22 Ton (44,000 lbs) Heavy Duty Pin Type Car Jack Stands with Lock Adjustable Height to 19.75" Fit for Supporting Trucks, Trailers and Equipment
Asin: B0BBFPQPV9
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Height Adjustment Pins】Height Adjustment Pin Connected To Base By Way Of Lanyard To Prevent Against Loss.
【Application】This Pair Of 22-Ton Jack Stands Is Ideal For Supporting Trucks, Trailers And Equipment In Fleet Garages, Agricultural, Industrial And Construction Environments.
【Safe And Secure】Large Saddle With Locating Lugs To Support And Position Vehicle Frame.
【Support Range】Minimum Height: 11 13/16 Inch & Maximum Height: 19 3/4 Inch.
Features
- HEAVY DUTY Heavy duty steel frame provides stability and reliability when in use
- SUPPORT RANGE Minimum Height: 11 13/16 Inch & Maximum Height: 19 3/4 Inch
- HEIGHT ADJUSTMENT PINS Height adjustment pin connected to base by way of lanyard to prevent against loss
- SAFE AND SECURE Large saddle with locating lugs to support and position vehicle frame
- APPLICATION This Pair of 22-Ton Jack Stands is ideal for supporting trucks, trailers and equipment in fleet garages, agricultural, industrial and construction environments
- See more on Amazon...
Brand: VOWAGH | Manufacturer: VOWAGH
Dimensions: 15.40 x 12.60 x 16.50 inches | Weight: 70.50 Pounds
See On Amazon Similar To 22 Ton 44000 lbs Heavy
#1
SPECSTAR Pneumatic Air Hydraulic Bottle Jack with Manual Hand Pump 20 Ton Heavy Duty Auto Truck Travel Trailer Repair Lift Blue
Asin: B0B8NH9WXM | Model: VH811US-BL | PartNumber: VH811US-BL
Splicing Handle - The 2 Handles Can Be Connected To Each Other, Which Is Convenient To Use And Easy To Store; The Bottom Of The Handle Is Equipped With A Plastic Sheath, Which Can Effectively Protect The Hands From Injury.
Wide Application - The Equipment Has Been Tested By The Factory And Has A High Degree Of Reliability And Safety; It Is Made Of Heavy-Duty Iron And Has A Dual Lift (Pneumatic And Manual) Mode; It Is Mainly Used For The Maintenance Of Automobiles, Agricultural Vehicles, Heavy Trucks, As Well As Mobile Machinery And Heavy Equipment.
Simple Operation - Clamp One End Of The Handle Bayonet To The Oil Return Valve And Then Tighten Clockwise; Connect The Air Pipe Port To The Air Compressor Interface, And Then Press The Switch To Raise, Otherwise, It Will Stop; After It Works, Slowly Rotate The Oil Return Valve Pile Anticlockwise, And It Will Drop Automatically.
Sturdy Rod And Spring - The Height Of The Rod Can Be Adjusted Flexibly, With Strong Resistance To Pressure And Corrosion; Equipped With A Highly Complex Double Spring, It Has The Compact Structure To Ensure That The Product Can Be Successfully Reset After Use.
Features
- HIGH CAPACITY - This jack has a load capacity of up to 20 tons (44000 LBS) and a maximum pressure of 200PSI; With its powerful function, it is the best tool for car maintenance and auto emergency treatment
- STURDY ROD AND SPRING - The height of the rod can be adjusted flexibly, with strong resistance to pressure and corrosion; Equipped with a highly complex double spring, it has the compact structure to ensure that the product can be successfully reset after use
- SPLICING HANDLE - The 2 handles can be connected to each other, which is convenient to use and easy to store; The bottom of the handle is equipped with a plastic sheath, which can effectively protect the hands from injury
- SIMPLE OPERATION - Clamp one end of the handle bayonet to the oil return valve and then tighten clockwise; Connect the air pipe port to the air compressor interface, and then press the switch to raise, otherwise, it will stop; After it works, slowly rotate the oil return valve pile anticlockwise, and it will drop automatically
- WIDE APPLICATION - The equipment has been tested by the factory and has a high degree of reliability and safety; It is made of heavy-duty iron and has a dual lift (pneumatic and manual) mode; It is mainly used for the maintenance of automobiles, agricultural vehicles, heavy trucks, as well as mobile machinery and heavy equipment
- See more on Amazon...
Brand: SPECSTAR | Manufacturer: SPECSTAR
Weight: 32.85 pounds
Warranty: 12-months warranty
See On Amazon #2
BIG RED ATZ220006P Torin Heavy Duty Jack Stands: Pin Style Jack Stand with 2 Casters and Handle, Easily Portable Car Stand for Car SUV, Truck and Pick Up, 22 Ton (44,000 lb) Capacity, Red
Asin: B0CJF2DXDK | Model: ATZ220006P | PartNumber: ATZ220006P | Ean: 0810104646277 | UPC: 810104646277
High Gauge Steel. Gear Rock Solid Reinforced Non-Slip Lighter Sturdier. Overall Thick And Solid, Sturdy Welded Steel Construction For Superior Durability And Strength.
Durability. High-Quality Steel And Spray Paint Make The Bracket More Durable, With No Rusting Or Breaking. Suitable For Cars, Trucks, Suvs, Utvs. Contact Our Customer Service For Any Questions, We Have A 1-Year Warranty.
Premium Production Level. Man-Machine Handles For Positioning And Easy Carrying. Upgrade Bas Has Large Surface Provide The Added Strength And Stable Support, More Safety While Working Underneath A Car.
Safety And Reliability. High-Density And High-Strength Pin For Superior Durability And Strength. Heavy Duty Jack Stand 22 Ton (44,000 Lb) Capacity. Features An 19.6" Max Lifting Height And 13.8" Min Lifting Height.
Features
- EASY MOVE AND STORAGE. This Heavy Duty Jack Stands with Two casters give you the ability for easily unloaded mobility. All in one storage, The pin storage for easy store the pin when it is not in use, Efficient storage to avoid loss
- SAFETY AND RELIABILITY. High-density and high-strength pin for superior durability and strength. Heavy Duty Jack Stand 22 Ton (44,000 lb) Capacity. Features an 19.6 max lifting height and 13.8 min lifting height
- HIGH GAUGE STEEL. Gear rock solid reinforced non-slip lighter sturdier. Overall thick and solid, Sturdy welded steel construction for superior durability and strength
- PREMIUM PRODUCTION LEVEL. Man-machine handles for positioning and easy carrying. Upgrade bas has large surface provide the added strength and stable support, more safety while working underneath a car
- DURABILITY. High-quality steel and spray paint make the bracket more durable, with no rusting or breaking. Suitable for cars, trucks, SUVs, UTVs. Contact our customer service for any questions, we have a 1-year warranty
- See more on Amazon...
Brand: BIG RED | Manufacturer: Torin
Dimensions: 13.98 x 13.39 x 11.02 inches | Weight: 63.93 Pounds
Warranty: 1 year limited manufacturer
See On Amazon #3
22 Ton Heavy Duty Air Bottle Jack Hydraulic Bottle Jack XL Model (Air Operated Hydraulic Jack)
Asin: B0057ORQS8 | Ean: 0717029395313 | UPC: 717029395313
Jack Foot Print Is 23" X 7-1/4".
Soft Rubber T Bar Hand Grips By Ez Travel Collection.
Overall Height With Bar Is 54".
4 Saddle Extensions Included: 2" X 4",2" X 2-1/2" , 2-3/4" X 1" And 1-7/8" X 7/8".
Features
- Saddle Extension holder is designed to keep the extensions together with the jack for convenience
- 4 saddle extensions included: 2 x 4,2 x 2-1/2 , 2-3/4 x 1 and 1-7/8 x 7/8
- Jack foot print is 23 x 7-1/4
- Overall Height with bar is 54
- Soft Rubber T bar hand grips by EZ Travel Collection
- See more on Amazon...
Brand: EZ Travel Collection | Manufacturer: EZ Travel Distribution
See On Amazon #4
22 Ton (44,000 lbs) Jack Stands, Heavy Duty Pin Type Professional Car Jack Stand with Lock,Adjustable Height to 19.75",Wide Base Safety Design for Supporting Trucks, Trailers and Equipment,1 Pair
Asin: B0CFLF4RM9
[Easy To Use] The Handle Is Designed On The Side For Easy Positioning And Carrying. The Locking Pin Is Fixed On The Base To Prevent Loss..
[Package Includes] A Pair Of Heavy Duty Jack Stands.If You Have Any Questions While Using It, Please Feel Free To Contact Us And Send An Email To Us..
[Application] Jack Stands Are Helpful To Support The Vehicle After Lifting With Jack, Widely Used In Cars, Trucks, Suvs, Atvs, Utvs.
[Robust & Durable] The Welded Steel Structure With Strong Structure Can Prevent Deformation Or Distortion, And Has Excellent Safety And Strength. Each Jack Stand Is Equipped With A Large Chassis Design, Which Greatly Improves The Stability During Use..
Features
- [Load Capacity] 22 Ton (44,000lbs) capacity fits most vehicles.Minimum Height: 11.82" ,Maximum Height: 19.75"
- [Robust & durable] The welded steel structure with strong structure can prevent deformation or distortion, and has excellent safety and strength. Each jack stand is equipped with a large chassis design, which greatly improves the stability during use.
- [Easy to use] The handle is designed on the side for easy positioning and carrying. The locking pin is fixed on the base to prevent loss.
- [Application] Jack stands are helpful to support the vehicle after lifting with jack, widely used in cars, trucks, SUVs, ATVs, UTVs
- [Package includes] a pair of heavy duty jack stands.If you have any questions while using it, please feel free to contact us and send an email to us.
- See more on Amazon...
Brand: FSBCGT | Manufacturer: SUYEPARTS
See On Amazon #5
Stark USA 22-Ton Capacity Jack Stands Pin Style Lock Adjustable Height, Set of 2 - Pair
Asin: B08376Q1Y6 | Ean: 0602589759463 | UPC: 602589759463
Sold And Used In Pairs; Ranges In Height From 19" To 29-3/8" With A 22-Ton (44,000 Lb) Capacity; Large Saddle With Locating Lugs To Support And Position Vehicle Frame.
Each Jack Stand Provides A Large, V Shaped Saddle To Cradle Axles Or Other Under Truck Components.
Forged Iron Self-Locking Ratchet Bar For Ease Of Use Means No Locking Key Is Necessary; When The Handle Is Up, Ratchet Can Be Adjusted To Any Height Freely. And When It Down, Ratchet Will Be Locked Automatically.
Durable Yet Compact And Lightweight, The Steel Jack Stands Can Be Stored In The Garage Or Easily Kept In The Trunk Along With Other Roadside Equipment For Easy Access.
Features
- Jack stands give home mechanics and general DIYers the security and stability they need to get the job done; 10in wide heavy-gauge steel base ensures stable support when in use.
- Durable yet compact and lightweight, the steel jack stands can be stored in the garage or easily kept in the trunk along with other roadside equipment for easy access
- Sold and used in pairs; Ranges in height from 19 to 29-3/8 with a 22-Ton (44,000 lb) capacity; Large saddle with locating lugs to support and position vehicle frame
- Forged iron self-locking ratchet bar for ease of use means no locking key is necessary; when the handle is up, ratchet can be adjusted to any height freely. And when it down, ratchet will be locked automatically
- Each jack stand provides a large, V shaped saddle to cradle axles or other under truck components
- See more on Amazon...
Brand: Stark USA | Manufacturer: Stark USA
Dimensions: 16.00 x 17.00 x 13.00 inches | Weight: 74.00 pounds
See On Amazon #6
HPDMC 22 Ton Quick Lift Air/Floor Hydraulic Air Axle Bottle Jack - Heavy Duty Steel Service Bottle Jack Truck Lift Built-in Wheels
Asin: B0B62QZTGK | Model: HPDMC-QBQD0080210 | PartNumber: HPDMC-QBQD0080210 | Ean: 0717186316688 | UPC: 717186316688
Performance You Can Count On - The Long-Wearing Performance Of This Jack Starts With The Piston-Ram. It's Treated And Polished To Resist Thinning Over Time And Uses A Y-Style Polyurethane Sealing Ring With A Backup Ring..
Including 1 Year Warranty..
Lengthened Handle - 46" Long Handle With Air Controls Saves Effort, Makes It Easy To Position Most Vehicles. Adjustable Angle From 90-180 Degree. One Handle Operating Setting, Easy To Use. One Pull Of The Handle Activates The Self-Retracting 22-Ton Capacity Ram. Includes Handle Lock Lever.
Commercial Grade - Heavy Duty Steel Construction With Sturdy Handle And Chrome Plated Ram, Makes Payload Capability Ups To 22 Ton. Sprayed Paint To Resist Rust & Corrosion, Adds Extra Durability. Suitable For Home Or Business Applications.
Features
- High Quality X-Large Rubber Tires - (2) large hard rubber tires on steel wheels, well absorb shock, resist wear and skid. Wheel diameter 8"
- Commercial Grade - Heavy Duty steel construction with sturdy handle and chrome plated ram, makes payload capability ups to 22 ton. Sprayed paint to resist rust & corrosion, adds extra durability. Suitable for home or business applications
- Performance You Can Count On - The long-wearing performance of this jack starts with the piston-ram. It's treated and polished to resist thinning over time and uses a Y-style polyurethane sealing ring with a backup ring.
- Lengthened Handle - 46 long handle with air controls saves effort, makes it easy to position most vehicles. Adjustable angle from 90-180 degree. One handle operating setting, easy to use. One pull of the handle activates the self-retracting 22-ton capacity ram. Includes handle lock lever
- Including 1 year warranty.
- See more on Amazon...
Brand: HPDMC | Manufacturer: HPDMC
Dimensions: 11.80 x 25.20 x 13.80 inches
Warranty: 1 Year
See On Amazon #7
Stark USA 22 Ton Automotive Jack Stands for Garages, Repair Shops, and DIY, Pin Style, V Shaped Saddle, 44,000 LBS Adjustable Height, 4-Pieces
Asin: B0CK575Y7W | Ean: 0840166543597 | UPC: 840166543597
Durable Yet Compact And Lightweight, The Steel Jack Stands Can Be Stored In The Garage Or Easily Kept In The Trunk Along With Other Roadside Equipment For Easy Access.
Each Jack Stand Provides A Large, V Shaped Saddle To Cradle Axles Or Other Under Truck Components.
Forged Iron Self-Locking Ratchet Bar For Ease Of Use Means No Locking Key Is Necessary; When The Handle Is Up, Ratchet Can Be Adjusted To Any Height Freely. And When It Down, Ratchet Will Be Locked Automatically.
Sold 4-Pieces Jack Stand | Ranges In Height From 19" To 29-3/8" With A 22-Ton (44,000 Lb) Capacity; Large Saddle With Locating Lugs To Support And Position Vehicle Frame.
Features
- Jack stands give home mechanics and general DIYers the security and stability they need to get the job done; 10in wide heavy-gauge steel base ensures stable support when in use.
- Sold 4-Pieces Jack Stand | Ranges in height from 19 to 29-3/8 with a 22-Ton (44,000 lb) capacity; Large saddle with locating lugs to support and position vehicle frame
- Durable yet compact and lightweight, the steel jack stands can be stored in the garage or easily kept in the trunk along with other roadside equipment for easy access
- Forged iron self-locking ratchet bar for ease of use means no locking key is necessary; when the handle is up, ratchet can be adjusted to any height freely. And when it down, ratchet will be locked automatically
- Each jack stand provides a large, V shaped saddle to cradle axles or other under truck components
- See more on Amazon...
Brand: Stark USA | Manufacturer: Stark USA
Dimensions: 16.00 x 17.00 x 13.00 inches | Weight: 74.00 pounds
See On Amazon #8
OTC S022 Jack Stands - 22 Ton
Asin: B08FV6SRVY | Model: S022 | PartNumber: S022 | Ean: 0731413592362 | UPC: 731413592362
Steel Tube And Support Column Has 3 Positions For Height Adjustment.
Clear Multilingual Safety And Capacity Markings.
Durable Baked Enamel Finish Resists Corrosion.
Flat Base Welded To A Square Tube Accommodates A Square Steel Support Column.
Features
- Ideal size for safely lifting heavy duty vehicles, Meets ASME PASE-2019 safety standards
- Flat base welded to a square tube accommodates a square steel support column
- Steel tube and support column has 3 positions for height adjustment
- Durable baked enamel finish resists corrosion
- Clear multilingual safety and capacity markings
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 13.00 x 20.00 x 14.00 inches | Weight: 40.80 pounds
Warranty: Per Contract with Amazon
See On Amazon #9
K Tool International 63194 22 Ton Automotive Air Truck Jack for Garages, Repair Shops, and DIY, 44,000 lbs. Capacity, Hydraulic Lift Range 9"- 18", Heavy Duty Steel, Load-limiting/Bypass Valves, Blue
Asin: B00L1ZBVB0 | Model: 63194 | PartNumber: 63194 | Ean: 0769622631947 | UPC: 769622631947
[Built-In By-Pass] - K Tool Truck Jack Includes A Built-In By -Pass Device To Protect Hydraulic System From Over Pumping Damage..
[Strong/Durable] - Heavy Duty Truck Jack (Service Jack) Has A Welded Cylinder And Reservoir For Added Strength And Durability. The Truck Jack Also Has Chrome Plated Rams To Resist Rust And Wear..
[Built-In Muffler] - Provides Built-In Muffler To Promote Quiet Operation, High Speed Turbo Motor For Efficient Effortless Operation..
[Truck Jack Specs] - Minimum Height: 9" (228Mm); Maximum Height: 18" (457Mm); Hydraulic Lifting: 4-3/4" (122Mm); Extension Screw: 4-1/4" (107Mm); Saddle Diameter: 1-3/4"; Wheel Diameter: 8"; Handle Length: 48-2/5".
Features
- [22-TON CAPACITY] - K tool International service jack rated to lift up to 22 tons or 44,000 lbs.
- [TRUCK JACK SPECS] - Minimum Height: 9 (228mm); Maximum Height: 18 (457mm); Hydraulic Lifting: 4-3/4 (122mm); Extension Screw: 4-1/4 (107mm); Saddle diameter: 1-3/4; Wheel Diameter: 8; Handle length: 48-2/5
- [BUILT-IN BY-PASS] - K Tool truck jack includes a built-in by -pass device to protect hydraulic system from over pumping damage.
- [BUILT-IN MUFFLER] - Provides built-in muffler to promote quiet operation, High speed turbo motor for efficient effortless operation.
- [STRONG/DURABLE] - Heavy duty truck jack (service jack) has a welded cylinder and reservoir for added strength and durability. The truck jack also has chrome plated rams to resist rust and wear.
- See more on Amazon...
Brand: K Tool International | Manufacturer: K Tool International
Dimensions: 11.00 x 27.00 x 13.00 inches | Weight: 89.00 Pounds
Warranty: Manufacturer Warranty
See On Amazon #10
Torin ATZ220005B Heavy Duty Pin Style Adjustable Height Automotive Jack Stands, 22 Ton (44,000 lb) Capacity, Red, 1 Pair
Asin: B09ZP7J47N | Model: ATZ220005B | PartNumber: ATZ220005B | Ean: 0615268002255 | UPC: 615268002255
Wrought Iron Self-Locking Ratchet Lever Is Easy To Use, No Need To Lock The Key; When The Handle Is Up, The Ratchet Can Be Freely Adjusted To Any Height And Wwhen It Comes Down, The Ratchet Will Automatically Lock.
Durable Baked Enamel Finish Resists Corrosion And Is Compact And Lightweight; Can Be Stored In The Garage Or Easily Stored In The Trunk With Other Roadside Equipment Making It Easy To Access.
Suitable For Small, Medium, And Large Vehicles; The Pin Made Of Fine Steel Is Designed To Be Suitable For A Variety Of Gathering Heights; Precise Size For Safe Lifting Of Heavy Vehicles And Meets Pase-2019 Safety Standards.
Y Style Head And Large Square Bottom: Each Jack Stand Provides A Large V-Shaped Saddle To Support Axles Or Other Components Under The Truck.
Features
- Lift Height: From 12.8 inches to 19.7 inches; Capacity of 22 tons (44,000 lbs); Large saddle with positioning lugs to support and position the frame
- Y style head and Large square bottom: Each jack stand provides a large V-shaped saddle to support axles or other components under the truck
- Wrought iron self-locking ratchet lever is easy to use, no need to lock the key; When the handle is up, the ratchet can be freely adjusted to any height and wWhen it comes down, the ratchet will automatically lock
- Suitable for small, medium, and large vehicles; The pin made of fine steel is designed to be suitable for a variety of gathering heights; Precise size for safe lifting of heavy vehicles and meets PASE-2019 safety standards
- Durable baked enamel finish resists corrosion and is compact and lightweight; Can be stored in the garage or easily stored in the trunk with other roadside equipment making it easy to access
- See more on Amazon...
Brand: Torin | Manufacturer: Torin
Dimensions: 12.79 x 11.02 x 11.02 inches | Weight: 58.20 Pounds
Warranty: 1 year
See On Amazon #11
ESCO 22 Ton Heavy Duty Jack Stands with Locking Support Pin, 1 Pair
Asin: B0B8T3ZH5M | Model: 10455 PAIR | PartNumber: 10455 PAIR | Ean: 0816904025106 | UPC: 816904025106
22 Ton Capacity Per Stand, Includes 2 Jack Stands.
Handle Provides Ease Of Positioning And Carrying.
11 In. X 11 In. Solid Steel Base Plate Provides Exceptional Stability.
Features
- Adjustable height from 14 in. to 20 in.
- 11 in. x 11 in. solid steel base plate provides exceptional stability
- 22 ton capacity per stand, includes 2 jack stands
- Handle provides ease of positioning and carrying
- See more on Amazon...
Brand: ESCO | Manufacturer: ESCO
Weight: 0.00 Pounds
Warranty: 1 year manufacturer
See On Amazon #12
ESCO 22 Ton Heavy Duty Jack Support Stands with Threaded Adjustable Post, 1 Pair
Asin: B0C91THYH8 | Model: 10456 | PartNumber: 10456 | Ean: 0816904025397 | UPC: 816904025397
Pin Style Column Adjusts To Three Different Axle Height Positions.
Sold As A Pair.
Great For Construction, Fleet And Semi-Truck, Material Handling, Maintenance Garages And More.
Designed With An Adjustable Screw Style Saddle That Provides 2 Inches Of Additional Height For Better Accuracy While Supporting Load.
Features
- Support loads up to 22 tons (44,000 lbs. per stand)
- Designed with an adjustable screw style saddle that provides 2 inches of additional height for better accuracy while supporting load
- Pin style column adjusts to three different axle height positions
- Great for construction, fleet and semi-truck, material handling, maintenance garages and more
- Sold as a pair
- See more on Amazon...
Brand: ESCO | Manufacturer: ESCO
Warranty: 1 year manufacturer
See On Amazon #13
22 Ton (44,000 lbs) Heavy Duty Pin Type Professional Car Jack Stands with Lock Adjustable Height to 19.75" Fit for Supporting Trucks, Trailers and Equipment, 1 Pair
Asin: B0BLZJ7JBN | Model: JX104-RD | PartNumber: JX104-RD
Height Adjustment Pin Connected To Base By Way Of Lanyard To Prevent Against Loss,Large Saddle With Locating Lugs To Support And Position Vehicle Frame.
Easy Use, Install The Support Column In The Stand Where The Locking Holes In The Column Are Facing The Locking Pin Attachment Location.
This Pair Of 22-Ton Jack Stands Is Ideal For Supporting Trucks, Trailers,Cars,Sedans,Suvs, Atvs, Utvs And Equipment In Fleet Garages, Agricultural, Industrial And Construction Environments,Steel Pin Is Secured To Stand To Prevent Loss..
Features
- Heavy duty steel frame provides stability and reliability when in use,Minimum Height: 11 13/16 Inch & Maximum Height: 19 3/4 Inch
- This Pair of 22-Ton Jack Stands is ideal for supporting trucks, trailers,cars,sedans,SUVs, ATVs, UTVs and equipment in fleet garages, agricultural, industrial and construction environments,Steel pin is secured to stand to prevent loss.
- Height adjustment pin connected to base by way of lanyard to prevent against loss,Large saddle with locating lugs to support and position vehicle frame
- Easy use, Install the support column in the stand where the locking holes in the column are facing the locking pin attachment location
- See more on Amazon...
Brand: PRUNkuar | Manufacturer: PRUNkuar
Dimensions: 15.35 x 16.54 x 12.60 inches
Warranty: 180 Days
See On Amazon #14
JEGS Air Over Hydraulic Air Jack - 22 Ton Air Hydraulic Floor Jack (44,000lbs) Capacity - 120 to 200 PSI Operating Range - Yellow Steel Heavy Duty Air Hydraulic Jack
Asin: B07FXKF6WC | Ean: 0889944096184 | UPC: 889944096184
Compact, But Mighty Design Easily Slips Into Small Spaces While Not Sacrificing The Lift Capacity Of The 22 Ton Air Jack..
Ideal For Lifting Axles, Farm Vehicles, Heavy-Duty Machinery, Industrial Equipment, And More..
Includes: (1) 50 In. 3-Position Handle, (1) 4 Ft. X 3/8 In. Air Hose, (2) 8 In. Wheels..
Lift Range: 9 To 17 Inches. Raise Your Load To Your Desired Height, While The Extension Screw Helps You Fine-Tune Height From There..
Features
- Ideal for lifting cars, trucks, farm vehicles, heavy-duty machinery, industrial equipment, and more up to 22 tons.
- Lift Range: 9 to 17 inches. Raise your load to your desired height, while the extension screw helps you fine-tune height from there.
- Compact, but mighty design easily slips into small spaces while not sacrificing the lift capacity of the 22 ton air jack.
- Includes: (1) 50 in. 3-Position Handle, (1) 4 ft. x 3/8 in. Air Hose, (2) 8 in. Wheels.
- Ideal for lifting axles, farm vehicles, heavy-duty machinery, industrial equipment, and more.
- See more on Amazon...
Brand: JEGS | Manufacturer: JEGS
Dimensions: 12.00 x 26.00 x 14.50 inches | Weight: 76.00 pounds
See On Amazon #15
Heavy Duty Car Jack Stand, Pin Type Adjustable Height Automotive Jack Stands with Lock, 22 Ton (44,000 lb) Capacity, Red, 1 Pair
Asin: B0CYP8G23X | Model: jack stand | PartNumber: jack stand | Ean: 0198290868988 | UPC: 198290868988
Adjustable Height: The Car Jack Stand Can Be Adjusted From 13'' To 19'' According To Your Needs. Equipped 5-Hole Locations In The Support Tube Make Pin-Facilitated Height Adjustment Quick And Easy..
Wide Application: Used In Pairs For Supporting Cars Trucks, Trailers, And Equipment In Garages, Agricultural, Industrial, And Construction Environments..
Enhanced Stability And Safety: The Wide Base And Stable Support Arms Provide A Solid And Secure Foundation For The Jack Stand, Minimizing The Risk Of Vehicle Tipping Or Shifting During Repairs And Providing A Safe And Reliable Working Environment..
Large Saddle Support: With A Large Positioning Saddle, This Truck Jack Stand Can Firmly Position The Vehicle, Making The Entire Use More Stable And Secure..
Features
- 22-Ton Pin Jacks: This pair of jack stands features a 22-ton load capacity for unibody vehicles with extra-large support bases. The steel structure of the car jack makes it more durable, rust-proof, and corrosion-resistant.
- Large Saddle Support: With a large positioning saddle, this truck jack stand can firmly position the vehicle, making the entire use more stable and secure.
- Adjustable Height: The car jack stand can be adjusted from 13'' to 19'' according to your needs. Equipped 5-hole locations in the support tube make pin-facilitated height adjustment quick and easy.
- Enhanced Stability and Safety: The wide base and stable support arms provide a solid and secure foundation for the jack stand, minimizing the risk of vehicle tipping or shifting during repairs and providing a safe and reliable working environment.
- Wide Application: Used in pairs for supporting cars trucks, trailers, and equipment in garages, agricultural, industrial, and construction environments.
- See more on Amazon...
Brand: Towallmark | Manufacturer: Towallmark
Warranty: 1 year
See On Amazon #16
22 Ton (44,000 lbs) Car Jack Stands with Lock Heavy Duty Pin Type Professional Adjustable Height to 12-20",Fit for Supporting Trucks, Trailers and Equipment, 1 Pair(Red)
Asin: B0CVY256WT | Model: 35255 | PartNumber: 35255
Features
- Robust and Versatile: Our professional heavy-duty jack stands are engineered with a staggering 22-ton (44,000 lbs) capacity, catering to a wide range of vehicles. With a maximum lifting height of 20" and a minimum lifting height of 12", these jack stands are perfectly suited for addressing diverse lifting needs with ease and precision.
- See more on Amazon...
Brand: ME2 | Manufacturer: LTH
Dimensions: 12.00 x 10.00 x 10.00 Inches | Weight: 69.00 Pounds
Warranty: 30 Day
See On Amazon #17
Torin 22 Ton (44,000 lb) Capacity Heavy Duty Steel Jack Stands, 2 Pack, T80072, Black
Asin: B08LQSLVNY | Model: T80072 | PartNumber: T80072 | Ean: 0615268800721 | UPC: 615268800721
Adjustable Height Ranges From 11.8" To 19.7" With A 22 Ton (44,000 Lb) Load Capacity.
Wide Foot Base Provides Added Strength And Stable Support; Includes A Limited 1 Year Manufacturer Warranty.
Features A Large V-Shape Saddle Surface Area For Better Contact With The Load Being Supported; Built-In Handle Allows For Easy Carrying.
Constructed Of High-Grade Forged Steel With A Welded Frame Design For Durability; Handles A Wide Range Of Vehicles And Equipment, Including Agricultural And Industrial Applications.
Features
- Heavy-duty jack stands are used to support your vehicle after lifting with a jack
- Constructed of high-grade forged steel with a welded frame design for durability; Handles a wide range of vehicles and equipment, including agricultural and industrial applications
- Adjustable height ranges from 11.8 to 19.7 with a 22 ton (44,000 lb) load capacity
- Features a large V-shape saddle surface area for better contact with the load being supported; Built-in handle allows for easy carrying
- Wide foot base provides added strength and stable support; Includes a limited 1 year manufacturer warranty
- See more on Amazon...
Brand: Torin | Manufacturer: Torin
Dimensions: 13.78 x 16.53 x 18.50 inches | Weight: 72.70 Pounds
Warranty: Limited 1-year manufacturer warranty
See On Amazon #18
Heavy Duty Car Jack Stand, Pin Type Adjustable Height Automotive Jack Stands with Lock, 22 Ton (44,000 lb) Capacity, Red, 1 Pair
Asin: B0D2R9BN9Y | Model: jack stand | PartNumber: jack stand | Ean: 0198290889457 | UPC: 198290889457
Adjustable Height: The Car Jack Stand Can Be Adjusted From 13'' To 19'' According To Your Needs. Equipped 5-Hole Locations In The Support Tube Make Pin-Facilitated Height Adjustment Quick And Easy..
Enhanced Stability And Safety: The Wide Base And Stable Support Arms Provide A Solid And Secure Foundation For The Jack Stand, Minimizing The Risk Of Vehicle Tipping Or Shifting During Repairs And Providing A Safe And Reliable Working Environment..
Large Saddle Support: With A Large Positioning Saddle, This Truck Jack Stand Can Firmly Position The Vehicle, Making The Entire Use More Stable And Secure..
Features
- 22-Ton Pin Jacks: This pair of jack stands features a 22-ton load capacity for unibody vehicles with extra-large support bases. The steel structure of the car jack makes it more durable, rust-proof, and corrosion-resistant.
- Large Saddle Support: With a large positioning saddle, this truck jack stand can firmly position the vehicle, making the entire use more stable and secure.
- Adjustable Height: The car jack stand can be adjusted from 13'' to 19'' according to your needs. Equipped 5-hole locations in the support tube make pin-facilitated height adjustment quick and easy.
- Enhanced Stability and Safety: The wide base and stable support arms provide a solid and secure foundation for the jack stand, minimizing the risk of vehicle tipping or shifting during repairs and providing a safe and reliable working environment.
- See more on Amazon...
Brand: Perbyste | Manufacturer: Perbyste
Warranty: NO
See On Amazon #19
Gooamz 22 Ton (44,000 lb) Heavy Duty Pin Type Professional Car Jack Stand with Lock, Adjustable Height to 20", Wide Base Safety Design for Supporting Trucks, Trailers and Equipment,1 Pair (Red)
Asin: B0CTK9BRWD | Model: JS0521 | PartNumber: JS0521
Adaptable Height Adjustment: Elevate Your Lifting Game With Our Jack Stands Featuring An Adjustable Support Column. This Design Accommodates Varying Height Positions, Catering To A Wide Array Of Vehicles – From Cars And Sedans To Trucks, Suvs, Atvs, And Utvs. The Securely Integrated Steel Pin Prevents Loss, Offering Peace Of Mind As You Adjust And Operate..
Adaptable And Trustworthy: A Choice For Automotive Aficionados And Seasoned Mechanics, These Stands Are Equipped To Handle A Spectrum Of Environments, From The Controlled Conditions Of Garages And Workshops To The Unpredictable Terrain Of Off-Road Locations. The Inclusion Of A Chain Ensures The Locking Pin Remains Affixed To The Stand, Eliminating The Concern Of Misplacement Or Loss.
Durability Meets Portability: Crafted From High-Quality Steel And Coated With A Protective Spray Paint, Our Jack Stands Not Only Deliver Exceptional Durability But Also Resist Rust And Breakage. The Thoughtful Side Handle Design Enhances Portability, Allowing For Convenient Positioning And Effortless Carrying. Embrace A Durable And Portable Solution For All Your Lifting Needs..
Uncompromising Safety And Stability: Engineered With A Sturdy Welded Steel Construction And An Innovative Large Chassis Design, Our Jack Stands Deliver Exceptional Safety And Stability. The Heavy-Gauge Steel Frame Resists Distortion Or Twisting, Providing A Reliable Foundation Under Heavy Loads. Trust In The Robust Build For A Secure Lifting Experience Every Time..
Features
- Robust and Versatile: Our professional heavy-duty jack stands boast an impressive 22-ton (44,000 lbs) capacity, making them a powerhouse solution for a diverse range of vehicles. With a lifting range from 12" to 20", these stands are crafted to address a spectrum of lifting needs with unparalleled precision, ensuring you have the right tool for any job.
- Uncompromising Safety and Stability: Engineered with a sturdy welded steel construction and an innovative large chassis design, our jack stands deliver exceptional safety and stability. The heavy-gauge steel frame resists distortion or twisting, providing a reliable foundation under heavy loads. Trust in the robust build for a secure lifting experience every time.
- Adaptable Height Adjustment: Elevate your lifting game with our jack stands featuring an adjustable support column. This design accommodates varying height positions, catering to a wide array of vehicles from cars and sedans to trucks, SUVs, ATVs, and UTVs. The securely integrated steel pin prevents loss, offering peace of mind as you adjust and operate.
- Durability Meets Portability: Crafted from high-quality steel and coated with a protective spray paint, our jack stands not only deliver exceptional durability but also resist rust and breakage. The thoughtful side handle design enhances portability, allowing for convenient positioning and effortless carrying. Embrace a durable and portable solution for all your lifting needs.
- Adaptable and Trustworthy: A choice for automotive aficionados and seasoned mechanics, these stands are equipped to handle a spectrum of environments, from the controlled conditions of garages and workshops to the unpredictable terrain of off-road locations. The inclusion of a chain ensures the locking pin remains affixed to the stand, eliminating the concern of misplacement or loss
- See more on Amazon...
Brand: Gooamz | Manufacturer: Gooamz
Warranty: 1 year
See On Amazon
Looking For Something Else?
Search