RF Detector Module,1PC AD8361 RF Microwave Real Power Detector AM Detector Amplitude Detection
Asin: B0B62KDBNW
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Stable And Reliable】: Using High-Quality Circuit Boards, Stable And Reliable.
【Frequency Range】: Working Frequency Range 10Khz-2500Mhz.
【Rf Signal】: Rf Signal Is Converted Into Voltage Output. Rf Signal Corresponding To Output Voltage Amplitude Or Power.
【Rf Connector】: The Rf Connector Of This Rf Detector Board Is A Standard Sma Female Header.
Features
- Application : Power meter, level tester, power sampling, test debugging
- RF Connector : The RF connector of this RF detector board is a standard SMA female header
- Stable and Reliable : Using high-quality circuit boards, stable and reliable
- RF Signal : RF signal is converted into voltage output. RF signal corresponding to output voltage amplitude or power
- Frequency Range : Working frequency range 10KHZ-2500MHZ
- See more on Amazon...
Brand: Tefola | Manufacturer: Tefola
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.02 Pounds
See On Amazon Similar To RF Detector Module1PC AD8361 RF
#1
WWZMDiB 5Pcs RFID Kit - MF RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring + Male to Female Jumper Wires for Arduino Raspberry Pi
Asin: B0CCF4SNMF | Ean: 0705252403547 | UPC: 705252403547
🥇Low Voltage, Low Cost, Small Size Contactless Card Reader Mf Rc522 Chip.
🥉Rfid Rc522 Module Is A Better Choice For The Development Of Smart Meters And Portable Handheld Devices.
🥈Mfrc522 Supports Mifare Series Higher-Speed Contactless Communication, Bidirectional Data Transmission Rate Up To 424Kbit/S.
⚡【Working Voltage】: 3.3V.
Features
- MF RC522 is a highly integrated contactless (13.56MHz) card reader chip.
- Working Voltage : 3.3V
- Low voltage, low cost, small size contactless card reader MF RC522 chip
- MFRC522 Supports MIFARE series higher-speed contactless communication, bidirectional data transmission rate up to 424kbit/s
- RFID RC522 Module is a better choice for the development of smart meters and portable handheld devices
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #2
Deegoo-FPV New 12pcs NRF24L01+ 2.4GHz Arduino Wireless RF Transceiver Module
Asin: B07GZ17ZWS | Model: 8541549611 | PartNumber: 8541549611 | Ean: 0608603912067 | UPC: 608603912067
Built-In Hardware Crc Error Detection, Multipoint Communication Address Control. Built-In 2.4Ghz Antenna..
Applications: Wireless Peripherals, Remote Control Systems Such As Rc Vehicles And Consumer Remote Electronics, Wireless Voice Transmission Such As Voip, Wireless Sensor Networks, Wireless Networks, Home And Commercial Automation..
Nrf24l01 Is A Single Chip Radio Transceiver For The Worldwide 2.4 - 2.5 Ghz Ism Band. Compatible With Arduino And Raspberry Pi..
125 Communications Channels, Multi-Point Communication And Frequency Hopping To Meet The Communication Needs..
Features
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.
- 125 Communications channels, Multi-point communication and frequency hopping to meet the communication needs.
- Built-in hardware CRC error detection, Multipoint communication address control. Built-in 2.4Ghz antenna.
- nRF24L01 is a single chip radio transceiver for the worldwide 2.4 - 2.5 GHz ISM band. Compatible with Arduino and Raspberry Pi.
- Applications: wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation.
- See more on Amazon...
Brand: Deegoo-FPV | Manufacturer: Deegoo-FPV
See On Amazon #3
HiLetgo 315Mhz RF Transmitter and Receiver Module link kit for Arduino/ARM/MCU/Raspberry pi
Asin: B00LNADJS6 | Model: 3-01-0082 | PartNumber: 3-01-0082 | Ean: 0797698770284 | UPC: 797698770284
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 2.00 x 3.00 x 0.30 inches
See On Amazon #4
5Pcs 433MHz RF Wireless Transmitter and Receiver Module Kit for ARM/MCU
Asin: B08TMKKZ74 | Model: 19110 | PartNumber: 19110 | Ean: 0701715459694 | UPC: 701715459694
Note: The Vcc Voltage Should Be Consistent With The Working Voltage Of The Module, And The Power Filter Should Be Done Well; The Position Of The Antenna Should Be As Straight As Possible, Away From The Shield, High Voltage And Interference Source.When Used,The Receiving Frequency, Decoding Mode And Oscillating Resistance Should Match The Transmitting..
Package Included: 5 X 433Mhz Wireless Transmitter Module+5 X 433Mhz Wireless Receiver Module.
Applications: The Transmitter And Receiver Modules For Increasing The Communication Distance. And The Frequency Is 433Mhz.It Is Widely Used In Remote Control Systems, Such As Remote Control Switch/Curtain/Sockets/Led/Audio/Door/Rolling Gate/Door Opener, Shutter And Other Door Control Systems, Alarm Host, Alarm, Remote Control Motorcycle, Remote Control Controlled Electric Vehicle, Remote Control Mp3, Receiving Module, Automobile Anti-Theft Products, Home Anti-Theft Products, Electric Doors,Etc..
Easy To Use: The Antenna Has A Great Influence On The Receiving Effect Of The Module,It Is Better To Connect The Antenna With 1/4 Wavelength. Generally, 50 Ohm Single-Core Conductor Is Used. The Antenna Length Of 433M Is About 17Cm.(Note:No Antenna, Please Bring Your Own Antenna.) Nice Range (Using Antenna On Both), You Can Send Strings (Text) From One Point To Another. If You Want To Automate Your House Without Pulling Cables Then This Device Will Help You Well..
Features
- Wireless Transmitter Modules: It allow your to wirelessly communicate with radio frequency (RF) controlled devices that operate in the same frequency (433Mhz in this case).
- Easy to Use: The antenna has a great influence on the receiving effect of the module,it is better to connect the antenna with 1/4 wavelength. Generally, 50 ohm single-core conductor is used. The antenna length of 433M is about 17cm.(Note:No antenna, please bring your own antenna.) Nice range (using antenna on both), you can send strings (text) from one point to another. If you want to automate your house without pulling cables then this device will help you well.
- Note: The VCC voltage should be consistent with the working voltage of the module, and the power filter should be done well; The position of the antenna should be as straight as possible, away from the shield, high voltage and interference source.When used,the receiving frequency, decoding mode and oscillating resistance should match the transmitting.
- Applications: The transmitter and receiver modules for increasing the communication distance. And the frequency is 433MHz.It is widely used in remote control systems, such as remote control switch/curtain/sockets/LED/audio/door/rolling gate/door opener, shutter and other door control systems, alarm host, alarm, remote control motorcycle, remote control controlled electric vehicle, remote control MP3, receiving module, automobile anti-theft products, home anti-theft products, electric doors,etc.
- Package included: 5 x 433MHz Wireless Transmitter Module+5 x 433MHz Wireless Receiver Module
- See more on Amazon...
Brand: Atnsinc | Manufacturer: Atnsinc
See On Amazon #5
RFID Reader Module, 9-12V 125khz Embedded Control Board Access Control Module
Asin: B07Z7NCDF4 | Ean: 0739879364257 | UPC: 739879364257
✅Widely Applicable: This Product Is Suitable For All 125Khz Cards. Wide Compatibility, Don't Worry About Selling Back And Not Using It..
✅Quality Service: We Are Very Confident In Our Products. If You Have Any Questions During The Process Of Using Or Purchasing, Please Contact Us In Time. We Will Give You A Satisfactory Answer..
✅Simple Installation: Easy To Install And Easy To Use, We Will Provide A Valid Description And Wiring Diagram For Your Installation. To Facilitate Your Installation..
✅Effective Card Distance: It Has A Valid Card Reading Distance Of 5 To 15 Cm. Please Check The Parameters Carefully When Placing An Order To Avoid Invalid Reading..
Features
- Professional manufacturing: High quality embedded access module RFID module. Professional manufacturing, stable performance, long service life, please rest assured to buy.
- Effective card distance: It has a valid card reading distance of 5 to 15 cm. Please check the parameters carefully when placing an order to avoid invalid reading.
- Widely applicable: This product is suitable for all 125khz cards. Wide compatibility, don't worry about selling back and not using it.
- Simple installation: Easy to install and easy to use, we will provide a valid description and wiring diagram for your installation. To facilitate your installation.
- Quality service: We are very confident in our products. If you have any questions during the process of using or purchasing, please contact us in time. We will give you a satisfactory answer.
- See more on Amazon...
Brand: Dioche | Manufacturer: Dioche
Dimensions: 0.00 x 0.00 x 0.00 Inches
See On Amazon #6
RF Demo Kit, Antenna Analyzer, Radio Frequency Test Board, RF Demo Kit RF Test Module Vector Network Analyzer Board Filter/Attenuator Module
Asin: B0BJ9MMD82
[Convenient And Portable]: Equipped With 2 Pcs Of Ufl Patch Cord For Convenient Use; The Board Is Small And Light, Suitable For Carrying With.
[Product Specification]: Rlc Series And Parallel Circuit Includes R, L, C And Combinational Circuits; Open /Short Circuit And Load Calibration Circuit; The Attenuation Circuit.
[The Filter]: Short Low Pass Filter Lpf: 30Mhz; Fm High Pass Filter Hpf: 100Mhz; Commonly Used Saw Bandpass Filter Bpf: 433Mhz; Video Ceramic Trap Bsf: 6.5Mhz.
[18 Functional Modules]: The Board Is Totally Integrated With 18 Functional Modules; Each Module Is Well Selected Of High Quality And Great Reliability.
Features
- [RF Demo Kit]: RF demo kit RF test board demo calibration board for learning vector network analyzer, antenna analyzer test calibration learning
- [18 Functional Modules]: The board is totally integrated with 18 functional modules; Each module is well selected of high quality and great reliability
- [Convenient and Portable]: Equipped with 2 pcs of UFL patch cord for convenient use; The board is small and light, suitable for carrying with
- [The Filter]: Short low pass filter LPF: 30MHz; FM high pass filter HPF: 100MHz; Commonly used SAW bandpass filter BPF: 433MHz; Video ceramic trap BSF: 6.5MHz
- [Product Specification]: RLC series and parallel circuit Includes R, L, C and combinational circuits; Open /short circuit and load calibration circuit; The attenuation circuit
- See more on Amazon...
Brand: Yosoo Health Gear | Manufacturer: Yosoo Health Gear
See On Amazon #7
DaFuRui 5Pack RC522 RFID Module RF IC Card Sensor Module with S50 White Card and Key Ring RFID Sensor Compatible for Arduino
Asin: B081YPV746 | Model: PFID | PartNumber: PFID | Ean: 0738426125402 | UPC: 738426125402
★This Module Can Be Directly Loaded Into The Various Reader Molds..
★It Is Supported Card Types: Mifare1 S50, Mifare1 S70, Mifare Ultralight, Mifare Pro, And Mifare Desfire..
★Applicable For The Users Who Need To Design Or Manufacture The Rf Card Terminal.The Development Of Access Controls, Electronic Door Locks Or Terminals For The Time Recording..
★This Rfid-Rc522 Module Is Based On The Philips Mf522-An Board And Is Delivered Together With An S50 Card, Key Ring And Two Matching Pin Strips..
Features
- 100% brand new and high quality RC522 RFID RF IC Card Sensor Module.
- This RFID-RC522 module is based on the Philips MF522-AN board and is delivered together with an S50 card, key Ring and two matching pin strips.
- This module can be directly loaded into the various reader molds.
- Applicable for the users who need to design or manufacture the RF card terminal.The development of access controls, electronic door locks or terminals for the time recording.
- It is supported card types: Mifare1 S50, Mifare1 S70, MIFARE Ultralight, Mifare Pro, and MIFARE DESFire.
- See more on Amazon...
Brand: DaFuRui | Manufacturer: DaFuRui
See On Amazon #8
AD8302 RF/IF Phase Detector Module LF-2.7G Phase Detection Impedance Analysis Module
Asin: B07RYWZ45L | Model: AD8302 | PartNumber: AD8302 | Ean: 0701069456332 | UPC: 701069456332
Supply Voltage : The Supply Voltage Of The Rf Detector Module Is 3.3V-5V, With Stable 1.8 V Reference Voltage Output, Small Envelope Brandwidth From Dc To 30 Mhz.
Wide Application : The Rf Detector Module Is Widely Used In Rf/If Pa Linearization; Precise Rf Power Control; Remote System Monitoring And Diagnostics; Return Loss/Vswr Measurements; Log Ratio Function For Ac.
Feature : The Measures Gain/Loss And Phase Up To 2.7 Ghz, Of Dual Demodulating Log Amps And Phase Detector, And Input Range -60 Dbm To 0 Dbm In A 50 Ω System.
Multi Modes : The Rf Detector Module Is Of Measurement/Controller/Level Comparator Modes, And Typical Nonlinearity < 0.5 Db, Typical Nonlinearity < 1 Degree.
Features
- Accuracy : The RF detector module is of accurate gain measurement scaling (30 mV/dB), and accurate phase measurement scaling (10 mV/Degree)
- Multi Modes : The RF detector module is of measurement/controller/level comparator modes, and typical nonlinearity < 0.5 dB, typical nonlinearity < 1 Degree
- Supply Voltage : The supply voltage of the RF detector module is 3.3V-5V, with stable 1.8 V reference voltage output, small envelope brandwidth from DC to 30 MHz
- Feature : The measures gain/loss and phase up to 2.7 GHz, of dual demodulating log amps and phase detector, and input range -60 dBm to 0 dBm in a 50 system
- Wide Application : The RF detector module is widely used in RF/IF PA Linearization; Precise RF Power Control; Remote System Monitoring and Diagnostics; Return Loss/VSWR Measurements; Log Ratio Function for AC
- See more on Amazon...
Brand: YWBL-WH | Manufacturer: YWBL-WH
Dimensions: 2.36 x 3.15 x 2.76 inches | Weight: 0.02 pounds
See On Amazon #9
RF Detector Module, Small and Compact Detector Module from 50 Hz to 3.8 GHz for Broadband Power Detection, RF Power Meter Logarithmic Detector Microwave Radio Frequency Detection Module
Asin: B0C3P8DBJS | Model: Gemerdyz43r9eb2 | PartNumber: Gemerdyz43r9eb2 | Ean: 7355777801538
【Widely Applications】Widely Used In Rf Detection, Power Measurement, Environmental Field Strength Detection, Rf Power Detector Can Also Be Used As Part Of Automatic Gain Control And Automatic Level Control. The Detector Module Is Small And Compact, Easy To Install And Use, And Has Strong Practicability..
【Excellent Material】The Rf Detector Is Made Of High Quality Circuit Board, Stable And Reliable. Can Detect The Rf Power Of Complex Modulated , Including Cdma, W‑Cdma, 8Psk, Qam And Ofdm. As A Reliable Seller, We Always Do Our Best To Provide Good Quality And Excellent Service For Our Customers..
【Advantages】The Larger The Rf Amplitude Or Power Is, The Higher The Output Voltage Is, Which Is Proportional To The Logarithm Of The Input Amplitude, Thus Enlarging The Dynamic Range Of The Detected. This Module Is Suitable For Wide‑Band Power Detection, With Flat Input And Output Response..
【Product Brief】This Logarithmic Detector Is Used For Rf Power Detection With Detection Operating Frequency 50Hz-3.8Ghz. The Detection Slope Of This Input Can Be From -52 Dbm To +8Dbm. The Detector Module Is Mainly Used To Detect Some Useful Information In Fluctuating..
Features
- Premium Quality The power meter can detect a RF of power from -52 dBm to +8dBm and convert the RF into a DC voltage output, which has passed strict quality control, you can use it with confidence. Suitable for IS95, CDMA2000, 3GPP, GSM/EDGE, MMDS and other broadband access equipment.
- Product Brief This logarithmic detector is used for RF power detection with detection Operating Frequency 50Hz-3.8GHz. The detection slope of this input can be from -52 dBm to +8dBm. The detector module is mainly used to detect some useful information in fluctuating.
- Widely Applications Widely used in RF detection, power measurement, environmental field strength detection, rf power detector can also be used as part of automatic gain control and automatic level control. The detector module is small and compact, easy to install and use, and has strong practicability.
- Advantages The larger the RF amplitude or power is, the higher the output voltage is, which is proportional to the logarithm of the input amplitude, thus enlarging the dynamic range of the detected. This module is suitable for wide band power detection, with flat input and output response.
- EXCELLENT MATERIAL The RF detector is made of high quality circuit board, stable and reliable. Can detect the RF power of complex modulated , including CDMA, W CDMA, 8PSK, QAM and OFDM. As a reliable seller, we always do our best to provide good quality and excellent service for our customers.
- See more on Amazon...
Brand: Gemer | Manufacturer: Gemer
See On Amazon #10
AD8361 RF Detector RF Microwave Real Power Detector AM Amplitude Modulation Bug Detection Module
Asin: B0785NVN1H | Model: AD8361 | PartNumber: AD8361 | Ean: 0663862491418 | UPC: 663862491418
The Operating Frequency Range Is 10Khz-2500Mhz.
The Rf Connector Of This Rf Detector Board Is Standard Sma Female.
Application Scope: Power Meter, Level Tester, Power Sampling, Test And Debugging.
The Rf Signal Is Converted Into A Voltage Output. Rf Signal Corresponding To The Amplitude Or Power Of The Output Voltage.
Features
- Adopts high quality circuit board, stable and reliable
- The RF signal is converted into a voltage output. RF signal corresponding to the amplitude or power of the output voltage
- The operating frequency range is 10KHZ-2500MHZ
- Application scope: power meter, level tester, power sampling, test and debugging
- The RF connector of this RF detector board is standard SMA female
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.02 pounds
See On Amazon #11
HiLetgo 0.1-440 MHz AD8310 RSSI High Speed High Frequency RF Output Log Detector Power Meter Board Demodulator Module 7-15V 12mA
Asin: B07X3497BZ | Model: AD8310 | PartNumber: AD8310
Detection Intercept: -108 Dbv.
Operating Voltage: 7-15V (With Lm78l05 Regulator Chip).
Dynamic Range: -77Dbm To +18 Dbm (95 Db).
Detection Slope: +24 Mv / Db.
Features
- Operating frequency: 0.1--440 MHz
- Detection slope: +24 mV / dB
- Detection intercept: -108 dBV
- Dynamic range: -77dBm to +18 dBm (95 dB)
- Operating voltage: 7-15V (with LM78L05 regulator chip)
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #12
AD8302 RF/IF Phase Detector Module LF-2.7G Phase Detection Bandwidth Module
Asin: B07KJLLG4D | Model: 9687283011 | PartNumber: 9687283011 | Ean: 0794419329851 | UPC: 794419329851
[Multi-Function]:This Phase Detector Module Remote System Monitoring And Diagnostics, Return Loss/Vswr Measurements And Log Ratio Function For Ac ..
[Input Range]:Input Range -60 Dbm To 0 Dbm In A 50 Ω System..
[Dual Demodulating]:This Is A Dual Demodulating Log Amps And Phase Detector..
[High Accuracy]:Precise Rf Power Control, Accurate Gain Measurement Scaling (30 Mv/Db), Typical Nonlinearity < 0.5 Db, Typical Nonlinearity < 1 Degree..
Features
- [2.7 GHz]:The measures gain/loss and phase up to 2.7 GHz.
- [High accuracy]:Precise RF power control, accurate gain measurement scaling (30 mV/dB), typical nonlinearity < 0.5 dB, typical nonlinearity < 1 degree.
- [Multi-function]:This phase detector module remote system monitoring and diagnostics, return Loss/VSWR measurements and log ratio function for AC .
- [Dual demodulating]:This is a dual demodulating log amps and phase detector.
- [Input range]:Input range -60 dBm to 0 dBm in a 50 system.
- See more on Amazon...
Brand: Walfront
Dimensions: 3.94 x 3.94 x 1.57 Inches | Weight: 0.02 pounds
See On Amazon #13
RF Detector, 1PC AD8361 RF Microwave Real Power Detector AM Detector Amplitude Detection, Standard SMA RF Socket
Asin: B093GHXBBX | Model: 1PC AD8361 | PartNumber: 1PC AD8361 | Ean: 9182434053409
[Frequency Range] - The Operating Frequency Range Is 10Khz-2500Mhz..
[Connector] - The Rf Connector Of This Rf Detector Board Is Standard Sma Female..
[Apply To] - Application Scope: Power Meter, Level Tester, Power Sampling, Test And Debugging..
[Function] - The Rf Is Converted Into A Voltage Output. Rf Corresponding To The Amplitude Or Power Of The Output Voltage..
Features
- [EXCELLENT MATERIAL] - The RF detector is made of high quality circuit board, stable and reliable.
- [FUNCTION] - The RF is converted into a voltage output. RF corresponding to the amplitude or power of the output voltage.
- [FREQUENCY RANGE] - The operating frequency range is 10KHZ-2500MHZ.
- [APPLY TO] - Application scope: power meter, level tester, power sampling, test and debugging.
- [CONNECTOR] - The RF connector of this RF detector board is standard SMA female.
- See more on Amazon...
Brand: Vipxyc | Manufacturer: Vipxyc
Dimensions: 0.39 x 0.39 x 0.39 Inches | Weight: 0.01 pounds
See On Amazon #14
AD8302 Amplifier Detector Module
Asin: B0B36GG9BF | Ean: 0708310204285 | UPC: 708310204285
Brand: Reland Sun | Manufacturer: RELAND SUN
See On Amazon #15
AD8302 LF-2.7G RF/IF Phase Detection Impedance Analysis Module
Asin: B0CCJQZLD3 | Model: Aatraayubcdmzre8h | PartNumber: Aatraayubcdmzre8h
Input Range -60 Dbm To 0 Dbm In A 50 Ω System.
Typical Nonlinearity < 0.5 Db, Typical Nonlinearity < 1 Degree.
Accurate Gain Measurement Scaling (30 Mv/Db).
Dual Demodulating Log Amps And Phase Detector.
Features
- Measures Gain/Loss and Phase up to 2.7 GHz
- Dual Demodulating Log Amps and Phase Detector
- Input Range -60 dBm to 0 dBm in a 50 System
- Accurate Gain Measurement Scaling (30 mV/dB)
- Typical Nonlinearity < 0.5 dB, Typical Nonlinearity < 1 Degree
- See more on Amazon...
Brand: Aatraay | Manufacturer: Aatraay
See On Amazon #16
RF Detector Module, 0.1-3200MHz Discharge Board High Sensitivity Envelope Demodulator Module
Asin: B08CY4P7LH
▶Made Of High-Quality Materials, This Rf Power Detector Adopts Fine Workmanship, Which Is With High Practicality..
▶By Accurancy Craft By Many Experts, Such A Discharge Detector Is Entitled With High Performance According To Strict Rule..
▶Via Strict Quality Control And Quality Assurance, Discharge Detector Is Improved For More Practicality..
▶With -30Dbm--40Dbm High Sensitivity, This Discharge Module Keeps 0.1--3200Mhz Working Frequency..
Features
- Service life can be increased by printed circuit board material, discharge module's quality is guaranteed.
- With -30dBm--40dBm high sensitivity, this discharge module keeps 0.1--3200MHz working frequency.
- Made of high-quality materials, this RF power detector adopts fine workmanship, which is with high practicality.
- Via strict quality control and quality assurance, discharge detector is improved for more practicality.
- By accurancy craft by many experts, such a discharge detector is entitled with high performance according to strict rule.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.01 pounds
See On Amazon #17
1Pc Ad8361 Rf Microwave Real Power Detector RF Detector Rivelatore Am Power Detector Am Detector Amplitude Detection
Asin: B0CPC51KFC | Model: WALFRONT82gb56sy7c | PartNumber: WALFRONT82gb56sy7c
The Rf Is Converted Into A Voltage Output. Rf Corresponding To The Amplitude Or Power Of The Output Voltage.
The Rf Connector Of This Rf Detector Board Is Standard Sma Female.
Application Scope: Power Meter, Tester, Power Sampling, Test And Debugging.
The Operating Frequency Range Is 10Khz-2500Mhz.
Features
- Adopts circuit board, stable and reliable
- The operating frequency range is 10KHZ-2500MHZ
- The RF is converted into a voltage output. RF corresponding to the amplitude or power of the output voltage
- Application scope: power meter, tester, power sampling, test and debugging
- The RF connector of this RF detector board is standard SMA female
- See more on Amazon...
Brand: Walfront | Manufacturer: WALFRONT
See On Amazon #18
High Sensitivity RF Detector Module for AM 0.1 to 3200MHz, Envelope Demodulation with Discharge Board
Asin: B0CSXM5RWH | Model: Fafeicyhp1gg9ict6 | PartNumber: Fafeicyhp1gg9ict6
[Expert Craftsmanship] Crafted With Accuracy By Industry Experts, This Discharge Detector Delivers High Performance And Reliability According To Strict Standards..
[Ultra-High Sensitivity] With A Sensitivity Range Of -30Dbm To -40Dbm, This Discharge Module Allows For Precise Detection Within The 0.1-3200Mhz Frequency Range..
[Longer Service Life] The Printed Circuit Board Material Increases The Service Life Of This Rf Detector Module, Ensuring Its Quality And Durability..
[ Materials] Made Using Materials And Fine Workmanship, This Rf Power Detector Exhibits Excellent Practicality And Long-Lasting Performance..
Features
- [Enhanced Practicality] Through strict quality control and assurance, the discharge detector has been improved for enhanced practicality and reliable performance.
- [ Materials] Made using materials and fine workmanship, this RF power detector exhibits excellent practicality and long-lasting performance.
- [Expert Craftsmanship] Crafted with accuracy by industry experts, this discharge detector delivers high performance and reliability according to strict standards.
- [Longer Service Life] The printed circuit board material increases the service life of this RF detector module, ensuring its quality and durability.
- [Ultra-high Sensitivity] With a sensitivity range of -30dBm to -40dBm, this discharge module allows for precise detection within the 0.1-3200MHz frequency range.
- See more on Amazon...
Brand: Fafeicy | Manufacturer: Fafeicy
See On Amazon #19
1 Open 8 RF Switch Module, HMC253 RF Switch Module, 1 Open 8 RF Switch Module, DC 2.5GHZ RF Switch Module for RF Switch Board Radio, Tools
Asin: B0CC2X5BZH | Model: Hyuduot01hdwg5xq | PartNumber: Hyuduot01hdwg5xq
The Module Has A Large Heat Dissipation Area, Which Can Better Maintain Long-Term Operation..
We Strive To Provide You With The Highest Quality Product And The Best Customer Experience, If You're Not Entirely Satisfied, Please Just Feel To Contact Us At Any Time..
Can Be Used For Catv, Dbs, Mmds And Lan As Well As Test Equipment..
This Rf Switch Module Can Be Used In Catv, Dbs, Mmds And Local Area Network And Test Equipment, With Diverse Usage Scenarios And Simple Usage..
Features
- This RF switch module can be used for CATV, DBS, MMDS and LAN as well as test equipment.
- This RF switch module can be used in CATV, DBS, MMDS and local area network and test equipment, with diverse usage scenarios and simple usage.
- The module has a large heat dissipation area, which can better maintain long-term operation.
- Can be used for CATV, DBS, MMDS and LAN as well as test equipment.
- We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel to contact us at any time.
- See more on Amazon...
Brand: Hyuduo | Manufacturer: Hyuduo
See On Amazon
Looking For Something Else?
Search