5kg, the inner hole has a poor finish, the connection part is fixed by glue, vwhich is very easy to fall off and affect printing. Our product is processed by precision Swiss-type 5-axis machine and made by precision pressing mechanism. The inner hole finish is 0.3 and the torque is more than 10kg.
- PLATED COPPER HEATSINK :two components with different thermal conductivity.improve heat dissipation efficiency
- PACKAGE INCLUDED :Comes with 2 pieces Bi-metal CR10 heatbreak for 1.75mm filament
- CR10 HEAT BREAK :This heatbreak is used for the 1.75mm CR10 Hotend.
- See more on Amazon...
Manufacturer: Haldis 3D
See On Amazon #7
Slice Engineering Copperhead C-Pro Max Bimetallic Heat Break for Creality CR10S Pro / CR10S Pro v2 / CR10 Max Printers - Stop Clogging - Improve Resolution - Eliminate Heat Creep (P-CHB-RE-0090-CPM)
Asin: B09RX4J311 | Model: P-CHB-RE-0090-CPM | PartNumber: P-CHB-RE-0090-CPM | Ean: 0850005423720 | UPC: 850005423720
✔️ [Eliminates Heat Creep] – Improve Resolution, Stop Clogging, And Prevent Failed Prints From Happening By Using This Bimetallic Heat Break That Conducts 60% Less Heat Than A Standard Threaded Heat Break!.
✔️ [Slice’S Guarantee] - Slice Engineering Is A Usa Based Company. All Of Our Products Are Tested By Our In-House Engineering Team, Carry A Limited Lifetime Warranty Against Manufacturing Defects, And Are Supported By Our Knowledgeable Engineering Staff. Be Confident That We Stand By Our Products!.
Disclaimer: Creality And Ender Are Registered Trademarks Of Shenzhen Creality 3D Technology Co, Ltd. Slice Engineering, Llc Is Not Affiliated With Nor Endorsed By Shenzhen Creality 3D Technology Co, Ltd..
✔️ [450°C Temperature Rating] – With A Temperature Rating This High, Our Copperhead Heatbreak Upgrade Will Allow You To Print Virtually Any Available Printable Thermoplastic (Asa, Pc, Peek, Pei, Etc.)!.
✔️ [Plug And Play] – Simply Uninstall Your Stock Heat Break, Install Our Copperhead Heat Break, And Start Printing Away!.
Features
- [BEST CREALITY UPGRADE] - This bimetallic heat break upgrade was specifically designed to fit the following printers: Creality CR-10S Pro | CR-10S Pro v2 | CR-10 Max
- [PLUG AND PLAY] Simply uninstall your stock heat break, install our Copperhead Heat Break, and start printing away!
- [ELIMINATES HEAT CREEP] Improve resolution, stop clogging, and prevent failed prints from happening by using this bimetallic heat break that conducts 60% less heat than a standard threaded heat break!
- [450 C TEMPERATURE RATING] With a temperature rating this high, our Copperhead Heatbreak Upgrade will allow you to print virtually any available printable thermoplastic (ASA, PC, PEEK, PEI, etc.)!
- [Slice s Guarantee] - Slice Engineering is a USA based company. All of our products are tested by our in-house engineering team, carry a limited lifetime warranty against manufacturing defects, and are supported by our knowledgeable engineering staff. Be confident that we stand by our products!
- Disclaimer: Creality and Ender are registered trademarks of Shenzhen Creality 3D Technology Co, Ltd. Slice Engineering, LLC is not affiliated with nor endorsed by Shenzhen Creality 3D Technology Co, Ltd.
- See more on Amazon...
Brand: Slice Engineering | Manufacturer: Slice Engineering
Dimensions: 0.98 x 3.74 x 2.01 inches
Warranty: Lifetime warranty against manufacturing defects
See On Amazon #8
Newwish Ender 3 CR-10 Bi-Metal Heatbreak,Ender 3 V2 Upgrade All Metal BiMetal Heatbreak for Ender 3/V2/Pro/Ender 5/Plus/CR10/10S/S4/S5/CR10/V2/V3/Neptune 3 Pro/Plus/Max/Neptune 4/4 Pro Hotend.(1PC)
Asin: B0D18F2F9N | Ean: 0747086754358 | UPC: 747086754358
Prevents Clogs And Leaks: Compared To Competitive Products, The Inner Wall Of The Tube Is Smoother And Burr-Free. (Reduces The Chance Of Filament Clogging). The Interface Is Smoother And More Precise.(It Can Effectively Prevent Filament Leakage)..
Prevent Thermal Creep: This Structure Can Reduce The Temperature Fluctuation Of The Hotend And Make The Hotend More Stable And Reliable So As To Reduce The Occurrence Of Thermal Creep To Improve The Printing Quality And Can Effectively Prevent The Clogging Problem Caused By Thermal Creep..
Improve Printing Efficiency: 450℃-Rated Bi-Metal Heatbreak Melts Filament Faster And Conducts 60% Less Heat Across The Break Zone Than Standard Heatbreak,Which Reduce Heat Loss, Greatly Improve Printing Efficiency..
Heat Insulation Good: Titanium Alloy Reduces Heat Upward Conduction At The Heating Position, And Copper For Heat Dissipation To Accelerate Heat Conduction.High Overall Heat Insulation Performance,High Temperature Resistance,Wear Resistance, High Hardness And Long Service Life..
Features
- Bi-Metal Structure: This is a branch design of the bimetal HEATBREAK. The front end of the Ender 3 CR-10 Bi-Metal Heatbreak is made of high-quality GRADE5 titanium alloy and the rear end is made of copper alloy material. We use a special process to hold them firmly together. You don't need to worry about it being damaged.
- Heat Insulation Good: Titanium alloy reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction.High overall heat insulation performance,High temperature resistance,Wear resistance, high hardness and long service life.
- Prevents Clogs and Leaks: Compared to competitive products, the inner wall of the tube is smoother and burr-free. (reduces the chance of filament clogging). The interface is smoother and more precise.(it can effectively prevent filament leakage).
- Improve Printing Efficiency: 450 -rated Bi-Metal Heatbreak melts filament faster and conducts 60% less heat across the Break Zone than standard heatbreak,which reduce heat loss, greatly improve printing efficiency.
- Prevent Thermal Creep: This structure can reduce the temperature fluctuation of the hotend and make the hotend more stable And reliable so as to reduce the occurrence of thermal creep to improve the printing quality and can effectively prevent the clogging problem caused by thermal creep.
- See more on Amazon...
Brand: Newwish | Manufacturer: Newwish
See On Amazon #9
2Pcs Bimetal CR10 Titanium Alloy Heat Break Throat 1.75mm Copper Plating Tube 4.1mm Through for Ender 3 CR-10 Hotend 3D Printer
Asin: B09V6XWZJM | Model: ljpyyds69 | PartNumber: ljpyyds69 | Ean: 0746197842091 | UPC: 746197842091
Brand: POJECITY | Manufacturer: tongtuoljp069
See On Amazon
Looking For Something Else?
Search