UP to 450C PT1000 Thermistor Cartridge High Temperature Sensor for 3D Printer Volcano V6 Heater Block Hotend PEEK PEI Printing
Asin: B0B5XLX8HZ
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Pt1000 Sensors Can Direct Replace The Thermistors In Your Printer Without Adding An Amplifier Board Like Pt100's Sensors. But Whith The Default 4.7K Pullup Resister On Board You Will Get Lower Resolution Than Other Sensors..
Package: 1 X 1Meter Length Pt1000 Seneor With Sealed With Metal Cartridge ; 4 X 1K 0.1% Smd Resistors 0603 Package; And 1 X 2P 2.54Mm Terminal Wire.
Pt1000 Sensors Are Compatible With Most Firmwares In The Field. Pt1000 Sensors Are Potentially A Good Cost And Performance Compromise Between Thermistors And Pt100 Sensors. If You Want Release Potential Abilities Of The Pt1000 Sensors,You Need To Replace The 4.7Kpullup Resister Of The Thermistor Pins With A 1K 0.1% Resister..
Pt1000 Sensors Are Able To Measure Higher Temperatures Than Thermistors - Up To 450°C,And Are More Accurate Then Both Thermistors And Thermocouples In General. About The Firmware Setting, Please Check This Forum: Https://Github.Com/Polisi3d/Pt1000-Thermistor-Cartridge.
Features
- Thermistor Cartrodge PT1000 Used for many heater block which has 3.1mm temperature thermistor hole like v6 hotend Volcano Hotend Maximum support to 450 degrees.
- PT1000 sensors are able to measure higher temperatures than thermistors - up to 450 C,and are more accurate then both thermistors and thermocouples in general. About the firmware setting, please check this forum: https://github.com/POLISI3D/PT1000-thermistor-cartridge
- PT1000 sensors can direct replace the thermistors in your printer without adding an amplifier board like PT100's sensors. but whith the default 4.7K pullup resister on board you will get lower resolution than other sensors.
- PT1000 sensors are compatible with most firmwares in the field. PT1000 sensors are potentially a good cost and performance compromise between thermistors and PT100 sensors. If you want release potential abilities of the PT1000 sensors,you need to replace the 4.7Kpullup resister of the thermistor pins with a 1K 0.1% resister.
- Package: 1 x 1meter length PT1000 seneor with sealed with metal cartridge ; 4 x 1K 0.1% SMD Resistors 0603 package; and 1 x 2P 2.54MM Terminal wire
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
See On Amazon Similar To UP to 450C PT1000 Thermistor
#1
WINSINN HT-NTC100K Thermistor Sensor, Ender 3 v2 Upgrade 3x15 3950 XH2.54 2Pin, Compatible with Ender 3 5 Pro CR6 CR10 Series 3D Printer Hotend (Pack of 5Pcs)
Asin: B07F3SMRLJ | Ean: 0686603769546 | UPC: 686603769546
✔️Adopts 304 Stainless Steel, With The Internal Temperature Package To Ensure The Maximum Service Life With Precision Temperature Measurement..
✔️Made By Winsinn. Can Be Used With The New Sensor Heater Block (Temperature Measurement Can Be Up To 350 Degrees)..
✔️Ht-Ntc100k Thermistor Adopts White High-Temperature Cord, Can Bear Higher Temperature. And For Customers' Convenience, The Wires Adopts Line Connection, The Customer Can Tear The Wires Depends On Their Application. The High Temperature Line Is Double Thicker Than Others In The Market, Not Easy To Break Off..
✔️The Temperature Measurement: -50 °C ~ +350 °C, Can Replace The Original K-Type Thermocouple Temperature. Fit For Printing High-Temperature Filament..
Features
- Upgrade HT-NTC100K Thermistor: package temperature measurement. Head diameter: 3mm, Head length: 15mm
- The temperature measurement: -50 C ~ +350 C, can replace the original K-type thermocouple temperature. Fit for printing high-temperature filament.
- Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
- HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
- Made by WINSINN. Can be used with the New Sensor Heater Block (Temperature measurement can be up to 350 degrees).
- See more on Amazon...
Brand: WINSINN | Manufacturer: WINSINN Technology Ltd
See On Amazon #2
CR6 SE Cartridge Heater 24V 40W + Thermistor HT-NTC100K 300C Degree High Temperature Sensor Compatible with Creality CR-6 Max/CR-5 PRO 3D Printer Accessoriess (Heater)
Asin: B09S5X6LF1
Thermistor Rod Size: 3X15mm, Ntc100k B3950, Upgraded, Can Reach Up To 300C Degree For Long Time Working..
Also Can Be Used For Other 3D Printer, But Please Must Pay Attention To The Length And Terminal When Using It For Other 3D Printers..
Compatible With Creality Cr6 Se/ Cr-6 Max/ Cr-5 Pro 3D Printer.
Heater Rod Size: Φ6x20mm, 24V 40W With Terminal Xh2.54, Cable Length With Terminal About 90Mm.
Features
- This kit includes 1piece heater cartridge and 1piece thermistor temperature sensor
- Heater rod size: 6X20mm, 24V 40W with terminal XH2.54, cable length with terminal about 90mm
- Thermistor rod size: 3x15mm, NTC100K B3950, upgraded, can reach up to 300C degree for long time working.
- Compatible with Creality CR6 SE/ CR-6 MAX/ CR-5 Pro 3D Printer
- Also can be used for other 3D Printer, but please must pay attention to the length and terminal when using it for other 3D Printers.
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
Dimensions: 0.24 x 3.54 x 0.24 inches | Weight: 0.02 pounds
See On Amazon #3
1-Pack Upgrade M3x15MM 300C High Temperature Sensor Cartridge Thermistor Compatible with VORON V2.4 V0.1 V1.8 3D Printer, Dragonfly BMS BMO Hotend/Dragon Hotend
Asin: B0B4RN3YYY
Dumet Wire Has The Same Expansion Co-Efficient As That Of The Encapsulating Glass, And The Diffusion Of Cuprous Oxide In The Glass During Encapsulation Is Beneficial To Improve The Encapsulation Strength With The Glass. In The Case Of More Reliable Use, It Has More Accurate Temperature Measurement Performance.
Package: 1Piece Thermistor.
Specially Designed Compatible With Voron Series 3D Printers, Also Can Be Used For Dragonfly Bms Bmo Hotend / Dragon Hotend And All V6 Hotend. If You Wanna Use It For Other 3D Printers, Please Must Change The Connector To Make It Fit Your Printer..
Apply Stainless Steel Close Sleeve Filled With Silicone Grease, Accurate Temperature Measurement, And Using Dumet Wire, Not Easy To Break And Short Circuit. Only 0.2°C Tolerance..
Features
- Model: NTC100K 3950; Cartridge size: OD3 x15mm, 15cm long cable, installed with XH2.54 connector, can sense -30 C -300 C degree
- Apply Stainless Steel Close Sleeve Filled with Silicone Grease, Accurate temperature measurement, and using Dumet wire, Not easy to break and short circuit. Only 0.2 C tolerance.
- Dumet wire has the same expansion co-efficient as that of the encapsulating glass, and the diffusion of cuprous oxide in the glass during encapsulation is beneficial to improve the encapsulation strength with the glass. In the case of more reliable use, it has more accurate temperature measurement performance
- Specially designed compatible with VORON series 3D Printers, also can be used for DragonFly BMS BMO Hotend / Dragon Hotend and All V6 hotend. If you wanna use it for other 3D Printers, please must change the connector to make it fit your printer.
- Package: 1piece thermistor
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
Weight: 0.01 pounds
See On Amazon #4
Imdinnogo BCZAMD PT1000-550BW Temperature Sensor Probe for CR-10 Plating Copper/3D Volcan/ V6 Brass 3D Printer Heater Block Thermistor Sensor Probe Resistant to high Temperature 1.5M/ 59 inch
Asin: B09TT1NHSY | Model: AIUS-1M Thermal Sensor Probe | PartNumber: AIUS-1M Thermal Sensor Probe
High Temperature Wire Silver Plated, The Platinum Resistor Is Waterproof. No Issues With Klippe, And Ebb36 Can Board.
Kindly Tips: About This Pt1000 Temperature Sensor, It Is No Issues To Probe Temperature Range:-40 °C ~ 500 °C. But It Is A Little Complicated, Before Ordering, Please Know Which Firmware( Marlin/Klippe/Rrf) Does Your Board Support, Whether It Is Open Source Or Not. Please Reference The Install Information For The Left Pictures..
Size: 3Mm X 15Mm, Wire Length 1.5Meter. Probe Temperature Range:-40 °C ~ 500 °C..
Electrical Design:The Resistor Probe Line Is Long Service Life, Resistant To High Temperature, Two Wire System..
Features
- Tips It is truly PT1000, not DS18B20, please reference the pictures. The temperature sensor probe is equipped cord 1.5 meter long, which is convenient connection for 3D printer, use for 3D priter hot end Cr-10 plating copper/V6 brass/V6 aluminum/Volcanic heating block.
- Electrical design:The resistor probe line is long service life, resistant to high temperature, two wire system.
- High temperature wire Silver plated, the platinum resistor is waterproof. No issues with Klippe, and EBB36 CAN board
- Size: 3mm x 15mm, wire length 1.5meter. Probe Temperature range:-40 C ~ 500 C.
- Kindly Tips: About this PT1000 temperature sensor, it is no issues to Probe Temperature range:-40 C ~ 500 C. But it is a little complicated, before ordering, please know which firmware( Marlin/Klippe/RRF) does your board support, whether it is open source or not. Please reference the install information for the left pictures.
- See more on Amazon...
Brand: Imdinnogo | Manufacturer: Aimengda
See On Amazon #5
Platinum RTD Pt1000 Sensor by Slice Engineering | for 3D Printers | Measure Up to 500 C | Comes with 2 Meters of Cable | 15 x 3 mm Sensor Cartridge
Asin: B0B6LQ9F1Y | Model: P-RTD-AC-0076 | PartNumber: P-RTD-AC-0076 | Ean: 0850005423461 | UPC: 850005423461
✔️ 15 Mm Long. 3 Mm Diameter Sensor Cartridge.
⚠ Warning: Please Check To Ensure Your Printer Is Compatible With Rtd Pt1000 Sensors, Otherwise The Rtd Pt1000 Will Not Work. For Highest Accuracy Results, We Recommend Coating The Rtd Pt1000 With Boron Nitride Paste..
✔️ 2 M Long Bare Leads Allow For Easy Adaptation To Any 3D Printer Build.
✔️ Totally Linear Temperature Response Improves Sensing Accuracy Across The Range.
Features
- Accurate from freeze-your-butt-off cold (-50 C) to instantly-boil-your-innards hot (500 C)
- Totally linear temperature response improves sensing accuracy across the range
- 15 mm long. 3 mm diameter sensor cartridge
- 2 m long bare leads allow for easy adaptation to any 3D printer build
- Warning: Please check to ensure your printer is compatible with RTD Pt1000 sensors, otherwise the RTD Pt1000 will not work. For highest accuracy results, we recommend coating the RTD Pt1000 with Boron Nitride Paste.
- See more on Amazon...
Brand: Slice Engineering | Manufacturer: Slice Engineering
Dimensions: 0.75 x 7.00 x 4.00 inches
Warranty: Lifetime warranty against manufacturing defects
See On Amazon #6
1piece 3D Printer 500 Thermistor T-D500 M3x15mm Cylindrical High Temperature Sensor 500 K500 Thermocouple Sensor Compatible with Volcano V6 Hotend PEI PEEK Nylon Carbon Fiber Printing
Asin: B0888NJ63W | Model: T-d500 | PartNumber: T-d500 | Ean: 0791300410643 | UPC: 791300410643
Compatible With Pt100 V6 Hotend Block, Prusa I3 Printer And This Thermocouple Sensor Is 3Mm X 15Mm Cylindrical Package For Compatibility With All Cartridge-Style Heater Blocks..
Durable, Flexible And Long Lasting; 450℃ Long Hours Guaranteed.
Features
- Package: 1piece T-D500 Thermistor cartridge with about 1 meter long cable
- Durable, Flexible and Long Lasting; 450 long hours guaranteed
- Compatible with PT100 V6 hotend block, Prusa i3 printer and This Thermocouple sensor is 3mm x 15mm cylindrical package for compatibility with all cartridge-style heater blocks.
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
Weight: 0.01 pounds
See On Amazon #7
1piece 3D Printer m3 PT100 Thermistor Cartridge Temperature Sensor m3x22mm Sensor Head with 1meter Cable for Compatible with Mosquito Hot End Hotend Extruder
Asin: B08294HYVF | Model: PT100 m3x22 | PartNumber: PT100 m3x22 | Ean: 0791300410315 | UPC: 791300410315
Package: 1 Pieces M3*22*1000Mm Pt100 Sensor.
This Sensor Is Not With Connector, Pls Know It Before Ordering It.
This Pt100 Sensor Is Compatible With Mosquito Hotend And Also Suitable For Other Hotends Which Can Be Used With M3x22mm Temperature Sensor Head.
Please Be Aware That A Pt100 Is Not The Same As A Thermistor And Unless Your Electronics Explicitly Supports Rtd Sensing Devices You Will Need An Amplifier Board..
Features
- The PT100 is high temperature Up to 400 degree (MAX 450C), High accuracy teperature sensor, now you can use it instead of thermistor on your V6 hotend, The PT100 sensor will not fit in the standard hotends, but can be used for Mosquito hotend and other suitable heater block hotend
- Please be aware that a PT100 is not the same as a thermistor and unless your electronics explicitly supports RTD sensing devices you will need an Amplifier Board.
- Package: 1 pieces m3*22*1000mm PT100 Sensor
- This PT100 sensor is compatible with Mosquito hotend and also suitable for other hotends which can be used with m3x22mm temperature sensor head
- This sensor is not with connector, pls know it before ordering it
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
See On Amazon #8
Ubibot RS485 PT-100 Thermocouple Temperature Probe, Platinum Resistor Sensor for Extreme Heat or Cold, Monitor -200 to 400 C,USB Connector, for WS1 Pro Device only
Asin: B081RRGH7H | Model: PT100 usb | PartNumber: PT100 usb | Ean: 0797153355261 | UPC: 797153355261
Instant Readings: When Connected With Our Device, You Are Able To View The Data On The Screen And Have Access To The Online Data Via The App And The Web Console..
High Accuracy: Industrial-Level Chip. Accuracy: B Level..
Long Term Storage: Our Platform Offers Free Plan With 200 Mb Storage. Data Synced To The Platform Can Be Stored Up To 2 Years With Default Settings..
Wide Range Of Monitoring: -200 To 400 C. Suitable For Industrial Use Cases..
Features
- RS485 interface, matches with Ubibot WS1 Pro device. Waterproof thermocouple probe.
- Wide range of monitoring: -200 to 400 C. Suitable for industrial use cases.
- Instant readings: when connected with our device, you are able to view the data on the screen and have access to the online data via the app and the web console.
- Long term storage: Our platform offers free plan with 200 MB storage. Data synced to the platform can be stored up to 2 years with default settings.
- High Accuracy: Industrial-level chip. Accuracy: B level.
- See more on Amazon...
Brand: UbiBot | Manufacturer: cloudforce
See On Amazon #9
3X 2 Wire PT1000 Temperature Sensor Thermistor Silicone Coated 1.5Meters Probe 45mm x 5mm -50-180 Centigrade RTDs
Asin: B0BM5YYZB4 | Ean: 4714080406244
Main : Controller Dosing, Meter, Sensor Room, Switch, Pressure Sensor And Meter And Alarmer, Solar Controllers, Pt1000, Pt100, Ntc10k, 50K Temperature Sensor, Water Alarmer.
Features
- 2 wire PT1000 Temperature Sensor Thermistor Silicone Coated 1.5 Probe 45mm x 5mm-50- 180 degrees centigrade Rtd
- Main : Controller Dosing, Meter, Sensor Room, Switch, Pressure Sensor and Meter and Alarmer, Solar Controllers, PT1000, PT100, NTC10K, 50K Temperature Sensor, Water Alarmer
- See more on Amazon...
Brand: Pasotim | Manufacturer: Pasotim
Dimensions: 0.39 x 5.12 x 4.92 inches | Weight: 0.23 pounds
See On Amazon #10
MAX31865 PT100 to PT1000 RTD Digital Converter Board Temperature Thermocouple Sensor Amplifier Module 3.3V/5V Temperature Thermocouple Sensor Amplifier Module PT100 to PT1000 Compatible with
Asin: B0D2GH25Z1 | Ean: 7625760001819
The Max31865 Input Has Over-Voltage Protections Up To ±45V, Providing Configurable Rtd And Cable Open Circuit And Short Circuit Conditions Detection..
The Max31865 Can Meet Almost All Your Rtd Requires, And Can Even Compensates For 3-Wire 4-Wire Rtd For Better Accuracy..
Connect To Any Microcontroller Spi And Read The Resistance Ratio From The Internal.
Could Be Used With Any Microcontroller, 3.3V Regulator And Level Shifting, Could Be Used With Any 2, 3 4 Wire Pt100 Rtd..
Features
- MAX31865, an easy-to-use thermistor to digital output converter optimized for use with resistance temperature detectors (RTD).
- Could be used with any microcontroller, 3.3V regulator and level shifting, could be used with any 2, 3 4 wire PT100 RTD.
- The MAX31865 input has over-voltage protections up to 45V, providing configurable RTD and cable open circuit and short circuit conditions detection.
- Connect to any microcontroller SPI and read the resistance ratio from the internal
- The MAX31865 can meet almost all your RTD requires, and can even compensates for 3-wire 4-wire RTD for better accuracy.
- See more on Amazon...
Brand: EAJORN | Manufacturer: EAJORN
See On Amazon #11
MAX31865 PT100 To PT1000 RTD Digital Converter Board Temperature Thermocouple Sensor Amplifier Module 3.3V/5V Temperature Thermocouple Sensor Amplifier Module PT100 To PT1000 Compatible With
Asin: B0D1KXN66L | Ean: 7620171363563
The Max31865 Input Has Over-Voltage Protections Up To ±45V, Providing Configurable Rtd And Cable Open Circuit And Short Circuit Conditions Detection..
Max31865, An Easy-To-Use Thermistor To Digital Output Converter Optimized For Use With Resistance Temperature Detectors (Rtd)..
Rtd Sensitivity Of External Resistance Setting, High-Precision Δ- Σadc Converts The Ratio Of Rtd Resistance To Reference Resistance Into Digital Output..
The Max31865 Can Meet Almost All Your Rtd Requires, And Can Even Compensates For 3-Wire 4-Wire Rtd For Better Accuracy..
Features
- Could be used with any microcontroller, 3.3V regulator and level shifting, could be used with any 2, 3 4 wire PT100 RTD.
- The MAX31865 can meet almost all your RTD requires, and can even compensates for 3-wire 4-wire RTD for better accuracy.
- The MAX31865 input has over-voltage protections up to 45V, providing configurable RTD and cable open circuit and short circuit conditions detection.
- RTD sensitivity of external resistance setting, high-precision - ADC converts the ratio of RTD resistance to reference resistance into digital output.
- MAX31865, an easy-to-use thermistor to digital output converter optimized for use with resistance temperature detectors (RTD).
- See more on Amazon...
Brand: Avejjbaey | Manufacturer: Avejjbaey
See On Amazon #12
atcdfuw 3D Printer Parts PT1000/PT100 Thermistor High-Temperature Filaments Resistance Sensor 450 Degrees Hotend Thermistor Sensor
Asin: B0CZJR2VVW | Ean: 7447534552712
Glass Fiber High-Temperature Wire, High-Temperature Resistant, Anti-Interference..
Equipped With Wire Insulation Protective Sleeve To Protect Your Safety And Avoid Electric Shock Due To Leakage..
Compatible Hot End:Cr10 Nf-Crazy.
The Sensor Can Measure High-Emperature, Up To 450 Degrees..
Features
- Probes 3x15mm
- The sensor can measure high-emperature, up to 450 degrees.
- Glass fiber high-temperature wire, high-temperature resistant, anti-interference.
- Compatible hot end:CR10 NF-crazy
- Equipped with wire insulation protective sleeve to protect your safety and avoid electric shock due to leakage.
- See more on Amazon...
Brand: atcdfuw | Manufacturer: atcdfuw
See On Amazon #13
CHENZILIN 3D Printer 450 Thermistor M3x12mm Cylindrical High-Temperature Sensor 450 Thermocouple Sensor for Prusa i3 MK3S
Asin: B0CX939SCW | Ean: 7604960567875
This Thermocouple Sensor 3Mm X 12Mm Cylindrical Package..
Fit For Prusa I3 Mk3s.
Adopts 304 Stainless Steel, With The Internal Temperature Package To Ensure The Maximum Service Life With Temperature Measurement..
Flexible And Long-Lasting; 450℃ Long Hours Guaranteed..
Features
- Thermistor cartridge with about 1 meter long cable.
- Flexible and Long-Lasting; 450 long hours guaranteed.
- This Thermocouple sensor 3mm x 12mm cylindrical package.
- Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with temperature measurement.
- Fit for Prusa i3 MK3S
- See more on Amazon...
Brand: CHENZILIN | Manufacturer: CHENZILIN
See On Amazon #14
Syrisora PT1000-550BW PT100 Temperature Probe Resistor 3D Printer Platinum Thermal Sensor
Asin: B0CFKGRPMQ | Model: Syrisorantps1w9g78 | PartNumber: Syrisorantps1w9g78
The Equipped Cord Is 1 Meter Long For Convenient Connection..
High Quality And Durability,Applicable To Long Term Work..
Suitable For Volcanic Heating Block,V6 Brass,V6 Aluminum,Cr-10 Plating Copper..
The Temperature Sensor Probe Is For 3D Printer..
Features
- The platinum resistor is resistant to high temperature and waterproof.
- The temperature sensor probe is for 3D printer.
- The equipped cord is 1 meter long for convenient connection.
- Suitable for Volcanic heating block,V6 brass,V6 Aluminum,Cr-10 plating copper.
- High quality and durability,applicable to long term work.
- See more on Amazon...
Brand: Syrisora | Manufacturer: Syrisora
See On Amazon #15
APAAZO PT1000 Thermistor Cartridge Compatible with 3D Printer Volcano/ V6 Heater Block Upto 450C PEEK PEI PT100 Printing
Asin: B0CDLX2683 | Ean: 9164886461872
Pt1000 Sensor Is Not Compatible With Lerdge K Motherboard.
Pt1000 Sensors Can Direct Replace The Thermistors In Your Printer Without Adding An Amplifier Board Like Pt100's Sensors.But Whith The Default 4.7K Pullup Resister On Board You Will Get Lower Resolution Than Other Sensors..
Pt1000 Sensors Are Able To Measure Higher Temperatures Than Thermistors - Upto 400°C,And Are More Accurate Then Both Thermistors And Thermocouples In General..
Compatible Volcano Heater Block.
Features
- Compatible V6 Heater Block(NEW) .
- Compatible Volcano Heater Block
- PT1000 sensor is not compatible with Lerdge K motherboard
- PT1000 sensors are able to measure higher temperatures than thermistors - upto 400 C,and are more accurate then both thermistors and thermocouples in general.
- PT1000 sensors can direct replace the thermistors in your printer without adding an amplifier board like PT100's sensors.but whith the default 4.7K pullup resister on board you will get lower resolution than other sensors.
- See more on Amazon...
Brand: APAAZO | Manufacturer: NBXUNTAI
Weight: 0.00 pounds
See On Amazon
Looking For Something Else?
Search