LS Swap Gauge Adapter Master Kit, SBC to LS Engine Swap Bracket Set & Gen 3 Billet Valley Pan Cover Plate
Asin: B0BB4P2MF6
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Gen Iii Ls Valley Pan Compatible With All Gen Iii Engine Blocks.
Made In Wichita, Ks From Aerospace Grade, Usa Produced Billet Aluminum.
Includes: M16-1.5 Male To 1/8" Npt (Oil Pressure), M16-1.5 Male To 1/4" Npt (Oil Pressure), M12-1.5 Male To 1/8" Npt (Coolant Temperature Sensor), M12-1.5 Male To 3/8" Npt (Coolant Temperature Sensor), Extended Length M12-1.5 Male To 3/8" Npt (Coolant Temperature Sensor), M12-1.5 Male To 1/2" Npt (Coolant Temperature Sensor), 2 Adapter Plates With 8 Flat Head Bolts & 6 Flange M10-1.5 Bolts, And 1 Gen Iii Ls Valley Pan With Stainless Steel Bolts.
Ls Engine Swap / Engine Mount Brackets Will Move The Crankshaft Centerline Up .17" In The Vehicle.
Features
- Take out all the guess work and have an adapter for any situation when swapping an LS engine
- LS Engine Swap / Engine Mount Brackets will move the crankshaft centerline up .17 in the vehicle
- Gen III LS Valley Pan Compatible With All Gen III Engine Blocks
- Includes: M16-1.5 male to 1/8 NPT (oil pressure), M16-1.5 male to 1/4 NPT (oil pressure), M12-1.5 male to 1/8 NPT (coolant temperature sensor), M12-1.5 male to 3/8 NPT (coolant temperature sensor), extended length M12-1.5 male to 3/8 NPT (coolant temperature sensor), M12-1.5 male to 1/2 NPT (coolant temperature sensor), 2 adapter plates with 8 flat head bolts & 6 flange M10-1.5 bolts, and 1 Gen III LS Valley Pan with stainless steel bolts
- Made in Wichita, KS from aerospace grade, USA produced billet aluminum
- See more on Amazon...
Brand: ICT Billet
See On Amazon Similar To LS Swap Gauge Adapter Master
#1
LS Engin Swap Oil Pressure Sensor Adapter M16 1.5 Adapter to 1/8 NPT for All GM LS Engines LS1 LSX LS3 4.2L 4.3L 4.8L 5.3L 6.0L 6.2L
Asin: B0894LDF76 | Model: M16 1.5 TO 1/8 NPT | PartNumber: M16 1.5 TO 1/8 NPT
Male M16-1.5 And Female 1/8" Npt ,1/8" Npt Taper Pipe Thread Port In The Rear Of The Fitting Allows For Common Sensors Or Plumbing Fittings..
Package Listing : 1 Adapter & 1 Sealing Washer.
Our Adapter Installs Most Commonly In The Top-Rear, Or Front-Driver Side Of The Engine Block To Access Pressurized Oil Of The Engine. Seals To The Block With A Sealing Washer. Also You Can Use This To Adapt A Mechanical Oil Pressure Gauge On Your Ls Swap..
Larlansz Precision Threads Never Leaked. Fits Perfectly And Has A Great Seal.Manufactured From High Quality Aluminum,Good Oxidation And Corrosion Resistance,It's Does What It's Supposed To..
Features
- Compatible with: all GM LS Series Engines
- Larlansz Precision threads never leaked. Fits perfectly and has a great seal.Manufactured from high quality aluminum,good oxidation and corrosion resistance,it's does what it's supposed to.
- Male M16-1.5 and Female 1/8 NPT ,1/8 NPT taper pipe thread port in the rear of the fitting allows for common sensors or plumbing fittings.
- Our adapter installs most commonly in the top-rear, or front-driver side of the engine block to access pressurized oil of the engine. Seals to the block with a sealing washer. Also You can use this to adapt a mechanical oil pressure gauge on your LS swap.
- Package listing : 1 adapter & 1 sealing washer
- See more on Amazon...
Brand: Larlansz | Manufacturer: G·PEH
Dimensions: 0.71 x 0.98 x 0.79 inches
See On Amazon #2
Oil Pressure Sensor Adapter for GM LS Series Engines LS1 LSX LS3 5.3L 6.0L 6.2L M16 1.5
Asin: B0C48B5D6M | Ean: 0705888599683 | UPC: 705888599683
Made Of Premium 304 Stainless Steel Provides High Corrosion Resistance And Crack Resistance, Ensuring Service Life And Durability..
For Any Reason, If You Are Not Satisfied With Your Purchase, Please Contact Us Directly. We Offer A Year's Guarantee..
Installed On The Top Back Or Front Drive Side Of The Engine Block To Obtain Pressurized Oil For The Engine..
Featuring A Sturdy, Threaded Design With A Male M16-1.5 And Female 1/8" Npt Ls Engine Swap Oil Pressure Sensor Adapter..
Features
- Compatible with all GM LS series engines.
- Featuring a sturdy, threaded design with a male M16-1.5 and female 1/8 NPT LS engine swap oil pressure sensor adapter.
- Made of premium 304 stainless steel provides high corrosion resistance and crack resistance, ensuring service life and durability.
- Installed on the top back or front drive side of the engine block to obtain pressurized oil for the engine.
- For any reason, if you are not satisfied with your purchase, please contact us directly. We offer a year's guarantee.
- See more on Amazon...
Brand: joytrace | Manufacturer: joytrace
Dimensions: 0.98 x 1.02 x 0.98 Inches
Warranty: 12-Month Warranty
See On Amazon #3
iBrightstar 50W 6ohm Load Resistors for Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code
Asin: B07HF47RV9 | Ean: 0710825806144 | UPC: 710825806144
Notice! Load Resistors Heat Up Like Light Bulbs And Get Super Hot When Working. Make Sure You Mount Them Away From Any Wires Or Plastic..
Easy Installation. Just Connect The Wires With The Splice Taps Provided And No Wire Cutting Is Necessary..
One Resistor Is Required For Each Turn Signal Bulb Or Each License Plate Light Bulb..
Prevent Led Turn Signal Lights Or License Plate Brake Lights From Hyper Flashing, Malfunction Or Trigger Warning Message On Dashboard..
Features
- 2PCS 50W 6ohm Load Resistors + 4PCS Quick wire Clip.
- Prevent LED Turn Signal Lights or License Plate Brake Lights from hyper flashing, malfunction or trigger warning message on dashboard.
- NOTICE! Load Resistors heat up like light bulbs and get super HOT when working. Make sure you mount them away from any wires or plastic.
- One resistor is required for each turn signal bulb or each license plate light bulb.
- Easy installation. Just connect the wires with the splice taps provided and no wire cutting is necessary.
- See more on Amazon...
Brand: iBrightstar | Manufacturer: iBrightstar
Dimensions: 0.61 x 1.97 x 1.10 inches | Weight: 0.05 Pounds
See On Amazon #4
ICT Billet SBC Vehicle to LS Engine - Motor Mount Adapter Plate - Universal Swap Bracket Small Block LS Conversion Adjustable LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 Billet 551628
Asin: B00JU7LQ8Y | Model: 551628 | PartNumber: 551628 | Ean: 0682384790090 | UPC: 682384790090
Made In Wichita, Kansas From Aerospace Grade, Usa Produced, 3/8" Billet Aluminum.
Natural Aluminum Finish.
Includes: 2 Adapter Plates, 8 Flat Head Bolts, And 6 Flange M10-1.5 Bolts (Plates Are M10 Threaded, Use The Hardware Included).
These Plates Will Move The Crankshaft Centerline Up .17" In The Vehicle.
Features
- Made with OEM specifications for the best possible fitment into your vehicle
- These plates will move the crankshaft centerline up .17 in the vehicle
- Made in Wichita, Kansas from aerospace grade, USA produced, 3/8 billet aluminum
- Includes: 2 adapter plates, 8 flat head bolts, and 6 flange M10-1.5 bolts (plates are M10 threaded, use the hardware included)
- Natural aluminum finish
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.00 x 8.00 x 5.00 Inches
See On Amazon #5
Nilight 2PCS 12FT SAE to SAE Extension Cable DC Extension Cord 16AWG 2 Pin Wire Harness with 12V-24V Quick Connect/Disconnect SAE Connector with Dust Cap, 2 Years Warranty (50037R-B)
Asin: B0824S27JB | Model: 50037R-B | PartNumber: 50037R-B | Ean: 0781621091454 | UPC: 781621091454
Main Purpose: Designed To Extend And Maintain Most Battery Chargers With Sae Quick Release Connectors. Has A Wide Range Application In Daily Use Of Battery Tenders, Projects Of Motorcycles, Trucks, Solar Panels, Rvs And Cars.
Package Include: 12Ft 16Awg Sae Extension Cable, 2 Years Warranty.
Fit Type: Universal Fit. 2 Years Warranty Honored By Nilight..
High Protection: Each Sae Connector Comes With Dust Cap To Prevent It From Raindrops And Dust..
Universal Sae Connectors: Standard Terminals, Quick Connect/Disconnect, Compatible With Most Sae Port.
Features
- Quality Wire: 12 Feet long copper wire, 16AWG, 2 Pin, with universal SAE connectors. Red wire is for positive and black wire for negative. The whole harness is heavy duty, super flexible and durable.
- Universal SAE Connectors: Standard terminals, quick connect/disconnect, compatible with most SAE port
- Main Purpose: Designed to extend and maintain most battery chargers with SAE quick release connectors. Has a wide range application in daily use of battery tenders, projects of motorcycles, trucks, solar panels, RVs and cars
- High Protection: Each SAE connector comes with dust cap to prevent it from raindrops and dust.
- Package Include: 12FT 16AWG SAE extension cable, 2 Years Warranty
- Fit Type: Universal Fit. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 1.57 x 7.09 x 5.12 inches | Weight: 0.62 pounds
Warranty: 2 Years Warranty
See On Amazon #6
GlowShift Oil Pressure Sensor Adapter Compatible with Chevy Small Block 305/350 - Features (3) 1/8-27 NPT Female Threads - (2) 90 Degree & (1) 45 Degree Sensor Ports
Asin: B0B34ZHN44 | Model: GS-FA-OP-04 | PartNumber: GS-FA-OP-04 | Ean: 0842559131428 | UPC: 842559131428
Features (3) 1/8-27 Npt Female Thread Ports For Gauge & Factory Sensors, 1/8-27 Npt Male Thread That Installs The Adapter To The Engine & (2) 1/8-27 Npt Port Plugs - (2) 1/8-27 Npt Female Threads Angle The Sensor At 90 Degrees & (1) At 45 Degrees - Manufactured From Steel With Nickel Plated Zinc.
Glowshift Guarantee With One Year Limited Warranty & Free Lifetime Technical Support.
Includes Step-By-Step Installation Instructions.
Compatible With Chevy Small-Block 305 350 Engines.
Features
- GlowShift Oil Pressure Sensor Thread Adapter Allows Users to Install an Aftermarket Sensor as well as the Factory Sensor to the Engine from 1 Unit
- Compatible with Chevy Small-Block 305 350 Engines
- Features (3) 1/8-27 NPT Female Thread Ports for Gauge & Factory Sensors, 1/8-27 NPT Male Thread that Installs the Adapter to the Engine & (2) 1/8-27 NPT Port Plugs - (2) 1/8-27 NPT Female Threads Angle the Sensor at 90 Degrees & (1) at 45 Degrees - Manufactured from Steel with Nickel Plated Zinc
- Includes Step-By-Step Installation Instructions
- GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support
- See more on Amazon...
Brand: GlowShift | Manufacturer: GlowShift Gauges
Dimensions: 10.00 x 0.50 x 6.25 inches | Weight: 0.50 pounds
See On Amazon #7
ICT Billet LS Oil Port Adapter 1/8" NPT Turbo Oil Feed Plate Turbocharger Supply LS1 LSX LS3 LQ4 LQ9 LR4 LS6 L33 LS2 LH6 L92 L76 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77 551608
Asin: B00LV4IJSY | Model: 10 | PartNumber: 10 | Ean: 0682384790069 | UPC: 682384790069
Made In Wichita, Kansas From Aerospace Grade, Usa Produced, Billet Aluminum.
Includes Re-Usable Oring Seal And Mounting Hardware.
Heavy Duty, 1/2" Thick Billet Aluminum Plate For Maximum Oil Circulation.
Compatible With All Ls Oil Pans (Except Dry Or Front Sump).
Features
- Conveniently add a 1/8" NPT oil supply for your turbocharger
- Compatible with all LS oil pans (except dry or front sump)
- Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum
- Heavy duty, 1/2 thick billet aluminum plate for maximum oil circulation
- Includes re-usable oring seal and mounting hardware
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 0.80 x 6.10 x 3.90 inches | Weight: 0.18 Pounds
See On Amazon #8
ICT Billet LS Engine Swap M12 1.5 Adapter to 3/8 NPT Extended Length Coolant Temperature Sensor Adapter Water LS Engine Swap LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 551179L
Asin: B019S76KPO | Ean: 0656729843024 | UPC: 656729843024
Made In Wichita, Ks From Aerospace Grade, Usa Billet Aluminum.
Adapters Are Sold Individually, And Include 1 Sealing Washer.
This Adapter Will Fit All Ls Series Engines..
Adapter Has A Female 3/8" Npt Port, 1.7" Deep. Refer To Thread Chart To Check Your Correct Fitting Size. (Use Pn# 551179 For .85" Deep Adapter For Shorter Sensors).
Features
- Factory LS cylinder heads are machined with metric M12-1.5 coolant sensor ports, so your factory Small Block Chevy sensor won't thread in to them. This adapter allows you to keep your original sensors and integrate them into your swapped LS engine.
- Adapter has a female 3/8 NPT port, 1.7 deep. Refer to thread chart to check your correct fitting size. (Use PN# 551179 for .85 deep adapter for shorter sensors)
- Made in Wichita, KS from aerospace grade, USA billet aluminum
- This adapter will fit all LS series engines.
- Adapters are sold individually, and include 1 sealing washer
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.00 x 5.20 x 2.90 Inches
See On Amazon #9
LS Gen 3 ECM Engine Programming Control Module Reader Diagnostic PCM Bench Harness w/Power Supply Fits for GM Chevy All Blue/Red & Blue/Green 1999-2007, OBD2 Port, 18 Gauge, 12 Volt
Asin: B087P84G95 | Model: Gen 3 Bench Top Programming Harness | PartNumber: Gen 3 Bench Top Programming Harness | Ean: 0750466796695 | UPC: 750466796695
Gen Iii Programming Harness Tool Function - The Electronic Control Unit Of The Automobile Electrical System Collects Part Of The Working Status Information, And The Transmission Line Is Sent To The Ecu To Protect The Engine, Etc.
What Will You Get: One Set Obdii Gen 3 Programming Bench Harness With Power Supply Fits For Gm Chevy Ls Ls1 5.3 5.7 6.0. We Offer 1 Year Service With The Gen 3 Ls Bench Harness, Any Questions About Gen 3 Bench Top Programming Harness, Pls Contact Us By Email, We Will Reply You Within 12 Hours..
Premium Quality Ls1 Obdii Bench Harness - This Ls Ls1 Obdii Bench Harness Features A Redesigned Housing To Insure It Lasts Longer Than The Factory Part And Includes The Power Supply And Bolts For A Complete Trouble-Free Replacement. Each Harness Is Tested On An Ecm Before Shipping..
Ls Ls1 Gen Iii Bench Harness Fitment - This Works With Hp Tuners, Obdii Scan Tools, And Other Programming Methods That Use The Obdii Port For Communication With The Computer. The 12V Adapter Supplies Power To Both The Blue Pcm/Computer Connector And The Obdii Port. The 3 Connections Included On The Harness Are The 12V Wall Plug Adapter, The Obdii Port, And The Blue Side Connector For The Ls Computer (Green/Red Is Not Required For Tuning)..
Features
- Gen 3 LS ECM Programming Bench Harness Application - This bench-top harness that plugs into a standard wall outlet and allows you to connect a Gen 3 LS 4.8L, 5.3L, 6.0L computers (1999-2007) for tuning or testing via the OBDII port. Will work with any tuning software, including but not limited to EFI Live, HP Tuners, Tuner Cats.
- LS LS1 Gen III Bench Harness Fitment - This works with HP Tuners, OBDII scan tools, and other programming methods that use the OBDII port for communication with the computer. The 12V adapter supplies power to both the BLUE PCM/Computer connector and the OBDII port. The 3 connections included on the harness are the 12V wall plug adapter, the OBDII port, and the BLUE side connector for the LS computer (green/red is not required for tuning).
- Gen III Programming Harness Tool Function - The electronic control unit of the automobile electrical system collects part of the working status information, and the transmission line is sent to the ECU to protect the engine, etc
- Premium Quality LS1 OBDII Bench Harness - This LS LS1 OBDII Bench Harness features a redesigned housing to insure it lasts longer than the factory part and includes the power supply and bolts for a complete trouble-free replacement. Each harness is tested on an ECM before shipping.
- What Will You Get: One set OBDII Gen 3 Programming Bench Harness with Power Supply fits for GM Chevy LS LS1 5.3 5.7 6.0. We offer 1 year service with the Gen 3 LS Bench Harness, any questions about Gen 3 Bench Top Programming Harness, pls contact us by email, we will reply you within 12 hours.
- See more on Amazon...
Brand: TIKSCIENCE | Manufacturer: Gen 3 Bench Top Harness
See On Amazon #10
LS Engine swap coolant Water Temp Sensor Adapter M12 1.5 Adapter to 3/8 NPT Extended Length Temperature Sensor LSX LS1 LS3 LS2 LM4 LM7 L76 LQ9 LR4 LS6 L92 L99 L33 LR4 LH6
Asin: B09NN62LKL | Model: M12-1.5 coolant sensor ports | PartNumber: M12-1.5 coolant sensor ports
You Can Do An Ls Swap And The Electric Relay Fan Kit Which Come With A Larger And Longer Sensor Than Usual..
Material: Aluminum Al6061,Package Listing : 1 Adapter & 1 Sealing Washer.
Note:Don’T Over Tighten..
Larlansz Precision Threads Never Leaked Or Stripped Any Threads When Installing.This Adapter Will Fit All Gm Ls Series Engines..
Adapter Has A Female 3/8" Npt Port, 1.7" Deep. Work Great To Run A Aftermarket Temp Sensor,Work Perfectly With Your Auto Meter Temp Gauge.Works Perfect With Manual Temp Guage Sending Units With Long Probe. M12-1.5 Screws Right Into Any Ls Cylinder Head..
Features
- LS cylinder heads are machined with metric M12-1.5 coolant sensor ports,This adapter allows you to keep your original sensors and integrate them into your swapped LS engine. I would suggest measuring the length of your sensor before purchasing this adapter.
- Adapter has a female 3/8 NPT port, 1.7 deep. Work great to run a aftermarket temp sensor,Work perfectly with your auto meter temp gauge.Works perfect with manual temp Guage sending units with long probe. M12-1.5 screws right into any LS cylinder head.
- You can do an LS swap and the electric relay fan kit which come with a larger and longer sensor than usual.
- Larlansz Precision threads never leaked or stripped any threads when installing.This adapter will fit all GM LS series engines.
- Material: Aluminum AL6061,Package listing : 1 adapter & 1 sealing washer
- NOTE:Don t over tighten.
- See more on Amazon...
Brand: Larlansz | Manufacturer: larlan
See On Amazon #11
Equus 9848 Oil Pressure and Electronic Temperature Metric Adapter Kit
Asin: B001DKM4PU | Model: 9848 | PartNumber: 9848 | Ean: 0047923098486, 0042173098484 | UPC: 042173098484, 047923098486
Ensures Long Lasting Durability.
Facilitates Hassle Free Installation Of Oil Pressure Gauges.
Made From High Quality Nylon.
Features
- Kit Includes 5 Brass Adapters: 1/8 Inch - 27 NPT to (M10x1, M12x1.5, M14x1.5, M16x1.5 and 1/8 - 28 BSP)
- Made from high quality nylon
- Ensures long lasting durability
- Facilitates hassle free installation of oil pressure gauges
- See more on Amazon...
Brand: EQUUS | Manufacturer: INNOVA
Dimensions: 0.75 x 6.50 x 4.75 Inches | Weight: 0.26 pounds
Warranty: Manufaturer warranty
See On Amazon #12
LS Engine Swap Intake Plug Coolant Temp Oil Pressure Sensor Adapter M16 M12 x 1.5 to 1/8 NPT for All GM LS Series Engines LS1 LSX LS3 5.3L 6.0L 6.2L
Asin: B0C376MVNB | Model: M16X1.5 TO 1/8NPT | PartNumber: M16X1.5 TO 1/8NPT
Male M16-1.5 And Female 1/8" Npt Ls Engine Swap Oil Pressure Sensor Adapter + Male M12-1.5 And Female 1/8" Npt.
Package Listing : 2 Adapter & 2 Sealing Washer.
The Oil Pressure Adapter Replaces The Factory Sender Behind The Intake.The Coolant Temperature Replaces The Plug In The Passenger Side Cylinder Head And Is Made For Newer Low Profile Senders..
Features
- Manufactured from high quality aluminum, Compatible with all GM LS Series Engines
- The Oil pressure adapter replaces the factory sender behind the intake.The Coolant Temperature replaces the plug in the passenger side cylinder head and is made for newer low profile senders.
- Male M16-1.5 and Female 1/8 NPT LS Engine Swap Oil Pressure Sensor Adapter + Male M12-1.5 and Female 1/8 NPT
- Package listing : 2 adapter & 2 sealing washer
- See more on Amazon...
Brand: Larlansz | Manufacturer: Larlan
Dimensions: 0.39 x 0.74 x 0.39 Inches
See On Amazon #13
ICT Billet LS Swap Torque Stall Converter Hub Adapter Transmission Crank LS1 / LT1 TH400 TH350 Flywheel LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 551165
Asin: B01FFXIQCA | Model: . | PartNumber: . | Ean: 0656729842935 | UPC: 656729842935
Made In Wichita, Kansas From Usa Produced Steel.
Includes: 1 Adapter Ring (Inserts Into Rear Of Crankshaft).
Compatible With All Ls And Lt Series Engines Gen 3, 4, 5 (Except 99-00' 6.0L Does Not Require This).
See Our Ls/Lt Crankshaft And Flexplate Guide To Determine Where To Place Your Crankshaft Hub Adapter.
Features
- Adapts Powerglide, 4L80E, TH400, TH350, 700R4, 4L60, 4L60E (from non LS engine) torque converter snout to LS/LT engine
- See our LS/LT Crankshaft and Flexplate guide to determine where to place your crankshaft hub adapter
- Made in Wichita, Kansas from USA produced steel
- Compatible with all LS and LT series engines Gen 3, 4, 5 (except 99-00' 6.0L does not require this)
- Includes: 1 adapter ring (inserts into rear of crankshaft)
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.30 x 4.30 x 4.20 inches
See On Amazon #14
LS Swap Oil Pressure Sensor Adapter M16 1.5 to 1/4 NPT Thread Pipe Fittings for All LS GM Series Engines LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LMG LS3
Asin: B0BNVLMTGL | Model: M16 1.5 TO 1/4 NPT | PartNumber: M16 1.5 TO 1/4 NPT
Male M16-1.5 And Female 1/4" Npt ,1/4" Npt Taper Pipe Thread Port In The Rear Of The Fitting Allows For Common Sensors Or Plumbing Fittings..
Package Listing : 1 Adapter & 1 Sealing Washer.
Our Adapter Installs Most Commonly In The Top-Rear, Or Front-Driver Side Of The Engine Block To Access Pressurized Oil Of The Engine. Seals To The Block With A Sealing Washer. Also You Can Use This To Adapt A Mechanical Oil Pressure Gauge On Your Ls Swap..
Larlansz Precision Threads Never Leaked. Fits Perfectly And Has A Great Seal.Manufactured From High Quality Aluminum,Good Oxidation And Corrosion Resistance,It's Does What It's Supposed To..
Features
- Compatible with: all GM LS Series Engines,Works great for installation of aftermarket gauges.
- Larlansz Precision threads never leaked. Fits perfectly and has a great seal.Manufactured from high quality aluminum,good oxidation and corrosion resistance,it's does what it's supposed to.
- Male M16-1.5 and Female 1/4 NPT ,1/4 NPT taper pipe thread port in the rear of the fitting allows for common sensors or plumbing fittings.
- Our adapter installs most commonly in the top-rear, or front-driver side of the engine block to access pressurized oil of the engine. Seals to the block with a sealing washer. Also You can use this to adapt a mechanical oil pressure gauge on your LS swap.
- Package listing : 1 adapter & 1 sealing washer
- See more on Amazon...
Brand: Larlansz | Manufacturer: Larlan
See On Amazon #15
Z Whip LS 1/8 NPT Oil Port for Turbo Oil Feed Line Auxiliary Oil Supply Billet Adapter Plate LS1 LSX LS2 LS3 Oil Pressure Sensor Oil Cooler Cover LQ4 LQ9 LS6 5.3L 5.7L 6.0L Proudly Made In The USA
Asin: B08LX54MHQ | Ean: 0810065200051 | UPC: 810065200051
We Are An As9100d And Iso 9001:2015 Certified Manufacturer. Parts We Produce Fly At 30,000 Feet Where Failure Is Not An Option..
When You Purchase Z Whip Parts You Will Always Get The Highest Quality For Your Vehicle That You Rightfully Deserve.
Proudly Made In The Usa From Aerospace Grade Billet Aluminum.
Compatible With Gen 3 & 4 Ls Oil Pans – Z Whips Oil Pressure Sensor Adapter Kit Is Compatible With All Gen 3 & Gen 4 Ls Oil Pans Except Gto Front Sump And Ls4 Oil Pans. Ls1 Ls3 Ls2 Lq4 Lq9 Ls6 L92 L99 L33 Lr4.
Features
- Billet 1/8 NPT Oil Port Gives you a place to attach a turbo oil feed line or an aftermarket oil pressure sensor. (Basically, anything with a 1/8 -27 NPT thread)
- COMPATIBLE WITH GEN 3 & 4 LS OIL PANS Z WHIPs oil pressure sensor adapter kit is compatible with all Gen 3 & Gen 4 LS oil pans EXCEPT GTO front sump and LS4 oil pans. LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer. Parts we produce fly at 30,000 feet where failure is not an option.
- Proudly made in the USA from Aerospace Grade Billet Aluminum
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve
- See more on Amazon...
Brand: Z Whip | Manufacturer: Zyxaxis Inc.
Dimensions: 0.50 x 3.00 x 1.00 inches
See On Amazon #16
Z Whip LS Swap Power Steering Line Adapter Fitting Brass LS Pump To 3/8 Flare Older Style Lines M16-1.5 to 5/8-18 Compatible with Camaro GTO Silverado LS1 LSX LS3 Vortec 5.3L 4.8L 5.7L 6.0L LQ4
Asin: B08SR39Q7C | Model: 99447311 | PartNumber: 99447311 | Ean: 0810065200662 | UPC: 810065200662
This Will Thread Into The Rear Of The Power Steering Pump Where The Pressure Line Threads In Then You Will Thread The Factory Flare Style Line Into This Fitting. Comes With Viton O-Ring..
When You Purchase Z Whip Parts You Will Always Get The Highest Quality For Your Vehicle That You Rightfully Deserve.
We Are An As9100d And Iso 9001:2015 Certified Manufacturer That Produces Aerospace Parts For The Boeing Aircraft Company And The Us Military. Parts We Produce Fly At 30,000 Feet Where Failure Is Not An Option. We Put The Same Quality Into Every Part We Produce..
Compatible With 1998 To 2014 Gen 3 And 4 Ls Series Engines Like Camaro Corvette Gto Vortec Trucks Silverado Suburban Trailblazer Sierra Ls1 Ls2 Ls3 Ls6 Lsa Ctsv 4.8L 5.3L 5.7L 6.0L.
Features
- Brass Power steering Adapter Fitting To adapt the newer style GM power steering pumps that use O-ring style line to the older GM style 3/8 Flared Lines found on most gm vehicles that originally came with SBC and BBC engines.(Power Steering Hoses)
- Compatible with 1998 to 2014 Gen 3 and 4 LS Series Engines Like Camaro Corvette GTO Vortec Trucks Silverado Suburban Trailblazer Sierra LS1 LS2 LS3 LS6 LSA CTSV 4.8L 5.3L 5.7L 6.0L
- This will thread into the rear of the power steering pump where the pressure line threads in then you will thread the factory flare style line into this fitting. Comes with Viton O-ring.
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve
- See more on Amazon...
Brand: Z Whip | Manufacturer: Zyxaxis Inc.
See On Amazon #17
Ebrmeiwo LS Swap Power Steering Pump Line Fitting Replacement Part, Use to Convert 3/8'' Flare Older Style Lines M16-1.5 to 5/8-18, Fits GTO, CTSV LS1 LSX LS3 Vortec Truck 5.3L 4.8L 5.7L 6.0L LQ4
Asin: B0CGJ85RW1
[Compatible Models] Compatible With 1998 To 2014 Gen 3 And 4 Ls Series Engines, Like Ls1 Ls2 Ls3 Ls6 Lsa Ctsv 4.8L 5.3L 5.7L 6.0L..
[How To Install] First Screw The Connector Into The Thread Of The Rear Pressure Line Of The Power Steering Pump, And Then Screw In The Factory Horn Shaped Line..
[High-Quality Material] Made Of Sturdy Brass And Good Elastic Rubber, Which Are More Durable Than Plastic, Not Prone To Rust Or Break..
[Function] The Power Steering Pump Fitting Is A Direct Bolted Part, Use To Convert New Model Gm Power Steering Pump Pressure Hoses To Fit 3/8 Horn Fitting..
Features
- [Package] Include [1] LS Swap Power Steering Pump Line Fitting & [1] Viton O-ring & [1] Rubber washer. Quality replacement parts.
- [Function] The power steering pump fitting is a direct bolted part, use to convert new model GM power steering pump pressure hoses to fit 3/8 horn fitting.
- [Compatible Models] Compatible with 1998 to 2014 Gen 3 and 4 LS series engines, like LS1 LS2 LS3 LS6 LSA CTSV 4.8L 5.3L 5.7L 6.0L.
- [High-Quality Material] Made of sturdy brass and good elastic rubber, which are more durable than plastic, not prone to rust or break.
- [How to install] First screw the connector into the thread of the rear pressure line of the power steering pump, and then screw in the factory horn shaped line.
- See more on Amazon...
Brand: Ebrmeiwo | Manufacturer: Sleepzj
Dimensions: 0.85 x 1.18 x 0.85 inches | Weight: 33.10 Grams
See On Amazon #18
ICT Billet LS Engine Swap M12 1.5 Adapter to 3/8 NPT Coolant Temperature Sensor Water LS1 LSX LS3 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 551179
Asin: B015NG418C | Model: 551179 | PartNumber: 551179 | Ean: 0656729846810 | UPC: 656729846810
Made In Wichita, Ks From Aerospace Grade, Usa Billet Aluminum.
Adapters Are Sold Individually, And Include 1 Sealing Washer.
This Adapter Will Fit All Ls Series Engines..
Adapter Has A Female 3/8" Npt Port, .85" Deep. Refer To Thread Chart To Check Your Correct Fitting Size..
Features
- Factory LS cylinder heads are machined with metric M12-1.5 coolant sensor ports, so your factory Small Block Chevy sensor won't thread in to them. This adapter allows you to keep your original sensors and integrate them into your swapped LS engine.
- Adapter has a female 3/8 NPT port, .85 deep. Refer to thread chart to check your correct fitting size.
- Made in Wichita, KS from aerospace grade, USA billet aluminum
- This adapter will fit all LS series engines.
- Adapters are sold individually, and include 1 sealing washer
- See more on Amazon...
Brand: ICT Billet | Manufacturer: ICT Billet
Dimensions: 1.00 x 2.60 x 3.10 inches
See On Amazon #19
GlowShift -4 an Fuel Rail Fuel Pressure Sensor Thread Adapter Compatible with Chevy GM LS1 LS2 LS3 LS6 Engines
Asin: B00GS8E3WY | Model: GS-FA_AN-4 | PartNumber: GS-FA_AN-4 | Ean: 0609456162180 | UPC: 609456162180
Includes Step-By-Step Installation Instructions.
Glowshift Guarantee With One Year Limited Warranty & Free Lifetime Technical Support.
Compatible With Chevy Gm Ls1, Ls2, Ls3 & Ls6.
Features
- GlowShift -4 AN Fuel Rail Fuel Pressure Sensor Thread Adapter Allows Users to Easily Install a 1/8-27 NPT Fuel Pressure Sensor to a GM Fuel Rail
- Compatible with Chevy GM LS1, LS2, LS3 & LS6
- Includes Step-By-Step Installation Instructions
- GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support
- See more on Amazon...
Brand: GlowShift | Manufacturer: GlowShift Gauges
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.41 pounds
See On Amazon #20
BDFHYK Flexplate Adapter Spacer LS Swap Torque Stall Converter Hub Crankshaft Adapter Compatible with TH350 TH400 Transmission
Asin: B08BCBS947 | Model: DP06-SI | PartNumber: DP06-SI
✔️【Easy Installation】Ls Adapter Sleeves Allow You To Bolt A Gm Automatic Transmission To An Engine Or An Older Gm Automatic Transmission To An Ls-Series Engine. These Adapter Sleeves Insert Into The Crankshaft Flange With No Modifications, Giving You The Correct Distance And Pilot Size..
👍【The Best】Bdfhyk Values Your Shopping Experience, If You Encounter Any Problems With The Ls Flexplate Adapter, Please Tell Us. We Provide 24-Hour Mail Service And Will Help You As Soon As Possible..
🚗【Attention】Use Of This Ls Flexplate Adapter Keeps You From Possibly Damaging The Input Shaft Of Your Transmission When Doing A Transmission Swap. Pilot Bushing Bore Changes And Flexplate/Flywheel Configurations Play An Important In Interchange..
✔️【Stable & Good Ductility】Crankshaft Adapter Has Good Ductility, Conduction And Thermal Conductivity, And Has Strong Ferromagnetic. Stable Characteristics, High Reliability. Perfect Match For The Original Car..
Features
- PREFECT DESIGNED Flexplate Adapter Spacer compatible with GM LS series Xtreme Duty Flexplate with a 4mm thick centerplate, to GM automatic transmission For 1998-2004 LS based engines using a TH350 or TH400 transmission.
- STABLE & GOOD DUCTILITY Crankshaft adapter has good ductility, conduction and thermal conductivity, and has strong ferromagnetic. Stable characteristics, high reliability. Perfect match for the original car.
- EASY INSTALLATION Ls Adapter sleeves allow you to bolt a GM automatic transmission to an engine or an older GM automatic transmission to an LS-series engine. These adapter sleeves insert into the crankshaft flange with no modifications, giving you the correct distance and pilot size.
- ATTENTION Use of this ls flexplate adapter keeps you from possibly damaging the input shaft of your transmission when doing a transmission swap. pilot bushing bore changes and flexplate/flywheel configurations play an important in interchange.
- THE BEST BDFHYK values your shopping experience, If you encounter any problems with the LS flexplate adapter, please tell us. We provide 24-hour mail service and will help you as soon as possible.
- See more on Amazon...
Brand: BDFHYK | Manufacturer: BDFHYK
See On Amazon
Looking For Something Else?
Search