Imdinnogo BCZAMD Artilery Sidewinde X2 3D Printer Replacement Accessories 24 Pin Ribbon FPC Cable Length 500mm/19.6inch Rounts from The Extruder Breakout to X Axis Breakout
Asin: B0B93BT6LZ | Model: AiUS-X2 FPC 24Pin 500mm | PartNumber: AiUS-X2 FPC 24Pin 500mm
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Ribbon Connector( Differ ) : 20 Pin+Pcb, 19.6 Inch. The Spacing Between Each Pin Is 1.0Mm..
When Install, Please Confirm You Have Pull Open The Buckle, Put The Correct Needle Contacts, And Fasten..
Kind Tips: Only Design For Sidewinde-Sw2, Not Include The Transfer Board( If Need Please Enter Our Shop), Did Not Fit For Printer Geniou And Pro, And Other Transfer Board, If You Need Further, Please Feel Free To Email Us..
Material: Fpc, Flexible, Stable And Durable..
Features
- Directly 3D Printing replacement parts, only fit for Artilery Sidewinde-SW2: this is the 24 pin cable that routes from the Extruder breakout(J1)/ PCB to the X Axis breakout(J1)/ PCB. the contacts can replace the stock ones directly, stick down stable. The adhesive tape on the back was long enough, and strong.
- Material: FPC, Flexible, Stable and durable.
- Ribbon Connector( differ ) : 20 Pin+PCB, 19.6 inch. the spacing between each pin is 1.0mm.
- Kind Tips: only design for Sidewinde-SW2, not include the transfer board( if need please enter our shop), did not fit for printer geniou and pro, and other transfer board, if you need further, please feel free to email us.
- When install, please confirm you have pull open the buckle, put the correct needle contacts, and fasten.
- See more on Amazon...
Brand: Imdinnogo | Manufacturer: Aimengda
See On Amazon Similar To Imdinnogo BCZAMD Artilery Sidewinde X2
#1
Imdinnogo BCZAMD 3D Printer Ttan Extruder Hobb Level Gear Hardened Steel Precision Milled Bearing Replacement Part for 1.75 Filament for Prusa i3 MK2 MK3 Artilery Sidewinde X1X2 Ultimak V4 Hornett 2Pc
Asin: B0BM5FYLVS | Model: AiUS-Ttan Extruder Hobb Gear | PartNumber: AiUS-Ttan Extruder Hobb Gear
Works For 1.75Mm Filament Pla Abs Tpu, Not For 3.0Mm Filament..
Upgraded Bearing: The Middle Of The Bearing With Groove, Which Is Beneficial To Tighten The Filament, Especially Soft Filament Like Tpu, Never Skid. The Other Bearing Hold The Stepper Motor, Smooth..
Material: Made Of Hardness 303 Stainless Steel And Plastic, Sturdy And Durable, With Good Corrosion And Rust Resistance..
Adjustable Design: Our Extruder Plastic Gears Have Adjustable Design And Can Freely Adjust The Tension According To The Characteristics Of The Extruder Filament. Make Sure The Gears Better Engage With The Filament To Avoid Damage..
Features
- Upgrade replacement Accessories for 3D Printer Extruder: mainly used to replace the original titaniumm Aero extruder gear, Ultimate, Prusaa MK2 MK3, Artillery Hornet, Sidewinder X1 X2 Genius Extruder . If you want to use on Creallity Tita Extruder kit, SV01 SV02 stock extruder, please use our spare bearing to replace your stock bearing, then it can work well too. Increase the running speed and bring better experience.
- Adjustable design: Our extruder plastic gears have adjustable design and can freely adjust the tension according to the characteristics of the extruder filament. Make sure the gears better engage with the filament to avoid damage.
- Works for 1.75mm Filament PLA ABS TPU, not for 3.0mm filament.
- Material: Made of hardness 303 stainless steel and Plastic, Sturdy and durable, with good corrosion and rust resistance.
- Upgraded Bearing: The middle of the bearing with groove, which is beneficial to tighten the filament, especially soft filament like TPU, NEVER Skid. The other bearing hold the stepper motor, smooth.
- See more on Amazon...
Brand: Imdinnogo | Manufacturer: Aimengda
See On Amazon #2
Imdinnogo BCZAMD Artilery SW-X2 3D Printer Replacement Parts FPC 24 Pin Ribbon Cable Length 420mm/ 16.5in No Bend Sidewinde X2 Controller Board Connector Line-2Pcs
Asin: B0B3X2NGJC | Model: AiUS-X2 24Pin Ribbon FPC | PartNumber: AiUS-X2 24Pin Ribbon FPC
Ribbon Connector: 24 Pin..
Package Includes: 2Pcs 24 Pin Ribbon Cable..
If You Need Sidewinde Replacement Arm Or Heater Caridge, Hotend Kit, Please Welcome To Our Shop..
Material: Fpc, Flexible, Stable And Durable..
Features
- Replacement Transfer Extruder Board Controller with FPC 24 Pin Ribbon Cable, Compatible with Sidewinde X2.
- Material: FPC, Flexible, Stable and durable.
- Ribbon Connector: 24 Pin.
- If you need Sidewinde replacement arm or heater caridge, hotend kit, please welcome to our shop.
- Package includes: 2Pcs 24 Pin Ribbon Cable.
- See more on Amazon...
Brand: Imdinnogo | Manufacturer: Aimengda
See On Amazon
Looking For Something Else?
Search