Fender Flares Wheel Edge Trim Automotive 32Foot T-Style Rubber Fender Flare Edge Sealing Strip(Self-Adhesive) for Car Truck RV Wheel Wells, Fender Flares Wheel Eyebrow Protector
Asin: B0B6FVNPHP | Model: GW-#76 BLACK | PartNumber: GW-#76 BLACK | Ean: 0768617350542 | UPC: 768617350542
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Self-Adhesive】Installation Process Is Quick And Requires No Cutting Or Drilling The Back Of The Trim Comes With A Strong Adhesive Backing, Which Can Be Installed As Soon As It Is Torn Off Without Peeling Off The Adhesive, Leaving No Sticky Residue And A Good Seal. To Install The Ground Firmly, First Clean The Dirt And Mud From The Fender With A Damp Towel. Then Dry The Water Stains With A Dry Towel. Then Install The Decorative Sticker Onto The Fender..
【Contact Us】Please Let Us Know That If You Have Any Problem With Our Product, And We Will Respond Within 24 Hours. We Guarantee 100% Refund Or Re-Send For Each Defective Fender Trim You Receive!.
【Application】This Fender Trim Can Be Used For Cars, Trucks, Rvs, Off-Road Vehicles And More. The Performance Is Also Very Strong, It Can Prevent The Car Exterior From Being Scratched, Protect The Paint, And Also Make The Car Look More Elegant And Attractive Without Causing Any Damage To The Surface..
【High-Quality Material】This Fender Edge Trim Is Made Of Epdm Rubber Material, Non-Toxic Flexible And Resilient. The Trim Is Installed On The Outside Of The Body, Which Requires A Material That Is Heat And Cold Resistant, Uv Resistant, And Ozone Resistant, While The Material Is Also Very Soft And Flexible And Can Be Installed On A Variety Of Edges And Corners..
Features
- PROTECT YOUR CAR This fender trim strip is installed between the fender and the body of the car to create a strong barrier between the fender and the body. It prevents damage caused by road debris, mud and rust, isolates vibration, reduces friction, protects the paint and eliminates the risk of rocks and debris being trapped between the fender and the body, while also providing an attractive appearance to your vehicle.
- HIGH-QUALITY MATERIAL This fender edge trim is made of EPDM rubber material, non-toxic flexible and resilient. The trim is installed on the outside of the body, which requires a material that is heat and cold resistant, UV resistant, and ozone resistant, while the material is also very soft and flexible and can be installed on a variety of edges and corners.
- SELF-ADHESIVE Installation process is quick and requires no cutting or drilling The back of the trim comes with a strong adhesive backing, which can be installed as soon as it is torn off without peeling off the adhesive, leaving no sticky residue and a good seal. To install the ground firmly, first clean the dirt and mud from the fender with a damp towel. Then dry the water stains with a dry towel. Then install the decorative sticker onto the fender.
- APPLICATION This fender trim can be used for cars, trucks, RVs, off-road vehicles and more. The performance is also very strong, it can prevent the car exterior from being scratched, protect the paint, and also make the car look more elegant and attractive without causing any damage to the surface.
- CONTACT US Please let us know that if you have any problem with our product, and we will respond within 24 hours. We guarantee 100% REFUND or RE-SEND for each defective Fender Trim you receive!
- See more on Amazon...
Brand: GoldWheel | Manufacturer: GoldWheel
Dimensions: 3.00 x 1.00 x 2.00 inches
Warranty: Warranty within 90 days from purchase
See On Amazon Similar To Fender Flares Wheel Edge Trim
#1
GOOACC GRC-70 35PCS Engine Under Cover Splash Shield Guard Body Bolts Bumper Fender Liner Push Retainer Fastener Rivet Clips , black
Asin: B07TKB45PP | Model: GRC-70 | PartNumber: GRC-70 | Ean: 0767912576855 | UPC: 767912576855
The Clips Are Widely Used For Radiator Yoke Trim Panel Door Trim Door Panel Bumper Car Fender Flare Side Skirt Grille Wheel Well Air Intake Engine Cover Mud Flap And Splash Guard Shield Retainers Rivet Clips Replacement.
Package Includes 10Pcs Extruded U-Nuts - Replace/Fix To The Bumper(Corrosion Resistant) 15Pcs Body Bolts With Built-In Fender Washer (Corrosion Resistant) 10Pcs Plastic Push Clips As Pictured.
Fits Infiniti G35 G37 Fx35 Fx45 Ex35 Nissan 370Z 350Z (See Details).
The Extruded U-Nuts Can Be Used To Replace/Fix To The Bumper.
Features
- Brand New Engine Splash Shield Bolts Hardware Kit Fender Bumper Clips Rivets direct replacement and perfect fitment.Fit Type: Universal
- The extruded U-nuts can be used to replace/fix to the bumper
- The clips are widely used for radiator yoke trim panel door trim door panel bumper car fender flare side skirt grille wheel well air intake engine cover mud flap and splash guard shield retainers rivet clips replacement
- Fits Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z (see details)
- Package includes 10pcs Extruded U-nuts - Replace/Fix to the Bumper(CORROSION RESISTANT) 15pcs Body Bolts with Built-in Fender Washer (CORROSION RESISTANT) 10pcs Plastic Push Clips as pictured
- See more on Amazon...
Brand: GOOACC | Manufacturer: GOOACC
Dimensions: 4.61 x 1.30 x 3.66 Inches | Weight: 0.40 pounds
Warranty: 2 Years Warranty
See On Amazon #2
GOOACC 150 pcs Push-Type Bumper Fasteners Rivet Clips-2 Sizes Universal Auto Clips & Fastener for Bumper Fender Clips Replacement-Fastener Removal Tool Included (150PCS Clip)
Asin: B07FVKLYP1 | Model: GRC-31 | PartNumber: GRC-31 | Ean: 0812227030773 | UPC: 812227030773
Application: Widely Used For Door Trim, Fender, Bumper, Radiator Shield Yoke, Side Skirt, Grille, Engine Cover And Splash Shield Retainers.Better Than Other Clips.
Package Included: 100 Pcs Universal 8 Mm Push-Type Plastic Clips,50 Pcs 10Mm Nylon Bumper Fender Flare Fastener,1 Pcs 5-Inch Fastener Remover..
Sizes: One Is Measured Head Dia: 20Mm; Stem Length: 22.8Mm; Fits Into: 8Mm Hole. The Other :Head Dia: 20Mm; Stem Length: 16 Mm; Fits: 10Mm Hole.
Tough Fastener Remover- Durable Plastic And Metal Material That Has Advantage Of High Abrasion Resistance,Allow You To Quickly And Easily Remove Car Door Panel And Upholstery Clips Without Causing Damage To Them..
Features
- IMPACT RESISTANT PUSH RIVETS - Well made of durable Nylon plastic, not easy to break or crack like other brands, it is super sturdy!
- TOUGH FASTENER REMOVER- Durable Plastic and Metal material that has advantage of high abrasion resistance,allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them.
- APPLICATION: Widely used for door trim, fender, bumper, radiator shield yoke, side skirt, grille, engine cover and splash shield retainers.Better than other clips
- SIZES: One is measured Head Dia: 20mm; Stem Length: 22.8mm; Fits Into: 8mm hole. The other :Head Dia: 20mm; Stem length: 16 mm; fits: 10mm hole
- PACKAGE INCLUDED: 100 pcs universal 8 MM push-type plastic clips,50 pcs 10mm Nylon Bumper Fender Flare Fastener,1 pcs 5-inch Fastener Remover.
- See more on Amazon...
Brand: GOOACC | Manufacturer: GOOACC
Dimensions: 0.30 x 2.00 x 2.00 Inches
Warranty: 2 Years Warranty
See On Amazon #3
GOOACC GRC-30 120PCS Car Retainer 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips, 1PC Fastener Remover
Asin: B07FV5ZJL3 | Model: GRC-30 | PartNumber: GRC-30 | Ean: 0812227030766 | UPC: 812227030766
Great Material - These Bumper Clips Are Made Of High-Quality Black Nylon Material, Anti-Wear And Anti-Corrosion, Would Not Break Or Crack Easily During Use..
Package Included:120Pcs 6.3Mm 8Mm 9Mm 10Mm Bumper Push Rivet Clips,1Pc Fastener Remover.
Widely Application - These Push Clips Are Widely Used For Trim Panel Clips, Door Trim Clips, Door Panel Clips, Bumper Clips, Fender Clips, Engine Cover And Splash Shield Retainers Replacement. It Always Covers Some Applications Include Telecom Equipment, Motor Vehicles, Domestic Appliances, Furniture And Electrical Equipment..
6 Different Push Pin Rivet For Many Brand Vehicles..
Features
- 4 Hole sizes from 6.3Mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ).
- 6 different Push pin rivet for many brand vehicles.
- Great material - these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.
- Widely application - these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
- PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover
- See more on Amazon...
Brand: GOOACC | Manufacturer: GOOACC
Dimensions: 0.70 x 5.00 x 5.00 inches | Weight: 0.65 Pounds
Warranty: 2 years Warranty
See On Amazon #4
Zlirfy 35PCS Engine Under Cover Splash Shield Guard Body Bolts Screws,Bumper Fender Liner Push Retainer Fastener Rivet Clips,Bumper Clips Extruded U-Nuts Kit,Replacement for G35 G37 FX35 FX45
Asin: B0C6XG1595 | Model: 551JGFHLS001 | PartNumber: 551JGFHLS001
[Compatible Models] G35 Sedan From 2003 To 2008; 2003-2007 G35 Sports Car; 2008-2014 G37 And G37x; 2003-2008 Fx35&Fx45; 2008-2012 Ex35; 370Z From 2009 To 2014, 350Z From 2003 To 2009..
[Essential] Universal Body Bolts Suitable For Cars, Including Screws And Fasteners For Installing The Lower Hood On The Car. If You Have An Old Car With Fragile And Rusty Clips, This Is A Must-Have..
[Widely Used] This Hood Hardware Kit Can Be Used For Door Trims, Door Panels, Trim Panels, Radiator Yokes, Bumpers, Car Fender Horns, Side Skirts, Grilles, Wheel Cabins, Air Intakes, Engine Hoods, Mudguards, And Fender Retainer Rivet Clips..
[Durable Materials]The Body Bolts Of The Engine Lower Cover Mudguard Are Made Of High Hardness Steel Or High-Quality Nylon Material, Which Is Resistant To Strong Impact And High-Pressure Wear. It Can Resist Factors Such As Road Salt, Water, And Dirt..
Features
- [Package Includes]The car clip kit includes 10 extruded U-nuts, 15 body bolts with built-in fender washers, and 10 plastic push clips. Sufficient quantity to meet your daily replacement needs.
- [Durable Materials]The body bolts of the engine lower cover mudguard are made of high hardness steel or high-quality nylon material, which is resistant to strong impact and high-pressure wear. It can resist factors such as road salt, water, and dirt.
- [Compatible Models] G35 sedan from 2003 to 2008; 2003-2007 G35 sports car; 2008-2014 G37 and G37X; 2003-2008 FX35&FX45; 2008-2012 EX35; 370Z from 2009 to 2014, 350Z from 2003 to 2009.
- [Widely Used] This hood hardware kit can be used for door trims, door panels, trim panels, radiator yokes, bumpers, car fender horns, side skirts, grilles, wheel cabins, air intakes, engine hoods, mudguards, and fender retainer rivet clips.
- [Essential] Universal body bolts suitable for cars, including screws and fasteners for installing the lower hood on the car. If you have an old car with fragile and rusty clips, this is a must-have.
- See more on Amazon...
Brand: Zlirfy | Manufacturer: Zlirfy
Dimensions: 0.39 x 0.39 x 0.39 inches
See On Amazon #5
Edge Trim Black Large, Fits Edge 1/4 Inch, Length 10 Feet (3.05 Meter)
Asin: B00KGAKG2G | Model: HM-00920 | PartNumber: HM-00920 | Ean: 7701101240120
Permanent Grip: The Internal Metal Clips On This Edge Trim Are Designed For Permanent Installation. With The U-Shaped Clamp And Internal Clipping, Your Car Door Or Window Trim Will Stay In Place For Years To Come, So You Can Continue To Drive And Park With The Utmost Confidence..
Highly Flexible: Our Metal Corner Protectors Are Very Flexible For Easy Molding Onto More Complex Shapes. Whether Tackling Your Car Door, Boot, Windows, Or Any Part Of Your Boat's Edges, You Can Trust That The Process Will Be Easy Enough, With The Edge Trim Bending But Never Breaking..
Easy Install / No Glue: You Can Fit This Edging Strip To Your Sedan, Suv, Mpv, And Most Car Models Easily, Without The Need For Any Adhesive. Simply Fix It In Place To Enjoy The Protective Benefits, Along With The Decorative Qualities Of The Seal, Without Having To Mess Around With Glue Guns..
High-Quality Make & Materials: At M M Seals We Use High-Quality Materials And Are Proud Of Our Strong Manufacturing Process. With The Special U-Shaped Grip On This Premium Material, You’Ll Get A Long-Lasting Protective Black Edge For Sharp Metal Edges, Keeping Your Vehicles In Top Form..
Features
- PROTECT YOUR EDGES: With this edging strip you can protect metal edges on your car, boat, and more. Whether using it as a car boot protector or a car door edge protector, you can rely on this to keep sharp corners safe from the dangers of scratches.
- HIGH-QUALITY MAKE & MATERIALS: At M M SEALS we use high-quality materials and are proud of our strong manufacturing process. With the special U-shaped grip on this premium material, you ll get a long-lasting protective black edge for sharp metal edges, keeping your vehicles in top form.
- PERMANENT GRIP: The internal metal clips on this edge trim are designed for permanent installation. With the U-shaped clamp and internal clipping, your car door or window trim will stay in place for years to come, so you can continue to drive and park with the utmost confidence.
- EASY INSTALL / NO GLUE: You can fit this edging strip to your sedan, SUV, MPV, and most car models easily, without the need for any adhesive. Simply fix it in place to enjoy the protective benefits, along with the decorative qualities of the seal, without having to mess around with glue guns.
- HIGHLY FLEXIBLE: Our metal corner protectors are very flexible for easy molding onto more complex shapes. Whether tackling your car door, boot, windows, or any part of your boat's edges, you can trust that the process will be easy enough, with the edge trim bending but never breaking.
- See more on Amazon...
Brand: Seal Rubber | Manufacturer: Seal Rubber
Dimensions: 0.04 x 120.00 x 0.20 inches | Weight: 0.77 pounds
See On Amazon #6
Edge Trim Black Small, Fits Edge 1/16 to 1/8 Inch, Length 10 Feet (3.05 Meter)
Asin: B00M8MAOLI | Ean: 7701101240106
High-Quality Make & Materials: At M M Seals We Use High-Quality Materials And Are Proud Of Our Strong Manufacturing Process. With The Special U-Shaped Grip On This Premium Material, You’Ll Get A Long-Lasting Protective Black Edge For Sharp Metal Edges, Keeping Your Equipment And Home Furniture In Top Form..
Easy Install / No Glue: You Can Fit This Edging Strip To Your Car, Equipment, And Home Furniture Easily, Without The Need For Any Adhesive. Simply Fix It In Place To Enjoy The Protective Benefits, Along With The Decorative Qualities Of The Seal, Without Having To Mess Around With Glue Guns..
Permanent Grip: The Internal Metal Clips On This Edge Trim Are Designed For Permanent Installation. With The U-Shaped Clamp And Internal Clipping, Your Rubber Edge Trim Will Stay In Place For Years To Come..
Protect Yourself: With This Sheet Metal Edge Protector, You Can Protect Yourself, Your Family, And Your Pets From Injuries Resulting From Sharp Metal Edges In Your Home, Garden, Or Your Car And More. Whether Using It As A Metal Edge Protector Or Cover For Sharp Metals, You Can Rely On This To Keep Safe From Dangers And Scratches..
Features
- PROTECT YOUR EDGES: With this Edge guard, you can protect metal edges on your home, car, or boat from scratches.
- PROTECT YOURSELF: With this sheet metal edge protector, you can protect yourself, your family, and your pets from injuries resulting from sharp metal edges in your home, garden, or your car and more. Whether using it as a metal edge protector or cover for sharp metals, you can rely on this to keep safe from dangers and scratches.
- HIGH-QUALITY MAKE & MATERIALS: At M M SEALS we use high-quality materials and are proud of our strong manufacturing process. With the special U-shaped grip on this premium material, you ll get a long-lasting protective black edge for sharp metal edges, keeping your equipment and home furniture in top form.
- PERMANENT GRIP: The internal metal clips on this edge trim are designed for permanent installation. With the U-shaped clamp and internal clipping, your rubber edge trim will stay in place for years to come.
- EASY INSTALL / NO GLUE: You can fit this edging strip to your car, equipment, and home furniture easily, without the need for any adhesive. Simply fix it in place to enjoy the protective benefits, along with the decorative qualities of the seal, without having to mess around with glue guns.
- See more on Amazon...
Brand: Seal Rubber | Manufacturer: Seal Rubber
Dimensions: 0.04 x 0.13 x 120.00 inches
See On Amazon #7
GOOACC 100PCS Nylon Bumper Fastener Rivet Clips 8mm Replacement for GM #21030249, Ford #N807389S VW Auto Push Pin Rivets Automotive Furniture Assembly Expansion Screws Kit
Asin: B0040CYWX0 | Model: GRC-13 | PartNumber: GRC-13 | Ean: 0760960916246 | UPC: 760960916246
Push-Type Design - Push In Type, Rivet Post Pressure Expands Legs For Fast And Tight Fastening. Easy To Fasten Bumper Fender Flare And Mud Flap. Better Replacement For Original Bumper And Fender Clips..
Package Include: 100Pcs Fastener Rivet Clips.
Multiple Use - Come With 100 Pcs Car Fender Clips That Widely Used For Door Trim, Radiator Shield Yoke, Fender, Bumper, Side Skirt, Grille, Engine Cover And Splash Shield Retainers Rivet Clips For Exact Replacement Of Worn, Old, And Broken Retainers..
One Size Fits Most - Head Diameter: 20Mm/ 0.8 Inches; Stem Length: 22.8Mm/0.9 Inches; Fits Into: 8Mm /0.3 Inches Hole. These Universal Push-Type Fastener Clips Will Fit On Most Of Auto Parts With 8Mm Hole, Hold Your Parts Very Tightly..
Features
- Great Material - These bumper clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use.
- One Size Fits Most - Head Diameter: 20mm/ 0.8 inches; Stem Length: 22.8mm/0.9 inches; Fits Into: 8mm /0.3 inches hole. These universal push-type fastener clips will fit on most of auto parts with 8mm hole, hold your parts very tightly.
- Push-type Design - Push in type, rivet post pressure expands legs for fast and tight fastening. easy to fasten Bumper Fender Flare and Mud Flap. Better replacement for original bumper and fender clips.
- Multiple Use - Come with 100 pcs car fender clips that widely used for door trim, radiator shield yoke, fender, bumper, side skirt, grille, engine cover and splash shield retainers rivet clips for exact replacement of worn, old, and broken retainers.
- PACKAGE INCLUDE: 100PCS Fastener Rivet Clips
- See more on Amazon...
First Available: 02/20/2018
Brand: GOOACC | Manufacturer: GOOACC
Dimensions: 3.00 x 5.00 x 0.30 inches | Weight: 0.10 pounds
Warranty: 2 Years Warranty
See On Amazon #8
GOOACC Nylon Bumper Fastener Rivet Clips Fender& Bumper Shield Retainer for GM, Ford & Chrysler 7mm Hole Retainer Auto Body Clips - 100PCS
Asin: B0017UBHQS | Model: GRC-10 | PartNumber: GRC-10 | Ean: 0781621091652, 0760960916284 | UPC: 760960916284, 781621091652
Widely Application - Theses Push Clips Are Widely Used For Trim Panel Clips, Door Trim Clips, Door Panel Clips, Bumper Clips, Fender Clips, Engine Cover And Splash Shield Retainers Replacement. It Always Covers Some Applications Include Telecom Equipment, Motor Vehicles, Domestic Appliances, Furniture And Electrical Equipment..
Package Include: 100Pcs Fender& Bumper Shield Retainer.
Gm #1605396, 1595864; Chrysler 6030441; Ford 388577S, W705589-S300.
Universal Plastic Clip - 7Mm (1/4") Hole Size; .095" - .540" Panel Range Universal Push Clip.
Features
- Great Material - These bumper clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use..Material:plastic
- Universal Plastic Clip - 7mm (1/4) Hole Size; .095 - .540 Panel Range Universal Push Clip
- WIDELY APPLICATION - Theses push clips are widely used for trim panel clips, door trim clips, door panel clips, bumper clips, Fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
- GM #1605396, 1595864; Chrysler 6030441; Ford 388577S, W705589-S300
- PACKAGE INCLUDE: 100PCS Fender& Bumper Shield Retainer
- See more on Amazon...
Brand: GOOACC | Manufacturer: GOOACC
Dimensions: 0.20 x 0.80 x 0.88 inches | Weight: 0.10 pounds
Warranty: 2 Years Warranty
See On Amazon #9
Door Edge Guards Car Door Edge Guards 32Ft(10M) U Shape Car Door Protector Rubber Seal Door Guard Internal Double Sided Tape (No Glue Required), Black
Asin: B06ZZDF85V | Model: A01 | PartNumber: A01 | Ean: 3879401810917
The Way To Use - Sticky Double-Sided Adhesive Tape Keeps The Strip At The Door Edge Securely (Use With Primer Would Be Better), The Sticky Part Of The Strip Should Go On Inside Of The Door Edge. Convenient For Diy Installing And Removing, Less Than 20 Min. Our Car Door Protector Designs Invisible For Your Car Protection..
Attention - If The Adhesive Cannot Be Firmly Attached, You Should First Wipe The Area To Be Attached With A Damp Towel And Air Dry It Before Applying It. While Applying, Press Lightly To Make The Adhesive More Snug To The Area To Be Attached. Please Be Careful Not To Let It Go Into The Water Within 24 Hours After Applying It..
Just Take Care Of Your Car Now - Act As A Door Guard Against Nicks And Dings, It Look Good. For Your Car Offering A Literal Line Of Defense To Keep The Paint There Looking As Good As The Day It Was First Applied And Preserving The Integrity Of The Metal Beneath..
Keep Door Edge Well Protected - Vehicle Car Door Edge Guards Protects Each Door Edge And Help Maintain The Vehicles Condition By Preventing Door Dings, Dents (When Open The Door), Chipping Paint And Rust. Protect Your Car Vehicle Paint Protection Doesn't Have To Involve The Entire Car From Front To Back..
Features
- Fully Easy to Install - These door edge guards will protect your vehicle from nicks, chips & scratches.They install easily with no tools. They are U channel design and fit easily over any door edge. Our car door protector works best for door edge thickness up to 5 mm (0.2"). Attention to truck/van owners, please ensure your car door edge thickness prior to purchase.
- Keep Door Edge Well Protected - Vehicle car door edge guards protects each door edge and help maintain the vehicles condition by preventing door dings, dents (when open the door), chipping paint and rust. Protect Your Car Vehicle paint protection doesn't have to involve the entire car from front to back.
- The Way to Use - Sticky double-sided adhesive tape keeps the strip at the door edge securely (use with primer would be better), the sticky part of the strip should go on INSIDE of the door edge. Convenient for DIY installing and removing, less than 20 min. Our car door protector designs Invisible for your car protection.
- Just Take Care of Your Car Now - Act as a door guard against nicks and dings, it look good. For your car offering a literal line of defense to keep the paint there looking as good as the day it was first applied and preserving the integrity of the metal beneath.
- Attention - If the adhesive cannot be firmly attached, you should first wipe the area to be attached with a damp towel and air dry it before applying it. While applying, press lightly to make the adhesive more snug to the area to be attached. Please be careful not to let it go into the water within 24 hours after applying it.
- See more on Amazon...
Brand: Besteek Home | Manufacturer: Besteek Home
See On Amazon #10
Rubber Edge Trim, 1/16" Self Adhesive Flexible U Channel Edge Protecter for Sheet Metal, Car Doors, U Shaped Sharp Edge Protecter, Fit for 1-3/32" Width Edge, Black Color, 10Ft, EPDM Material
Asin: B0CQLC4P4S | Model: 1/16-10-B-G | PartNumber: 1/16-10-B-G
Easy To Cut And Bend: This Rubber Edge Trim Can Be Easily Cut With Scissors And Is Flexible Enough To Bend Into Tight Corners And Complex Angles, Perfect For Curved Edges As Well As Straight Edges..
Widely Application: The Trim's Slot Wide 1/16", Can Used To Cover The Edge Thick From 0 To 3/32"; Such As Car Doors, Cabinets, Steel Boxes, Steel Tiles, Cages..
Easy To Install And Remove: Self Adhesive Edge Trim, Can Be Installed Directly Without Glue; The Glue On The Edge Trim Is Easy To Remove And Does Not Corrode The Product, No Marks Will Remain On The Product After Removing The Edge Trim..
High Quality Adhesive: The Glue We Use Is High-Quality Glue With High Strength, Not Easy To Fall Off, And Not Easy To Oxidize Outdoors..
Features
- EPDM Rubber Material: EPDM dense rubber, durable and not easy to age, extremely hard wearing and washable. Compare to other's PVC material edge trim, EPDM material edge trim is not easily broken down by ultraviolet light and ozone, has better thermal stability, radiation resistance and weather resistance.
- High Quality Adhesive: The glue we use is high-quality glue with high strength, not easy to fall off, and not easy to oxidize outdoors.
- Easy to Cut and Bend: This rubber edge trim can be easily cut with scissors and is flexible enough to bend into tight corners and complex angles, Perfect for curved edges as well as straight edges.
- Easy to Install and Remove: Self adhesive edge trim, can be installed directly without glue; The glue on the edge trim is easy to remove and does not corrode the product, no marks will remain on the product after removing the edge trim.
- Widely Application: The trim's slot wide 1/16, can used to cover the edge thick from 0 to 3/32; Such as car doors, cabinets, steel boxes, steel tiles, cages.
- See more on Amazon...
Brand: YANRUIPRO | Manufacturer: YANRUI
Dimensions: 0.40 x 120.00 x 0.19 inches
See On Amazon #11
Nilight - CL-86 635Pcs Car Push Retainer Clips-16 Most Popular Sizes Nylon Bumper Fender Rivets Kit with 10 Cable Ties and Fasteners Remover for Toyota GM Ford Honda Acura Chrysler
Asin: B087NC9ZGN | Model: CL-86 | PartNumber: CL-86 | Ean: 0781621092871 | UPC: 781621092871
Prefect For What You Need: - Up To 620 Pieces Of Retainer Clips In A Plastic Box, Allows To Freely Diy Your Vehicle Accessories At Anytime You Wanted. It Is Definitely Cheaper Than Going To The Auto Parts Store..
Bonus Accessories: - We Provide Different Size Fastener Removers And Cable Ties To Help You Quickly And Easily Remove Car Door Panel And Upholstery Clips Without Causing Damage To Them. Easy Access Into Confined Areas..
Top Quality: - These Car Retainer Clips Are Made Of High-Quality Black Nylon Material, Anti-Wear And Anti-Corrosion, Would Not Break Or Crack Easily During Use..
Features
- UNIVERSAL FIT KIT: - Great assortment push retainer kit with 16 most popular size, fitting for door trim, radiator shield yoke, fender, bumper, side skirt, grille, engine cover and splash shield retainers replacement,compatible with Ford, GM, Chrysler, Toyota, Honda and more. All packed in a plastic container for easy organization and storage.
- TOP QUALITY: - These car retainer clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use.
- PREFECT FOR WHAT YOU NEED: - Up to 620 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted. It is definitely cheaper than going to the auto parts store.
- BONUS ACCESSORIES: - We provide different size fastener removers and cable ties to help you quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access into confined areas.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 7.00 x 6.00 x 6.00 inches
Warranty: 2 Years Warranty
See On Amazon #12
Cowles - Superior 18ft Black U-Channel Edge Guard Trim, Rubber Bumper Protector Accessory, Door Guard for Cars, Trucks, SUVs, ATVs, Boats
Asin: B001EA0LJK | Model: T5602 | PartNumber: T5602 | Ean: 0085387056024, 7258006709035 | UPC: 085387056024
Versatile Protection For Various Areas: Our Car Door Edge Trim Is Not Limited To Protecting Only The Doors. It Can Also Be Effectively Used To Safeguard The Edges Of Hoods And Trunks From Chips And Nicks That May Lead To Rust Over Time. Give Your Entire Vehicle The Protection It Deserves..
Universal Fit For All Vehicles: Cowles Products' Car Door Edge Guard Trim Is Designed To Have A Universal Fit, Making It Compatible With Almost All Types Of Vehicles. Whether You Have A Car, Truck, Suv, Or Any Other Vehicle, Our Trim Will Provide The Protection You Need Without Compromising On Quality Or Style..
Easy Installation And Customizable Length: Installing Our Door Edge Guard Trim Is A Breeze. It Is Designed To Be Easily Installed By Anyone. Additionally, The Trim Is Flexible Around Edges, Allowing For A Seamless Fit. You Can Also Trim Or Cut It To Your Desired Length, Ensuring A Perfect Fit For Your Specific Vehicle..
Enhance The Look Of Your Vehicle: Choose From Our Wide Range Of Options, Including Black Door Edge Guard, Carbon Fiber Style Car Door Protectors, Or Chrome Door Edge Trim. These Stylish Choices Not Only Safeguard Your Car, Truck, Or Suv But Also Add An Aesthetic Appeal To Your Vehicle's Appearance..
Features
- Premium Car Door Edge Guard Trim: Cowles Products offers high-quality car door edge guard trim that provides superior protection for your vehicle. Say goodbye to cracks and hello to durable door protection that stays in place, thanks to the reliable automotive grade hot melt glue adhesives.
- Enhance the Look of Your Vehicle: Choose from our wide range of options, including black door edge guard, carbon fiber style car door protectors, or chrome door edge trim. These stylish choices not only safeguard your car, truck, or SUV but also add an aesthetic appeal to your vehicle's appearance.
- Versatile Protection for Various Areas: Our car door edge trim is not limited to protecting only the doors. It can also be effectively used to safeguard the edges of hoods and trunks from chips and nicks that may lead to rust over time. Give your entire vehicle the protection it deserves.
- Easy Installation and Customizable Length: Installing our door edge guard trim is a breeze. It is designed to be easily installed by anyone. Additionally, the trim is flexible around edges, allowing for a seamless fit. You can also trim or cut it to your desired length, ensuring a perfect fit for your specific vehicle.
- Universal Fit for All Vehicles: Cowles Products' Car Door Edge Guard Trim is designed to have a universal fit, making it compatible with almost all types of vehicles. Whether you have a car, truck, SUV, or any other vehicle, our trim will provide the protection you need without compromising on quality or style.
- See more on Amazon...
Brand: Cowles | Manufacturer: Cowles Products
Dimensions: 1.30 x 10.00 x 9.30 inches | Weight: 0.00 pounds
See On Amazon #13
8Pcs Engine Lower Cover Pin Screws, 6PCS Radiator Access Cilps 90674-TY2-A01 and 2PCS Lower Engine Cover Bolt 90105-TBA-A00 Compatible with Honda Civic Accord CRV
Asin: B0C455MBX3
[Scope Of Application]: The Radiator Access Cilps And Bolts Are Compatible With Honda Civic 2017-2020, Crv 2017-2020, Accord 2014-2020. Please Check The Size Of The Corresponding Component Model Of Your Car Before Buying To Avoid The Wrong Purchase..
[Easy To Use]: Use Bolts To Fix The Oil Pan Drain Plug Access Cover To Its Installation Point, Will Not Easily Fall Off..
[Lower Engine Shield Cover Bolt Kit Function]:The Engine Cover Screws Are Used For Undercarriage Skid Plate Or Oil Pan Slid Plate, Promptly Replace Old Or Damaged Screws And Bolts..
[Pack List And Oem]: Package Include 6 Pieces Of Lower Engine Cover Pin Screws 90674-Ty2-A01 And 2 Pieces Of Radiator Support Splash Guard Bolts 90105-Tba-A00..
Features
- [High Quality Material]: The Engine Access Cover Pin adopts high quality Aluminum Alloy, rust proof, corrosion resistance, not easy to break or deformation, stable performance, good reliability, durable.
- [Pack list and OEM]: Package include 6 pieces of lower engine cover pin screws 90674-TY2-A01 and 2 pieces of radiator support splash guard bolts 90105-TBA-A00.
- [Scope of application]: The Radiator Access Cilps and bolts are compatible with Honda Civic 2017-2020, CRV 2017-2020, Accord 2014-2020. Please check the size of the corresponding component model of your car before buying to avoid the wrong purchase.
- [Lower engine shield cover bolt kit Function]:The engine cover screws are used for undercarriage skid plate or oil pan slid plate, promptly replace old or damaged screws and bolts.
- [Easy to use]: Use bolts to fix the oil pan drain plug access cover to its installation point, will not easily fall off.
- See more on Amazon...
Brand: Middrivr | Manufacturer: Middrivr
Dimensions: 0.43 x 0.79 x 0.63 inches
See On Amazon #14
33Ft(10M) Long Car Door Edge Guards,U Shape Edge Trim Rubber Seal Protector Rubber Car Door Protector Car Protection Door Edge Anti-Collision Rubber Clips Fit for Most Car| Black |
Asin: B07Q1YW312 | Model: CARGUAR01-5M | PartNumber: CARGUAR01-5M | Ean: 0745435543585 | UPC: 745435543585
【No Drop Off】 Car Door Edge Guard With 4 Fixed Slices, Completely Tightly Fit, No Drop-Off..
【Easy To Install】 Just Press The Rubber Seal On The Car Door Edge And It Can Hold It Tight, Adhesive-Free Keeps Your Door Edge Clean When You Take It Off. (Attention To Truck/Van Owners, Please Ensure Your Door Edge Thickness Prior To Purchase.).
【The Install Place】 1.In The Metal Edge Of The Car Body Between The Car Door And Car Body. In The External Edge Of The Car Door And More. 2. Also Can Be Use In The Window Above The Car. Window Panel Minibus. Border Heavy Equipment. Covering The Edge Of The Sharp Metal. Vinyl Window Decoration Boat..
【High Versatility】 The Package Include 2 Roll Of Car Door Edge Guards, Total 33Ft(10M) Long. Edge Thickness: 2Mm( 0.78"). Product Specifications As Shown In Figure. These Door Edge Guards Will Protect Your Vehicle From Nicks, Chips & Scratches, For Most Universal Car..
Features
- Durable Waterproof, Isolator Noise, Corrosion Resistance, High-Temperature Resistance, Wear Resistance, Anti-Aging, Uv Resistance.
- High Versatility The package include 2 roll of car door edge guards, total 33Ft(10M) long. Edge Thickness: 2Mm( 0.78). Product Specifications As Shown In Figure. These Door Edge Guards Will Protect Your Vehicle From Nicks, Chips & Scratches, For Most Universal Car.
- No Drop Off Car door edge guard with 4 fixed slices, completely tightly fit, no drop-off.
- The Install Place 1.In The Metal Edge Of The Car Body Between The Car Door And Car Body. In The External Edge Of The Car Door And More. 2. Also Can Be Use In The Window Above The Car. Window Panel Minibus. Border Heavy Equipment. Covering The Edge Of The Sharp Metal. Vinyl Window Decoration Boat.
- Easy to Install Just press the rubber seal on the car door edge and it can hold it tight, adhesive-free keeps your door edge clean when you take it off. (Attention To Truck/Van Owners, Please Ensure Your Door Edge Thickness Prior To Purchase.)
- See more on Amazon...
Brand: MYFAMIREA | Manufacturer: MYFAMIREA
Dimensions: 0.04 x 8.66 x 8.66 inches
See On Amazon #15
Tyger Auto TG-FF6C4218 For 1999-2007 Chevy Silverado/GMC Sierra (2007 Only fit Classic Models) | Textured Matte Black Paintable Factory Style Fender Flare Set, 4 Piece
Asin: B01NBMRN30 | Model: TG-FF6C4218 | PartNumber: TG-FF6C4218 | Ean: 0816239023600 | UPC: 816239023600
Heavy Duty - Special Injection Molding Process Ensures Enhanced Durability, Flexibility And Strength For These Flares To Effectively Withstand Against Cracking, Warping And Chalking Offering A Superior Off-Road Driving Experience..
Tyger Warranty - Limited Lifetime Warranty For Us Customers Against Cracking, Warping Or Any Other Factory Defects..
Easy Installation - Mounting Instruction And Hardware Kit Included; Average Install Time 1+ Hour | No Drilling.
Finish - 4Pc Paintable Fine-Textured 100% Uv-Resistant Fender Flares | Flare Height: 4" In Front And Rear Tire Coverage: 0.75" In Front And Rear.
Features
- FITMENT - Compatible with 1999-2006 Chevy Silverado/GMC Sierra 1500 2500 3500HD; 2007 Classic Fleetside (Not for Stepside) | Not Compatible for Dually models | Mud flaps removal are required prior to installation | Compatible with Aftermarket Bumpers
- FINISH - 4PC Paintable Fine-Textured 100% UV-resistant fender flares | Flare Height: 4 in front and rear Tire Coverage: 0.75 in front and rear
- HEAVY DUTY - Special Injection Molding process ensures enhanced durability, flexibility and strength for these flares to effectively withstand against cracking, warping and chalking offering a superior off-road driving experience.
- EASY INSTALLATION - Mounting instruction and hardware kit included; average install time 1+ hour | no drilling
- TYGER WARRANTY - Limited Lifetime Warranty for US customers against cracking, warping or any other factory defects.
- See more on Amazon...
First Available: 07/12/2018
Brand: Tyger Auto | Manufacturer: Tyger Auto
Dimensions: 40.20 x 53.98 x 1.50 Inches | Weight: 12.00 pounds
Warranty: Lifetime
See On Amazon #16
20Pcs Rocker Moulding Clip & Fender Exterior Trim Clips Compatible with Jeep Grand Cherokee Compass 68172491AA 68271803AA 68395627AA GM 11571175 19352782
Asin: B0BZZ5G969
【Compatibility】Compatible With Buick Chevrolet Gmc Chrysler Jeep Pontiac Saturn Cherokee Compass Grand Cherokee Dodge Durango Challenger.
【Include】20 X Rocker Wheel Flare Moulding Clips, Replace The Old Retaining Clips And Ensure Normal Fixing,And Won't Break Or Break Easily During Use..
【Material】Made Of High-Quality Gray Pom Material, Anti-Wear, And Anti-Corrosion,And Won't Break Or Break Easily During Use..
【Part Numbers】68172491Aa 68271803Aa 68395627Aa 11571175 19352782.
Features
- Size Top Head Size: 12mm x 20mm; Bottom Head Size: 12mm x 20mm; Stem Length: 11mm; Fits Into 9mm Hole ,exact replacement for the old and cracked or missing clips. hight quality materials, Meets or exceed OEM standards.
- Part Numbers 68172491AA 68271803AA 68395627AA 11571175 19352782
- Compatibility Compatible with Buick Chevrolet GMC Chrysler Jeep Pontiac Saturn Cherokee Compass Grand Cherokee Dodge Durango Challenger
- Material Made of high-quality gray POM material, Anti-wear, and anti-corrosion,and won't break or break easily during use.
- Include 20 x Rocker Wheel Flare Moulding Clips, Replace the old retaining clips and ensure normal fixing,and won't break or break easily during use.
- See more on Amazon...
Brand: stymart | Manufacturer: stymart
See On Amazon #17
20pcs Engine Cover Clips Grille Push-Type Retainer Fasteners 7mm Replacement for Toyota Land Cruiser Camry Lexus GS350 GX460 90467-07211
Asin: B0BGXR94LY
Durable Black Nylon Bumper Frosted Finish, Radiator Cover & Grille Push-Type Retainer.
Included 20Pcs Engine Cover Clips.
Fender Filler Panel Clip, Bumper Clip, Radiator Cover Fastener, Grille Push-Type Retainer, Cowl Cover Clip, Seal Retainer Clip, Sight Shield Retainer, Sight Shield Retainer Clip, Upper Grille Clip, Front And Rear Mud Flap Guards Clip.
Oem Number: 90467-07211, 9046707211.
Features
- Size: 7mm hole, head diameter: 19mm, stem length: 8mm,
- OEM number: 90467-07211, 9046707211
- Durable Black Nylon Bumper Frosted Finish, Radiator Cover & Grille Push-Type Retainer
- Fender Filler Panel Clip, Bumper Clip, Radiator Cover Fastener, Grille Push-Type Retainer, Cowl Cover Clip, Seal Retainer Clip, Sight Shield Retainer, Sight Shield Retainer Clip, Upper Grille Clip, Front and Rear Mud Flap Guards Clip
- Included 20pcs engine cover clips
- See more on Amazon...
Brand: TOPCNOEM | Manufacturer: TOPCNOEM
See On Amazon #18
sdano Fender Flares Edge Trim, Fender Flare Rubber Seal for Car and Truck Wheel Wells, Rubber Gasket for Fender Flares Universal, Bonds w/ 3M Automotive-Grade Adhesive Tape, T-Style, 30 Length
Asin: B08CRMWR7H | Model: SDTR-1010 | PartNumber: SDTR-1010 | Ean: 0757249136716 | UPC: 757249136716
High Performance: This Fender Flare Edge Trim Is Made Of Epdm Rubber Material With Excellent Performance, Ozone Resistant, Weather-Resistant, Very Flexible..
Easy To Install: This Fender Flare Trim Comes In Acrylic Automotive-Grade Adhesive Tape.Strong Bonding And Easy Installation..
Save Money: 30 Feet Length, Enough To Cover All 4 Fender Flares. No Need Re-Order To Finish The Job, Save Your Money..
Clean Lines: Wiper Style Shape, Adding Extra Coverage To Your Vehicle, Creates A Clean Line Between The Vehicle’S Body And The Flare..
Features
- PROVIDE PROTECTION: This flare trim is installed between the fender flare and the vehicle s body, which can isolate vibration, reduce friction, protect the car paint, and eliminate the risk of pinching rocks and debris between the fender flare and the body of your vehicle.
- CLEAN LINES: Wiper style shape, adding extra coverage to your vehicle, creates a clean line between the vehicle s body and the flare.
- HIGH PERFORMANCE: This fender flare edge trim is made of EPDM rubber material with excellent performance, ozone resistant, weather-resistant, very flexible.
- SAVE MONEY: 30 FEET length, enough to cover all 4 fender flares. No need re-order to finish the job, save your money.
- EASY TO INSTALL: This fender flare trim comes in acrylic automotive-grade adhesive tape.Strong bonding and easy installation.
- See more on Amazon...
Brand: sdano | Manufacturer: sdano
Weight: 0.74 Pounds
See On Amazon #19
GOOACC 100PCS Nylon Bumper Fastener Rivet Clips for GM 21030249 for Ford N807389S,1PC Bonus Fastener Remover
Asin: B07P413F41 | Model: GRC-44 | PartNumber: GRC-44 | Ean: 0714035519016 | UPC: 714035519016
Push-Type Design - Push In Type, Rivet Post Pressure Expands Legs For Fast And Tight Fastening. Easy To Fasten Bumper Fender Flare And Mud Flap. Better Replacement For Original Bumper And Fender Clips..
Package Include: 100Pcs Fastener Rivet Clips,1Pc Fastener Remover.
Great Material - These Bumper Clips Are Made Of High-Quality Black Nylon Material, Anti-Wear And Anti-Corrosion, Would Not Break Or Crack Easily During Use..
The Same Size & Shape As Original - Head Dia: 20Mm; Stem Length: 20Mm & Fits: 8Mm (5/16") Hole,Hese Universal Push-Type Fastener Clips Will Fit On Most Of Auto Parts With 8Mm Hole, Hold Your Parts Very Tightly..
Features
- MULTI-USE - Replacement for: GM #21030249, Ford #N807389S & Chrysler #6503598; all 2 & 4 door models 1991-up
- THE SAME SIZE & SHAPE AS ORIGINAL - Head dia: 20mm; stem length: 20mm & fits: 8mm (5/16) hole,hese universal push-type fastener clips will fit on most of auto parts with 8mm hole, hold your parts very tightly.
- Push-type Design - Push in type, rivet post pressure expands legs for fast and tight fastening. easy to fasten Bumper Fender Flare and Mud Flap. Better replacement for original bumper and fender clips.
- Great Material - These bumper clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use.
- PACKAGE INCLUDE: 100PCS Fastener Rivet Clips,1PC Fastener Remover
- See more on Amazon...
Brand: GOOACC | Manufacturer: GOOACC
Warranty: 2 Years Warranty
See On Amazon #20
ToLanbbt Rubber Edge Trim U Channel, Self Adhesive Sheet Metal Edge Guard Protector, EPDM Seal Strip for Car Doors, Steel Plates, Glass, Hatches, Table Corners, Fit 1/16"(1.6mm), 20Ft, Black
Asin: B0C9LLDHM1 | Model: 0 | PartNumber: 0
【Multi-Function】By Using U Channel Trim, The Risk Of Accidental Scratches Can Be Reduced. It Can Also Play A Decorative Role, Keeping Your Items Neat And Beautiful, Reducing Wear And Tear, And Away From Dust And Noise. Metal Edging Trim Is Your Ideal Choice..
【Wide Application】Black Edge Trim Is Suitable For Covering Various Sheet Metal Parts, Such As Lockers, Hatches, Panels, Tables, Glass, Planks, Plastic. Sheet Metal Edge Protector Can Also Be Used For Car Doors To Avoid Peeling Paint Due To Collisions Or Scratches..
【Easy To Use】Epdm Material Is Flexible And Easy To Cut. Metal Edge Protector Strip Can Withstand Bending Without Losing Its Properties. You Can Use It Even In Complex Angles. Note: For Better Stickiness, You Can Clean The Area Before Installation..
【Self-Adhesive】Compared With Other Edge Trims, Our Self Adhesive Design Is More Convenient. Tear Off Red Film Can Be Installed.Thanks To Self-Adhesive Design, Rubber Edge Trim Is Not Easy To Fall Off. No Trace Will Be Left After Removing Sheet Metal Edge Trim..
Features
- Premium Material Made of high quality EPDM, edge trim has good heat and cold resistance. Trim Edging can be used in -40F to +212F, won't freeze or cracking in extreme temperatures. Rubber edging is weatherproof, anti-aging and anti-ozone, suitable for long-term using.
- Self-Adhesive Compared with other edge trims, our self adhesive design is more convenient. Tear off red film can be installed.Thanks to self-adhesive design, rubber edge trim is not easy to fall off. No trace will be left after removing sheet metal edge trim.
- Multi-Function By using U channel trim, the risk of accidental scratches can be reduced. It can also play a decorative role, keeping your items neat and beautiful, reducing wear and tear, and away from dust and noise. Metal edging trim is your ideal choice.
- Easy to Use EPDM material is flexible and easy to cut. Metal edge protector strip can withstand bending without losing its properties. You can use it even in complex angles. Note: For better stickiness, you can clean the area before installation.
- Wide application Black edge trim is suitable for covering various sheet metal parts, such as lockers, hatches, panels, tables, glass, planks, Plastic. Sheet metal edge protector can also be used for car doors to avoid peeling paint due to collisions or scratches.
- See more on Amazon...
Brand: ToLanbbt | Manufacturer: ToLanbbt
Dimensions: 0.50 x 240.00 x 0.06 inches
See On Amazon
Looking For Something Else?
Search