uxcell 9mm Solid Round Clear Glass Ball Boiling Stones Soda Lime Glass Beads 200pcs
Asin: B0B5XMFB91 | Model: a21031100ux0478 | PartNumber: a21031100ux0478 | Ean: 4894878071912
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features - Solid Round With Polished Smooth Surface. The Diameter Tolerance Is About +/-0.02Mm. Softening Point: 726C / 1340F.
Notice - Confirm The Ball Diameter Before Ordering..
Applications - Glass Balls Are Especially Useful For Model Paint Mixing, Grinding And Sanding, Or Use As Lab Boiling Stones..
Material - Made Of Soda-Lime Glass, Which Has Good Resistance To Solvent And High-Temp..
Features
- Size - 9mm Diameter. The package includes 200 pieces of balls
- Material - Made of soda-lime glass, which has good resistance to solvent and high-temp.
- Features - Solid round with polished smooth surface. The diameter tolerance is about +/-0.02mm. Softening Point: 726C / 1340F
- Applications - Glass balls are especially useful for model paint mixing, grinding and sanding, or use as lab boiling stones.
- Notice - Confirm the Ball Diameter before ordering.
- See more on Amazon...
Brand: uxcell | Manufacturer: uknown
See On Amazon Similar To uxcell 9mm Solid Round Clear
#1
uxcell 12mm Cable Wire Clips Nail-in Wire Nail Clamps Cord Organizer Tie Holder 100pcs
Asin: B07X9CTQGY | Model: a19070400ux0811 | PartNumber: a19070400ux0811
【Family Standby】Durable And Extensively Used Clamps, Versatile Clips For Home And Office..
【Easy Installation】Just Use A Hammer To Nail Then To Your Mounting Surface And You Will Get A Cleaner Look.
【Wide Applications】Suit For Various Cables Such As Computer Cables, Tv Cables, Usb Cables And So On. Also A Good Choice For Routing Cables Such As Tv Coaxial Cable.
【Cable Organization】Keep Your Place Neat And Organized. Help You Free From Annoyance Of Disordered Cables.
Features
- SIZE Supports most cable with 12mm outer diameter or smaller. 100 pieces with steel nails
- CABLE ORGANIZATION Keep your place neat and organized. Help you free from annoyance of disordered cables
- FAMILY STANDBY Durable and extensively used clamps, versatile clips for home and office.
- WIDE APPLICATIONS Suit for various cables such as computer cables, TV cables, USB cables and so on. Also a good choice for routing cables such as TV coaxial cable
- EASY INSTALLATION Just use a hammer to nail then to your mounting surface and you will get a cleaner look
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell 5/16-18 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die
Asin: B07SR9P69J | Model: a19050800ux0962 | PartNumber: a19050800ux0962
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 5/16-18 UNC; outside diameter (OD): 25mm / 1.0"; Thickness: 9mm / 0.35"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell Flat Cable Clip Nail Coaxial Tacks Wire Clips 10mm White 200pcs
Asin: B07FF2Z3Q5 | Model: a18041000ux0097 | PartNumber: a18041000ux0097
Put The Cable Under The Clip And Hammer The Nail Into The Wall To Secure The Cable..
Can Install The Flat Cables To The Wall Or The Floorboard For A Clean Look And Prevent Tripping Over Loose Cable..
Strong And Solid, Perfect For Securing Wire To Walls, Door Frames And Skirting Boards..
Nail Length: 16Mm / 0.63"; External Size(Not Included Nail): 16 X 8 X 7Mm / 0.63" X 0.31" X 0.28" (L*W*H).
Features
- Product: Flat Cable Clip Nail; Internal Width: 10mm / 0.39"
- Nail Length: 16mm / 0.63; External Size(Not Included Nail): 16 x 8 x 7mm / 0.63 x 0.31 x 0.28 (L*W*H)
- Put the cable under the clip and hammer the nail into the wall to secure the cable.
- Strong and solid, Perfect for securing wire to walls, door frames and skirting boards.
- Can install the flat cables to the wall or the floorboard for a clean look and prevent tripping over loose cable.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 5.12 x 3.94 Inches
See On Amazon #4
uxcell 5/16-32 UNEF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die
Asin: B07SQ5N7M9 | Model: a19050800ux0966 | PartNumber: a19050800ux0966
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 5/16-32 UNEF; outside diameter (OD): 25mm / 1.0"; Thickness: 9mm / 0.35"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #5
uxcell 9mm Solid Round Clear Glass Ball Boiling Stones Soda Lime Glass Beads 100pcs
Asin: B0B5XM3TC6 | Model: a21031100ux0477 | PartNumber: a21031100ux0477 | Ean: 4894878090722
Features - Solid Round With Polished Smooth Surface. The Diameter Tolerance Is About +/-0.02Mm. Softening Point: 726C / 1340F.
Notice - Confirm The Ball Diameter Before Ordering..
Applications - Glass Balls Are Especially Useful For Model Paint Mixing, Grinding And Sanding, Or Use As Lab Boiling Stones..
Material - Made Of Soda-Lime Glass, Which Has Good Resistance To Solvent And High-Temp..
Features
- Size - 9mm Diameter. The package includes 100 pieces of balls
- Material - Made of soda-lime glass, which has good resistance to solvent and high-temp.
- Features - Solid round with polished smooth surface. The diameter tolerance is about +/-0.02mm. Softening Point: 726C / 1340F
- Applications - Glass balls are especially useful for model paint mixing, grinding and sanding, or use as lab boiling stones.
- Notice - Confirm the Ball Diameter before ordering.
- See more on Amazon...
Brand: uxcell | Manufacturer: uknown
See On Amazon #6
uxcell Circle Cable Clip Nail Coaxial Tacks Wire Clips 12mm White 40pcs
Asin: B07FF2GD35 | Model: a18041000ux0091 | PartNumber: a18041000ux0091
Put The Cable Under The Clip And Hammer The Nail Into The Wall To Secure The Cable..
Can Install The Flat Cables To The Wall Or The Floorboard For A Clean Look And Prevent Tripping Over Loose Cable..
Strong And Solid, Perfect For Securing Wire To Walls, Door Frames And Skirting Boards..
Nail Length: 25Mm / 0.98"; External Size(Not Included Nail): 19 X 7 X 14Mm / 0.75" X 0.28" X 0.55" (L*W*H).
Features
- Product: Round Cable Clip Nail; Internal Width: 12mm / 0.47"
- Nail Length: 25mm / 0.98; External Size(Not Included Nail): 19 x 7 x 14mm / 0.75 x 0.28 x 0.55 (L*W*H)
- Put the cable under the clip and hammer the nail into the wall to secure the cable.
- Strong and solid, Perfect for securing wire to walls, door frames and skirting boards.
- Can install the flat cables to the wall or the floorboard for a clean look and prevent tripping over loose cable.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 2.76 x 2.76 Inches
See On Amazon #7
uxcell 5/16-32 UNEF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die, 2pcs
Asin: B07SR6YFPK | Model: a19050800ux0967 | PartNumber: a19050800ux0967
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 5/16-32 UNEF; outside diameter (OD): 25mm / 1.0"; Thickness: 9mm / 0.35"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #8
uxcell 5/16-24 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die
Asin: B07SS6JGLQ | Model: a19050800ux0964 | PartNumber: a19050800ux0964
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 5/16-24 UNF; outside diameter (OD): 25mm / 1.0"; Thickness: 9mm / 0.35"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #9
uxcell 5/16-24 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die, 2pcs
Asin: B07SQ6PJDG | Model: a19050800ux0965 | PartNumber: a19050800ux0965
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 5/16-24 UNF; outside diameter (OD): 25mm / 1.0"; Thickness: 9mm / 0.35"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell Flat Cable Clip Nail Coaxial Tacks Wire Clips 5mm White 200pcs
Asin: B07FF2WVMN | Model: a18041000ux0094 | PartNumber: a18041000ux0094
Put The Cable Under The Clip And Hammer The Nail Into The Wall To Secure The Cable..
Can Install The Flat Cables To The Wall Or The Floorboard For A Clean Look And Prevent Tripping Over Loose Cable..
Strong And Solid, Perfect For Securing Wire To Walls, Door Frames And Skirting Boards..
Nail Length: 14Mm / 0.55"; External Size(Not Included Nail): 10 X 5 X 5Mm / 0.39" X 0.2" X 0.2" (L*W*H).
Features
- Product: Flat Cable Clip Nail; Internal Width: 5mm / 0.2"
- Nail Length: 14mm / 0.55; External Size(Not Included Nail): 10 x 5 x 5mm / 0.39 x 0.2 x 0.2 (L*W*H)
- Put the cable under the clip and hammer the nail into the wall to secure the cable.
- Strong and solid, Perfect for securing wire to walls, door frames and skirting boards.
- Can install the flat cables to the wall or the floorboard for a clean look and prevent tripping over loose cable.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 3.54 x 2.76 inches
See On Amazon #11
uxcell Acrylic Round Rod,Clear,1/8 Diameter 10inch(247mm) Solid Plastic PMMA Bar Stick 8pcs
Asin: B07JM3THKK
【Advantages 】- Acrylic Rods Are Durable, Tougher Than Glass. Is A Glass Substitute Material That Is Often Used Frequently.Good Optical Clarity (93% Light Transmittance)..
【Application】- Plastic Acrylic Rod Good For Lighting Fixture, Architecture, Handicraft, Model Making, Exhibition Displays And Hobby Using..
【Easy To Used】- It Is Easy To Machine, Stable In Processing Performance And Good In Tensile Strength. Can Be Polishable, Perforated, Lathe Processing, Sandblastingit.
【Good Material】- Plastic Round Rod Made In Acrylic,Is A Lightweight, Tough Plastic That Offers More Exceptional Weatherability, Strength, Clarity And Versatility..
Features
- GOOD DESIGN - 247mm x 3mm / 9.72inch x 0.12inch Acrylic Clear Rod use for Architectural Model Making DIY
- GOOD MATERIAL - Plastic Round Rod made in Acrylic,is a lightweight, tough plastic that Offers more exceptional weatherability, strength, clarity and versatility.
- ADVANTAGES - Acrylic rods are durable, tougher than glass. is a glass substitute material that is often used frequently.Good optical clarity (93% light transmittance).
- EASY TO USED - It is easy to machine, stable in processing performance and good in tensile strength. Can be Polishable, perforated, lathe processing, sandblastingIt
- APPLICATION - Plastic Acrylic rod good for lighting fixture, architecture, handicraft, model making, exhibition displays and hobby using.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 9.84 x 1.97 inches
See On Amazon #12
uxcell 5/16-18 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die, 2pcs
Asin: B07SXK5YDM | Model: a19050800ux0963 | PartNumber: a19050800ux0963
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 5/16-18 UNC; outside diameter (OD): 25mm / 1.0"; Thickness: 9mm / 0.35"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell 5/16-32 UNEF Metric Tap and Die Set, HSS Machine Thread Screw Tap with Alloy Tool Steel Round Threading Die Silver Tone (2Pcs)
Asin: B0C1VMYV31
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: Used With Tapping Oil Can Get Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Thread size: 5/16-32 UNEF.Made of high speed steel and alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell 9mm POM Coin Ring Making Balls, Plastic Bearing Ball 50pcs
Asin: B0B5XLYXXR | Model: a19042300ux0272 | PartNumber: a19042300ux0272 | Ean: 4894878080815
G0-G3 Precision Grade Balls, Self-Lubricating.
Package Includes 50 Piece Balls.
Excellent Strength, High Toughness And Wear Resistance.
Helps Prevent Marring The Coin Surface.
Features
- 9mm in diameter
- Helps prevent marring the coin surface
- G0-G3 precision grade balls, Self-lubricating
- Excellent strength, high toughness and wear resistance
- Package includes 50 piece balls
- See more on Amazon...
Brand: uxcell | Manufacturer: uknown
See On Amazon #15
uxcell 8mm Cable Wire Clips Nail-in Wire Nail Clamps Cord Organizer Tie Holder 100pcs
Asin: B07X7P8H61 | Model: a19070400ux0807 | PartNumber: a19070400ux0807
【Family Standby】Durable And Extensively Used Clamps, Versatile Clips For Home And Office..
【Easy Installation】Just Use A Hammer To Nail Then To Your Mounting Surface And You Will Get A Cleaner Look.
【Wide Applications】Suit For Various Cables Such As Computer Cables, Tv Cables, Usb Cables And So On. Also A Good Choice For Routing Cables Such As Tv Coaxial Cable.
【Cable Organization】Keep Your Place Neat And Organized. Help You Free From Annoyance Of Disordered Cables.
Features
- SIZE Supports most cable with 8mm outer diameter or smaller. 100 pieces with steel nails
- CABLE ORGANIZATION Keep your place neat and organized. Help you free from annoyance of disordered cables
- FAMILY STANDBY Durable and extensively used clamps, versatile clips for home and office.
- WIDE APPLICATIONS Suit for various cables such as computer cables, TV cables, USB cables and so on. Also a good choice for routing cables such as TV coaxial cable
- EASY INSTALLATION Just use a hammer to nail then to your mounting surface and you will get a cleaner look
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell M8 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die, 2pcs
Asin: B08HY4FJQZ | Model: a19122800ux0384 | PartNumber: a19122800ux0384
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: M8; outside diameter (OD): 25mm / 1.0"; Thickness: 9mm / 0.35"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.10 pounds
See On Amazon #17
uxcell 10mm Cable Wire Clips Nail-in Wire Nail Clamps Cord Organizer Tie Holder 100pcs
Asin: B07X7P76ZR | Model: a19070400ux0809 | PartNumber: a19070400ux0809
【Family Standby】Durable And Extensively Used Clamps, Versatile Clips For Home And Office..
【Easy Installation】Just Use A Hammer To Nail Then To Your Mounting Surface And You Will Get A Cleaner Look.
【Wide Applications】Suit For Various Cables Such As Computer Cables, Tv Cables, Usb Cables And So On. Also A Good Choice For Routing Cables Such As Tv Coaxial Cable.
【Cable Organization】Keep Your Place Neat And Organized. Help You Free From Annoyance Of Disordered Cables.
Features
- SIZE Supports most cable with 10mm outer diameter or smaller. 100 pieces with steel nails
- CABLE ORGANIZATION Keep your place neat and organized. Help you free from annoyance of disordered cables
- FAMILY STANDBY Durable and extensively used clamps, versatile clips for home and office.
- WIDE APPLICATIONS Suit for various cables such as computer cables, TV cables, USB cables and so on. Also a good choice for routing cables such as TV coaxial cable
- EASY INSTALLATION Just use a hammer to nail then to your mounting surface and you will get a cleaner look
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell M8 x 1.25 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel Screw Thread Cutting Die
Asin: B07R9W9V3B | Model: a18122900ux0473 | PartNumber: a18122900ux0473
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: M8 X 1.25; outside diameter (OD): 25mm / 1.0"; thickness: 9mm / 0.35"; cutting direction: left hand; fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 5/16-18 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Steel Screw Thread Cutting Die
Asin: B07R562QXV | Model: a18122900ux0419 | PartNumber: a18122900ux0419
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 5/16-18 UNC; outside diameter (OD): 25mm / 1.0"; Thickness: 9mm / 0.35"; fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search