uxcell 7mm Solid Round Clear Glass Ball Boiling Stones Soda Lime Glass Beads 100pcs
Asin: B0B5XM83PW | Model: a21031100ux0473 | PartNumber: a21031100ux0473 | Ean: 4894878093310
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features - Solid Round With Polished Smooth Surface. The Diameter Tolerance Is About +/-0.02Mm. Softening Point: 726C / 1340F.
Notice - Confirm The Ball Diameter Before Ordering..
Applications - Glass Balls Are Especially Useful For Model Paint Mixing, Grinding And Sanding, Or Use As Lab Boiling Stones..
Material - Made Of Soda-Lime Glass, Which Has Good Resistance To Solvent And High-Temp..
Features
- Size - 7mm Diameter. The package includes 100 pieces of balls
- Material - Made of soda-lime glass, which has good resistance to solvent and high-temp.
- Features - Solid round with polished smooth surface. The diameter tolerance is about +/-0.02mm. Softening Point: 726C / 1340F
- Applications - Glass balls are especially useful for model paint mixing, grinding and sanding, or use as lab boiling stones.
- Notice - Confirm the Ball Diameter before ordering.
- See more on Amazon...
Brand: uxcell | Manufacturer: uknown
See On Amazon Similar To uxcell 7mm Solid Round Clear
#1
uxcell M6 X 1.0 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel Screw Thread Cutting Die
Asin: B07R44HM9G | Model: a18122900ux0471 | PartNumber: a18122900ux0471
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: M6 X 1.0; outside diameter (OD): 20mm / 0.8"; Thickness: 7mm / 0.28"; fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #2
uxcell M5 x 0.8 Metric Round Die, Machine Thread Right Hand Threading Die, Alloy Steel Screw Thread Cutting Die
Asin: B0CTMRWLCS
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: M5 x 0.8 (right hand); outside diameter (OD): 20mm / 0.79"; Thickness: 7mm / 0.28"; fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell 1/4-28 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die
Asin: B07SWJPX9K | Model: a19050800ux0960 | PartNumber: a19050800ux0960
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 1/4-28 UNF; outside diameter (OD): 20mm / 0.8"; Thickness: 7mm / 0.28"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell 1/4-20 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die, 2pcs
Asin: B07SQ67MJJ | Model: a19050800ux0959 | PartNumber: a19050800ux0959
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 1/4-20 UNC; outside diameter (OD): 20mm / 0.8"; Thickness: 7mm / 0.28"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell 7mm PP Solid Plastic Balls, Precision Bearing Ball 200pcs
Asin: B0B5XMRLTK | Model: a19042300ux0288 | PartNumber: a19042300ux0288 | Ean: 4894878095512
G0-G3 Precision Grade Balls, Self-Lubricating.
Package Includes 200 Piece Balls.
Good Mechanical Characteristics And Corrosion, Collisions Resistance.
Widely Used In Non-Metal Low Load Ball Bearings.
Features
- 7mm in diameter
- Widely used in non-metal low load ball bearings
- G0-G3 precision grade balls, Self-lubricating
- Good mechanical characteristics and corrosion, collisions resistance
- Package includes 200 piece balls
- See more on Amazon...
Brand: uxcell | Manufacturer: uknown
See On Amazon #6
uxcell 10-32 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die, 2pcs
Asin: B07SQ63QH8 | Model: a19050800ux0955 | PartNumber: a19050800ux0955
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 10-32 UNF; outside diameter (OD): 20mm / 0.8"; Thickness: 7mm / 0.28"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #7
uxcell 25pcs 7mm Nylon Solid Plastic Bearing Balls G1 Precision
Asin: B0B5XN3KQS | Model: a21031100ux0095 | PartNumber: a21031100ux0095 | Ean: 4894878090142
Features - Pa66 Is Commonly Used For Applications That Require High Strength, Hardness, And Rigidity. It Has Good Electrical And Dielectric Properties..
Notice - Confirm The Ball Diameter Before Ordering..
Applications - Nylon Bearing Balls Are Especially Useful For Low Load Bearings, Special Valves, Check Valves, Fluid Level Indicators, Carburetors, Flow Meters, Laboratory Devices..
Material - Made Of Pa66 Nylon, With Greater Wear Resistance And High-Temp Resistance Than Pom..
Features
- Size - 7mm Diameter. The package includes 25 pieces of balls
- Material - Made of PA66 nylon, with greater wear resistance and high-temp resistance than POM.
- Features - PA66 is commonly used for applications that require high strength, hardness, and rigidity. It has good electrical and dielectric properties.
- Applications - Nylon bearing balls are especially useful for low load bearings, special valves, check valves, fluid level indicators, carburetors, flow meters, laboratory devices.
- Notice - Confirm the Ball Diameter before ordering.
- See more on Amazon...
Brand: uxcell | Manufacturer: uknown
See On Amazon #8
uxcell Plastic Shelf Support Pegs 20pcs 7mm Locking Shelf Pins, Cabinet Shelf Clips, Shelf Bracket Peg, for Kitchen Furniture Book Shelves Supplies, Clear
Asin: B07S6FN3NV | Model: a19040300ux0521 | PartNumber: a19040300ux0521
►【 Material】- Support Pegs Made Of Plastic, Using An Advanced Process, The Plastic Support Is Integrally Formed, Which Is Durable, Not Easy To Loose And Wear And Has A Long Service Life..
►【Easy To Use】- Use A Drill With The Same Diameter As The Pin To Process A Mounting Hole Slightly Larger Than 0.2Mm/0.01", And Then Insert The Pin Rod On The Laminate And Put The Partition On It..
►【Application】- Shelf Pegs Are Widely Used On Furniture, Shelf Supplies, Wine Cabinets, Display Cabinets, Bookshelves, Closets, Shoe Cabinets, Kitchen Solid Wood Plywood Plastic, Glass Board, And So On..
►【Advantage】- These Shelf Support Pegs Are Designed In Small Type, Which Made Them Hardly Noticeable And Prevents Shelf Wobble, It Makes The Board Sturdy Enough To Keep Level And Stable..
Features
- FEATURE - 7mm locking shelf pins are used to support a shelf in place on any project. In order for the pins to fit tightly, the holes should be equal to or a little smaller than the diameter shown. Suitable for the thickness of 18mm boards, the load of the product is Max 5 kg.
- ADVANTAGE - These shelf support pegs are designed in small type, which made them hardly noticeable and prevents shelf wobble, it makes the board sturdy enough to keep level and stable.
- MATERIAL - Support pegs made of plastic, using an advanced process, the plastic support is integrally formed, which is durable, not easy to loose and wear and has a long service life.
- APPLICATION - Shelf pegs are widely used on furniture, shelf supplies, wine cabinets, display cabinets, bookshelves, closets, shoe cabinets, kitchen solid wood plywood plastic, glass board, and so on.
- EASY TO USE - Use a drill with the same diameter as the pin to process a mounting hole slightly larger than 0.2mm/0.01, and then insert the pin rod on the laminate and put the partition on it.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell Flat Cable Clip Nail Coaxial Tacks Wire Clips 10mm White 200pcs
Asin: B07FF2Z3Q5 | Model: a18041000ux0097 | PartNumber: a18041000ux0097
Put The Cable Under The Clip And Hammer The Nail Into The Wall To Secure The Cable..
Can Install The Flat Cables To The Wall Or The Floorboard For A Clean Look And Prevent Tripping Over Loose Cable..
Strong And Solid, Perfect For Securing Wire To Walls, Door Frames And Skirting Boards..
Nail Length: 16Mm / 0.63"; External Size(Not Included Nail): 16 X 8 X 7Mm / 0.63" X 0.31" X 0.28" (L*W*H).
Features
- Product: Flat Cable Clip Nail; Internal Width: 10mm / 0.39"
- Nail Length: 16mm / 0.63; External Size(Not Included Nail): 16 x 8 x 7mm / 0.63 x 0.31 x 0.28 (L*W*H)
- Put the cable under the clip and hammer the nail into the wall to secure the cable.
- Strong and solid, Perfect for securing wire to walls, door frames and skirting boards.
- Can install the flat cables to the wall or the floorboard for a clean look and prevent tripping over loose cable.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 5.12 x 3.94 inches
See On Amazon #10
uxcell 50 PCS 6mm x 10.7mm Mount Dia 7.5mm Clear Rubber Wiring Grommets Gasket Ring Cable Protector
Asin: B0CKYZ7JG3
Materials: Rubber; Color: Clear.
Package Content: 50 (±2%) X Rubber Wiring Grommets.
Net Weight: 16G; Mount Diameter: 7.5Mm/0.3".
Outer Diameter: 10.7Mm/0.42"; Thickness: 7Mm/0.28".
Features
- Product Name: Rubber Wiring Grommet; Inner Diameter: 6mm/0.24"
- Outer Diameter: 10.7mm/0.42; Thickness: 7mm/0.28
- Materials: Rubber; Color: Clear
- Net Weight: 16g; Mount Diameter: 7.5mm/0.3
- Package Content: 50 ( 2%) x Rubber Wiring Grommets
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell 2pcs Clear Rigid PVC Pipe 19/32"(15mm) ID x 5/8"(16mm) x 1.3ft Round Tube Tubing
Asin: B0923Q7WMC | Model: a20111100ux0193 | PartNumber: a20111100ux0193
【Advantage】- Rigid Round Tubing Has A Very High Impact Resistance, High Transparency, Strong Chemical Stability..
【Widely Application】- Clear Pvc Tube Is Widely Used For Lamps And Lanterns, Aquarium, Fish Tank, Building Materials, Handicrafts, Diy And So On..
【Clear Rigid Tube】Transparent Pvc, Easy To See The Flow Of Liquid..
【 Material】- Round Pvc Tube Made In Pvc Material, Durable And Long Service Life. High Light Transmission, Resistance High Temperature..
Features
- FEATURE - 15mm ID x 16mm OD, 0.4m(1.3ft) Length Clear Rigid Tubing widely used in wire, cable, wire casings, etc.
- MATERIAL - Round PVC tube made in PVC material, durable and long service life. High light transmission, resistance high temperature.
- ADVANTAGE - Rigid Round Tubing has a very high impact resistance, high transparency, strong chemical stability.
- CLEAR RIGID TUBE Transparent PVC, easy to see the flow of liquid.
- WIDELY APPLICATION - Clear PVC tube is widely used for lamps and lanterns, aquarium, fish tank, building materials, handicrafts, DIY and so on.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #12
uxcell 7mm Solid Round Clear Glass Ball Boiling Stones Soda Lime Glass Beads 200pcs
Asin: B0B5XLPMN3 | Model: a21031100ux0474 | PartNumber: a21031100ux0474 | Ean: 4894878089573
Features - Solid Round With Polished Smooth Surface. The Diameter Tolerance Is About +/-0.02Mm. Softening Point: 726C / 1340F.
Notice - Confirm The Ball Diameter Before Ordering..
Applications - Glass Balls Are Especially Useful For Model Paint Mixing, Grinding And Sanding, Or Use As Lab Boiling Stones..
Material - Made Of Soda-Lime Glass, Which Has Good Resistance To Solvent And High-Temp..
Features
- Size - 7mm Diameter. The package includes 200 pieces of balls
- Material - Made of soda-lime glass, which has good resistance to solvent and high-temp.
- Features - Solid round with polished smooth surface. The diameter tolerance is about +/-0.02mm. Softening Point: 726C / 1340F
- Applications - Glass balls are especially useful for model paint mixing, grinding and sanding, or use as lab boiling stones.
- Notice - Confirm the Ball Diameter before ordering.
- See more on Amazon...
Brand: uxcell | Manufacturer: uknown
See On Amazon #13
uxcell 50pcs 7mm Nylon Solid Plastic Bearing Balls G1 Precision Solid Nylon Balls Bearings
Asin: B09CD7CFY7 | Model: a21031100ux0096 | PartNumber: a21031100ux0096
Features - Pa66 Is Commonly Used For Applications That Require High Strength, Hardness, And Rigidity. When Used For Precise And Effective Control, No Creep Phenomenon..
Notice - Confirm The Ball Diameter Before Ordering..
Applications - Nylon Bearing Balls Are Especially Useful For Low Load Bearings, Special Valves, Check Valves, Fluid Level Indicators, Carburetors, Flow Meters, Laboratory Devices. It Is Also Used In Aspects With Good Elasticity Requirements And High Hardness Requirements..
Material - Made Of Pa66 Nylon, With Greater Wear Resistance And High-Temp Resistance Than Pom. And With High Toughness And Good Mechanical Shock Absorption Ability..
Features
- Size - 7mm Diameter. The package includes 50 pieces of balls. With good dimensional stability.
- Material - Made of PA66 nylon, with greater wear resistance and high-temp resistance than POM. And with high toughness and good mechanical shock absorption ability.
- Features - PA66 is commonly used for applications that require high strength, hardness, and rigidity. When used for precise and effective control, no creep phenomenon.
- Applications - Nylon bearing balls are especially useful for low load bearings, special valves, check valves, fluid level indicators, carburetors, flow meters, laboratory devices. It is also used in aspects with good elasticity requirements and high hardness requirements.
- Notice - Confirm the Ball Diameter before ordering.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell 304 Stainless Steel Round Tube 7mm OD 1mm Wall Thickness 300mm Length
Asin: B09FP647W8 | Model: a21061700ux0438 | PartNumber: a21061700ux0438
[Seamless Construction] - The Surface Is Smooth And Seamless And Is Available In Mechanical Structural Components For Precision Applications..
[Applications] - Commonly Used In Industry, Ship Models, Pipelines, Mechanical Instrumentation, Mechanical Structural Components, Etc. Also For Home Decoration And Handicrafts, Such As Frames, Crafts, Gardening Products, Railings, Furniture, Etc..
[How To Use] - According To The Length You Need, It Can Be Processed By Using Professional Equipment. Besides, It Can Be Threaded Or Welded To Meet Your Needs..
[Surface Treatment] - Finish With Polishing, For Adding Gloss And Smooth Surface, Oxidation Resistance And Corrosion Resistance..
Features
- [Material] - Made of 304 stainless steel for high strength, weldability, wear resistance, heat resistance and long-lasting durability.
- [Surface Treatment] - Finish with polishing, for adding gloss and smooth surface, oxidation resistance and corrosion resistance.
- [Seamless Construction] - The surface is smooth and seamless and is available in mechanical structural components for precision applications.
- [How to Use] - According to the length you need, it can be processed by using professional equipment. Besides, it can be threaded or welded to meet your needs.
- [Applications] - Commonly used in industry, ship models, pipelines, mechanical instrumentation, mechanical structural components, etc. Also for home decoration and handicrafts, such as frames, crafts, gardening products, railings, furniture, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.04 x 11.81 x 0.28 inches
See On Amazon #15
uxcell 1/4-28 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die, 2pcs
Asin: B07SQ6X255 | Model: a19050800ux0961 | PartNumber: a19050800ux0961
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 1/4-28 UNF; outside diameter (OD): 20mm / 0.8"; Thickness: 7mm / 0.28"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #16
uxcell 10-24 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die, 2pcs
Asin: B07ST8TJFR | Model: a19050800ux0953 | PartNumber: a19050800ux0953
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 10-24 UNC; outside diameter (OD): 20mm / 0.8"; Thickness: 7mm / 0.28"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #17
uxcell Acrylic Round Rod,Clear,1/8 Diameter 10inch(247mm) Solid Plastic PMMA Bar Stick 8pcs
Asin: B07JM3THKK
【Advantages 】- Acrylic Rods Are Durable, Tougher Than Glass. Is A Glass Substitute Material That Is Often Used Frequently.Good Optical Clarity (93% Light Transmittance)..
【Application】- Plastic Acrylic Rod Good For Lighting Fixture, Architecture, Handicraft, Model Making, Exhibition Displays And Hobby Using..
【Easy To Used】- It Is Easy To Machine, Stable In Processing Performance And Good In Tensile Strength. Can Be Polishable, Perforated, Lathe Processing, Sandblastingit.
【Good Material】- Plastic Round Rod Made In Acrylic,Is A Lightweight, Tough Plastic That Offers More Exceptional Weatherability, Strength, Clarity And Versatility..
Features
- GOOD DESIGN - 247mm x 3mm / 9.72inch x 0.12inch Acrylic Clear Rod use for Architectural Model Making DIY
- GOOD MATERIAL - Plastic Round Rod made in Acrylic,is a lightweight, tough plastic that Offers more exceptional weatherability, strength, clarity and versatility.
- ADVANTAGES - Acrylic rods are durable, tougher than glass. is a glass substitute material that is often used frequently.Good optical clarity (93% light transmittance).
- EASY TO USED - It is easy to machine, stable in processing performance and good in tensile strength. Can be Polishable, perforated, lathe processing, sandblastingIt
- APPLICATION - Plastic Acrylic rod good for lighting fixture, architecture, handicraft, model making, exhibition displays and hobby using.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 9.84 x 1.97 inches
See On Amazon #18
uxcell Acrylic Round Rod,Clear,3/4 Inch Diameter 10inch(247mm) Length,Solid Plastic PMMA Bar
Asin: B07JKWGYKQ | Model: a18090700ux0084 | PartNumber: a18090700ux0084
【Advantages 】- Acrylic Rods Are Durable, Tougher Than Glass. Is A Glass Substitute Material That Is Often Used Frequently.Good Optical Clarity (93% Light Transmittance)..
【Application】- Plastic Acrylic Rod Good For Lighting Fixture, Architecture, Handicraft, Model Making, Exhibition Displays And Hobby Using..
【Easy To Used】- It Is Easy To Machine, Stable In Processing Performance And Good In Tensile Strength. Can Be Polishable, Perforated, Lathe Processing, Sandblastingit.
【Good Material】- Plastic Round Rod Made In Acrylic,Is A Lightweight, Tough Plastic That Offers More Exceptional Weatherability, Strength, Clarity And Versatility..
Features
- GOOD DESIGN - 247mm x 20mm / 9.72inch x 0.79inch Acrylic Clear Round Bubble Rod use for Architectural Model Making DIY
- GOOD MATERIAL - Plastic Round Rod made in Acrylic,is a lightweight, tough plastic that Offers more exceptional weatherability, strength, clarity and versatility.
- ADVANTAGES - Acrylic rods are durable, tougher than glass. is a glass substitute material that is often used frequently.Good optical clarity (93% light transmittance).
- EASY TO USED - It is easy to machine, stable in processing performance and good in tensile strength. Can be Polishable, perforated, lathe processing, sandblastingIt
- APPLICATION - Plastic Acrylic rod good for lighting fixture, architecture, handicraft, model making, exhibition displays and hobby using.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell M7 x 0.75 Metric Round Die, Machine Thread Right Hand Threading Die, Alloy Steel Screw Thread Cutting Die
Asin: B07Q4N4ZQH | Model: a18122900ux0438 | PartNumber: a18122900ux0438
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: M7 x 0.75 (right hand); outside diameter (OD): 25mm / 1.0"; Thickness: 7mm / 0.28"; accuracy class: 6g; fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search