uxcell M10 x 30mm Plastic Phillips Machine Screws with Nuts and Flat Washers, PC Flat Head Machine Bolts Transparent 20 Sets
Asin: B0B7RC98CS
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features: Lightweight, High Toughness, High Impact Resistance, Anti-Static, Non-Conducting, Good Insulation, Chemical Resistance, Hydrolysis Resistance, Corrosion Resistance, No Rust, Heat-Resistant And Long Service Life..
Application: Widely Used In The Electronics Industry, Wind Power Industry, Aerospace Industry, Office Equipment Industry, Communication Industry, Shipbuilding Industry, Exhibition Industry, Diy Handicraft, Etc..
Advantage: The Countersunk Style Makes It Very Suitable For Use In Tight Areas Where The Screw Head Needs To Be Flush Or Below The Surface..
Material: Screws, Nuts And Washers Are Made Of Polycarbonate Material, Which Is Sturdy, Transparent And Engineering Thermoplastic..
Features
- Specification: Thread Size: M10 x 30mm; Pitch: 1.5mm / 0.06"; Package Content: 20 Sets x Phillips Machine Screws with Nuts, Flat Washers
- Material: Screws, nuts and washers are made of polycarbonate material, which is sturdy, transparent and engineering thermoplastic.
- Features: Lightweight, high toughness, high impact resistance, anti-static, non-conducting, good insulation, chemical resistance, hydrolysis resistance, corrosion resistance, no rust, heat-resistant and long service life.
- Advantage: The countersunk style makes it very suitable for use in tight areas where the screw head needs to be flush or below the surface.
- Application: Widely used in the electronics industry, wind power industry, aerospace industry, office equipment industry, communication industry, shipbuilding industry, exhibition industry, DIY handicraft, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell M10 x 30mm Plastic
#1
uxcell Clamping Screw Knob, 38mm Dia Plum Hex Shaped Grips Star Knob M10 x 25mm Male Thread, 4pcs
Asin: B07R9K6PHR | Model: a19031300ux0089 | PartNumber: a19031300ux0089
Great Replacement For Your Broken One With This Knob..
Widely Used For Lathe Machine, Mechanical Equipment, Instrument And Apparatus, Industry Equipment..
Thread Type Is Metric M10 , Please Check The Thread Size You Need Before Buying..
Total Height:43Mm / 1.70Inch; Thread Pitch: 1.5Mm ; Package Content: 4Pcs X Screw Knob..
Features
- Thread Size:M10 x 25mm / 0.39 x 0.98inch(D*L); Head Dia (Approx): 38mm / 1.47inch
- Total Height:43mm / 1.70inch; Thread pitch: 1.5mm ; Package Content: 4pcs x Screw Knob.
- Great replacement for your broken one with this knob.
- Thread Type is metric M10 , please check the thread size you need before buying.
- Widely used for lathe machine, mechanical equipment, instrument and apparatus, industry equipment.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.01 x 0.98 x 0.39 inches | Weight: 0.23 pounds
See On Amazon #2
uxcell 5 Pairs Metric Hand Threading Tap Set M1 Thread 0.25mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel
Asin: B07WMQY1C8 | Model: a19070800ux0130 | PartNumber: a19070800ux0130
Easy To Use: Hand Tapping, Mainly Used With Tap Wrenches. Standard Thread Milling Taps Are Used To Thread Through Holes Or Shallow And Blind Holes..
Tips: Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps. Without Any Additional Coatings, Good For General Purpose Applications..
Features: Straight Flute Design, Downward Chip Removal. High Speed Steel Tool Is High Hardness, High Strength, Good Toughness, And Wear Resistance..
Applications: The Hand Threading Tap Kit Is Used To Re-Thread Damaged Or Jammed Threads. Suitable For Threading Mild Steels, Aluminum, Iron, Copper, Hard Plastic..
Features
- Metric Taps: M1 x 0.25 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes.
- Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic.
- Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes.
- Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance.
- Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell 10mm x 30mm Plastic Rectangle Caps Tube Inserts End Blanking 12 Pcs
Asin: B00S4YLQO8 | Model: a14091000ux0207 | PartNumber: a14091000ux0207
Material : Plastic;Color : Black.
Package Content : 12 X Rectangletube Insert.
Net Weight : 28G.
Thread Size : 8 X 28Mm / 0.3" X 1.1"(L*W);Overall Height : 14Mm / 0.71".
Features
- Product Mame : RectangleTube Insert;Top Size : 10 x 30mm / 0.4" x 1.2"(L*W)
- Thread Size : 8 x 28mm / 0.3 x 1.1(L*W);Overall Height : 14mm / 0.71
- Material : Plastic;Color : Black
- Net Weight : 28g
- Package Content : 12 x RectangleTube Insert
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell M10x30mm 10.9 Alloy Steel Button Head Hex Socket Cap Screw Bolt Black 10pcs
Asin: B01C3KUPDQ | Model: a16011300ux0840 | PartNumber: a16011300ux0840 | Ean: 0602451053941 | UPC: 602451053941
Thread Size: M10x30mm/0.4"X1.2"(D*L); Weight: 210G.
Hex Socket Width: 6Mm/0.24"; Head Size: 18X5mm/0.7"X0.2"(D*H).
Thread Pitch: 1.5Mm; Total Length: 35Mm/1.4".
Package Content: 10Pcs X Button Head Screws; Product Name: Button Head Screws.
Features
- Drive Type: Hex Socket; Head Style: Button Head; Material: 10.9 Alloy Steel
- Package Content: 10pcs x Button Head Screws; Product Name: Button Head Screws
- Thread Size: M10x30mm/0.4x1.2(D*L); Weight: 210g
- Thread Pitch: 1.5mm; Total Length: 35mm/1.4
- Hex Socket Width: 6mm/0.24; Head Size: 18x5mm/0.7x0.2(D*H)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #5
uxcell M10x50mm Hanger Bolts, 8pcs 30mm Wood Dowel Screw Self-Tapping Screw with 8pcs M10x20mm Threaded Insert Nuts Interface Hex Socket Drive, for Joint Furniture Legs
Asin: B0CW1MPV8X
Material: Made Of Carbon Steel, Color Galvanized Surface Treatment, High Hardness, And Good Wear Resistance, Standard Inner Hexagon Socket; Provides Great Corrosion Resistance And Antirust Ability For Long Service Life..
Applications: Suitable For Connecting Various Objects, Such As Outdoor Furniture, Household Furniture, Stair Columns, Wooden Guardrails, Solid Wood Furniture, Customized Furniture, And Office Furniture. It Has A Good Effect On Furniture Combinations..
Advantage: The Hanger Bolt Is Good For Wooden Furniture Jointing. Wood Screw Thread On One End And A Machine Screw Thread On The Other End; Inner Hex Head With Flange, Evenly Stressed On The Inner And Outer Teeth, And The Structure Is More Stable..
Double-Headed Bolts: Thread Dia: M10(Machine Screw); Thread Dia: 10Mm/0.39"(Wood Screw); Total Length: 50Mm/1.97"; Machine Screw Thread Length: 20Mm/0.79"; Wood Screw Thread Length: 30Mm/1.18"; Machine Screw Pitch: 1.5Mm.
Features
- Nuts Sizes: Internal Thread Size: M10; Nut External Dia: 16.7mm/0.66"; Internal Hex Width: 10mm/0.39"; Length: 20mm/0.79"; Package Content: 8pcs x Hanger Bolts; 8pcs x Insert Nuts Interface
- Double-Headed Bolts: Thread Dia: M10(Machine screw); Thread Dia: 10mm/0.39(Wood screw); Total Length: 50mm/1.97; Machine Screw Thread Length: 20mm/0.79; Wood Screw Thread Length: 30mm/1.18; Machine Screw Pitch: 1.5mm
- Material: Made of carbon steel, color galvanized surface treatment, high hardness, and good wear resistance, standard inner hexagon socket; Provides great corrosion resistance and antirust ability for long service life.
- Advantage: The hanger bolt is good for wooden furniture jointing. Wood screw thread on one end and a machine screw thread on the other end; Inner hex head with flange, evenly stressed on the inner and outer teeth, and the structure is more stable.
- Applications: Suitable for connecting various objects, such as outdoor furniture, household furniture, stair columns, wooden guardrails, solid wood furniture, customized furniture, and office furniture. It has a good effect on furniture combinations.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell Die Stock Handle Wrench, for Metric M10-M11 (Metric) / 3/8"-7/16" (UNC/UNF) / 30mm OD Round Dies, 30mm x 11mm Threading Die Holder with Plastic Handle
Asin: B0CPJB5T8N
Features: Round Die Wrench Is Designed With 5 Adjustable Screws To Fix The Dies. The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. When Exposed To Liquid Or Moisture, The Ergonomic Plastic Dipped Handle Provides A Secure, Comfortable Grip During Use..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Apply Even And Consistent Pressure While Turning The Die Stock Handle. Tighten The Adjustable Screws Of The Die Stock Firmly Around The Die To Ensure A Secure Grip..
Easy To Use: The Positioning Groove Of The Die (Not Included) Should Be Aligned With The Fastening Screws Of The Wrench, And The Screws Should Be Inserted Into The Die Groove And Tightened. Apply Cutting Oil Or Lubricant To The Workpiece And Die Before Starting Threading To Get Smoother, Cleaner Threads..
Wide Applications: The Die Handle Wrench Can Accurately Cut, Repair Or Clean External Threads On Rods, Bolts, Screws, Pipes, Shafts, And Other Cylindrical Objects, Or Simply Remove Bolts And Threaded Rods (When Used With Round Dies)..
Features
- Die Stock Wrench: Fit Die Size: M10-M11 (Metric) / 3/8"-7/16" (UNC/UNF) / 30mm OD Die; Die Stock Size: 30mm x 11mm / 1.18" x 0.43". The die stock is made of alloy steel for strength and durability. Black oxide coating provides extra protection against rust and corrosion.
- Wide Applications: The die handle wrench can accurately cut, repair or clean external threads on rods, bolts, screws, pipes, shafts, and other cylindrical objects, or simply remove bolts and threaded rods (when used with round dies).
- Features: Round die wrench is designed with 5 adjustable screws to fix the dies. The die stock can securely hold round dies and is easy to operate. When exposed to liquid or moisture, the ergonomic plastic dipped handle provides a secure, comfortable grip during use.
- Easy to Use: The positioning groove of the die (not included) should be aligned with the fastening screws of the wrench, and the screws should be inserted into the die groove and tightened. Apply cutting oil or lubricant to the workpiece and die before starting threading to get smoother, cleaner threads.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Apply even and consistent pressure while turning the die stock handle. Tighten the adjustable screws of the die stock firmly around the die to ensure a secure grip.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell M10 X 1.5 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel Screw Thread Cutting Die
Asin: B07Q7YK2FK | Model: a18122900ux0474 | PartNumber: a18122900ux0474
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: M10 X 1.5; outside diameter (OD): 30mm / 1.2"; Thickness: 11mm / 0.43"; fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell M10 x 1.5mm Metric Left Hand Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0983BV6B4 | Model: a21031100ux0278 | PartNumber: a21031100ux0278
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M10 x 1.5 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, left hand (reverse) tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #9
uxcell Clamping Screw Knob, 38mm Dia Plum Hex Shaped Grips Star Knob M10 x 30mm Male Thread, 2pcs
Asin: B07R8CRGVG | Model: a19031300ux0090 | PartNumber: a19031300ux0090
Great Replacement For Your Broken One With This Knob..
Widely Used For Lathe Machine, Mechanical Equipment, Instrument And Apparatus, Industry Equipment..
Thread Type Is Metric M10 , Please Check The Thread Size You Need Before Buying..
Total Height: 48Mm / 1.86Inch ; Package Content: 2Pcs X Screw Knob..
Features
- Thread Size:M10 x 30mm / 0.39 x 1.19inch(D*L); Head Dia (Approx): 38mm / 1.47inch.Thread Pitch: 1.5mm
- Total Height: 48mm / 1.86inch ; Package Content: 2pcs x Screw Knob.
- Great replacement for your broken one with this knob.
- Thread Type is metric M10 , please check the thread size you need before buying.
- Widely used for lathe machine, mechanical equipment, instrument and apparatus, industry equipment.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.47 x 1.47 x 1.47 inches
See On Amazon #10
uxcell Round Knurled Thumb Nuts Conector Lock Adjusting Nuts, M10 Female Threaded Thin Type, Nickel Plated, Pack of 5
Asin: B07L6B9VHC | Model: a18111300ux0363 | PartNumber: a18111300ux0363
Material: Made Of Carbon Steel, Nickel Plated Finished, Wear-Resisting And Durable To Use..
Package Content: 5 X Knurled Nuts.
Great For Use In Electronic Applications And Things That Require Quick Adjustments..
Overall Size: 30 X 8Mm / 1.2" X 0.31"(D*H).
Features
- Thread Size: M10 x 1.5mm
- Overall Size: 30 x 8mm / 1.2 x 0.31(D*H)
- Material: Made of carbon steel, nickel plated finished, wear-resisting and durable to use.
- Great for use in electronic applications and things that require quick adjustments.
- Package Content: 5 x Knurled Nuts
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.94 x 3.94 inches
See On Amazon #11
uxcell M10 x 0.5mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0983D9WQF | Model: a21020200ux0310 | PartNumber: a21020200ux0310
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M10 x 0.5 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction. Tap Size: thread length: 24mm / 0.94"; overall length: 79mm / 3.11"; square shank: 6mm / 0.24"; Die Size: outside diameter (OD): 30mm / 1.18"; thickness: 8mm / 0.31"
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell 5pcs M10x30mm Insert Nuts, 8pcs M10x100mm Hanger Bolts, Wood Furniture Set
Asin: B09LQVC92H | Model: f21092300ux0069 | PartNumber: f21092300ux0069
The Threaded Insert Nuts And Hanger Bolts Are Made Of Carbon Steel, Construction With Zinc Plated Provides Great Corrosion Resistance And Antirust Ability For Long Service Life..
Need A Pre-Hole Before Using. The Mounting Hole Should Not Be Larger Than The Outer Diameter Of The Thread..
Good For Wooden Furniture. Such As Outdoor Furniture, Household Furniture, Stair Post, Wooden Guardrail, Solid Wood Furniture, Custom Furniture, Office Furniture..
Product Name 2: Hanger Bolt; Thread Diameter: M10; Total Length: 100Mm / 3.94"; Wood Screw Thread Length（Min）: 60Mm / 2.36"; Machine Screw Thread Length（Min）: 30Mm / 1.18".
Features
- Product Name 1: Threaded Insert; Internal Thread Size: M10; Total Height: 30mm / 1.18"; External Thread Diameter: 16mm / 0.63"; Head Diameter: 17mm/0.67"; Hex Socket Width:10mm/0.39"
- Product Name 2: Hanger Bolt; Thread Diameter: M10; Total Length: 100mm / 3.94; Wood Screw Thread Length Min : 60mm / 2.36; Machine Screw Thread Length Min : 30mm / 1.18
- The threaded insert nuts and hanger bolts are made of carbon steel, construction with zinc plated provides great corrosion resistance and antirust ability for long service life.
- Good for wooden furniture. Such as outdoor furniture, household furniture, stair post, wooden guardrail, solid wood furniture, custom furniture, office furniture.
- Need a pre-hole before using. The mounting hole should not be larger than the outer diameter of the thread.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell Stainless Steel C-Clamp, 40mm Wide Jaw Opening with T-Bar Handle for Woodworking Welding Building 2 Pcs
Asin: B0B1VM4FK4 | Model: a22030500ux0070 | PartNumber: a22030500ux0070
Easy Installation - With Adjustable T Bar Screws, The Screws Can Be Adjusted As Needed, Which Is Simple And Convenient To Use..
Widely Used - For General Clamping Needs, For Assembly, Fastening, Bonding And Welding In Metalworking, Designed For Woodworker, Welder, And Construction Worker..
Design - I-Beam Frame Provides Strength; Special Clamping Pads That Apply Pressure Evenly And Prevent Damage When Turning The Screw..
Durable To Use - Made Of Stainless Steel, Corrosion-Resistant, Rust-Resistant, U Clamps Is 0.18 Inches Thick, Strong And Not Easy To Break..
Features
- Clamping Range - 0 ~ 37mm (0" ~ 1.46").
- Durable to Use - Made of stainless steel, corrosion-resistant, rust-resistant, U clamps is 0.18 inches thick, strong and not easy to break.
- Easy installation - With adjustable T bar screws, the screws can be adjusted as needed, which is simple and convenient to use.
- Design - I-beam frame provides strength; Special clamping pads that apply pressure evenly and prevent damage when turning the screw.
- Widely Used - For general clamping needs, for assembly, fastening, bonding and welding in metalworking, designed for woodworker, welder, and construction worker.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell M10x30mm Hex Head Screw Bolts Fastener Grade 8.8 Carbon Steel Black 5pcs
Asin: B07KM2MHMQ | Model: a18091500ux0144 | PartNumber: a18091500ux0144
Hex Thickness: 6.5Mm / 0.26"; Pitch: 1.5Mm / 0.06"; Performance Grade: 8.8.
Used Widely In The Home And Office Appliance, Communication Equipments, Ship Assembly And Other Machinery Industry..
Surface Treatment: Black; Package Content: 5 X Carbon Steel Hex Head Bolts.
Dimension: M10 X 30Mm; Rod Length: 30Mm / 1.18"; Hex Width: 16Mm / 0.62".
Features
- Product Name: Hex Head Bolts; Main Material: Carbon Steel
- Dimension: M10 x 30mm; Rod Length: 30mm / 1.18; Hex Width: 16mm / 0.62
- Hex Thickness: 6.5mm / 0.26; Pitch: 1.5mm / 0.06; Performance Grade: 8.8
- Surface Treatment: Black; Package Content: 5 x Carbon Steel Hex Head Bolts
- Used widely in the home and office appliance, communication equipments, ship assembly and other machinery industry.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 2.76 x 2.36 inches
See On Amazon #15
uxcell M10 X 0.5 Metric Round Die, Machine Thread Right Hand Threading Die, Alloy Steel Screw Thread Cutting Die
Asin: B07R77ZHDL | Model: a18122900ux0442 | PartNumber: a18122900ux0442
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: M10 X 0.5; outside diameter (OD): 30mm / 1.2"; Thickness: 8mm / 0.31"; accuracy class: 6g; fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell M10 X 1.25 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die, 2pcs
Asin: B08HY58BFV | Model: a19122800ux0390 | PartNumber: a19122800ux0390
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: M10 X 1.25; outside diameter (OD): 30mm / 1.2"; Thickness: 11mm / 0.43"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #17
uxcell 10Pcs M10 x 30mm Fully Threaded Rod 304 Stainless Steel Right Hand Threads,M10-1.5 Thread Pitch
Asin: B09L6829JQ | Model: a21073000ux0207 | PartNumber: a21073000ux0207
Used For Assembly Fastening, Screw Into Threaded Nuts Or Tapped Holes..
Material : 304 Stainless Steel; Total Length: 30Mm/1.18"; Thread: Right Hand Thread; Thread Pitch: 1.5Mm.
Type: Fully Threaded Rod; Color: Silver Tone; Thread Dia: M10.
Fully Threaded Rods Are Widely Applied In Many Occasions..
Features
- 304 stainless steel, provides great corrosion resistance and antirust ability for a long service life.
- Fully threaded rods are widely applied in many occasions.
- Used for assembly fastening, screw into threaded nuts or tapped holes.
- Type: Fully Threaded Rod; Color: Silver Tone; Thread Dia: M10
- Material : 304 stainless steel; Total Length: 30mm/1.18; Thread: Right Hand Thread; Thread Pitch: 1.5mm
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell 4Pcs Inserts for Round Tubes with M10 Thread, for 30mm/1.18" OD Round Tube, Round Black Plastic Plug Caster Insert Chair End Caps Furniture Leg Plug
Asin: B0BWTWVLZ7 | Model: a22111600ux0459 | PartNumber: a22111600ux0459
Effect: The Thread Tube Plug Can Choose Caster Installation For Easy Movement; Choose Adjustable Feet For Balance, Protect The Floor, And Be Anti-Skid And Noise Reduction..
Application: The Nut Plug Is For Office Or Household Furniture. Such As Mechanical Equipment, Fitness Equipment, Racks, Tv Stands, Table, Shelves, Beach Chairs, Desk Legs, And So On..
Easy Installation: The Chair Leg Plug Comes With Ribs, Only Requiring Lining Up With The Before Tapping It Into Position. Ribs Provide A Secure Fitting And Prevent The Need For Additional Adhesives..
Material: The Tube Plug Nut Is Made Of Black Plastic, With Thread, Can Be Fitted With Casters And Adjustable Pads, Has An Adjustable Height, Is Not Easy To Deform, And Has More Stable Support..
Features
- Material: Plastic; Thickness: 6mm/0.24"; Inner Height: 20mm/0.79"; Overall Height: 26.5mm/1.04"; Thread Size: M10*1.5; Diameter: 30mm/1.18"; Package Includes: 4 x Threaded Tube Inserts (Does Not Contain Adjustable Leveling Legs)
- Material: The tube plug nut is made of black plastic, with thread, can be fitted with casters and adjustable pads, has an adjustable height, is not easy to deform, and has more stable support.
- Effect: The thread tube plug can choose caster installation for easy movement; choose adjustable feet for balance, protect the floor, and be anti-skid and noise reduction.
- Easy Installation: The chair leg plug comes with ribs, only requiring lining up with the before tapping it into position. ribs provide a secure fitting and prevent the need for additional adhesives.
- Application: The nut plug is for office or household furniture. such as mechanical equipment, fitness equipment, racks, tv stands, table, shelves, beach chairs, desk legs, and so on.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell Clamping Screw Knob, 38mm Dia Plum Hex Shaped Grips Star Knob M10 x 30mm Male Thread, 5pcs
Asin: B07R46YV87 | Model: a19031300ux0091 | PartNumber: a19031300ux0091
Great Replacement For Your Broken One With This Knob..
Widely Used For Lathe Machine, Mechanical Equipment, Instrument And Apparatus, Industry Equipment..
Thread Type Is Metric M10 , Please Check The Thread Size You Need Before Buying..
Total Height: 48Mm / 1.86Inch ; Package Content: 5Pcs X Screw Knob..
Features
- Thread Size:M10 x 30mm / 0.39 x 1.19inch(D*L); Head Dia (Approx): 38mm / 1.47inch.
- Total Height: 48mm / 1.86inch ; Package Content: 5pcs x Screw Knob.
- Great replacement for your broken one with this knob.
- Thread Type is metric M10 , please check the thread size you need before buying.
- Widely used for lathe machine, mechanical equipment, instrument and apparatus, industry equipment.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.01 x 1.18 x 0.39 inches
See On Amazon #20
uxcell Furniture Levelers, 14mm to 22mm Adjustable Height M10 x 18.5mm Threaded, 12Pcs
Asin: B07Q2RR4DV | Model: a19012500ux0164 | PartNumber: a19012500ux0164
[Keep Balance] - If The Floor Is Rough Or The Leg Of The Product Is Bad, You Can Installed It At The Bottom Of Your Product To Stay Balanced.
[Applications] - Such As Tv Stands, Table, Cabinet, Shelves, Beach Chairs, Desk, Racks, Mechanical Equipment, Fitness Equipment, And So On.
[Floor Protector] - It Can Effectively Protect The Product During The Movement, Prevent Scratches And Reduce Sharp Noise.
[Package Content] - 12 Pieces Adjustable Leveling Foot, Can Be Used For Office Or Household Furniture Even Industrial Machine.
Features
- [Size] - M10 x 18.5mm Threaded, Adjustable Height 14mm to 22mm
- [Package Content] - 12 pieces adjustable leveling foot, can be used for office or household furniture even industrial machine
- [Keep Balance] - If the floor is rough or the leg of the product is bad, you can installed it at the bottom of your product to stay balanced
- [Floor Protector] - It can effectively protect the product during the movement, prevent scratches and reduce sharp noise
- [Applications] - Such as TV stands, table, cabinet, shelves, beach chairs, desk, racks, mechanical equipment, fitness equipment, and so on
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search