Imdinnogo BCZADM Resin Printing Flex Magnetic Bed Build Plate 150x95mm/5.9X3.4in Resin Edition Stainless Steel Metal Plate with Strong Magnetic Sticker for Elego Mar 3 SLA 3D Printer Part Accessories
Asin: B0B97GX6N3
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Tips: Used Clamps To Hold The Flex-Plate And Magnet Against The Build-Plate For 72 Hours. Or Set It Down And Stacked A Heavy Of Stuff On Top Of The Build Plate For 48 Hours To Make Sure The Adhesive Was Good And Stuck..
Several 3D Printing Youtubers Have Relevant Videos You Should Watch Before You Try. After Every Printing, If Did Not Stick, Sanded Your Plate, Also Use Some Steel Wool (Or Suggest 150 - 400 Grit Sandpaper.) To Scuff Up The Metal Sheet To Ensure Adhesion For Your Prints..
Step 2: Before Installing,We Recommand To Print/Install A Z-Axis Spacer Also Get Longer Screws To Keep The New Assembly In Place, Reference (Thingiverse: 4533310), It Can Avoid The Build Plate Will Impact The Glass Every Time , Reset Your Z Limit To Account For The Additional 2.6 Mm, Re-Level Your Machine And You're Golden!.
How To Install Well: Step 1- Make Sure To Thoroughly Clean Your Build Plate Before Sticking The Adhesive Pad To It! Then Stick The Magnetic Thing To The Build Plate..
Features
- Plex plate is a must-have for resin printing, its an amazing product that will really improve your printing experience: Easy to use and the prints pop off without any difficulty.
- How to install well: Step 1- Make sure to thoroughly clean your build plate before sticking the adhesive pad to it! Then stick the magnetic thing to the build plate.
- Tips: Used clamps to hold the flex-plate and magnet against the build-plate for 72 hours. or set it down and stacked a heavy of stuff on top of the build plate for 48 hours to make sure the adhesive was good and stuck.
- Step 2: Before installing,We recommand to Print/install a z-axis spacer also get longer screws to keep the new assembly in place, reference (thingiverse: 4533310), it can avoid the build plate will impact the glass every time , reset your Z limit to account for the additional 2.6 mm, re-level your machine and you're golden!
- Several 3D printing youtubers have relevant videos you should watch before you try. After every printing, if did not stick, sanded your plate, Also use some steel wool (or suggest 150 - 400 grit sandpaper.) to scuff up the metal sheet to ensure adhesion for your prints.
- See more on Amazon...
Brand: Imdinnogo | Manufacturer: Imdinnogo
See On Amazon Similar To Imdinnogo BCZADM Resin Printing Flex
Looking For Something Else?
Search