uxcell 5pcs 28mm Carbon Steel Bearing Balls Precision Polished
Asin: B0B5PL9GHZ | Model: a22033000ux1012 | PartNumber: a22033000ux1012
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features - Wide Range Of Applications(Maintain Industrial Equipment Or Use For Family Diy Projects); Cost-Effective(Can Repair Existing Products).
Notice - Confirm The Ball Diameter Before Ordering..
Applications - Maintain Product That Uses Steel Balls, Such As Ball Bearings, Turntable, Drawer Slides, Casters, Door Locks; Diy Projects Like A Keychain, Or Adding Weight For Your Projects, Etc..
Material - Made Of Carbon Steel Which Lowers The Cost For Your Maintenance..
Features
- Size - 28mm Diameter Mirror Polished Precision Balls
- Material - Made of carbon steel which lowers the cost for your maintenance.
- Features - Wide range of applications(maintain industrial equipment or use for family DIY projects); Cost-effective(can repair existing products)
- Applications - Maintain product that uses steel balls, such as ball bearings, turntable, drawer slides, casters, door locks; DIY projects like a keychain, or adding weight for your projects, etc.
- Notice - Confirm the Ball Diameter before ordering.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 5pcs 28mm Carbon Steel
#1
uxcell M6x16mm Carbon Steel Step Hand Screw Flat Knurled Head Thumb Bolts 5pcs
Asin: B01M0VK4OD | Model: SYNCTEA047004 | PartNumber: SYNCTEA047004 | Ean: 0709874032284 | UPC: 709874032284
Thread Size: M6 X16mm/ 0.24" X 0.63" (D*L); Weight: 109G.
Thread Style: Fully Thread; Knurled Head Diameter: 20Mm/ 0.8".
Main Color: Silver Blue; Total Length: 28Mm/ 1.1".
Package Content: 5Pcs X Knurled Thumb Screw; Product Name: Knurled Thumb Screw.
Features
- Head Style: Round Knurled Head; Material: Carbon Steel
- Package Content: 5pcs x Knurled Thumb Screw; Product Name: Knurled Thumb Screw
- Thread Size: M6 x16mm/ 0.24 x 0.63 (D*L); Weight: 109g
- Main Color: Silver Blue; Total Length: 28mm/ 1.1
- Thread Style: Fully Thread; Knurled Head Diameter: 20mm/ 0.8
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell U-Bolts 5pcs 1.1"(28mm) Inner Width 54mm Length M8 304 Stainless Steel U-Bolt Fastener for 27mm Pipe Dia
Asin: B07HKF61TL | Model: a18081500ux0526 | PartNumber: a18081500ux0526
Thread: M8; Groove Width: 28Mm / 1.1"; Total Length:54Mm / 2.13".
Thread Length(Min): 26Mm / 1.02"; Package Content: 5Pcs X U-Bolts(Package Does Not Include Accessories.).
Fit For 27Mm Pipe Diameter; Pitch: 1.25Mm/ 0.05"; Rod Dia: 7Mm / 0.28";.
Material: 304 Stainless Steel U Bolt Is Anti-Rust And Corrosion-Resistant, With Strong Tensile Strength. Suitable For Outdoor, Wet Environment Use..
Features
- Application: U-bolt is used to fasten or attach locking components to pipes, wood, etc. It is suitable for the connection of boats, pipelines, trailers, and industrial steel structure conduits.
- Material: 304 stainless steel u bolt is anti-rust and corrosion-resistant, with strong tensile strength. Suitable for outdoor, wet environment use.
- Thread: M8; Groove Width: 28mm / 1.1; Total Length:54mm / 2.13
- Fit for 27mm Pipe Diameter; Pitch: 1.25mm/ 0.05; Rod Dia: 7mm / 0.28;
- Thread Length(Min): 26mm / 1.02; Package Content: 5pcs x U-Bolts(Package does not include accessories.)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 5.51 x 3.94 inches
See On Amazon #3
uxcell 10pcs Aluminum Heatsink Kit, 28x28x8mm Mini VRM Heatsink Cooler Heat Sink for Cooling 3D Printers, Stepper Motor, Stepper Driver
Asin: B00VG6WVA4 | Model: a14111400ux0167 | PartNumber: a14111400ux0167
Wide Applications: This Heat Sinks Can Be Applied For A Variety Of Cool Applications, Such As Led Power Memory Chip, 3D Printers, Stepper Motor, Stepper Driver, Computers, Vram, Vga, Ic Chips Etc..
Compact Size And Package: Small In Size, Light In Weight, Size: 28 X 28 X 8Mm/1.1" X 1.1" X 0.31" (L*W*H). Net Weight: 2.6Oz. Package Content: 10 X Heatsink.
Easy Installation: The Mini Heat Sink Is Easy To Install, Can Be Used With Other Devices To Cool Processors, Regulators, Etc..
Effective Cooling: Designed To Efficiently Reduce Electronic Devices And Other Components Temperature In Enclosed Environments, Preventing Overheating And Prolonging Lifespan.
Features
- Aluminum Heatsink: The vrm heatsink made of durable aluminum material for efficient heat dissipation
- Effective Cooling: Designed to efficiently reduce electronic devices and other components temperature in enclosed environments, preventing overheating and prolonging lifespan
- Wide Applications: This heat sinks can be applied for a variety of cool applications, such as LED power memory chip, 3D printers, stepper motor, stepper driver, computers, VRAM, VGA, IC chips etc.
- Easy Installation: The mini heat sink is easy to install, can be used with other devices to cool processors, regulators, etc.
- Compact Size and Package: Small in size, light in weight, size: 28 x 28 x 8mm/1.1 x 1.1 x 0.31 (L*W*H). Net Weight: 2.6oz. Package Content: 10 x Heatsink
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.80 x 4.90 x 3.50 inches | Weight: 0.10 pounds
See On Amazon #4
uxcell Revolving Handle Grip, 5Pcs M10x100mm(DXL) Threaded Handwheel Screw Knobs Crank Handle for Industry Lathe Milling Machine
Asin: B0BRCYWB6S | Model: a22090900ux0689 | PartNumber: a22090900ux0689
Purpose: Face Grinder, Molding And Polishing Machine, Precision Drilling-Milling, Turning Lathes, Boring, Tapping, Drill Press, Bench Lathes, Table Saw, Etc..
Please Pay Attention To The Measurement To Make Sure It Is Right For You Before Ordering..
Easy Install: You Can Use A Hex Screwdriver(Not Included) To Fasten Or Loosen It. Don't Worry About Loosening While Working, Which Will Bring Great Convenience To Your Life..
Material: The Rotary Handle Is Made Of Plastic, And The Bolts Are Made Of Carbon Steel, Bolts Surface Is Zinc Plated With A Comfortable Grip, Which Is Sturdy And Durable, Wear-Resistant, And Corrosion-Resistant..
Features
- Handle Diameter(Max): 28mm/1.1"; Handle Length: 100mm/3.94"; Thread Type: M10*1.5; Thread Length: 18mm/0.71"; Hex Side to Side Width: 6mm/0.24"; Package Content: 5Pcs x Revolving Handles Knob
- Material: The rotary handle is made of plastic, and the bolts are made of carbon steel, bolts surface is zinc plated with a comfortable grip, which is sturdy and durable, wear-resistant, and corrosion-resistant.
- Purpose: Face grinder, molding and polishing machine, precision drilling-milling, turning lathes, boring, tapping, drill press, bench lathes, table saw, etc.
- Easy Install: You can use a hex screwdriver(not included) to fasten or loosen it. Don't worry about loosening while working, which will bring great convenience to your life.
- Please pay attention to the measurement to make sure it is right for you before ordering.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell 5Pcs M12x1.75mm Hexagon Slotted Nut, Grade 8 Carbon Steel Hex Castle Nuts, Color Zinc
Asin: B0C14R7RPX
[Material] - Made Of Carbon Steel With A Color Zinc Finish, This Hex Slotted Nut Is Of High Hardness, Not Easy To Rust, Deform, Wear-Resistant And Anti-Corrosion.
[Usage] - Commonly Used In Industry To Secure Front Wheel Bearings Or Hubs To Main Shafts On Trucks. Suitable For Some Repair And Maintenance In The Mechanical Industry, Shops, Garages, Household Furniture Fasteners, Etc..
[Function] - The Slots Are For The Insertion Of A Cotter Pin To Secure The Nut When Used With A Drilled Shank Fastener. Fitting For A 4X28mm Cotter Pin.
[Size] - 0.71" (18Mm) Width Across Flat, 0.62" (15.8Mm) Height,0.43" (10.8Mm) Full Thread Height, Grade:8.
Features
- [Threaded] - Thread Size:M12; Thread Pitch:1.75mm/0.07"; Slot Width:4.25mm/0.17"
- [SIZE] - 0.71 (18mm) width across flat, 0.62 (15.8mm) height,0.43 (10.8mm) full thread height, Grade:8
- [Material] - Made of carbon steel with a color zinc finish, this hex slotted nut is of high hardness, not easy to rust, deform, wear-resistant and anti-corrosion
- [Function] - The slots are for the insertion of a cotter pin to secure the nut when used with a drilled shank fastener. Fitting for a 4x28mm cotter pin
- [Usage] - Commonly used in industry to secure front wheel bearings or hubs to main shafts on trucks. Suitable for some repair and maintenance in the mechanical industry, shops, garages, household furniture fasteners, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell Carbon Fiber Tube 30x28x500mm for RC Airplane Quadcopter Black Tube 3K Roll Wrapped Matt Surface
Asin: B0951YN32W | Model: a21012700ux0256 | PartNumber: a21012700ux0256
Smooth Surface: Made Of High Tensile Carbon Fiber, Matte Surface..
Note: Due To Manual Measurement, Most Carbon Fiber Tube Sizes Will Have A Little Error..
Application: Carbon Fiber Tube Widely Used In Racing Drones Arm, Rc Helicopter Wing Structural Support, Rc Airplanes,Rc Boat, Kite Spars, 3D Printer Bracket Clamp Rack Tube, Landing Leg Tube, Linear Bearings Tubes, Extended Tube, Quadcopter Support Tube, Etc..
Lightweight Strong Black Carbon Tube With Good Flat And Smooth Finish, Corrosion-Resistant, And Heat-Resisting..
Features
- Size and Shape: Rounded tube with 30mm/1.2'' outside diameter, 28mm/1.1'' inner diameter, 500mm/19.7'' overall length.
- Lightweight strong black carbon tube with good flat and smooth finish, corrosion-resistant, and heat-resisting.
- Smooth Surface: made of high tensile carbon fiber, matte surface.
- Application: Carbon fiber tube widely used in racing drones arm, RC helicopter wing structural support, RC airplanes,RC boat, kite spars, 3D printer bracket clamp rack tube, landing leg tube, linear bearings tubes, extended tube, quadcopter support tube, etc.
- Note: due to manual measurement, most carbon fiber tube sizes will have a little error.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell 6902-2RS Deep Groove Ball Bearings Z2 15mm X 28mm X 7mm Double Sealed Carbon Steel 5pcs
Asin: B08199PH7G | Model: a19082100ux1580 | PartNumber: a19082100ux1580
Made From Carbon Steel, Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 2300 Newtons And Dynamic Load Rating Of 4300 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
6902-2Rs Bearings Are Sealed On Both Sides To Keep Lubricant In.
Features
- 6902-2RS (I.D.=15mm, O.D.=28mm, Thickness=7mm)
- 6902-2RS bearings are Sealed on BOTH SIDES to keep lubricant in
- Made from Carbon Steel, durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 2300 newtons and dynamic load rating of 4300 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.17 pounds
See On Amazon #8
uxcell 5Pcs M12x1.75mm Hexagon Slotted Nut, Grade 10 Carbon Steel Hex Castle Nuts, Color Zinc
Asin: B0C14QSBV9
[Material] - Made Of Carbon Steel With A Color Zinc Finish, This Hex Slotted Nut Is Of High Hardness, Not Easy To Rust, Deform, Wear-Resistant And Anti-Corrosion.
[Usage] - Commonly Used In Industry To Secure Front Wheel Bearings Or Hubs To Main Shafts On Trucks. Suitable For Some Repair And Maintenance In The Mechanical Industry, Shops, Garages, Household Furniture Fasteners, Etc..
[Function] - The Slots Are For The Insertion Of A Cotter Pin To Secure The Nut When Used With A Drilled Shank Fastener. Fitting For A 4X28mm Cotter Pin.
[Size] - 0.71" (18Mm) Width Across Flat, 0.62" (15.8Mm) Height,0.43" (10.8Mm) Full Thread Height, Grade:10.
Features
- [Threaded] - Thread Size:M12; Thread Pitch:1.75mm/0.07"; Slot Width:4.25mm/0.17"
- [SIZE] - 0.71 (18mm) width across flat, 0.62 (15.8mm) height,0.43 (10.8mm) full thread height, Grade:10
- [Material] - Made of carbon steel with a color zinc finish, this hex slotted nut is of high hardness, not easy to rust, deform, wear-resistant and anti-corrosion
- [Function] - The slots are for the insertion of a cotter pin to secure the nut when used with a drilled shank fastener. Fitting for a 4x28mm cotter pin
- [Usage] - Commonly used in industry to secure front wheel bearings or hubs to main shafts on trucks. Suitable for some repair and maintenance in the mechanical industry, shops, garages, household furniture fasteners, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell Reduced Shank Drill Bit 28mm High Speed Steel HSS 4241 with 1/2 Inch Straight Shank
Asin: B07PGYXDKB | Model: a19010500ux0079 | PartNumber: a19010500ux0079
Polished Finish - Polished Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge..
Please Note: To Make Clean And Precise Holes, Water Is Required For Lubrication And Cooling When Drilling Metals, And The Feed Speed Should Be Controlled. Increased Use Of Water Lubrication Will Extend Drill Bit Life..
Wide Application - Drill Low And Medium Tensile Strength Materials, Such Aluminum, Iron, Copper, Brass And Metal. Reduced Shank Drill Bit Is Widely Suitable For Wood Processing. (Hardness Of The Material To Be Drilled Should Not Exceed 29Hrc.).
Reduced Shank - Expanding The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes..
Features
- High Speed Steel tool - 28mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance.
- Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
- Polished Finish - Polished treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge.
- Wide Application - Drill low and medium tensile strength materials, such aluminum, iron, copper, brass and metal. Reduced shank drill bit is widely suitable for wood processing. (Hardness of the material to be drilled should not exceed 29HRC.)
- Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals, and the feed speed should be controlled. Increased use of water lubrication will extend drill bit life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 6.89 x 1.38 inches | Weight: 0.00 pounds
See On Amazon #10
uxcell 6902ZZ Deep Groove Ball Bearings Z2 15mm X 28mm X 7mm Double Shielded Carbon Steel 5pcs
Asin: B081999V1S | Model: a19082100ux1553 | PartNumber: a19082100ux1553
Made From Carbon Steel, Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 2259 Newtons And Dynamic Load Rating Of 4321 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
6902-2Z Bearings Are Shielded On Both Sides To Keep Lubricant In.
Features
- 6902ZZ (I.D.=15mm, O.D.=28mm, Thickness=7mm)
- 6902-2Z bearings are Shielded on BOTH SIDES to keep lubricant in
- Made from Carbon Steel, durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 2259 newtons and dynamic load rating of 4321 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell M14x2mm Hexagon Slotted Nut, Grade 4.8 Carbon Steel Hex Castle Nuts, Black, 5Pcs
Asin: B0B1V6KWTT | Model: a22030900ux0089 | PartNumber: a22030900ux0089
[Material] - Made Of Carbon Steel With A Blackened Surface Finish, This Hex Slotted Nut Is Of High Hardness, Not Easy To Rust, Deform, Wear-Resistant And Anti-Corrosion.
[Usage] - Commonly Used In Industry To Secure Front Wheel Bearings Or Hubs To Main Shafts On Trucks. Suitable For Some Repair And Maintenance In The Mechanical Industry, Shops, Garages, Household Furniture Fasteners, Etc..
[Function] - The Slots Are For The Insertion Of A Cotter Pin To Secure The Nut When Used With A Drilled Shank Fastener. Fitting For A 4X28mm Cotter Pin.
[Size] - 0.87" (22Mm) Width Across Flat, 0.59" (15Mm) Height, 0.31" (8Mm) Full Thread Height, Grade: 4.8.
Features
- [Threaded] - Thread Size: M14; Thread Pitch: 2mm / 0.08"; Slot Width: 4mm / 0.16"
- [SIZE] - 0.87 (22mm) width across flat, 0.59 (15mm) height, 0.31 (8mm) full thread height, Grade: 4.8
- [Material] - Made of carbon steel with a blackened surface finish, this hex slotted nut is of high hardness, not easy to rust, deform, wear-resistant and anti-corrosion
- [Function] - The slots are for the insertion of a cotter pin to secure the nut when used with a drilled shank fastener. Fitting for a 4x28mm cotter pin
- [Usage] - Commonly used in industry to secure front wheel bearings or hubs to main shafts on trucks. Suitable for some repair and maintenance in the mechanical industry, shops, garages, household furniture fasteners, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell Cylindrical Abrasive Mounted Stone Polishing Bits 1/4" Shank 1.10" Diameter White Corundum Grinding Wheel Rotary Tool for Deburring Buffing 5pcs
Asin: B09XX34TZQ | Model: a22022500ux0215 | PartNumber: a22022500ux0215
[Material] - White Corundum Has A Higher Hardness Than Brown Corundum. The Particle Size Is Easily Broken, The Edges And Corners Are Sharp, Good Self-Sharpening, Strong Grinding Force, High Efficiency, And High-Temperature Resistance..
[Notice] - The New Corundum Grinding Bit Should Be Tried At A Low Speed Before Use. If There Is A Jumping Problem, Do Not Continue To Use It. Flying Chips May Be Generated During Use. Please Use Jigs, Non-Slip Finger Stall, And Wear Protective Glasses When Using This Corundum Grinding Bit..
[Applications] - Suitable For Grinding Of Hardened Steel, High Carbon Steel, General High-Speed Steel, Alloy Steel, Etc. Cutting Tools And Workpieces, Precision Grinding Of Measuring Tools And Instrument Parts, And Also Suitable For Form Grinding..
[Details] - Grinding Bit Material: White Corundum, Shape: Cylinder, Mesh: 80 Grit, Recommended Speed: 25-40M/S. The Cylindrical Shape Is Suitable For Surface And Edge Grinding..
Features
- [Size] - Shank Diameter: 1/4", Head Diameter: 28mm / 1.10 inch, Total Length: 51mm / 2.00 inch.
- [Details] - Grinding Bit Material: White Corundum, Shape: Cylinder, Mesh: 80 Grit, Recommended Speed: 25-40m/s. The cylindrical shape is suitable for surface and edge grinding.
- [Material] - White corundum has a higher hardness than brown corundum. The particle size is easily broken, the edges and corners are sharp, good self-sharpening, strong grinding force, high efficiency, and high-temperature resistance.
- [Applications] - Suitable for grinding of hardened steel, high carbon steel, general high-speed steel, alloy steel, etc. cutting tools and workpieces, precision grinding of measuring tools and instrument parts, and also suitable for form grinding.
- [Notice] - The new corundum grinding bit should be tried at a low speed before use. If there is a jumping problem, do not continue to use it. Flying chips may be generated during use. Please use jigs, non-slip finger stall, and wear protective glasses when using this corundum grinding bit.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell Finishing Nails Hand-Drive Carbon Steel 25mm/28mm/30mm/38mm Totally 250pcs
Asin: B095PKCD8M | Model: a21011500ux0129 | PartNumber: a21011500ux0129
Material: Made From Carbon Steel To Ensure Good Into Oak, Birch, Walnut, And Other Hardwoods. Polished Appearance, Galvanized Surface Treatment, High Strength, And Corrosion Resistance..
Application: Widely Used In Wood Products, Interior Decoration, And Our Lives. More Suitable For Indoor Use. Use A Power Tool Or A Hammer(Power Tool Be Better)..
Advantage: Finishing Type Nail That Has A Small Head, Almost No Trace, Which Protects The Integrity Of The Baseboard To A Large Extent..
Package Content: 80Pcs X 25Mm; 80Pcs X 28Mm; 45Pcs X 30Mm; 45Pcs X 38Mm Finishing Nails(4 Sizes Totally 250Pcs).
Features
- Rod Dia: 2mm / 0.08"(13 Gauge); Total Length: 25mm,28mm,30mm,38mm / 0.98", 1.1", 1.18", 1.5"
- Package Content: 80pcs x 25mm; 80pcs x 28mm; 45pcs x 30mm; 45pcs x 38mm Finishing Nails(4 Sizes totally 250pcs)
- Material: Made from carbon steel to ensure good into oak, birch, walnut, and other hardwoods. Polished appearance, galvanized surface treatment, high strength, and corrosion resistance.
- Advantage: Finishing type nail that has a small head, almost no trace, which protects the integrity of the baseboard to a large extent.
- Application: Widely used in wood products, interior decoration, and our lives. More suitable for indoor use. Use a power tool or a hammer(power tool be better).
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell Metal Shielded Deep Groove Radial Ball Bearing 6902Z 15x28x7mm 5pcs
Asin: B01DO2L00Y | Model: a15122800ux1010 | PartNumber: a15122800ux1010 | Ean: 0602451179498 | UPC: 602451179498
Width : 7Mm/0.28";Material : Metal.
Package Content : 5 X Deep Groove Ball Bearing.
Color : Silver Tone;Weight : 79G.
Inner Diameter : 15Mm/0.6";Outer Diameter : 28Mm/1.1".
Features
- Product Name : Deep Groove Ball Bearing;Bearing Model : 6902Z
- Inner Diameter : 15mm/0.6;Outer Diameter : 28mm/1.1
- Width : 7mm/0.28;Material : Metal
- Color : Silver Tone;Weight : 79g
- Package Content : 5 x Deep Groove Ball Bearing
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.17 pounds
See On Amazon #15
uxcell Roller Ball Bearings 8mm Bore 28mm OD 8mm Thick Double Sealed Chrome Steel Spherical Surface
Asin: B0C3Z1PXXT
Features - Single Row, Double Sealed, Outer Arc Shape.
Applications - Suitable For Industrial Equipment, Especially For Cnc Spinning Machines..
Capability - They Are Used To Accommodate Radial And Axial Loads In Both Directions..
Material - Rolling Balls Are Made Of Chrome Steel With Excellent Surface Quality, High Hardness, High Load Capacity, And Wear Resistance..
Features
- Size - Inner Diameter=8mm, Outer Diameter=28mm, Thickness=8mm
- Material - Rolling Balls are made of chrome steel with excellent surface quality, high hardness, high load capacity, and wear resistance.
- Features - Single row, double sealed, outer arc shape
- Capability - They are used to accommodate radial and axial loads in both directions.
- Applications - Suitable for industrial equipment, especially for CNC spinning machines.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell Finishing Nails Hand-Drive Carbon Steel Nail 25mm/28mm/30mm/35mm/38mm Length, Total 250pcs
Asin: B095PJ3LZL
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell Electronic Radiators Heatsink for MOS GPU IC Chip Black 28 x 28 x 6 mm 5pcs
Asin: B08HLZXMBB | Model: a19120300ux0984 | PartNumber: a19120300ux0984
[Note] This Heatsink Come Without Any Thermal Tape Or Adhesive Tape, We Recommend Using Some Glue (Here Is Not Included) To Stick..
[Material] Aluminum Alloy, Great Function For Heat Transfer..
[Feature] With Horizontal And Vertical Cooling Slots.It Only Take Seconds To Install, Easy To Install..
[Application] Great For Cooling Chips, Stepper Motor Driver Module And Other Small Electronics That Didn't Come With Any Cooling..
Features
- [PARAMETER] Overall Size: 28 x 28 x 6 mm / 1.1 x 1.1 x 0.24 inch (L*W*H); Color Black.
- [APPLICATION] Great for cooling chips, stepper motor driver module and other small electronics that didn't come with any cooling.
- [NOTE] This heatsink come without any thermal tape or adhesive tape, we recommend using some glue (here is not included) to stick.
- [FEATURE] With horizontal and vertical cooling slots.It only take seconds to install, easy to install.
- [MATERIAL] Aluminum alloy, great function for heat transfer.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell Carbon Steel GB117 30mm Length 4mm X 4.6mm Small End Diameter 1:50 Taper Pin 5Pcs
Asin: B0816N5WBK | Model: a19092300ux0265 | PartNumber: a19092300ux0265
* Taper : 1:50; Small End Diameter: 4Mm / 0.16-Inch; Large End Diameter: 4.6Mm / 0.18-Inch..
* Preferred For Parts Which Have To Be Taken Apart Frequently And When Absolute Alignment Is Required..
* Finish: Grinding(Hardening Heat Treatment); Standard: Gb117; Standard Tolerance..
* Taper Pin Has Diameter That Tapers Along The Length Of The Pin For Installing In Tapered Holes..
Features
- * These taper pins are made of Carbon Steel. Its surface is very smooth.
- * Taper pin has diameter that tapers along the length of the pin for installing in tapered holes.
- * Taper : 1:50; Small End Diameter: 4mm / 0.16-inch; Large End Diameter: 4.6mm / 0.18-inch.
- * Finish: Grinding(Hardening Heat Treatment); Standard: GB117; Standard tolerance.
- * Preferred for parts which have to be taken apart frequently and when absolute alignment is required.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 50 Pcs 5mm x 28mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone
Asin: B07S6NLNNK | Model: a19041000ux0052 | PartNumber: a19041000ux0052
Can Be Used To Fasten Similar Or Different Materials Of Multiple Work-Pieces..
Rivets Can Also Be Used With A Rivet Cap To Improve Appearance Of Clinched End..
Tubular-Hole Rivets Often Used To Pierce And Clinch Materials Without A Pre-Drilled Or Punched Work-Piece Hole.
Long Length Rivets Can Be Applied Without Buckling Or Bending The Rivet Shank..
Features
- Semi-Tubular Rivet ; 5mm Shank Diameter, 28mm Shank Length; Aluminum
- Long length rivets can be applied without buckling or bending the rivet shank.
- Can be used to fasten similar or different materials of multiple work-pieces.
- Tubular-hole rivets often used to pierce and clinch materials without a pre-drilled or punched work-piece hole
- Rivets can also be used with a rivet cap to improve appearance of clinched end.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search