Cabinet Clamps, Cabinetry Clamps Cabinet Face Frame Clamps Cabinet Installation Clamps Cabinet Tools with Two Side Screws and Alignment Plate, 2 Pack (Orange)
Asin: B0B9SBW7M1 | Model: 085-MDaKQi-O | PartNumber: 085-MDaKQi-O
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Accurate & Efficient Drill Holes.】The Built-In Drill Guide Will Automatically Help Us Lock The Position To Pre-Drill And Drill The Pilot Hole More Accurately And Effectively. Note: Be Sure That The Drill Guide Is In The Locked Position Before Drilling. Cannot Be Used On Cabinets Without The Lip Or Flush..
【Widely Applications.】This Cabinetry Clamp Could Definitely Does Its Job For All Types Of Cabinets Even You Are Not A Professional Installer. It Holds The Faces Together And Allows You To Get Them Level And Plumb And Even Has A Drill Guide To Assist You In Drilling Pilot Holes For Your Cabinet-To-Cabinet Fasteners..
【Easy To Use.】These Cabinetry Clamps Set Is Consistent, Time-Saving And Left No Damage To Align The Face Frames Of Both Cabinets More Easier And Faster. Note: Please Remember To Stick The Adhesive Pads Correctly To The Alignment Plate And Secondary Arms To Avoid Leaving Marks On The Faces Of The Cabinets..
【Rust-Proof & Sturdy Steel.】Made Of Primary Steel And With Steel Sliding T-Bars And An Aluminum Alignment Plate, The Cabinet Clamp’S Body And The Side Jaw Are Cast Steel For Long-Term Durability And Tightness. And Its Center Aluminum Alignment Plates Allow The Clamps To Align The Two Cabinet’S Face Frames Together From Front To Back..
Features
- Professional Specification. The cabinet clamps work on stiles from 1-1/2 inch to 2 inch thickness(each) with 4" opening capacity; Minimum Jaw Width: 2.95 Inch; Maximum Jaw Width: 5.3 Inch; Alignment Plate Depth: 1.25 to 1.5 Inch; Drill bit: 1/8 ; Drill hole: 1/4 . It comes with 3 felt pads for the clamp faces and alignment plate to avoid leaving marks on your cabinets.
- Rust-proof & Sturdy Steel. Made of primary steel and with steel sliding T-bars and an aluminum alignment plate, the cabinet clamp s body and the side jaw are cast steel for long-term durability and tightness. And its center aluminum alignment plates allow the clamps to align the two cabinet s face frames together from front to back.
- Accurate & Efficient Drill Holes. The built-in drill guide will automatically help us lock the position to pre-drill and drill the pilot hole more accurately and effectively. Note: Be sure that the drill guide is in the locked position before drilling. Cannot be used on cabinets without the lip or flush.
- Easy to Use. These cabinetry clamps set is consistent, time-saving and left no damage to align the face frames of both cabinets more easier and faster. Note: Please remember to stick the adhesive pads correctly to the alignment plate and secondary arms to avoid leaving marks on the faces of the cabinets.
- Widely Applications. This cabinetry clamp could definitely does its job for all types of cabinets even you are not a professional installer. It holds the faces together and allows you to get them level and plumb and even has a drill guide to assist you in drilling pilot holes for your cabinet-to-cabinet fasteners.
- See more on Amazon...
Brand: Sebupar | Manufacturer: Sebupar
Dimensions: 2.70 x 11.00 x 10.00 inches
See On Amazon Similar To Cabinet Clamps Cabinetry Clamps Cabinet
#1
90 Degree 5.5" Aluminum Corner Clamps for Woodworking - 4 Pack Positioning Clamping Squares for Boxes, Cabinets, Drawers
Asin: B09JNVVLBW | Model: 4Pack 5.5'' | PartNumber: 4Pack 5.5''
【Professional Woodworking Tool】Degree Positioning Squares Designed To Be Clamped To Most Kind Boxes To Assist With Squaring During Glue Up. Aluminum 90 Degree Positioning Squares Can Work With Clamping Tool To Check And Position The Corner For Wood Board Jointing To Gluing Up Or Welding At A Right Angle. Clamping Squares Aluminum Is Pretty Practical Tool To Make Your Woodworking Project Easier..
4 Pack Red Anodized Right Angle Clamps Tools For Woodworking.
14 X 14Cm Right Angle Corner Clamps Cabinet Clamp For Woodworking.
5.5X5.5Inch Solid Aluminum Alloy L-Type 90 Degree Positioning Squares.
【Easy Install And Use】Woodworking Carpenter Clamping Tool Put The Square On The Corner Of The Two Raw Materials That Need To Be Flattened And Fixed With A Set Of Clamps. 5.5 Inch Clamping Squares For Woodworking With Beveled Edges, Corner Clamps For Woodworking Can Be Easy To Work And Not Damage The Cutting Edges..
Corner Clamps For Woodworking Set Carpenter Tools Corner Clamps 90 Degree Right Angle Clamps.
【Furniture Widely Application】90 Degree Clamp Is Suitable For Diy Assembling Boxes, Drawers, Cabinets, Frames And Other Furnitures. L Shaped Woodworking Clamping Squares Plus & Csp Clamps Can Maintain A Perfect Square While Assembling Any Box Or Frame. Woodworking Square Clamping Square Also Can Be Used For Processing Outside Angel Corners, Metal Right Angels, Welding And Other Professional Operations..
90 Degree Clamping Squares For Woodworking Cabinet.
【Sturdy & Accurate】Clamping Square Plus Clamp Are Accurate And Helpful. 5.5" Aluminium Alloy L-Type Clamping Squares Plus & Csp Clamps Adopt Surface Treatment-Anodized, Carefully Manufactured Which Is Durable And Resistant To Corrosion. Woodworking Precision Clamping Square Is Strong And Accurate, Easy To Clamp And Don’T Stick On The Steel. Allow The Piece To Be Moved While The Clamps Are In Place. Using Clamp Square To Build Some Cabinets And They Works Beautifully..
Features
- ENOUGH QUANTITY WITH PERFECT SIZE 4 set 90 degree square clamps include 4pcs Positioning Squares and 4pcs csp clamps. Clamping squares for woodworking with 140mm scales for measuring length.5.5"Lx 5.5"Wx 0.67"H aluminum degree positioning squares fit for the wood board thickness up to 1- 9/16", it's the best size for woodworking.
- STURDY & ACCURATE Clamping square plus clamp are accurate and helpful. 5.5 Aluminium alloy L-Type clamping squares plus & csp clamps adopt surface treatment-anodized, carefully manufactured which is durable and resistant to corrosion. Woodworking precision clamping square is strong and accurate, easy to clamp and don t stick on the steel. Allow the piece to be moved while the clamps are in place. Using clamp square to build some cabinets and they works beautifully.
- PROFESSIONAL WOODWORKING TOOL Degree Positioning Squares Designed to be clamped to most kind boxes to assist with squaring during glue up. Aluminum 90 degree positioning squares can work with clamping tool to check and position the corner for wood board jointing to gluing up or welding at a right angle. Clamping squares aluminum is pretty practical tool to make your woodworking project easier.
- FURNITURE WIDELY APPLICATION 90 degree clamp is suitable for DIY assembling boxes, drawers, cabinets, frames and other furnitures. L shaped woodworking clamping squares plus & csp clamps can maintain a perfect square while assembling any box or frame. Woodworking square clamping square also can be used for processing outside angel corners, metal right angels, welding and other professional operations.
- EASY INSTALL AND USE Woodworking carpenter clamping tool put the square on the corner of the two raw materials that need to be flattened and fixed with a set of clamps. 5.5 inch clamping squares for woodworking with beveled edges, corner clamps for woodworking can be easy to work and not damage the cutting edges.
- Corner clamps for woodworking set Carpenter tools corner clamps 90 degree right angle clamps
- 14 x 14cm right angle corner clamps cabinet clamp for woodworking
- 5.5x5.5inch solid aluminum alloy L-Type 90 degree positioning squares
- 90 degree clamping squares for woodworking cabinet
- 4 pack red anodized right angle clamps tools for woodworking
- See more on Amazon...
Brand: WenCrew | Manufacturer: WenCrew
See On Amazon #2
WEN 10236F2 Quick-Adjust 36-Inch Steel Bar Clamps with 2.5-Inch Throat and Micro-Adjustment Handle, Two Pack , Multicolor
Asin: B07HFTYBNN | Model: 10236F2 | PartNumber: 10236F2 | Ean: 0044459102366 | UPC: 044459102366
Micro-Adjustment Knob Creates Additional Grip And Precision.
Includes Two Powerful F-Clamps For A Clamping Force Of Over 1200 Pounds Across Your Workpiece.
Non-Marring Pads Prevent Scratching And Scuffing To Your Projects.
Features A 36-Inch Steel Rail And A 2.5-Inch Throat.
Features
- Quick-adjust design: slide the clamp closed without pressing a single button
- Features a 36-inch steel rail and a 2.5-inch throat
- Micro-adjustment knob creates additional grip and precision
- Non-marring pads prevent scratching and scuffing to your projects
- Includes two powerful F-clamps for a clamping force of over 1200 pounds across your workpiece
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
Dimensions: 1.25 x 43.13 x 4.50 inches | Weight: 2.60 pounds
See On Amazon #3
WORKPRO 6" Mini Bar Clamps for Woodworking, One-Handed Clamp/Spreader, Light-Duty Screw-Change F Clamp with 50lbs Load Limit, 2PC
Asin: B0BXS8QJ9W | Ean: 0820909688600 | UPC: 820909688600
Quick-Clamp: The Quick-Release Latch Makes It So Easy To Take Them Off Your Project Or Adjusts The Fix In Seconds.
Solid Construction: A Great, Defined, Rail Construction Makes Sure The Clamps Do Not Slip And Tighten Very Effectively When Really Putting The Pressure On(Rated Up To 50Lbs). It Is Lightweight Yet Sturdy And Is Capable Of Holding Pressure For Extended Periods.
Non-Marring Pads: Larger Pads Provide A Larger Area Of Thrust Surface, More Balanced Force And Parallel Clamp. Non-Marring, Non-Slip Texture Protects Your Project.
Clamp & Spreader: The Screw-Release Button Design Allows The F Clamp To Be A Spreader. Just Release The Button By A Screw And Then Reverse It Before Fastening It, You Will Get The Spreader You Need.
Features
- 6" Clamps Set: The set contains 2 pieces of 6" bar clamps. The 6" clamp can be set to a spreader with sizes up to 7-7/8"
- Clamp & Spreader: The screw-release button design allows the f clamp to be a spreader. Just release the button by a screw and then reverse it before fastening it, you will get the spreader you need
- Quick-clamp: The quick-release latch makes it so easy to take them off your project or adjusts the fix in seconds
- Non-marring Pads: Larger pads provide a larger area of thrust surface, more balanced force and parallel clamp. Non-marring, non-slip texture protects your project
- Solid Construction: A great, defined, rail construction makes sure the clamps do not slip and tighten very effectively when really putting the pressure on(rated up to 50lbs). It is lightweight yet sturdy and is capable of holding pressure for extended periods
- See more on Amazon...
Brand: WORKPRO | Manufacturer: HANGZHOU GREATSTAR INDUSTRIAL CO.,LTD
See On Amazon #4
Milescraft 4009 Fence Clamps - 2 pack Universal Clamps with 3/8" Rod for Table Saws, Mitre Saws, Router Tables and Clamping Squares
Asin: B07CJHZ7QL | Model: 4009 | PartNumber: 4009 | Ean: 0737888400904 | UPC: 737888400904
Pplications: Use As Stop Blocks, Sacrificial Fences And Resaw Fences.
Includes: Two Universal Fence Clamps.
Premium Milescraft Tools: Lightweight, Rugged Material With Tpe Clamp Pad.
Premium Functionality: Range Of Travel 1/2″-5-3/4″ (12Mm To 146Mm).
Features
- UNIVERSAL FIT: Fits into a 3/8 hole in the top of the auxiliary fence
- PREMIUM FUNCTIONALITY: Range of travel 1/2 -5-3/4 (12mm to 146mm)
- PPLICATIONS: Use as stop blocks, sacrificial fences and resaw fences
- PREMIUM MILESCRAFT TOOLS: Lightweight, rugged material with TPE clamp Pad
- INCLUDES: Two Universal Fence Clamps
- See more on Amazon...
Brand: Milescraft | Manufacturer: Milescraft
Dimensions: 1.45 x 5.50 x 5.50 inches | Weight: 0.88 pounds
Warranty: 2 year
See On Amazon #5
Kreg KHI-Slide Drawer Slide Jig - Drawer Slide Jig Kit - Drawer Slide Tool - for Cabinets, Drawers, Desks & More - Easily Install Drawer Slides - Set of 2
Asin: B01L2T0IDQ | Model: KHI-SLIDE | PartNumber: KHI-SLIDE | Ean: 0735090165024, 0647096806644, 5024763174193, 0647096807337 | UPC: 647096806644, 735090165024, 647096807337
Works With Many Drawer Slides: Drawer Jig Aligns Undermount, Ball-Bearing, And Epoxy-Coating Slides.
Premium Kreg Tools: We Offer Products That Help Woodworkers Close The Gap Between Idea And Outcome.
Multipurpose Carpenter Tools: Works For Cabinets, Cases, Drawers, Desks, And More.
Eliminate Measuring: Kreg Jig Has Built-In Indexing Tabs To Precisely Align Drawer Slides And Drawers Without Measuring.
Features
- Premium Home Improvement Tool: Take the guesswork out of drawers with the Drawer Slide Jig; easily create level drawers that slide smoothly
- Eliminate Measuring: Kreg jig has built-in indexing tabs to precisely align drawer slides and drawers without measuring
- Works with Many Drawer Slides: Drawer jig aligns undermount, ball-bearing, and epoxy-coating slides
- Multipurpose Carpenter Tools: Works for cabinets, cases, drawers, desks, and more
- Premium Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome
- See more on Amazon...
First Available: 05/29/2017
Brand: KREG | Manufacturer: Kreg Tool Inc
Dimensions: 4.00 x 16.00 x 5.75 inches | Weight: 1.15 pounds
Warranty: EME4802772
See On Amazon #6
HORUSDY Band Clamp, Woodworking Frame Clamp Strap Holder for Picture Strap Clamp Strap Clamp
Asin: B07BW2T7YH | Model: T97348 | PartNumber: T97348
They Are Designed For Assembling Picture Frames, Drawers, Chair Frames Or Other Articles Of Various Sizes And Configurations Prior To Glueing Or Fixing..
The Corner Braces Can Be Removed If You Want To Use These On Irregular Shaped Objects..
Tension Is Maintained By Means Of A Handle Which Tightens The 4 Metre Long Woven Canvas Strap Linked To The Tensioning Unit..
Ideal For Use With Square, Round And Irregular Shaped Work Pieces , Such As Box, Picture Frame, Barrel Etc..
Features
- These are a 'must have' for any woodwork enthusiast.
- Ideal for use with square, round and irregular shaped work pieces , such as Box, Picture Frame, Barrel etc.
- They are designed for assembling picture frames, drawers, chair frames or other articles of various sizes and configurations prior to glueing or fixing.
- Tension is maintained by means of a handle which tightens the 4 metre long woven canvas strap linked to the tensioning unit.
- The corner braces can be removed if you want to use these on irregular shaped objects.
- See more on Amazon...
Brand: HORUSDY | Manufacturer: HORUSDY
Dimensions: 1.57 x 14.00 x 5.50 inches
See On Amazon #7
Cabinet Clamps 2 Pack - Protective Case Included - Claw Clamps for Cabinets, Cabinet Face Frame Clamps
Asin: B0BJQPMXZF | Model: cabinet clamps | PartNumber: cabinet clamps | Ean: 0850009189585 | UPC: 850009189585
𝐃𝐫𝐢𝐥𝐥 𝐆𝐮𝐢𝐝𝐞 - Equipped With A Pilot-Hole Drill Guide For More Precise Pre-Drilling, Which Can Be Flipped Out Of The Way To Drive In The Screw After The Pilot Hole Has Been Drilled..
𝐒𝐩𝐞𝐜𝐢𝐟𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬 - The Clamps Are Designed To Work On Stiles Up To 1-1/4 In. Thick; They Have A 4" Clamp Capacity, A 2" Jaw, And A Clamping Force Of 300-600 Lbs.
𝐂𝐚𝐬𝐞 & 𝐅𝐞𝐥𝐭 𝐏𝐚𝐝𝐬 - The Accompanying Felt Pads For Clamp Faces And Alignment Plate Will Protect And Cushion The Points Of Contact With Your Cabinet..
𝐏𝐫𝐚𝐜𝐭𝐢𝐜𝐚𝐥𝐢𝐭𝐲 - Manram Cabinet Clamps Integrate Several Processes Of Installing Face Frame Cabinets Into Just One Straightforward Operation..
Features
- - Manram Cabinet Clamps are high-quality, long-lasting clamps that come ready to tighten, align, pre-drill, and secure your cabinet stile, all without changing clamp positions or taking it off. It comes with two (2) high performance face frame clamps, protective case, and felt pads.
- - Manram Cabinet Clamps integrate several processes of installing face frame cabinets into just one straightforward operation.
- - Equipped with a pilot-hole drill guide for more precise pre-drilling, which can be flipped out of the way to drive in the screw after the pilot hole has been drilled.
- & - The accompanying felt pads for clamp faces and alignment plate will protect and cushion the points of contact with your cabinet.
- - The clamps are designed to work on stiles up to 1-1/4 in. thick; they have a 4 clamp capacity, a 2 jaw, and a clamping force of 300-600 lbs
- See more on Amazon...
Brand: manram | Manufacturer: Manram
See On Amazon #8
E-TING 6Pack Toggle Clamp Latch 100KG 220LBS Holding Capacity 4001Pull Latch Clamps Black Adjustable Quick Release Hasp Clamps for Smoker Cabinet Boxes Case Trunk Jig, Metal Toggle Latch Catch Set
Asin: B0C7BGH1Y9 | Model: SKU10789 | PartNumber: SKU10789
【Easy To Install】Small Size, Easy To Install, Just Fix The Pull Latch On The Gate Or Case With Screws. Even If You Install It Little Bit Away Or Close, You Could Always Adjust The Screw And Make It Tight Or Loose..
【Widely Usage】 Draw Latches Are Widely Used For Cabinet, Door, Box, Case With No Lock Or Broken Handles, Perfectly Fit For Small Tools In Homes, Offices, Restaurants And Factories, Such As Smoker Box Covers, Jeep Bumpers, Sliding Doors, Tool Boxes, Making Jigs, Tool Fixtures,Gate Latches..
【Adjustable Toggle Clamp Black】Installation Distance Could Be Adjusted By Adjustable Pull Bar.Tighten The Tension Hook For Maximum Tightness..
【220Lbs Toggle Clamp Latch】4001 Style Toggle Latch Clamp, Metal Latch Handle And Lever Fastener, Ideal Small Pull Gate Latch For Smoker, Trailer, Trunk And Cabinet. The Latch Is Lockable And The Diameter Of The Lock Hole Is 5 Mm/ 0.19 Inch..
Features
- Best Sellection Our package include 6Pack adjustable toggle clamp latch and 24PCS screws, well-chosen, all screws you needed to install the heavy duty toggle latches are included.
- 220lbs Toggle Clamp Latch 4001 Style Toggle Latch Clamp, metal latch handle and lever fastener, ideal small pull gate latch for smoker, trailer, trunk and cabinet. The latch is lockable and the diameter of the lock hole is 5 mm/ 0.19 inch.
- Easy to Install Small size, easy to install, just fix the pull latch on the gate or case with screws. Even if you install it little bit away or close, you could always adjust the screw and make it tight or loose.
- Adjustable Toggle Clamp Black Installation distance could be adjusted by adjustable pull bar.Tighten the tension hook for maximum tightness.
- Widely Usage Draw latches are widely used for cabinet, door, box, case with no lock or broken handles, perfectly fit for small tools in homes, offices, restaurants and factories, such as smoker box covers, jeep bumpers, sliding doors, tool boxes, making jigs, tool fixtures,gate latches.
- See more on Amazon...
Brand: E-TING | Manufacturer: E-TING
See On Amazon #9
EONMIR 4 Pack Windproof Stop Protect Clips, Shower Splash Guard Curtain Clip, Self Adhesive Shower Curtain Clips Splash (White)
Asin: B073RZVMNH | Model: 8541787330 | PartNumber: 8541787330 | Ean: 0730060132952 | UPC: 730060132952
Material: Matte Surface, The High Quality Tape Keeps The Clip On The Wall..
Suitable For Cloth Shower Curtains And Fabric Shower Curtains. The Shower Curtain/Liner Needs To Be Thick In Order For It To Stay In..
These Handy Clips Hold Shower Curtain Liners Against The Wall, Keeping Water From Splashing Out Onto The Floor..
Design: Installation Is Very Simple, No Tools To Install, You Only Need To Peel After The Paste Can Be..
Features
- Advantage: Simple and effective clip holding a safe shower curtain on the wall.
- Design: Installation is very simple, no tools to install, you only need to peel after the paste can be.
- Material: Matte Surface, The high quality tape keeps the clip on the wall.
- These handy Clips hold shower curtain liners against the wall, keeping water from splashing out onto the floor.
- Suitable for cloth shower curtains and fabric shower curtains. The shower curtain/liner needs to be thick in order for it to stay in.
- See more on Amazon...
Brand: EONMIR | Manufacturer: EONMIR
Dimensions: 0.50 x 5.00 x 4.50 inches | Weight: 0.09 pounds
See On Amazon #10
KUKUMAO 5000K Plug-in LED Tube Light Fixture, 18W Linkable Cabinet Light for Garage, Kitchen, Bathroom, Closet, Office - 2Ft, Triproof, White
Asin: B08LVY62Y3 | Model: LQ-SF1860-A1 | PartNumber: LQ-SF1860-A1 | Ean: 3388098046313
【Easy Installation】This Led Shop Light Can Be Easily Fixed With The Stainless Steel Mounting Clamps, Which Can Be Positioned Freely On The Lamp，The Package Include Power Cord With On/Off Switch Can Help You Install By Plug And Play, You Can Also Use The Plug Input Cable To Connect Your Power Line To Get Extension Cord Or Lighting The Led Tube Light By The Plug To Satisfied Your Need..
【Long Lifetime And Warranty Service】Fcc / Rohs Certification, The Average Life Of The Led Garage Ceiling Lamps Is Up To 30,000 Hours. In Addition, The Led Workshop Lamp Has A 3-Year Warranty,If You Have Further Questions About The Led Workshop Light Fixture , Please Feel Free To Contact Us!.
【Widely Used】Upgrade Ip66 Led Shop Lights With Plug, Definitely A Good Choice For Indoors Or Outdoors. 180° Wide Beam Angle And 160 Pieces Of Lamp Beads Provide A Wide Illumination Range. Ideal For Both Residential, Commercial, And Industrial Lighting, Such As Bathroom, Bedroom, Kitchen, Corridor, Garage, Office, Shop, And Supermarket..
【Linkable And No Flicker】This Led Tube Light Could Connect Up To 18 Tube Lights Together With 19.6 Inches Connector Cords. Comfortable Led Shop Light Fixture. With 180° Wide-Angle Beam, This Led Ceiling And Closet Light Is No Flickering..
Features
- SUPER BRIGHT AND ENERGY SAVING More than 1800 lumens output and 5000K bright white temperature for smooth light everywhere, This led shop light fixture is 18w low power and saves 85% on your electricity bill, perfect for garage, under cabinet, workshop, workbench, kitchens, hallways, schools, laundry room, utility room, and recreation rooms, office general lighting.
- LINKABLE AND NO FLICKER This led tube light could connect up to 18 tube lights together with 19.6 inches connector cords. comfortable led shop light fixture. With 180 wide-angle beam, This led ceiling and closet light is no flickering.
- EASY INSTALLATION This led shop light can be easily fixed with the stainless steel mounting clamps, which can be positioned freely on the lamp The package include power cord with on/off switch can help you install by PLUG AND PLAY, you can also use the plug input cable to connect your power line to get extension cord or lighting the led tube light by the plug to satisfied your need.
- WIDELY USED Upgrade IP66 led shop lights with plug, definitely a good choice for indoors or outdoors. 180 wide beam angle and 160 pieces of lamp beads provide a wide illumination range. Ideal for both residential, commercial, and industrial lighting, such as bathroom, bedroom, kitchen, corridor, garage, office, shop, and supermarket.
- LONG LIFETIME AND WARRANTY SERVICE FCC / ROHS certification, the average life of the LED garage ceiling lamps is up to 30,000 hours. In addition, the LED workshop lamp has a 3-year warranty,If you have further questions about the led workshop light fixture , Please Feel Free to contact Us!
- See more on Amazon...
Brand: KUKUMAO | Manufacturer: KUKUMAO
Dimensions: 1.18 x 23.60 x 2.55 inches | Weight: 1.00 pounds
Warranty: 3 years.
See On Amazon #11
E-TING Hand Tool 201B Toggle Clamp 198Lbs Antislip Red Horizontal Clamp 201-B Quick Release Tool (4)
Asin: B01BR75WFW | Model: 4xSKU10645#4 | PartNumber: 4xSKU10645#4
Material: Cold-Rolled Carbon Steel With Zinc Plated Coating For Corrosion Resistance; Oil And Stain Resistant Red Vinyl Solid Hand Grips, Complete With Adjustable Rubber Pressure Tips.
Application: A Rock-Solid Grip To Install On Jigs, Tool Fixtures, Or Movable Bases.
Design: Low Height Design. Retracted Clamp Will Allow For Vertical Removal Of Clamped Item, Mechanism Allows Maximum Clearance.
Size: Approx. 9.5 X 6.5 X 3.8Cm/ 3.7" X 2.56" X 1.5" (L*W*H). Holding Capacity Force: 198 Lbs..
Features
- Package Included: pcs E-TING GH-201B horizontal quick release toggle clamp
- Size: approx. 9.5 x 6.5 x 3.8cm/ 3.7 x 2.56 x 1.5 (L*W*H). Holding capacity force: 198 lbs.
- Material: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance; Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips
- Design: Low height design. Retracted clamp will allow for vertical removal of clamped item, mechanism allows maximum clearance
- Application: A rock-solid grip to install on jigs, tool fixtures, or movable bases
- See more on Amazon...
Brand: E-TING | Manufacturer: E-TING
Dimensions: 3.74 x 5.91 x 1.42 inches | Weight: 1.15 Pounds
See On Amazon #12
POWERTEC 4PK Toggle Clamp, 500 lbs Holding Capacity, 225D Quick Release Horizontal Clamps w/ Antislip Rubber Pressure Tip for Woodworking Jigs and Fixtures, Welding, Drill Press, Crosscut Sled (20326)
Asin: B079SWJC4W | Model: 20326 | PartNumber: 20326 | Ean: 0843441100881 | UPC: 843441100881
Premium Design: A Hold Down Toggle Clamp Constructed From Cold-Rolled Carbon Steel, Possessing A Low Height Design, A Pressure Adapter For Easy Depth Adjustment And Maximum Clearance.
Specs: Base 1-3/8” X 1-1/2” | Mounting Slots 1/4” X 3/8” Spaced 7/8” X 7/8” | Bolt Length, Including Rubber Foot: 2-1/2”.
Holding Capacity: Toggle Clamp Can Hold Up To 500 Lbs..
Function: An Essential Hand Tool And Addition To Your Jig Assembly, Delivering A Dependable And Secure Non-Slip Grip On Your Work Pieces, Jigs And Fixtures.
Features
- INCLUDES: (4) Horizontal quick release toggle clamp (Type-225D)
- FUNCTION: An essential hand tool and addition to your jig assembly, delivering a dependable and secure non-slip grip on your work pieces, jigs and fixtures
- PREMIUM DESIGN: A hold down toggle clamp constructed from cold-rolled carbon steel, possessing a low height design, a pressure adapter for easy depth adjustment and maximum clearance
- HOLDING CAPACITY: Toggle clamp can hold up to 500 lbs.
- SPECS: Base 1-3/8 x 1-1/2 | Mounting slots 1/4 x 3/8 spaced 7/8 x 7/8 | bolt length, including rubber foot: 2-1/2
- See more on Amazon...
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 3.00 x 6.00 x 6.00 inches
See On Amazon #13
Jorgensen 24" One Hand Clamp/Spreader - 2-pack, Medium Duty, E-Z Hold Bar Clamps Set
Asin: B07K9ZV8MZ | Ean: 0044295934244 | UPC: 044295934244
One-Handed Clamp- These Bar Clamps Combine The Speed And Ease Of Single-Handed Use, With 3-1/3 Inch Reach, And Are Furnished With Soft And Durable Plastic Pads. As A “Standard,” Quick-Acting, One-Handed Clamp, The Patented, Innovative Sliding Head Maintains Substantially Higher Clamping Forces..
Suitable For A Wide Range Of Woodworking..
Features- The Contoured Comfort Grip And Quick-Release Lever Make It Simple To Get A Firm Grip In A Flash. The Unique In-Line Advancing Handle Provides Comfort And Ease Of Use, Permitting More Significant Travel Per Squeeze. These Special Bar Clamps Are Some Of Our Easiest-To-Use Clamps And Are Ideal For Hobby, Craft, And Model Projects..
E-Z Hold Ii Design- These Versatile Clamps Can Be Easily Converted Into Spreader Clamps And Allow Two Clamps To Join To Make A Clamp With More Than Double The Opening Capacity Of A Single Clamp..
Features
- Primary Parameter- Max opening: 24 ; Load limit: 300 lbs; Reach: 3-1/3 from the edge of the bar to center-line of the screw; Advancing handle: glass-filled nylon; Bar: 1/4 *3/4 plated, round-edge, high-carbon steel.
- E-Z HOLD II Design- These versatile clamps can be easily converted into spreader clamps and allow two clamps to join to make a clamp with more than double the opening capacity of a single clamp.
- One-Handed Clamp- These bar clamps combine the speed and ease of single-handed use, with 3-1/3 inch reach, and are furnished with soft and durable plastic pads. As a standard, quick-acting, one-handed clamp, the patented, innovative sliding head maintains substantially higher clamping forces.
- Features- The contoured comfort grip and quick-release lever make it simple to get a firm grip in a flash. The unique in-line advancing handle provides comfort and ease of use, permitting more significant travel per squeeze. These special bar clamps are some of our easiest-to-use clamps and are ideal for hobby, craft, and model projects.
- Suitable for a wide range of woodworking.
- See more on Amazon...
Brand: Jorgensen | Manufacturer: HANGZHOU GREATSTAR INDUSTRIAL CO. LTD
See On Amazon #14
Jorgensen 6" One Hand Clamp/Spreader, 300 Lbs Clamping Force, E-Z Hold Bar Clamps Set, Medium Duty, 2-pack
Asin: B01H63VLPG | Ean: 0044295934060 | UPC: 044295934060
The E-Z Hold Design Allows Two-Way Using——Clamp Or Spreader. And The Exclusive Patented Feature Lets You Join Two Clamps Together To Create A Clamp With More Than Double The Opening Capacity Of A Single Clamp With No Tools Or Added Accessories Needed..
Suitable For A Wide Range Of Woodworking & Diy Projects..
As A Standard, Quick-Acting Clamp, The Patented And Innovative Sliding Head Maintains Substantially Higher Clamping Forces Up To 300 Lbs. The Unique In-Line Advancing Handle Provides Comfort And Ease Of Use And Permits More Significant Travel Per Squeeze..
High-Carbon Steel Bar And Glass-Filled Nylon Handle Make It Solid And Durable. The Contoured Comfort Grip And Quick-Release Lever Make It Simple To Get A Firm Grasp. Deep-Reach Pads Help Protect Your Work..
Features
- The throat depth is 3-3/8 inch, the maximum opening capacity is 6 inches, and the standard load limit is 300 lbs.
- High-carbon steel bar and glass-filled nylon handle make it solid and durable. The contoured comfort grip and quick-release lever make it simple to get a firm grasp. Deep-reach pads help protect your work.
- The E-Z hold design allows two-way using clamp or spreader. And the exclusive patented feature lets you join two clamps together to create a clamp with more than double the opening capacity of a single clamp with no tools or added accessories needed.
- As a standard, quick-acting clamp, the patented and innovative sliding head maintains substantially higher clamping forces up to 300 lbs. The unique in-line advancing handle provides comfort and ease of use and permits more significant travel per squeeze.
- Suitable for a wide range of woodworking & DIY projects.
- See more on Amazon...
Brand: Jorgensen | Manufacturer: HANGZHOU GREATSTAR INDUSTRIAL CO. LTD
See On Amazon #15
PONY 4-Pack Cabinet Clamps, 8510 Cabinet Claw, Face Frame Clamps for Installing Cabinets, 440 lbs Load Limited Orange
Asin: B09XM2BC5V | Model: 8510 | PartNumber: 8510
【Pilot-Hole Drill】 There Is A Pilot-Hole Drilling Guide On One End. The Guide Flips Out Of The Way So You Can Drive Screws To Connect The Cabinets Without Removing Or Repositioning The Clamp..
【Professional】Professional, Quality Installation Is Achieved At A Fraction Of The Time Compared To The Use Of More Conventional Clamps..
【Protection Pads】 Comes With 4 Sets Of Protective Rubber Pads To Cushion And Protect Cabinetry. Face Frame Stiles Can Be Tightened, Aligned, Pre-Drilled And Fastened While The Clamp Remains In Its Original Position..
【Dimensions】 Works On Stiles From 1-1/2 Inch To 2 Inch; Throat Depth: 1-1/2 Inch; Minimum Opening: 2 Inch; Maximum Opening Capacity: 4-3/8 Inch; Jaw Width: 2 Inch; Jaw Width: 2-7/16 Inch. Max Load Capacity: 440 Lbs..
Features
- PONY 8510 Cabinet Claw Complete your cabinetry projects in a fraction of the time with Pony cabinet claw. This unique and patented tool combines the various steps of face-frame cabinet installation into one easy process.
- Dimensions Works on stiles from 1-1/2 inch to 2 inch; Throat Depth: 1-1/2 inch; Minimum Opening: 2 inch; Maximum Opening Capacity: 4-3/8 inch; Jaw Width: 2 Inch; Jaw Width: 2-7/16 inch. Max load capacity: 440 lbs.
- Pilot-Hole Drill There is a pilot-hole drilling guide on one end. The guide flips out of the way so you can drive screws to connect the cabinets without removing or repositioning the clamp.
- Protection Pads Comes with 4 sets of protective rubber pads to cushion and protect cabinetry. Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position.
- Professional Professional, quality installation is achieved at a fraction of the time compared to the use of more conventional clamps.
- See more on Amazon...
Brand: PONY | Manufacturer: HANGZHOU GREATSTAR INDUSTRIAL CO.,LTD
See On Amazon #16
PONY 2-Pack 50 Wood Gluing Pipe Clamp Fixture for 3/4 Inch Black Pipe
Asin: B09XM2TSWS | Ean: 0044295992183 | UPC: 044295992183
【Iron Cast Material】 Made Of Tough Iron Cast, Equipped With Multiple-Disc Clutch For High Clamping Pressure, Providing Quick And Secure Adjustment. Removing The Clamps When The Job Is Done Is Quick And Easy Every Time..
【Professional】 With The Help Of Pipe Clamps, Professional And Efficient Woodworking Operation Can Be Achieved In A Fraction Of The Time..
【Easy To Use】 Adjust The Ergonomic Handle To Strengthen The Clamping Force And Add A Coil Spring To Prevent Clamps From Slipping. Easy To Assemble, Ideal For Woodworking With A Wide Range Of Applications From Industrial To Do-It-Yourself Type Projects..
【Wide Applications】 Pony Sturdy Pipe Clamps For Woodworking Are Great For Almost Any Length Of Woodworking Project. The Big Clamping Face Is Suitable For More Woodworking Projects. The Clamping Face Is 1-3/4"..
Features
- PONY 3/4 Pipe Clamps Great for 3/4 with any length of black pipe. Our wood clamps are professional to clamp heavy duty work, which can release hands and help you work more efficiently.
- Wide Applications PONY sturdy pipe clamps for woodworking are great for almost any length of woodworking project. The big clamping face is suitable for more woodworking projects. The clamping face is 1-3/4.
- Iron Cast Material Made of tough iron cast, equipped with multiple-disc clutch for high clamping pressure, providing quick and secure adjustment. Removing the clamps when the job is done is quick and easy every time.
- Easy to Use Adjust the ergonomic handle to strengthen the clamping force and add a coil spring to prevent clamps from slipping. Easy to assemble, ideal for woodworking with a wide range of applications from industrial to do-it-yourself type projects.
- Professional With the help of pipe clamps, professional and efficient woodworking operation can be achieved in a fraction of the time.
- See more on Amazon...
Brand: PONY | Manufacturer: HANGZHOU GREATSTAR INDUSTRIAL CO.,LTD
See On Amazon #17
Laserjamb FastCap Little Hand HD 3rd Hand Support System, Set of 2, 16.5-Inch to 22.8-Inch, Rubber, Multicolor, 3HAND14
Asin: B000067S13 | Model: 3HAND14 | PartNumber: 3HAND14 | Ean: 0784497190030, 0663807980199, 7241870569256 | UPC: 663807980199, 784497190030
Fully Articulated Ends.
Includes 2 Supports.
Textured Rubber Pads For Gripping.
Action Lever For Secure Pressure, With Quick Release.
Features
- Range of 16.5 to 22.8 inches
- Action lever for secure pressure, with quick release
- Fully articulated ends
- Textured rubber pads for gripping
- Includes 2 supports
- See more on Amazon...
Brand: FastCap | Manufacturer: Laserjamb
Dimensions: 9.00 x 22.80 x 5.00 inches | Weight: 4.90 pounds
Warranty: No
See On Amazon #18
True Position Tools The Original Cabinet Hardware Jig - Made in USA - Most Accurate Tool for Knobs and Pulls - Hand Calibrated
Asin: B003E46SVO | Model: TP-1934 | PartNumber: TP-1934 | Ean: 0784497049437, 0723434579194, 7566908099537, 0797734709124, 0735090434113, 5272003746635 | UPC: 797734709124, 735090434113, 723434579194, 784497049437
𝗙𝗔𝗦𝗧 𝗔𝗡𝗗 𝗘𝗔𝗦𝗬 𝗧𝗢 𝗨𝗦𝗘 - Tighten Thumb Screws, Hold, And Drill. No Clamps Or Marking Needed. Take The Stress Out Of Installing Hardware On Your Cabinets. Fully Adjustable And Reversible Drill Template, Set Once And Repeat. Also Installs Shelf Pin Holes And Hinge Plates!.
𝗟𝗜𝗙𝗘𝗧𝗜𝗠𝗘 𝗪𝗔𝗥𝗥𝗔𝗡𝗧𝗬 - Family-Owned & Operated For 25 Years, We Build Tools That Stand Up To The Daily Use Of A Professional. Your Jig Includes Lifetime Bushing Warranty And Free Replacement For 60 Days If The Jig Is Not Absolutely Perfect. Proudly Made In The Usa..
𝗔𝗩𝗢𝗜𝗗 𝗖𝗢𝗦𝗧𝗟𝗬 𝗠𝗜𝗦𝗧𝗔𝗞𝗘𝗦 - We Use The Highest Quality Materials And Aerospace Precision Machining So That Your Knobs Or Pulls Are Placed Exactly Where You Want Them. Pays For Itself After One Install. Counterfeit Jigs May Look The Same, But Cannot Mimic Our Extreme Accuracy..
𝗧𝗛𝗘 𝗢𝗡𝗟𝗬 𝗝𝗜𝗚 𝗙𝗢𝗥 𝗦𝗛𝗔𝗞𝗘𝗥 𝗖𝗔𝗕𝗜𝗡𝗘𝗧𝗦 - Accurately Install Handles Or Knobs On Any Cabinet Door And Drawer Front. Patent Pending Shaker Spacers Provide Stability When Drilling Recessed (Shaker Style) Drawer Fronts..
Features
- - Patent pending True Calibration system with Perfect Match laser engraved rulers. Made and hand calibrated in California. DIY simplicity with professional durability.
- - Accurately install handles or knobs on any cabinet door and drawer front. Patent pending shaker spacers provide stability when drilling recessed (shaker style) drawer fronts.
- - Tighten thumb screws, hold, and drill. No clamps or marking needed. Take the stress out of installing hardware on your cabinets. Fully adjustable and reversible drill template, set once and repeat. Also installs shelf pin holes and hinge plates!
- - We use the highest quality materials and aerospace precision machining so that your knobs or pulls are placed exactly where you want them. Pays for itself after one install. Counterfeit jigs may look the same, but cannot mimic our extreme accuracy.
- - Family-owned & operated for 25 years, we build tools that stand up to the daily use of a professional. Your jig includes lifetime bushing warranty and free replacement for 60 days if the jig is not absolutely perfect. Proudly made in the USA.
- See more on Amazon...
Brand: True Position Tools | Manufacturer: True Position Tools
Dimensions: 2.76 x 17.32 x 11.42 inches | Weight: 2.20 Pounds
See On Amazon #19
Bessey BES8511 Face Frame Clamp Pair
Asin: B073RR4JPF | Model: BES8511x2-1 | PartNumber: BES8511x2-1 | Ean: 0725703608154 | UPC: 725703608154
Equipped With Pilot-Hole Drill Guide That Can Be Flipped Out Of The Way To Drive In The Screw Once The Pilot Hole Is Drilled..
Comes With Non-Marring Felt Pads For Clamp Faces And Alignment Plate To Protect And Cushion The Points Of Contact On Your Cabinet..
Clamp Specifications: Works On Stiles Up To 1-1/4 In. Thick; 4" Clamp Capacity; 2" Jaw; Clamping Force Of 300 - 600 Lbs..
Tighten, Align, Pre-Drill And Fasten Your Cabinet Stile, All Without Having To Re-Position Or Remove Your Clamp!.
Features
- Includes two (2) BES8511 Face Frame Cabinetry Clamps
- Tighten, align, pre-drill and fasten your cabinet stile, all without having to re-position or remove your clamp!
- Equipped with pilot-hole drill guide that can be flipped out of the way to drive in the screw once the pilot hole is drilled.
- Clamp specifications: works on stiles up to 1-1/4 in. thick; 4 clamp capacity; 2 jaw; clamping force of 300 - 600 lbs.
- Comes with non-marring felt pads for clamp faces and alignment plate to protect and cushion the points of contact on your cabinet.
- See more on Amazon...
Brand: Bessey | Manufacturer: Bessey
Dimensions: 3.00 x 10.00 x 6.00 inches | Weight: 2.00 Pounds
See On Amazon
Looking For Something Else?
Search